Philips 50PFA4500S/98 Manuale utente
- Categoria
- TV LCD
- Tipo
- Manuale utente
Questo manuale è adatto anche per
Register your product and get support at
www.philips.com/welcome
EN User manual
40PFA4500
50PFA4500
55PFA4500
1EN
English
Contents
1 Caution 2
2 Important 3
Safety 3
3 Your TV 5
Control Panel 5
Remote Control 5
Remote control usage 6
4 Use your TV 7
Switch TV on or off 7
Switch channels 7
Watch connected devices 8
Adjust TV volume 8
5 Other uses of the TV 9
Accessing the TV menu 9
Change the picture and sound setup 9
Settings 10
Use timer 11
Adjusting VGA Setup 12
Playing media from USB devices 12
Updating the TV software 13
Restoring the factory setup 13
6 Setting up channels 15
Setting up channels automatically 15
Setting channels manually 15
Renaming channels 15
7 TV connections 16
Rear connections 16
Side connections 17
Connecting to a computer 18
Use Philips EasyLink 19
8 Product information 20
Display resolutions 20
Multimedia 20
Audio Output Power 20
Inherent resolution 20
Tuner / Reception / Transmission 20
Remote Control 20
Power Supply 20
Supported TV mounts 21
9 Troubleshooting 22
General issues 22
Channel issues 22
Picture issues 22
Sound issues 23
HDMI connection issues 23
Computer connection issues 23
Contact us 23
10
Warranty 25
2 EN
Mains fuse (/56)
This TV is tted with an approved moulded
plug. Should it become necessary to replace
the mains fuse, this must be replaced with a
fuse of the same value as indicated on the plug
(example 10A).
1 Remove fuse cover and fuse.
2 The replacement fuse must comply with BS
1362 and have the ASTA approval mark. If
the fuse is lost, contact your dealer in order
to verify the correct type.
3 Ret the fuse cover.
Copyright
®
Kensington and Micro Saver are registered US
trademarks of ACCO World corporation with
issued registrations and pending applications in
other countries throughout the world.
HDMI, the HDMI logo and High-Denition
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC in
the United States and other countries.
All other registered and unregistered trademarks
are the property of their respective owners.
This product is manufactured under license from
Dolby Laboratories. Dolby and the double-D
symbol are registered trademarks of Dolby
Laboratories.
MHL
MHL, Mobile High-Denition Link and the MHL
Logo are trademarks or registered trademarks
of the MHL, LLC.
1 Caution
2015© TP Vision Europe B.V. All rights
reserved. Specifcations are subject to change
without notice. Trademarks are the property
of Koninklijke Philips N.V or their respective
owners. TP Vision Europe B.V. reserves the right
to change products at any time without being
obliged to adjust earlier supplies accordingly.
The material in this manual is believed adequate
for the intended use of the system. If the
product, or its individual modules or procedures,
are used for purposes other than those specied
herein, conrmation of their validity and
suitability must be obtained. TP Vision Europe
B.V. warrants that the material itself does not
infringe any United States patents. No further
warranty is expressed or implied.
TP Vision Europe B.V. cannot be held responsible
neither for any errors in the content of this
document nor for any problems as a result of
the content in this document. Errors reported
to Philips will be adapted and published on the
Philips support website as soon as possible.
Terms of warranty
• Risk of injury, damage to TV or void of
warranty! Do not attempt to repair the TV
yourself.
• Use the TV and accessories only as
intended by the manufacturer.
• The caution sign printed on the back of the
TV indicates risk of electric shock. Never
remove the TV cover. Always contact Philips
Customer Support for service or repairs.
• Any operation expressly prohibited in
this manual, or any adjustments and
assembly procedures not recommended
or authorised in this manual shall void the
warranty.
Pixel characteristics
This LCD/LED product has a high number of
color pixels. Although it has effective pixels of
99.999% or more, black dots or bright points of
light (red, green or blue) may appear constantly
on the screen. This is a structural property of the
display (within common industry standards) and
is not a malfunction.
3EN
English
Risk of injury or damage to the TV!
• Two people are required to lift and carry a
TV that weighs more than 25 kg or 55 lbs.
• When stand mounting the TV, use only the
supplied stand. Secure the stand to the TV
tightly. Place the TV on a at, level surface
that can support the combined weight of
the TV and the stand.
• When wall mounting the TV, use only a wall
mount that can support the weight of the
TV. Secure the wall mount to a wall that
can support the combined weight of the
TV and wall mount. TP Vision Europe B.V.
bears no responsibility for improper wall
mounting that results in accident, injury or
damage.
• If you need to store the TV, disassemble the
stand from the TV. Never lay the TV on its
back with the stand installed.
• Before you connect the TV to the power
outlet, ensure that the power voltage
matches the value printed on the back of
the TV. Never connect the TV to the power
outlet if the voltage is different.
• Parts of this product may be made of
glass. Handle with care to avoid injury and
damage.
Risk of injury to children!
Follow these precautions to prevent the TV
from toppling over and causing injury to children:
• Never place the TV on a surface covered
by a cloth or other material that can be
pulled away.
• Ensure that no part of the TV hangs over
the edge of the surface.
• Never place the TV on tall furniture (such
as a bookcase) without anchoring both the
furniture and TV to the wall or a suitable
support.
• Educate children about the dangers of
climbing on furniture to reach the TV.
Risk of swallowing batteries!
• The product/remote control may contain a
coin-type battery, which can be swallowed.
Keep the battery out of reach of children
at all times!
2 Important
Read and understand all instructions before you
use your TV. If damage is caused by failure to
follow instructions, the warranty does not apply.
Safety
Risk of electric shock or re!
• Never expose the TV to rain or water.
Never place liquid containers, such as
vases, near the TV. If liquids are spilt on or
into the TV, disconnect the TV from the
power outlet immediately. Contact Philips
Consumer Care to have the TV checked
before use.
• Never place the TV, remote control or
batteries near naked ames or other heat
sources, including direct sunlight.
To prevent the spread of re, keep candles
or other ames away from the TV, remote
control and batteries at all times.
• Never insert objects into the ventilation
slots or other openings on the TV.
• When the TV is swivelled ensure that no
strain is exerted on the power cord. Strain
on the power cord can loosen connections
and cause arcing.
• To disconnect the TV from the mains
power, the power plug of the TV must be
disconnected. When disconnecting the
power, always pull the power plug, never
the cord. Ensure that you have full access
to the power plug, power cord and outlet
socket at all times.
Risk of short circuit or re!
• Never expose the remote control or
batteries to rain, water or excessive heat.
• Avoid force coming onto power plugs.
Loose power plugs can cause arcing or re.
4 EN
of the image. Avoid using this mode for
extended periods of time.
•
Displaying stationary images from video
games or computers for an extended
period of time may result in partial after-
images and the appearance of ghost images
caused by screen burn. Reduce screen
brightness and contrast accordingly when
using the TV in this way.
Ghost images, partial after-images, and other
traces that appear on the TV screen as a result
of the above are not covered by the warranty.
Recycling
Your product is designed and manufactured with
high quality materials and components, which
can be recycled and reused.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC. Please inform yourself about the local
separate collection system for electrical and
electronic products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste.
Correct disposal of your old product helps to
prevent potential negative consequences for the
environment and human health.
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot
be disposed of with normal household waste.
Please inform yourself about the local rules on
separate collection of batteries because correct
disposal helps to prevent negative consequences
for the environment and human health.
Risk of overheating!
• Never install the TV in a conned space.
Always leave a space of at least 4 inches or
10 cm around the TV for ventilation. Ensure
curtains or other objects never cover the
ventilation slots on the TV.
Risk of injury, re or power cord damage!
• Never place the TV or any objects on the
power cord.
• Disconnect the TV from the power outlet
and antenna before lightning storms. During
lightning storms, never touch any part of
the TV, power cord or antenna cable.
Risk of hearing damage!
• Avoid using earphones or headphones at high
volumes or for prolonged periods of time.
