Philips Model Vehicle 40PFL9606 Manuale utente

!!!"#$%&%#'"()*+!,&()*,

-,.%'/,012)301#0)43(/15641.,/1'3##)0 /15/ 78881',0 %,'19*50/1:;<1=>

?@AB:7C8C

?DAB:7C8C

E8AB:7C8C

F@AB:7C8C

ECAB:7D8C

G',01*5635&

Downloaded From TV-Manual.com Manuals

1

1.1

1.2

1.3

1.4

1.5

2

2.1

2.2

2.3

2.4

2.5

2.6

2.7

3

3.1

3.2

3.3

3.4

3.5

3.6

4

4.1

4.2

4.3

4.4

4.5

4.6

4.7

4.8

5

5.1

5.2

5.3

5.4

5.5

5.6

5.7

6

6.1

6.2

6.3

6.4

6.5

6.6

6.7

7

7.1

7.2

7.3

7.4

7.5

7.6

7.7

7.8

Contents

Getting started 3

TV tour 3

Setting up 7

Keys on the TV 10

Register your TV 11

Help and support 12

Basics 13

Remote control 13

Menus 16

Watch TV 18

3D 22

Watch satellite 24

Connected devices 27

Subtitles, timers and locks 28

Smart TV 29

Net TV 29

Interactive TV 32

Videos, photos and music 33

Pause TV and recording 35

Games 37

Text 38

Setup 40

Picture and sound 40

Ambilight 42

Channels 44

Satellite channels 46

Network 48

Devices 50

Universal access 51

Software 52

Connections 53

First connections 53

Cables and connections 54

Connect devices 56

Connect more devices 64

Network 69

SD card 70

Common interface CAM 71

Troubleshooting 72

Contact information 72

TV and remote control 73

TV channels 74

Picture and sound 75

Devices 76

Videos, photos and music 77

Network 78

Specifications 79

Software 79

Environmental 80

Power and reception 82

Display and sound 83

Display resolutions 84

Multimedia 85

Connectivity 86

Dimensions and weights 87

Index 88

2 Contents

Downloaded From TV-Manual.com Manuals

1

1.1

Getting started

TV tour

Smart TV

Connect your Smart TV to the Internet and you can rent a

movie from your home, browse the Net TV apps, watch

programmes you missed or check the TV guide. View your

photos and videos from your PC, tablet PC or phone.

Connect a USB Hard Drive and pause a TV broadcast or record

your favourite show.

Read more about Smart TV in Help > Smart TV.

Read more about setting up the Internet connection in Help >

Setup > Network.

3D Full HD

On this TV, you can watch 3D programmes and movies in full

High Definition resolution with 3D Max.

When 3D programmes are broadcast or you start a 3D movie,

the TV switches to 3D. All you need to do is to put on your

active 3D glasses.

Read more about 3D in Help > Basics > Watch 3D.

The remote control

To adjust the volume.

To switch TV channels.

To open or close the Home menu h.

Open the Home menu as a starting point to operate the TV.

In the Home menu, you can start or stop a TV activity, such as

watching TV - Watch TV - or watching a movie from a

connected DVD player.

Getting started / TV tour 3

Downloaded From TV-Manual.com Manuals

To open or close the FIND menu ¬.

Open the Find menu to open the list of channels while you are

watching TV channels or the list of videos and music while you

browse your PC on TV.

To open or close the ADJUST menu t

Open the Adjust menu to quickly adjust the picture and sound

settings.

You can set the Smart picture setting to Game, which is ideal for

gaming, or change the Smart sound setting of the TV

loudspeakers.

To open or close the OPTIONS menu r.

Open the Options menu to select optional settings related to

what you are watching or doing on TV.

Back È.

With Back, you can go back to the previous TV channel or go

one step back in a menu.

Red

With the red key, you can select the red option or open digital

Interactive TV or some TV demonstration clips.

Green

With the green key, you can select the green option or the Eco

settings.

4 Getting started / TV tour

Downloaded From TV-Manual.com Manuals

Yellow

With the yellow key, you can select the yellow option.

