dji Go Guida utente

Marca: dji

Modello: Go

Tipo: Guida utente

Questo manuale è adatto anche per

Matrice 600

MATRICE 600

DISCLAIMER AND

SAFETY GUIDELINES

2017.10

V1.4

Searching for Keywords

Search for keywords such as “battery” and “install” to ﬁnd a topic. If you are using Adobe Acrobat

Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search.

Navigating to a Topic

View a complete list of topics in the table of contents. Click on a topic to navigate to that section.

Printing this Document

This document supports high resolution printing.

Contents

Safety at a Glance

NOTICE

Glossary

Pre-ight Checklist

Disclaimer and Warning

Compliance Information

Before You Begin

Individual Parts

Regarding Genuine and Functional Parts 9

Remote Controller 9

Center Frame 10

Retractable Modules 10

Landing Gear 10

Flight Control System 10

Lightbridge 2 Air System 11

GPS-Compass Pro 11

Propulsion System 12

DJI GO App 13

Firmware 13

Product Care

Storage and Transportation 14

Maintenance and Upkeep 14

Flight Condition Requirements

Weather Conditions and Surrounding Environment 15

Interference with Flight Controller and Communications 15

Operating the Aircraft Responsibly 15

Flight Modes, Functions and Warnings

Flight Modes 17

Failsafe and Return-to-Home 18

Low Battery 18

Compliance with Regulations & No Fly Zones

Regulations 19

No Fly Zones 20

Safety at a Glance

1. Environmental Considerations

• Always y at locations that are clear of buildings and other

obstacles.

• DO NOT y above or near large crowds.

• Avoid ying at altitudes above 400 feet (120 m).

• Be very careful when ying 8,202 feet (2,500 m) or more above

sea level.

• Fly in moderate weather conditions with temperatures between

14° and 104° F (-10° and 40° C).

2. Pre-ight Checklist

• Remote controller and aircraft batteries are fully charged.

• Propellers and frame arms are unfolded.

• Propellers are in good condition and securely tightened.

• All parts are mounted securely, cables are connected correctly and rmly.

• There is nothing obstructing the motors.

• Be sure to calibrate the compass at every new ight location or if you receive a software prompt.

3. Operation

• Stay away from the rotating propellers and motors.

• Maintain a line of sight to your aircraft at all times.

• NEVER stop the motors mid-ight.

• DO NOT answer incoming calls during ight.

• DO NOT y under the inuence of alcohols or drugs.

• During the Return-to-Home procedure, you can adjust the altitude to avoid obstacles.

• In the instance of a Low Battery Warning, land the aircraft at a safe location.

• Always keep both hands on the remote controller while the motor is spinning. Power off the aircraft

before turning off the remote controller after landing.

4. Maintenance and Upkeep

• DO NOT use aged, chipped or broken propellers.

• Recommended storage temperature: between 71° and 82° F (22° and 28° C).

• Refer to the

Intelligent Flight Battery Safety Guidelines

for more information about safe use of the

battery.

5. Observe Local Laws and Regulations

• DO NOT y inside the No Fly Zones. You can nd a detailed list of these areas at http://ysafe.dji.com/

• The DJI No Fly Zone is not a replacement for local government regulations or good judgment.

• Avoid ying in areas where rescue teams are actively using the airspace.

The MATRICE

600

aircraft is NOT a toy and

is not suitable for children

under the age of 18.

Note that ‘Safety at a Glance’ only

provides a quick overview of the

safety tips. Make sure you read and

understand the remaining sections

of this document.

Fly in Open Areas Strong GPS Signal Maintain Line of Sight Fly Below

400 feet (120 m)

Avoid ying over or near obstacles, crowds, high voltage power lines, trees or bodies of water.

DO NOT y near strong electromagnetic sources such as power lines and base stations as it may affect the onboard

compass.

≥

8m/s

DO NOT use the aircraft in adverse weather conditions such as rain, fog, snow,

lightning and wind speeds exceeding 8 m/s or 17 mph.

Stay away from the rotating

propellers and motors.

No Fly Zone

Learn more at:

http://www.dji.com/ysafe/no-y

NOTICE

All instructions and other collateral documents are subject to change at the sole discretion of SZ DJI

TECHNOLOGY CO., LTD. For up-to-date product information, visit http://www.dji.com and click on the

Matrice 600 product page.

Glossary

The following terms are used throughout the product literature to indicate various levels of potential harm

when operating this product:

NOTICE: Procedures, which if not properly followed, create a possibility of physical property

damage AND possibility of injury.

CAUTION: Procedures, which if not properly followed, create the probability of physical property

damage AND possibility of serious injury.

WARNING: Procedures, which if not properly followed, create the probability of property damage,

collateral damage, and serious injury OR create a high probability of supercial injury.

Read the ENTIRE user manual to become familiar with the features of

this product before operating. Failure to operate this product in a safe

and responsible manner could result in injury or damage to the product or other property. This

product is not intended for use by children without direct adult supervision.

This is a sophisticated product. It must be operated with caution and common sense and requires

some basic mechanical ability. Do not use with incompatible components or alter this product

in any way outside of the documents provided by SZ DJI TECHNOLOGY CO., LTD. These Safety

Guidelines contain instructions for safety, operation and maintenance. It is essential to read and

follow all of the instructions and warnings in the user manual, prior to assembly, setup or use, in

order to operate the product correctly and avoid damage or serious injury.

Age Recommendation: Not for children under the age of 18. This is not a toy.

Pre-ight Checklist

1. Use only genuine parts in good condition.

2. Remote controller, Intelligent Flight Batteries, and mobile device are fully charged.

3. Securely mount propellers onto motors, propellers and frame arms are unfolded, and motors can start

and function normally.

4. All parts are mounted securely, and cables are connected correctly and rmly.

5. Follow the on-screen instructions to calibrate the compass.

6. DJI GO app and aircraft's rmware have been upgraded to the latest version.

7. Your ight area is outside of any No Fly Zones and ight conditions are suitable for ying the aircraft.

8. Be sure that you are NOT ying under the inuence of alcohol, drugs or any substance that may impair

your cognitive abilities.

9. Be familiar with the selected ight mode and understand all safety functions and warnings.

10. Be sure to observe all local regulations, obtain appropriate authorizations, and understand the risks.

REMEMBER: It is solely your responsibility to comply with all ight regulations.

Disclaimer and Warning

This product is NOT a toy and is not suitable for children under the age of 18. Adults should keep the aircraft

out of the reach of children and exercise caution when operating this aircraft in the presence of children.

While the product adopts advanced technology, inappropriate use of the product could result in personal

injury or property damages. Please read the materials associated with the product before your rst use of

the product. These documents are included in the product package and are also available online on the DJI

product page at http://www.dji.com.

This product is a multirotor ying platform that offers easy ight when in good working order as set forth

below. Visit http://www.dji.com for the most current instructions and warnings and http:// knowbeforeyouy.

org/ for more information about ight safety and compliance.

The information in this document affects your safety and your legal rights and responsibilities. Read this entire

document carefully to ensure proper conguration before use. Failure to read and follow the instructions and

warnings in this document may result in product loss, serious injury to you, or damage to your aircraft.

By using this product, you hereby signify that you have read this disclaimer carefully and that you

understand and agree to abide by the terms and conditions herein. EXCEPT AS EXPRESSLY PROVIDED

IN DJI AFTER-SALES SERVICE POLICIES AVAILABLE AT (HTTP://WWW.DJI.COM/SERVICE), THE

PRODUCT AND ALL MATERIALS, AND CONTENT AVAILABLE THROUGH THE PRODUCT ARE

PROVIDED “AS IS” AND ON AN “AS AVAILABLE” BASIS, WITHOUT WARRANTY OR CONDITION OF

ANY KIND, EITHER EXPRESS OR IMPLIED. DJI DISCLAIMS ALL WARRANTIES OF ANY KIND, EXCEPT

AS EXPRESSLY PROVIDED IN DJI AFTER-SALES SERVICE POLICIES, WHETHER EXPRESS OR IMPLIED,

RELATING TO THE PRODUCT, PRODUCT ACCESSORIES, AND ALL MATERIALS, INCLUDING: (A) ANY

IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, QUIET

ENJOYMENT, OR NON-INFRINGEMENT; AND (B) ANY WARRANTY ARISING OUT OF COURSE OF

DEALING, USAGE, OR TRADE. DJI DOES NOT WARRANT, EXCEPT AS EXPRESSLY PROVIDED IN DJI

LIMITED WARRANTY, THAT THE PRODUCT, PRODUCT ACCESSORIES, OR ANY PORTION OF THE

PRODUCT, OR ANY MATERIALS, WILL BE UNINTERRUPTED, SECURE, OR FREE OF ERRORS, VIRUSES,

OR OTHER HARMFUL COMPONENTS, AND DO NOT WARRANT THAT ANY OF THOSE ISSUES WILL BE

CORRECTED.

NO ADVICE OR INFORMATION, WHETHER ORAL OR WRITTEN, OBTAINED BY YOU FROM THE

PRODUCT, PRODUCT ACCESSORIES, OR ANY MATERIALS WILL CREATE ANY WARRANTY

REGARDING DJI OR THE PRODUCT THAT IS NOT EXPRESSLY STATED IN THESE TERMS. YOU

ASSUME ALL RISKS FOR ANY DAMAGE THAT MAY RESULT FROM YOUR USE OF OR ACCESS TO

THE PRODUCT, PRODUCT ACCESSORIES, AND ANY MATERIALS. YOU UNDERSTAND AND AGREE

THAT YOU USE THE PRODUCT AT YOUR OWN DISCRETION AND RISK, AND THAT YOU ARE SOLELY

RESPONSIBLE FOR ANY PERSONAL INJURY, DEATH, DAMAGE TO YOUR PROPERTY (INCLUDING

YOUR COMPUTER SYSTEM OR MOBILE DEVICE OR DJI HARDWARE USED IN CONNECTION WITH THE

PRODUCT) OR THIRD PARTY PROPERTY, OR THE LOSS OF DATA THAT RESULTS FROM YOUR USE OF

OR INABILITY TO USE THE PRODUCT.

SOME JURISDICTIONS MAY PROHIBIT A DISCLAIMER OF WARRANTIES AND YOU MAY HAVE OTHER

RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION.

DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as “DJI”) and its affiliated

companies. Names of products, brands, etc., appearing in this document are trademarks or registered

trademarks of their respective owner companies.

Limitation of Liability

IN NO EVENT WILL THE DJI ENTITIES BE LIABLE TO YOU FOR ANY INDIRECT, INCIDENTAL, SPECIAL,

CONSEQUENTIAL OR PUNITIVE DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,

GOODWILL, OR ANY OTHER INTANGIBLE LOSS) ARISING OUT OF OR RELATING TO YOUR ACCESS

TO OR USE OF, OR YOUR INABILITY TO ACCESS OR USE, THE PRODUCT, PRODUCT ACCESSORIES,

OR ANY MATERIALS, FLIGHT ENVIRONMENT DATA, WHETHER BASED ON WARRANTY, CONTRACT,

TORT (INCLUDING NEGLIGENCE), STATUTE, OR ANY OTHER LEGAL THEORY, AND WHETHER OR NOT

ANY DJI ENTITY HAS BEEN INFORMED OF THE POSSIBILITY OF DAMAGE.

EXCEPT AS OTHERWISE AGREED UPON BETWEEN YOU AND DJI, THE AGGREGATE LIABILITY OF

THE DJI ENTITIES TO YOU FOR ALL CLAIMS ARISING OUT OF OR RELATING TO THE USE OF OR ANY

INABILITY TO USE ANY PORTION OF THE PRODUCT OR OTHERWISE UNDER THESE TERMS, WHETHER

IN CONTRACT, TORT, OR OTHERWISE, IS LIMITED TO $100.

Data Storage and Usage

When you use our mobile apps or our products or other software, you may provide DJI with data

regarding the use and operation of the product, such as flight telemetry data (e.g., speed, altitude,

battery life, and information about the gimbal and camera) and operations record. Please refer to DJI

Compliance Information

FCC Warning Message

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2) This device must accept any interference received,

including interference that may cause undesired operation.

Any changes or modications not expressly approved by the party responsible for compliance could void

the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Information

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In

order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the

antenna shall not be less than 20cm during normal operation.

IC RSS Warning

This device complies with Industry Canada licence-exempt RSS standard (s). Operation is subject to the

following two conditions: (1) this device may not cause interference, and (2) this device must accept any

interference, including interference that may cause undesired operation of the device.

DJI reserves the right to update this Disclaimer and Safety Guidelines. Please visit http://www.dji.com and check your email

periodically for the latest version. This disclaimer is made in various language versions; in the event of divergence among

different versions, the English version shall prevail.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de

licence.

L'exploitation est autorisée aux deux conditions suivantes:

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est

susceptible d'en compromettre le fonctionnement.

IC Radiation Exposure Statement:

This equipment complies with IC RF radiation exposure limits set forth for an uncontrolled environment.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

This equipment should be installed and operated with minimum distance 20cm between the radiator &

your body.

Any Changes or modications not expressly approved by the party responsible for compliance could void

the user’s authority to operate the equipment.

NCC Warning Message

低功率電波輻射性電機管理辦法

第十二條經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大

功率或變更原設計之特性及功能。

第十四條低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應改善至無干

擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或

工業、科學及醫療用電波輻射性電機設備之干擾。

KCC Warning Message

“해당무선설비는 운용 중 전파혼신 가능성이 있으므로 인명안전과 관련된 서비스는 할 수 없습니다 .”

“해당 무선설비는 운용 중 전파혼신 가능성이 있음”

EU Compliance Statement

EU Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device is in

compliance with the essential requirements and other relevant provisions of the Directive 2014/53/EU.

A copy of the EU Declaration of Conformity is available online at www.dji.com/euro-compliance

EU contact address: DJI GmbH, Industriestrasse. 12, 97618, Niederlauer, Germany

Declaración de cumplimiento UE: SZ DJI TECHNOLOGY CO., LTD. por la presente declara que este

dispositivo cumple los requisitos básicos y el resto de provisiones relevantes de la Directiva 2014/53/EU.

Hay disponible online una copia de la Declaración de conformidad UE en www.dji.com/euro-compliance

Dirección de contacto de la UE: DJI GmbH, Industriestrasse. 12, 97618, Niederlauer, Germany

EU-verklaring van overeenstemming: SZ DJI TECHNOLOGY CO., LTD. verklaart hierbij dat dit apparaat

voldoet aan de essentiële vereisten en andere relevante bepalingen van Richtlijn 2014/53/EU.

De EU-verklaring van overeenstemming is online beschikbaar op www.dji.com/euro-compliance

Contactadres EU: DJI GmbH, Industriestrasse. 12, 97618, Niederlauer, Germany

Declaração de conformidade da UE: A SZ DJI TECHNOLOGY CO., LTD. declara, através deste documento,

que este dispositivo está em conformidade com os requisitos essenciais e outras disposições relevantes

da Diretiva 2014/53/EU.

Existe uma cópia da Declaração de conformidade da UE disponível online em

www.dji.com/euro-compliance

Endereço de contacto na UE: DJI GmbH, Industriestrasse. 12, 97618, Niederlauer, Germany

Dichiarazione di conformità UE: SZ DJI TECHNOLOGY CO., LTD. dichiara che il presente dispositivo è

conforme ai requisiti essenziali e alle altre disposizioni rilevanti della direttiva 2014/53/EU.

Una copia della dichiarazione di conformità UE è disponibile online all'indirizzo Web

www.dji.com/euro-compliance

Indirizzo di contatto UE: DJI GmbH, Industriestrasse. 12, 97618, Niederlauer, Germany

Déclaration de conformité UE: Par la présente, SZ DJI TECHNOLOGY CO., LTD déclare que cet appareil est

conforme aux principales exigences et autres clauses pertinentes de la directive européenne 2014/53/EU.

Une copie de la déclaration de conformité UE est disponible sur le site www.dji.com/euro-compliance

Adresse de contact pour l'UE : DJI GmbH, Industriestrasse. 12, 97618, Niederlauer, Germany

EU-Compliance: Hiermit erklärt SZ DJI TECHNOLOGY CO., LTD., dass dieses Gerät den wesentlichen

Anforderungen und anderen einschlägigen Bestimmungen der EU-Richtlinie 2014/53/EU entspricht.

Eine Kopie der EU-Konformitätserklärung nden Sie online auf www.dji.com/euro-compliance.

Kontaktadresse innerhalb der EU: DJI GmbH, Industriestrasse. 12, 97618, Niederlauer, Germany

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF

USED BATTERIES ACCORDING TO THE INSTRUCTIONS

Environmentally friendly disposal

Old electrical appliances must not be disposed of together with the residual waste, but have to be

disposed of separately. The disposal at the communal collecting point via private persons is for free.

The owner of old appliances is responsible to bring the appliances to these collecting points or to

similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and

the treatment of toxic substances.

Before You Begin

The following documents have been produced to help you safely operate and make full use of your

Matrice 600:

Matrice 600 In the Box

Matrice 600 Disclaimer and Safety Guidelines

Matrice 600 Quick Start Guide

Matrice 600 Intelligent Flight Battery Safety Guidelines

Matrice 600 User Manual

Check to see that you have all of the components listed in the

Matrice 600 In the Box

document. Before

assembly, read the

Matrice 600 Disclaimer and Safety Guidelines

. Get prepared using the

Matrice 600

Quick Start Guide

. Complete the assembly with the help of the

Matrice 600 User Manual

and the video

tutorial on the DJI website (http://www.dji.com). For more information, please refer to the

Matrice 600

User Manual

available on the DJI website. Make sure you fully understand the functionality of each

individual part, the ight condition requirements, the key contingency warning functions/systems, and all

government regulations before each ight. If you have any questions or problems during the assembly,

maintenance or use of this product, please contact DJI or a DJI authorized dealer.

Individual Parts

Regarding Genuine and Functional Parts

To avoid component malfunction, serious injury, and property damage, observe the following rules:

Use only genuine DJI parts or parts certified by DJI. Unauthorized parts or parts from non-DJI

certied manufacturers may cause system malfunctions and compromise safety.

Ensure there are no foreign objects (such as water, oil, soil, sand, etc.) inside of the aircraft or its

components.

Ensure the aircraft and its components-including but not limited to the remote controller, ight

controller, Lightbridge

2 Air System, landing gear, GPS, compass, propulsion system, and batteries-

are all in good working order, damage-free, and functioning well. Refer to the remaining sections in

this document for more details on how to ensure the functionality of these components.

DO NOT remove parts that come with the aircraft-including but not limited to the ight controller,

power management unit, and Lightbridge 2 Air System-for other uses. DO NOT replace any of them

with other parts.

Remote Controller

1. Ensure the remote controller is fully charged before each ight.

2. If the remote controller is powered on and has NOT been used for 5 minutes, it will sound an alert. After 10

minutes it will automatically power off. Move the sticks or perform some other action to cancel the alert.

3. Adjust the clamp of the mobile device holder to allow a rm grip on your mobile device.

4. Ensure the mobile device holder is rmly in place and does not slip.

5. Ensure the antennas of the remote controller are unfolded and adjusted to the proper position to achieve

optimal transmission quality.

6. Repair or replace the remote controller if damaged. A damaged remote controller antenna will greatly

decrease performance.

7. For the GPS in the remote controller to function properly and the Home Point to be accurate, ensure the

DJI logo is facing the sky and keep the remote controller away from any metal objects.

8. Linking is required if you wish to replace your remote controller or receiver or add a new remote controller.

Refer to the User Manual for details.

Center Frame

To avoid component malfunction, serious injury, and property damage, observe the following rules:

DO NOT short out the reserved ports on the center frame.

There are two DC18V power ports and one LIPO-6S power port reserved on the center frame. The

DC18V power ports have an output voltage of 18 V and a maximum output current of 3 A. The

LIPO-6S power port has the same output voltage as the Intelligent Flight Battery and a maximum

output current of 10 A. Use the power ports in strict accordance with their specications.

DO NOT damage the cables when mounting or removing the upper or lower plate of the center frame.

Retractable Modules

To avoid component malfunction, serious injury, and property damage, observe the following rules:

DO NOT interchange the mounting positions of the left and right retractable modules. Identify the

left retractable module by locating the integrated control board.

DO NOT interchange the cabling of the left and right retractable modules, or else the landing gear

will not function normally.

Arrange the cables neatly to avoid them from being cut by the frame edges.

Landing Gear

To avoid component malfunction, serious injury, and property damage, observe the following rules:

The antennas are attached to the landing gear legs upon delivery. DO NOT move the antennas.

Before mounting the landing gear legs, pull out the antenna connector pins.

Be careful not to damage the antenna cables when mounting or removing the landing gear.

Watch your ngers when mounting the springs to the landing gear.

Ensure the landing gear is lowered before landing.

Flight Control System

To avoid component malfunction, serious injury, and property damage, observe the following rules:

Flight Controller

DO NOT attempt to modify the structure of the ight controller.

DO NOT change the mounting position and orientation of the ight controller.

DO NOT short out the ports on the ight controller.

Connect cables in strict accordance with port descriptions.

The recommended storage temperature is -20° to 50°C (-4° to 122° F).

Power Management Unit (PMU)

The PMU has an input voltage range of 10.5-51 V (3-12S battery equivalent), output voltage of 9 V

and maximum output current of 2 A. Be sure to use the PMU in strict accordance with these

specications.

Only use the power cable extending from the center frame to supply power to the PMU.

The recommended storage temperature is -20° to 50°C (-4° to 122° F).

Flight Controller

1. The ight controller is neither waterproof nor oil-proof.

2. Check regularly to ensure the ight controller is rmly secured.

3. DO NOT place devices producing heat near the ight controller.

PMU

1. DO NOT block or cover the PMU to maximize heat dissipation and system performance.

Lightbridge 2 Air System

To avoid component malfunction, serious injury, and property damage, observe the following rules:

Install the antennas before powering on the Air System.

ONLY use the DBUS cable that comes with the Matrice 600, or else the Lightbridge 2 Air System will

not function normally.

GPS-Compass Pro

To avoid component malfunction, serious injury, and property damage, make sure:

GPS-Compass Pro’s collapsible mount is unfolded and the extension rod is securely mounted

before each ight.

GPS-Compass Pro is securely mounted and the arrow is pointing towards the nose of the aircraft.

Settings in the DJI Assistant 2 are correct.

To avoid possible serious injury and property damage, observe the following rule:

1. Land immediately when severe drifting occurs in ight, i.e., the aircraft does NOT y in straight lines.

GPS

1. Avoid catching your ngers in the collapsible mount of the GPS-Compass Pro.

2. Separate the GPS-Compass Pro from the body of the aircraft using the extension rod.

3. Fly in open areas. Tall buildings or steel structures may block the GPS signal and affect the accuracy of

the on-board compass.

Compass

1. Ensure that the compass is calibrated before your rst ight.

2. DO NOT calibrate your compass where there is a chance of strong magnetic interference, such as

magnetite, parking structures, and steel reinforcements underground.

3. DO NOT carry ferromagnetic materials with you during calibration such as cellular phones.

4. The DJI GO app will prompt you to resolve the compass issue if the compass is affected by strong

interference after calibration is complete. Follow the prompted instructions to resolve the compass issue.

Propulsion System

To avoid serious injury to yourself or others, which may be caused by the rotating propellers and

motors, observe the following rules:

Propellers

DO NOT use aged, chipped, or broken propellers.

Always power off the aircraft before touching the propellers.

Be aware of the sharp edges of the propellers when mounting or removing the propellers. Wear

gloves or take other protective measures when touching the propellers.

Ensure that the propellers are securely mounted to prevent them from falling off the motors.

Ensure that the propellers are unfolded before each ight.

DO NOT turn on the motors when propellers are mounted and there are other people or animals in

the immediate vicinity.

Motors

Ensure that the motors are securely mounted and rotating smoothly.

DO NOT attempt to modify the structure of the motors.

DO NOT touch or let your hands or body come in contact with the motors after ight as they may

be hot.

To avoid possible serious injury and property damage, observe the following rule

1. DO NOT block any of the ventilation holes on the motors.

Motors

1. Keep the motors free of dust.

2. If a motor is stuck and unable to rotate freely, execute the CSC (Combination Stick Command) to stop the

motors immediately.

3. Ensure the motors sound a normal tune when powered on.

DJI GO App

1. Be sure to fully charge your tablet or mobile device before launching the DJI GO app. A tablet is

recommended for a better user experience.

2. If you are using a phone as your mobile display device, be sure to continue ying safely when the phone

receives an incoming call. DO NOT accept phone calls during ight.

3. Read all prompted safety tips, warning messages, and disclaimers carefully. Be familiar with the related

regulations in your area. You are solely responsible for being aware of all relevant regulations and ying in

a way that is compliant. Read and understand the warning messages before:

a. Using the Auto-take off and Auto-landing features.

b. Re-setting your Home Point.

c. Setting the altitude beyond the default limit.

d. Switching between ight modes.

4. Land your aircraft immediately if there is an alert shown in the app.

5. Examine and check all warning messages on the checklist displayed in the app prior to each ight.

6. Use the in-app simulator to practice your ight skills if you have never operated the aircraft or if you do not

have sufcient experience to be comfortable operating the aircraft.

7. Beginner Mode is enabled by default when you launch the DJI GO app for the rst time. The aircraft’s

altitude and ight distance is restricted when ying in Beginner Mode. We recommend you y in Beginner

Mode to perfect your ight skills. Operate the actual aircraft only after you are condent that you have

mastered adequate ight skills.

8. Cache the map data of the area where you intend to y the aircraft by connecting to the Internet before

each ight.

Firmware

To avoid serious injury to children and animals, observe the following rule:

Keep children and animals at a safe distance during any rmware upgrade, system calibration, and

parameter setting procedures.

1. For safety, always update the rmware to the latest version when an upgrade notication is shown in the

DJI GO app.

2. Firmware upgrade notications will inform about new rmware upgrades. You are required to read and

understand the information shown. You further understand and agree that the data including but not

limited to ight telemetry data and user selection records may be uploaded to and maintained on a DJI-

designated server.

3. Only use ofcial DJI rmware.

4. Be sure to update the remote controller’s firmware to the latest version after you update the aircraft’s

rmware.

5. The remote controller may become unlinked from the aircraft after updating. Re-link the remote controller

and aircraft.

Product Care

Storage and Transportation

To avoid serious injury to children and animals, observe the following rules:

Small parts, such as cables and straps, are dangerous if swallowed. Keep all parts out of reach of

children and animals.

Remove the Intelligent Flight Batteries during transportation.

Remove the gimbal from the aircraft during transportation or when storing for an extended period.

1. Store the Intelligent Flight Battery and remote controller in a cool, dry place away from direct sunlight to

ensure that the built-in LiPo battery does NOT overheat. Recommended storage temperature: between

22° and 28°C (71° and 82° F) for storage periods of more than three months. Never store in environments

outside the temperature range of -20° to 45° C (-4° to 113° F).

Maintenance and Upkeep

1. Inspect the aircraft every 50 ights, or after ying for over 20 hours, in order to keep the aircraft working

properly.

2. Check every part of the aircraft after any crash or violent impact. If you have any problems or questions,

please contact a DJI authorized dealer.

3. Regularly check the Battery Level Indicators to see the current battery level and overall battery life. When

the battery life reaches 0%, it can no longer be used.

Flight Condition Requirements

Weather Conditions and Surrounding Environment

The aircraft is designed to operate in good to moderate weather conditions. To avoid collision, serious

injury and property damage, observe the following rules:

DO NOT use the aircraft in severe weather conditions. These include wind speeds exceeding 8 m/s,

snow, rain, smog, heavy wind, hail, lightning, tornadoes or hurricanes.

Keep the aircraft at least 10 meters (30 feet) away from obstacles, people, animals, buildings, public

infrastructure, trees, and bodies of water when in ight. Stay even further away from the above

objects as your altitude increases.

Be EXTRA cautious when operating the aircraft indoors.

1. Aircraft and battery performance is subject to environmental factors such as air density and temperature.

a. Be very careful when ying 8,202 feet (2,500 meters) or more above sea level as battery and aircraft

performance may be reduced.

2. DO NOT use the aircraft near accidents, fire, explosions, floods, tsunamis, avalanches, landslides,

earthquakes, dust, or sandstorms.

Interference with Flight Controller and Communications

1. Fly in open areas. Tall buildings or steel structures may affect the accuracy of the on-board compass and

block the GPS signal.

2. Avoid interference between the remote controller and other wireless equipment. Make sure to turn off the

Wi-Fi on your mobile device.

3. DO NOT y near areas with magnetic or radio interference. These include but are NOT limited to: high

voltage lines, large scale power transmission stations or mobile base stations and broadcasting towers.

Failing to do so may compromise the transmission quality of this product or cause remote controller and

video transmission errors which may affect flight orientation and location accuracy. The aircraft may

behave abnormally or go out of control in areas with too much interference.

Operating the Aircraft Responsibly

To avoid serious injury and property damage, observe the following rules:

Make sure you are NOT drunk, taking drugs, under the inuence of anesthesia, or suffering from

dizziness, fatigue, nausea or any other conditions, whether physical or mental, that could impair

your ability to operate the aircraft safely.

Never stop the motors mid-ight unless in emergency situations when doing so can reduce the

risk of damage or injury.

Upon landing, power off the aircraft rst, then power off the remote controller.

DO NOT drop, launch, re or otherwise project any dangerous payloads on or at any buildings,

persons or animals, or which could cause personal injury or property damage.

1. Make sure you have been sufficiently trained and are fully aware of any contingency plans before

accidents happen.

2. Make sure you have a ight plan and never y the aircraft recklessly.

3. Respect the privacy of others when using the camera. Make sure you comply with local privacy laws,

regulations, and moral standards.

4. DO NOT use this product for any reason other than general personal use. DO NOT use it for any illegal or

inappropriate purpose (such as spying, military operations, or unauthorized investigations).

5. DO NOT use this product to defame, abuse, harass, stalk, threaten or otherwise violate the legal rights (such

as the right of privacy and publicity) of others.

6. DO NOT trespass into private property of others.

Flight Modes, Functions and Warnings

Flight Modes

To avoid serious injury and property damage, observe the following rules:

DO NOT switch from P-mode to either A-mode or F-mode unless you are sufciently familiar with

the aircraft’s behavior for each ight mode, since disabling GPS may result in being unable to y

the aircraft safely.

The aircraft will enter A-mode in the following two instances:

a. Passive: When there is weak GPS signal or when the compass experiences interference.

b. Active: Users toggle the ight mode switch to A-mode.

In A-mode, some advanced features are disabled. Therefore, the aircraft cannot position in this

mode and is easily affected by its surroundings, which may result in horizontal shifting. Use the

remote controller to position the aircraft.

Maneuvering the aircraft in A-mode can be difcult. Before switching the aircraft into A-mode,

make sure you are comfortable ying in this mode. DO NOT y the aircraft too far away as you

might lose control and cause a potential hazard.

Avoid ying in areas where GPS signal is weak, or in conned spaces. The aircraft will otherwise

be forced to enter A-mode, leading to potential ight hazards, please land it in a safe place as

soon as possible.

P-mode is preferred for most flying scenarios. Users can switch to A-mode where and when P-mode is

unavailable. Be aware that some features are NOT available for A-mode, and therefore be EXTRA cautious

when ying in A-mode.

1. P-mode (Positioning): P-mode works best when the GPS signal is strong. There are different states of

P-mode, which will be automatically selected by the Matrice 600 depending on GPS signal strength:

a. P-GPS: GPS is available, and the aircraft is using GPS for positioning.

b. P-ATTI: When GPS is not available, the aircraft is using only its barometer for positioning, so only

altitude is controlled.

2. A-mode (Attitude): The GPS is NOT used for positioning. The aircraft only uses its barometer to maintain

altitude. If it is still receiving a GPS signal, the aircraft can automatically return home if the Remote

Controller signal is lost and if the Home Point has been recorded successfully.

3. F-mode (Function): Intelligent Flight is activated in this mode. Ensure you are familiar with Intelligent Flight

functions before use.

If you intend to switch to modes that disable GPS assistance (e.g., A-mode), you are required to accept the

prompted disclaimer to enable this function. If this function is enabled, you further understand and agree

that data including but not limited to ight telemetry data and function records could be uploaded to and

maintained on a DJI-designated server.

Failsafe and Return-to-Home

1. The Return-to-Home feature will NOT work if the GPS signal is insufcient or if GPS is not active.

2. Press the RTH (Return-to-Home) button on the remote controller to bring the aircraft back to the Home

Point instead of turning off the remote controller.

3. Tall buildings may adversely affect the RTH procedure. Please adjust the aircraft location, altitude and

speed while returning home to avoid obstacles.

4. Make sure to always y the aircraft within the transmission range of the remote controller.

5. When updating the Home Point, do NOT block the GPS signal of the remote controller and ensure the new

Home Point is correct on the live map.

6. Only use the Return-to-Home functions in case of emergency, as they may be affected by the weather,

the environment, or any nearby magnetic elds.

7. DO NOT update the Home Point near tall buildings, as the GPS may be blocked and lead to an incorrect

location being stored.

8. The aircraft cannot avoid obstacles during the Failsafe RTH; therefore it is important to set an appropriate

Failsafe altitude before each ight.

Low Battery

1. When the Critical Battery Level Warning activates and the aircraft is descending automatically, you may

push the throttle up to maintain the aircraft's altitude and navigate it to a more appropriate location for

landing.

2. When battery warnings are triggered, promptly bring the aircraft back to the Home Point or land to avoid

losing power during ight and causing damage to the aircraft, property, animals, and people.

La pagina sta caricando ...

dji Go Guida utente

Marca: dji

Modello: Go

Tipo: Guida utente

Questo manuale è adatto anche per

Matrice 600

Scarica il pdf

rapporto

in altre lingue

English: dji Go User guide

dji Go Guida utente

Questo manuale è adatto anche per

dji Go Guida utente

in altre lingue

Documenti correlati