Triton Systems FT5000XP Series Manuale del proprietario

MODEL RL/FT5000

XP

PC-BASED ATMS

USER MANUAL

VERSION 2.0

TDN 07102-00057B Oct 23 2009

CORPORATE HEADQUARTERS:

21405 B Street

Long Beach, MS 39560

Phone: (228) 575-3188

Fax: (228) 575-3200

COPYRIGHT NOTICE

of Delaware, Inc. is an operating company of Dover Electronics, Inc., a subsid-

iary of Dover Corporation (NYSE-DOV). DOVER, the DOVER logo and the

Dover family of marks and TRITON, the TRITON logo and the Triton family

of marks are registered trademarks of Delaware Capital Formation, Inc., a wholly

owned subsidiary of Dover Corporation.

ii

MODEL RL/FT5000

XP

USER MANUAL

DISCLAIMER

The manufacturer of the Automated Teller Machine (ATM) product(s) described

herein makes no representations or warranties, either expressed or implied, by or

with respect to anything in this manual, and shall not be liable for any implied

warranties of fitness for a particular purpose or for any indirect, special, or

consequential damages. Information in this document is subject to change

without notice and does not represent a commitment on the part of the

manufacturer.

FCC COMPLIANCE

(US units with modems)

Statement of Compliance: This equipment complies with Part 68 of the FCC

rules. Located in the control area of the ATM is the product label. This label

lists the FCC registration number and ringer equivalence number of the unit. If

requested, this information must be provided to the telephone company. USOC/

FIC Codes: When ordering service from the telephone company for the XP-

series ATMs, the following information should be supplied:

Universal Service Order Code (USOC): RJ-11C

The Facility Interface Code (FIC): 02LS2

Plug and Jack: The plug and jack used to connect this equipment to premise

wiring and telephone network must comply with the applicable FCC Part 68 rules

and requirements adopted by ACTA. A compliant telephone cord and modular

plug is provided with this product. The telephone cord is designed to be

connected to a compatible modular jack that is also compliant.

Ringer Equivalent Number (REN): The REN is used to determine the number of

the devices that may be connected to a telephone line. Excessive RENs on a

telephone line may result in the devices not ringing in response to an incoming

call. In most but not all areas, the sum of the RENs should not exceed five (5). To

be certain of the number devices that may be connected to a line, as determined

by the local RENs, contact the local telephone company.

** CAUTION **

Changes or modifications not expressly approved by Triton

Systems could void the regulatory compliance approval

and the warranty. Use of this product in a manner other

than those described in this manual may result in personal

injury!

iii

MODEL RL/FT5000

XP

USER MANUAL

Repairs and Returns: If telecom compatibility trouble is experienced with the

XP- series ATMs, you may contact for repairs and warranty information: Triton

at 1-228-868-1317

Triton Systems of Delaware, Inc.

522 East Railroad Street

Long Beach, MS 39560

If the equipment is causing harm to the network, the telephone company may

request that you disconnect the equipment until the problem is resolved. Repairs

should be made only by qualified factory representatives.

Party Lines: The XP-series ATMs must not be used on party lines.

Alarm Equipment: The XP-series ATMs should have their own dedicated phone

line. Do not install the ATMs on the same line as alarm equipment.

Electrical Safety Advisory: Telephone companies report that electrical surges,

typically lightening transients, are very destructive to customer equipment

connected to AC power sources. This has been identified as a major nationwide

problem. A commercially available, power surge suppressor, is recommended

for use with the XP-series ATMs to minimize damage in the event of an electrical

surge.

CANADIAN IC COMPLIANCE

Notice:

The Industry Canada label identifies certified equipment. This certification

means that the equipment meets telecommunications network protective, opera-

tional, and safety requirements as prescribed in the appropriate terminal equip-

ment technical requirements document(s). The department does not guarantee

the equipment will operate to the user’s satisfaction.

Notification of Changes in Telephone Company Equipment: The telephone

company may make changes in its facilities, equipment, operations, or procedures

that could affect the operation of the equipment. If this happens, the telephone

company will provide advanced notice in order for you to make necessary

modifications to maintain uninterrupted service.

Harm to the Network: If the XP-series ATMs cause harm to the telephone

network, the telephone company will notify the customer that a temporary

discontinuation of service may be required. If advanced notice is not possible,

the telephone company will notify the customer as soon as possible. You will be

advised of your right to file a complaint with the FCC if you believe it’s necessary.

iv

MODEL RL/FT5000

XP

USER MANUAL

Users should ensure for their own protection that the electrical ground connec-

tions of the power utility, telephone lines and internal metallic water pipe sys-

tem, if present, are connected together. This precaution may be particularly

important in rural areas. Caution: Users should not attempt to make such con-

nections themselves, but should contact the appropriate electric inspection

authority or electrician, as appropriate.

