DE Betriebsanleitung
Bewässerungscomputer
EN Operation Instructions
Water Computer
FR Mode d’emploi
Programmateur d’arrosage
NL Gebruiksaanwijzing
Besproeiingscomputer
IT Istruzioni per l’uso
Computer per irrigazione
ES Instrucciones de empleo
Programador de riego
PT Manual de instruções
Computador de rega
SL Navodilo za uporabo
Namakalnega računalnika
FlexControl
Art. 1883
SL PT
ES
IT
NL FR
EN DE
2
F1 / F2
OK
+
2
1
3
Mo Tu Th
Fr
Sa Su 2nd 3rd
W
e
1x 2x 3x
Sensor
865
9
7
I1
q
I2
w N
I3 / M1
e
r
t
I4
u i
z
I5
o
p
3
P1
Mo Tu Th
Fr
Sa Su
W
e
P2 P3
P4
Mo Tu Th
Fr
Sa Su 2nd 3rd
W
e
1x 2x 3x
P5 P6
1. SAFETY ............................18
2. FUNCTION ..........................19
3. PUTTING YOUR WATER COMPUTER
INTO OPERATION ....................21
4. PROGRAMMING .....................22
5. STORAGE ..........................24
6. MAINTENANCE ......................25
7. TROUBLESHOOTING ..................25
8. ACCESSORIES .......................26
9. TECHNICAL DATA ....................27
10. SERVICE / WARRANTY ................28
Original instructions.
For safety reasons, children and young
people under 16 as well as anyone who is
not familiar with these operating instructions
should not use the product. Persons with reduced
physical or mental abilities may use the product only
if they are supervised or instructed by a responsible
person. Children must be supervised to ensure that
they do not play with the product. Never operate the
product when you are tired, ill or under the influence
of alcohol, drugs or medicine.
Intended use:
The GARDENA Water Computer is intended for
private use in domestic and hobby gardens, exclu-
sively for outdoor use, to control sprinklers and
watering systems. The Water Computer can be used
for automatic watering during holidays.
DANGER! The GARDENA Water Computer
must not be used for industrial purposes or
in conjunction with chemicals, foodstuffs,
easily flammable and explosive materials.
GARDENA Water Computer FlexControl
1. SAFETY
Battery:
To ensure the Water Computer runs safely,
only a 9V alkaline manganese battery
(alkaline) type IEC 6LR61 must be used!
In order to stop the Water Computer from failing
because of a weak battery if you are away for
a long time, the battery must be replaced when
the battery symbol flashes.
EN
18
Setting up:
The Water Computer may only be set up vertically
with the sleeve nut to the top to prevent water
penetrating into the battery compartment.
The minimum water output to ensure that the Water
Computer functions correctly is 20 – 30 l/h.
For example, at least 10 x 2-litre Drip Heads are
required to control the Micro- Drip-System.
At high temperatures (over 60 °C at the display) the
LCD display may extinguish. This does not affect
the program in any way. When the computer cools
down the LCD display illuminates again.
The max. temperature for the water flow is 40 °C.
v Only use clear fresh water.
The minimum operating pressure is 0.5 bar, the
maximum operating pressure is 12 bar.
Avoid tensile strain.
v Do not pull the hose connected to the Water
Computer.
If the controller is removed when the valve
is open, the valve remains open until the con-
troller is fitted again.
DANGER!
This product makes an electromagnetic field while
it operates. This field may under some conditions
interfere with active or passive medical implants. To
decrease the risk of conditions that can possibly
injure or kill, we recommend persons with medical
implants to speak with their physician and the med-
ical implant manufacturer before you operate the
product.
DANGER!
Small parts can be easily swallowed. There is also
a risk that the polybag can suffocate toddlers. Keep
toddlers away when you assemble the product.
2. FUNCTION
With the Water Computer, the garden can be
watered fully automatically up to 3 times a day
at any time of day (every 8 hours). Sprinklers,
a sprinkler system or a drip head watering system
can be used for watering.
The Water Computer carries out watering fully auto-
matically according to the set program and can
therefore also be used during holidays. Early in the
morning or late in the evening, evaporation and
therefore water consumption is lowest.
EN
19
Controls [ Fig. F1 ]:
The watering programme is easily entered using the
controls.
A watering program comprises the watering start
time, duration and frequency.
Buttons Function
1
OK button
Applies the values set with the + button.
2
+ button
Changes the input data.
3
Rotary knob
Selects the program parameters.
Display [ Fig. F2 ]:
Display Description
5
Flash consecutively whilst watering is
carried out.
6
Flashes when the battery needs to be
replaced. The valve is still opened for
4weeks.
Is continuously displayed when the bat-
tery is empty. The valve is not opened
any more.
Replace battery (see 3. PUTTING YOUR
WATER COMPUTER INTO OPERATION
“Insert battery”).
7
Sensor
/
Sensor
Indicates that the sensor registers dry
and the programmed watering is carried
out.
Indicates that the sensor registers wet
and the programmed watering is not
carried out
(see 3. Putting YOUR WATER
COMPUTER INTO OPERATION “Con-
nect soil moisture or rain sensor”).
8
Program times
9
Watering cycle
EN
20
3. PUTTING YOUR WATER COMPUTER INTO OPERATION
Insert battery [ Fig. I1 / I2 ]:
The Water Computer must only be operated with
a 9V alkalimanganese (alkaline) battery type IEC
6LR61.
1. Remove controller
q
from the housing of the
Water Computer.
2. Insert battery in the battery compartment
w
.
Observe correct polarity
N
.
The display shows all LCD symbols for 2 seconds
(see 4. PROGRAMMING).
3. Install controller
q
on the housing again.
Connect Water Computer [ Fig. I3 / M1 ]:
The Water Computer is fitted with a sleeve nut
t
for taps with (G 1") (33.3 mm) thread. The adaptor
supplied
e
allows the Water Computer to be con-
nected to taps with a (G ³⁄₄") thread (26.5 mm).
v Insert the filter
r
into the sleeve nut
t
and con-
nect the water computer to the tap.
Connect soil moisture or rain sensor (optional)
[ Fig. I4 ]:
Apart from scheduled watering there is also the
option of including how damp the soil is or rainfall
into the watering programme.
Note:
If the soil is damp enough, the programme will be
stopped, or a programme will be prevented from
starting. Manual operation is possible at all times.
1. Remove controller
q
from the housing of
the Water Computer (see 3. PUTTING YOUR
WATER COMPUTER INTO OPERATION
“Insert battery”).
2. Place soil moisture sensor in the watered area
– or – place rain sensor (with extension cable if
necessary) outside the watered area.
3. Run the sensor cable
z
through the opening of
the housing.
4. Disconnect the cover
u
and insert the sensor
cable plug
z
into the sensor connection
i
of
the water computer.
It can take up to 1 min. until the status of the
sensor is shown on the display.
EN
21
An adapter cable may be required to connect
older sensors, which can be purchased from
GARDENA Service, GARDENA Adapter
cable Art. No. 1189-00.600.45.
Fit anti-theft device (optional) [ Fig. I5 ]:
To secure your Water Computer against theft,
you can obtain the GARDENA Anti-theft device
Art. No. 1815-00.791.00 from GARDENA
Service.
1. Tightly screw the clamp
o
complete with the
screw
p
into the circular groove on the rear of
the water computer.
2. Use clamp
o
e.g. for fixing a chain.
It is no longer possible to remove the screw after it
has been screwed in.
4. PROGRAMMING
Tip:
V Program the Water Computer with the tap
turned off.
In this way you can avoid getting wet.
Enter watering program:
To set the programme, the controller can be
removed and mobile programming can be carried
out (see 3. PUTTING YOUR WATER COMPUTER
INTO OPERATION “Insert battery”).
Set time and day
[ Fig. P1 ]:
1. Turn rotary knob to
.
The time in hours flashes.
2. Select the time in hours (example: 10 hours) with
the + button and confirm with the OK button.
The time in minutes flashes.
3. Select the time in minutes (example: 20 minutes)
with the + button and confirm with the OK but-
ton.
The day of the week flashes.
4. Select the day of the week (example: friday) with
the + button and confirm with the OK button.
A bar is displayed beneath the selected day of
the week.
Set watering start time
[ Fig. P2 ]:
5. Turn the rotary knob to
.
The start time hours flash.
EN
22
6. Set the start time hours (example: 18 hours)
with the + button and confirm with the OK but-
ton.
The start time minutes flash.
7. Set the start time minutes (example: 30 minutes)
with the + button and confirm with the OK but-
ton.
Set watering duration
[ Fig. P3 ]:
8. Turn the rotary knob to
.
The duration hours flash.
9. Set the duration hours (example: 0 hours) with
the + button and confirm with the OK button.
The duration minutes flash.
10. Set the duration minutes (example: 20 minutes)
with the + button and confirm with the OK but-
ton.