Low temperatures
• If the TV is transported in temperatures
below 5°C or 41°F, unpack the TV and wait
until the TV temperature matches room
temperature before connecting the TV to
the power outlet.
Screen care
• Avoid stationary images as much as
possible. Stationary images are images that
remain on-screen for extended periods
of time. Example: on-screen menus, black
bars and time displays. If you must use
stationary images, reduce screen contrast
and brightness to avoid screen damage.
• Unplug the TV before cleaning.
• Clean the TV and frame with a soft, damp
cloth. Never use substances such as alcohol,
chemicals or household cleaners on the TV.
• Risk of damage to the TV screen! Never
touch, push, rub or strike the screen with
any object.
• To avoid deformations and color fading,
wipe off water drops as soon as possible.
Note
Stationary images may result in permanent
damage to the TV screen.
•
Do not display stationary images on the
LCD screen for more than two hours as
this may result in ghost images. To prevent
this, reduce screen brightness and contrast.
•
Viewing programs in the 4:3 format for
extended periods of time may leave
different traces on the left and right edges
of the screen as well as along the borders
5EN
English
Remote Control
SETUP
SOURCES EXIT
LISTBACK
FORMAT
OPTIONS
INFO
1
2
3
5
6
7
8
9
10
11
12
4
13
14
15
16
17
18
19
21
22
20
a (Standby)
Switch the TV on or to standby.
b Play buttons
Control video, music or text.
c FORMAT
Change picture format.
d (Home)
Access or exit from the main menu and
return to the previous menu.
3 Your TV
Congratulations on your purchase, and welcome
to Philips! To fully benet from the support that
Philips offers, register your TV at www.philips.
com/welcome.
Control Panel
1
2
3
4
5
a Volume-: Without the key menu, the
volume-down function is available.
b Volume+: Without the key menu, the
volume-up function is available.
c Channel+: When there is no keyboard
menu, switch to the next channel function;
when the keyboard menu appears, move
up and down the appropriate options.
d Channel-: When there is no keyboard
menu, switch to the prior channel function;
when the keyboard menu appears, move
up and down the appropriate options.
e Signal source/OK: In standby, the signal
source/OK key is used as a power key.
Press this key to boot.
After booting, the signal source/OK key
is used to open the keyboard menu
functions. When the keyboard menu is
open, the signal source/OK key is used as a
conrmation key.
Note: The signal source/OK key has no
function in USB mode
6 EN
Remote control usage
When you use the remote control, hold it close
to the TV and point it at the remote control
sensor. Make sure that the line-of-sight between
the remote control and TV is not blocked by
furniture, walls or other objects.
e
EXIT
Switches to TV.
f OPTIONS
Access options for channels in the TV
mode.
g (Navigation buttons)
Navigate through menus and select items.
h OK
Conrm an entry or selection.
i LIST
Access or exit from the TV channel list.
j CH +/- (Channel +/-)
Changes channels; scrolls up/down through
the options in USB mode.
k (Mute)
Mute or restore audio.
l 0-9 (Numeric buttons)
Select channel.
m TEXT
Enable or disable teletext.
n SUBTITLE
Selects subtitles.
o +/- (Volume)
Adjust volume.
p (Back)
Return to the previous menu or exit from a
certain function , and switch to the previous
channel or signal source.
q INFO
Display information about current activity.
r Color buttons
Select tasks or options.
s SOURCE
Select connected devices
t
SETUP
Accesses TV setup menu.
u
TV GUIDE
Accesses or exits the TV channels list.
v
Red
The red key has no function
7EN
English
Switch channels
1
2
3
4
5
• Press CH +/- on the remote control or the
lower right part of the TV.
• Enter a channel number using the numeric
buttons on the remote control.
• Press on the remote control to switch
and return to the previous channel.
View installed channel
You can view all available channels on the
channel list.
LIST
1 Press LIST.
» The channel list appears.
2 Press to select a channel and browse
the channel list.
3 Press OK to watch the selected channel.
4 Press to switch to and resume the last
watched channel.
4 Use your TV
This section helps you perform basic TV
operations.
Switch TV on or off
Standby indicator
To switch on
• Plug in the power plug.
