ProLights JETSPOT4Z Manuale utente

USER MANUAL

MANUALE UTENTE

EN - IT

SPOT MOVING-HEAD

JETSPOT4Z

reproduced in any form or by any means for any commercial use.

In order to improve the quality of products, Music&Lights S.r.l. reserves the right to modify the

characteristics stated in this instruction manual at any time and without prior notice.

All revisions and updates are available in the ‘manuals’ section on site www.musiclights.it

REV.04-12/18

3

JETSPOT4Z

Packing content

• JETSPOT4Z

• Power cable

• Mount bracket

• User manual

TABLE OF

CONTENTS

Safety

General instructionsGeneral instructions

Warnings and installation precautionsWarnings and installation precautions

1 Introduction

1. 1 Description 1. 1 Description

1. 2 Technical specications1. 2 Technical specications

1. 3 Operating elements and connections1. 3 Operating elements and connections

2 Installation

2. 1 Mounting2. 1 Mounting

3 Functions and settings

3. 1 Operation3. 1 Operation

3. 2 Basic3. 2 Basic

3. 3 Menu structure3. 3 Menu structure

3. 4 Linking3. 4 Linking

3. 5 DMX address3. 5 DMX address

3. 6 DMX mode3. 6 DMX mode

3. 7 DMX addressing 3. 7 DMX addressing

3. 8 DMX control3. 8 DMX control

3. 9 Colors and gobos3. 9 Colors and gobos

3. 10 Movement3. 10 Movement

3. 11 Screen3. 11 Screen

3. 12 Fan mode3. 12 Fan mode

3. 13 Temperature3. 13 Temperature

3. 14 Auto and Manual test3. 14 Auto and Manual test

3. 15 Reset 3. 15 Reset

3. 16 Adjust3. 16 Adjust

3. 17 Factory Reload3. 17 Factory Reload

3. 18 Fixture info3. 18 Fixture info

3. 19 Master/Slave3. 19 Master/Slave

3. 20 Sequence3. 20 Sequence

3. 21 Mode Speed3. 21 Mode Speed

3. 22 Connection of the DMX line 3. 22 Connection of the DMX line

3. 23 Construction of the DMX termination 3. 23 Construction of the DMX termination

4 Maintenance

4. 1 Maintenance and cleaning the unit4. 1 Maintenance and cleaning the unit

4. 2 Fuse replacement4. 2 Fuse replacement

4. 3 Trouble shooting4. 3 Trouble shooting

2

3

6

8

9

10

12

14

17

19

20

21

22

23

24

25

JETSPOT4Z

4

WARNING! Before carrying out any operations with the unit, carefully read this instruction

manual and keep it with cure for future reference. It contains important information about

the installation, usage and maintenance of the unit.

SAFETY

General instruction

• The products referred to in this manual conform to the European Community Directives and are there-

fore marked with

.

• The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.

Never make any modications on the unit not described in this instruction manual, otherwise you will

risk an electric shock.

• Connection must be made to a power supply system tted with ecient earthing (Class I appliance ac-

cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units

from indirect contact and/or shorting to earth by using appropriately sized residual current devices.

• The connection to the main network of electric distribution must be carried out by a qualied electrical

installer. Check that the main frequency and voltage correspond to those for which the unit is designed

as given on the electrical data label.

• This unit is not for home use, only professional applications.

• Never use the xture under the following conditions:

- in places wet;

- in places subject to vibrations or bumps;

- in places with an ambient temperature of over 45°C.

• Make certain that no inammable liquids, water or metal objects enter the xture.

• Do not dismantle or modify the xture.

• All work must always be carried out by qualied technical personnel. Contact the nearest sales point for

an inspection or contact the manufacturer directly.

• If the unit is to be put out of operation denitively, take it to a local recycling

plant for a disposal which is not harmful to the environment.

Warnings and installation precautions

• If this device will be operated in any way dierent to the one described in this manual, it may suer

damage and the guarantee becomes void. Furthermore, any other operation may lead to dangers like

short circuit, burns, electric shock, etc.

• Before starting any maintenance work or cleaning the projector, cut o power from the main supply.

• Always additionally secure the projector with the safety rope. When carrying out any work, always com-

ply scrupulously with all the regulations (particularly regarding safety) currently in force in the country

in which the xture’s being used.

• For inside use only. Not designed for outside use.

• The minimum distance between the xture and surrounding walls must be more than 50 cm and the

air vents at the housing must not be covered in any case.

• Install the xture in a well ventilated place.

• Keep any inammable material at a safe distance from the xture.

• The maximum temperature that can be reached on the external surface of the tting, in a thermally

steady state, is high. After power o, please cool down over 15 minutes.

• Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent

that their eectiveness is impaired.

• The lamp (LED) shall be changed if it has become damaged or thermally deformed.

• Never look directly at the light beam. Please note that fast changes in lighting, e. g. ashing light, may

trigger epileptic seizures in photosensitive persons or persons with epilepsy.

• This product was designed and built strictly for the use indicated in this documentation. Any other use,

not expressly indicated here, could compromise the good condition/operation of the product and/or

be a source of danger.

• We decline any liability deriving from improper use of the product.

5

JETSPOT4Z

- 1 - INTRODUCTION

1.1 DESCRIPTION

JETSPOT4Z is a 180 W 6.800 K LED spotlight designed to replace a 700 W discharge xture in theatres,

concert halls and a host of other venues. The compact size allows for the use of this luminaire in venues

with low ceilings without resorting to zoom. Its custom optical system delivers a consistent output with a

at-eld and crisp gobo projection right through the massive 8° to 40° zoom range.

1.2 TECHNICAL SPECIFICATIONS

LIGHT SOURCE

• Source: 180W high-power white LED

• CT: 6.800K

• CRI: 68

• Luminous ux: 7’518lm

• Lux: (8°) 25’200 lx - (40°) 3’250lx @3 m

• Lux: (8°) 2’268 lx - (40°) 292lx @10 m

• Source life expectancy: 50.000 h

OPTICS

• Zoom: 8 - 40° motorised linear zoom

• Lens type: high-quality glass lens optics

• Focus: motorised

COLOUR SYSTEM

• Colour mixing: CMY colour system on 3 gradually fading colour wheels

• CTC: on wheel 2500 K and 3200 K + CTB

• Colour wheel: 6 dichroic lters + open on 3 independent colour wheels

DYNAMIC EFFECTS

• Rotating gobos: 7 rotating gobos + open, interchangeable, indexing

• Gobo size: outer: 24,2 mm - image: 20 mm - thickness: 1,1 mm

• Fixed gobos: 8 xed gobos + open

• Circular prism: 3f with bi-directional rotation, indexing

• Frost: linear 0 - 100% frost lter

• Iris: 5 - 100% motorised linear iris

• Auto mode: built-in programs with execution speed adjustment

BODY

• Pan angle: 540°

• Tilt angle: 270°

• Pan/Tilt resolution: 8 / 16 bit

• Feedback: automatic repositioning after accidental movement

• Body: aluminium structure with hi-resistance polycarbonate cover

• Body colour: black

CONTROL

• Protocols: DMX512, RDM

JETSPOT4Z

6

• DMX channels: 23 / 25 / 27channel

• RDM: RDM ready for xture remote monitor and settings

• Display: black TFT high resolution display

• Firmware upgrade: yes, via USB - DMX interface (UPBOX1) not included

• Master/Slave: for synchronized operation of more units linked in a chain

ELECTRONICS

• Dimmer: linear 0 ~ 100% electronic dimmer

• Strobe / shutter: 1 - 30 Hz, electronic

• Battery backup: battery backup for user operation without connecting to the main power

• Operating temperature: -10° ~ +45°

• Flicker: icker free operation

ELECTRICAL

• Power supply: 100-240 V – 50/60 Hz

• Power consumption (at 230 V): 250W

• Power consumption (at 120 V): 252W

• Output (at 230 V): 14 units on a single power line

• Output (at 120 V): 8 units on a single power line

PHYSICAL

• Cooling: forced air with low noise fan

• Sospension and xing: any position with quick-lock omega brackets

• Pan / tilt lock: pan / tilt locking for transportation and maintenance

• Signal connection: Amphenol XLR 3p + 5p IN/OUT connectors

• Power connection: Neutrik powerCON IN/OUT connectors

• IP rating: 20

• Dimensions (WxHxD): 332x544x230mm

• Weight: 18,6kg

Fig.1Technical drawing

7

JETSPOT4Z

Fig.2

1.3 OPERATING ELEMENTS AND CONNECTIONS

1. MOVING HEAD

2. ROTARY ARM

3. CONTROL PANEL with TFT dis-

play and 4 button used to access

the control panel functions and

manage them.

4. LED INDICATOR

5. DMX OUT (5-pole XLR): 1 =

ground, 2 = DMX-, 3 = DMX+, 4

N/C, 5 N/C

6. DMX OUT ( 3-pole XLR): 1 =

ground, 2 = DMX -, 3 = DMX +

7. DMX IN (5-pole XLR): 1 = ground,

2 = DMX-, 3 = DMX+, 4 N/C, 5

N/C

8. DMX IN (3-pole XLR): 1 = ground,

2 = DMX -, 3 = DMX +

9. MAIN FUSE HOLDER: replace

a burnt-out fuse by one of the

same type only.

10. POWER OUT: (PowerCON OUT)

to connect multiple units in se-

ries.

11. POWER IN (PowerCON IN):

for connection to a socket

(100-240V~/50-60Hz) via the

supplied mains cable.

View A

View B

7

8

10

9

11

5

6

34

B

A

2

1

JETSPOT4Z

8

- 2 - INSTALLATION

2.1 MOUNTING

The JETSPOT4Z may be set up on a solid and even surface. By means of the xing facilities of the baseplate,

the unit can also be mounted upside down to a cross arm. The base plate is shown in g.3. For xing, stable

mounting clips are required. According to the gure, the bolts of the brackets are placed into the openings

provided in the base plate and turned clockwise until they lock (to the stop). Always ensure that the unit

is rmly xed to avoid vibration and slipping while operating. The mounting place must be of sucient

stability and be able to support a weight of 10 times of the unit’s weight. When carrying out any installa-

tion, always comply scrupulously with all the regulations (particularly regarding safety) currently in force

in the country in which the xture’s being used. Always additionally secure the projector with the safety

rope from falling down. For this purpose, fasten the safety rope at a suitable position so that the maximum

fall of the projector will be 20 cm.

Fig.3

SAFETY

CABLE

OMEGA

BRACKETS

9

JETSPOT4Z

- 3 - FUNCTIONS AND SETTINGS

3.1 OPERATION

Connect the supplied main cable to a socket (100-240V~/50-60Hz). The unit will run built-in program to

reset all motors to their home position. Shortly after that the JETSPOT4Z is ready for operation. To switch

o, disconnect the mains plug from the socket. For a more convenient operation it is recommended to

connect the unit to a socket which can be switched on and o via light switch.

3.2 BASIC

The control panel of JETSPOT4Z has a display and 4 buttons for the complete programming and manage-

ment of the projector menu (g.4).

Fig.4 - Functions of the buttons

UP

DOWN MENU ENTER

Increases the value

displayed or passes to

the previous item in a

menu

Decreases the value

displayed or passes to

the next item in the

menu

To enter in the main

menù or to return to the

top level

Conrms the displayed

value, or activates the

displayed function, or

enters the successive

menu

JETSPOT4Z

10

3.3 MENU STRUCTURE

MENU

1

CONNECT

ð

DMX Address

ð

Value (1-512) Default: 1

DMX Mode

ð

Basic 27CH

Basic 25CH

Basic 23CH

Default: 25CH

Wireless

ð

Receive On/O

Receive Reset

Wireless To DMX

ð

YES/NO

Default :O

Default :No

Default :Yes

2 SET UP

ð

Movement

ð

Pan Reverse

Tilt Reverse

Pan Feedback

Tilt Feedback

ð

YES/NO

Default: No

Default: Yes

Screen

ð

Backlight

ð

ON

10s

20s

30s

Default: 10s

Flip Display

ð

NO/YES/AUTO Default: No

DMX Led

ð

OFF/ON Default: O

Warn Cue

ð

ON/OFF Default: On

Key Lock

ð

YES/NO Default: No

Fixture

ð

Fan mode

ð

Auto/High/Silent Default: Auto

Temperature unit

ð

C°/F° Default: °C

LED Frequency

ð

600Hz

1200 Hz

2000 Hz

4000 Hz

6000 Hz

25KHz

Default: 1200Hz

Auto Test

ð

Auto Test

Manual Test

ð

Pan

Pan Fine

Tilt

Tilt Fine

P/T Speed

Dimmer

Shutter

Color1

Color2

Color3

Cyan

Magenta

Yellow

Gobo1

RGobo1

Gobo2

Prism Rot

Focus

Zoom

Frost

Iris

ð

Value (000-255) for

each function

Default: Tilt=128

Dimmer=255

Shutter = 255

11

JETSPOT4Z

3 ADVANCED

ð

Reset

ð

All

Pan

Tilt

Cyan&Color1

Magenta&Color2

Yellow&Color3

Gobo1

Gobo2

Prism

Focus

Zoom

Frost

Iris

ð

Adjust

ð

Pan Oset

Tilt Oset

Cyan Oset

Magenta Oset

Yellow Oset

Color1 Oset

Color2 Oset

Color3 Oset

Gobo1 Oset

RGobo1 Oset

Gobo2 Oset

Prism Oset

Focus Oset

Zoom Oset

Frost Oset

Iris Oset

Value (000-255) for each

function

ð

Factory Reload

ð

YES/NO

4 INFORMATION

ð

Fixture Time

ð

0-9999

Default: 0

Temperature 58 °C

Fans Speed **%

Software Ver.

ð

DISP- V0.1

CTR1-XY- V0.1

CTR2-MOTOR-V0.1

CTR3-MOTOR-V0.1

CTR4-MOTOR-V0.1

UID 15D0021C****

5 STAND ALONE

ð

Play

ð

Master/Slave

ð

Master

Slave

Default: Slave

Sequence

ð

Show 1

Show 2

Show 3

Show 4

Default: Show 1

Speed

ð

Value (001-100%) Default: 100

JETSPOT4Z

12

3.4 LINKING

Several units may be interconnected in order to control all further slave units to the same eect of the

master unit.

1. Connect the DMX OUT of the master unit via 3/5-pole XLR cable to the DMX IN of the rst slave unit.

2. Connect the DMX OUT of the rst slave unit to the DMX IN of the second slave unit, etc. until all units

are connected in a chain.

3.5 DMX ADDRESS

To enter the DMX mode, follow these steps:

• Press the ENTER button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the Connect icon, then press the ENTER button to

enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select the Address and press the ENTER key.

• Press the arrow keys to select the desired value (001-512).

• Press the ENTER key to conrm the setting.

• Press the MENU button repeatedly to exit the menu and save changes.

3.6 DMX MODE

The JETSPOT4Z has more DMX channel congurations which can be accessed from the control panel.

• Press the ENTER button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the Connect icon, then press the ENTER button to

enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select DMX Mode and press the ENTER button to

enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select the mode and press ENTER to conrm

your choice.

• Press the MENU button repeatedly to exit the menu and save changes.

The unit is equipped with 3/5-pole XLR connections.

3.7 DMX ADDRESSING

For operation via light control unit with DMX512 protocol, is sucient connect the controller to JET-

SPOT4Z. To able to operate the JETSPOT4Zwith a light controller, adjust the DMX start address for the rst

a DMX channel. If e. g. address 33 on the controller is provided for controlling the function of the rst DMX

channel, adjust the start address 33 on the JETSPOT4Z. The other functions of the light eect panel are

then automatically assigned to the following addresses.

An example with the start address 33 is shown below

Number of

DMX channels

Start address

(example)

DMX address

occupied

Next possible start address

for unit n ° 1

Next possible start address

for unit n ° 2

Next possible start address

for unit n ° 3

23 33 33-56 57 80 103

25 33 33-58 59 84 109

27 33 33-60 61 88 115

13

JETSPOT4Z

Fig.6 - Example 23 DMX channels conguration

DMX Address: 103DMX Address: 57DMX Address: 33 DMX Address: 80

. . . . . . . . . . . .

DMX512 Controller

JETSPOT4Z

14

3.8 DMX CONTROL

FUNCTION

DMX

Value

27 ch 25 ch 23 ch

1 1 1 PAN 000 - 255

2 2 2 PAN Fine 000 - 255

3 3 2 TILT 000 - 255

4 4 4 TILT Fine 000 - 255

5 5 5 PAN/TILT Speed 000 - 255

6 6 6 DIMMER 000 - 255

7 7 DIMMER Fine 000 - 255

8 8 7

SHUTTER

Shutter closed

No function (shutter open)

Shutter eect slow to fast

No function (shutter open)

Pulse-eect in sequences

No function (shutter open)

Random strobe eect slow to fast

No function (shutter open)

000 - 031

032 - 063

064 - 095

096 - 127

128 - 159

160 - 191

192 - 223

224 - 255

9

COLOR Mode

Color wheels standard (default)

Color wheels move continues

000 - 127

128 - 255

10 9 8

COLOR1 (wheels standard)

Open

Color1-1(UV)

Color1-1 and Color1-2(UV and BLU)

Color1-2(BLU)

000 - 020

021 - 040

041 - 060

061 - 255

COLOR1 (wheels move continues)

Move from Open to Color1-2(BLU) continues

000 - 255

11 10 9

COLOR2 (wheels standard)

Open

Color2-1(ORANGE)

Color2-1 and Color2-2(ORANGE and RED)

Color2-2(RED)

000 - 020

021 - 040

041 - 060

061 - 255

COLOR2 (wheels move continues)

Move from Open to Color2-2(RED) continues

000 - 255

12 11 10

COLOR3 (wheels standard)

Open

Color3-1(COLOR TEMPERATURE ORANGE FILTER)

Color3-1 and Color3-2(COLOR TEMPERATURE ORANGE FILTER and GREEN)

Color3-2(GREEN)

000 - 020

021 - 040

041 - 060

061 - 255

COLOR3 (wheels move continues)

Move from Open to Color3-2(GREEN) continues

000 - 255

13 12 11

CYAN

0~100% 000 - 255

14 13 12

MAGENTA

0~100% 000 - 255

15 14 13

YELLOW

0~100% 000 - 255

15

JETSPOT4Z

FUNCTION

DMX

Value

27 ch 25 ch 23 ch

16 15 14

ROTATING GOBO WHEEL

Open

Position 1

Position 2

Position 3

Position 4

Position 5

Position 6

Position 7

Position 1 Shaking slow to fast

Position 2 Shaking slow to fast

Position 3 Shaking slow to fast

Position 4 Shaking slow to fast

Position 5 Shaking slow to fast

Position 6 Shaking slow to fast

Position 7 Shaking slow to fast

Fast to Slow(Forward Spin)

Stop (Stop Rotation)

Slow to Fast(Revers Spin)

000 - 005

006 - 010

011 - 015

016 - 020

021- 025

026 - 030

031 - 035

036 - 040

041 -055

056 - 070

071 - 085

086 - 100

101 - 115

116 - 130

131 - 145

146 - 199

200 - 201

202 - 255

17 16 15

GOBO ROTATION

Positioning from 0 - 360 degrees (Indexing)

Fast to Slaw

Stop

Slow to Fast

000 -191

192 - 221

222 - 225

226 - 255

18

GOBO ROTATION FINE

Positioning (Indexing Fine) 000 - 255

19 17 16

FIXED GOBO

Open

Position 1

Position 2

Position 3

Position 4

Position 5

Position 6

Position 7

Position 8

Position 1 Shaking slow to fast

Position 2 Shaking slow to fast

Position 3 Shaking slow to fast

Position 4 Shaking slow to fast

Position 5 Shaking slow to fast

Position 6 Shaking slow to fast

Position 7 Shaking slow to fast

Position 8 Shaking slow to fast

Fast to Slaw (Forward Spin)

Stop (Stop Rotation)

Slow to Fast (Revers Spin)

000 - 005

006 - 009

010 - 013

014 - 017

018 - 021

022 - 025

026 - 029

030 - 033

034 - 037

038 - 051

052 - 065

066 - 079

080 - 093

094 - 107

108 - 121

122 - 135

136 - 149

150 - 201

202 - 203

204 - 255

JETSPOT4Z

16

FUNCTION

DMX

Value

27 ch 25 ch 23 ch

20 18

PRISM

Prism O

Prism Insert

000 - 127

128 - 255

21 19 17

PRISM ROT

Prism O

Index

Fast to Slow

Stop

Slow to Fast

000 - 000

001 - 127

128 - 189

190 - 193

194 - 255

22 20 18

FROST

Frost 0->100% 000-255

23 21 19

FOCUS

Focus 000-255

24 22 20

FOCUS FINE

Focus Fine

000-255

25 23 21

ZOOM

Zoom 000-255

26 24 22

IRIS

Iris 0->100%

Jump Open Fast to Slow

Jump Close Slow to Fast

000 - 191

192 - 223

224 - 255

27 25 23

CONTROL

No function

Enable blackout while Pan/Tilt move (Hold 3 Second)

Disable blackout while Pan/Tilt move (Hold 3 Second)

Enable blackout while color change (Hold 3 Second)

Disable blackout while color change (Hold 3 Second)

Enable blackout while gobo change (Hold 3 Second)

Disable blackout while gobo change (Hold 3 Second)

Pan Reset (Hold 3 Second)

Tilt Reset (Hold 3 Second)

Cyan&Color1 Reset (Hold 3 Second)

Magenta&Color2 Reset (Hold 3 Second)

Yellow&Color3 Reset (Hold 3 Second)

Gobo1 Reset (Hold 3 Second)

Gobo2 Reset (Hold 3 Second)

Prism Reset (Hold 3 Second)

Focus Reset (Hold 3 Second)

Zoom Reset (Hold 3 Second)

Frost Reset (Hold 3 Second)

Iris Reset (Hold 3 Second)

No function

Reset all (Hold 3 Second)

No function

000 - 039

040 - 049

050 - 059

060 - 069

070 - 079

080 - 089

090 - 099

100 - 109

110 - 119

120 - 129

130 - 139

140 - 149

150 - 159

160 - 169

170 - 179

180 - 189

190 - 199

200 - 209

210 - 219

220 - 229

230 - 239

240 - 255

17

JETSPOT4Z

3.9 COLOR WHEEL e GOBOS

BlueUV

COLOR 1

COLOR 2

COLOR 3

Cyan

RedOrange

Magenta

Green

Orange

lter

Yellow

JETSPOT4Z

18

1

2

3

4

5

6

7

ROTATING GOBO

Ø112

Ø

83

Ø

45

Ø18

Ø12

x3

17.8

21.3

3-Ø3

x3-Ø2.5

1

2

3

45

6

7

8

FIXED GOBO

19

JETSPOT4Z

3.10 MOVEMENT

• Press the ENTER button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the Set Up icon, then press the ENTER button to

enter the next menu.

• Press the UP/DOWN button to scroll through the menu, then select Movement and press the ENTER but-

ton to enter the next menu.

• Use the UP/DOWN button to select the option proposed and press the ENTER button to conrm the

setting.

- Pan Reverse - Pan rotation in the opposite direction. Select NO to deactivate the function (normal set-

ting); YES to activate the function (Pan Reverse).

- Tilt Reverse - Used for reversing tilt movement. Select NO to deactivate the function (normal setting);

YES to activate the function (Tilt Reverse).

- Pan/Tilt Feedbacks - Reorganization Pan/Tilt position after rolling away. Select NO to deactivate or YES

to activate the function.

• Press the ENTER button to conrm your choice.

• Press the MENU button repeatedly to exit the menu and save changes.

3.11 SCREEN

You can change the following parameters related to the display, following the same procedure:

• Press the ENTER button to access the main menu.

• Press the UP / DOWN keys to scroll the menu, select the Set Up icon, then press the ENTER button to

enter the next menu.

• Press UP / DOWN to scroll through the menu, then select Screen, and press the ENTER button to enter

the next menu.

• Press UP / DOWN to scroll through the menu, and then select one of the following settings for the dis-

play and press the ENTER key to display it.

- Back Light - Backlight display Auto O. This feature allows you to automatically turn o the backlight

after a specied time that you can set using the arrow buttons. To have the display always on select

Always On or choose another value to turn o the display after the amount of time you choose.

- Flip Display - Orientation of the display. This function allows you to rotate the display 180° to get a

better view of the display when the unit is hanging upside down. Select YES to activate or NO to dis-

able this function.

- DMX Led - LED indicators ON / OFF. This function, if it is ON, allows the POWER and DMX indicators to

light up, if the OFF, LED indicators are o.

- Warn Cue - Error warning. Use the directional keys to select OFF or ON depending on Whether you

want the display to show error alerts.

- Key Lock - Lock keys. With this function, you can lock the buttons on the control panel. If this function

is activated, the keys are automatically locked. To disable or temporarily disable the key lock func-

tion, press the buttons in the following order to regain access to menu commands: UP, DOWN, LEFT,

RIGHT, ENTER. Select YES to activate or NO to disable.

• Press the ENTER button to conrm your choice.

• Press the MENU button repeatedly to exit the menu and save changes.

3.12 FAN MODE

Select this function to set the fans operation mode:

• Press the ENTER button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the Set Up icon, then press the ENTER button to

enter the next menu.

JETSPOT4Z

20

• Press the UP/DOWN button to scroll through the menu, select Set Up icon, and press the ENTER button

to enter the next menu.

• Press the UP/DOWN button to scroll through the menu, and then select Fan Mode and press ENTER to

conrm.

• Press the UP/DOWN button to select Auto Speed/High Speed/Silent, press the ENTER button to conrm your

choice.

• Press the MENU button repeatedly to exit the menu and save changes

3.13 TEMPERATURE

Select this function to set the temperature unit measurement shown on the display:

• Press the ENTER button to access the main menu.

• Press the UP/DOWN to scroll through the menu, select the Set Up icon, then press the ENTER button to

enter the next menu.

• Press the UP/DOWN to scroll through the menu, select Fixture, and press the ENTER button to enter the

next menu.

• Press the UP/DOWN button to scroll through the menu, select Temperature °C/°F and press ENTER to con-

rm.

• Press the UP/DOWN button to select the unit of measure Celsius/Fahrenheit and press the ENTER button

to conrm your choice.

• Press the MENU button repeatedly to exit the menu and save changes.

3.14 AUTO AND MANUAL TEST

With this menu, you can test all functions; with auto the moving head will start an auto test, with manual

you can choose each channel/function to test.

3.15 RESET FUNCTIONS

You can start a preset program to restore the selected function:

• Press the ENTER button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the Advanced icon, then press the ENTER button

to enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select Reset and press the ENTER button to

enter the next menu.

• Press the UP/DOWN button to scroll through the menu, then select the function you wish to reset be-

tween All, Pan, Tilt, Cyan&Color1, Magenta&Color2, Yellow&Color3, Gobo1, Gobo2, Prism, Focus, Zoom, Frost, Iris.

• Press the ENTER button to conrm your choice and wait for the recovery of the selected function.

3.16 ADJUST

Adjusts the lamp. This function allows you to modify all the parameters of the lamp: Pan Oset, Tilt Oset,

Cyan Oset, Magenta Oset, Yellow Oset, Color1 Oset, Color2 Oset, Color3 Oset, Gobo1 Oset, RGobo1 Oset, Gobo2

Oset, Prism Oset, Focus Oset, Zoom Oset, Frost Oset, Iris Oset.

• Press the ENTER button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the Advanced icon, then press the ENTER button

to enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select Adjust and press the ENTER button to

enter the next menu.

• Press the UP/DOWN button to select one of the parameters and press ENTER to edit the value (000-255)

La pagina si sta caricando...

ProLights JETSPOT4Z Manuale utente

ProLights JETSPOT4Z Manuale utente

in altre lingue

Documenti correlati

Altri documenti