NOTICE:

The Ringer Equivalence Number (REN) assigned to each terminal device pro-

vides an indication of the maximum number of terminals allowed to be connected

to a telephone interface. The termination on an interface may consist of any

combination of devices subject only to the requirement that the sum of the

Ringer Equivalence Numbers of all the devices does not exceed 5.

AVIS:

L’étiquette d’Industrie Canada identific le matériel homologué. Cette étiquette

certifie que le matériel est conforme aux normes de protection, d’exploitation et

de sécurité des réseaux de télécommunications, comme le prescrivent les docu-

ments concernant les exigences techniques relatives au matériel terminal. Le

Ministère n’assure toutefois pas que le matériel fonctionnera à la satisfaction de

l’utilisateur.

Avant d’installer ce matériel, l’utilisateur doit s’assurer qu’il est permis de le

raccorder aux installations de 1’entreprise locale de télécommunication. Le

matériel doit également être installé en suivant une méthode acceptée de

raccordement. L’abonné ne doit pas oublier qu’il est possible que la comformité

aux conditions énoncées cidessus n’empêche pas la dégradation du service

dans certaines situations.

Before installing this equipment, users should ensure that it is permissible to be

connected to the facilities of the local telecommunications company. The equip-

ment must also be installed using an acceptable method of connection. The

customer should be aware that compliance with the above conditions may not

prevent degradation of service in some situations.

Repairs to certified equipment should be coordinated by a representative desig-

nated by the supplier. Any repairs or alterations made by the user to this

equipment or equipment malfunctions may give the telecommunications com-

pany cause to request the user to disconnect the equipment.

v

MODEL RL/FT5000

XP

USER MANUAL

AVIS:

UNITED KINGDOM

This equipment has been approved in accordance with Council Decision 98/

482/EC for pan-European single terminal connection to the Public Switched

Telephone Network (PSTN). However, due to differences between the indi-

vidual PSTNs provided in the different countries, the approval does not, of

itself, give unconditional assurance of successful operation on every PSTN

network termination point. In the event of problems, contact your equipment

supplier in the first instance. This unit uses only Dual-Tone Multi-Frequency

(DTMF) address signaling.

EMISSIONS (EMI)

(US Requirements)

This device complies with Part 15 of the FCC rules. Operation is subject to the

following two (2) conditions:

1) This device may not cause harmful interference.

2) This device must accept any interference received, including interference

that may cause undesired operation.

Les réparations de matériel homologué doivent être coordonnées par un

représentant désigné par le fournisseur. L’entreprise de télécommunications

peut demander à I’utilisateur de débrancher un appareil à la suite de réparations

ou de modifications effectuées par l’utilisateur ou à cause de mauvais

fonctionnement.

Pour sa propre protection, l’utilisateur doit s’assurer que tous les fils de mise à

la terre de la source d’énergie électrique, des lignes téléphoniques et des

canalisations d’eau métalliques, s’fl y en a, sont raccordés ensemble. Cette

précaution est particulièrement importante dans les régions rurales.

Avertissement: L’utilisateur ne doit pas tenter de faire ces raccordements lui-

même; il doit avoir recours à an service d’inspection des installations électriques,

ou à un électricien, selon le cas.

L’indice d’équivalence de la sonnerie (IES) assigné à chaque dispositif terminal

indique le nombre maximal de terminaux qui peuvent étre raccordés à une interface.

La terminaison d’une interface téléphonique peut consister en une combinaison de

quelques dispositifs, à la seule condition que la somme d’indices d’équivalence de

la sonnerie de tous les dispositifs n’exède pas 5.

vi

MODEL RL/FT5000

XP

USER MANUAL

Le present appareil numerique n’emet pas de bruits radioelectriques depassant

les limites applicables aux appareils numeriques de la Class A prescrites dans le

Reglement sur le brouillage radioelectrique edicte par le ministere des

Communications du Canada. Cet appareil numerique de la classe A est conforme

a la norme NMB-003 Canada.

CANADIAN REQUIREMENTS

This digital apparatus does not exceed the Class A limits for radio noise emissions

from digital apparatus set in the Radio Interference Regulations of the Canadian

Department of Communications. This Class A digital apparatus complies with

Canadian ICES-003.

NOTE:

This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of FCC rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment

is operated in a commercial environment. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and used in accordance

with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to

cause harmful interference in which case the user will be required to correct the

interference at his own expense. Changes or modifications to this unit not

expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

UK REQUIREMENTS

Warning:

This is a Class A product. In a domestic environment, this product may cause

radio interference in which case the user may be required to take adequate

measures.

vii

MODEL RL/FT5000

XP

USER MANUAL

NOTICES

This publication is protected by copyright and all rights are reserved. No part of

it may be reproduced or transmitted by any means or in any form, without prior

consent in writing from Triton Systems of Delaware, Inc.

The information in this publication has been carefully checked and is believed

to be accurate. However, Triton Systems of Delaware, Inc. assumes no respon-

sibility for any inaccuracies, errors, or omissions that may be contained in this

document. In no event will Triton Systems of Delaware, Inc. be liable for direct,

indirect, special, incidental, or consequential damages resulting from any defect

or omission in this manual, even if advised of the possibility of such damages.

In the interest of continued product development, Triton Systems of Delaware,

Inc. reserves the right to make improvements in its documentation and the

products it describes at any time, without notice or obligation.

TRADEMARK ACKNOWLEDGEMENTS

Microsoft Windows is a registered trademark of Microsoft Corporation in the

United States and/or other countries. Triton Connect and Prism are trademarks

of Triton Systems of Delaware, Inc. CashWorks is a trademark of CashWorks,Inc.

PaySpot is a trademark of Euronet Worldwide. Western Union is a registered

trademark of Western Union Holdings, Inc. Intel is a registered trademark of

Intel Corporation.

viii

MODEL RL/FT5000

XP

USER MANUAL

DEFENSE OF INFRINGEMENT CLAIMS

If notified promptly in writing of any action (and all prior claims relating to such

action) brought against the Distributor based on a claim that Distributor’s use of

the goods infringes a patent or other intellectual property right, and if given

access by Distributor to any information distributor has regarding such alleged

infringement, Manufacturer agrees to defend Distributor in such action at its

expense and will pay any costs or damages finally awarded against Distributor

Distributor’s sole and exclusive remedy in the event of defect is expressly

limited to the replacement or correction of such defective parts by manufac-

turer at its election and sole expense, except there shall be no obligation to

replace or repair items which, by their nature, are expendable. If Manufacturer

is unable to replace or repair the defective parts, Manufacturer shall refund to

Distributor that portion of the purchase price allocable pays to such goods.

No representation or other affirmation of fact not set forth herein, including but

not limited to statements regarding capacity, suitability for use, or performance

of the goods, shall be or be deemed to be a warranty or representation by

Manufacturer for any purpose, nor give rise to any liability or obligation of

Manufacturer whatever.

Except as specifically provided in this document, there are no other warranties

expressed or implied including, but not limited to, any implied warranties or

merchantability or fitness for a particular purchase.

LIMITATION OF LIABILITY

In no event shall manufacturer be liable for loss of profits or incidental, indi-

rect, special, consequential or other similar damages arising out of any breach

of this contract or obligations under this contract.

WARRANTY STATEMENT

Manufacturer warrants that the products delivered to a distributor will perform

in accordance with the Manufacturer’s published specifications for thirteen

months from date of shipment in Long Beach, MS.

Manufacturer’s warranty shall not apply to any damage resulting from abuse,

negligence, accident, or to any loss or damage to the products while in transit.

Written notice and explanation of circumstances surrounding any claims that

the goods have proved defective in material or workmanship shall be given

promptly from the distributor to the manufacturer. No claim may be made, or

action brought, by or through a distributor after the expiration of 14 months

following any alleged breach of warranty.

ix

MODEL RL/FT5000

XP

USER MANUAL

INTERPRETATION AND OTHER PAROLE EVIDENCE

This writing is intended by the parties as final expression of their agreement and

is intended also as a complete and exclusive statement of the terms of their

agreement. No course of prior dealing between the parties and no usage of the

trade shall be relevant to supplement or explain any term used in these terms and

conditions. Acceptance or acquiescence in a course of performance rendered

under these terms and conditions shall not be relevant to determine the meaning

of these terms and conditions even though the accepting or acquiescing party

has knowledge of the performance and opportunity for objection. Whenever a

term defined by the Uniform Commercial Code, as adopted in Mississippi, is

used in these terms and conditions, the definition contained in the code is to

control.

Manufacturer shall not have any liability to the Distributor under any provision

of this clause if any infringement, or claim thereof, is based upon: (i) the use of

the goods in combination with other goods or devices which are not made by

Manufacturer; (ii) the use of the goods in practicing any process; (iii) the fur-

nishing to the Distributor of any information, date, service, or applications as-

sistance; or (iv) the use of the goods with modifications made by the Distributor.

The Distributor shall hold Manufacturer harmless against any expense, judg-

ment or loss for infringement of any patent or other intellectual property right

which results from Manufacturer’s compliance with the Distributor’s designs,

specifications or instructions. No costs or expenses shall be incurred for the

account of Manufacturer without the written consent of Manufacturer. The

foregoing states the entire liability of manufacturer with respect to infringe-

ment of patents or other intellectual property right by the goods or any part

thereof, or by their operation.

In the event that a final injunction shall be obtained against the Distributor’s use

of the goods or any of their parts by reason of infringement of a patent or other

intellectual property right or if in Manufacturer’s opinion the goods are likely to

become the subject of a claim of infringement of a patent or other intellectual

property right, Manufacturer will, at its option and at its expense, either procure

for the Distributor the right to continue using the goods, replace or modify the

same so they become non-infringing or grant the Distributor a credit for such

goods as depreciated and accept their return. The depreciation shall be an equal

amount per year over the lifetime of the goods as established by Manufacturer.

in any such action, provided the Manufacturer shall have had sole control of the

defense of any such action and all negotiations for its settlement or compro-

mise.

x

MODEL RL/FT5000

XP

USER MANUAL

WAIVER INEFFECTIVE

No claim or right arising out of or relating to a breach of these terms and condi-

tions can be discharged in whole or in part by a waiver or renunciation of the

claim or right unless the waiver or renunciation is supported by consideration

and is in writing signed by the aggrieved party. Waiver by either Manufacturer

or Distributor of a breach by the other of any provision of these terms and

conditions shall not be deemed a waiver of future compliance therewith, and

such provisions shall remain in full force and effect.

STATUTE OF LIMITATIONS

Any action by the Distributor or Manufacturer for breach of these terms and

conditions must be commenced within one (1) year after the cause of action has

accrued.

APPLICABLE LAW

These terms and conditions shall be governed by and construed in accordance

with the provisions of the Uniform Commercial Code as adopted by the State of

Mississippi.

BANKRUPTCY

In the event of any proceedings, voluntary or involuntary, in bankruptcy or

insolvency by or against Distributor, or in the event of the appointment, with or

without the Distributor’s consent, of an assignee for the benefit of creditors or

of a receiver or of a liquidator, then Manufacturer shall be entitled to cancel any

unfilled part of these terms and conditions without any liability whatsoever.

PARTS ONLY LIMITED MANUFACTURER’S WARRANTY

Triton Systems of Delaware, Inc. warrants the components of each XP-series

ATM, excluding software and related documentation, against any defect in

materials and/or workmanship for a period of 13 months from the shipping date.

If a component fails due to defects in materials and/or workmanship within the

warranty period, Triton will furnish a new or refurbished component, at its dis-

cretion. Triton shall not be responsible for labor or other costs associated with

installing the components and the failed component shall be returned to Triton

at the purchaser’s expense. Triton shall not be responsible for misuse or abuse

of a unit and any attempts to remove or deface the serial number or date code on

a unit or any component thereof, or any attempt to repair a unit or to repair or

replace any component by anyone other than a service technician authorized by

Triton shall void this warranty.

MODIFICATIONS

These terms and conditions can be modified or rescinded only by writing signed

by both the parties or their duly authorized agents.

xi

MODEL RL/FT5000

XP

USER MANUAL

Limited Warranty covers normal use. Triton does not warrant or cover

damage:

• occurring during shipment of the equipment or components from or to

Triton’s facilities;

• caused by accident, impact with other objects, dropping, falls, spilled liq-

uids, or immersion in liquids;

• caused by a disaster such as fire, flood, wind, earthquake, lightning, or

other acts of God;

• caused by failure to provide a suitable installation environment for the

equipment, including but not limited to, faulty wiring in the building in

which the equipment is installed, installation in a facility with uncontrolled

environmental conditions, failure to provide a dedicated electrical circuit on

which the equipment operates, and/or lack of proper earth grounding for

the equipment;

• caused by the use of the equipment for purposes other than those for

which it was designed;

• resulting from improper maintenance;

• caused by any other abuse, misuse, mishandling, or misapplication.

Under no circumstances shall Triton or its suppliers be liable for any special,

incidental, or consequential damages based upon breach of warranty, breach of

contract, negligence, strict liability, or any other legal theory. Such damages

include, but are not limited to, loss of profits, loss of revenue, loss of data, loss

of use of the equipment or any associated equipment, cost of capital, cost of

substitute or replacement equipment, facilities or services, downtime, purchaser’s

time, the claims of third parties, including customers, and injury to property.

DISCLAIMER OF WARRANTIES

The warranty stated above is the only warranty applicable to this product. All

other warranties, expressed or implied (including all implied warranties of mer-

chantability or fitness for a particular purpose or quality of service), are hereby

disclaimed. No oral or written information, or advice given by Triton, its agents

or employees shall create a warranty or in any way increase the scope of this

warranty.

SHIPPING DAMAGE

All equipment is shipped Free On Board (FOB), Triton’s facilities. The organiza-

tion or individual who has purchased the equipment assumes responsibility for

the equipment once it leaves Triton’s facilities.

Should your equipment be damaged in the process of shipment or delivery to

your place of destination, we recommend the following course of action:

xii

MODEL RL/FT5000

XP

USER MANUAL

• Take photographs of the damaged packaging prior to opening the boxes. If

this is not possible, make note of key points, such as whether the equip-

ment is on a pallet, if the banding is intact, how the boxes are damaged, etc.

Keep all of the packaging for inspection by the shipping company.

• If you unpack the equipment, take photographs of the damaged equipment.

If this is not possible, make note of the damages.

• You must file a claim with the shipper for shipping damages immediately

after reporting the damages.

Should you specify the carrier, we recommend that you explore with this chosen

carrier the policies and procedures regarding shipping damage claims prior to

selecting them as your preferred carrier.

If the equipment receives structural damage and is in an un-installable condi-

tion, Triton will work with you to arrange for a replacement unit to be shipped as

soon as possible. The purchaser will be billed for the replacement unit. Triton’s

repair technicians will repair the damaged unit after it is returned to our facilities.

We will credit the purchaser’s account for the full purchase price of the damaged

unit, minus the cost of returning the unit to “like new” condition. Under no

circumstances does Triton authorize anyone to complete structural damage

repairs in the field. Therefore, we will not ship primary structural parts, such as

a cabinet head or main cabinet body for repair in the field.

AUTHORIZED INSTALLATION AND SERVICE PROVIDERS

Triton utilizes several nationwide and regional authorized third party mainte-

nance providers. Triton recommends all ATMs be installed and serviced by

service technicians certified by Triton. This includes authorized third party

service technicians and technicians who have been factory trained by Triton to

service ATM equipment. Installation or repairs attempted by unauthorized ser-

vice technicians may void the warranty or warranty claims denied on the prod-

uct.

Please contact Triton’s Technical Services department at (800) 259-6672 for a list

of our third party service providers and/or to obtain information on the require-

ments and procedures for becoming a certified Triton service technician.

• If possible, call the shipping company before the driver leaves your deliv-

ery site. Make note of the damage on the “receipt of delivery” paperwork.

If this is not possible, call them as soon as possible to report the damage.

xiii

MODEL RL/FT5000

XP

USER MANUAL

TRITON’S TECHNICAL SERVICES DEPARTMENT

The primary purpose of the Technical Services department is to provide assis-

tance to customers in the operation, trouble shooting, and repair of equipment

manufactured by Triton. A toll-free phone number (1-800-259-6672) is provided

for convenience. The Technical Services department operates to serve our

customers. The staff is trained to follow our policies and procedures to ensure

fair and uniform treatment of all our customers.

AUTOMATED VOICE MAIL SYSTEM

Our goal is to have a ‘live’ person answer 100% of all incoming calls (during

regular support hours). On occasion, however, call loads may exceed the capac-

ity of the staff. When this occurs, an automated voice mail system will answer

the call, indicate to the caller that all Technical Support specialists are busy

assisting others, and ask the caller to leave detailed information about the na-

ture of the call.

Should it become necessary to leave a voice mail message, the caller should

state:

• their name,

• the organization for which they work,

• the serial number of the equipment they are calling about,

• detailed description of the problem that they are experiencing, and

• phone number where they can be reached, including area code.

As Technical Support specialists become available, they check for voice mail

messages and return calls in the order in which they were received. By provid-

ing the information requested in the voice mail, the technician can be prepared

when your call is returned. Triton asks you to be patient if you must leave voice

mail and assures you that your call is important to us and that we will respond

promptly.

CALLS FOR SERVICE OR REPAIR

Calls for service or repair will be accepted from authorized service technicians

only. End users must contact either the sales organization that placed the

equipment or an authorized third party service organization to obtain service.

The sections that follow describe the policies and procedures that relate to the

repair and replacement of malfunctioning equipment.

xiv

MODEL RL/FT5000

XP

USER MANUAL

QUESTIONS ON OPERATION OF EQUIPMENT

Technical support is available to owners of Triton equipment and to qualified

service personnel. When calling for help with the configuration or operation of

a Triton product, the caller must provide either positive identification as a ser-

vice technician or the serial number of a Triton terminal. Technical support is

provided during normal business hours for the life of the product.

When calling for help with an operational problem, please have available infor-

mation pertaining to the nature of the trouble. This includes the type of equip-

ment, examples of what is or is not happening, and the name of the processor

that supports your terminal.

All questions pertaining to the settlement of accounts, transaction inquiries,

and fund status must be directed to the processor. Triton does not have access

to the information needed to answer questions relating to specific transactions.

CONTACT INFORMATION

Triton Systems of Delaware, Inc.

522 East Railroad Street

Long Beach, MS 39560

SALES:

1 (800) 367-7191

1 (228) 868-1317

1 (228) 868-0437 (Fax)

SERVICE:

1 (800) 259-6672 (Technical Support)

1 (228) 575-3229 Fax (Technical Support)

1 (228) 868-0859 Fax (Parts)

xv

MODEL RL/FT5000

XP

USER MANUAL

CONTENTS

SECTION 1 - INTRODUCTION ........................................................1

WHAT’S IN THIS MANUAL ................................................................................2

PC-BASED MODELS .........................................................................................2

CLASS OF SERVICE (BUSINESS-VS-LEVEL1)..........................................................2

OPERATING SYSTEM ......................................................................................... 2

FEATURE HIGHLIGHTS .......................................................................................4

STANDARD FEATURES ....................................................................................... 5

ACCESS AND TRANSACTION SECURITY ........................................................ 5

MULTIMEDIA INTERFACE (AUDIO/VIDEO)....................................................6

STORAGE OF FILES .................................................................................... 6

VOICE-ENABLED TRANSACTIONS ................................................................6

COMMUNICATIONS ..................................................................................... 7

ELECTRONIC JOURNAL ............................................................................... 7

TERMINAL SETTLEMENT ............................................................................7

MULTI-LANGUAGE SUPPORT ...................................................................... 8

MESSAGES ...............................................................................................8

REAR SERVICE PANEL (MODEL FT

XP

) ........................................................8

SECTION 2 - BASIC OPERATION ................................................... 9

INTRODUCTION ................................................................................................. 10

CONTROL PANEL LAYOUT ................................................................................. 10

KEYPAD OPERATION ........................................................................................11

SCREEN FUNCTION KEYS .................................................................................. 12

REAR SERVICE PANEL (MODEL FT

XP

) ...............................................................13

MENU-BASED OPERATION................................................................................. 14

VOICE-ENABLED TRANSACTIONS .......................................................................15

SECTION 3 - REPLENISHING CASSETTES ........................................ 17

INTRODUCTION ................................................................................................. 18

DISPENSING MECHANISM (NMD-100) ...............................................................18

NOTE CONDITION ............................................................................................. 18

REPLENISHING CASSETTES ................................................................................20

REMOVING NOTE CASSETTES ...................................................................... 20

OPENING NOTE CASSETTES ........................................................................ 21

LOADING NOTE CASSETTES ........................................................................ 22

INSTALLING NOTE CASSETTES .....................................................................23

REMOVING THE REJECT CASSETTE ......................................................................24

OPENING THE REJECT CASSETTE ........................................................................24

INSTALLING THE REJECT CASSETTE .....................................................................25

VERIFY OPERATION .......................................................................................... 26

xvi

MODEL RL/FT5000

XP

USER MANUAL

CONTENTS

SECTION 4 - PREVENTATIVE MAINTENANCE ....................................27

INTRODUCTION ................................................................................................. 28

REPLENISHING THE RECEIPT PAPER (MODEL RL

XP

)............................................ 28

REPLENISHING THE RECEIPT PAPER (MODEL FT

XP

)............................................ 31

REPLENISHING THE JOURNAL PRINTER (OPTIONAL) ............................................. 33

CLEANING THE ENCLOSURE .............................................................................. 37

CLEANING THE DISPLAY ................................................................................... 37

CARD READER CLEANING .................................................................................37

SECTION 5 - MANAGEMENT FUNCTIONS ....................................... 39

INTRODUCTION ................................................................................................. 40

WHAT IS PRISM 912-EMULATION ........................................................................40

XP PRISM SOFTWARE ARCHITECTURE ................................................................. 42

DISPLAY POWER-UP SEQUENCE ........................................................................ 44

ACCESSING THE MANAGEMENT FUNCTIONS MENU ............................................. 44

SWITCHING SCREENS (MODEL FT

XP)

................................................................................................................

46

FUNCTION A VAILABILITY .................................................................................. 47

MANAGEMENT REPORTS ................................................................................... 48

TERMINAL SETTLEMENT FUNCTIONS ................................................................49

TERMINAL CLOSE FUNCTIONS ........................................................................... 50

VIEW ATM SETTLEMENT TOTALS ......................................................................51

CLEAR ATM SETTLEMENT TOTALS ....................................................................52

REPLENISH CASSETTE(S) ...................................................................................53

DIAGNOSTICS ................................................................................................. 54

DIAGNOSTIC FUNCTIONS ...................................................................................56

CASH DISPENSER .............................................................................................57

CASH DISPENSER STATUS ........................................................................... 58

PURGE .....................................................................................................59

TEST DISPENSE .........................................................................................60

FORCE UNLOCK CASSETTE ......................................................................... 61

INJECT NEW CASSETTE ID .......................................................................... 62

UNLOCK / LOCK A LL CASSETTES ...............................................................63

CARD READER .................................................................................................64

CARD READER STATUS .............................................................................. 65

SCAN CARD ............................................................................................. 66

TRACK 3 READ / WRITE ............................................................................67

RESET ...................................................................................................... 67

PRINTER .......................................................................................................... 68

DEVICE STATUS ......................................................................................... 69

PRINT TEST DATA ...................................................................................... 70

RESET ...................................................................................................... 70

xvii

MODEL RL/FT5000

XP

USER MANUAL

CONTENTS

KEYPAD .......................................................................................................... 71

KEYPAD DEVICE STATUS ............................................................................ 72

TEST KEYPAD .......................................................................................... 73

CLEAR TAMPER ........................................................................................ 74

RESET ...................................................................................................... 74

GENERAL I/O DIAGNOSTICS .............................................................................. 75

LED INDICATORS ...................................................................................... 75

HEADPHONE TEST ....................................................................................76

SAFE DOOR TEST ......................................................................................76

CABINET DOOR TEST ................................................................................. 77

PRINTER POSITION TEST .............................................................................77

PREVIEW SAMPLE VOICE ........................................................................... 77

ELECTRONIC JOURNAL....................................................................................78

ELECTRONIC JOURNAL FUNCTIONS ..................................................................... 79

EXPORT UNAUDITED RECORDS ...........................................................................80

DISPLAY LAST X RECORDS ................................................................................81

JOURNAL STATISTICS ......................................................................................... 82

JOURNAL SETTINGS ............................................................................................... 83-84

AUTO EXPORT .......................................................................................... 83

AUTO DELETE ..........................................................................................83

DELETE INTERVAL (DAYS )..........................................................................84

DELETE RECORDS OLDER THAN (DAYS) .....................................................84

SAV E SETTINGS / EXIT ................................................................................84

PASSWORD MAINTENANCE .............................................................................. 85

PASSWORD MAINTENANCE FUNCTIONS ..............................................................86

CHANGE USER PASSWORD ................................................................................87

CHANGE USER NAME ....................................................................................... 88

MODIFY USER A CCESS ......................................................................................... 89-91

ADD USER ......................................................................................................92

REMOVE USER ................................................................................................. 93

TERMINAL USERS............................................................................................. 94

USER ACCESS REPORT ...................................................................................... 95

CHANGE USERS PASSWORD .............................................................................. 96

SYSTEM PARAMETERS ..................................................................................... 97

SYSTEM PARAMETERS FUNCTIONS ...................................................................... 98

GENERAL SETTINGS ..........................................................................................99

TIME ZONE / DAT A / TIME .........................................................................99

SELECT SCREEN FILE ....................................................................................... 100

SHUTDOWN / RESTART TERMINAL ...................................................................... 101

PERFORM SOFTWARE UPDATES .......................................................................... 102

xviii

MODEL RL/FT5000

XP

USER MANUAL

CONTENTS

TERMINAL CONFIGURATION ............................................................................ 103

TERMINAL CONFIGURATION FUNCTIONS ............................................................. 106

GENERAL PARAMETERS ....................................................................................107

TERMINAL NUMBER .................................................................................. 107

SEND CABINET A LARM STATUS ..................................................................107

SELECT CABINET ALARM STATUS CODE ...................................................... 107

SEND SAFE DOOR A LARM STATUS .............................................................. 107

ENTER / EXIT MAINTENANCE STATUS OPTIONS ............................................. 108

SAV E GENERAL PARAMETERS / EXIT............................................................ 108

COUPONS ........................................................................................................109

STATE SETTINGS ...............................................................................................110

USE OVERLAY SCREEN FOR A MOUNT ENTRY ............................................... 110

USE ENTER KEY TO TERMINATE A MOUNT ENTRY .........................................110

MAP ENTER KEY FOR AMOUNT ENTRY ....................................................... 110

USE ENTER KEY TO TERMINATE INPUT INFORMATION ................................... 110

MAP ENTER KEY FOR INPUT INFORMATION .................................................110

SAV E SETTINGS / EXIT ................................................................................110

CASH DISPENSER SETUP ...................................................................................111

GENERAL SETTINGS ................................................................................... 112

REPORT ERROR STATUS AS LOGICAL .....................................................112

TRAP STATUS THRESHOLD (CONSECUTIVE SHUTTER ERRORS) .................112

AUTOMATIC CASH RETRACT ................................................................ 113

REPORT DISPENSER COMPLETION STATUS .............................................113

SELECT PARTIAL DISPENSE STATUS ...................................................... 113

SAV E SETTINGS / EXIT ........................................................................113

912 HOST LOGICAL CASSETTE MAPPING ................................................... 114-115

CONFIGURE CASSETTES.............................................................................. 116

MEDIA TYPE ....................................................................................117

CURRENCY CODE .............................................................................. 117

CURRENCY VARIANT ..........................................................................118

CURRENCY VALUE .............................................................................118

NON-CURRENCY VALUE ..................................................................... 118

MEDIA WIDTH ..................................................................................118

MEDIA LENGTH .................................................................................118

SAV E SETTINGS / EXIT ........................................................................118

SCREEN SETUP ................................................................................................ 119

GEOMETRY (ROW, COLUMN) ...................................................................... 119

SAV E SETTINGS / EXIT ................................................................................119

AUDIO SETUP ..................................................................................................120

GENERAL SETTINGS ................................................................................... 121

IMPORT - REPEAT KEY SPEECH DATA / ORIENTATION MESSAGE ....................122

PREVIEW - REPEAT KEY SPEECH / ORIENTATION MESSAGE / SAMPLE VOICE .. 123

xix

MODEL RL/FT5000

XP

USER MANUAL

CONTENTS

PRINTER SETUP ................................................................................................124

GENERAL SETTINGS ................................................................................... 125

USE BLACK MARK PAPER ..................................................................125

CONFIGURE - RECEIPT PRINT FORM / COUPON PRINT FORM ......................... 126

TEST - RECEIPT FORM SETTINGS / COUPON FORM SETTINGS ..........................127

COMMUNICATION ............................................................................................. 128

GENERAL SETTINGS ................................................................................... 129

MAC-ING ........................................................................................ 129

ETHERNET SETTINGS ..................................................................................130

USE DHCP TO OBTAIN TERMINAL IP ADDRESS ....................................132

TERMINAL IP ADDRESS ...................................................................... 132

SUBNET MASK ..................................................................................132

GATEWAY ADDRESS ........................................................................... 132

USE DHCP SERVER TO OBTAIN DNS SERVER A DDRESS ........................ 132

PRIMARY / ALTERNATE DNS SERVER ................................................... 132

PRIMARY WINS SERVER ....................................................................133

HOST COMMUNICATION PROTOCOL SETTINGS ...............................................134

TCP/IP PROTOCOL SETTINGS ..............................................................134

SNA SETTINGS .................................................................................. 136

EICON CARD SETTINGS ..............................................................................138

KEY MANAGEMENT .........................................................................................139

KEY MANAGEMENT FUNCTIONS ........................................................................140

KEY MANAGEMENT LOGIN ............................................................................... 140

ENTER A KEY .................................................................................................. 141

ENTER B KEY ..................................................................................................143

CHANGE PASSWORD FOR USER 1 / USER 2 ......................................................... 144

TERMINAL STATUS ..........................................................................................145

TERMINAL STATUS FUNCTIONS ...........................................................................146

DISPLAY CONFIGURATION SUMMARY ................................................................. 147

SAV E PARAMETERS TO EXTERNAL STORAGE ........................................................148

RESTORE PARAMETERS FROM EXTERNAL STORAGE .............................................. 149

EXPORT TRACE FILES ....................................................................................... 150

XP SOFTWARE ARCHITECTURE WITHOUT PRISM (VDM) ...................................151

VENDOR DEPENDENT MODE (VDM) DIAGNOSTICS MENU .................................. 152

JOURNAL PRINTER ............................................................................................ 153

DEVICE STATUS ................................................................................................154

PRINT TEST DAT A .............................................................................................155

RESET .............................................................................................................155

XP SOFTWARE A RCHITECTURE WITHOUT PRISM (3

RD

PARTY APPLICATION) ......156

xx

MODEL RL/FT5000

XP

USER MANUAL

APPENDIX A - ELECTRONIC LOCK ................................................A-1

ENTERING THE COMBINATION ............................................................................ A-2

LOCKOUT FEATURE .......................................................................................... A-2

CHANGING THE COMBINATION ........................................................................... A-2

BATTERY LOW WARNING .................................................................................A-3

CHANGING THE BATTERY ..................................................................................A-3

APPENDIX B - GLOSSARY OF TERMS............................................ B-1

PRISM 912 RELEASE NOTES:

1.0.21

1.2.22

1.0.23

DOCUMENT UPDATES

CONTENTS

SECTION 6 - ERROR CODES (WOSA / TERMINAL) .......................157

INTRODUCTION ................................................................................................. 158

NMD ERROR CODES ........................................................................................ 159

CARD READER ERROR CODES ........................................................................... 162

RECEIPT PRINTER ERROR CODES ........................................................................163

Oct 23 2009 Journal printer no longer offered

La pagina sta caricando ...

Triton Systems FT5000XP Series Manuale del proprietario

Questo manuale è adatto anche per

Triton Systems FT5000XP Series Manuale del proprietario

in altre lingue

Altri documenti