Blue

With the blue key, you can select the blue option.

Read more about the remote control in Help > Basics >

Remote control > Overview.

Or go to the ¬ Search page in this Help to look for any topic.

Press u to select the next TV tour.

Connecting devices

Use the HDMI™ connection to connect a DVD, Blu-ray Disc

player or game console.

The HDMI connection offers the best picture and sound quality

and, if your device has EasyLink (HDMI -CEC), the TV can add

the device to the Home menu automatically.

When a device is added to the Home menu, you can select it to

watch its programme. If the device has no EasyLink or you do

not use the HDMI connection, you must add the connected

device in the Home menu using Add your devices.

Read more about Add your devices in Help > Basics > Menus >

h Home.

Read more about using EasyLink in Help > Basics > Remote

control > Operate devices.

In the chapter Help > Connections, drawings like these will help

you to connect most common devices.

Getting started / TV tour 5

Downloaded From TV-Manual.com Manuals

HD TV

This TV can display High Definition programmes, but to enjoy

HD TV you need to get programmes in HD first. If you are not

watching HD programmes, the picture quality will be that of a

normal TV.

Watch HD TV programmes from . . .

• a Blu-ray Disc player

• a digital HD receiver connected with HDMI and with a

subscription to HD programmes

• over -the-air HD broadcasts

• channels offering HD on a digital network

• an HD game console connected with HDMI and playing an

HD game

HD video clip

To experience the stunning sharpness and picture quality of HD

TV, you can start the High Definition video clip from the Home

menu. Press Home > Setup > Watch demos (on the second

page of the Setup menu).

Contact your dealer for more information.

Go to www.philips.com/support to find FAQs featuring the list of

HD channels or providers in your country.

Satellite receiver

Next to the DVB-T and DVB-C reception, this TV has a built-in

satellite DVB-S/S2 receiver. You can connect a satellite dish

antenna and receive digital satellite channels.

Read more about Satellite Channels in Help > Setup > Satellite

channels.

6 Getting started / TV tour

Downloaded From TV-Manual.com Manuals

1.2 Setting up

Stand or wall mounting

The foot of the TV stand has the TV loudspeakers built-in.

Always connect the cable of the foot to the TV for sound. For

best sound, place the TV on a hard surface.

Wall mounting

With the foot and neck of the TV stand, you can mount the TV

to the wall. Combine the foot and neck to make a swivel mount

or alternatively use only the foot to mount the TV close to the

wall.

Find all mounting instructions in the Quick Start Guide that came

with the TV. In case you lost this guide, you can download the

guide from www.philips.com

Use the product type number of the TV to look for the Quick

Start Guide to download.

Caution

Wall mounting the TV requires special skills and should only be

performed by qualified personnel. The TV wall mounting should

meet safety standards according to the TV's weight. Read also the

safety precautions before positioning the TV.

TP Vision Netherlands B.V. bears no responsibility for improper

mounting or any mounting that results in accident or injury.

VESA info

Your TV is prepared for a VESA-compliant wall mount bracket

(sold separately). Find the suitable VESA code next to the TV

type number.

52PFL9606 - VESA MIS-F 300,300,M6

46PFL9706 - VESA MIS-F 300,300,M6

37PFL9606 - VESA MIS-F 200,200,M6

32PFL9606 - VESA MIS-F 200,100,M6

Use a screw length as shown in the drawing.

Position the TV

Carefully read the safety precautions before you position the TV.

• Position the TV where light does not shine directly on the

screen.

• Dim lighting conditions in the room for best Ambilight effect.

• Position the TV up to 25 cm away from the wall for the best

Ambilight effect.

Getting started / Setting up 7

Downloaded From TV-Manual.com Manuals

Position the TV at the ideal viewing distance. Get more from

HD TV picture or any picture without straining your eyes. Find

the 'sweet spot', right in front of the TV, for the best possible

TV experience and relaxed viewing.

The ideal distance to watch TV from is three times its diagonal

screen size. When seated, your eyes should be level with the

centre of the screen.

