Barbecook Siesta 310 Black Edition Manuale utente

SIESTA 310 BLACK EDITION

223.9231.220

GO TO WWW.BARBECOOK.COM,

REGISTER YOUR BARBECOOK AND

YOUR BARBECOOK EXPERIENCE

WILL BE FURTHER IMPROVED!

THIS IS YOUR UNIQUE SERIAL N°

www.barbecook.com

2

[EN] Go to barbecook.com, register your Barbecook and your Barbecook experience

will be further improved!

[NL] Ga naar barbecook.com, registreer uw Barbecook om uw Barbecook-ervaring

nog meer te verbeteren!

[FR] Rendez-vous sur barbecook.com et enregistrez votre appareil Barbecook pour

nous aider à améliorer votre expérience Barbecook.

[DE] Registrieren Sie lhren Barbecook auf barbecook.com, damit Sie ein noch

umfangreicheres Barbecook-Erlebnis genießen können!

[IT] Visita il sito barbecook.com , registra il tuo Barbecook e sarai ancora piu vicino al

monde Barbecook!

[PL] Przejdź na stronę barbecook.com, zarejestruj swój produkt Barbecook w celu

umoźliwienia statego udoskonalania produktów Barbecook!

www.barbecook.com

3

EN - User guide .....................................................................................5

NL - Gebruiksaanwĳzing ..................................................................... 17

FR - Mode d’emploi .............................................................................29

DE - Bedienungsanleitung ..................................................................41

IT - Guida all’uso ..................................................................................53

PL – Instrukcja użytkownika ............................................................... 65

Illustrations ..........................................................................................77

www.barbecook.com

4

www.barbecook.com

5

EN - USER GUIDE

1 Register your appliance ......................................................6

2 About this manual ............................................................... 6

3 Important safety instructions ..............................................6

• Read and follow the instructions ....................................6

• Be cautious with gas ......................................................6

• Select an appropriate location ........................................ 6

• Safety warnings ..............................................................6

4 Recurrent concepts ............................................................6

• Venturis ...........................................................................6

• Burner hoods ..................................................................7

• Enamel ............................................................................7

• Flare-ups ......................................................................... 7

5 Assembling the appliance ...................................................7

• Safety instructions ..........................................................7

• To assemble the appliance .............................................7

6 Connecting gas to the appliance ........................................ 7

• Which cylinder, hose and regulator? ..............................7

• Safety instructions ..........................................................7

• Connecting the hose to the appliance ............................ 7

• Connecting the hose and cylinder to

the regulator ....................................................................8

• Replacing the cylinder ....................................................9

7 Checking for gas leaks .......................................................9

• Why check for gas leaks? ............................................... 9

• When check for gas leaks? .............................................9

• Safety instructions ..........................................................9

• Which materials do I need? ............................................9

• To check for gas leaks ....................................................9

• In case of a gas leak .......................................................9

8 Getting the appliance ready for use..................................10

• Before each use ............................................................10

• Before ﬁrst use (in a long time) .....................................10

• Burning in the appliance ...............................................10

9 Lighting the burners .......................................................... 10

• Safety instructions ........................................................10

• Lighting the main burners .............................................10

• Lighting the side burner ................................................11

• Switching the burners o .............................................. 11

• Relighting the burners ...................................................11

• Checking the ﬂames .....................................................11

10 Useful tips and tricks ........................................................12

• Preheating the appliance ..............................................12

• Preventing food from sticking .......................................12

• Direct and indirect grilling .............................................12

• Grilling with closed lid ................................................... 12

• Watching the temperature ............................................12

• Taking advantage of the heat zones .............................12

• Avoiding ﬂare-ups .........................................................12

11 Maintaining the appliance ................................................. 12

• Cleaning the grill ...........................................................12

• Cleaning the bowl .........................................................12

• Cleaning the burners and venturis ................................ 12

• Maintaining enamel, stainless steel, chrome and

powder coated parts ....................................................13

• Storing the appliance .................................................... 14

• Storing gas cylinders ....................................................14

• Ordering spare parts ..................................................... 14

12 Warranty ............................................................................14

• Covered ........................................................................14

• Not covered ..................................................................14

13 Technical speciﬁcations .................................................... 14

• Type label ...................................................................... 14

• Injector diameters .........................................................14

14 TROUBLESHOOTING ........................................................15

www.barbecook.com

6

1 REGISTER YOUR APPLIANCE

Thank you for purchasing a Barbecook appliance! A whole new

world is waiting for you to explore, whether it be in the peace

and quiet of nature or amidst the hustle and bustle of the city.

Become a grill master in our #barbecook community and let us

put your grill skills in the spotlight.

Register your Barbecook appliance online and get some major

beneﬁts:

• You get access to the full user manual and get to know

every bit of your appliance.

• You beneﬁt from a personalized after sales service, allowing

you to quickly ﬁnd spare parts and to proﬁt from an optimal

warranty service.

• We inform you about product updates and give you tips,

tricks and grillspiration to bring out the grill master in you.

Ready for an adventure? Register your product and join the

#barbecook community!

For more information about registering your appliance,

refer to www.barbecook.com.

Barbecook respects your privacy. Your data will not be

sold, distributed or shared with third parties.

2 ABOUT THIS MANUAL

This manual is composed of two parts:

• The ﬁrst part is what you are reading now. It includes

instructions for the assembly, use and maintenance of your

appliance.

• The second part starts on page 73. It includes all kinds of

illustrations (exploded views, assembly drawings...) of the

appliances that are described in this manual.

3 IMPORTANT SAFETY

INSTRUCTIONS

3.1 Read and follow the instructions

Read the instructions before using the appliance. Always follow

the instructions carefully. Assembling or using the appliance

dierently can cause ﬁres and material damage.

Damages caused by not following the instructions

(improper assembly, misuse, inadequate maintenance...)

are not covered by the warranty.

3.2 Be cautious with gas

Working with gas is perfectly safe, but requires some extra

caution:

• Always store gas cylinders outdoors, in a well-ventilated

area. Make sure they are not exposed to excessive heat or

direct sunlight.

• Never store your gas cylinder or spare gas cylinder in the

cabinet of your appliance.

• Never store your spare gas cylinder near a gas appliance in

use.

• Turn o the gas supply at the gas cylinder after use.

• Never smoke near a gas appliance in use of near a gas

cylinder (full/empty).

If you smell gas, immediately close the gas supply,

extinguish all ﬂames and open the lid of the appliance.

If the smell lasts, call your gas supplier or the ﬁre

department.

3.3 Select an appropriate location

Use the appliance outdoors only. Using it indoors, even in a

garage or shed, can cause carbon monoxide poisoning.

When selecting an outdoor location, always:

• Place the appliance at least three meters away from any

building, in an open and well-ventilated area.

• Make sure there is a free air ﬂow to the burners and the vent

holes in the cabinet at all times.

• Make sure the appliance is not under an overhanging

structure (a porch, a shelter ... ) or under foliage.

• Put the appliance on a ﬁrm and stable surface. Never put it

on a moving vehicle (a boat, a trailer ... ).

3.4 Safety warnings

• Use outdoors only.

• Read the instructions before using the appliance.

• Do not move the appliance during use.

• Do not leave the appliance unattended during use,

especially in the presence of children and animals.

• WARNING: accessible parts may be very hot. Keep young

children away.

• Use appropriate protection when handling hot parts (lid,

grill ... ).

• This appliance must be kept away from ﬂammable materials

during use.

• Do not use wood, charcoal, lava rocks or ceramic briquettes

on a gas appliance.

• Do not use the appliance when you have consumed alcohol

or taken drugs.

• Turn o the gas supply at the gas cylinder after use.

• Do not modify the appliance.

4 RECURRENT CONCEPTS

This part includes deﬁnitions of some less familiar concepts.

These concepts are used in several topics of the manual.

4.1 Venturis

The venturis are the small tubes attached to the entrance of the

burners. At the side of the venturis, there is a hole. This is visible

on the main burners and on the side burner:

www.barbecook.com

7

When the gas is on its way to the burners, it passes through the

venturis. Thanks to the holes at the sides, the gas is then mixed

with air and - as a result - with oxygen. This is necessary for a

good ignition in the burners: only the correct mixture of gas and

oxygen will ignite properly and will result in nice ﬂames.

4.2 Burner hoods

The burner hoods are the hoods that you mount above the

burners of your appliance. They protect the burners from

dripping fat. The holes at the sides of the hoods also distribute

the heat over the grill, so it is heated much taster and more

evenly.

4.3 Enamel

Some parts of the appliance are covered in a layer of melted

glass, called enamel. This enamel protects the underlying metal

from corrosion. Enamel is a high-quality material: it is resistant to

rust, does not fade under the inﬂuence of high temperatures and

is very easy to maintain.

Because the enamel is less ﬂexible than the metal which

the appliance incorrectly. To avoid problems, be careful

when assembling enamelled parts and always maintain

the enamel as described further in this manual.

4.4 Flare-ups

Flare-ups are sudden ﬂames that spark from the bowl when you

are grilling. They are usually caused by dripping fat or marinade.

5 ASSEMBLING THE APPLIANCE

5.1 Safety instructions

• Do not modify the appliance when assembling it. lt is very

dangerous and not allowed to alter parts that are pre-

assembled and/or sealed by the manufacturer.

• Always follow the assembly instructions carefully.

• The user is responsible for the correct assembly of the

appliance. Damages caused by improper assembly are not

covered by the warranty.

5.2 To assemble the appliance

You need a cross-slotted screwdriver, a ﬂat-slotted screwdriver

and an AA battery (electrical igniter). There are no batteries

supplied with the appliance.

1. Put the appliance on a ﬂat and clean surface.

2. Assemble the appliance as shown on the assembly

drawings. You ﬁnd them in the second part of this manual,

after the exploded view of your appliance.

Be careful when assembling enamelled parts. The tools

and screws may damage the enamel. Use the provided

ﬁber washers to protect the enamel around the screws.

The blister packs can contain more screws than

necessary. Screws can be left over after the assembly.

The package includes an emergency kit with spare

assembly parts (screws, beits, ﬁber washers ... ) You can

use them in case you lost or broke some parts.

6 CONNECTING GAS TO THE

APPLIANCE

6.1 Which cylinder, hose and regulator?

To connect gas to the appliance, you need a gas cylinder, hose

and pressure regulator. The hose and regulator are supplied with

the appliance, the cylinder is not.

Which cylinder, hose and regulator you have to use, depends on

the country you live in.

This barbecue has been adjusted to be operate with 4,5

to 15 kg butane/propane cylinders with an appropriate

low pressure regulator. We recommend connecting the

appliance to propane. Propane oers a high-quality

combustion and is less sensitive to frost. The height H of

the cylinder must be less than 70 cm, regardless of the

cylinder’s width or diameter D.

Buy your pressure regulator and gas cylinder together.

Not all regulators ﬁt all cylinders.

Use only a gas hose and regulator that is homologated

for the country of use.

6.2 Safety instructions

• Never connect the cylinder directly to the appliance. Always

mount a pressure regulator on the cylinder ﬁrst.

• Never modify pre-assembled or sealed parts of the cylinder,

the hose or the pressure regulator.

• Keep the hose as short as possible (1,5 m maximum) to

prevent it from dragging on the ground.

• Never distort or twist the hose. Do not pull or pierce

the hose.Keep the hose away from any parts of the

barbecue that get hot. Check that the ﬂexible hose

stretches out normally, without twisting or pulling.

• It should be replaced if it is damaged or cracked, when

required by national regulations or at the end of the part

lifecycle (f.ex France)

• Never open the gas supply.

• Always keep the cylinder in an upright position.

• Check for leaks each time you make changes to the gas

connection. See “7 Checking for gas leaks”.

DE

Propane, 50 mbar /

Butane, 50 mbar

CH

Propane, 50 mbar /

Butane, 50 mbar

AT

Propane, 50 mbar /

Butane, 50 mbar

Country

Cylinder, hose and

regulator

www.barbecook.com

8

6.3 Connecting the hose to the appliance

1. Locate the gas tube of your appliance.

2. Screw the gas hose on the gas tube (A) and tighten it with

two spanners. Hold the tube with one spanner, while turning

the hose with the other spanner (B).

It should be used with ﬂexible hose that is suitable for use

with butane and propane gas. Hose length should not

exceed 1.50 m.

6.4 Connecting the hose and cylinder to

the regulator

You need a 17 mm spanner and an adjustable spanner.

1. Screw the hose on the pressure regulator and tighten it with

a 17 mm spanner (A).

2. Screw the regulator clockwise on the cylinder and tighten it

with an adjustable spanner (B).

Use only regulators complying with EN 16129.

6.5 Replacing the cylinder

1. Close the gas supply and set all control knobs to OFF.

2. Disconnect the empty cylinder and connect the full cylinder.

3. Check the cylinder, the hose and all gas connections for

leaks. See “7 Checking for gas leaks”.

Attention, when changing the gas cylinder, this should

always be carried out away from any source of ignition.

7 CHECKING FOR GAS LEAKS

7.1 Why check for gas leaks?

Propane and butane are heavier than air. As a result, they do

not ﬂoat away when leaking from the appliance. Especially

on windless days, a leak can cause the gas to collect in and

around the appliance. That accumulated gas can then ignite and

explode.

7.2 When check for gas leaks?

• Before the ﬁrst use or before the ﬁrst use after a long period

of non-use.

Also check for gas leaks if your appliance was assembled

by your dealer.

• Each time you replace a gas component.

• At least once a year, preferably at the beginning of the

season.

7.3 Safety instructions

• Put the appliance outdoors, in a well-ventilated area. Make

sure there are no ﬂames or heat sources near the appliance.

• Never use a lighter or match to check for gas leaks.

• Do not smoke and do not light the burners when checking

for gas leaks.

7.4 Which materials do I need?

To check for gas leaks, you need:

• A testing liquid. You can use a ready-made leak spray or a

mixture of water (50%) and dish-washing soap (50%).

• The leak test tool that came with your appliance. You

use it to suck up the testing liquid and apply it to the gas

component or connection that you want to check.

A

B

A

B

www.barbecook.com

9

7.5 To check for gas leaks

You check for gas leaks by applying a testing liquid to all gas

components and connections. lf the bubbles on a particular

component or connection grow, there is gas leak:

To check for gas leaks, proceed as follows:

1. Put the appliance outside.

2. Get your leak test tool and testing liquid (leak spray or

water/soap mixture).

3. Open the lid and set all control knobs to OFF.

4. Open the gas supply slightly. Turn the valve of the gas

cylinder only once.

5. Suck up some testing liquid with the leak test tool and apply

it to the area that you want to check. You have to check:

• The welds of the gas cylinder (A)

• The hose (B)

• The connections between the cylinder and the pressure

regulator and between the pressure regulator and the

hose (C)

• The connection between the hose and the appliance (D)

Your pressure regulator and coupling may be dierent

from the ones in the illustrations.

6. Do one of the following:

• If you detect a leak, continue as described in “In case of

a gas leak”.

• If there are no leaks, close the gas supply, rinse all

components thoroughly with water and dry them well.

7.6 In case of a gas leak

1. Close the gas supply and do one of the following:

• If you detected a leak on one of the connections, tighten

that connection.

• If you detected a leak on the cylinder or hose, replace

the cylinder or hose.

2. Recheck the connection or component on which you

detected the leak.

3. If the leak is not repaired, contact a Barbecook dealer. Do

not use the appliance until the leak is repaired.

For a list of nearby Barbecook dealers, refer to

www.barbecook.com.

8 GETTING THE APPLIANCE READY

FOR USE

8.1 Before each use

Each time you use the appliance, make sure that:

• The appliance is in an appropriate location. See “3.3 Select

an appropriate location”.

• The gas hose does not drag on the ground and cannot

come into contact with a hot surface or with dripping fat.

• The bowl is clean. We recommend cleaning the bowl after

each use. See “11.2 Cleaning the bowl”.

• The burners and venturis are not blocked by insect nests or

spider webs. See “11.3 Cleaning the burners and venturis”.

• The burners are assembled correctly. The venturis have to

be placed over the openings of the gas valves.

lf you want to be absolutely sure that your gas connection

is okay, you can check your appliance on gas leaks

before each use. See “7 Checking for gas leaks”.

8.2 Before ﬁrst use (in a long time)

lf you use the appliance for the ﬁrst time or for the ﬁrst time

after a long period of non-use, you have to execute some extra

checks:

• Make sure that you have read, understood and checked all

the instructions in this manual (only before ﬁrst use).

• Check the appliance for gas leaks. See “7 Checking for gas

leaks”.

Also check for gas leaks if your appliance was assembled

by your dealer.

• Clean the burners and venturis (only before ﬁrst use in a

long time) . See “11.3 Cleaning the burners and venturis”.

• Burn in the appliance before you put any food on it (only

before ﬁrst use). See “8.3 Burning in the appliance”.

www.barbecook.com

10

8.3 Burning in the appliance

By burning in the appliance before the ﬁrst use, you remove

remaining manufacturing greases from the appliance. Proceed

as follows:

1. Light the main burners and set their control knobs to HIGH.

See “9.2 Lighting the main burners”.

2. Close the lid and let the appliance burn for 15 minutes. Do

not put any food on the grill yet.

3. After 15 minutes, open the lid and let the appliance burn for

another 5 minutes (control knobs still set to HIGH).

4. After 5 minutes, the appliance is ready for use. You can now

put food on the grill.

9 LIGHTING THE BURNERS

To light the burners with the electrical igniter, you have

to install an AA battery in the igniter. That battery is not

supplied with the appliance. You can ﬁnd the battery case

of the igniter at the inside of the front panel of the right

side table.

9.1 Safety instructions

• Before you light the appliance, execute all checks listed in

“8 Getting the appliance ready for use”.

• Make sure the lid is always open when you light a burner .

• Never bend directly over a burner when lighting it.

9.2 Lighting the main burners

9.2.1 Using the igniter

1. Open the lid and set the control knobs of the main burners

to OFF.

2. If no other burner is lit yet, open the gas supply and wait ten

seconds. This allows the gas to stabilize.

3. Push in the control knob of one burner, set it to HIGH and

hold it for a moment. The build-in igniter will cause sparks,

which will light the burner.

Always light one main burner to start with. Never light all

main burners at the same time.

4. If the burner does not light after three attempts, set its

control knob to OFF, close the gas supply and wait 5

minutes. This allows any accumulated gas to escape.

5. Retry lighting the burner. If it still does not light, try lighting it

with a match or refer to “14 Troubleshooting” to determine

the cause of the problem.

9.2.2 Using a match

1. Place a match in the match holder.

2. Open the lid and set the control knobs of the main burners

to OFF.

3. lf no other burner is lit yet, open the gas supply and wait ten

seconds. This allows the gas to stabilize.

4. Light the match and hold it about 13 mm from the burner.

5. Set the control knob of one burner to HIGH.

Always light one main burner to start with. Never light all

main burners at the same time.

6. lf the burner does not light within 5 seconds, set its control

knob to OFF, close the gas supply and wait 5 minutes. This

allows any accumulated gas to escape.

7. Retry lighting the burner. lf it still does not light, refer to “14

Troubleshooting” to determine the cause of the problem.

8. Once one burner is lit, light the other burners by setting their

control knobs to HIGH.

9.3 Lighting the side burner

The side burner can only carry pots with a maximum

weight of 9 kg, maximum diameter of 220 mm and

minimum diameter of 120 mm.

9.3.1 Using the igniter

1. Open the lid and set the control knob of the side burner to

OFF.

2. If no other burner is lit yet, open the gas supply and wait ten

seconds. This allows the gas to stabilize.

3. Push in the control knob of the side burner, set it to HIGH

and hold it for a moment. The build-in igniter will cause

sparks, which will light the side burner.

4. If the burner does not light after three attempts, set its

control knob to OFF, close the gas supply and wait 5

minutes. This allows any accumulated gas to escape.

6. Retry lighting the side burner. If it still does not light, try

lighting it with a match or refer to “14 Troubleshooting” to

determine the cause of the problem.

9.3.2 Using a match

1. Place a match in the match holder.

2. Open the lid and set the control knob of the side burner to

OFF.

3. lf no other burner is lit yet, open the gas supply and wait ten

seconds. This allows the gas to stabilize.

4. Light the match and hold it about 13 mm from the side

burner.

www.barbecook.com

11

5. Set the control knob of the side burner to HIGH.

6. lf the side burner does not light within 5 seconds, set

its control knob to OFF, close the gas supply and wait 5

minutes. This allows any accumulated gas to escape.

7. Retry lighting the side burner. lf it still does not light, refer to

“14 Troubleshooting” to determine the cause of the problem.

9.4 Switching the burners o

lf you no longer use the burners, you have to switch them o.

Proceed as follows:

1. Close the gas supply.

2. Set the control knobs of the burners to OFF.

By closing the gas supply ﬁrst, you make sure there is no

gas left in the appliance.

9.5 Relighting the burners

lf a burner goes out while in use, proceed as follows:

1. Open the lid and close the gas supply.

2. Set all control knobs to OFF and wait 5 minutes. This allows

any accumulated gas to escape.

3. Relight the burner(s).

9.6 Checking the ﬂames

Each time you light a burner, you have to check its ﬂames. A

perfect ﬂame is almost completely blue, with some yellow at the

top. Sporadic yellow ﬂames are normal and not harmful.

lf there is something wrong with the ﬂames, do one of the

following to solve the problem:

10 USEFUL TIPS AND TRICKS

10.1 Preheating the appliance

By preheating your appliance, you make sure the grill is hot

enough by the time you put food on it. Proceed as follows:

1. Light the burner(s) and set their control knob(s) to HIGH.

2. Close the lid and leave the appliance for ten minutes.

3. After ten minutes, open the lid and put your food on the grill.

4. lf you need less heat now, set the control knob(s) to a lower

position.

10.2 Preventing food from sticking

To prevent your food from sticking to the grill:

• Oil the food lightly with a brush before you put it on the grill.

You can also oil the grill itself.

• Preheat the appliance. The warmer the grill when you put

food on it, the less the food will stick.

• Do not turn the food too quickly. Let it catch some heat ﬁrst.

LOW HIGH

If the ﬂames are... Do the following...

Low and entirely yellow

Higher than the bowl

1. Immediately close the gas

supply and set all control

knobs to OFF.

2. Refer to “Troubleshooting”

to determine the cause of

the problem. Most likely, the

venturis are blocked.

1. Immediately close the gas

supply and set all control

knobs to OFF.

2. Wait 5 minutes to allow any

accumulated gas to escape.

3. Relight the burner(s).

4. If the problem persists, refer to

“Troubleshooting” to determine

the cause of the problem.

www.barbecook.com

12

10.3 Direct and indirect grilling

Depending on the type of food you are preparing and on how

you want to prepare it, you can grill directly or indirectly:

When grilling under a closed lid, always keep an eye on

the lid thermometer to make sure the appliance does not

get too hot. See “10.5 Watching the temperature”.

10.4 Grilling with closed lid

Closing the lid while grilling has some important advantages:

• The temperature of the grill is higher and remains more

constant.

• You reduce the cooking time of your food and keep your

food more moist.

• You reduce ﬂare-ups and save gas.

When grilling under a closed lid, always keep an eye on

the lid thermometer to make sure the appliance does not

get too hot. See “10.5 Watching the temperature”.

10.5 Watching the temperature

Your appliance is equipped with powerful burners, so it heats

up rapidly and you can keep the temperature steady. When

grilling under a closed lid, however, you have to make sure

that the appliance does not get too hot. Keep an eye on the lid

thermometer and take into account the following guidelines:

• A normal cooking temperature is about 210 °C. At higher

temperatures, dripping and accumulated fat can ignite.

• The temperature should never be over 300 °C for more than

ﬁve minutes. This can damage and deform the appliance.

lf the appliance gets too hot, cool it down by opening the

lid and setting the burners to a lower position.

10.6 Taking advantage of the heat zones

When all burners are lit, the burner hoods distribute the heat as

evenly as possible over the grill. Despite this even heating, some

zones are still hotter than others. You can take advantage of

these heat zones to grill your food to perfection:

You can also create heat zones by playing with the power

of the burners. You can, for example, set a burner to a

lower position and use the zone above that burner for

delicate food or food that needs some time to cook.

10.7 Avoiding ﬂare-ups

During grilling, some ﬂare-ups are normal. Too many ﬂare-ups,

however, increase the temperature in the appliance and can

ignite accumulated fat. To avoid ﬂare-ups:

• Make sure the bowl is clean when you start grilling. We

recommend cleaning the bowl after each use. See “11.2

Cleaning the bowl”.

• Regularly check if the fat drain hole is not blocked and if the

fat drip tray or cup is not full yet.

• When grilling fatty meat, trim excess fat, close the lid and

set the burners to a medium or low position.

11 MAINTAINING THE APPLIANCE

11.1 Cleaning the grill

We recommend cleaning the grill after each use, with a

Barbecook cleaner.

You can also clean the grill with a soft detergent or with

sodium bicarbonate. Never use oven cleaners on the grill.

11.2 Cleaning the bowl

We recommend cleaning the bowl after each use, with a

Barbecook cleaner. Use it the same way you do on the grill.

11.3 Cleaning the burners and venturis

11.3.1 Why clean the bUrners and ventUris?

Spiders and insects can make webs and nests in the burners

and venturis. This may block the gas supply to the burners. As a

result:

• You cannot light the burners. lf you manage to light them

anyway, they will only produce smoky and yellow ﬂames.

• The gas can start burning outside the venturis, at the control

knobs. These ﬁres are called ﬂash-backs and can result in

serious injuries and material damage.

Damages caused by blocked burners and venturis are

regarded as inadequate maintenance and are not covered

by the warranty.

11.3.2 When clean the bUrners and ventUris?

You have to clean the burners and venturis of your appliance:

• Before the ﬁrst use after a long period of non-use.

• At least twice a year, of which once at the beginning of the

season.

Use

Put your food next to

a lit burner, set that

burner to a medium/

low position and close

the lid.

Direct To sear meat and

vegetables

To further cook

seared meat

Indirect

Description

Put your food directly

above a lit burner, set

that burner to a high

position and keep the

lid open.

Method

Use to...

Hotter

Front Grill delicate food (prawns, ﬁsh...)

Prepare food that needs some time to

cook (e.g. sausages, chicken ties ... )

Center

Hot

Zone

Hottest

Back

Sear meat and vegetables

www.barbecook.com

13

11.3.3 to clean the bUrners and ventUris

1. Remove the burners from the appliance as shown on the

illustrations. lf you notice that a burner is damaged, you

have to replace it.

2. Clean the burners and venturis with a small brush or a

homemade pipe cleaner (an unfolded paperclip, a pipe

brush ... ).

3. Put the burners back. Make sure to place the venturis over

the openings of the gas valves.

11.4 Maintaining enamel, stainless steel,

chrome and powder coated parts

The appliance is composed of enamelled, stainless steel,

chromed and powder coated parts. Each material has to be

maintained dierently:

To prevent formation of rust on stainless steel, avoid

contact with chlorine, salt and iron. We recommend not

using the appliance near the coast, near railways or near

swimming pools.

Damages caused by not following these instructions are

regarded as inadequate maintenance and are not covered

by the warranty.

Below the exploded view of your appliance (second part of the

manual), you ﬁnd a list with all parts of which the appliance

is composed. This list includes a symbol that speciﬁes the

material of each part, so you can use it to check how you have

to maintain a particular part. The parts list uses the following

symbols:

Material

How to maintain this material

Stainless steel

and chrome

Enamel

Powder coated

• Do not use aggressive, abrasive or

metal detergents.

• Use soft detergents and let them

act on the steel.

• Use a soft sponge or cloth.

• Rinse thoroughly after cleaning

and dry well before storing.

• Do not use sharp objects and do

not knock against a hard surface.

• Avoid contact with cold liquids

while still hot.

• You can use metal sponges and

abrasive detergents.

• Do not use sharp objects. Use soft

detergents and a soft sponge or

cloth.

• Rinse thoroughly after cleaning

and dry well before storing.

A

B

Symbol

Material

Enamel

Stainless steel

Chrome

Powder coated

www.barbecook.com

14

11.5 Storing the appliance

lf you do not use your appliance for a longer period of time, store

it in a dry place. Before you store the appliance:

• Disconnect the gas cylinder. Never store your appliance

indoors (not even in a garage or shed) as long as it is

connected to the gas cylinder.

• Clean the burners and the grills, rub them with oil and wrap

them in paper.

• Cover your appliance with a Barbecook cover. Register your

appliance at www.barbecook.com to ﬁnd out which cover

you need.

11.6 Storing gas cylinders

These instructions apply to both empty and full gas cylinders.

• Always store gas cylinders outdoors, in a well-ventilated

area. Make sure they are not exposed to excessive heat or

direct sunlight.

• Never store a gas cylinder in an area that can become very

hot (in a car, on a boat...).

• Never store your gas cylinder or spare gas cylinder in the

cabinet of your appliance.

• Never store your spare gas cylinder near a gas appliance in

use.

• Always store gas cylinders outside the reach of children.

• Always store and transport gas cylinders in upright position.

11.7 Ordering spare parts

Parts that are directly exposed to ﬁre or intense heat have to be

replaced from time to time. To order a spare part:

1. Look up the reference number of the part you need. You

ﬁnd a list of all reference numbers below the exploded views

in the second part of this manual and on www.barbecook.

com.

If you registered your appliance online, you will

automatically be guided to the correct list in your

MyBarbecook account. There you have the possibility to

order your parts online.

2. Order the spare part via www.barbecook.com or at your

point of sale. Parts under warranty can only be ordered at

your point of sale.

12 WARRANTY

12.1 Covered

Your appliance comes with a warranty of two years, starting from

the date of purchase. This warranty covers all manufacturing

defects, provided that:

• You used, assembled and maintained your appliance

according to the instructions in this manual. Damages

caused by misuse, incorrect assembly or inadequate

maintenance are not regarded as manufacturing defects.

• You can present the receipt and the unique serial number of

your appliance. This serial number starts with a G, followed

by 15 digits. You can ﬁnd it:

- On this manual.

- On the packaging of the appliance.

- On the inside of the bottom front panel.

• The Barbecook quality department conﬁrms that the parts

are defective and that they proved defective under normal

use, correct assembly and adequate maintenance.

lf one of the above conditions is not met, you cannot claim any

form of contribution. In all cases, the warranty is limited to the

repair or replacement of the defective part(s).

12.2 Not covered

The following damages and defects are not covered by the

warranty:

• Normal wear and tear (rusting, distortion, discolouration...)

of parts that are directly exposed to ﬁre or intense heat. It is

normal to replace these parts from time to time.

• Visual irregularities that are inherent to the manufacturing

process. These irregularities are not regarded as

manufacturing defects.

• All damages caused by inadequate maintenance, incorrect

storage, improper assembly or modiﬁcations made to

pre-assembled parts.

• All damages caused by misuse and abuse of the appliance

(not using it according to the instructions in this manual,

using it for commercial purposes, using it as a ﬁre basket...).

• All consequential damages caused by careless or

non-compliant use of the appliance.

• Rust or discolouration caused by external inﬂuences, the

use of aggressive detergents, exposure to chlorine... These

damages are not regarded as manufacturing defects.

13 TECHNICAL SPECIFICATIONS

13.1 Type label

The type label lists all the technical speciﬁcations of your

appliance. You can ﬁnd it:

• In the second part of this manual.

• On the inside of the bottom front panel

13.2 Injector diameters

• Main burner: 0.83

• Side burner: 0.76

www.barbecook.com

15

14 TROUBLESHOOTING

Problem Probable cause(s) Solution(s)

• Gas supply not open

• Venturis not placed over openings of gas valves

• Burner openings blocked

• Gas cylinder (almost) empty

• Pressure regulator not connected correctly to

cylinder and/or hose

Some heat dierences are normal, see “10.6 Taking

advantage of the heat zones”. Probable cause(s) for

big heat dierences:

• Appliance not preheated

• Food too fatty

• Fat drain hole blocked, fat in bowl and/or fat on

burners

• Temperature too high

• Burners or venturis blocked

• Salt on burners

• Appliance connected to butane

• Burner blocked, pierced or rusted

• Burners or venturis blocked

• Lots of wind

• Gas cylinder (almost) empty

• Fat in bowl or on burners

• Hot weather

• New (full) gas cylinder

• Gas injector, venturi and/or burner dirty

• Burner or venturi blocked

• No gas supply

• No battery installed or battery not installed

correctly

• Middle burner not lit ﬁrst

• lgniter wiring not mounted correctly

• Electrode damaged

• Faulty ground

• Faulty igniter

• No battery installed or battery not installed

correctly

• Empty battery

• lgniter button not assembled correctly

• Faulty spark generator

• Faulty ground

• Low battery

• Wet or broken electrodes

• Faulty wiring

• Faulty ground

• Burner and electrode too far apart

Not enough heat

Heat not distributed evenly over

grill surface

Excessive heat and/or ﬂare-ups

Yellow ﬂames

Flash-backs (ﬂames outside

venturis/at control knobs)

Flames higher than edge of

bowl

Pressure regulator hums

Burner whistles when set to

LOW

Impossible to light burner

(using either igniter or match)

lmpossible to light burner with

igniter

No sparks nor sound when

pressing igniter

Sparks present, but not on all

electrodes and/or not powerful

enough

Sparks present that do not

originate from burners

Only sound (no sparks) when

pressing igniter

Incomplete ﬂame

• Open gas supply

• Place venturis over openings of gas valves

• Clean burner openings or replace burners

• Replace gas cylinder

• Reconnect pressure regulator to cylinder and/

or hose

• Preheat appliance

• Trim excess fat or set burners to a low position

• Clean fat drain hole, bowl and burners

• Set burners to a lower temperature and/or grill

food indirectly

• Clean burners and venturis

• Clean burners

• Connect appliance to propane, using an

appropriate pressure regulator

• Clean or replace burner

• Close gas supply and set burners to OFF.

• Let appliance cool down.

• Clean burners and venturis.

• Put appliance with rear side towards wind

• Replace gas cylinder

• Clean bowl or burners

• Not a hazard or defect. Should stop

automatically after a while.

• Clean gas injector, venturi and burner

• Clean burner and venturi

• Open gas supply and press safety knob on

pressure regulator (not present on all regulators)

• (Re)install battery, with terminals positioned

correctly

• Light the middle burner ﬁrst

• Check and re-assemble all igniter connections

• Replace electrode

• Check and re-assemble electrodes, burners

and igniter

• Replace igniter

• (Re)install battery, with terminals positioned

correctly

• Replace battery

• Re-assemble igniter button

• Replace spark generator

• Reconnect spark generator and electrodes

• Replace battery

• Dry electrodes with paper towels or replace

electrodes

• Replace wiring

• Reconnect spark generator and electrodes

• Slightly bend electrode to bring it closer to the

burner

www.barbecook.com

16

www.barbecook.com

17

NL - GEBRUIKSAANWĲZING

1 Uw toestel registreren .......................................................18

2 Over deze handleiding ......................................................18

3 Belangrĳke veiligheidsinstructies ...................................... 18

• De instructies lezen en opvolgen ..................................18

• Voorzichtig omspringen met gas ..................................18

• Een geschikte locatie kiezen .........................................18

• Veiligheidsinstructies ....................................................18

4 Terugkerende concepten . ................................................18

• Venturibuizen ................................................................18

• Branderkappen .............................................................19

• Email .............................................................................19

• Opﬂakkeringen ..............................................................19

5 Het toestel monteren ........................................................19

• Veiligheidsinstructies ....................................................19

• Het toestel monteren ....................................................19

6 Het toestel van gas voorzien ............................................19

• Welke gasﬂes, slang en regelaar? ...............................19

• Veiligheidsinstructies ....................................................19

• De slang aansluiten op het toestel ................................20

• De slang en gasﬂes aansluiten op de regelaar .............20

• De gasﬂes vervangen ...................................................20

7 Controleren op gaslekken ................................................. 20

• Waarom controleren op gaslekken? .............................20

• Wanneer controleren op gaslekken? ............................20

• Veiligheidsinstructies ....................................................20

• Welke materialen heb ik nodig? .................................... 20

• Controleren op gaslekken ............................................. 21

• In geval van een gaslek.................................................21

8 Het toestel klaarmaken voor gebruik ................................21

• Voor elk gebruik ............................................................21

• Voor het eerste gebruik (of na een lange

periode van ongebruik) .................................................21

• Het toestel inbranden....................................................22

9 De branders ontsteken .....................................................22

• Veiligheidsinstructies ....................................................22

• De hoofdbranders ontsteken ........................................22

• De zĳbrander ontsteken ................................................22

• De branders uitschakelen .............................................23

• De branders opnieuw ontsteken ................................... 23

• De vlammen controleren ............................................... 23

10 Handige tips ......................................................................23

• Het toestel voorverwarmen ...........................................23

• Voorkomen dat voedsel aankleeft ...............................23

• Rechtstreeks en onrechtstreeks grillen .........................23

• Grillen met gesloten deksel ..........................................24

• De temperatuur controleren .......................................... 24

• De warmtezones benutten ............................................ 24

• Opﬂakkeringen vermĳden .............................................24

11 Het toestel onderhouden ..................................................24

• Het rooster reinigen ......................................................24

• De kuip reinigen ............................................................24

• De branders en venturibuizen schoonmaken ...............24

• Geëmailleerde, roestvaststalen, verchroomde

en gepoederlakte onderdelen onderhouden ................25

• Het toestel opbergen ....................................................26

• Gasﬂessen bewaren .....................................................26

• Reserveonderdelen bestellen .......................................26

12 Garantie ............................................................................26

• Gedekt ..........................................................................26

• Niet gedekt ...................................................................26

13 Technische gegevens .......................................................26

• Typelabel ....................................................................... 26

• Diameters van de injectoren .........................................26

14 Problemen oplossen ...........................................................27

www.barbecook.com

18

1 UW TOESTEL REGISTREREN

Bedankt voor uw aankoop van een Barbecook-toestel! Er wacht

u een hele nieuwe wereld om te ontdekken, of dat nu in de rust

van de natuur of in de gonzende stad is. Word een grillmaster in

onze #barbecook community en laat ons uw grillvaardigheden in

de schijnwerpers zetten.

Registreer uw Barbecook-toestel online en geniet van enkele

fantastische voordelen:

• U krijgt toegang tot de volledige gebruikershandleiding

zodat u uw toestel tot in het kleinste onderdeeltje leert

kennen.

• U krijgt van een gepersonaliseerde naverkoopservice,

waardoor u snel reserveonderdelen kunt vinden en geniet

van een optimale garantieservice.

• We informeren u over productupdates en geven u tips, tricks

en grillspiratie om de grillmaster in u naar boven te halen.

Klaar voor een avontuur? Registreer uw toestel en word lid van

de #barbecook community!

Voor meer informatie over het registreren van uw toestel

gaat u naar www.barbecook.com.

Barbecook respecteert uw privacy. Uw gegevens worden

niet verkocht, verspreid of doorgegeven aan derden.

2 OVER DEZE HANDLEIDING

Deze handleiding bestaat uit twee delen:

• Het eerste deel is het deel dat u momenteel leest. Hier vindt

u instructies om uw toestel te monteren, te gebruiken en te

onderhouden.

• Het tweede deel begint op pagina 73. Daarin vindt u diverse

illustraties (explosietekeningen, montagetekeningen ... ) van

het toestels die in deze handleiding beschreven zijn.

3 BELANGRIJKE

VEILIGHEIDSINSTRUCTIES

3.1 De instructies lezen en opvolgen

Lees de instructies voor u het toestel in gebruik neemt. Volg de

instructies altĳd zorgvuldig. Als het toestel op een andere wĳze

wordt gemonteerd of gebruikt, kan dit brand en materiële schade

tot gevolg hebben.

Schade wegens het niet opvolgen van de instructies

(verkeerde montage, misbruik, verkeerd onderhoud enz.)

wordt niet gedekt door de garantie.

3.2 Voorzichtig omspringen met gas

Werken met gas is erg veilig, maar u dient enkele

voorzorgsmaatregelen in acht te nemen:

• Bewaar gasﬂessen altijd buitenshuis in een goed

geventileerde ruimte. Zorg ervoor dat de ﬂessen niet

blootgesteld worden aan hoge temperaturen of direct

zonlicht.

• Bewaar uw gasﬂes of reservegasﬂes nooit in de kast van het

toestel.

• Bewaar uw reservegasﬂes nooit in de buurt van een toestel

op gas dat in gebruik is.

• Draai na het gebruik altijd de gastoevoer aan de gasﬂes

dicht.

• Rook nooit in de buurt van een toestel op gas dat in gebruik

is of in de buurt van een gasﬂes (vol/leeg).

Als u gas ruikt, draait u onmiddellĳk de gastoever

dicht, dooft u alle vlammen en opent u het deksel

van het toestel. Als de geur aanhoudt, belt u naar uw

gasleverancier of de brandweer. department.

3.3 Een geschikte locatie kiezen

Gebruik het toestel alleen buitenshuis. Als u het toestel

binnenshuis gebruikt, zelfs in een garage of schuur, bestaat er

gevaar voor vergiftiging door koolmonoxide.

Let op het volgende wanneer u een locatie kiest:

• Plaats het toestel op minstens drie meter van een gebouw,

op een open en goed geventileerde plaats.

• Zorg ervoor dat er altijd voldoende vrije lucht naar de

branders en naar de ventilatiegaten in de kast kan stromen.

• Plaats het toestel niet onder een overhangende structuur

(veranda, afdak ... ) of onder gebladerte.

• Plaats het toestel op een stevige en stabiele ondergrond.

Plaats het toestel nooit op een bewegend voertuig (boot,

oplegger ... ).

3.4 Veiligheidsinstructies

• Alleen buiten gebruiken.

• Lees de instructies voor ingebruikname.

• Toestel niet verplaatsen tĳdens gebruik.

• Laat het toestel niet alleen achter terwĳl deze in gebruik is,

en dit zeker niet als er kinderen of dieren aanwezig zĳn.

• WAARSCHUWING: Aanraakbare delen kunnen erg heet zĳn.

Houdt jonge kinderen op afstand.

• Gebruik geschikte bescherming wanneer u hete onderdelen

(deksel, rooster enz.) moet vastnemen.

• Dit toestel gedurende gebruik verwĳderd houden van

ontvlambare materialen.

• Gebruik geen hout, houtskool, lavastenen of keramische

briketten in een gastoestel.

• Gebruik het toestel niet als u alcohol hebt gedronken of

drugs hebt gebruikt.

• Gastoevoer op de gasﬂes afsluiten na gebruik.

• Toestel niet aanpassen of modiﬁceren.

4 TERUGKERENDE CONCEPTEN

Dit deel omvat deﬁnities van een aantal minder vertrouwde

concepten. Deze concepten worden gebruikt in verschillende

onderwerpen van de handleiding.

4.1 Venturibuizen

De venturibuizen zĳn de kleine buizen die aan de ingang van de

branders bevestigd zĳn. Aan de zĳkant van de venturibuizen is er

een opening voorzien. Deze is zichtbaar op de hoofdbranders en

op de zĳ brander:

www.barbecook.com

19

Op weg naar de branders passeert het gas door de

venturibuizen. Via de openingen in de zĳkanten wordt het gas

gemengd met lucht, en dus ook met zuurstof. Dit is nodig

voor een goede ontbranding in de branders: alleen een correct

gas-zuurstofmengsel zal goed ontbranden en mooie vlammen

opleveren.

4.2 Branderkappen

De branderkappen zijn de kappen die gemonteerd worden

boven de branders van het toestel. Ze beschermen de branders

tegen druipend vet. De openingen aan de zijkanten van de

kappen verdelen de warmte over het rooster, zodat het veel

sneller en gelijkmatiger opgewarmd wordt.

4.3 Email

Sommige delen van het toestel zĳn bekleed met een laag

gesmolten glas, zogenaamd email. Dit email beschermt het

onderliggende metaal tegen corrosie. Email is een kwaliteitsvol

materiaal: het is bestand tegen roest, het verzwakt niet onder

invloed van hoge temperaturen en het is zeer eenvoudig te

onderhouden.

Omdat het email minder ﬂexibel is dan het metaal

waarop het is aangebracht, kunnen stukjes email

loskomen wanneer u het toestel niet correct gebruikt.

Om problemen te vermĳden, dient u voorzichtig te zĳn

wanneer u geëmailleerde onderdelen monteert en dient u

het email altĳd te onderhouden zoals beschreven in deze

handleiding.

4.4 Opﬂakkeringen

Opﬂakkeringen zĳn vlammen die plots uit de kuip springen

tĳdens het grillen. Ze worden meestal veroorzaakt door druipend

vet of druipende marinade.

5 HET TOESTEL MONTEREN

5.1 Veiligheidsinstructies

• Breng geen wĳzigingen aan het toestel aan wanneer u deze

in elkaar zet. Onderdelen die door de fabrikant werden

voorgemonteerd en/of afgedicht, mogen niet worden

gewĳzigd, want dit is zeer gevaarlĳk.

• Volg de montage-instructies altĳd zorgvuldig.

• De gebruiker is verantwoordelĳk voor de correcte montage

van het toestel. Schade veroorzaakt door een foutieve

montage wordt niet gedekt door de garantie.

5.2 Het toestel monteren

U hebt een kruisschroevendraaier, een platte schroevendraaier

en een AA-batterĳ (elektrische ontsteker) nodig. Er zĳn geen

batterĳen bĳ het toestel geleverd.

1. Plaats het toestel op een een en schone ondergrond.

2. Monteer het toestel zoals aangegeven in de

montagetekeningen. U vindt deze in het tweede deel van

deze handleiding, na de explosietekening van uw toestel

Wees voorzichtig bĳ het monteren van emailonderdelen.

Het gereedschap en de schroeven kunnen het email

beschadigen. Gebruik de bĳgeleverde vezelringen om het

email rond de schroeven te beschermen.

Het is mogelĳk dat de blisterverpakkingen meer

schroeven dan nodig bevatten, en dat er dus schroeven

overblĳven na de montage.

Het pakket omvat een noodkit met reserveonderdelen

(schroeven, bouten, vezelringen enz.) die u kunt

gebruiken als u een onderdeel verloren bent of

stukgemaakt hebt.

6 HET TOESTEL VAN GAS VOORZIEN

6.1 Welke gasﬂes, slang en regelaar?

Om het toestel van gas te kunnen voorzien, hebt u een gasﬂes,

een slang en een drukregelaar nodig. De slang en de regelaar

zĳn geleverd bĳ het toestel. De gasﬂes is niet bĳgeleverd.

Het type gasﬂes, slang en regelaar dat u nodig hebt, hangt af

van het land waar u woont.

Als u de slang of drukregelaar moet vervangen, moet u

materialen met dezelfde eigenschappen kopen als deze

die bĳ het toestel geleverd zĳn.

Neem uw drukregelaar mee als u een gasﬂes gaat kopen.

Niet alle drukregelaars passen op alle gasﬂessen.

6.2 Veiligheidsinstructies

• Sluit de gasﬂes nooit rechtstreeks aan op het toestel.

Monteer altĳd eerst een drukregelaar op de gasﬂes.

• Pas voorgemonteerde of verzegelde onderdelen van de

gasﬂes, slang of drukregelaar nooit aan.

• Zorg voor een zo kort mogelĳke slang (maximaal 1,5 m) om

te verhinderen dat deze over de grond sleept.

• Vervorm of plooi de gasslang nooit. Controleer of de

slang niet gespannen staat of gedraaid is. Laat de slang

nooit onderdelen raken die heet kunnen worden.

• De slang moet vervangen worden indien ze beschadigd

is of barsten vertoont, wanneer de nationale

voorschriften dit vereisen of volgens haar geldigheid.

• Zet de gasﬂes altĳd rechtop.

• Open nooit de gastoevoer

• Telkens wanneer u wĳzigingen aanbrengt aan de

gasverbindingen, moet u controleren of er gaslekken zĳn.

Zie “7 Controleren op gaslekken”.

CH

AT

Land

Gasﬂes, slang en

regelaar

Propaan, 50 mbar /

butaan, 50 mb ar

DE

Propaan, 50 mbar /

butaan, 50 mb ar

Propaan, 50 mbar /

butaan, 50 mb ar

www.barbecook.com

20

6.3 De slang aansluiten op het toestel

1. Zoek de gasbuis van het toestel.

2. Schroef de gasslang op de gasbuis (A) en draai deze aan

met twee moersleutels. Houd de buis vast met de ene

moersleutel en draai terwĳl de slang vast met de andere

moersleutel (D).

Het gebruik van een soepele slang geschikt voor butaan-

of propaangas is voorgeschreven. De slang mag niet

langer dan 1,50 m zĳn.

6.4 De slang en gasﬂes aansluiten op de

regelaar

U hebt een moersleutel van 17 mm en een Engelse sleutel nodig.

1. Schroef de slang op de drukregelaar en draai deze vast met

een moersleutel van 17 mm (A).

2. Schroef de regelaar rechtsom op de gasﬂes en draai deze

vast met een Engelse sleutel (B).

Gebruik enkel drukregelaars die aan de EN 16129

voldoen.

6.5 De gasﬂes vervangen

1. Draai de gastoever dicht en zet alle regelknoppen op OFF.

2. Koppel de lege gasﬂes los en sluit de volle gasﬂes aan.

3. Controleer de gasﬂes, de slang en alle gasverbindingen op

lekken. Zie “7 Controleren op gaslekken”.

Opgelet, bĳ het wisselen van de gasﬂes, moet dit altĳd uit

de buurt van elke ontstekingsbron uitgevoerd worden.

7 CONTROLEREN OP GASLEKKEN

7.1 Waarom controleren op gaslekken?

Propaan en butaan zĳn zwaarder dan lucht. Dit betekent dat

deze gassen niet wegdrĳven als ze uit het toestel lekken. Met

name op windstille dagen kan het gas zich in geval van een

gaslek gaan opstapelen in en rond het toestel, en vervolgens

ontsteken en ontploen.

7.2 Wanneer controleren op gaslekken?

• Voor het eerste gebruik of na een lange periode van

ongebruik.

Controleer of er geen gaslekken zĳn als het toestel

gemonteerd werd door de leverancier.

• Telkens wanneer u een gasonderdeel vervangt.

• Minstens één keer per jaar, bĳ voorkeur aan het begin van

het seizoen.

7.3 Veiligheidsinstructies

• Plaats het toestel buitenshuis op een goed geventileerde

plaats. Zorg ervoor dat er geen vlammen of warmtebronnen

in de buurt van het toestel zĳn.

• Gebruik nooit een aansteker of lucifer om te controleren op

gaslekken.

• Rook niet en ontsteek de branders niet wanneer u

controleert op gaslekken.

7.4 Welke materialen heb ik nodig?

Om te controleren of er gaslekken zĳn, hebt u het volgende

nodig:

• Een testvloeistof. U kunt hiervoor een kant-en-klare lekspray

of een mengsel van water (50%) en afwasmiddel (50%)

gebruiken.

• Het lektestgereedschap dat geleverd is bĳ het toestel. U

gebruikt dit gereedschap om de testvloeistof op te zuigen

en aan te brengen op de gasonderdelen of gasverbindingen

die u wilt controleren.

A

B

A

B

La pagina si sta caricando...

Barbecook Siesta 310 Black Edition Manuale utente

Barbecook Siesta 310 Black Edition Manuale utente

in altre lingue

Documenti correlati

Altri documenti