» If the standby indicator is red, press
(Standby-On) on the remote control.
To switch to standby
• Press (Standby-On) on the remote
control.
» The standby indicator switches to red.
Tip
• Though your TV consumes very little power when in
standby mode, energy continues to be consumed. When
not in use for an extended period of time, disconnect the
TV power cable from the power outlet.
8 EN
Adjust TV volume
1
2
3
4
5
To increase or decrease volume
• Press VOL +/-at the lower right part of
the TV or the Volume Control+/- on the
remote control.
To mute or unmute sound
• Press (Mute).
• Press again to restore the sound.
Watch connected devices
Note
• Switch on the device before selecting it as an external
signal source.
Use the Source button
SOURCES
1 Press SOURCE.
» The source list appears.
2 Press
to select a device.
3 Press OK to select.
» The TV switches to the selected device.
9EN
English
2 Press Selecting/adjusting setup:
• [Smart picture]:
• [Standard]: Normal picture
setup. Recommended for home
entertainment use.
• [Eco]: Decreases the intensity of
the backlight to reduce power
consumption.
• [Vivid]: Increases the contrast and
sharpness of the picture.
• [Movie]: Applies setup for watching
movies, which works best in a theater
environment.
• [Personal]: Users can dene custom
setup here.
• [Brightness]: Adjusts the intensity and
detail of dark areas (adjustments made can
only be saved in personal setup).
• [Video contrast]: Adjusts the intensity
and detail of bright areas, with dark areas
remaining unchanged (adjustments made
can only be saved in personal setup).
• [Color]: Adjusts the color saturation
(adjustments made can only be saved in
personal setup).
• [Tint]: Adjusts the level of green (this
option only appears when using the NTSC
standard).
• [Sharpness]: Adjusts the sharpness of the
image (adjustments made can only be
saved in personal setup).
• [Color Temperature]:
• [Cool]: Bluish white tint.
• [Normal]: White tint. Users can
personalize the white tint inPCmode.
• [Warm]: Reddish white tint.
• [Advanced control]:
• [Noise Reduction]: Filters and
eliminates signal noise within the image.
• [Backlight]: Adjusts the screen
brightness (when the backlight
brightness is set to a low value, a
momentary white icker may be visible
when turning on the unit. This is normal.
When [Dynamic Backlight] is turned on,
this function will be hidden).
• [Dynamic Contrast]: Sets the contrast
to maximum. (There are no advanced
contrast functions in PC mode.)
5 Other uses of
the TV
Accessing the TV menu
The menu can help you to set up channels,
change the picture and sound setup, and access
other functions.
1 Press (Home) .
» Display menu screen.
Watch TV Source
Setup
USB
2 Select [Setup].
3 Press Choose from the following
options:
• [Picture] / [Sound] / [TV] (available
only in TV mode) / [Settings] /
[Parental] / [VGA Setting] (available
only in PC mode) / [EasyLink].
4 Press OK to select.
5 Press (Home) to go back.
Change the picture and sound
setup
Change the picture and sound setup to suit your
preferences. You can either use the presets or
manually change the setup.
Adjusting the picture setup
1
Press
(Home), then select Setup to
enter the setup menu and select
[
Picture]
.
»
Displays the [Picture] menu.
.
10 EN
Settings
1 Press
(Home),
then select Setup
to enter the setup menu and select
[Settings]
.
»
Displays [Settings] menu.
2
Press Select and adjust the setup:
• [Menu language]: Changes the TV’s
language setup.
• [Picture Format]: The majority of
signals use 16:9, 4:3, Zoom 1 and
Zoom 2 formats; HDMI signal sources
use 16:9, 4:3, Point to Point, zoom
1 and zoom 2 formats; VGA signal
sources on PCs use 16:9, 4:3 and Point
to Point formats.
• [Menu Timeout]: Sets the duration for
which the menu is displayed.
• [Menu Transparency]: Sets the level of
transparency for the menu.
• [Blue Screen]: Sets the screen color for
when the TV is not receiving a signal
(when the TV signal is not functioning).
