![](//vs1.manuzoid.it/store/data-gzf/815a897cc72ac9e2471ae96f563a706c/2/000133854.htmlex.zip/bg12.jpg)
Safety instructions FR-145
18
2 1, page 3: This refers to an element in an illustration. In this case,
item 1 in figure 2 on page 3.
Please observe the following safety instructions.
2 Safety instructions
Caution!
WAECO International will not be held liable for claims for damage
resulting from the following:
– Damage to the device resulting from mechanical influences and
overvoltage
– Alterations to the device made without the explicit permission of
WAECO International
– Use for purposes other than those described in the operating
manual
2.1 General safety
z Have a trained technician make installations in wet rooms.
z Do not operate the device if it is visibly damaged.
z This device may only be repaired by qualified personnel.
Inadequate repairs can lead to considerable hazards.
Should your device need to be repaired, please contact
WAECO customer services.
z Do not open the refrigerant circuit under any circumstances.
z Set up the device in a dry location where it is protected against
splashing water.
z Do not place the device near naked flames or other heat
sources (heaters, direct sunlight, gas ovens etc.).
z Ensure that the ventilation slots are not covered.
z The device is not suitable for storing caustic materials or
materials containing solvents!
z Before starting up the device for the first time, check if the
operating voltage matches the battery voltage (see type plate).
z Danger of fatal injuries!
When using the device on boats: if the device is powered by
the mains, ensure that the power supply has a residual current
circuit breaker!
_fr-145.book Seite 18 Montag, 14. August 2006 4:03 16