For best sound, place the TV on a hard surface.

Safety

Read and understand all instructions before you use the TV. If

damage is caused by failure to follow instructions, the warranty

does not apply.

Risk of electric shock or fire!

• Never expose the TV to rain or water. Never place liquid

containers, such as vases, near the TV. If liquids are spilt on or

into the TV, disconnect the TV from the power outlet

immediately. Contact Consumer Care to have the TV checked

before use.

• Never expose the TV, remote control or batteries to excessive

heat. Never place them near burning candles, naked flames or

other heat sources, including direct sunlight.

• Never insert objects into the ventilation slots or other openings

on the TV.

• Never place heavy objects on the power cord.

• Avoid force coming onto power plugs. Loose power plugs can

cause arcing or fire. Ensure that no strain is exerted on the

power cord when you swivel the TV screen.

• To disconnect the TV from the mains power, the power plug

of the TV must be disconnected. When disconnecting the power,

always pull the power plug, never the cord. Ensure that you have

full access to the power plug, power cord and outlet socket at all

times.

Risk of injury or damage to the TV!

• Two people are required to lift and carry a TV that weighs

more than 25 kg or 55 lbs.

• If you mount the TV on a stand, only use the supplied stand.

Secure the stand to the TV tightly. Place the TV on a flat, level

surface that can support the weight of the TV and the stand.

• When wall mounted, ensure that the wall mount can safely

bear the weight of the TV set. TP Vision Netherlands B.V. bears

no responsibility for improper wall mounting that results in

accident, injury or damage.

• Parts of this product are made of glass. Handle with care to

avoid injury or damage.

Risk of damage to the TV!

Before you connect the TV to the power outlet, ensure that the

power voltage matches the value printed on the back of the TV.

Never connect the TV to the power outlet if the voltage is

different.

Risk of injury to children!

Follow these precautions to prevent the TV from toppling over

and causing injury to children:

• Never place the TV on a surface covered by a cloth or other

material that can be pulled away.

• Ensure that no part of the TV hangs over the edge of the

mounting surface.

• Never place the TV on tall furniture, such as a bookcase,

without anchoring both the furniture and TV to the wall or a

suitable support.

• Teach children about the dangers of climbing on furniture to

reach the TV.

Risk of swallowing batteries!

The remote control may contain coin-type batteries which can

easily be swallowed by small children. Keep these batteries out of

reach of children at all times.

Risk of overheating!

Never install the TV in a confined space. Always leave a space of

at least 10 cm or 4 inches around the TV for ventilation. Ensure

curtains or other objects never cover the ventilation slots on the

TV.

Lightning storms

Disconnect the TV from the power outlet and antenna before

lightning storms. During lightning storms, never touch any part of

the TV, power cord or antenna cable.

Risk of hearing damage!

Avoid using earphones or headphones at high volumes or for

prolonged periods of time.

Low temperatures

If the TV is transported in temperatures below 5°C or 41°F,

unpack the TV and wait until the TV temperature reaches room

temperature before connecting the TV to the power outlet.

Screen care

• Never touch, push, rub or strike the screen with any object.

• Unplug the TV before cleaning.

• Clean the TV and frame with a soft damp cloth. Never use

substances such as alcohol, chemicals or household cleaners on

the TV.

• To avoid deformations and colour fading, wipe off water drops

as quickly as possible.

• Avoid stationary images as much as possible. Stationary images

are images that remain onscreen for extended periods of time.

Stationary images include onscreen menus, black bars, time

displays, etc. If you must use stationary images, reduce screen

contrast and brightness to avoid screen damage.

Screen care 46PFL9706

Moth eye

• For excellent brightness and contrast, even in bright daylight

conditions, the screen of this TV has a Moth-eye anti-reflective

finishing. Avoid touching the TV screen as much as possible. Only

remove the protective sheet after setting up the TV.