• [Auto Sleep]: Sets the duration for
which the TV remains idle before it
automatically enters standby mode.
(Not applicable in PC mode).
• [Sleep Timer]: (Sleep Timer): Sets the
duration before the TV automatically
enters standby mode. Options:
Off/10/20/30/60/90/180 minutes.
• [Power On Status]: Sets the TV’s status
when it is connected to an AC power
supply.
• [Freeze Switch]: Turns on or off the
option to freeze the picture when
changing channels.
• [TTX Language]: Sets the TTX
language (only available in TV mode).
• [Color System]: Sets the AV color
system. (Only displayed in AV mode)
• [HDMI]: Sets the HDMI mode. (Only
displayed in 480p/576p/720p/1080p
HDMI modes. PC mode is
recommended when connecting a PC.)
• [Reset]: Restores the default setup.
(Excluding password setup and channel
information)
• [Dynamic Backlight]: The contrast level
will change with the brightness of the
image.
Note
•
The options may vary for different signal sources.
Adjusting the sound setup
1 Press
(Home), then select Setup to
enter the setup menu and select
[Sound].
»
Displays [Sound] menu.
.
2 Press Select and adjust the setup:
• [Smart Sound]:
• [Standard]: Gives balanced,
outstanding sound performance
in the treble, mid and bass ranges.
• [Music]: Enhances treble and bass,
delivering bright, clear and pure
sound quality when listening to
piano or orchestral instrument
performances.
• [Movie]: Enhance sound quality
of movies to enjoy a cinema-like
effects at home.
• [Personal]: Provides user
customization functions in order
to optimize all sound effect
parameters and achieve the best
experience.
• [Balance]: Adjusts the balance of the
left and right speakers.
• [Bass]: Adjusts the bass level
(adjustments made can only be saved
in personal setup).
• [Treble]: Adjusts the treble level
(adjustments made can only be saved
in personal setup).
• [Virtual surround]: Turns virtual
surround sound on: Turn on or off.
• [SPDIF Mode]: Selects the SPDIF
output mode.
• [AVL]: Turns automatic volume
adjustment on.
11EN
English
Use timer
You can set the timer to switch the TV to
standby mode at a set time.
Tip
• Before using the timer, please set the sleep timer.
Setting the sleep timer
Tip
• You can turn the TV off earlier, or reset the sleep timer
before the TV switches off.
1
Press (Home), then select Setup to
enter the setup menu and select
[Settings].
2 Press to Select [Sleep Timer].
3 Press You can select a time for the
sleep timer to turn the TV off.
» The longest time that can be set for
the sleep timer is 180 minutes.
TV lock
By locking the TV remote control, you can
prohibit children from watching specic
programs or channels.
Setting or changing your password
1
Press
(Home)
,
then select Setup to
enter the setup menu and select
[Parental].
2 Use the number buttons on the remote
control to enter a password.
3 Select (Change Password) and follow the
instructions on screen.
Locking channels
1
Press (Home), then select Setup to
enter the setup menu and select
[Parental].
2 Enter the password and select [Channel
Lock].
Changing picture format
1 Press (Home), then select Setup to
enter the setup menu and select [Settings].
2 Press to select [Picture Format].
3 Select a picture format.
4 Press OK to conrm.
Summary of picture formats
Conguration of the picture setup listed below.
Notes
• Some picture setups may be unavailable due to
differences between picture signal formats.
[16:9]: Change the normal
ratio to widescreen format.
[4:3]: The normal format.
[Zoom 1]: Horizontal
scaling of the widescreen
picture format. When this
format is used, the two
edges of the picture frame
will be partly cut off.
[Zoom 2]: Set the normal
ratio to widescreen format.
(Only 16:9, 4:3, and Point
to Point are available in PC
mode).
[Point to Point]: Used for
HDMI connections on PCs.
Will display the PC's full
screen in order to achieve
the best display effect.
12 EN
Playing media from USB devices
If you have photos, music or video les stored
on a USB storage device, you can play the les
on your TV.
