dji Go Guida utente

Tipo
Guida utente

Questo manuale è adatto anche per

MATRICE 600
DISCLAIMER AND
SAFETY GUIDELINES
2017.10
V1.4
Searching for Keywords
Search for keywords such as battery and install to find a topic. If you are using Adobe Acrobat
Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search.
Navigating to a Topic
View a complete list of topics in the table of contents. Click on a topic to navigate to that section.
Printing this Document
This document supports high resolution printing.
©
2017 DJI All Rights Reserved.
1
Contents
Safety at a Glance
2
NOTICE
4
Glossary
4
Pre-ight Checklist
4
Disclaimer and Warning
5
Compliance Information
6
Before You Begin
9
Individual Parts
9
Regarding Genuine and Functional Parts 9
Remote Controller 9
Center Frame 10
Retractable Modules 10
Landing Gear 10
Flight Control System 10
Lightbridge 2 Air System 11
GPS-Compass Pro 11
Propulsion System 12
DJI GO App 13
Firmware 13
Product Care
14
Storage and Transportation 14
Maintenance and Upkeep 14
Flight Condition Requirements
15
Weather Conditions and Surrounding Environment 15
Interference with Flight Controller and Communications 15
Operating the Aircraft Responsibly 15
Flight Modes, Functions and Warnings
17
Flight Modes 17
Failsafe and Return-to-Home 18
Low Battery 18
Compliance with Regulations & No Fly Zones
19
Regulations 19
No Fly Zones 20
2
©
2017 DJI All Rights Reserved.
Safety at a Glance
1. Environmental Considerations
Always y at locations that are clear of buildings and other
obstacles.
•  DO NOT y above or near large crowds.
Avoid ying at altitudes above 400 feet (120 m).
Be very careful when ying 8,202 feet (2,500 m) or more above
sea level.
Fly in moderate weather conditions with temperatures between
14° and 104° F (-10° and 40° C).
2. Pre-ight Checklist
Remote controller and aircraft batteries are fully charged.
Propellers and frame arms are unfolded.
Propellers are in good condition and securely tightened.
All parts are mounted securely, cables are connected correctly and rmly.
There is nothing obstructing the motors.
Be sure to calibrate the compass at every new ight location or if you receive a software prompt.
3. Operation
Stay away from the rotating propellers and motors.
Maintain a line of sight to your aircraft at all times.
•  NEVER stop the motors mid-ight.
DO NOT answer incoming calls during ight.
DO NOT y under the inuence of alcohols or drugs.
During the Return-to-Home procedure, you can adjust the altitude to avoid obstacles.
In the instance of a Low Battery Warning, land the aircraft at a safe location.
Always keep both hands on the remote controller while the motor is spinning. Power off the aircraft
before turning off the remote controller after landing.
4. Maintenance and Upkeep
DO NOT use aged, chipped or broken propellers.
Recommended storage temperature: between 71° and 82° F (22° and 28° C).
Refer to the
Intelligent Flight Battery Safety Guidelines
for more information about safe use of the
battery.
5. Observe Local Laws and Regulations
DO NOT y inside the No Fly Zones. You can nd a detailed list of these areas at http://ysafe.dji.com/ 
The DJI No Fly Zone is not a replacement for local government regulations or good judgment.
•  Avoid ying in areas where rescue teams are actively using the airspace.
The MATRICE
TM
600
aircraft is NOT a toy and
is not suitable for children
under the age of 18.
Note that ‘Safety at a Glance’ only
provides a quick overview of the
safety tips. Make sure you read and
understand the remaining sections
of this document.
©
2017 DJI All Rights Reserved.
3
Fly in Open Areas Strong GPS Signal Maintain Line of Sight Fly Below
400 feet (120 m)
Avoid ying over or near obstacles, crowds, high voltage power lines, trees or bodies of water.
DO NOT y near strong electromagnetic sources such as power lines and base stations as it may affect the onboard
compass.
8m/s
DO NOT use the aircraft in adverse weather conditions such as rain, fog, snow,
lightning and wind speeds exceeding 8 m/s or 17 mph.
Stay away from the rotating
propellers and motors.
No Fly Zone
Learn more at:
http://www.dji.com/ysafe/no-y
4
©
2017 DJI All Rights Reserved.
NOTICE
All instructions and other collateral documents are subject to change at the sole discretion of SZ DJI
TECHNOLOGY CO., LTD. For up-to-date product information, visit http://www.dji.com and click on the
Matrice 600 product page.
Glossary
The following terms are used throughout the product literature to indicate various levels of potential harm
when operating this product:
NOTICE: Procedures, which if not properly followed, create a possibility of physical property
damage AND possibility of injury.
CAUTION: Procedures, which if not properly followed, create the probability of physical property
damage AND possibility of serious injury.
WARNING: Procedures, which if not properly followed, create the probability of property damage,
collateral damage, and serious injury OR create a high probability of supercial injury.
Read the ENTIRE user manual to become familiar with the features of
this product before operating. Failure to operate this product in a safe
and responsible manner could result in injury or damage to the product or other property. This
product is not intended for use by children without direct adult supervision.
This is a sophisticated product. It must be operated with caution and common sense and requires
some basic mechanical ability. Do not use with incompatible components or alter this product
in any way outside of the documents provided by SZ DJI TECHNOLOGY CO., LTD. These Safety
Guidelines contain instructions for safety, operation and maintenance. It is essential to read and
follow all of the instructions and warnings in the user manual, prior to assembly, setup or use, in
order to operate the product correctly and avoid damage or serious injury.
Age Recommendation: Not for children under the age of 18. This is not a toy.
Pre-ight Checklist
1. Use only genuine parts in good condition.
2. Remote controller, Intelligent Flight Batteries, and mobile device are fully charged.
3. Securely mount propellers onto motors, propellers and frame arms are unfolded, and motors can start
and function normally.
4. All parts are mounted securely, and cables are connected correctly and rmly.
5. Follow the on-screen instructions to calibrate the compass.
6. DJI GO app and aircraft's rmware have been upgraded to the latest version.
7. Your ight area is outside of any No Fly Zones and ight conditions are suitable for ying the aircraft.
8. Be sure that you are NOT ying under the inuence of alcohol, drugs or any substance that may impair
your cognitive abilities.
9. Be familiar with the selected ight mode and understand all safety functions and warnings.
10. Be sure to observe all local regulations, obtain appropriate authorizations, and understand the risks.
REMEMBER: It is solely your responsibility to comply with all ight regulations.
©
2017 DJI All Rights Reserved.
5
Disclaimer and Warning
This product is NOT a toy and is not suitable for children under the age of 18. Adults should keep the aircraft
out of the reach of children and exercise caution when operating this aircraft in the presence of children.
While the product adopts advanced technology, inappropriate use of the product could result in personal
injury or property damages. Please read the materials associated with the product before your rst use of
the product. These documents are included in the product package and are also available online on the DJI
product page at http://www.dji.com.
This product is a multirotor ying platform that offers easy ight when in good working order as set forth
below. Visit http://www.dji.com for the most current instructions and warnings and http:// knowbeforeyouy.
org/ for more information about ight safety and compliance.
The information in this document affects your safety and your legal rights and responsibilities. Read this entire
document carefully to ensure proper conguration before use. Failure to read and follow the instructions and
warnings in this document may result in product loss, serious injury to you, or damage to your aircraft.
By using this product, you hereby signify that you have read this disclaimer carefully and that you
understand and agree to abide by the terms and conditions herein. EXCEPT AS EXPRESSLY PROVIDED
IN DJI AFTER-SALES SERVICE POLICIES AVAILABLE AT (HTTP://WWW.DJI.COM/SERVICE), THE
PRODUCT AND ALL MATERIALS, AND CONTENT AVAILABLE THROUGH THE PRODUCT ARE
PROVIDED “AS IS” AND ON AN “AS AVAILABLE” BASIS, WITHOUT WARRANTY OR CONDITION OF
ANY KIND, EITHER EXPRESS OR IMPLIED. DJI DISCLAIMS ALL WARRANTIES OF ANY KIND, EXCEPT
AS EXPRESSLY PROVIDED IN DJI AFTER-SALES SERVICE POLICIES, WHETHER EXPRESS OR IMPLIED,
RELATING TO THE PRODUCT, PRODUCT ACCESSORIES, AND ALL MATERIALS, INCLUDING: (A) ANY
IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, QUIET
ENJOYMENT, OR NON-INFRINGEMENT; AND (B) ANY WARRANTY ARISING OUT OF COURSE OF
DEALING, USAGE, OR TRADE. DJI DOES NOT WARRANT, EXCEPT AS EXPRESSLY PROVIDED IN DJI
LIMITED WARRANTY, THAT THE PRODUCT, PRODUCT ACCESSORIES, OR ANY PORTION OF THE
PRODUCT, OR ANY MATERIALS, WILL BE UNINTERRUPTED, SECURE, OR FREE OF ERRORS, VIRUSES,
OR OTHER HARMFUL COMPONENTS, AND DO NOT WARRANT THAT ANY OF THOSE ISSUES WILL BE
CORRECTED.
NO ADVICE OR INFORMATION, WHETHER ORAL OR WRITTEN, OBTAINED BY YOU FROM THE
PRODUCT, PRODUCT ACCESSORIES, OR ANY MATERIALS WILL CREATE ANY WARRANTY
REGARDING DJI OR THE PRODUCT THAT IS NOT EXPRESSLY STATED IN THESE TERMS. YOU
ASSUME ALL RISKS FOR ANY DAMAGE THAT MAY RESULT FROM YOUR USE OF OR ACCESS TO
THE PRODUCT, PRODUCT ACCESSORIES, AND ANY MATERIALS. YOU UNDERSTAND AND AGREE
THAT YOU USE THE PRODUCT AT YOUR OWN DISCRETION AND RISK, AND THAT YOU ARE SOLELY
RESPONSIBLE FOR ANY PERSONAL INJURY, DEATH, DAMAGE TO YOUR PROPERTY (INCLUDING
YOUR COMPUTER SYSTEM OR MOBILE DEVICE OR DJI HARDWARE USED IN CONNECTION WITH THE
PRODUCT) OR THIRD PARTY PROPERTY, OR THE LOSS OF DATA THAT RESULTS FROM YOUR USE OF
OR INABILITY TO USE THE PRODUCT.
SOME JURISDICTIONS MAY PROHIBIT A DISCLAIMER OF WARRANTIES AND YOU MAY HAVE OTHER
RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION.
DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as “DJI”) and its affiliated
companies. Names of products, brands, etc., appearing in this document are trademarks or registered
trademarks of their respective owner companies.
Limitation of Liability
IN NO EVENT WILL THE DJI ENTITIES BE LIABLE TO YOU FOR ANY INDIRECT, INCIDENTAL, SPECIAL,
CONSEQUENTIAL OR PUNITIVE DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
GOODWILL, OR ANY OTHER INTANGIBLE LOSS) ARISING OUT OF OR RELATING TO YOUR ACCESS
6
©
2017 DJI All Rights Reserved.
TO OR USE OF, OR YOUR INABILITY TO ACCESS OR USE, THE PRODUCT, PRODUCT ACCESSORIES,
OR ANY MATERIALS, FLIGHT ENVIRONMENT DATA, WHETHER BASED ON WARRANTY, CONTRACT,
TORT (INCLUDING NEGLIGENCE), STATUTE, OR ANY OTHER LEGAL THEORY, AND WHETHER OR NOT
ANY DJI ENTITY HAS BEEN INFORMED OF THE POSSIBILITY OF DAMAGE.
EXCEPT AS OTHERWISE AGREED UPON BETWEEN YOU AND DJI, THE AGGREGATE LIABILITY OF
THE DJI ENTITIES TO YOU FOR ALL CLAIMS ARISING OUT OF OR RELATING TO THE USE OF OR ANY
INABILITY TO USE ANY PORTION OF THE PRODUCT OR OTHERWISE UNDER THESE TERMS, WHETHER
IN CONTRACT, TORT, OR OTHERWISE, IS LIMITED TO $100.
Data Storage and Usage
When you use our mobile apps or our products or other software, you may provide DJI with data
regarding the use and operation of the product, such as flight telemetry data (e.g., speed, altitude,
battery life, and information about the gimbal and camera) and operations record. Please refer to DJI
Privacy Policy (available at dji.com/policy) for more information.
Compliance Information
FCC Warning Message
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In
order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the
antenna shall not be less than 20cm during normal operation.
IC RSS Warning
This device complies with Industry Canada licence-exempt RSS standard (s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
DJI reserves the right to update this Disclaimer and Safety Guidelines. Please visit http://www.dji.com and check your email
periodically for the latest version. This disclaimer is made in various language versions; in the event of divergence among
different versions, the English version shall prevail.
©
2017 DJI All Rights Reserved.
7
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence.
L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
IC Radiation Exposure Statement:
This equipment complies with IC RF radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body.
Any Changes or modications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
NCC Warning Message
低功率電波輻射性電機管理辦法
第十二條  經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更頻率、加大
功率或變更原設計之特性及功能。
第十四條  低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應改善至無干
擾時方得繼續使用。前項合法通信,指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或
工業、科學及醫療用電波輻射性電機設備之干擾。
KCC Warning Message
“해당무선설비는 운용 중 전파혼신 가능성이 있으므로 인명안전과 관련된 서비스는 할 수 없습니다 .”
“해당 무선설비는 운용 중 전파혼신 가능성이 있음”
EU Compliance Statement
EU Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device is in
compliance with the essential requirements and other relevant provisions of the Directive 2014/53/EU.
A copy of the EU Declaration of Conformity is available online at www.dji.com/euro-compliance
EU contact address: DJI GmbH, Industriestrasse. 12, 97618, Niederlauer, Germany
Declaración de cumplimiento UE: SZ DJI TECHNOLOGY CO., LTD. por la presente declara que este
dispositivo cumple los requisitos básicos y el resto de provisiones relevantes de la Directiva 2014/53/EU.
Hay disponible online una copia de la Declaración de conformidad UE en www.dji.com/euro-compliance
Dirección de contacto de la UE: DJI GmbH, Industriestrasse. 12, 97618, Niederlauer, Germany
EU-verklaring van overeenstemming: SZ DJI TECHNOLOGY CO., LTD. verklaart hierbij dat dit apparaat
voldoet aan de essentiële vereisten en andere relevante bepalingen van Richtlijn 2014/53/EU.
De EU-verklaring van overeenstemming is online beschikbaar op www.dji.com/euro-compliance
Contactadres EU: DJI GmbH, Industriestrasse. 12, 97618, Niederlauer, Germany
Declaração de conformidade da UE: A SZ DJI TECHNOLOGY CO., LTD. declara, através deste documento,
que este dispositivo está em conformidade com os requisitos essenciais e outras disposições relevantes
da Diretiva 2014/53/EU.
Existe uma cópia da Declaração de conformidade da UE disponível online em
www.dji.com/euro-compliance
Endereço de contacto na UE: DJI GmbH, Industriestrasse. 12, 97618, Niederlauer, Germany
Dichiarazione di conformità UE: SZ DJI TECHNOLOGY CO., LTD. dichiara che il presente dispositivo è
conforme ai requisiti essenziali e alle altre disposizioni rilevanti della direttiva 2014/53/EU.
Una copia della dichiarazione di conformità UE è disponibile online all'indirizzo Web
www.dji.com/euro-compliance
Indirizzo di contatto UE: DJI GmbH, Industriestrasse. 12, 97618, Niederlauer, Germany
Déclaration de conformité UE: Par la présente, SZ DJI TECHNOLOGY CO., LTD déclare que cet appareil est
8
©
2017 DJI All Rights Reserved.
conforme aux principales exigences et autres clauses pertinentes de la directive européenne 2014/53/EU.
Une copie de la déclaration de conformité UE est disponible sur le site www.dji.com/euro-compliance
Adresse de contact pour l'UE : DJI GmbH, Industriestrasse. 12, 97618, Niederlauer, Germany
EU-Compliance: Hiermit erklärt SZ DJI TECHNOLOGY CO., LTD., dass dieses Gerät den wesentlichen
Anforderungen und anderen einschlägigen Bestimmungen der EU-Richtlinie 2014/53/EU entspricht.
Eine Kopie der EU-Konformitätserklärung nden Sie online auf www.dji.com/euro-compliance.
Kontaktadresse innerhalb der EU: DJI GmbH, Industriestrasse. 12, 97618, Niederlauer, Germany
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF
USED BATTERIES ACCORDING TO THE INSTRUCTIONS
Environmentally friendly disposal
Old electrical appliances must not be disposed of together with the residual waste, but have to be
disposed of separately. The disposal at the communal collecting point via private persons is for free.
The owner of old appliances is responsible to bring the appliances to these collecting points or to
similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and
the treatment of toxic substances.
©
2017 DJI All Rights Reserved.
9
Before You Begin
The following documents have been produced to help you safely operate and make full use of your
Matrice 600:
Matrice 600 In the Box
Matrice 600 Disclaimer and Safety Guidelines
Matrice 600 Quick Start Guide
Matrice 600 Intelligent Flight Battery Safety Guidelines
Matrice 600 User Manual
Check to see that you have all of the components listed in the
Matrice 600 In the Box
document. Before
assembly, read the
Matrice 600 Disclaimer and Safety Guidelines
. Get prepared using the
Matrice 600
Quick Start Guide
. Complete the assembly with the help of the
Matrice 600 User Manual
and the video
tutorial on the DJI website (http://www.dji.com). For more information, please refer to the
Matrice 600
User Manual
available on the DJI website. Make sure you fully understand the functionality of each
individual part, the ight condition requirements, the key contingency warning functions/systems, and all
government regulations before each ight. If you have any questions or problems during the assembly,
maintenance or use of this product, please contact DJI or a DJI authorized dealer.
Individual Parts
Regarding Genuine and Functional Parts
To avoid component malfunction, serious injury, and property damage, observe the following rules:
1.
Use only genuine DJI parts or parts certified by DJI. Unauthorized parts or parts from non-DJI
certied manufacturers may cause system malfunctions and compromise safety.
2.
Ensure there are no foreign objects (such as water, oil, soil, sand, etc.) inside of the aircraft or its
components.
3.
Ensure the aircraft and its components-including but not limited to the remote controller, ight
controller, Lightbridge
2 Air System, landing gear, GPS, compass, propulsion system, and batteries-
are all in good working order, damage-free, and functioning well. Refer to the remaining sections in
this document for more details on how to ensure the functionality of these components.
4.
DO NOT remove parts that come with the aircraft-including but not limited to the ight controller,
power management unit, and Lightbridge 2 Air System-for other uses. DO NOT replace any of them
with other parts.
Remote Controller
1. Ensure the remote controller is fully charged before each ight.
2. If the remote controller is powered on and has NOT been used for 5 minutes, it will sound an alert. After 10
minutes it will automatically power off. Move the sticks or perform some other action to cancel the alert.
3. Adjust the clamp of the mobile device holder to allow a rm grip on your mobile device.
4. Ensure the mobile device holder is rmly in place and does not slip.
5. Ensure the antennas of the remote controller are unfolded and adjusted to the proper position to achieve
optimal transmission quality.
6. Repair or replace the remote controller if damaged. A damaged remote controller antenna will greatly
decrease performance.
10
©
2017 DJI All Rights Reserved.
7. For the GPS in the remote controller to function properly and the Home Point to be accurate, ensure the
DJI logo is facing the sky and keep the remote controller away from any metal objects.
8. Linking is required if you wish to replace your remote controller or receiver or add a new remote controller.
Refer to the User Manual for details.
Center Frame
To avoid component malfunction, serious injury, and property damage, observe the following rules:
1.
DO NOT short out the reserved ports on the center frame.
2.
There are two DC18V power ports and one LIPO-6S power port reserved on the center frame. The
DC18V power ports have an output voltage of 18 V and a maximum output current of 3 A. The
LIPO-6S power port has the same output voltage as the Intelligent Flight Battery and a maximum
output current of 10 A. Use the power ports in strict accordance with their specications.
3.
DO NOT damage the cables when mounting or removing the upper or lower plate of the center frame.
Retractable Modules
To avoid component malfunction, serious injury, and property damage, observe the following rules:
1.
DO NOT interchange the mounting positions of the left and right retractable modules. Identify the
left retractable module by locating the integrated control board.
2.
DO NOT interchange the cabling of the left and right retractable modules, or else the landing gear
will not function normally.
3.
Arrange the cables neatly to avoid them from being cut by the frame edges.
Landing Gear
To avoid component malfunction, serious injury, and property damage, observe the following rules:
1.
The antennas are attached to the landing gear legs upon delivery. DO NOT move the antennas.
2.
Before mounting the landing gear legs, pull out the antenna connector pins.
3.
Be careful not to damage the antenna cables when mounting or removing the landing gear.
4.
Watch your ngers when mounting the springs to the landing gear.
5.
Ensure the landing gear is lowered before landing.
Flight Control System
To avoid component malfunction, serious injury, and property damage, observe the following rules:
Flight Controller
1.
DO NOT attempt to modify the structure of the ight controller.
2.
DO NOT change the mounting position and orientation of the ight controller.
3.
DO NOT short out the ports on the ight controller.
©
2017 DJI All Rights Reserved.
11
4.
Connect cables in strict accordance with port descriptions.
5.
The recommended storage temperature is -20° to 50°C (-4° to 122° F).
Power Management Unit (PMU)
1.
The PMU has an input voltage range of 10.5-51 V (3-12S battery equivalent), output voltage of 9 V
and maximum output current of 2 A. Be sure to use the PMU in strict accordance with these
specications.
2.
Only use the power cable extending from the center frame to supply power to the PMU.
3.
The recommended storage temperature is -20° to 50°C (-4° to 122° F).
Flight Controller
1. The ight controller is neither waterproof nor oil-proof.
2. Check regularly to ensure the ight controller is rmly secured.
3. DO NOT place devices producing heat near the ight controller.
PMU
1. DO NOT block or cover the PMU to maximize heat dissipation and system performance.
Lightbridge 2 Air System
To avoid component malfunction, serious injury, and property damage, observe the following rules:
1.
Install the antennas before powering on the Air System.
2.
ONLY use the DBUS cable that comes with the Matrice 600, or else the Lightbridge 2 Air System will
not function normally.
GPS-Compass Pro
To avoid component malfunction, serious injury, and property damage, make sure:
1.
GPS-Compass Pro’s collapsible mount is unfolded and the extension rod is securely mounted
before each ight.
2.
GPS-Compass Pro is securely mounted and the arrow is pointing towards the nose of the aircraft.
3.
Settings in the DJI Assistant 2 are correct.
To avoid possible serious injury and property damage, observe the following rule:
1. Land immediately when severe drifting occurs in ight, i.e., the aircraft does NOT y in straight lines.
12
©
2017 DJI All Rights Reserved.
GPS
1. Avoid catching your ngers in the collapsible mount of the GPS-Compass Pro.
2. Separate the GPS-Compass Pro from the body of the aircraft using the extension rod.
3. Fly in open areas. Tall buildings or steel structures may block the GPS signal and affect the accuracy of
the on-board compass.
Compass
1. Ensure that the compass is calibrated before your rst ight.
2. DO NOT calibrate your compass where there is a chance of strong magnetic interference, such as
magnetite, parking structures, and steel reinforcements underground.
3. DO NOT carry ferromagnetic materials with you during calibration such as cellular phones.
4. The DJI GO app will prompt you to resolve the compass issue if the compass is affected by strong
interference after calibration is complete. Follow the prompted instructions to resolve the compass issue.
Propulsion System
To avoid serious injury to yourself or others, which may be caused by the rotating propellers and
motors, observe the following rules:
Propellers
1.
DO NOT use aged, chipped, or broken propellers.
2.
Always power off the aircraft before touching the propellers.
3.
Be aware of the sharp edges of the propellers when mounting or removing the propellers. Wear
gloves or take other protective measures when touching the propellers.
4.
Ensure that the propellers are securely mounted to prevent them from falling off the motors.
5.
Ensure that the propellers are unfolded before each ight.
6.
DO NOT turn on the motors when propellers are mounted and there are other people or animals in
the immediate vicinity.
Motors
1.
Ensure that the motors are securely mounted and rotating smoothly.
2.
DO NOT attempt to modify the structure of the motors.
3.
DO NOT touch or let your hands or body come in contact with the motors after ight as they may
be hot.
To avoid possible serious injury and property damage, observe the following rule
:
1. DO NOT block any of the ventilation holes on the motors.
©
2017 DJI All Rights Reserved.
13
Motors
1. Keep the motors free of dust.
2. If a motor is stuck and unable to rotate freely, execute the CSC (Combination Stick Command) to stop the
motors immediately.
3. Ensure the motors sound a normal tune when powered on.
DJI GO App
1. Be sure to fully charge your tablet or mobile device before launching the DJI GO app. A tablet is
recommended for a better user experience.
2. If you are using a phone as your mobile display device, be sure to continue ying safely when the phone
receives an incoming call. DO NOT accept phone calls during ight.
3. Read all prompted safety tips, warning messages, and disclaimers carefully. Be familiar with the related
regulations in your area. You are solely responsible for being aware of all relevant regulations and ying in
a way that is compliant. Read and understand the warning messages before:
a. Using the Auto-take off and Auto-landing features.
b. Re-setting your Home Point.
c. Setting the altitude beyond the default limit.
d. Switching between ight modes.
4. Land your aircraft immediately if there is an alert shown in the app.
5. Examine and check all warning messages on the checklist displayed in the app prior to each ight.
6. Use the in-app simulator to practice your ight skills if you have never operated the aircraft or if you do not
have sufcient experience to be comfortable operating the aircraft.
7. Beginner Mode is enabled by default when you launch the DJI GO app for the rst time. The aircraft’s
altitude and ight distance is restricted when ying in Beginner Mode. We recommend you y in Beginner
Mode to perfect your ight skills. Operate the actual aircraft only after you are condent that you have
mastered adequate ight skills.
8. Cache the map data of the area where you intend to y the aircraft by connecting to the Internet before
each ight.
Firmware
To avoid serious injury to children and animals, observe the following rule:
1.
Keep children and animals at a safe distance during any rmware upgrade, system calibration, and
parameter setting procedures.
14
©
2017 DJI All Rights Reserved.
1. For safety, always update the rmware to the latest version when an upgrade notication is shown in the
DJI GO app.
2. Firmware upgrade notications will inform about new rmware upgrades. You are required to read and
understand the information shown. You further understand and agree that the data including but not
limited to ight telemetry data and user selection records may be uploaded to and maintained on a DJI-
designated server.
3. Only use ofcial DJI rmware.
4. Be sure to update the remote controller’s firmware to the latest version after you update the aircraft’s
rmware.
5. The remote controller may become unlinked from the aircraft after updating. Re-link the remote controller
and aircraft.
Product Care
Storage and Transportation
To avoid serious injury to children and animals, observe the following rules:
1.
Small parts, such as cables and straps, are dangerous if swallowed. Keep all parts out of reach of
children and animals.
2.
Remove the Intelligent Flight Batteries during transportation.
3.
Remove the gimbal from the aircraft during transportation or when storing for an extended period.
1. Store the Intelligent Flight Battery and remote controller in a cool, dry place away from direct sunlight to
ensure that the built-in LiPo battery does NOT overheat. Recommended storage temperature: between
22° and 28°C (71° and 82° F) for storage periods of more than three months. Never store in environments
outside the temperature range of -20° to 45° C (-4° to 113° F).
Maintenance and Upkeep
1. Inspect the aircraft every 50 ights, or after ying for over 20 hours, in order to keep the aircraft working
properly.
2. Check every part of the aircraft after any crash or violent impact. If you have any problems or questions,
please contact a DJI authorized dealer.
3. Regularly check the Battery Level Indicators to see the current battery level and overall battery life. When
the battery life reaches 0%, it can no longer be used.
©
2017 DJI All Rights Reserved.
15
Flight Condition Requirements
Weather Conditions and Surrounding Environment
The aircraft is designed to operate in good to moderate weather conditions. To avoid collision, serious
injury and property damage, observe the following rules:
1.
DO NOT use the aircraft in severe weather conditions. These include wind speeds exceeding 8 m/s,
snow, rain, smog, heavy wind, hail, lightning, tornadoes or hurricanes.
2.
Keep the aircraft at least 10 meters (30 feet) away from obstacles, people, animals, buildings, public
infrastructure, trees, and bodies of water when in ight. Stay even further away from the above
objects as your altitude increases.
3.
Be EXTRA cautious when operating the aircraft indoors.
1. Aircraft and battery performance is subject to environmental factors such as air density and temperature.
a. Be very careful when ying 8,202 feet (2,500 meters) or more above sea level as battery and aircraft
performance may be reduced.
2. DO NOT use the aircraft near accidents, fire, explosions, floods, tsunamis, avalanches, landslides,
earthquakes, dust, or sandstorms.
Interference with Flight Controller and Communications
1. Fly in open areas. Tall buildings or steel structures may affect the accuracy of the on-board compass and
block the GPS signal.
2. Avoid interference between the remote controller and other wireless equipment. Make sure to turn off the
Wi-Fi on your mobile device.
3. DO NOT y near areas with magnetic or radio interference. These include but are NOT limited to: high
voltage lines, large scale power transmission stations or mobile base stations and broadcasting towers.
Failing to do so may compromise the transmission quality of this product or cause remote controller and
video transmission errors which may affect flight orientation and location accuracy. The aircraft may
behave abnormally or go out of control in areas with too much interference.
Operating the Aircraft Responsibly
To avoid serious injury and property damage, observe the following rules:
1.
Make sure you are NOT drunk, taking drugs, under the inuence of anesthesia, or suffering from
dizziness, fatigue, nausea or any other conditions, whether physical or mental, that could impair
your ability to operate the aircraft safely.
2.
Never stop the motors mid-ight unless in emergency situations when doing so can reduce the
risk of damage or injury.
16
©
2017 DJI All Rights Reserved.
3.
Upon landing, power off the aircraft rst, then power off the remote controller.
4.
DO NOT drop, launch, re or otherwise project any dangerous payloads on or at any buildings,
persons or animals, or which could cause personal injury or property damage.
1. Make sure you have been sufficiently trained and are fully aware of any contingency plans before
accidents happen.
2. Make sure you have a ight plan and never y the aircraft recklessly.
3. Respect the privacy of others when using the camera. Make sure you comply with local privacy laws,
regulations, and moral standards.
4. DO NOT use this product for any reason other than general personal use. DO NOT use it for any illegal or
inappropriate purpose (such as spying, military operations, or unauthorized investigations).
5. DO NOT use this product to defame, abuse, harass, stalk, threaten or otherwise violate the legal rights (such
as the right of privacy and publicity) of others.
6. DO NOT trespass into private property of others.
©
2017 DJI All Rights Reserved.
17
Flight Modes, Functions and Warnings
Flight Modes
To avoid serious injury and property damage, observe the following rules:
1.
DO NOT switch from P-mode to either A-mode or F-mode unless you are sufciently familiar with
the aircraft’s behavior for each ight mode, since disabling GPS may result in being unable to y
the aircraft safely.
2.
The aircraft will enter A-mode in the following two instances:
a. Passive: When there is weak GPS signal or when the compass experiences interference.
b. Active: Users toggle the ight mode switch to A-mode.
In A-mode, some advanced features are disabled. Therefore, the aircraft cannot position in this
mode and is easily affected by its surroundings, which may result in horizontal shifting. Use the
remote controller to position the aircraft.
Maneuvering the aircraft in A-mode can be difcult. Before switching the aircraft into A-mode,
make sure you are comfortable ying in this mode. DO NOT y the aircraft too far away as you
might lose control and cause a potential hazard.
Avoid ying in areas where GPS signal is weak, or in conned spaces. The aircraft will otherwise
be forced to enter A-mode, leading to potential ight hazards, please land it in a safe place as
soon as possible.
P-mode is preferred for most flying scenarios. Users can switch to A-mode where and when P-mode is
unavailable. Be aware that some features are NOT available for A-mode, and therefore be EXTRA cautious
when ying in A-mode.
1. P-mode (Positioning): P-mode works best when the GPS signal is strong. There are different states of
P-mode, which will be automatically selected by the Matrice 600 depending on GPS signal strength:
a. P-GPS: GPS is available, and the aircraft is using GPS for positioning.
b. P-ATTI: When GPS is not available, the aircraft is using only its barometer for positioning, so only
altitude is controlled.
2. A-mode (Attitude): The GPS is NOT used for positioning. The aircraft only uses its barometer to maintain
altitude. If it is still receiving a GPS signal, the aircraft can automatically return home if the Remote
Controller signal is lost and if the Home Point has been recorded successfully.
3. F-mode (Function): Intelligent Flight is activated in this mode. Ensure you are familiar with Intelligent Flight
functions before use.
If you intend to switch to modes that disable GPS assistance (e.g., A-mode), you are required to accept the
prompted disclaimer to enable this function. If this function is enabled, you further understand and agree
that data including but not limited to ight telemetry data and function records could be uploaded to and
maintained on a DJI-designated server.
18
©
2017 DJI All Rights Reserved.
Failsafe and Return-to-Home
1. The Return-to-Home feature will NOT work if the GPS signal is insufcient or if GPS is not active.
2. Press the RTH (Return-to-Home) button on the remote controller to bring the aircraft back to the Home
Point instead of turning off the remote controller.
3. Tall buildings may adversely affect the RTH procedure. Please adjust the aircraft location, altitude and
speed while returning home to avoid obstacles.
4. Make sure to always y the aircraft within the transmission range of the remote controller.
5. When updating the Home Point, do NOT block the GPS signal of the remote controller and ensure the new
Home Point is correct on the live map.
6. Only use the Return-to-Home functions in case of emergency, as they may be affected by the weather,
the environment, or any nearby magnetic elds.
7. DO NOT update the Home Point near tall buildings, as the GPS may be blocked and lead to an incorrect
location being stored.
8. The aircraft cannot avoid obstacles during the Failsafe RTH; therefore it is important to set an appropriate
Failsafe altitude before each ight.
Low Battery
1. When the Critical Battery Level Warning activates and the aircraft is descending automatically, you may
push the throttle up to maintain the aircraft's altitude and navigate it to a more appropriate location for
landing.
2. When battery warnings are triggered, promptly bring the aircraft back to the Home Point or land to avoid
losing power during ight and causing damage to the aircraft, property, animals, and people.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23

dji Go Guida utente

Tipo
Guida utente
Questo manuale è adatto anche per

in altre lingue