8 Getting started / Setting up

Downloaded From TV-Manual.com Manuals

• For eventual cleaning of the TV screen, only use the cleaning

cloth supplied with the TV. Use an alcohol based window

cleaner for greasy stains. Apply the liquid on the cloth first before

cleaning the screen. To replace the cloth supplied, contact

Consumer Care.

www.philips.com/support

The protective sheet is made from PET and is recyclable.

Temperature and humidity

In rare occasions, depending on temperature and humidity, minor

condensation can occur on the inside of the TV glass front (on

some models). To prevent this, do not expose the TV to direct

sunlight, heat or extreme humidity. If condensation occurs, it will

disappear spontaneously while the TV is playing for a few hours.

The condensation moisture will not harm the TV or cause

malfunction.

Getting started / Setting up 9

Downloaded From TV-Manual.com Manuals

1.3 Keys on the TV

Power switch

Switch the TV on or off with the power switch at the right-hand

side of the TV. When switched off, the TV does not consume

any energy.

If the red indicator light is off, switch on the TV with the power

switch.

If the red indicator is on (standby indication), press O on the

remote control to switch on the TV. Alternatively, you can

switch on the TV from standby with CH+, CH- or h. It takes a

few seconds for the TV to start up.

V Volume

Press V (Volume) - or + to adjust the volume. Or use the +

or - keys on the remote control.

Ambilight

Press Ambilight, to switch Ambilight on or off.

While the TV is on standby, you can switch Ambilight on and

create an Ambilight Lounge light effect in your room. Read more

about Ambilight and Lounge light in Help > Setup > Ambilight

h Home

Press h (Home) to open the Home menu on screen. You can

navigate the Home menu with the volume - or + (left or right)

and the channel - or + (down or up) keys on the TV. To

confirm your choice, press h again.

Read more about Home in Help > Basics > Menus > h Home

CH Channel

Press CH (Channel) - or + to switch channels. Or use the W or

X keys on the remote control.

10 Getting started / Keys on the TV

Downloaded From TV-Manual.com Manuals

1.4 Register your TV

Congratulations on your purchase and welcome to Philips.

Register your TV and enjoy a range of benefits including full

support (including downloads), privileged access to information

about new products, exclusive offers and discounts, the chance to

win prizes and even participate in special surveys about new

releases.

Go to www.philips.com/welcome

Getting started / Register your TV 11

Downloaded From TV-Manual.com Manuals

1.5 Help and support

Using Help and Search

Help

You can open Help from the Home menu. In most cases, you

can also press the yellow key on your remote control to open

or close Help directly. For some activities, like Text, the colour

keys have specific functions and cannot open Help.

Before you follow the Help instructions, close Help. Press the

yellow key or press h to close Help. When you press the

yellow key again, Help will open on the page where you closed

it.

¬ Search

In Help, use ¬ Search to find a topic you need. Select a topic

from the list with the navigation keys and press OK. The topic

you are looking for might not be on the first page but a few

pages further on. Press x to go to the next page.

Online support

To solve any Philips TV related problem, you can consult our

online support. You can select your language and enter your

product model number.

Go to www.philips.com/support

On the support site you can find your country's telephone

number to contact us as well as answers to frequently asked

questions (FAQs).

You can download new TV software or the manual to read on

your PC. You can email a specific question or, in some countries,

chat online to one of our collaborators.

Consumer Care

For support, you can call the Consumer Care hotline in your

country. Find the telephone number in the printed documentation

that came with the TV.

Or consult our website www.philips.com/support

TV model number and serial number

You might be asked to provide the TV product model number

and serial number. Find these numbers on the packaging label or

on the type label on the back or bottom of the TV.

12 Getting started / Help and support

Downloaded From TV-Manual.com Manuals

2

2.1

Basics

Remote control

Overview

1 Standby O

To switch the TV on or back to standby.

2 Home h

To open or close the Home menu.

3 Navigation key

To navigate up, down, left or right.

4 OK key

To activate a selection.

5 Find ¬

To open or close the channel list or your list of photos, music or

movies.

6 Adjust t

To open or close the most used settings for picture, sound,

Ambilight or 3D.

7 CH+ / Next W

To switch to the next channel, page or chapter.

8 CH- / Previous X

To switch to the previous channel, page or chapter.

9 Source Ú

To switch directly to a TV connection.

10 Options r

To open or close the Options menu.

11 Back È

To go back to the previous channel. To exit a menu without

changing a setting. To go back to the previous Text or Net TV

page.

12 Volume V

To adjust the volume level.

13 Mute m

To mute the sound or to restore it.

Basics / Remote control 13

Downloaded From TV-Manual.com Manuals

14 Red colour key

To open interactive TV or to select a Text page.

15 Green colour key

To open the Eco settings or to select a Text page.

16 Yellow colour key

To select a Text page.

17 Blue colour key

To select a Text page.

18 Number keys and text keypad

To select a TV channel directly or to enter text.

19 Format / Subtitles

To open or close the Format menu. / Keep this key pressed for

3 seconds to show or hide subtitles.

20 Text / Info

To open or close text. / Keep this key pressed for 3 seconds to

open or close information on next programmes.

Operate devices

The remote control of the TV can also operate a connected

device. The device must have EasyLink (HDMI-CEC) and have it

switched on. The device must also be connected with an HDMI

cable.

Operate an EasyLink device

To operate such a device with the TV remote control, select the

device -or its activity- in the h Home menu and press OK.

The commands of all keys, except the h key, the t ADJUST

key and the r OPTIONS key, are forwarded to the device.

Switch back to TV

To switch the remote control back to operate the TV, press h

(Home) and select Watch TV and press OK.

Show device keys

When operating a device, some of the keys might not be

available on the TV remote control. To make these keys

selectable on TV, press r OPTIONS and select Show device

keys. Select the key you need and press OK.

To hide the device keys, press È (Back).

In general, these keys open the following device menus:

1 Home menu

2 Setup menu

3 Disc menu (disc content)

4 Pop -up menu

5 Options menu

6 Programme guide

7 Media selection

One Touch Play

Insert a disc into an EasyLink HDMI-CEC device and press Play

on the device. The TV switches on from standby and starts

playing the disc.

System Audio Control

If you connect an EasyLink audio system, you can listen to the

audio from the TV through the audio system. The TV speakers

are muted automatically. You can control the volume of the

audio system with the TV remote control.

Surround mode

With recent Philips devices, you can change the surround sound

setting of the device on the TV. To change this setting, press t

ADJUST, select Surround mode and press OK. On Next mode,

press OK to toggle through the available modes on the device.

Smart sound

With recent Philips devices, you can change the Smart sound

setting of the device on the TV. To change this setting, press t

ADJUST, select Smart sound and press OK. Select a sound

mode from the list.

Screen off

If a recent Philips audio device only sends audio to the TV, the

device may suggest switching off the TV screen. To switch off

the screen when this message appears, select Screen off and

press OK. To switch the screen back on, press h (Home).

System Standby

Press O on the remote control to switch the TV and all

EasyLink devices to standby.

Read more about EasyLink in Help > Setup > Devices >

EasyLink HDMI-CEC.

IR sensor

Always make sure you point the remote control at the remote

control infrared sensor on the front of the TV.

14 Basics / Remote control

Downloaded From TV-Manual.com Manuals

Batteries

To replace the batteries of the remote control, slide open the

small tray at the bottom of the remote control. Use 2 coin-

shaped batteries (Type CR2032 – 3V). Make sure the + side of

the batteries (top side) point upwards. The small tray has a +

indicator.

Remove the batteries if you are not using the remote control for

a long time.

Dispose of batteries according to the end of use directives. Read

Help > Specifications > Environmental > End of use.

Cleaning

Your remote control is treated with a scratch-resistant coating.

To clean the remote control, use a soft damp cloth. Never use

substances such as alcohol, chemicals or household cleaners on

the TV or remote control.

Basics / Remote control 15

Downloaded From TV-Manual.com Manuals

2.2 Menus

h Home

In the Home menu, you start watching TV or start watching a

movie disc or any other TV activity.