• Supported storage devices: USB (only
FAT or FAT 32 USB storage devices are
supported)
• Supported media le formats:
• Images: JPEG
• Audio: MP3
• Video: MPEG 2/MPEG 4, H.264
• Text les: TXT
Note
• TP Vision shall not be liable if a USB storage device is not
supported, or if the data in the device is damaged or lost.
Viewing pictures and playing audio,
text and video les
1 Tu r n on the TV.
2 Connect the USB storage device to the
USB port on the side of the TV.
3 Press (Home).
4 Select [USB] and press OK.
» The USB browser will open.
Viewing photos
1 In the USB browser, select [Photo] and
press OK.
2 Select a photo then press OK. The photo
will be enlarged to ll the screen.
• Press CH- or CH+ to see the previous
or next photo.
Starting slide shows
1 Select a photo or folder, then press OK.
The photo will be enlarged to ll the
screen.
» The slide show starts playing from the
selected photo.
3 Choose a channel. Press OK to lock or unlock
the channel.
4 Repeat this step to lock or unlock multiple
channels.
• [Channel Lock]: When channels are
locked:
• A four-digit password is required to
enter the channel search menu.
• You need to enter the four digit
password to watch locked channels.
• You need to enter the four digit
password to enter the parental menu.
• [Clear All]: This function will clear all the
locked channels and signal sources that you
have previously saved.
• The default password is “0000”.
Users may change or set the
password themselves.
Notes
• If you visit a locked channel, you will be prompted to
enter the password.
Adjusting VGA Setup
1 Press
(Home)
,
then select Setup to enter
the setup menu and select
[VGA setting].
» The [VGA setting] menu will be displayed.
2 Press Select and adjust the setup:
• [Auto adjust]: Automatically adjusts the TV
to synchronize its resolution with that of
the PC, so that programs are displayed in
full screen.
• [H.Position]: Adjusts the horizontal
position.
• [V.Position]: Adjusts the vertical position.
• [Phase]: Adjusts the phase frequency of the
VGA signal.
• [Clock]: Adjusts the clock frequency of the
VGA signal.
Tip
• The VGA menu is only visible when connected to a PC.
13EN
English
• [Size]: Display size of video (no option
available).
• [Close]: Close menu.
Viewing documents
1 In the USB browser, select [Text], then
press OK.
2 Press OK to read the text le.
3 Use the following buttons to control text
le playback:
• or : Play or pause
• : Search forward or backward.
4 Press INFO button to display text size.
Removing USB storage devices
Note
• In order to avoid damaging the USB storage device,
please follow the steps below.
1 Press (Back) repeatedly to exit the USB
browser.
2 Wait for approximately ve minutes before
removing the USB storage device.
Updating the TV software
Philips constantly strives to improve its products,
so we recommend that you update your
TV software whenever an update becomes
available. Please visit the website at
www.philips.com/support to nd out whether
there are updates available.
Restoring the factory setup
You can restore your TV’s default picture and
sound setup. Saved channel setup will not be
affected.
2 Press the following buttons to control
photo playback:
• or : Play or pause
• CH- or CH+: See the last photo or the
next photo.
3 Press the INFO button for graphic display
of basic information
Listening to music
1 In the USB browser, select [Music] and
press OK.
2 Select a song or album, then press OK to
start playing.
3 Use the following buttons to control music:
• or : Play or pause
• : Adjust Smart sound
Watching video
1 In the USB browser, select [Movie], then
press OK.
2 Press OK to play the video.
3 Use the following buttons to control the
movie:
• or : Play or pause
• : Search forward or backward.
Change video setting
When playing a video, press INFO for the
setting menu, press , then choose
the relevant setting and make adjustments
accordingly:
• [Smart picture]: Setting the playbaqck
mode of the screen.
• [Smart sound]: Setting the playback
mode of the sound.
• [Sound track]: Adjust sound track
(adjustments cannot be made without
sound track).
• [Subtitles]: Adjust subtitle (adjustments
cannot be made without subtitles).
• [Resolution]: Display video resolution
(no option available).
14 EN
1 Press
(Home)
and select Setup to enter the
setup menu
.
2 Press to Select [Settings] > [Reset].
3 Select [Conrm] and press OK. If you want to
cancel, please select [Cancel] and press OK.
15EN
English
Deleting channels
1 Press
(Home)
and select Setup to enter
the setup menu.
2 Press Select [TV] > [Channels]
> [Channel Edit].
» The [Channel Edit] menu will be
displayed.
3 Press Select the channel you wish to
delete, then press the red button.
Skipping channels
1
Press
(Home)
and select Setup to enter
the setup menu.
2 Press Select [TV] > [Channels]
> [Channel Edit].
» The [Channel Edit] menu will be
displayed.
3 Press Select the channel you wish to
skip, then press the blue button.
Renaming channels
You can rename channels. Selecting a channel
will display its name.
1 Press
(Home)
and select Setup to enter
the setup menu.
2 Press Select [TV] > [Channels]
> [Channel Edit].
» The [Channel Edit] menu will be
displayed.
3 Press to select the channel to be
renamed, then press the green button.
4 Press to select characters.
5 Press the green button to nish renaming
the channel.
Tip
• Channel names can include a maximum of 6 characters.
6 Setting up
channels
This chapter explains how to recongure and
ne-tune channels.
Setting up channels
automatically
Automatically nds and saves channels.
1 Press
(Home)
and select Setup to enter
the setup menu.
2 Press Select [TV] > [Channels]
> [Channel Scan].
3 Press OK.
» The TV will automatically start
searching for channels.
Setting channels manually
You can manually nd and save analog TV
channels.
Finding and saving new TV channels
1 Press
(Home)
and select Setup to enter
the setup menu.
2 Press to Select [TV] >
[Channels] > [Manual Search].
» Show [Manual Search] menu.
3 Select (Search) and use the number keys to
enter the frequency.
4 Select (Search) and press the key to
begin channel search.
5 Press (Home) Exit.
16 EN
VideoL R
Y / AV Pb Pr LR
c Antenna/ cable TV
Input for an antenna, cable or satellite signal.
ANTENNA
d PC inputs (VGA and audio)
VGA AUDIO
e SPDIF
7 TV connections
This chapter explains how to connect devices with
different interfaces.
Note
• You can use different connection types to connect
devices to the TV.
Rear connections
a Component signal input
Audio and video input from DVD players,
game consoles and other analog or digital
devices
Y / AV Pb Pr LR
b AV input
17EN
English
Note
•
MHL is unable to support 100% of all mobile devices.
b USB
Data input from a USB storage device.
Transmit sound to digital audio signal, then
connected audio device can play digital
audio sound.
SPDIF
f Headphones
q
Stereo sound output for headphones.
Note
• The TV speakers will automatically be muted when
headphones are plugged in.
•
The earphone jack is only used as a low-power audio
output. Please do not connect high-power devices that are
AC-powered (e.g., AC-powered, high-power speakers, etc.).
Side connections
a HDMI 1 (ARC) /HDMI 2 (MHL) /HDMI 3
Digital audio and video input from Blu-ray
players and other high denition devices
18 EN
AUDIO
• HDMI cable and HDMI-DVI adapter
AUDIO
• VGA cable
VGA
VGA
AUDIO
Connecting to a computer
Before connecting the computer to the TV:
• Set the computer screen refresh rate to 60Hz.
• Select a supported resolution on the computer.
Connect to the computer using one of the following
connections:
Notes
• A separate audio cable is required when connecting with
DVI or VGA.
• HDMI cable
1
Set the computer display resolution to
480p/576p/720p/1080p
2
Press
(Home) and select Setup to enter
the setup menu
.
3 Press to select [
Settings] >
(HDMIMode) and set the HDMI Screen Mode
to PC or video.
4
Adjust picture format for the best display
effect.
•
Press
(Home)
and select Setup to
enter the setup menu.
•
Press Select [Settings
]
>
[Picture Format].
•
Select a picture format.
•
Press OK to confirm
.
• DVI-HDMI cable
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
Philips 50PFA4500S/98 Manuale utente
- Categoria
- TV LCD
- Tipo
- Manuale utente
- Questo manuale è adatto anche per