Sony DSX-A410BT Manuale del proprietario

DSX-A410BT

4-697-418-36(1)

FM/MW/LW

Digital Media

Player

 

Operating Instructions

GB

Bedienungsanleitung

DE

Mode d’emploi

FR

Istruzioni per l’uso

IT

Manual de instrucciones

ES

 



RU

To cancel the demonstration (DEMO) display, see page 19.

For the connection/installation, see page 32.

Zum Deaktivieren der Demo-Anzeige (DEMO) schlagen Sie

bitte auf Seite 21 nach.

Informationen zum Anschluss und zur Installation finden Sie auf

Seite 37.

Pour annuler la démonstration (DEMO), reportez-vous à la

page 20.

Pour le raccordement/l’installation, reportez-vous à la page 35.

Per annullare la dimostrazione (DEMO), vedere pagina 20.

Per l’installazione e i collegamenti, consultare pagina 35.

Para cancelar la pantalla de demostración (DEMO), consulte

la página 20.

Para la conexión/instalación, consulte la página 35.

Для отмены демонстрации на дисплее (режим DEMO) см.

стр. 22.

  / .  . 38.

2GB

Made in Thailand

The nameplate indicating operating voltage, etc., is

located on the bottom of the chassis.

Hereby, Sony Corporation declares that this

equipment is in compliance with Directive

2014/53/EU.

The full text of the EU declaration of conformity is

available at the following internet address:

http://www.compliance.sony.de/

This equipment is intended to be used with the

approved version(s) of software that are indicated

in the EU Declaration of Conformity.

The software loaded on this equipment is verified

to comply with the essential requirements of the

Directive 2014/53/EU.

Software version: 1_

The software version can be checked in the

firmware setup item of the general setup menu.

Notice for customers: the following

information is only applicable to equipment

sold in countries applying EU Directives

This product has been manufactured by or on

behalf of Sony Corporation.

EU Importer: Sony Europe B.V.

Inquiries to the EU Importer or related to product

compliance in Europe should be sent to the

manufacturer’s authorized representative, Sony

Belgium, bijkantoor van Sony Europe B.V., Da

Vincilaan 7-D1, 1930 Zaventem, Belgium.

Disposal of waste batteries and

electrical and electronic

equipment (applicable in the

European Union and other

European countries with separate

collection systems)

This symbol on the product, the battery or on the

packaging indicates that the product and the

battery shall not be treated as household waste. On

certain batteries this symbol might be used in

combination with a chemical symbol. The chemical

symbols for mercury (Hg) or lead (Pb) are added if

the battery contains more than 0.0005% mercury or

0.004% lead. By ensuring these products and

batteries are disposed of correctly, you will help

prevent potentially negative consequences for the

environment and human health which could

otherwise be caused by inappropriate waste

handling. The recycling of the materials will help to

conserve natural resources.

In case of products that for safety, performance or

data integrity reasons require a permanent

connection with an incorporated battery, this

battery should be replaced by qualified service staff

only. To ensure that the battery and the electrical

and electronic equipment will be treated properly,

hand over these products at end-of-life to the

applicable collection point for the recycling of

electrical and electronic equipment. For all other

batteries, please view the section on how to

remove the battery from the product safely. Hand

the battery over to the applicable collection point

for the recycling of waste batteries. For more

detailed information about recycling of this product

or battery, please contact your local Civic Office,

your household waste disposal service or the shop

where you purchased the product or battery.

CAUTION

The following frequency 65 – 74 MHz range is not

allocated to sound broadcasting in the European

Common Allocations table and cannot be used in

Europe.

For safety, be sure to install this unit in the

dashboard of the car as the rear side of the unit

becomes hot during use.

For details, see “Connection/Installation”

(page 32).

3GB

Disclaimer regarding services offered by third

parties

Services offered by third parties may be changed,

suspended, or terminated without prior notice.

Sony does not bear any responsibility in these sorts

of situations.

Caution

IN NO EVENT SHALL SONY BE LIABLE FOR ANY

INCIDENTAL, INDIRECT OR CONSEQUENTIAL

DAMAGES OR OTHER DAMAGES INCLUDING,

WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF

REVENUE, LOSS OF DATA, LOSS OF USE OF THE

PRODUCT OR ANY ASSOCIATED EQUIPMENT,

DOWNTIME, AND PURCHASER’S TIME RELATED TO

OR ARISING OUT OF THE USE OF THIS PRODUCT, ITS

HARDWARE AND/OR ITS SOFTWARE.

Dear customer, this product includes a radio

transmitter.

According to UNECE Regulation no. 10, a vehicle

manufacturers may impose specific conditions for

installation of radio transmitters into vehicles.

Please check your vehicle operation manual or

contact the manufacturer of your vehicle or your

vehicle dealer, before you install this product into

your vehicle.

Emergency calls

This BLUETOOTH car handsfree and the electronic

device connected to the handsfree operate using

radio signals, cellular, and landline networks as well

as user-programmed function, which cannot

guarantee connection under all conditions.