Press h to open the Home menu.

To start an activity, select it with the navigation keys and press

OK.

To close the Home menu, press h again.

Add your devices

A connected device should be added to the Home menu for

easy selection.

If your connected device does not have EasyLink (HDMI -CEC)

or is not connected with an HDMI cable, you need to manually

add your device to the Home menu with Add your devices.

Devices with EasyLink (HDMI-CEC) and connected with an

HDMI cable automatically show their activity in the Home menu.

A single device can add several activities.

If an EasyLink device does not appear automatically, EasyLink on

the device may be switched off.

Add a device manually

In the Home menu, select Add your devices and press OK.

Follow the instructions on screen.

The TV asks you to select the device and the connection to

which the device is connected.

The device or its activities are now added to the Home menu.

Rename a device

To rename an added device or activity, select the device in the

Home menu and press r OPTIONS and select Rename. Use

the keypad on the remote control as you do for SMS/text

messaging to enter the new name.

Remove a device

To remove a device or activity from the Home menu, select it

and press r OPTIONS and then select Remove this device. If

a device or activity keeps appearing in the Home menu after you

deleted it, switch off the EasyLink setting on the device to

prevent the icon from being automatically added again.

Read more about EasyLink in Help > Basics > Remote control >

Operate devices.

Reorder

To reorder a device or an activity in the Home menu, select it

and press r OPTIONS.

1 Select Reorder.

2 With the navigation keys, reposition the device or activity

where you want it. You can only reorder the sequence of the

added devices and activities.

3 Press OK to confirm the position. All devices and activities shift

to the right.

You can highlight another device or activity and reposition it.

To stop Reorder, press r OPTIONS and select Exit reorder.

Restore device activities

To recall a deleted activity from a device with several activities,

select the device or one of its activities and press r OPTIONS.

Select Restore device activities and press OK. All deleted

activities of this device appear again.

¬ FIND

With ¬ FIND you open the Channel list while you are

watching TV channels or you open the list of pictures, music and

videos while browsing your PC or connected USB device.

Press ¬ FIND to open the list.

To close the list, press ¬ again.

t ADJUST

With the ADJUST menu, you can adjust picture, sound,

Ambilight and 3D settings quickly.

Press t ADJUST to open the Adjust menu.

Select your choice with the navigation keys and press OK.

To close the menu, press t ADJUST again.

16 Basics / Menus

Downloaded From TV-Manual.com Manuals

In the Adjust menu you can adjust these settings:

• 3D

• 3D depth

• Two player gaming

• Ambilight On or Off

• Ambilight dynamics

• Picture format

• Smart picture (presets)

• Smart sound (presets)

• Speakers

• Surround

• Picture shift

Ambilight

Read more about the Ambilight settings in Help > Setup >

Ambilight.

Picture format

Read more about the Picture format settings in Help > Basics >

Watch TV > Picture format.

Smart picture, Smart sound

You can set the TV to the pre-defined setting that best suits

what you're watching.

Read more about Smart settings in Help > Basics > Watch TV

> Smart picture and sound.

Speakers

To hear the sound through the TV speakers, close Help, press t

ADJUST, select Speakers and select TV.

Select Amplifier if you want to hear the sound through a

connected Home Theatre System or Amplifier.

These settings temporarily override any EasyLink settings.

Surround

To switch the TV automatically to the best surround sound mode

(only available when a Home Theatre System is connected), close

Help, press t ADJUST, select Surround and select On.

Picture shift

You can shift the picture on screen in a vertical or a horizontal

direction to view subtitles fully (depending on the TV input).

While watching TV, press t ADJUST, select Picture shift and

press OK. Shift the picture with the navigation keys. Press OK to

stop Picture shift.

r OPTIONS

With the OPTIONS menu, you select optional settings related to

what you are watching or doing on TV.

Press r OPTIONS at any time to see which options are

available.

To close the menu, press r OPTIONS again.

Basics / Menus 17

Downloaded From TV-Manual.com Manuals

2.3 Watch TV

Switch channels

To watch TV and switch channels, make sure the Watch TV

option is selected in the Home menu.

To watch TV, press h, select Watch TV and press OK.

To switch channels, press CH+ or CH- on the remote control.

You can use the number keys if you know the channel number

or press ¬ FIND to open the Channel list to select a channel.

To switch back to the previous channel, press È (Back).

Radio channels

If digital broadcasting is available, digital radio stations are installed

during installation. Switch to a radio channel just like you switch

to a TV channel. A DVB-C channel installation usually places radio

stations from channel number 1001 onwards.

Options for watching TV channels

If you watch digital broadcast TV channels, press r OPTIONS

to view the available options:

• What's on

• Status

• Video selection

What's on

This option shows information on the current and next

programme on this channel. Use the navigation keys to scroll

through text or to go to the next column.

Status

Depending on the broadcast, the Status page will show relevant

information. You can use this information to improve the channel

signal or to check if certain services are available.

Video selection

Digital TV channels can offer multi video signals (multi-feed

broadcasts), different camera viewpoints or angles of the same

event or different programmes on one TV channel. The TV

shows a message to advise if any such TV channels are available.

When available, press r OPTIONS and select Video selection

to select your choice.

Channel list

In the Channel list, you can look up all installed TV and radio

channels.

While watching TV, press ¬ FIND to open the Channel list.

Press ¬ FIND again or È (Back) to close the Channel list

without changing the channel.

In the Channel list, you can navigate to a TV channel or radio

station and press OK to watch the TV channel or listen to the

radio station.

The Channel list can have several pages. To view the next or

previous Channel list page, press W or X.

Channel list options

With the Channel list on screen, press r OPTIONS to select

the following options:

• Select list

• Mark as favourite

• Reorder

• Rename

Select list

Use this option to select which channels are shown in the

Channel list. The list you select here determines which channels

you flick through with CH+ and CH-.

Mark as favourite

When a channel is highlighted in the Channel list, you can set it

as a favourite channel.

Read Basics > Watch TV > Favourite channels.

Reorder

You can reposition channels within the list.

1 Press r OPTIONS and select Reorder to start reordering

channels.

2 Highlight a channel and press OK.

3 Reposition the channel where you want it with the navigation

keys. Alternatively, enter the new position directly with the

number keys.

18 Basics / Watch TV

Downloaded From TV-Manual.com Manuals

4 Press OK to confirm the position. You can insert the channel

or swap it.

You can highlight another channel and do the same.

To stop Reorder, press r OPTIONS and select Exit reorder.

Rename

You can rename a channel in the Channel list.

1 In the channel list, highlight the channel you want to rename.

2 Press r OPTIONS and select Rename to start renaming. You

can enter text directly with the remote control keypad or open a

full keyboard on top of the text entry menu.

Enter text with the remote control keypad

Use the navigation keys to position the cursor in the text. Press

È (Back) to delete a character.

Use the remote control keypad as you do for SMS/text

messaging to enter a character. Use the 1 key to select a special

character. Select Clear to delete a character.

Select Done to end Rename.

Enter text with the on-screen keyboard

To open the on-screen keyboard on top of the text entry menu,

press OK when the cursor in the text flashes.

On the keyboard, use the navigation keys to highlight a character

and press OK to enter it. To delete a character, press È (Back)

or highlight ! and press OK.

To switch from uppercase to lowercase or to a set of special

characters, press W (Next) or X (Previous).

To edit a character within a line of text, position the cursor on

this character and use the z and Z keys at both ends of the

on-screen spacebar.

To close the on-screen keyboard, highlight Done and press OK.

USB keyboard

You can use a connected USB keyboard to rename channels. To

connect a USB keyboard, read Help > Connections > Connect

more devices > Keyboard and mouse.

Favourite channels

In the Channel list you can mark a channel as a favourite. You

can set the Channel list to only zap through your list of favourite

channels.

To open the Channel list, while you are watching TV channels,

press ¬ FIND.

Mark a channel as favourite

While watching TV, press ¬ FIND to open the Channel list.

Navigate to the channel you want to mark as favourite and press

r OPTIONS. Select Mark as favourite.

In the Channel list, the favourite channel is marked with a F.

You can unmark a favourite channel with Unmark favourite.

Channel list of favourites

You can set the Channel list to only flick through your favourite

channels.

With the list on screen, press r OPTIONS and select Select

list. Select Favourites from the list and press OK. With this list

selected, you will only flick through your favourites.

Programme guide

If programme guide information is available in your area, you can

open an on-screen programme guide with scheduled TV

programmes.

The Programme guide is provided by the broadcaster or Internet.

Basics / Watch TV 19

Downloaded From TV-Manual.com Manuals

Open the Programme guide

While watching TV, press h, select Programme guide and press

OK.

To quit the Programme guide without changing a setting, press

È (Back).

First use

The first time you open the Programme guide, the TV scans all

TV channels for programme guide information. This can take

several minutes. The data is stored in the TV. The TV can store

programme data for up to eight days.

Programme guide options

With a programme selected in the guide, press r OPTIONS to

select the following:

• Set reminder

To set an on-screen reminder for when a programme is due to

start, select Set reminder and press OK. The programme is

reminder and press OK.

• Change day

View the previous or next day's programmes.

• More info

Shows the programme details and summary.

• Search by genre

View all programmes selected by genre.

• Scheduled reminders

If a reminder is set, you can view a list of all scheduled

reminders.

• Update programme guide

After the first scan, the TV stores the programme guide data. If

you update or reinstall channels or reorder the Channel list, you

will need to update the Programme guide.

To update, select Update programme guide. Reminders are

cleared.

Broadcaster or Network

To select where the Programme guide information comes from,

press h > Setup > TV settings > Preferences > Programme

guide.

Select From the network or From the broadcaster.

From the network

Until you link up with Net TV, programme guide information

comes from the broadcaster. Once you are connected with Net

TV, the TV switches automatically to the Internet for programme

guide information.

From the broadcaster

Guide information comes from the broadcaster/operator.

Smart picture and sound settings

For easy picture or sound adjustment, you can select a preset

setting for each.

While watching TV, press t ADJUST to open the Adjust menu

and select Smart picture or Smart sound . Make a selection from

the list and press OK.

Smart picture and Smart sound

Smart settings are a combination of preset settings suited to a

specific use such as gaming or daylight viewing.

You can adjust a specific setting, like Brightness or Contrast, Bass

or Treble, of a chosen smart setting. The smart setting will

remember the adjustments you made.

Adjust smart settings

To adjust a specific setting of a smart setting, select the smart

setting and press OK. Then press h and select Setup. Select

TV settings, navigate to the individual setting and adjust it.

To return to the original smart setting values, undo the

adjustments you made by first setting the TV in the smart setting

you want to reset. Then press h > Setup > TV settings, select

Reset and press OK.

Read more about adjusting separate settings in Help > Setup >

Picture and Sound and Ambilight.

Smart picture list

• Personal - Your choices made in Personalise picture and sound

• Vivid - Ideal for daylight viewing

• Natural - Natural picture settings

• Cinema - Ideal for watching movies

• Game - Ideal for gaming

• Energy saving - Energy-conscious settings

• Standard - Factory standard settings

• Photo - Ideal for viewing photos

• ISF Day and ISF Night - ISF Calibration settings

Smart sound list

• Personal - Your personal choices made in Personalise picture

and sound

• Standard - Factory standard

• News - Ideal for speech

• Movie - Ideal for watching movies

• Game - Ideal for gaming

• Drama - Ideal for TV soaps

• Sports - Ideal for sports programmes

Picture format

20 Basics / Watch TV

Downloaded From TV-Manual.com Manuals

La pagina sta caricando ...

Philips Model Vehicle 40PFL9606 Manuale utente

Questo manuale è adatto anche per

Philips Model Vehicle 40PFL9606 Manuale utente

in altre lingue

Documenti correlati

Altri documenti