Set watering cycle (day, frequency)
[ Fig. P4 ]:
The watering days can be selected directly (Mo to
Su) or every 2nd (2nd) or 3rd (3rd) day. On the
watering day, the watering frequency can be set to
1x (every 24 hours), 2x (every 12 hours) or 3x (every
8 hours) respectively.
Comfort function: Watering is performed every
day if only the watering frequency is selected.
11. Turn the rotary knob to
. Mo flashes.
12. Select the days (e. g. Mo and Sa) with the + but-
ton and confirm / deselect with the OK button.
A bar is displayed beneath the selected days.
13. Set the frequency (e. g. 2x = twice in 24 hours)
with the + button and select with the + button
and confirm / deselect with the OK button.
A bar is displayed beneath the selected
frequency.
Activate program (Prog):
14. Turn the rotary knob to Prog.
The program is activated.
Next watering start time and day:
The next programmed watering start time and start
day can be displayed if the rotary knob is turned to
Prog.
v Press the OK button.
The next watering start time and start day is dis-
played.
Important information:
If the subsequent day is not a watering day, the
watering will stop at 12:00 a.m.
EN
23
Manual watering [ Fig. P5 ]:
The valve can be opened or closed manually at
any time. The controller must be fitted.
1. Turn the rotary knob to On.
The valve is opened, the drips flash one after the
other and the watering duration flashes (preset to
30 minutes at the factory) for 10 seconds in the
display.
2. Whilst the watering duration is flashing, it can
be modified with the + button (between 1 and
59 minutes) (example: 15 minutes) and confirmed
with the OK button.
3. Turn the rotary knob to Off to close the valve
early.
The valve is closed.
The adjusted manual watering duration is saved
and is independent from the watering duration in
the program, i.e. the adjusted watering duration is
preset for each future manual valve opening.
Deactivate watering program [ Fig. P6 ]:
The watering program is not executed when the
knob is set to Off. The program remain stored.
A program-controlled open valve can also be closed
early without changing the program data (watering
start time, watering duration, watering cycle).
v Turn the rotary knob to Off.
The watering program is deactivated.
To reactivate the watering program turn the rotary
knob to Prog.
5. STORAGE
To put into storage / Overwintering:
1. To preserve the battery, it should be
removed (see 3. PUTTING YOUR WATER
COMPUTER INTO OPERATION).
When the battery is inserted again in spring, the
watering program must be newly entered again.
2. Store controller and valve unit in a dry place
where they are protected from frost.
Disposal:
(in accordance with RL2012/19/EC)
The product must not be disposed of to
normal household waste. It must be dis-
posed of in line with local environmental
regulations.
Important! Dispose of the product through or via
your municipal recycling collection centre.
EN
24
Disposing of flat batteries:
v Please return flat batteries to a GARDENA
dealer or dispose of them properly at your
nearest recycling centre.
Only dispose of batteries when they are flat.
6. MAINTENANCE
Clean filter [ Fig. I3 / M1 ]:
The filter
r
should be checked regularly and
cleaned when necessary.
1. Unscrew sleeve nut
t
of the Water Computer by
hand from the tap thread (do not use pliers).
2. If necessary unscrew the adaptor
e
.
3. Remove filter
r
from sleeve nut
t
and clean.
4. Fit the Water Computer again (see 3. PUTTING
YOUR WATER COMPUTER INTO OPERATION
“Connecting Water Computer”).
Problem Possible Cause Remedy
No display appears Battery inserted incorrectly. v
Check polarity markings match (+/–).
Flat battery. v
Insert new (alkaline) battery.
Temperature on the display is higher
than 60 °C.
v
Display appears after temperature
has dropped.
Manual watering is not possible
using the rotary knob set to On
Battery flat (
is continuously
displayed).
v
Insert new (alkaline) battery.
Tap turned off. v
Turn tap on.
Controller is not connected. v
Mount controller on housing.
7. TROUBLESHOOTING
EN
25
Problem Possible Cause Remedy
Watering program is not being
undertaken (no watering)
Program entry / modification during or
just before the start pulse.
v
Make program entry / modification
outside the programmed start times.
Tap turned off. v
Turn tap on.
Soil moisture or rain sensor registers
damp.
v
If dry, check setting / location of soil
moisture / rain sensor.
Controller is not connected. v
Mount controller on housing.
Battery flat (
is continuously
displayed).
v
Insert new (alkaline) battery.
Water Computer does not close Minimum quantity of water drawn
is less than 20 l/h.
v
Connect more drip heads.
NOTE: For any other malfunctions please contact the GARDENA service department. Repairs must
only be done by GARDENA service departments or specialist dealers approved by GARDENA.
8. ACCESSORIES
GARDENA Soil Moisture Sensor Art. 1188
GARDENA Rain Sensor electronic Art. 1189
GARDENA Anti-theft device Art. 1815-00.791.00
from GARDENA Service
GARDENA Adapter cable To connect older GARDENA sensors Art. 1189-00.600.45
from GARDENA Service
EN
26
9. TECHNICAL DATA
Unit Value (Art. 1883)
Min./max. operating pressure bar 0,5 / 12
Operating temperature range °C 5 to 50
Flow medium clear fresh water
Max. liquid temperature °C 40
Number of program-controlled
watering cycles per day
3 x (every 8 hrs.), 2 x (every 12 hrs.), 1 x (every 24 hrs.)
Number of program-controlled
watering cycles per week
Monday to Sunday or every second or third day.
Watering duration 1 minute to 1 hour 59 minutes
Battery required 1 × 9V alkaline manganese (alkaline) battery type IEC 6LR61
Operating time of the battery
approx. 1 year
GARDENA Cable Adapter For simultaneous connection of rain and soil
moisture sensor
Art. 1189-00.630.00
from GARDENA Service
EN
27
10. SERVICE / WARRANTY
Service:
Please contact the address on the back page.
Warranty:
In the event of a warranty claim, no charge is levied
to you for the services provided.
GARDENA Manufacturing GmbH offers a two-year
warranty (effective as of the date of purchase) for
this product. This warranty includes all significant
defects of the product that can be proved to be
material or manufacturing faults. This warranty is ful-
filled by supplying a fully functional replacement
product or by repairing the faulty product sent to us
free of charge; we reserve the right to choose
between these options. This service is subject to the
following provisions:
• The product was used for its intended purpose
as per the recommendations in the operating
instructions.
• Neither the purchaser nor a third party has
attempted to repair the product.
This manufacturer’s warranty does not affect
warranty entitlements against the dealer / retailer.
If problems arise with this product, please contact
our Service department or send the defective
product along with a brief description of the fault
to GARDENA Manufacturing GmbH, making sure
to have sufficiently covered any shipping costs
and to have followed the relevant postage and
packaging guidelines. A warranty claim must be
accompanied by a copy of the proof of purchase.
Consumables:
Faults which occur as a result of incorrectly
installed or leaking batteries are not covered by
the guarantee.
Damage caused by frost is not covered by the
warranty.
EN
28
DE
Produkthaftung
Wir weisen ausdrücklich darauf hin, dass wir in Übereinstimmung mit dem
Produkthaftungsgesetz nicht für Schäden haften, die durch unsere Produkte ent-
stehen, wenn diese unsachgemäß und nicht durch einen von uns autorisierten
Servicepartner repariert wurden oder wenn keine Original GARDENA Teile oder
von uns zugelassene Teile verwendet wurden.
EN
Product liability
In accordance with the German Product Liability Act, we hereby expressly
declare that we accept no liability for damage incurred from our products where
said products have not been properly repaired by a GARDENA-approved service
partner or where original GARDENA parts or parts authorised by GARDENA were
not used.
FR
Responsabilité
Conformément à la loi relative à la responsabilité du fait des produits défectueux,
nous déclarons expressément par la présente que nous déclinons toute respon-
sabilité pour les dommages résultant de nos produits, si lesdits produits n’ont
pas été correctement réparés par un partenaire d‘entretien agréé GARDENA ou
si des pièces d’origine GARDENA ou des pièces agréées GARDENA n’ont pas été
utilisées.
NL
Productaansprakelijkheid
Conform de Duitse wet inzake productaansprakelijkheid verklaren wij hierbij
uitdrukkelijk dat wij geen aansprakelijkheid aanvaarden voor schade ontstaan
uit onze producten waarbij deze producten niet zijn gerepareerd door een
GARDENA-erkende servicepartner of waarbij geen originele GARDENA-onder-
delen of onderdelen die door GARDENA zijn goedgekeurd zijn gebruikt.
IT
Responsabilità del prodotto
In conformità con la Legge tedesca sulla responsabilità del prodotto, con la pre-
sente dichiariamo espressamente che decliniamo qualsiasi responsabilità per
danni causati dai nostri prodotti qualora non siano stati correttamente riparati
presso un partner di assistenza approvato GARDENA o laddove non siano stati
utilizzati ricambi originali o autorizzati GARDENA.
ES
Responsabilidad sobre el producto
De acuerdo con la Ley de responsabilidad sobre productos alemana, por la pre-
sente declaramos expresamente que no aceptamos ningún tipo de responsabili-
dad por los daños ocasionados por nuestros productos si dichos productos
no han sido reparados por un socio de mantenimiento aprobado por GARDENA
o si no se han utilizado piezas originales GARDENA o piezas autorizadas por
GARDENA.
PT
Responsabilidade pelo produto
De acordo com a lei alemã de responsabilidade pelo produto, declaramos que
não nos responsabilizamos por danos causados pelos nossos produtos, caso os
tais produtos não tenham sido devidamente reparados por um parceiro de assi-
stência GARDENA aprovado ou se não tiverem sido utilizadas peças GARDENA
originais ou peças autorizadas pela GARDENA.
SL
Odgovornost proizvajalca
V skladu z nemškimi zakoni o odgovornosti za izdelke,izrecno izjavljajo, da ne
sprejemamo nobene odgovornosti za škodo, ki jo povzročijo naši izdelki, če teh
niso ustrezno popravili GARDENINI odobreni servisni partnerji ali pri tem niso
bili uporabljeni originalni GARDENINI nadomestni deli ali GARDENINIMI homo-
logiranimi nadomestnimi deli.
99
DE EU-Konformitätserklärung
Der Unterzeichner, Husqvarna AB, 561 82 Huskvarna, Schweden, bescheinigt
hiermit, dass die nachstehend aufgeführten Geräte bei Verlassen des Werks die
harmonisierten EU-Leitlinien, EU-Normen für Sicherheit und besondere Normen
erfüllen. Dieses Zertifikat verliert seine Gültigkeit, wenn die Geräte ohne unsere
Genehmigung verändert werden.
EN EC Declaration of Conformity
The undersigned, Husqvarna AB, 561 82 Huskvarna, Sweden, hereby certifies
that, when leaving our factory, the units indicated below are in accordance with the
harmonised EU guidelines, EU standards of safety and product specific standards.
This certificate becomes void if the units are modified without our approval.
FR Déclaration de conformité CE
Le constructeur, soussigné : Husqvarna AB, 561 82 Huskvarna, Suède, déclare
qu’à la sortie de ses usines le matériel neuf désigné ci-dessous était conforme
aux prescriptions des directives européennes énoncées ciaprès et conforme aux
règles de sécurité et autres règles qui lui sont applicables dans le cadre de l’Union
européenne. Toute modification apportée à cet appareil sans notre accord annule
la validité de ce certificat.
NL EG-conformiteitsverklaring
De ondergetekende, Husqvarna AB, 561 82 Huskvarna, Zweden, verklaart hierbij
dat de producten die hieronder staan vermeld, wanneer ze onze fabriek verlaten,
in overeenstemming zijn met de geharmoniseerde Europese richtlijnen, EU-normen
voor veiligheid en productspecifieke normen.
Dit certificaat vervalt als de producten worden aangepast zonder onze toestemming.
IT Dichiarazione di conformità CE
La sottoscritta Husqvarna AB, 561 82 Huskvarna, Svezia, certifica che il prodotto
qui di seguito indicato, nei modelli da noi commercializzati, è conforme alle direttive
armonizzate UE nonché agli standard di sicurezza UE e agli standard specifici di
prodotto. Qualunque modifica apportata al prodotto senza nostra specifica autoriz-
zazione invalida la presente dichiarazione.
ES Declaración de conformidad CE
El abajo firmante, Husqvarna AB, 561 82 Huskvarna, Suecia, certifica por la
presente que, cuando salen de la fábrica, las unidades indicadas a continuaci-
ón cumplen las normas de armonización de la UE, las normas de la UE sobre
seguridad y las normas específicas del producto. Este certificado quedará sin
efecto si se modifican las unidades sin nuestra autorización.
PT Declaração de conformidade CE
O abaixo-assinado, Husqvarna AB, 561 82 Huskvarna, Suécia, certifica por
este meio que, ao sair da nossa fábrica, as unidades indicadas acima estão em
conformidade com as diretrizes uniformizadas da UE, os padrões de segurança da
UE e os padrões específicos do produto. Este certificado deixa de ser válido se as
unidades forem modificadas sem a nossa aprovação.
SL Izjava ES o skladnosti
Spodaj podpisana, Husqvarna AB, 561 82 Huskvarna, Švedska, s to izjavo
potrjuje, da je bila spodaj navedena enota ob izhodu iz tovarne skladna z usklaje-
nimi smerni cami EU, standardi EU za varnost in standardi, specifičnimi za izdelek.
Izjava postane neveljavna v primeru neodobrene spremembe enote.
100
Produktbezeichnung:
Description of the product:
Désignation du produit :
Beschrijving van het product:
Descrizione del prodotto:
Descripción del producto:
Descrição do produto:
Opis izdelka:
Bewässerungscomputer
Water Computer
Programmateur d’arrosage
Besproeiingscomputer
Computer per irrigazione
Programador de riego
Computador de rega
Namakalnega računalnika
Anbringungsjahr der CE-Kennzeichnung:
Year of CE marking:
Année d’apposition du marquage CE :
Installatiejaar van de CE-aanduiding:
Anno di applicazione della certificazione CE:
Colocación del distintivo CE:
Ano de marcação pela CE:
Leto namestitve CE-oznake:
2013
Ulm, den 06.06.2016
Ulm, 06.06.2016
Fait à Ulm, le 06.06.2016
Ulm, 06-06-2016
Ulm, 06.06.2016
Ulm, 06.06.2016
Ulm, 06.06.2016
Ulm, 06.06.2016
Der Bevollmächtigte
Authorised representative
Le mandataire
De gevolmachtigde
Persona delegata
La persona autorizada
O representante
Pooblaščenec
Reinhard Pompe
Vice President
Hinterlegte Dokumentation:
GARDENA Technische
Dokumentation,
M. Kugler, 89079 Ulm
Deposited Documentation:
GARDENA Technical
Documentation,
M. Kugler, 89079 Ulm
Documentation déposée:
Documentation technique
GARDENA,
M. Kugler, 89079 Ulm
EU-Richtlinien:
EC-Directives:
Directives CE :
EG-richtlijnen:
Direttive UE:
Directiva CE:
Diretivas CE:
Direktive EU:
2014/30/EG
2011/65/EG
Produkttyp:
Product type:
Type de produit :
Producttype:
Tipo di prodotto:
Tipo de producto:
Tipo de produto:
Vrsta izdelka:
Artikelnummer:
Article number:
Référence :
Artikelnummer:
Codice articolo:
Referencia:
Número de referência:
Številka izdelka:
FlexControl 1883
101
Deutschland / Germany
GARDENA Manufacturing GmbH
Central Service
Hans-Lorenser-Straße 40
D-89079 Ulm
Produktfragen:
(+49) 731 490-123
Reparaturen:
(+49) 731 490-290
Albania
COBALT Sh.p.k.
Rr. Siri Kodra
1000 Tirana
Argentina
Husqvarna Argentina S.A.
Av.del Libertador 5954 –
Piso 11 – Torre B
(C1428ARP) Buenos Aires
Phone: (+54) 11 5194 5000
Armenia
Garden Land Ltd.
61 Tigran Mets
0005 Yerevan
Australia
Husqvarna Australia Pty. Ltd.
Locked Bag 5
Central Coast BC
NSW 2252
Phone: (+ 61) (0) 2 4352 7400
customer.service@
husqvarna.com.au
Austria / Österreich
Husqvarna Austria GmbH
Industriezeile 36
4010 Linz
Tel. : (+43) 732 77 01 01-485
service.gardena@
husqvarnagroup.com
Azerbaijan
Firm Progress
a. Aliyev Str. 26A
1052 Baku
Belgium
Husqvarna België nv/sa
Gardena Division
Rue Egide Van Ophem 111
1180 Uccle / Ukkel
Tel.: (+32) 2 720 92 12
Mail: [email protected]
Bosnia / Herzegovina
SILK TRADE d.o.o.
Industrijska zona Bukva bb
74260 Tešanj
Brazil
Husqvarna do Brasil Ltda
Av. Francisco Matarazzo,
1400 – 19
o
andar
São Paulo – SP
CEP: 05001-903
Tel: 0800-112252
marketing.br.husqvarna@
husqvarna.com.br
Bulgaria
AGROLAND България АД
бул. 8 Декември, № 13
Офис 5
1700 Студентски град
София
Тел.: (+359) 24 66 6910
Canada / USA
GARDENA Canada Ltd.
100 Summerlea Road
Brampton, Ontario L6T 4X3
Phone: (+1) 905 792 93 30
Chile
Maquinarias Agroforestales
Ltda. (Maga Ltda.)
Santiago, Chile
Avda. Chesterton
# 8355 comuna Las Condes
Phone: (+56) 2 202 4417
Zipcode: 7560330
China
Husqvarna (Shanghai)
Management Co., Ltd.
富世华（上海）管理有限公司
3F, Benq Square B,
No207, Song Hong Rd.,
Chang Ning District,
Shanghai, PRC. 200335
上海市长宁区淞虹路207号明
基广场B座3楼, 邮编: 200335
Colombia
Husqvarna Colombia S.A.
Calle 18 No. 68 D-31, zona
Industrial de Montevideo
Bogotá, Cundinamarca
Tel. 571 2922700 ext. 105
Costa Rica
Compania Exim
Euroiberoamericana S.A.
Los Colegios, Moravia,
200 metros al Sur del Colegio
Saint Francis – San José
Phone: (+506) 297 68 83
Croatia
SILK ADRIA d.o.o.
Josipa Lončara 3
10090 Zagreb
Phone: (+385) 1 3794 580
Cyprus
Med Marketing
17 Digeni Akrita Ave
P.O. Box 27017
1641 Nicosia
Czech Republic
Husqvarna Česko s.r.o.
Türkova 2319/5b
149 00 Praha 4 – Chodov
Bezplatná infolinka :
800 100 425
Denmark
GARDENA DANMARK
Lejrvej 19, st.
3500 Værløse
Tlf.: (+45) 70 26 47 70
www.gardena.com / dk
Dominican Republic
BOSQUESA, S.R.L
Carretera Santiago Licey
Km. 5 ½
Esquina Copal II.
Santiago
Dominican Republic
Phone: (+809) 736-0333
Ecuador
Husqvarna Ecuador S.A.
Arupos E1-181 y 10 de
Agosto Quito, Pichincha
Tel. (+593) 22800739
francisco.jacome@
husqvarna.com.ec
Estonia
Husqvarna Eesti OÜ
Gardena Division
Valdeku 132
Tallinn
11216, Estonia
Finland
Oy Husqvarna Ab
Gardena Division
Lautatarhankatu 8 B / PL 3
00581 HELSINKI
France
Husqvarna France
9/11 Allée des pierres mayettes
92635 Gennevilliers Cedex
France
http : //www.gardena.com/ fr
N° AZUR: 0 810 00 78 23
(Prix d’un appel local)
Georgia
ALD Group
Beliashvili 8
1159 Tleilisi
Great Britain
Husqvarna UK Ltd
Preston Road
Aycliffe Industrial Park
Newton Aycliffe
County Durham
DL5 6UP
Greece
Π.ΠΑΠΑΔΟΠΟΥΛΟΣ ΑΕΒΕ
Λεωφ. Αθηνών 92
Αθήνα
Τ.Κ.104 42
Ελλάδα
Τηλ. (+30) 210 5193 100
Hungary
Husqvarna Magyarország Kft.
Ezred u. 1 - 3
1044 Budapest
Telefon: (+36) 1 251-4161
Iceland
Ó. Johnson & Kaaber
Tunguhalsi 1
110 Reykjavik
Ireland
Husqvarna UK Ltd
Preston Road
Aycliffe Industrial Park
Newton Aycliffe
County Durham
DL5 6UP
Italy
Husqvarna Italia S.p.A.
Via Santa Vecchia 15
23868 VALMADRERA (LC)
Phone: (+39) 0341.203.111
105
Japan
KAKUICHI Co. Ltd.
Sumitomo Realty &
Development Kojimachi
BLDG., 8F
5 -1 Nibanncyo
Chiyoda-ku
Tokyo 102-0084
Phone: (+81) 33 264 4721
Kazakhstan
LAMED Ltd.
155/1, Tazhibayevoi Str.
050060 Almaty
IP Schmidt
Abayavenue 3B
110 005 Kostanay
Korea
Kyung Jin Trading CO.,LTD.
107-4, SunDuk Bld.,
YangJae-dong,
Seocho-gu,
Seoul, (zipcode: 137-891)
Phone: (+82) (0)2 574-6300
Kyrgyzstan
Alye Maki
av. Moladaya Guardir J 3
720014
Bishkek
Latvia
Husqvarna Latvija SIA
Gardena Division
Ulbrokas 19A
LV-1021 Rīga
Lithuania
UAB Husqvarna Lietuva
Gardena Division
Ateities pl. 77C
LT-52104 Kaunas
Luxembourg
Magasins Jules Neuberg
39, rue Jacques Stas
Luxembourg-Gasperich 2549
Case Postale No. 12
Luxembourg 2010
Phone: (+352) 40 14 01
Mexico
AFOSA
Av. Lopez Mateos Sur # 5019
Col. La Calma 45070
Zapopan, Jalisco, Mexico
Phone: (+52) 33 3818-3434
Moldova
Convel S.R.L.
290A Muncesti Str.
2002 Chisinau
Netherlands
Husqvarna Nederland B.V.
GARDENA Division
Postbus 50131
1305 AC ALMERE
Phone: (+31) 36 521 00 10
Neth. Antilles
Jonka Enterprises N.V.
Sta. Rosa Weg 196
P.O. Box 8200
Curaçao
Phone: (+599) 9 767 66 55
New Zealand
Husqvarna New Zealand Ltd.
PO Box 76-437
Manukau City 2241
Phone: (+64) (0) 9 9202410
Norway
Husqvarna Norge AS
Gardena Division
Trøskenveien 36
1708 Sarpsborg
Tel: 69 10 47 00
www.gardena.no
Peru
Husqvarna Perú S.A.
Jr. Ramón Cárcamo 710
Lima 1
Tel: (+51) 1 3320400 ext. 416
Poland
Husqvarna
Poland Spółka z o.o.
ul. Wysockiego 15 b
03-371 Warszawa
Phone: (+48) 22 330 96 00
Portugal
Husqvarna Portugal, SA
Lagoa - Albarraque
2635 - 595 Rio de Mouro
Tel.: (+351) 21 922 85 30
Fax : (+351) 21 922 85 36
Romania
Madex International Srl
Soseaua Odaii 117 - 123,
RO 013603 Bucureşti, S1
Phone: (+40) 21 352.76.03
Russia / Россия
ООО „Хускварна“
141400, Московская обл.,
г. Химки,
улица Ленинградская,
владение 39, стр.6
Бизнес Центр
„Химки Бизнес Парк“,
помещение ОВ02_04
http://www.gardena.ru
Serbia
Domel d.o.o.
Autoput za Novi Sad bb
11273 Belgrade
Phone: (+381) 1 18 48 88 12
Singapore
Hy-Ray PRIVATE LIMITED
40 Jalan Pemimpin
#02-08 Tat Ann Building
Singapore 577185
Phone: (+65) 6253 2277
Slovak Republic
Husqvarna Česko s.r.o.
Türkova 2319/5b
149 00 Praha 4 – Chodov
Bezplatná infolinka:
800 154 044
Slovenia
Husqvarna Austria GmbH
Industriezeile 36
4010 Linz
Tel.: (+43) 732 77 01 01-485
service.gardena@
husqvarnagroup.com
South Africa
Husqvarna
South Africa (Pty) Ltd
Postnet Suite 250
Private Bag X6,
Cascades, 3202
South Africa
Phone: (+27) 33 846 9700
Spain
Husqvarna España S.A.
Calle de Rivas nº 10
28052 Madrid
Phone: (+34) 91 708 05 00
Suriname
Agrofix n.v.
Verlengde Hogestraat #22
Phone: (+597) 472426
Pobox : 2006
Paramaribo
Suriname – South America
Sweden
Husqvarna AB
Gardena Division
S-561 82 Huskvarna
Switzerland / Schweiz
Husqvarna Schweiz AG
Consumer Products
Industriestrasse 10
5506 Mägenwil
Phone: (+ 41) (0) 62 887 37 90
Turkey
Dost Bahçe Dış Ticaret
Mümessillik A.Ş
Yunus Mah. Adil Sok. No: 3
Ic Kapi No: 1 Kartal
34873 Istanbul
Phone: (+90) 216 38 93 939
Ukraine / Україна
ТОВ « Хусварна Україна »
вул. Васильківська, 34,
офіс 204-г
03022, Київ
Тел. (+38) 044 498 39 02
Uruguay
FELI SA
Entre Ríos 1083 CP 11800
Montevideo – Uruguay
Tel : (+598) 22 03 18 44
Venezuela
Corporación Casa y Jardín C.A.
Av. Caroní, Edif. Trezmen, PB.
Colinas de Bello Monte.
1050 Caracas.
Tlf : (+58) 212 992 33 22
1883-20.960.05/1217
© GARDENA Manufacturing GmbH
D-89070 Ulm
http://www.gardena.com
106
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
in altre lingue
- English: Gardena 1883-20 User manual
Documenti correlati
-
Gardena 1874 Manuale utente
-
Gardena 1881-20 Manuale utente
-
-
-
-
-
-
Gardena 1890-20 Manuale utente
-
-