Therefore do not rely solely upon any electronic

device for essential communications (such as

medical emergencies).

On BLUETOOTH communication

 Microwaves emitting from a BLUETOOTH device

may affect the operation of electronic medical

devices. Turn off this unit and other BLUETOOTH

devices in the following locations, as it may cause

an accident.

 where inflammable gas is present, in a hospital,

train, airplane, or petrol station

 near automatic doors or a fire alarm

 This unit supports security capabilities that

comply with the BLUETOOTH standard to provide

a secure connection when the BLUETOOTH

wireless technology is used, but security may not

be enough depending on the setting. Be careful

when communicating using BLUETOOTH wireless

technology.

 We do not take any responsibility for the leakage

of information during BLUETOOTH

communication.

If you have any questions or problems concerning

your unit that are not covered in this manual,

consult your nearest Sony dealer.

Warning if your car’s ignition has no ACC

position

Be sure to set the AUTO OFF function (page 19).

The unit will shut off completely and

automatically in the set time after the unit is

turned off, which prevents battery drain. If you

do not set the AUTO OFF function, press and hold

OFF until the display disappears each time you

turn the ignition off.

Important notice

4GB

Table of Contents

Guide to Parts and Controls . . . . . . . . . . . . . . . . . . . 5

Getting Started

Detaching the Front Panel . . . . . . . . . . . . . . . . . . . . 6

Resetting the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Checking the Battery Voltage . . . . . . . . . . . . . . . . . 7

Preparing a BLUETOOTH Device. . . . . . . . . . . . . . . . 8

Connecting a USB Device . . . . . . . . . . . . . . . . . . . . 10

Connecting Other Portable Audio Device . . . . . . . 11

Listening to the Radio

Listening to the Radio. . . . . . . . . . . . . . . . . . . . . . . 11

Using Radio Data System (RDS) . . . . . . . . . . . . . . . 12

Playback

Playing a USB Device . . . . . . . . . . . . . . . . . . . . . . . 13

Playing a BLUETOOTH Device. . . . . . . . . . . . . . . . . 13

Searching and Playing Tracks. . . . . . . . . . . . . . . . . 14

Handsfree Calling (via BLUETOOTH

only)

Receiving a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Making a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Available Operations during Call . . . . . . . . . . . . . . 16

Useful Functions

Sony | Music Center with iPhone/Android

smartphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Using Voice Recognition (Android smartphone

only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Using Siri Eyes Free . . . . . . . . . . . . . . . . . . . . . . . . . 18

Settings

Canceling the DEMO Mode . . . . . . . . . . . . . . . . . . 19

Basic Setting Operation . . . . . . . . . . . . . . . . . . . . . 19

General Setup (GENERAL) . . . . . . . . . . . . . . . . . . . 19

Sound Setup (SOUND) . . . . . . . . . . . . . . . . . . . . . . 20

Display Setup (DISPLAY). . . . . . . . . . . . . . . . . . . . . 21

BLUETOOTH Setup (BLUETOOTH) . . . . . . . . . . . . . 21

Sony | Music Center Setup (SONY APP) . . . . . . . . 22

Additional Information

Updating the Firmware . . . . . . . . . . . . . . . . . . . . . 22

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Connection/Installation

Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Parts List for Installation . . . . . . . . . . . . . . . . . . . . 32

Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

5GB

Guide to Parts and Controls

 Front panel release button

 SRC (source)

Turn on the power.

Change the source.

OFF

Press and hold for 1 second to turn the source

off and display the clock.

Press and hold for more than 2 seconds to turn

off the power and the display.

 Control dial

Rotate to adjust the volume.

PUSH ENTER

Enter the selected item.

Press SRC, rotate then press to change the

source (timeout in 2 seconds).

MENU

Open the setup menu.

VOICE (page 16, 18)

Press and hold for more than 2 seconds to

activate voice dial, voice recognition (Android™

smartphone only), or the Siri function (iPhone

only).

N-Mark

Touch the control dial with Android smartphone

to make BLUETOOTH connection.

 Display window

 / (SEEK –/+)

Tune in radio stations automatically. Press and

hold to tune manually.

/ (prev/next)

/ (fast-reverse/fast-forward)

 PTY (program type)

Select PTY in RDS.

(browse) (page 14)

Enter the browse mode during playback.

(Not available when [BT AUDIO] is selected, or a

USB device in Android mode or iPod is

connected.)

 CALL

Enter the call menu. Receive/end a call.

Press and hold more than 2 seconds to switch

the BLUETOOTH signal.

Main unit

6GB

 (back)

Return to the previous display.

MODE (page 11, 16)

 Receptor for the remote commander

 Number buttons (1 to 6)

Receive stored radio stations. Press and hold to

store stations.

ALBUM /

Skip an album for audio device. Press and hold

to skip albums continuously.

(Not available when a USB device in Android

mode or iPod is connected.)

(repeat)

(Not available when a USB device in Android

mode is connected.)

(shuffle)

(Not available when a USB device in Android

mode is connected.)

