ORIENT EU07007F Sports Manuale del proprietario

1

ENGLISH

MECHANICAL WATCH

INSTRUCTION MANUAL

Thank you for choosing our product. To ensure prolonged use and optimum

performance, please read this instruction manual carefully and familiarize

your-self with the terms of the guarantee.

Please keep this Instruction Manual handy for future reference.

 SAFETY PRECAUTIONS

Make absolutely sure to observe the demarcated contents indicated below to

prevent any possible physical danger and property damage to you as well as

other people concerned.

... A demarcation with this symbol represents the contents

assuming possibility for death or serious injury

when the product is used in any manner different from

given instructions.

... A demarcation with this symbol represents the contents

assuming possibility of causing human injury or

material damage only when a product is used in any

manner different from given instructions.

WARNING

!

CAUTION

!

2

ENGLISH

 IN HANDLING THE WATCH

(1) Water-resistance

Conditions

of use

Type

Underwater

operation of

crown and

operation

of crown

with drops

of water

on it

Exposure

to small

amounts

of water

(face-

washing,

rain, etc.)

Water sports

(swimming,

etc.),

frequent

contact with

water (car-

washing,

etc.)

Skin diving

(air tanks

are not

used)

Scuba

diving

(air tanks

are used)

Mixed-gas

Diving

(using

helium

gas)

Non water resistant

Without

WATER

RESISTANT

(WATER

RESIST)

× × × × × ×

Water

resistant

watches

Water

resistant for

daily life

WATER

RESISTANT

(WATER

RESIST)

×



× × × ×

Reinforced

water

resistance

for daily

life I

WATER

RESISTANT

(WATER

RESIST)

50m (5bar)

×

 

× × ×

Reinforced

water

resistance

for daily

life II

WATER

RESISTANT

(WATER

RESIST)

100m (10bar)

200m (20bar)

×

  

× ×

Diver’s

watches

Diver’s

watch for Air

Diving

AIR DIVER’S

100m / 150m

200m

×

   

×

Diver’s

watch for

Mixed-gas

Diving

He-GAS

DIVER’S

200m / 300m /...

×

    

* It is recommended that you use the watch correctly following the above-mentioned scope of usage

after ascertaining water resistance precautions marked on the dial or caseback.

3

ENGLISH

1 A watch with water resistance for daily life 30m (3 bar) can be used during

face-washing, etc. but cannot be used in an environment in which it will be

submerged in water.

2 A watch with reinforced water resistance for daily life I 50m (5 bar) can be

used while swimming, etc. but cannot be used during any type of diving

including skin diving.

3 A watch with reinforced water resistance for daily life II 100m or 200m (10

or 20 bar) can be used while skin diving, but cannot be used while scuba

diving using oxygen tanks or saturation diving using helium gas, etc.

4 Keep the crown pushed in at all times (in the normal position) while using

the watch. If the crown is the screwed-down type, check that it is securely

screwed down.

5 Do not operate the crown underwater, or while the watch is wet. Water

may enter the interior of the watch and defeat the water resistance.

6 If your watch is non-water resistant, beware of splashes of water (during

face washing, rain, etc.) and sweat. If the watch becomes wet from water

or sweat, wipe the moisture off with a dry, soft cloth.

7 Even with a water resistant watch for everyday use, avoid directing strong

jets of mains water onto the watch. Water pressure above the limit can

apply, which may defeat the water resistance.

8 With a water resistant watch for everyday use, rinse sea water off the case

after exposure, then wipe it thoroughly to avoid corrosion and other effects.

9 The interior of the watch contains some amount of moisture, which may

cause fogging on the inside of the glass when the outside air is cooler than

the internal temperature of the watch. If the fogging is temporary it causes

no harm inside the watch, but if prolonged, or if water enters the watch,

consult your place of purchase and do not leave the problem untreated.

CAUTION

!

WARNING

!

4

ENGLISH

(2) Shock

1 Be sure not to carry the watch when you engage in strenuous

sports, whereas playing such light sports as golf, etc., will not

adversely influence the watch.

2 Avoid a violent shock such as dropping the watch on the

floor.

(3) Magnetism

1 If the watch is left at a location with strong magnetism for an extended

period of time, the components may be magnetized, resulting in

malfunction. Be careful.

2 The watch may temporarily speed up or slow down when exposed to

magnetism. Precision is restored when placed away from magnetism. In

such a case, reset the time.

(4) Vibration

The watch may lose precision if subjected to strong

vibrations such as from riding motorcycles, using

jackhammers, chain saws, etc.

(5) Temperature

In environments below and above normal temperatures (5°C-35°C), the

watch may malfunction and stop.

Do not use the watch at high temperatures, such as in a sauna. The watch

may heat and cause burns.

(6) Chemicals, Gases, etc.

Utmost caution must be exercised when coming into contact with gases,

mercury, chemicals (paint thinner, gasoline, various solvents, detergents

containing such components, adhesives, paint, drugs, perfumes,

cosmetics, etc.), and so forth. Such may cause discoloration of the

watchcase, watchband, and dial face. Discoloration, deformation, and

damage to various resin-based component parts may also occur.

CAUTION

!

5

ENGLISH

(7) About accessory parts

Do not attempt to disassemble or modify the watch.

Store the bracelet/strap pin and other small parts out of the reach of

children.

If any small parts are swallowed, immediately contact a doctor.

(8) Allergic reactions

If you develop a skin rash or your skin becomes abnormally irritated due to

contact with the watch or strap, stop wearing the watch immediately and

consult a doctor.

(9) About “luminous light”

Some models have luminous light on the hands and dial.

The luminous light is a safe paint that stores sunlight and artificial light

without using any radioactive material, and emits that light in a dark

setting. As the paint discharges the stored light, it will become dimmer

over time. The amount of light emitted and the time that light is emitted

depends on various factors when the light is stored, such as the shape

of the glass, the thickness of the paint, surrounding brightness level, the

distance from the watch to the light source, and the light absorption level.

Please note that when not enough light energy is stored, the watch may

emit weak light or emit light for only a short time.

(10) Water resistant watchband

Some models employ leather and nylon bands on which a special

treatment to resist perspiration and water absorption have been applied.

Please understand that the water resisting effect of this watchband can be

lost depending on the period and conditions of use.

WARNING

!

CAUTION

!

CAUTION

!

6

ENGLISH

 HOW TO IDENTIFY THE CALIBER NUMBER

Check the caliber number by referring to the model number of your watch or

the case code on the watch’s case back.

1. Searching by 10-digit model number

Check the 10-digit model number on the guarantee supplied with your watch.

You can also see the number on the product tag put on the watch. Its second

and third digits indicate the caliber number of your watch.

Example: If the model number is “ FX01002B ”, the caliber number is “FX”.

2. Searching by the case code

See the case code on the case back of your watch.

A: If the case code is 6 digits, the first two digits indicate the caliber number.

B: If the case code is 8 or 9 digits, the first three digits indicate the movement

number. Search the caliber number corresponding to the movement

number referring to the correspondence table.

Example A

Example B

Case code

Example A : When the case code is “FX01-C0”, the caliber number is “FX”.

Example B : When the case code is “46D001-9”, the movement number is

“46D”. The caliber number corresponding the number will be

found “EU” on the table.

* The place of case code may vary and its letter size may be small and

difficult to see depending on the characteristics of watches.

* The pictures and illustrations on this manual may differ from the actual

appearance of your watch but the function and operation procedures are

the same.

7

ENGLISH

 SPECIFICATIONS

Caliber

Number

of Jewels

Date Day of week 24H hand Daily accuracy Remark1*

ES 46C 21

○

Hand Indicating type

– +25~-15s/day

9:00 p.m. ~ 2:00 a.m.

ET 46B 21

○

Hand Indicating type

○

+25~-15s/day

9:00 p.m. ~ 2:00 a.m.

EU 46D 21

○ ○

– +25~-15s/day

9:00 p.m. ~ 2:00 a.m.

EV 46E 21

○

Wide type

– +25~-15s/day

10:00 p.m. ~ 1:00 a.m.

FE 46P 21

○

–

○

+25~-15s/day

9:00 p.m. ~ 2:00 a.m.

FN 46V 21

○

Wide+AM/PM

– +25~-15s/day

9:00 p.m. ~ 3:00 a.m.,

10:30 a.m. ~ 1:30 p.m.

FP 46W 21

○

Dot or arrow

indicating

– +25~-15s/day

9:00 p.m. ~ 3:00 a.m.

FX 46Y 21

○ ○

– +25~-15s/day

9:00 p.m. ~ 2:00 a.m.

(1) Vibrations: 21.600 vibrations/hour

(2) Running time: More than 40 hours

(3) Shock-proof bearings to protect the balance with hairspring from shocks.

The stated daily accuracy is in the following conditions:

• After 24 hours at room temperature with the mainspring wound fully and the

dial facing up.

• Due to the characteristics of the automatic winding watch, the time may

deviate from the stated “daily accuracy” depending on the following

conditions: amount of time the watch is worn each day, position of the

watch, movement of your arm, winding condition of the mainspring.

Product specifications may change without notice, for improvement.

CAUTION

!

* Avoid setting the date during the time periods listed in “Remark1” above

since the calendar changes during this time. If the date is set during this

time period, the date may not change or the watch may malfunction. Be

sure to move the hour and minute hands away from this time period when

setting the date.

8

ENGLISH

 NAMES OF INDIVIDUAL COMPONENT PARTS

A: Hour hand

B: Minute hand

C: Second hand

D: Date

E: Day of the week

F: 24-hour hand

G:

Crown

H: Click button

I: Dial

<ES(46C), ET(46B)>

A

E

G

D

I

B

F

C

A

E

B

G

D

I

<EU(46D)>

A

B

D

I

H

G

C

Month

Year ring

<EV(46E)>

Multi-year calendar

9

ENGLISH

<FE(46P)> <FN(46V)>

A

C

I

G

D

B

F

N

M

P

A

F

T

A

U

S

N

O

M

8

R

I

B

H

E

D

CA

G

AM / PM

<FP(46W)> <FX(46Y)>

A

C

I

B

H

D

G

Month-long

calendar

SUNMON TU EWED THUFRISAT

8

A

E

C

I

B

H

D

G

* The position of the crown, date indicator, etc. may vary on some models.

10

ENGLISH

 AUTOMATIC WINDING MECHANISM

(1) This is an automatic winding mechanical watch.

(2) The mainspring is wound by natural movements of your

arm when wearing the watch on your wrist.

(3) If your watch stops, swing the watch back and forth ten

or more times to re-start the second hand. After it starts

moving, set the date and time.

(4) This watch will run approximately 40 hours after it is fully

wound. If it is not wound enough, the watch may lose

accuracy. In order to maintain the watch’s accuracy, we recommend

wearing the watch at least 8 hours a day.

 MODELS WITH SCREWED-DOWN CROWN

Depending on the model, you may not be able to pull the crown out without

unscrewing it (models with screwed-down crown).

Operate this type of watch as follows:

(1) Before setting the date and time, first turn the crown to the left to loosen

the screw lock.

(2) After setting the date and time, turn the crown to the right while pressing

in, until it stops turning to securely tighten the screw.

11

ENGLISH

 HOW TO SET THE TIME

[EU(46D), FX(46Y), FE(46P), FN(46V), FP(46W)]

(1) Pull out the crown to the second click.

The second hand does not stop.

(2) Turn the crown clockwise and set the

current time.

Since this watch comes with a calendar,

make sure that you set either a.m. or

p.m. without fail.

The date changes at [twelve o’clock

midnight].

When setting the time, first bring the

hand back slightly earlier the actual

time and then move it forward to the

actual time.

(3) Press the crown in to the normal

position.

Turn clockwise

12

ENGLISH

 HOW TO SET THE DATE [ALL MODELS]

(1) Pull the crown out to the first click.

The crown on this watch can be pulled out

to the first and second clicks.

(2) Turn the crown counterclockwise until you

reach today’s date.

(3) Press the crown in to the normal position.

The position of the crown, date indicator, etc. may vary on some models.

About date correction at month’s end:

Date correction is necessary for months with 30 days or less. Set the date to

the [1st day] on the first day of the next month.

* ET(46B)

The 24-hour hand moves in conjunction with the hour

hand and cannot be set by itself.

Some watches may display time using pictures or

symbols (Sun & Moon) instead of the 24-hour hand.

Turn

counterclockwise

13

ENGLISH



HOW TO SET THE TIME & DAYS OF THE WEEK [ES(46C), ET(46B)]

Set the day of the week first by turning the hour hand and minute hand

since this watch does not come with a correcting mechanism for the day of

the week.

(1) Pull the crown out to the second click. (Second

hand does not stop.)

(2) At first, turn the crown and set the day of the

week.

Turn the crown clockwise until the hand

indicates the day of the week.

Turn the crown counterclockwise and bring

back the

hands to

about 11:30

p.m. (At this

time, the day

of the week

does not

change.)

Again, turn the crown clockwise until the hand

indicates the next day of the week.

Repeat this operation and set the day of the

week.

(3) Turn the crown clockwise to set the time.

* Since this watch comes with a calendar, be

sure to set either a.m. or p.m.

The date changes at [twelve o’clock midnight].

Also, you can check a.m. and p.m. with the 24-

hour hand.

Some models may use a picture-based system

(Sun & Moon) instead of the 24-hour hand. The

time is twelve o’ clock midnight when the Moon

symbol is at the top of the window.

* When setting the time, first bring the hand

back slightly later than the actual time and then

move it forward to the actual time.

(4) Press the crown in to the normal position.

Turn clockwise

14

ENGLISH

 HOW TO SET THE TIME & DAYS OF THE WEEK [EV(46E)]

Set the day of the week first by turning the

hour hand and minute hand since this watch

does not feature a correcting mechanism for

the day of the week.

(1) Pull the crown out to the second click.

(Second hand does not stop.)

(2) At first, turn the crown and set the day of the

week.

Turn the crown clockwise until the hand

indicates the day of the week.

If a day of the week is between two days of the

week, turn the crown until a day is shown.

Turn the crown counterclockwise and bring

back the hands to about 11:30 p.m. (At this

time, the day of the week does not come

back.)

Again, turn the crown clockwise until the next

day of the week is shown.

Repeat this operation and set the day of the

week.

(3) Turn the crown clockwise to set the time.

Since this watch comes with a calendar,

be sure to set either a.m. or p.m.

The date changes at [twelve o’clock

midnight].

When setting the time, first bring the hand

back slightly later than the actual time and

then move it forward to the actual time.

(4) Press the crown in to the normal position.

Turn clockwise

15

ENGLISH

 HOW TO SET THE DAY OF THE WEEK & AM/PM [FN(46V)]

Press the click button at the two o’clock position to set AM/PM and the day

of the week.

When setting the time, be sure that AM/PM is set correctly.

Example: Changing the display from SUN AM to MON AM

(1) Press the click button to change the display from SUN AM to SUN PM.

(2) Press the click button again to change SUN PM to MON AM.

N

M

P

A

F

T

A

U

S

N

O

M

R

N

M

A

P

T

A

U

S

N

O

M

E

U

N

M

P

A

S

N

U

O

S

M

E

U

T

A

* For types of watches with a click button that cannot be pressed with your

finger (i.e. the “hidden button” type)

The day of the week can be set by pressing the click button using a sharp,

pointed object such as a precision screwdriver, a pair of tweezers or a metal

pin.

The layout of the days of the week and the location of the window vary from

model to model.

16

ENGLISH

 HOW TO SET THE DAY OF THE WEEK [FP(46W)]

There are models that indicate the day of the week with l (dot) or ▲ (arrow).

Though display methods are different, operation methods are the same.

See below for operation methods.

(Dot-indicating type)

Press the click button at the two o’clock position to set the day of the week.

SUN MONTUE WEDTHU FRI SAT

(Arrow-indicating type)

Press the click button at the two o’clock position to set the day of the week.

* For types of watches with a click button that cannot be pressed with your

finger (i.e. the “hidden button” type)

The day of the week can be set by pressing the click button using a sharp,

pointed object such as a precision screwdriver, a pair of tweezers or a metal

pin.

The layout of the days of the week and the location of the window vary from

model to model.

17

ENGLISH

◆ HOW TO USE THE MULTI-YEAR CALENDAR [EU(46D)]

[NAMES AND FUNCTIONS OF COMPONENT PARTS]

Month

Click button

Day of the week

Last two digits

of the year

Dates (for 1 month)

* The click button, location of the date indicator, and style of the month

indicator may vary by model.

[HOW TO SET THE MULTI-YEAR CALENDAR]

Press the click button until the month to be set lines up with the last two digits

of the year to be set at the top of the dial.

* To display the month of January or February during a leap year, line up the

last two digits of the year with the appropriate

1

or

2

in the black box.

The last two digits of the year for a leap year are printed in red.

A calendar with the days for the specified month in their appropriate places is

displayed at the bottom of the dial.

18

ENGLISH

◆ HOW TO USE THE DUAL TIME FUNCTION [FE(46P)]

You can see the time for two different time zones, one for the city you are in

and another for any other city, using the rotating bezel and the 24-hour hand.

(1) First be sure that the watch is showing the correct time.

(2) Get the time difference for the city you want to know the time of. (See

Comparison table of standard times.)

(3) When the time difference is a negative number, turn the bezel clockwise to

that number of hours. When the time difference is positive, turn the bezel

counterclockwise to that number of hours.

(4) The number on the bezel where the 24-hour hand is pointing will be the

time in the city you selected.

Example: When you want to know the time in London while you are in Japan

London time is 9 hours behind Japan. Therefore, turn the rotating bezel

clockwise 9 hours. The hours and minutes shown by the watch hands is the

time in Japan. The number on the bezel where the 24-hour hand is pointing

is the time in London. (Japan time: 10:09 a.m., London time: 01:09 a.m.)

24

22

20

18

16

14

12

10

8

6

4

2

8

24

22

20

18

16

14

12

10

8

6

4

2

8

Example: When you want to know the time in Japan while you are in London

Japan time is 9 hours ahead of the time in London. Therefore, turn the

rotating bezel counterclockwise 9 hours. The hours and minutes shown by

the watch hands is the time in London. The number on the bezel where the

24-hour hand is pointing is the time in Japan. (London time: 10:09 a.m.,

Japan time 07:09 p.m.).

24

22

20

18

16

14

12

10

8

6

4

2

8

24

22

20

18

16

14

12

10

8

6

4

2

8

19

ENGLISH

◆ USING THE ROTATING WORLD TIME RING

When you turn the rotating indicator ring and align the city names with the

times, you can read the respective times of the cities right away.

Example: It is 10:00 p.m. in Tokyo now.

(1) In the 24-hour system, 10:00 p.m. is 22:00 hours.

(2) Set TOKYO on the World Time

Ring to the 22-hour position of

the 24-hour scale.

* The World Time Ring comes in

various types, such as with a

crown for setting world time or

with a rotating bezel.

(3) The position that CHICAGO on

the World Time Ring indicates

is the time in Chicago.

* The position indicated by each

scale on the World Time Ring represents the time in that country.

Using this method, you can simultaneously see the time in countries around

the world by using the scales on the World Time Ring and reading the dial.

* The position of the inner ring crown and details of the date indicator may

vary depending on the model.

World

Time Ring

24-hour

scale

TOKYO

CHICAGO

20

ENGLISH

 COMPARISON TABLE OF STANDARD TIMES

City indication Typical city Time differences with GMT

GMT GMT ±0

PAR PARIS +1

CAI CAIRO +2

MOW MOSCOW +3

DXB DUBAI +4

KHI KARACHI +5

DAC DHAKA +6

BKK BANGKOK +7

BJS BEIJING +8

TYO TOKYO +9

SYD SYDNEY +10

NOU NOUMEA +11

AKL AUCKLAND +12

MDY MIDWAY -11

HNL HONOLULU -10

ANC ANCHORAGE -9

LAX LOS ANGELES -8

DEN DENVER -7

CHI CHICAGO -6

NYC NEW YORK -5

SDQ S. DOMINGO -4

RIO RIO DE JANEIRO -3

SGS S.GEORGIA -2

PDL AZORES -1

* Some countries use daylight savings time. There may be cases where

the time difference and daylight savings time change to suit the country’s

convenience.

* The city names listed are major cities in various countries of the world.

Please note in advance that some product specifications are subject to

change for product improvement purposes.

* If planning to use the watch in a place not listed in the table above, select a

city in the same time zone as the city for which you want to indicate time.

La pagina si sta caricando...

ORIENT EU07007F Sports Manuale del proprietario

ORIENT EU07007F Sports Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti