Star Trac SPINNER BLADE ION 7220 Series Installation & Owner's Manual
- Tipo
- Installation & Owner's Manual
Table Of Contents
Introduction 4
Manufacturer 4
Warranty 4
Customer Support 4
Safety Instructions 4
Precautions 5
Safeguards 12
Assembly and Setup 13
Assembly Instructions 14
Testing Bike 26
Instructions 27
Seat Adjustment 27
Handlebar Adjustments 28
Pedal Strap Adjustment 28
Resistance Control 29
User Information 30
Bike Setup 30
Training Information 31
Dismounting Bike 31
Spinner Blade Ion Computer 32
Orientation 33
Getting Started 34
Maintenance Mode 37
Pairing ANT+ Devices 40
Why Maintenance 41
Maintenance 42
Moving and Leveling 42
Preventive Maintenance 42
Daily Maintenance 42
Weekly Maintenance 43
Monthly Maintenance 43
Inspection and Adjustment 43
Frame Care 44
Parts Replacement 44
Adjustments 45
Frequently Asked Questions 46
3 | SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER’S MANUAL
Introduction
This manual will acquaint you with the assembly, operation and maintenance of your Spinner® indoor cycling bike.
This manual provides information and instructions for the following Spinner indoor cycling bike models:
• 7220 Series - Spinner® Blade ION manufactured by STAR TRAC®
Be sure to read and follow the information and instructions for your specific model before assembly, using or servicing your indoor cycling
bike.
Manufacturer
STAR TRAC
4400 NE 77th Avenue, Suite 300
Vancouver, WA 98662
Telephone: (800) 228-6635, (714) 669-1660
Fax: (714) 508-3303
http://www.startrac.com
Warranty
Frame is covered for ten (10) years from the date of purchase for structural failure. Additionally, the Spinner® Blade ION Frame is
warranted for five (5) years from the date of purchase against build up and propagation of rust. Flywheel Assembly, Brake Knob
Assembly, Handlebar Assembly, Seat Post, and Foot Adjustments are covered for three (3) years from the date of purchase. Handle Bar
Post Plastic Sleeve, Seat Post Plastic Sleeve, Bottom Bracket Assembly, Seat Saddle Assembly, and Pop-Pin Assembly, are covered for
two (2) years for the date of purchase. Pedals, Chain, Brake Pad Assembly, Rubber Frame Guard, Brass Brake Nut and remaining parts
are covered for one (1) year from the date of purchase. An advance warranty replacement kit of wear items is included, consisting of: one
(1) Brake Pad and two (2) Pedal Straps.
Customer Support
If any items need replacement contact the Star Trac Customer Support Department at 800-503-1221 or 714-669-1660.
Safety Instructions
This chapter includes precautions and fitness safeguards for the installation and use of the SPINNER Blade ION manufactured by
STAR TRAC. Please read this chapter carefully before installing or using your equipment.
Safety instructions are provided in the following languages (in the order shown):
• English
• Dutch
• French
• Italian
• Portuguese
• Spanish
• Swedish
• Chinese
• Japanese
4 | SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER’S MANUAL
Precautions
These safety notes are directed to you as the owner of the Spinner® Blade ION manufactured by Star Trac. Please train all your users
and fitness staff to follow these safety instructions.
DO
DO NOT
• Do encourage each of your users to discuss their health
program or fitness regimen with a healthcare professional.
• Do not let unsupervised children operate the bike
• Do stop operating your bike if you feel dizzy or faint.
• Do not use without proper athletic shoes or cycling shoes.
• Do perform regular preventative maintenance.
• Do not use in rainy weather outdoors, or in an enclosed pool
environment.
• Do exercise slowly until you reach a level of comfort.
• Do not drop or insert any object, hands, or feet into any
opening or within the area of the flywheel.
• Do use the bike only for its intended use, as described in this
manual.
• Do not attempt to remove any shrouds or modify the bike.
WARNING
Your Star Trac Spinner Blade ION is designed for aerobic exercise in a commercial or consumer environment.
Please check with your physician prior to beginning any exercise program.
Do not push yourself to excess. Stop if you are feeling faint, dizzy, or exhausted. Use common sense when biking.
Read the owner’s manual in its entirety before operating the bike.
Failure to obey this warning can result in injury or death.
STAR TRAC® and the Star Trac logo are registered trademarks of Core Industries.
Spin®, Spinner®, Spinning® and the Spinning logo are registered trademarks of Mad Dogg Athletics, Inc.
Smart Release™ is a registered trademark of Nautilus, Inc.
SPD is a registered trademark of Shimano American Corporation
5 | SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER’S MANUAL
AVERTISSEMENT
Le Spinner Blade ION manufactured by Star Trac est conçu pour l'exercice aérobique dans un
environnement commercial ou privé.
Veuillez consulter un médecin avant de commencer tout programme d'exercice.
Ne vous poussez pas au-delà de vos limites. Arrêtez-vous si vous vous sentez faible, étourdi ou
épuisé. Faites preuve de bon sens lorsque vous vous entraînez.
Lisez le guide de l'utilisateur en entier avant d'utiliser le bike.
Le non-respect de ces avertissements peut se traduire par des blessures, voire la mort.
VOORZORGSMAATREGELEN
Deze veiligheidsaantekeningen zijn aan u gericht als eigenaar van de Spinner® Blade ION manufactured by Star Trac. Gelieve uw
gebruikers en uw per- soneel voor conditietraining volledig bekend te maken met deze veiligheidsinstructies.
Doe het volgende:
■ Moedig elk van uw gebruikers aan hun gezondheidspro-
gramma of conditietherapie met een professioneel uit de
gezondheidszorg te bespreken.
■ Stop het gebruik van uw bike als u zich duizelig of
een flauwte voelt.
■ Voer regelmatig preventief onderhoud uit.
■ Oefen langzaam totdat u een comfortniveau
heeft bereikt.
■ Gebruik de bike alleen voor zijn bedoelde gebruik,
zoals in deze handleiding staat beschreven.
Doe het volgende NIET:
■ Laat kinderen zonder toezicht de bike niet bedienen.
■ Niet zonder gymschoenen gebruiken.
■ Niet buiten bij regenachtig weer gebruiken, of in dichte
ruimte met een zwembad.
■ Laat geen enkel voorwerp in de bike vallen en steek uw
handen of voeten in geen enkele opening van of
onder uw Bike.
■ Probeer geen omhulsels te verwijderen of uw bike te
wijzigen.
WAARSCHUWING
Uw Spinner Blade ION manufactured by Star Trac is ontworpen voor aërobische oefeningen in een
commerciële of gebruiker- somgeving.
Zie uw arts vóór het beginnen van een oefenprogramma.
Dwing uzelf niet tot buitensporige oefeningen. Stop als u zich duizelig, uitgeput of een flauwte voelt.
Lees de gebruikershandleiding helemaal en aandachtig door alvorens uw bike te bedienen. Nalaten
deze waarschuwing op te volgen kan letsel of overlijden tot gevolg hebben.
PRÉCAUTIONS
Ces consignes de sécurités s'adressent aux propriétaires du Spinner® Blade ION manufactured by Star Trac. Veuillez instruire tous
vos utilisateurs et instructeurs à suivre ces consignes.
À Faire
■ Encouragez tous les utilisateurs à consulter un médecin
au sujet de leur programme de fitness ou régime
d'exercice.
■ Cessez d'utiliser le bike en cas d'étourdissement ou de
faiblesse.
■ Exécutez régulièrement la maintenance préventive.
■ Commencez l'exercice lentement jusqu'à ce que
vous atteignez un niveau confortable.
■ Utilisez le bike uniquement de la manière prévue,
telle que décrite dans ce manuel.
À éviter
■ Ne laissez pas des enfants utiliser le bike sans sur-
veillance.
■ Ne l'utilisez pas sans porter de chaussures d'athlétisme.
■ Ne l'utilisez pas en extérieur lors de temps pluvieux, ni
en intérieur dans une salle de piscine.
■ Évitez de laisser tomber tout objet ou d'introduire les
mains ou pieds dans toute ouverture ou en-dessous du
Bike.
■ Ne tentez pas de retirer tout carter de protection ni de
modifier le bike.
6 | SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER’S MANUAL
VORSICHTSMASSNAHMEN
Die folgenden Vorsichtsmaßnahmen richten sich an Sie als Besitzer des Spinner® Blade ION manufactured by Star Trac. Bitte
schulen Sie alle Ihre
Benutzer und Ihr Fitness-Personal in der Beachtung dieser Sicherheitsvorschriften.
Gebote
■ Legen Sie jedem Ihrer Benutzer nahe, sein
Gesundheits- oder Fitnessprogramm mit einem medi-
zinischen Fachmann zu besprechen.
■ Beenden Sie den Betrieb Ihres bike, wenn Sie sich
schwindelig oder schwach fühlen.
■ Führen Sie regelmäßige vorbeugende Wartungsmaßnahmen
durch.
■ Trainieren Sie langsam, bis Sie eine gewisse
Komfortzone erreichen.
■ Verwenden Sie den bike nur zum vorgesehenen, in
dieser Anleitung beschriebenen Zweck.
Verbote
■ Lassen Sie den bike nicht von unbeaufsichtigten
Kindern in Betrieb nehmen.
■ Benutzen Sie das Gerät nicht ohne Sportschuhe.
■ Benutzen Sie das Gerät bei regnerischen
Witterungsbedingungen nicht im Freien und nicht in
einer geschlossenen Schwimmbadumgebung.
■ Lassen Sie keine Gegenstände in irgendwelche Öffnun-
gen oder unter den Bike fallen und halten Sie Hände
und Füße von diesen Bereichen fern.
■ Unternehmen Sie keinen Versuch, irgendwelche
Abdeckungen zu entfernen oder den bike zu modi-
fizieren.
ACHTUNG
Der Spinner Blade ION manufactured by Star Trac ist für aerobische Übungen in einer kommerziellen oder
Verbraucherumgebung vorgesehen.
Bitte holen Sie vor Aufnahme eines jeden Trainingsprogramms den Rat Ihres Arztes ein.
Trainieren Sie nicht übertrieben hart. Hören Sie auf, wenn Sie ein Schwäche-, Schwindel- oder
Erschöpfungsgefühl verspüren. Lassen Sie sich beim Schritttraining von Ihrer Vernunft leiten.
Lesen Sie vor Inbetriebnahme Ihres bike die Bedienungsanleitung vollständig durch.
Ein Missachten dieses Achtungshinweises kann Verletzungen oder den Tod zur Folge haben.
PRECAUZIONI
Queste note precauzionali sono dirette a voi, come proprietario dello Spinner® Blade ION manufactured by Star Trac. Siete pregati di
istruire i vostri uten- ti e il vostro personale all'osservanza di queste precauzioni.
Da Fare
■ Incoraggiate i vostri utenti a discutere il loro programma
di salute o di fitness con uno specialista dell'healthcare.
■ Interrompete l'uso dello bike se avete giramenti di
testa o se vi sentite mancare.
■ Eseguite periodicamente servizi di manutenzione.
■ Utilizzate lo bike soltanto per l'uso è a cui è destina- to,
come descritto nel manuale.
Da Non Fare
■ Non consentite a bambini di usare lo bike senza la
supervisione di un adulto.
■ Non utilizzate lo Bike senza scarpe atletiche.
■ Non utilizzate lo Bike all'esterno in condizioni piovose o
in un ambiente con piscina interna.
■ Non lasciate cadere oggetti sullo bike e non inserite
oggetti, mani o piedi in qualsiasi apertura esterna
o sotto lo Bike.
■ Non cercate di rimuovere le coperture o di modificare lo
Bike.
AVVERTENZE
Lo Spinner Blade ION manufactured by Star Trac è stato realizzato per esercizi di aerobica in un ambiente pubblico
privato adeguato.
Prima di iniziare un programma di esercizio fisico, consultate il vostro medico.
Non eccedete i vostri limiti. Fermatevi se vi sentite mancare, se avete giramenti di testa o se vi sentite
esausti. Usate buon senso nell'utilizzo dell'attrezzatura.
Leggete il Manuale dell'utente interamente prima di utilizzare lo bike.
La mancata osservanza di queste avvertenze può comportare lesioni gravi o morte.
SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER’S MANUAL | 7
PRECAUÇÕES
Estas notas de segurança destinam-se a você, proprietário do Spinner® Blade ION manufactured by Star Trac. Treine todos os
usuários e o pessoal da academia para que sigam estas instruções de segurança.
O que fazer
■ Incentive todos os usuários a discutirem seu programa
de saúde ou sistema de condicionamento físico com um
profissional da área de saúde.
■ Pare o funcionamento do bike se sentir tontura ou
vertigem.
■ Efetue a manutenção preventiva regular.
■ Faça exercícios lentamente até atingir um grau de con-
forto.
■ Use o bike apenas de acordo com a finalidade para
que se destina, conforme descrito neste manual.
O que não fazer
■ Não deixe crianças sem supervisão operarem o bike.
■ Não use sem os sapatos esportivos apropriados.
■ Não utilize em ambientes externos quando o tempo
estiver chuvoso, nem em um ambiente fechado de pisci-
na interna.
■ Não deixe cair nem insira nenhum objeto, mãos ou pés
em qualquer abertura ou sob o bike.
■ Não tente remover nenhum degrau nem modificar seu
Bike.
ADVERTÊNCIA
Seu Spinner Blade ION manufactured by Star Trac foi projetado para exercícios aeróbicos em um ambiente
comercial ou próprio do consumidor.
Consulte seu médico antes de começar qualquer programa de exercícios.
Não se esforce demais. Pare se sentir tontura, vertigem ou exaustão. Tenha bom senso ao fazer o exercício.
Leia todo o Manual do Proprietário antes de operar o seu bike.
Deixar de observar esta advertência pode resultar em ferimentos ou morte.
PRECAUCIONES
Estas notas de seguridad están dirigidas a usted como el dueño de Spinner® Blade ION manufactured by Star Trac. Por favor instruya
a todos sus usuar- ios y personal de entrenamiento para que sigan estas instrucciones de seguridad.
Lo que se debe hacer
■ Dígale a cada uno de sus usuarios que discuta su pro-
grama de salud o régimen de ejercicio con un
profe- sional de la salud.
■ Deje de operar su bike si se siente mareado o como
que va a desmayarse.
■ Lleve a cabo mantenimiento preventivo a intervalos reg-
ulares.
■ Haga ejercicio lentamente hasta que alcance un nivel en
el que se sienta cómodo.
■ Utilice el bike solamente para lo que fue diseñado,
como se describe en este manual.
Lo que no se debe hacer
■ No permita que los niños operen su bike sin super-
visión.
■ No lo use sin zapatos atléticos.
■ No lo utilice afuera en la lluvia ni en un ambiente cerra-
do donde haya una piscina.
■ No lo deje caer ni inserte objetos, manos o pies
en ninguna apertura de su Bike ni debajo de él.
■ No intente quitar ninguna cubierta o recubrimiento ni
modificar su bike.
ADVERTENCIA
Su Spinner Blade ION manufactured by Star Trac está diseñado para el ejercicio aerobic en un ambiente
commercial o de consume.
Por favor consulte con su médico antes de iniciar cualquier programma de ejercicio.
No haga un esfuerzo excesivo. Deténgase si se siento mareado, exhaust o como si fuera a desmayarse. Use
su sentido común al hacer ejercico.
Lea completamente el Manual del dueño antes de operar su bike.
El no cumplir con esta advertenicia puedo resultar en una lesión o en la muerte.
8 | SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER’S MANUAL
Spinner Blade ION manufactured by Star Trac är avsedd för aerobisk träning i kommersiella eller konsumentinriktade
miljöer.
Konsultera din läkare innan du inleder något träningsprogram.
Driv inte dig själv för hårt. Sluta om du känner dig yr, svimfärdig eller utmattad. Använd bike med sunt förnuft.
Läs igenom hela handboken innan du använder bike.
Underlåtelse att iaktta dessa varningar kan medföra skada eller dödsfall.
FÖRSIKTIGHETSÅTGÄRDER
Dessa säkerhetsanmärkningar är riktade till dig i egenskap av ägare av Spinner® Blade ION manufactured by Star Trac. Var god
utbilda alla användare och all personal att följa dessa säkerhetsanvisningar.
Man ska
■ uppmuntra alla användare att konsultera sitt hälso-
progam eller sin träningsregim med en läkare.
■ sluta använda bike om man känner sig yr eller svim-
färdig.
■ utföra regelbundet underhåll i förebyggande syfte.
■ motionera långsamt tills man når en komfortnivå.
■ endast använda bike för dess avsedda användning,
enligt beskrivning i denna handbok.
Man ska inte
■ låta barn använda bike utan uppsikt.
■ använda bike utan sportskor.
■ använda bike utomhus i fuktigt väder eller i ett innes-
lutet bassängområde.
■ tappa in eller föra in något föremål, händer eller fötter i
någon öppning, eller under bike.
■ försöka att avlägsna några skyddskåpor eller att modi-
fiera Bike.
VARNINGAR
SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER’S MANUAL | 9
Safeguards
NCTIONS
The following fitness safeguards and operating precautions are directed to purchasers and users of Spinner® indoor cycling bikes.
Club Managers should ensure that members and fitness staff are trained to follow these same instructions. Failure to follow these
safeguards may result in injury or serious health risk.
• Ensure that adjustment knobs (seat height, seat fore-and-aft, and handlebar) are properly secured and do not interfere with
range of motion during exercise.
• Children under the age of 16 should not ride the Spinner bike. The bike mechanism and ergonomics are designed for adult
use only.
• Do not insert any object, hands or feet into any openings, or expose hands, arms or feet to the drive mechanism or other
potentially moving part of the bike.
• The maximum weight for individuals riding the Spinner bike should not exceed 350 pounds (159 kilograms).
• Spinner bikes have a weighted flywheel and a fixed gear. This means that in order to stop, you must gradually slow your
pedal strokes rather than stopping abruptly. If you do need to stop immediately, push down on the resistance knob. Do not
dismount the bike or remove your feet from the pedals until both the pedals and the flywheel have stopped completely.
Failure to comply may lead to loss of control and serious injury.
• After exercising, turn the resistance knob to increase resistance so the pedals will not rotate freely and potentially injure
someone.
• If at any time you feel dizzy or have difficulty breathing, gradually stop pedaling and carefully dismount the bike.
• Listen to your body, ride at your own pace and set your bike’s resistance at the level that feels right for you.
• Keep children and pets away from the bike whenever it's in use.
• Never turn the pedal crank arms by hand.
• Stay hydrated. Drink water throughout your ride as needed.
• Always keep some resistance on the flywheel.
• Stay in control by executing all core movements and hand positions at a slow pace before attempting to increase your
speed. Do not attempt to ride the bike in a standing position at a high RPM until you have practiced at slower speeds.
• Focus on form, posture and making smooth transitions between movements.
• Do not use the bike without proper footwear. Never operate the bike with bare feet.
• Never remove your feet from the pedals while still in motion. Prevent your feet from coming out of the toe clip or shoe cage
by keeping shoe laces tucked in and foot straps pulled snug around your shoe. If your foot does become disengaged, push
down on the resistance knob to stop the flywheel’s motion.
12 | SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER’S MANUAL
Assembly & Setup
Use the following procedures to unpack and assemble your SPINNER® Blade ION manufactured by Star Trac.
UNPACKING AND PARTS LIST
Position the shipping carton so the “Heavy End” logo is located at the bottom. Open the top of the carton and fold back all four flaps.
Carefully tilt the box forward so that the box may be lifted to expose the bike. Remove all parts from the shipping carton and foam
inserts, and verify that the following parts are included in your shipment:
Spinner Blade ION Parts List
Description
Qty.
Description
Qty.
Main Frame Assembly
1
M8x1.25x30mm Hex Head Bolt
2
Handlebar
1
8mm Split Lock Washer
2
Seat and Slider Assembly
1
8mm Plain Washer
2
Handlebar Post
1
Threaded Foot Plate
2
Lower Seat Post
1
Seat Adjustment Pop-Pin
1
Front Foot Strut
1
“Pull Prevent” Plastic Oval Cap
1
Pedals and Bolts (set of two; R and L)
2
Metal Oval Mounting Plate
1
Spinner Blade ION Console
1
M5x0.8x25mm Button Head Bolt
1
Load Sensor Plastic Block Covers Kit
1
M5x0.8x12mm Button Head Bolt
1
Tool Kit
1
Multi-Sized Open Wrench
1
Take time now to enter your Spinner Blade ION serial number in the space below (serial number is located on the bottom cross
member).
If parts are missing, or if you have any operational questions, please call Star Trac’s Service department at (800) 503-1221.
Have your serial number ready.
Serial No._____________________________________________
NOTE: If you are missing any of the parts listed above, inspect the packing material and the box for items that may have been
overlooked.
If parts are missing, or if you have any product questions, please call Star Trac’s Service Department at (800) 503-1221, please have
your Spinner’s serial number ready.
CAUTION: Damage to the bike during assembly is not covered as part of the limited Star Trac warranty. Take care not to drop or
lean the bike on the handle bar pop-pin. Carefully stand the bike up in the normal upright position on a stable surface so it will not tip
over during assembly.
SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER’S MANUAL | 13
ASSEMBLY INSTRUCTIONS
1. Unboxing the unit requires turning the sealed box
upside down to open the bottom flaps (Fig. 1).
Fig. 1
2. Return the opened box back to the upright position
(Fig. 2).
Fig. 2
3. Expose the packaged bike by pulling the box up
(Fig. 3).
Fig. 3
14 | SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER’S MANUAL
4. Remove handlebar & packaging (Fig. 4) from its center
location.
Fig 4.
5. Remove the hardware pack and seat from the foam
covering the front section of the bike frame (Fig. 5).
Fig. 5
6.
Tilt the packaged bike frame towards the heavy
flywheel and stand on its end (Fig. 6).
Fig 6.
SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER’S MANUAL | 15
7. Remove the foam packaging from the rear section of
the bike frame (Fig. 7).
Fig. 7
8. Locate the rear foot strut along with the corresponding
hardware that secures it to the bike frame (Fig. 8).
Hardware:
• M8 x 1.25 x 30mm Hex Head Bolt
• 8mm Split Lock Washer
• 8mm Plain Washer
• Threaded Foot Plate
Fig. 8
9.
Insert the threaded plate (Fig. 9) into the bottom section
of the rear foot bracket.
Fig. 9
16 | SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER’S MANUAL
10. Install the rear foot strut (Fig. 10) and tighten hardware
using the supplied multi sized open wrench.
Fig. 10
11. Stand the bike frame on the opposite end and place a
piece of foam or rag under the seat post frame section
(Fig. 11).
Fig. 11
12. Remove the foam covering the front of the bike frame
(Fig. 12).
Fig. 12
SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER’S MANUAL | 17
13. Locate the front foot strut along with the corresponding
hardware that secures it to the bike frame (Fig. 13).
Hardware:
• M8x1.25x30mm Hex Head Bolt
• 8mm Split Lock Washer
• 8mm Plain Washer
• Threaded Foot Plate
Fig. 13
14. Insert the threaded plate (Fig. 14) into the bottom
section of the front foot bracket.
Fig. 14
15. Install the front foot strut (Fig. 15) and tighten hardware
using the supplied multi sized open wrench.
Fig. 15
16. Return the bike to the upright position (Fig.16).
Fig. 16
18 | SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER’S MANUAL
17. Locate adjustable seat post and insert into the seat
tube on the bike frame (Fig. 17).
Fig. 17
18. Locate and install the seat height adjustment pop pin
onto the bike frame (Fig. 19). Use the multi sized open
wrench to tighten.
Fig. 19
19.
Attach the seat slider assembly onto the seat post by
pulling the small pull pin located at the underside of the
seat post and sliding into position (Fig. 18).
Fig. 18
20. Locate the Spin® badge (Fig. 20) at the front of the bike
frame.
Fig. 20
SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER’S MANUAL | 19
21.
Using a 2mm hex key, loosen the two button head cap
screws (Fig. 21) to expose the internal wiring and open
connections.
Fig. 21
22. Locate the handlebar height adjustment post with the
pre-inserted wire harness and socket head cap screw
at the lower section of the post (Fig. 22).
NOTE: Remove the socket head cap screw from the
lower section using a 4mm hex key.
Fig. 22
23. Insert the handlebar post into the front frame tube on
the bike (Fig. 23).
NOTE: Push the post down towards the lowest
possible position.
Fig. 23.
20 | SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER’S MANUAL
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