MIC (page 16)

 (play/pause)

 EXTRA BASS

Reinforce bass sound in synchronization with

the volume level. Press to change the EXTRA

BASS setting: [1], [2], [OFF].

 AUX input jack

 DSPL (display)

Press to change display items.

SCRL (scroll)

Press and hold to scroll a display item.

 USB port

 Microphone (inner panel)

In order for the handsfree function to work

properly, do not cover the microphone with

tape, etc.

Detaching the Front Panel

You can detach the front panel of this unit to

prevent theft.

1 Press and hold OFF  until the unit turns

off, press the front panel release button

, then pull the panel towards you to

remove.

Caution alarm

If you turn the ignition switch to the OFF position

without detaching the front panel, the caution

alarm will sound for a few seconds. The alarm will

only sound if the built-in amplifier is used.

Serial numbers

Make sure the serial numbers on the bottom of the

unit and the back of the front panel are matched

correctly. Otherwise you cannot make BLUETOOTH

pairing, connection and disconnection by NFC.

Getting Started

Attaching the front panel

7GB

Resetting the Unit

Before operating the unit for the first time, or after

replacing the car battery or changing connections,

you must reset the unit.

1 Press DSPL and (back)/MODE for

more than 2 seconds.

Note

Resetting the unit will erase the clock setting and some

stored contents.

Setting the area/region

After resetting the unit, the area/region setting

display appears.

1 Press ENTER while [SET AREA] is

displayed.

The area/region currently set appears.

2 Rotate the control dial to select [EUROPE]

or [RUSSIA], then press it.

3 Rotate the control dial to select [YES] or

[NO], then press it.

If the setting area/region is changed, the unit is

reset, then the clock is displayed.

This setting can be configured in the general setup

menu (page 19).

Setting the Clock

1 Press MENU, rotate the control dial to

select [GENERAL], then press it.

2 Rotate the control dial to select [SET

CLOCK], then press it.

3 Rotate the control dial to select

[MANUAL], then press it.

The hour indication flashes.

4 Rotate the control dial to set the hour

and minute.

To move the digital indication, press /

(SEEK –/+).

5 After setting the minute, press MENU.

The setup is complete and the clock starts.

To display the clock

Press DSPL.

To set the clock automatically

Select [AUTO <RDS>] in step 3.

Checking the Battery Voltage

You can check the current battery voltage. (Not

available while the source is off and the clock is

displayed.)

1 Press DSPL repeatedly until the battery

voltage display appears.

8GB

Preparing a BLUETOOTH Device

You can enjoy music, or perform handsfree calling

depending on the BLUETOOTH compatible device

such as a smartphone, cellular phone and audio

device (hereafter “BLUETOOTH device” if not

otherwise specified). For details on connecting,

refer to the operating instructions supplied with the

device.

Before connecting the device, turn down the

volume of this unit; otherwise, loud sound may

result.

By touching the control dial on the unit with an

NFC* compatible smartphone, the unit is paired and

connected with the smartphone automatically.

* NFC (Near Field Communication) is a technology

enabling short-range wireless communication

between various devices, such as mobile phones and

IC tags. Thanks to the NFC function, data

communication can be achieved easily just by

touching the relevant symbol or designated location

on NFC compatible devices.

For a smartphone with Android OS 4.0 or lower

installed, downloading the app “NFC Easy Connect”

available at Google Play™ is required. The app may

not be downloadable in some countries/regions.

1 Activate the NFC function on the

smartphone.

For details, refer to the operating instructions

supplied with the smartphone.

2 Touch the N-Mark part of the unit with

the N-Mark part of the smartphone.

Make sure that lights up on the display of the

unit.

To disconnect using NFC

Touch the N-Mark part of the unit with the N-Mark

part of the smartphone again.

Notes

 When making the connection, handle the

smartphone carefully to prevent scratches.

 One-touch connection is not possible when the unit is

already connected to another NFC compatible device.

In this case, disconnect the other device, and make

connection with the smartphone again.

When connecting a BLUETOOTH device for the first

time, mutual registration (called “pairing”) is

required. Pairing enables this unit and other devices

to recognize each other. This unit can connect two

BLUETOOTH devices (two cellular phones, or a

cellular phone and an audio device).

1 Place the BLUETOOTH device within 1 m

(3 ft) of this unit.

2 Press MENU, rotate the control dial to

select [BLUETOOTH], then press it.

3 Rotate the control dial to select [SET

PAIRING], then press it.

4 Rotate the control dial to select [SET

DEVICE 1]* or [SET DEVICE 2]*, then press

it.

flashes while the unit is in pairing standby

mode.

* [SET DEVICE 1] or [SET DEVICE 2] will be changed

to the paired device name after pairing is

complete.

5 Perform pairing on the BLUETOOTH

device so it detects this unit.

Connecting with a Smartphone using

One-touch connection (NFC)

Pairing and connecting with a

BLUETOOTH device

9GB

6 Select [DSX-XXXX] (your model name)

shown in the display of the BLUETOOTH

device.

If your model name does not appear, repeat

from step 2.

7 If passkey* input is required on the

BLUETOOTH device, input [0000].

* Passkey may be called “Passcode,” “PIN code,”

“PIN number” or “Password,” etc., depending on

the device.

When pairing is made, stays lit.

8 Select this unit on the BLUETOOTH device

to establish the BLUETOOTH connection.

or lights up when the connection is made.

Note

While connecting to a BLUETOOTH device, this unit

cannot be detected from another device. To enable

detection, enter the pairing mode and search for this

unit from another device.

To start playback

For details, see “Playing a BLUETOOTH Device”

(page 13).

To disconnect the paired device

Perform step 2 to 4 to disconnect after this unit and

the BLUETOOTH device are paired.

To use a paired device, connection with this unit is

required. Some paired devices will connect

automatically.

1 Press MENU, rotate the control dial to

select [BLUETOOTH], then press it.

2 Rotate the control dial to select [SET BT

SIGNL], then press it.

Make sure that lights up.

3 Activate the BLUETOOTH function on the

BLUETOOTH device.

4 Operate the BLUETOOTH device to

connect to this unit.

or lights up.

Icons in the display:

To connect the last-connected device from

this unit

Activate the BLUETOOTH function on the

BLUETOOTH device.

To connect with the audio device, press SRC

to select [BT AUDIO] and press  (play/

pause).

To connect with the cellular phone, press

CALL.

Note

While streaming BLUETOOTH audio, you cannot

connect from this unit to the cellular phone. Connect

from the cellular phone to this unit instead.

[0000]

Input passkey

Connecting with a paired BLUETOOTH

device

Lights up when handsfree calling is

available by enabling the HFP (Handsfree

Profile).

Lights up when the audio device is

playable by enabling the A2DP

(Advanced Audio Distribution Profile).

10GB

Tip

With BLUETOOTH signal on: when the ignition is turned

to on, this unit reconnects automatically to the last-

connected cellular phone.

When an iPhone/iPod with iOS5 or later installed is

connected to the USB port, the unit is paired and

connected with the iPhone/iPod automatically.

To enable BLUETOOTH Auto Pairing, make sure [SET

AUTOPAIR] in [BLUETOOTH] is set to [ON] (page 21).

1 Activate the BLUETOOTH function on the

iPhone/iPod.

2 Connect an iPhone/iPod to the USB port.

Make sure that lights up on the display of the

unit.

Notes

 BLUETOOTH Auto Pairing is not possible if the unit is

already connected to another BLUETOOTH device. In

this case, disconnect the other device, then connect

the iPhone/iPod again.

 If BLUETOOTH Auto Pairing is not established, see

“Preparing a BLUETOOTH Device” (page 8).

Connecting a USB Device

1 Turn down the volume on the unit.

2 Connect the USB device to the unit.

To connect an iPod/iPhone, use the USB

connection cable for iPod (not supplied).

Connecting with an iPhone/iPod

(BLUETOOTH Auto Pairing)

11GB

Connecting Other Portable

Audio Device

1 Turn off the portable audio device.

2 Turn down the volume on the unit.

3 Connect the portable audio device to the

AUX input jack (stereo mini jack) on the

unit with a connecting cord (not

supplied)*.

* Be sure to use a straight type plug.

4 Press SRC to select [AUX].

To match the volume level of the connected

device to other sources

Start playback of the portable audio device at a

moderate volume, and set your usual listening

volume on the unit.

Press MENU, then select [SOUND]  [SET AUX VOL]

(page 21).

Listening to the Radio

To listen to the radio, press SRC to select [TUNER].

1 Press MODE to change the band (FM1,

FM2, FM3, MW or LW).

2 Press MENU, rotate the control dial to

select [GENERAL], then press it.

3 Rotate the control dial to select [SET

BTM], then press it.

The unit stores stations in order of frequency on

the number buttons.

1 Press MODE to change the band (FM1,

FM2, FM3, MW or LW).

2 Perform tuning.

To tune manually

Press and hold / (SEEK –/+) to locate

the approximate frequency, then press /

 (SEEK –/+) repeatedly to finely adjust to the

desired frequency.

To tune automatically

Press / (SEEK –/+).

Scanning stops when the unit receives a station.

1 While receiving the station that you want

to store, press and hold a number button

(1 to 6) until [MEM] appears.

Listening to the Radio

Storing automatically (BTM)

Tuning

Storing manually

12GB

1 Select the band, then press a number

button (1 to 6).

Using Radio Data System (RDS)

AF continuously retunes the station to the strongest

signal in a network, and TA provides current traffic

information or traffic programs (TP) if received.

1 Press MENU, rotate the control dial to

select [GENERAL], then press it.

2 Rotate the control dial to select [SET AF/

TA], then press it.

3 Rotate the control dial to select [SET AF-

ON], [SET TA-ON], [SET AF/TA-ON] or [SET

AF/TA-OFF], then press it.

To store RDS stations with the AF and TA

setting

You can preset RDS stations along with an AF/TA

setting. Set AF/TA, then store the station with BTM

or manually. If you preset manually, you can also

preset non-RDS stations.

To receive emergency announcements

With AF or TA on, emergency announcements will

automatically interrupt the currently selected

source.

To adjust the volume level during a traffic

announcement

Level will be stored into memory for subsequent

traffic announcements, independently from the

regular volume level.

To stay with one regional program

(REGIONAL)

When the AF and REGIONAL functions are on, you

will not be switched to another regional station

with a stronger frequency. If you leave this regional

program’s reception area, set [SET REG-OFF] in

[GENERAL] during FM reception (page 20).

This function does not work in the UK and some

other areas.

Local Link function (UK only)

This function enables you to select other local

stations in the area, even if they are not stored on

your number buttons.

During FM reception, press a number button (1 to 6)

on which a local station is stored. Within 5 seconds,

press again a number button of the local station.

Repeat this procedure until the local station is

received.

1 Press PTY during FM reception.

2 Rotate the control dial until the desired

program type appears, then press it.

The unit starts to search for a station

broadcasting the selected program type.

Type of programs

Receiving the stored stations

Setting alternative frequencies (AF) and

traffic announcement (TA)

Selecting program types (PTY)

NEWS (News), AFFAIRS (Current Affairs), INFO

(Information), SPORT (Sports), EDUCATE

(Education), DRAMA (Drama), CULTURE (Culture),

SCIENCE (Science), VARIED (Varied), POP M (Pop

Music), ROCK M (Rock Music), EASY M (Easy

Listening), LIGHT M (Light classical), CLASSICS

(Serious classical), OTHER M (Other Music),

WEATHER (Weather), FINANCE (Finance),

CHILDREN (Children’s program), SOCIAL (Social

Affairs), RELIGION (Religion), PHONE IN (Phone In),

TRAVEL (Travel), LEISURE (Leisure), JAZZ (Jazz

Music), COUNTRY (Country Music), NATION M

(National Music), OLDIES (Oldies Music), FOLK M

(Folk Music), DOCUMENT (Documentary)

13GB

Playing a USB Device

In these Operating Instructions, “iPod” is used as a

general reference for the iPod functions on an iPod

and iPhone, unless otherwise specified by the text

or illustrations.

For details on the compatibility of your iPod, see

“About iPod” (page 23) or visit the support site on

the back cover.

AOA (Android Open Accessory) 2.0, MSC (Mass

Storage Class) and MTP (Media Transfer Protocol)

type USB devices* compliant with the USB standard

can be used. Depending on the USB device, the

Android mode or MSC/MTP mode can be selected

on the unit.

Some digital media players or Android

smartphones may require setting to MTP mode.

* e.g., a USB flash drive, digital media player,

Android smartphone

Notes

 For details on the compatibility of your USB device,

visit the support site on the back cover.

 Smartphones with Android OS 4.1 or higher installed

support Android Open Accessory 2.0 (AOA 2.0).

However, some smartphones may not fully support

AOA 2.0 even if Android OS 4.1 or higher is installed.

For details on the compatibility of your Android

smartphone, visit the support site on the back cover.

 Playback of the following files is not supported.

MP3/WMA/AAC/FLAC:

 copyright-protected files

 DRM (Digital Rights Management) files

 Multi-channel audio files

MP3/WMA/AAC:

 lossless compression files

Before making a connection, select the USB mode

(Android mode or MSC/MTP mode) depending on

the USB device (page 20).

1 Connect a USB device to the USB port

(page 10).

Playback starts.

If a device is already connected, to start

playback, press SRC to select [USB] ([IPD]

appears in the display when the iPod is

recognized).

2 Adjust the volume on this unit.

To stop playback

Press and hold OFF for 1 second.

To remove the device

Stop playback, then remove the device.

Caution for iPhone

When you connect an iPhone via USB, phone call

volume is controlled by the iPhone, not the unit. Do

not inadvertently increase the volume on the unit

during a call, as a sudden loud sound may result

when the call ends.

Playing a BLUETOOTH Device

You can play contents on a connected device that

supports BLUETOOTH A2DP (Advanced Audio

Distribution Profile).

1 Make BLUETOOTH connection with the

audio device (page 8).

To select the audio device, press MENU, then

select [BLUETOOTH]  [SET AUDIODEV]

(page 21).

2 Press SRC to select [BT AUDIO].

3 Operate the audio device to start

playback.

4 Adjust the volume on this unit.

Notes

 Depending on the audio device, information such as

title, track number/time and playback status may not

be displayed on this unit.

 Even if the source is changed on this unit, playback of

the audio device does not stop.

 [BT AUDIO] does not appear in the display while

running the “Sony | Music Center” application via the

BLUETOOTH function.

Playback

14GB

To match the volume level of the BLUETOOTH

device to other sources

Start playback of the BLUETOOTH audio device at a

moderate volume, and set your usual listening

volume on the unit.

Press MENU, then select [SOUND]  [SET BTA VOL]

(page 21).

Searching and Playing Tracks

Not available when a USB device in Android mode is

connected.

1 During playback, press (repeat) or

(shuffle) repeatedly to select the desired

play mode.

Playback in the selected play mode may take

time to start.

Available play modes differ depending on the

selected sound source.

Not available when a USB device in Android mode

or iPod is connected.

1 During USB playback, press (browse)*

to display the list of search categories.

When the track list appears, press (back)

repeatedly to display the desired search

category.

* During USB playback, press (browse) for more

than 2 seconds to directly return to the beginning

of the category list.

2 Rotate the control dial to select the

desired search category, then press it to

confirm.

3 Repeat step 2 to search the desired track.

Playback starts.

To exit the Quick-BrowZer mode

Press (browse).

Not available when a USB device in Android mode

or iPod is connected.

1 During USB playback, press (browse).

2 Press  (SEEK +).

3 Rotate the control dial to select the item.

The list is jumped in steps of 10% of the total

number of items.

4 Press ENTER to return to the Quick-

BrowZer mode.

The selected item appears.

5 Rotate the control dial to select the

desired item, then press it.

Playback starts.

Repeat play and shuffle play

Searching a track by name (Quick-

BrowZer™)

Searching by skipping items

(Jump mode)

15GB

To use a cellular phone, connect it with this unit.

You can connect two cellular phones to the unit. For

details, see “Preparing a BLUETOOTH Device”

(page 8).

Receiving a Call

1 Press CALL when a call is received with a

ringtone.

The phone call starts.

Note

The ringtone and talker’s voice are output from the

front speakers. To select the speakers for handsfree

calling, press MENU, then select [BLUETOOTH]  [SET

VOICE-OUT] (page 22).

To reject the call

Press and hold OFF for 1 second.

To end the call

Press CALL again.

Making a Call

You can make a call from the phonebook or call

history when a cellular phone supporting PBAP

(Phone Book Access Profile) is connected.

When two cellular phones are connected to the

unit, select either phone.

1 Press CALL.

When two cellular phones are connected to the

unit, rotate the control dial to select either

phone, then press it.

2 Rotate the control dial to select [PHONE

BOOK], then press it.

3 Rotate the control dial to select an initial

from the initial list, then press it.

4 Rotate the control dial to select a name

from the name list, then press it.

5 Rotate the control dial to select a

number from the number list, then press

it.

The phone call starts.

1 Press CALL.

When two cellular phones are connected to the

unit, rotate the control dial to select either

phone, then press it.

2 Rotate the control dial to select [RECENT

CALL], then press it.

A list of the call history appears.

3 Rotate the control dial to select a name

or phone number from the call history,

then press it.

The phone call starts.

1 Press CALL.

When two cellular phones are connected to the

unit, rotate the control dial to select either

phone, then press it.

2 Rotate the control dial to select [DIAL

NUMBER], then press it.

Handsfree Calling (via BLUETOOTH

only)

From the phonebook

From the call history

By phone number input

16GB

3 Rotate the control dial to enter the

phone number, and lastly select [ ]

(space), then press ENTER*.

The phone call starts.

* To move the digital indication, press /

(SEEK –/+).

Note

[_] appears instead of [#] on the display.

1 Press CALL.

When two cellular phones are connected to the

unit, rotate the control dial to select either

phone, then press it.

2 Rotate the control dial to select [REDIAL],

then press it.

The phone call starts.

You can make a call by saying the voice tag stored

in a connected cellular phone that has a voice

dialing function.

1 Press CALL.

When two cellular phones are connected to the

unit, rotate the control dial to select either

phone, then press it.

2 Rotate the control dial to select [VOICE

DIAL], then press it.

Alternatively, press and hold VOICE for more

than 2 seconds.

3 Say the voice tag stored on the cellular

phone.

Your voice is recognized, and the call is made.

To cancel voice dialing

Press VOICE.

Available Operations during

Call

To adjust the ringtone volume

Rotate the control dial while receiving a call.

To adjust the talker’s voice volume

Rotate the control dial during a call.

To adjust the volume for the other party (Mic

gain adjustment)

Press MIC.

Adjustable volume levels: [MIC-LOW], [MIC-MID],

[MIC-HI].

To reduce echo and noise (Echo Canceler/

Noise Canceler Mode)

Press and hold MIC.

Settable mode: [EC/NC-1], [EC/NC-2].

To switch between handsfree mode and

handheld mode

During a call, press MODE to switch the phone call

audio between the unit and cellular phone.

Note

Depending on the cellular phone, this operation may

not be available.

By redial

By voice tags

17GB

Sony | Music Center with

iPhone/Android smartphone

Downloading the latest version of “Sony | Music

Center” application is required from the App Store

for iPhone or from Google Play for Android

smartphone.

Notes

 For your safety, follow your local traffic laws and

regulations, and do not operate the application while

driving.

 “Sony | Music Center” is an app for controlling Sony

audio devices which are compatible with “Sony |

Music Center”, by your iPhone/Android smartphone.

 What you can control with “Sony | Music Center”

varies depending on the connected device.

 To make use of “Sony | Music Center” features, see

the details on your iPhone/Android smartphone.

 For further details on “Sony | Music Center,” visit the

following URL: http://www.sony.net/smcqa/

 Visit the website below and check the compatible

iPhone/Android smartphone models.

For iPhone: visit the App Store

For Android smartphone: visit Google Play

1 Make the BLUETOOTH connection with

iPhone/Android smartphone (page 8).

To select the audio device, press MENU, then

select [BLUETOOTH]  [SET AUDIODEV]

(page 21).

2 Launch the “Sony | Music Center”

application.

3 Press MENU, rotate the control dial to

select [SONY APP], then press it.

Connection to iPhone/Android smartphone

starts.

For details on the operations on iPhone/

Android smartphone, see the help of the

application.

If the device number appears

Make sure that the number is displayed (e.g.,

123456), then select [Yes] on the iPhone/Android

smartphone.

To terminate connection

Press MENU, rotate the control dial to select [SONY

APP], then press it.

Selecting the source or application

You can operate to select the desired source or

application on iPhone/Android smartphone.

To select the source

Press SRC repeatedly. Alternatively, press SRC,

rotate the control dial to select the desired source,

then press ENTER.

To display the source list

Press SRC.

Announcement of SMS by voice guide

(Android smartphone only)

Messages of SMS are automatically read out

through the car speakers when they are received.

For details on settings, refer to the help of the

application.

Replying a message of SMS (Android

smartphone only)

You can reply a message by touching the reply icon.

1 Activate the “Sony | Music Center” application,

then touch the [Reply] (reply) icon.

The message input display appears on the “Sony |

Music Center” application.

2 Input a reply message by voice recognition.

The list of message candidates appears on the

“Sony | Music Center” application.

3 Rotate the control dial to select the desired

message, then press it.

The message is sent out.

Useful Functions

Establishing the Sony | Music Center

connection

18GB

Making sound and display settings

You can adjust the settings relating to sound and

display via iPhone/Android smartphone.

For details on settings, refer to the help of the

application.

Using Voice Recognition

(Android smartphone only)

1 Press and hold VOICE to activate voice

recognition.

2 Say the desired voice command into the

microphone.

To deactivate voice recognition

Press VOICE.

Notes

 Voice recognition may not be available in some cases.

 Voice recognition may not work properly depending

on the performance of the connected Android

smartphone.

 Operate under conditions where noise such as engine

sound is minimized during voice recognition.

Using Siri Eyes Free

Siri Eyes Free allows you to use an iPhone

handsfree by simply speaking into the microphone.

This function requires you to connect an iPhone to

the unit via BLUETOOTH. Availability is limited to

iPhone 4s or later. Make sure that your iPhone is

running the latest iOS version.

You must complete BLUETOOTH registration and

connection configurations for the iPhone with the

unit in advance. For details, see “Preparing a

BLUETOOTH Device” (page 8).

To select the iPhone, press MENU, then select

[BLUETOOTH]  [SET AUDIODEV] (page 21).

1 Activate the Siri function on the iPhone.

For details, refer to the operating instructions

supplied with the iPhone.

2 Press and hold VOICE for more than 2

seconds.

The voice command display appears.

3 After the iPhone beeps, speak into the

microphone.

The iPhone beeps again, then Siri starts

responding.

To deactivate Siri Eyes Free

Press VOICE.

Notes

 The iPhone may not recognize your voice depending

on usage conditions. (For example, if you are in a

moving car.)

 Siri Eyes Free may not function properly, or the

response time may lag in locations where iPhone

signals are difficult to receive.

 Depending on the iPhone’s operating condition, Siri

Eyes Free may not function properly, or may quit.

 If you play a track with an iPhone using the

BLUETOOTH audio connection, when the track starts

playback via BLUETOOTH, Siri Eyes Free automatically

quits and the unit switches to the BLUETOOTH audio

source.

 When Siri Eyes Free is activated during audio

playback, the unit may switch to the BLUETOOTH

audio source even if you do not specify a track to play.

 When connecting the iPhone to the USB port, Siri Eyes

Free may not function properly, or may quit.

 When connecting the iPhone to the unit via USB, do

not activate Siri with the iPhone. Siri Eyes Free may

not function properly, or may quit.

 There is no audio sound while Siri Eyes Free is

activated.

19GB

Canceling the DEMO Mode

You can cancel the demonstration display which

appears when the source is off and the clock is

displayed.

1 Press MENU, rotate the control dial to

select [GENERAL], then press it.

2 Rotate the control dial to select [SET

DEMO], then press it.

3 Rotate the control dial to select [SET

DEMO-OFF], then press it.

The setting is complete.

4 Press (back) twice.

The display returns to normal reception/play

mode.

Basic Setting Operation

You can set items in the following setup categories:

General setup (GENERAL), Sound setup (SOUND),

Display setup (DISPLAY), BLUETOOTH Setup

(BLUETOOTH), Sony | Music Center Setup

(SONY APP)

1 Press MENU.

2 Rotate the control dial to select the setup

category, then press it.

The items that can be set differ depending on

the source and settings.

3 Rotate the control dial to select the

options, then press it.

To return to the previous display

Press (back).

General Setup (GENERAL)

AREA

Specifies the area/region to use this unit:

[EUROPE], [RUSSIA].

If the area/region currently set is changed, this

unit is reset, then the clock is displayed.

(Available only while the source is off and the

clock is displayed.)

DEMO (demonstration)

Activates the demonstration: [ON], [OFF].

CLOCK (clock) (page 7)

Sets the clock: [AUTO <RDS>], [MANUAL].

CAUT ALM (caution alarm)

Activates the caution alarm: [ON], [OFF]

(page 6).

(Available only while the source is off and the

clock is displayed.)

BEEP

Activates the beep sound: [ON], [OFF].

AUTO OFF

Shuts off automatically after a certain time when

the unit is turned off: [ON] (30 minutes), [OFF].

STEERING

Registers/resets the setting of the steering

wheel remote control.

(Available when connected with the connection

cable (not supplied).) (Available only while the

source is off and the clock is displayed.)

STR CONTROL (steering control)

Selects the input mode of the connected remote

control. To prevent a malfunction, be sure to

match the input mode with the connected

remote control before use.

CUSTOM

Input mode for the steering wheel remote

control

PRESET

Input mode for the wired remote control

excluding the steering wheel remote control

(automatically selected when [RESET

CUSTOM] is performed.)

Settings

20GB

EDIT CUSTOM

Registers the functions (SOURCE, ATT, VOL +/–,

SEEK +/–, VOICE, ON HOOK, OFF HOOK) to the

steering wheel remote control:

 Rotate the control dial to select the function

you want to assign to the steering wheel

remote control, then press it.

 While [REGISTER] is blinking, press and hold

the button on the steering wheel remote

control you want to assign the function to.

When registration is complete, [REGISTERED]

is displayed.

 To register other functions, repeat steps 

and .

(Available only when [STR CONTROL] is set to

[CUSTOM].)

RESET CUSTOM

Resets the setting of the steering wheel remote

control: [YES], [NO].

(Available only when [STR CONTROL] is set to

[CUSTOM].)

Notes

 While making settings, only button operation on

the unit is available. For safety, park your car

before making this setting.

 If an error occurs while registering, all the

previously-registered information remains. Restart

registration from the function where the error

occurred.

 This function may not be available on some

vehicles. For details on the compatibility of your

vehicle, visit the support site on the back cover.

USB MODE

Changes the USB mode: [ANDROID], [MSC/MTP].

(Available only when the USB source is selected.)

AF/TA (alternative frequencies/traffic

announcement)

Selects the alternative frequencies (AF) and

traffic announcement (TA) setting: [AF-ON], [TA-

ON], [AF/TA-ON], [AF/TA-OFF].

(Available when any source is selected.)

REGIONAL

Restricts reception to a specific region: [ON],

[OFF]. (Available only when FM is received.)

BTM (best tuning memory) (page 11)

(Available only when the tuner is selected.)

FIRMWARE

(Available only while the source is off and the

clock is displayed.)

Checks/updates the firmware version. For

details, visit the support site on the back cover.

FW VERSION (firmware version)

Displays current firmware version.

FW UPDATE (firmware update)

Enters firmware update process: [YES], [NO].

Updating the firmware takes a few minutes to

complete. During the update, do not turn the

ignition to the OFF position, nor remove the USB

device.

Sound Setup (SOUND)

This setup menu is available when any source is

selected.

EQ10 PRESET

Selects an equalizer curve from 10 equalizer

curves or off:

[OFF], [R&B], [ROCK], [POP], [HIP-HOP], [EDM],

[JAZZ], [SOUL], [COUNTRY], [KARAOKE]*,

[CUSTOM].

The equalizer curve setting can be memorized

for each source.

* [KARAOKE] reduces the vocal sound but cannot

fully remove it during playback. Also, using a

microphone is not supported.

EQ10 CUSTOM

Sets [CUSTOM] of EQ10.

Selects the equalizer curve:

[BAND1] 32 Hz, [BAND2] 63 Hz, [BAND3] 125 Hz,

[BAND4] 250 Hz, [BAND5] 500 Hz, [BAND6] 1 kHz,

[BAND7] 2 kHz, [BAND8] 4 kHz, [BAND9] 8 kHz,

[BAND10] 16 kHz.

The volume level is adjustable in 1 dB steps,

from -6 dB to +6 dB.

BALANCE

Adjusts the sound balance: [RIGHT-15] –

[CENTER] – [LEFT-15].

FADER

Adjusts the relative level: [FRONT-15] – [CENTER]

– [REAR-15].

La pagina sta caricando ...

Sony DSX-A410BT Manuale del proprietario

Sony DSX-A410BT Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti