ProLights MOSAICO Manuale utente

USER MANUAL

MANUALE UTENTE

MOSAICO

EN - IT

OUTDOOR LED PROJECTOR

reproduced in any form or by any means for any commercial use.

In order to improve the quality of products, Music&Lights S.r.l. reserves the right to modify the

characteristics stated in this instruction manual at any time and without prior notice.

All revisions and updates are available in the ‘manuals’ section on site www.musiclights.it

REV.07-09/20

1

MOSAICO

Packing content

• MOSAICO

• Power adapter cable

• Signal adapter cable (2 pcs)

• User manual

TABLE OF CONTENTS

Safety

General instructionsGeneral instructions

Warnings and installation precautionsWarnings and installation precautions

1 Technical drawing

1. 1 Operating elements and connections1. 1 Operating elements and connections

2 Installation

2. 1 Mounting2. 1 Mounting

2. 2 Mounting with optional bracket2. 2 Mounting with optional bracket

3 Functions and settings

3. 1 Operation3. 1 Operation

3. 2 Basic3. 2 Basic

3. 3 Menu structure3. 3 Menu structure

3. 4 Connect 3. 4 Connect

3. 5 DMX Address3. 5 DMX Address

3. 6 DMX Mode3. 6 DMX Mode

3. 7 Wireless3. 7 Wireless

3. 8 DMX addressing3. 8 DMX addressing

3. 9 Fixture settings3. 9 Fixture settings

3. 10 Auto test3. 10 Auto test

3. 11 Manual test3. 11 Manual test

3. 12 Advanced3. 12 Advanced

3. 13 Information on the device3. 13 Information on the device

3. 14 Operations in automatic Mode3. 14 Operations in automatic Mode

3. 15 DMX Control3. 15 DMX Control

3. 16 Color and rotating gobos3. 16 Color and rotating gobos

3. 17 Connection of the DMX line3. 17 Connection of the DMX line

3. 18 Construction of the DMX termination3. 18 Construction of the DMX termination

4 Maintenance

4. 1 Maintenance and cleaning the unit4. 1 Maintenance and cleaning the unit

4. 2 Trouble shooting4. 2 Trouble shooting

4. 3 Animation wheel replacement4. 3 Animation wheel replacement

4. 4 Gobos replacement4. 4 Gobos replacement

2

3

4

5

6

7

8

11

13

14

18

22

23

24

25

26

MOSAICO

2

SAFETY

General instruction

• The products referred to in this manual conform to the European Community Directives and are there-

fore marked with .

• The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.

Never make any modications on the unit not described in this instruction manual, otherwise you will

risk an electric shock.

• Connection must be made to a power supply system tted with ecient earthing (Class I appliance ac-

cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units

from indirect contact and/or shorting to earth by using appropriately sized residual current devices.

• The connection to the main network of electric distribution must be carried out by a qualied electrical

installer. Check that the main frequency and voltage correspond to those for which the unit is designed

as given on the electrical data label.

• This unit is not for home use, only professional applications.

• Never use the xture under the following conditions:

- in places subject to vibrations or bumps;

- in places with a temperature of over 45 °C.

• Make certain that no inammable liquids, water or metal objects enter the xture.

• Do not dismantle or modify the xture.

• All work must always be carried out by qualied technical personnel. Contact the nearest sales point for

an inspection or contact the manufacturer directly.

• If the unit is to be put out of operation denitively, take it to a local recycling

plant for a disposal which is not harmful to the environment.

Warnings and installation precautions

• If this device will be operated in any way dierent to the one described in this manual, it may suer

damage and the guarantee becomes void. Furthermore, any other operation may lead to dangers like

short circuit, burns, electric shock, etc.

• Before starting any maintenance work or cleaning the projector, cut o power from the main supply.

• Always additionally secure the projector with the safety rope. When carrying out any work, always com-

ply scrupulously with all the regulations (particularly regarding safety) currently in force in the country

in which the xture’s being used.

• Keep any inammable material at a safe distance from the xture.

• Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent

that their eectiveness is impaired.

• The lamp (LED) shall be changed if it has become damaged or thermally deformed.

• Never look directly at the light beam. Please note that fast changes in lighting, e. g. ashing light, may

trigger epileptic seizures in photosensitive persons or persons with epilepsy.

• Do not touch the product’s housing when operating because it may be very hot.

• This product was designed and built strictly for the use indicated in this documentation. Any other use,

not expressly indicated here, could compromise the good condition/operation of the product and/or

be a source of danger.

• We decline any liability deriving from improper use of the product.

WARNING! Before carrying out any operations with the unit, carefully read this instruction

manual and keep it with cure for future reference. It contains important information about

the installation, usage and maintenance of the unit.

3

MOSAICO

- 1 - TECHNICAL DRAWING

Fig.1Technical drawing

MOSAICO

4

1.1 OPERATING ELEMENTS AND CONNECTIONS

1. MOUNTING BRACKET

2. 2x HEXAGONAL HEAD SCREW SYSTEMS for

side, to tighten the bracket.

3. DMX IN (5-pole XLR): 1 = ground, 2 = DMX-, 3 =

DMX+, 4 N/C, 5 N/C.

4. DMX OUT (5-pole XLR): 1 = ground, 2 = DMX-,

3 = DMX+, 4 N/C, 5 N/C.

5. POWER IN: for connection to a socket

(100-240V~/50-60Hz) via the supplied mains

cable.

6. POWER OUT: connect to supply power to the

next unit

7. CONTROL PANEL with display and 4 button

used to access the control panel functions and

manage them.

Fig.2

Rear panel

3

2

1

2

7

4

5

6

5

MOSAICO

- 2 - INSTALLATION

2.1 MOUNTING

MOSAICO may be set up on a solid and even surface. The unit can also be mounted upside down to a cross

arm. For xing, stable mounting clips are required. The mounting place must be of sucient stability and

be able to support a weight of 10 times of the unit’s weight.

When carrying out any installation, always comply scrupulously with all the regulations (particularly re-

garding safety) currently in force in the country in which the xture’s being used.

• Install the projector at a suitable location by means of the mounting bracket (1).

• Always additionally secure the projector with the safety rope from falling down. For this purpose, fas-

ten the safety rope at a suitable position so that the maximum fall of the projector will be 20 cm.

• Adjust the projector and use the knob (2) to slightly release or tighten the locking mechanism of the

bracket if is necessary.

1

2

Fig.3

MOSAICO

6

Fig.4 - Example with poles with square cross-section of 150x150 mm

2.2 MOUNTING WITH OPTIONAL BRACKET

MOSAICO bracket for wall mounting and suspension on poles with square cross-section with diam-

eter from 50x50 mm to 150x150mm or circular cross-section with diameter from 50 mm to 150 mm.

N.B.: Only the connection kit MOSAICO - bracket (3 pcs M12 screws, 3 pcs nuts) is included in the package.

• Check that all accessories have been

supplied with the product before

installation. The manufacturer is not

responsible for any damage or loss

of accessories after opening the in-

ner packaging.

• Do not use the product for purposes

other than those described.

• When mounting / using the moun-

ting bracket, be sure to avoid dama-

ging the product and causing safety

hazards.

• Do not mount the bracket on a ver-

tical support whose surface shows

deformations, injuries, crushing, etc.

• Make sure all screws, bolts, nuts are

fully tightened.

• Make sure that no external force is

applied to the installed product.

• Locate the position of the optional

MOSUNIBRACK bracket at a suitable

height..

• Both the bracket and the MOSAICO

must be secured with a safety rope.

7

MOSAICO

- 3 - FUNCTIONS AND SETTINGS

3.1 OPERATION

Connect the supplied main cable to a socket (100-240V~/50-60Hz). Then the unit is ready for operation

and can be operated via a DMX controller or it independently performs its show program in succession.

To switch o, disconnect the mains plug from the socket. For a more convenient operation it is recom-

mended to connect the unit to a socket which can be switched on and o via a light switch.

3.2 BASIC

Access control panel functions using the four panel buttons located directly underneath the LED Display

(g.4).

MENU

UP DOWN ENTER

Used to access the menu or

to return a previous menu

option

Navigates downwards through

the menu list and increases

the numeric value when in a

function

Navigates upwards through

the menu list and decreases

the numeric value when in

a function

Used to select and store the

current menu or conrm the

current function value or

option within a menu

Fig.4 - Functions of the buttons

Mode

Enter

Up

Down

MOSAICO

8

3.3 MENU STRUCTURE

MENU

1 CONNECT

ð

DMX Address

ð

Value (1-512)

Default: 1

DMX Mode

ð

12 CH

14 CH

16 CH

19 CH

Default: 12CH

Wireless Receive On/O

ð

On/O

Default: O

Receive Reset

ð

Yes/No

Default: No

Wireless to DMX

ð

Yes/No

Default: No

2 SET UP

ð

Screen

ð

Backlight

ð

On

10s

20s

30s

Default: 10s

Flip Display

ð

Yes/No

Default: No

Warn Cue

ð

On/O

Default: On

Key Lock

ð

Yes/No

Default: No

Fixture

ð

Fan mode

ð

Auto/High

Default: Auto

Temperature unit

ð

°C/°F

Default: °C

Auto Test

ð

Auto Test

Manual Test

ð

Shutter

Dimmer

Color1

Color2

Gobo

RGobo

PrismRot

Frost

Focus

Zoom

Animation

RAnimation

ð

Value (000-255) for each

function

Default:

Dimmer=255

Shutter = 255

3 ADVANCED

ð

Reset

ð

All

Color 1

Color 2

Gobo

Prism

Frost

Focus

Zoom

Animation

ð

Yes/No

Adjust

(Password: 050)

ð

Color1 Oset

Color2 Oset

Gobo Oset

RGobo Oset

Prism Oset

RPrism Oset

Frost Oset

Focus Oset

Zoom Oset

Animation Oset

ð

Value (000-255) for each

function

Factory Reload

ð

Yes/No

9

MOSAICO

4 INFORMATION

ð

Fixture Time

ð

0-9999

Default: 0

Temperature

ð

** °C

Fans Speed

ð

**%

Software

Version

ð

DISP: V1.0

CTR1:V1.0

CTR2:V1.0

UID

ð

15D0******

View

5 STAND ALONE

ð

Play

ð

O Default:O

Show

ð

Show 1

Show 2

Show 3

Default: Show 1

Chase

ð

Chase 1

...

Chase 8

Default: Chase 1

Scene

ð

Scene 1

…

Scene 32

Default: Scene 1

Edit Show

ð

Edit Show 1

Edit Show 2

Edit Show 3

ð

Chase 1(On-O) - Chase 8(On-O)

Default: O

Edit Chase

ð

Edit Chase 1

Edit Chase 2

Edit Chase 3

Edit Chase 4

Edit Chase 5

Edit Chase 6

Edit Chase 7

Edit Chase 8

ð

Step 1-16

O - Scenes1-32

Default: O

Edit Scenes

ð

Edit Scenes 01

Edit Scenes 02

Edit Scenes 03

......

Edit Scenes 30

Edit Scenes 31

Edit Scenes 32

ð

New/Edit Scene

ð

Shutte/Dimmer/

Color1/Color2/

Gobo...

Shutte/Dimmer/

Color1/Color2/

Gobo...

Shutte/Dimmer/

Color1/Color2/

Gobo...

...

Shutte/Dimmer/

Color1/Color2/

Gobo...

Shutte/Dimmer/

Color1/Color2/

Gobo...

Shutte/Dimmer/

Color1/Color2/

Gobo...

Default:

Dimmer: 255

Shutter: 255

Focus: 128

Zoom: 128

All others at 0

Copy Scene

ð

O

Scenes 01

Scenes 02

Scenes 03

...

Scenes 30

Scenes 31

Scenes 32

MOSAICO

10

Scenes Record

ð

Scenes 01

Scenes 02

Scenes 03

......

Scenes 30

Scenes 31

Scenes 32

ð

*

DMX - Scenes Record

Slave setup

ð

Edit Scenes 01

Edit Scenes 02

......

Edit Scenes 30

Edit Scenes 32

ð

RGobo/ Focus/Zoom/RShutter

......

RGobo/ Focus/Zoom/RShutter

Default:

RGobo: 0

Focus: 128

Zoom: 128

RShutter:0

Scenes Time

ð

Scene 01 Time

Scene 02 Time

Scene 03 Time

......

Scene 30 Time

Scene 31 Time

Scene 32 Time

ð

Fade in Time

Hold Time

Fade Out Time

ð

0000.0 -

3600.0

Default: 0000:0s

0001:0s

0000:0s

Chase Time

ð

Chase 1 Time

Chase 2 Time

Chase 3 Time

Chase 4 Time

Chase 5 Time

Chase 6 Time

Chase 7 Time

Chase 8 Time

ð

0000.0 - 3600.0 Default: 0001.0s

Move blackout

ð

Scene 01

Scene 02

Scene 03

......

Scene 30

Scene 31

Scene 32

ð

O-On Default: No

11

MOSAICO

3.4 CONNECT

Several units may be interconnected in order to control all further slave units to the same eect of the

master unit.

1. Connect the DMX OUT of the master unit via 5-pole XLR cable to the DMX IN of the rst slave unit.

2. Connect the DMX OUT of the rst slave unit to the DMX IN of the second slave unit, etc. until all units

are connected in a chain.

3.5 DMX ADDRESSING

To enter the DMX mode, follow these steps:

• Press the MENU button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select Connect, then press the ENTER button to enter the

next menu.

• Press the UP/DOWN button to scroll through the menu, select DMX Address and press the ENTER key.

• Press the arrow keys to select the desired value (001 ~ 512).

• Press the ENTER key to conrm the setting.

• Press the MENU button repeatedly to exit the menu and save changes.

To able to operate the MOSAICO with a light controller, adjust the DMX start address for the rst a DMX

channel. If the address 33 on the controller is provided for controlling the function of the rst DMX chan-

nel, adjust the start address 33 on the MOSAICO. The other functions of the light eect panel are then

automatically assigned to the addresses shown in the table on the following page.

An example with the start address 33 is shown in g.5.

3.6 DMX MODE

The MOSAICO has 3 DMX channel congurations which can be accessed from the control panel.

• Press the MENU button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select Connect, then press the ENTER button to enter the

next menu.

• Press the UP/DOWN button to scroll through the menu, select DMX Mode and press the ENTER button to

enter the next menu.

• Use the UP/DOWN button to select the desired DMX channel conguration (12 CH, 14 CH,16 CH, 19 CH) then

press the ENTER button to conrm your choice.

• Press the MENU button repeatedly to exit the menu and save changes.

NOTE: the 16 CH mode records and edits scenes directly from DMX.

3.7 WIRELESS

• To enter the Wireless mode proceed in the following mode:

• Press the MENU button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select Connect, then press the ENTER button to enter the

next menu.

• Select the Wireless function using the UP/DOWN buttons, then press the ENTER button.

• To activate the Receive function, use the UP/DOWN buttons and select the On option.

• Press the ENTER button to conrm the selection.

• Press the MENU button to go back or wait a few seconds to exit the setup menu.

NOTE - Once you have performed these steps, you must synchronize with any WiFi unit with which you

want to communicate by pressing the sync button on it. At this point connect the DMX console to the

WiFi unit to open the communication with the MOSAICO.

• To reset the unit, select the Receive Reset function using the UP/DOWN buttons, press the ENTER button

MOSAICO

12

DMX512 Controller

. . . . . . . . . . . .

Fig.5 - Example 12 DMX channels conguration

DMX Address: 33 DMX Address: 69DMX Address: 45 DMX Address: 57

Number

DMX channels

Address of

start (example)

Address of

start (example)

Next possible start address

for unit n ° 1

Next possible start address

for unit n ° 2

Next possible start address

for unit n ° 3

12 33 33-44 45 57 69

14 33 33-46 47 61 75

16 33 33-48 49 65 81

3.8 SCREEN

You can change the following parameters related to the display, following the same procedure:

• Press the ENTER button to access the main menu.

• Press the UP / DOWN keys to scroll the menu, select Set Up, then press the ENTER button to enter the

next menu.

• Press UP / DOWN to scroll through the menu, then select Screen, and press the ENTER button to enter

the next menu.

• Press UP / DOWN to scroll through the menu, and then select one of the following settings for the dis-

play and press the ENTER key to display it.

- Back Light: Backlight display. This feature allows you to automatically turn o the backlight after a

until the display shows Connect, then select Receive Reset using the UP/DOWN buttons, then press the

ENTER button.

• To activate the mode use the UP / DOWN keys and select the Yes option.

• Press the ENTER button to conrm the selection.

• Press the MENU button to go back or wait a few seconds to exit the setup menu.

• To activate the Wireless to DMX function, use the UP / DOWN buttons to press the ENTER button until the

display shows Connect, then select Wireless to DMX, then press the ENTER button.

• To activate the mode use the UP/DOWN buttons and select the Yes option.

• Press the ENTER button to conrm the selection.

• Press the MENU button to go back or wait a few seconds to exit the setup menu.

13

MOSAICO

specied time that you can set using the arrow buttons. To have the display always on select On or

choose another value to turn o the display after the amount of time you choose.

- Flip Display: Orientation of the display. This function allows you to rotate the display 180° to get a

better view of the display when the unit is hanging upside down. Select Yes to activate or No to dis-

able this function.

- Warn Cue - Warning of error. Use the arrow keys to select O or On depending on whether or not the

display shows error warnings.

- Key Lock: Lock keys. With this function, you can lock the buttons on the control panel. If this function

is activated, the keys are automatically locked. To disable or temporarily disable the key lock func-

tion, press the buttons in the following order to regain access to menu commands: UP, DOWN, UP,

DOWN, ENTER. Select Yes to activate or No to disable.

• Press the ENTER button to conrm your choice.

• Press the MENU button repeatedly to exit the menu and save changes.

3.9 FIXTURE SETTINGS

You can change the parameters for the device by following these steps:

• Press the button MENU to enter the menu mode.

• Use the buttons UP/DOWN to select Set Up. Press the button ENTER to conrm.

• Use the buttons UP/DOWN to select Fixture. Press the button ENTER to conrm.

• Press the buttons UP/DOWN to select the desired option and press the button ENTER to conrm:

- Fan Mode - Fan speed. Select the desired fan speed Auto, High through the button UP/ DOWN.

- Temperature unit. Select Temperature unit function and then choose Celsius / Fahrenheit measurement unit

then press the ENTER button to conrm the selection.

• Press repeatedly the button MENU to return the menu mode.

3.10 AUTO TEST

Allow checking the proper functioning of the unit. Start the automatic test in the following way:

• Press the button MENU to enter the menu mode.

• Use the buttons UP/DOWN to select Set Up. Press the button ENTER to conrm.

• Press the buttons UP/DOWN to select the Auto Test and press ENTER to conrm.

• To conrm and start the automatic test press the ENTER button.

3.11 MANUAL TEST

It allows to do adjustments on the eects through commands panel to obtain a perfect balance between

the projectors.

• Press the button MENU to enter the menu mode.

• Press the buttons UP/DOWN to select Set Up. Then press the button ENTER.

• Press the buttons UP/DOWN to select the Manual Test. Then press the button ENTER.

• Select the eect you want change (Shutter, Dimmer, Color1, Color2, Gobo, RGobo, PrismRot, Frost, Focus, Zoom,

Animation, RAnimation). Then press the button ENTER to conrm.

• Use the directional buttons to calibrate the eect setting a value between 0 - 255. Then press the button

ENTER to conrm.

• Press repeatedly the button MENU to return the menu mode.

3.12 ADVANCED

It is possible to modify the following parameters following the same procedure:

MOSAICO

14

• Press the MENU button to access the main menu.

• Press the UP/DOWN button to scroll through the menu, select Advanced, then press the ENTER button

to enter the next menu.

• Press the UP/DOWN button to select one o the following parametres:

- Reset - To start a preset program to restore the selected function (All, Color 1, Color 2, Gobo, Prism , Frost,

Focus, Zoom, Animation).

- Adjust - To allows you to change all parameters. Insert the password "050" to enter. Select the desired

function (Color1 Oset, Color2 Oset, Gobo Oset, RGobo Oset, Prism Oset, RPrism Oset, Frost Oset, Focus Oset,

Zoom Oset, Animation Oset) and the choose the value (0 ~ 255).

- Factory Reload - To reset the unit. Select Yes or No and select ENTER to conrm.

• Press the ENTER button to conrm the selection and wait for the selected function to be restored.

• Press the MENU button repeatedly to exit the menu and to save the changes made.

3.13 INFORMATION ON THE DEVICE

To view all the information on the device, proceed as follows:

• Press the MENU button to access the main menu. Press the UP/DOWN button to select Information, then

press the ENTER button to access the next menu.

• Press the UP/DOWN button to scroll through the menu, then select one of the following information

and press the ENTER button to display it.

- Fixture Time - To view the operating time of the projector.

- Temperature - To view the temperature of the device in °C/°F on the display.

- Fans Speed - to view on the display the fan speed present near the lamp.

- Software Version - To view the rmware version will show on the display.

- UID - To view the identication ID for the RDM control.

• Press the MENU button repeatedly to exit the menu and to save the changes made.

3.14 OPERATIONS IN AUTOMATIC MODE

Play Show

The unit independently runs through its show. Before you send an automatic program you need to set the

drive as Master/Alone:

• Press the MENU button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select Stand Alone, then press the ENTER button to enter

the next menu.

• Press the UP/DOWN button to scroll through the menu, select Play and press the ENTER button to enter

the next menu.

• Press the UP/DOWN button to scroll through the menu, select Show and press ENTER to conrm your

choice.

• Press the UP/DOWN button to select the mode of operation: Show 1, Show 2, Show 3.

• Press the ENTER button to conrm your choice.

• Press the MENU button repeatedly to exit the menu and save changes.

The unit will go into automatic mode by executing the program automatically.

Play Chase

The function Chase lets you choose the automatic program to actually run.

• Press the MENU button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the Stand Alone, then press the ENTER button to

enter the next menu.

15

MOSAICO

• Press the UP/DOWN button to scroll through the menu, select Play and press the ENTER button to enter

the next menu.

• Press the UP/DOWN button to scroll through the menu, select Chase and press the ENTER button to

enter the next menu.

• Press the UP/DOWN button to scroll through the menu, then select Chase 1 ~ Chase 8 and press ENTER

to conrm.

• Press the MENU button repeatedly to exit the menu and save changes.

Play Scenes

The function Scenes lets you choose the scene to actually run.

• Press the MENU button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select Stand Alone, then press the ENTER button to enter

the next menu.

• Press the UP/DOWN button to scroll through the menu, select Play and press the ENTER button to enter

the next menu.

• Press the UP/DOWN button to scroll through the menu, select Scenes and press the ENTER button to

enter the next menu.

• Press the UP/DOWN button to scroll through the menu, then select Scene 1 ~ Scene 32 and press ENTER

to conrm.

• Press the MENU button repeatedly to exit the menu and save changes.

Edit Show

The function Edit Show allows you to create individual scenes to be included in the Chase Step.

• Press the MENU button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select Stand Alone, then press the ENTER button to enter

the next menu.

• Press the UP/DOWN button to scroll through the menu, select Edit Show and press the ENTER button to

enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select Show 1/Show 2/Show 3, then press the

ENTER button to conrm.

• Press the UP/DOWN button to scroll through the menu, select Chase 1 ~ Chase 8, then press the ENTER

button to conrm.

• Press the UP/DOWN button to change the value of the function, then press the ENTER button to

conrm.

• Press the MENU button repeatedly to exit the menu and save changes.

Edit Chase

The function Edit Chase allows you to create automatic pre-programmed show.

The automatic programs Chase1 ~ Chase8. Each Chase can be composed of 1 ~ 16 step that can be congured

through the following procedure:

• Press the MENU button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select Stand Alone, then press the ENTER button to enter

the next menu.

• Press the UP/DOWN button to scroll through the menu, select Edit Chases and press the ENTER button

to enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select Edit Chase 1 ~ Edit Chase 8, then press the

ENTER button to conrm.

MOSAICO

16

• Press the UP/DOWN button to select the Step 01 ~ Step 16, and press ENTER to conrm.

• Press the UP/DOWN button to select the Scene 1 ~ 32 you want to set for the Step chosen, and then press

ENTER to conrm.

• Press the MENU button repeatedly to exit the menu and save changes.

Edit Scenes

The function Edit Scenes allows you to create individual scenes to be included in the Chase Step.

• Press the MENU button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select Stand Alone, then press the ENTER button to enter

the next menu.

• Press the UP/DOWN button to scroll through the menu, select Edit Scenes and press the ENTER button

to enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select Edit Scene 1 ~ Edit Scene 32, then press the

ENTER button to conrm.

• Then choose the desired function: New / Edit Scene or Copy Scene.

• Press the UP/DOWN button to select the desired function you want to edit (Control, Dimmer, etc.), Then

press the ENTER button to conrm.

• Press the UP/DOWN button to change the value of the function, then press the ENTER button to

conrm.

• Press the MENU button repeatedly to exit the menu and save changes.

Scenes Record

The Scenes Record function allows the recording of MOSAICO scenes through the console on which the x-

ture was stored in Scene Record, capable of driving the beacon functions expressed in DMX.

• Press the MENU button to access the main menu.

• Press the UP/DOWN button to scroll through the menu, select Stand Alone, then press the ENTER button

to enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select Scenes Record and press the ENTER button

to enter the next menu.

• Press the UP/DOWN button to select the scene to edit in the automatic program, then press the ENTER

button to conrm. After pushing ENTER button, MOSAICO will wait for the conrm.

• From the DMX console, change the parameters of the MOSAICO based on the scene to be created.

• After creating the scene, press ENTER on the MOSAICO (the message STORED will appear).

• Press the MENU button repeatedly to exit the menu and save changes.

Slave Setup

The function Slave Setup allows you to execute automatic pre-programmed show set on the master

projector.

• Press the MENU button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select Stand Alone, then press the ENTER button to enter

the next menu.

• Press the UP/DOWN button to scroll through the menu, select Slave Setup and press the ENTER button

to enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select Edit Scene 1 ~ Edit Scene 32, then press the

ENTER button to conrm.

• Press the UP/DOWN button to select the desired function you want to edit (RGobo, Focus, Zoom), Then

press the ENTER button to conrm.

17

MOSAICO

• Press the UP/DOWN button to change the value of the function, then press the ENTER button to

conrm.

• Press the MENU button repeatedly to exit the menu and save changes.

NOTE: if the Slave units have to do the same operation as the MASTER, during a recording, the values of

Focus, Zoom and RGobo will not be stored. These values must be adjusted manually on the Slave units, via this

section.

Scenes Time

The Scenes Time function allows you to set the input, duration and output times of each single scene.

• Press the ENTER key to access the main menu.

• Press the UP / DOWN button to scroll through the menu, select Stand Alone, then press the ENTER button

to access the next menu.

• Press the UP / DOWN button to select Scenes Time and press the ENTER button to access the next menu.

• Press the UP / DOWN button to select Scene 01 Time ~ Scene 32 Time, then press the ENTER button.

• Press the UP / DOWN button to change the following times, then press the ENTER button to conrm:

- Fade in Time - scene entry time.

- Hold Time - time duration of the scene.

- Fade Out Time - time out of the scene.

Press the MENU key several times to exit the menu and to save the changes made.

Move blackout

The Move Blackout function allows you not to display the scroll between one scene and another; any kind of

change between a scene and the next occurs “in the dark”.

• Press the ENTER key to access the main menu.

• Press the UP / DOWN button to scroll through the menu, select Stand Alone, then press the ENTER button

to access the next menu.

• Press the UP / DOWN button to select Move Blackout and press the ENTER button to access the next menu.

• Press the UP / DOWN button to select On or O then press the ENTER button.

• Press the MENU key several times to exit the menu and to save the changes made.

When the projector is in Stand Alone it turns out to be MASTER, as well as if you enter or connect the projec-

tor to the DMX. When you exit the menu or disconnect the DMX connection, the projector restarts the

show execution from the last scene interrupted by these two actions.

MOSAICO

18

3.15 DMX CONTROL

12 CH 14 CH 16 CH 19 CH

SCENES

RECORD

FUNCTION

DMX

Value

1 1 1 1 1

SHUTTER

Shutter closed

No function (shutter open)

Strobe eect slow to fast

No function (shutter open)

Pulse-eect in sequences

No function (shutter open)

Random strobe eect slow to fast

No function (shutter open)

000 - 031

032 - 063

064 - 095

096 - 127

128 - 159

160 - 191

192 - 223

224 - 255

2 2 2 2 2

DIMMER

Dimmer (close to open) 000 - 255

3

DIMMER FINE

Dimmer (close to open) 000 - 255

3 3 3 4 3

COLOR WHEEL 1

Indexed

Open

Open+DARK RED

DARK RED

DARK RED + LIGHT ORANGE

LIGHT ORANGE

LIGHT ORANGE + YELLOW

YELLOW

YELLOW + GREEN

GREEN

GREEN + UV

UV

UV + MAGENTA

MAGENTA

MAGENTA + DARK BLUE

DARK BLUE

DARK BLUE+Open

Forward Spin

Fast to slow

Stop Rotation

Stop

Reverse Spin

Slow to fast

Continuous

Positioning from 1 to 15

000 - 003

004 - 007

008 - 011

012 - 015

016 - 019

020 - 023

024 - 027

028 - 031

032 - 035

036 - 039

040 - 043

044 - 047

048 - 051

052 - 055

056 - 059

060 - 063

064 - 094

095 - 096

097 - 127

128 - 255

4 4 4 5 4

COLOR WHEEL 2

Indexed

Open

Open+CTO

CTO

CTO + JADE

JADE

JADE + CTB

CTB

CTB + PINK

PINK

000 - 003

004 - 007

008 - 011

012 - 015

016 - 019

020 - 023

024 - 027

028 - 031

032 - 035

La pagina si sta caricando...

ProLights MOSAICO Manuale utente

ProLights MOSAICO Manuale utente

in altre lingue

Documenti correlati