Aqara Cube T1 Pro Manuale utente

128g

80g

Cube T1 Pro User Manual

Würfel T1 Pro Benutzerhandbuch

Cube T1 Pro--Manuel d'utilisation

Cubo T1 Pro Manual de usuario

Cube T1 Pro Manuale d'uso

Куб T1 Pro Руководство пользователя

큐브 T1 Pro 사용자�매뉴얼

魔方控制器T1 Pro用戶手冊

. 01

. 17

. 31

. 46

. 60

. 74

. 87

. 95

*This product requires an Aqara Zigbee hub. Some functions require

specific hubs. For details, please see: www.aqara.com/support.

Aqara Cube T1 Pro is a new wireless controller, which

supports two modes: Action Mode and Scene Mode. The

action mode supports six modes: flip90°, flip 180°, tap

twice, push, shake and rotate. The scene mode supports

six states (face 1 ~ 6/any side up) and various action

control modes such as rotate, pick up and hold, and

shake when face 1-6 up. “Triggered aer one-minute

inactivity”is supported in both modes. It can be placed

on any surface, bound with the hub and work with other

smart devices to perform various smart automations.

Product Introduction

01

Quick Setup

Add Device

1. Download the Aqara Home app.

Search for "Aqara Home" in the Apple App Store, Google

Play,Xiaomi GetApps, Huawei App Gallery,or scan the

following QR code to download the Aqara Homeapp:

02

Reset button

Indicator light

Long press for 5 s: Reset/binding

Click: Eﬀective communication distance

test/device searching

Five clicks: Device mode switching

* If the device fails to be added, please move the device close to the hub

and try again.

* Quickly press the reset button once, or pick up the Cube and shake it

with force. If the hub gives a prompt sound, it indicates that the device

can communicate eﬀectively with the hub.

* Diﬀerent hubs give the prompt of successful connection in diﬀerent

ways. Please refer to the introduction of the hub.

2. An Aqara Zigbee hub is required. Please make sure

you have an Aqara Zigbee hub installed and added to

the Aqara Home app.

3. Open the battery cover with the ejector tool.

4. Open the app, click "+" in the upper right corner of the

home page to enter the "Add Accessory" page, select

"Cube T1 Pro", select the hub to be connected,

operate according to the instructions on the app, and

then long press the device reset buttonfor 5 seconds,

waiting for the hub to indicate that the connection is

successful.

5. For moreinformation, please visit: aqara.com/support.

03

* To ensure stable wireless communication, please avoid installation on

metal surfaces.

Inspection and Installation

Eﬀective distance test: Pick up the Cube and shake it or

press the reset button. If the hub gives a prompt sound,

it indicates that the device can communicate eﬀectively

with the hub.

Mode Switching

Open the Aqara Home app, enter the device page, and

click "..." in the upper right corner, enter the device

setting page, click "More Settings", click "Mode

Switching", and select the desired mode.

Battery Replacement

Open the battery cover of Cube T1 Pro with the ejector

tool, take out the battery, replace it with a new CR2450

battery (note that the positive electrode of the battery is

upward), and then close the battery cover again.

04

Instructions

05

+

Action mode

Flip 90°: Pick up the Cube

and flip by 90°

90°

Flip 180°: Pick up the Cube

and flip by 180°

180°

Triggered aer one-minute inactivity: The Cube is moved

aer stands still for one minute

06

Shake: Pick up the Cube and

shake it back and forth quickly

twice

Tap: Pick up the Cube and

tap it twice

Rotate: Rotate the Cube

on a surface

Push: Push the Cube on a

surface

07

Scene Mode

*HomeKit only supports this

function.

Pick up and hold: Pick

up the cube and hold

still

Pick up and hold: Pick up the

cube and hold still

Shake: Pick up the Cube and

shake it back and forth quickly

twice

Side X up *: Flip the Cube

to the X (1 ~ 6/any) side up

X

08

Specifications

Product Model: CTP-R01

Dimensions: 45×45×45mm (1.77×1.77×1.77in.)

Net Weight: 76 g

Battery: CR2450 (Replaceable)

Wireless Protocol: Zigbee

Operating Temperature: -10°C ~ 50°C (14°F ~ 122°F)

Operating Humidity: ≤ 95% RH, no condensation

Zigbee Operation Frequency: 2405- 2475MHz

Zigbee Maximum Output Power ≤ 13 dBm

Online Customer Service: www.aqara.com/support

Manufacturer: Lumi United Technology Co., Ltd.

Address: Room 801-804, Building 1, Chongwen Park,

Nanshan iPark, No. 3370, Liuxian Avenue, Fuguang

Community, Taoyuan Residential District, Nanshan

District, Shenzhen, China

09

Under normal use of condition, this equipment should

be kept a separation distance of at least 0 mm between

the antenna and the body of the user.

Warnings

1. This product is not a toy, please keep children away

from this product.

2. This product is designed for indoor use only. Do NOT

use in humid environments or outdoors.

3. Beware of moisture, do NOT spill water or other

liquids onto the product.

4. Do not place this product near a heat source.

5. Do not attempt to repair the product by yourself. All

repairs should be performed by authorized personnel.

6. This product is designed only for improving the

convenience of household life, and for status

notifications. If the user violates the product

instructions and this warning, the manufacturer is not

responsible for any risks and property losses caused

thereby.

Hereby, [Lumi United Technology Co., Ltd]

EU Declaration of Conformity

declares that the radio equipment type [Cube T1

Pro,CTP-R01] is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is

available at the following internet address:

https://www.aqara.com/DoC/

WEEE Disposal and Recycling Information

All products bearing this symbol are waste

electrical and electronic equipment (WEEE as in

directive 2012/19/EU) which should not be mixed with

UK Declaration of Conformity

Hereby, [Lumi United Technology Co., Ltd]

declares that the radio equipment type [Cube T1

Pro,CTP-R01] is in compliance with Directive 2017 (SI 2017

No.1206, as amended by SI 2019 No. 696).

The full text of the UK declaration of conformity is

available at the following internet address:

http://www.aqara.com/DoC/

10

CAUTION

1. Risk of explosion if the battery is replaced by an

incorrect type.

11

Symbol on the product or on its packaging

indicates that this product may not be

treated as household waste. Instead it shall

be handed over to the applicable collection

point for the recycling of electrical and electronic equipment.

unsorted household waste. Instead, you should protect

human health and the environment by handing over your

waste equipment to a designated collection point for the

recycling of waste electrical and electronic equipment,

appointed by the government or local authorities. Correct

disposal and recycling will help prevent potential

negative consequences to the environment and human

health. Please contact the installer or local authorities for

more information about the location as well as terms and

conditions of such collection points.

2. Dispose of used batteries according to the instructions.

3. Do not ingest battery, Chemical Burn Hazard.

4. This product contains a coin / button cell battery. If the

coin / button cell battery is swallowed, it can cause

severe internal burns in just 2 hours and can lead to

death.

5. Keep new and used batteries away from children.

6. If the battery compartment does not close securely,

stop using the product and keep it away from children.

7. If you think batteries might have been swallowed or

placed inside any part of the body, seek immediate

medical attention.

8. Disposal of a battery into fire or a hot oven, or

mechanically crushing or cutting of a battery, that can

result in an explosion.

9. Leaving a battery in an extremely high temperature

surrounding environment that can result in an

explosion or the leakage of flammable liquid or gas

10. A battery subjected to extremely low air pressure that

may result in an explosion or the leakage of

flammable liquid or gas.

12

FCC ID:2AKIT-CTP-R01

Federal Communications Commission (FCC) compliance

statement:

1.This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received,

including interference that may cause undesired

operation.

2.Changes or modifications not expressly approved by

the party responsible for compliance could void the

user's authority to operate the equipment.

Note: This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

13

interference to radio communications. However, there is

no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment oﬀ

and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and

receiver.

—Connect the equipment into an outlet on a circuit

diﬀerent from that to which the receiver is connected.

—Consult the dealer or an experienced radio/TV

technician for help.

The SAR limit of FCC is 1.6W/kg over 1 gram of tissue for

use against the body. The highest SAR value reported

under this standard during product certification when

properly worn on the body is 0.17W/kgThis device was

tested for typical body-worn operations with the edge of

the device kept 0mm from the body.

14

IC:22635-CTPR01

IC NOTICE TO CANADIAN USERS

This device contains licence-exempt transmitter(s)/re-

ceiver(s) that comply with Innovation, Science and

Economic Development Canada’s licence-exempt

RSS(s). Operation is subject to the following two

conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including

interference that may cause undesired operation of the

device.

This Class B digital apparatus complies with Canadian

ICES003.

This device complies with RSS247 of Industry Canada.

Operation is subject to the condition that this device

does not cause harmful interference.

The SAR limit of IC is 1.6W/kg over 1 gram of tissue for

use against the body. The highest SAR value reported

under this standard during product certification when

properly worn on the body is 0.17W/kgThis device was

15

*Please read this manual carefully and keep it in a safe place.

*If necessary, the contents of this manual will be modified or adjusted

without special notice.

tested for typical body-worn operations with the edge of

the device kept 0mm from the body.

Scan to get the Zigbee Install Code on the last page of

the manual.

16

La pagina sta caricando ...

Aqara Cube T1 Pro Manuale utente

Aqara Cube T1 Pro Manuale utente

in altre lingue

Documenti correlati

Altri documenti