Canon LEGRIA HF G26 Manuale utente

PUB. DIE-0512-000B

HD Camcorder

Instruction Manual

2

COPYRIGHT WARNING:

Unauthorized recording of copyrighted materials may infringe on the rights of copyright owners and be contrary to copyright

laws.

Trademark Acknowledgements

• SD, SDHC and SDXC Logos are trademarks of SD-3C, LLC.

• Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.

• macOS is a trademark of Apple Inc., registered in the U.S. and other countries.

• HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing

Administrator, Inc. in the United States and other countries.

• “AVCHD”, “AVCHD Progressive” and the “AVCHD Progressive” logo are trademarks of Panasonic

Corporation and Sony Corporation.

• Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

• Other names and products not mentioned above may be trademarks or registered trademarks of their

respective companies.

• This device incorporates exFAT technology licensed from Microsoft.

• “Full HD 1080” refers to Canon camcorders compliant with high-definition video composed of 1,080 vertical pixels

(scanning lines).

• This product is licensed under AT&T patents for the MPEG-4 standard and may be used for encoding MPEG-4

compliant video and/or decoding MPEG-4 compliant video that was encoded only (1) for a personal and non-

commercial purpose or (2) by a video provider licensed under the AT&T patents to provide MPEG-4 compliant video. No license is

granted or implied for any other use for MPEG-4 standard.

• THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL USE OF A CONSUMER OR OTHER

USES IN WHICH IT DOES NOT RECEIVE REMUNERATION TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC

VIDEO’’) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL ACTIVITY AND/OR WAS

OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY

OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM

3

Highlights of the Camcorder

The Canon LEGRIA HF G26 HD Camcorder is a high-performance camcorder whose compact size

makes it ideal in a variety of situations. The following are just some of the many functions featured in

the camcorder.

HD Recording

HD CMOS PRO sensor and DIGIC DV 4

image processor

The camcorder is equipped with a

1/2.84-type CMOS sensor that captures video

at an effective pixel count of approximately

2.91 megapixels (2136x1362). The video is

then processed by the DIGIC DV 4 image

processor. This allows the camcorder to excel

in low-light situations and achieve improved

image stabilization.

Wide zoom lens

With a focal length at full wide angle of

26.8 mm* (35 mm equivalent), the camcorder

has superb wide-angle shooting capability. The

lens is also capable of 20x optical zoom.

* 28.8 mm when using Dynamic IS.

Shooting video with the look you want

You can adjust many aspects of the picture,

such as the color depth, sharpness and

brightness so that you create a desired "look"

(A 63). The camera also comes with preset

looks from which you can choose. The first is

the [Wide DR] look, which applies a gamma

curve with a very wide dynamic range and an

appropriate color matrix. The second is the

[Highlight Priority] look, which creates a natural

gradation in tones and reduces overexposure

in bright areas by not compressing highlights.

When playing back video shot with that look,

you can appreciate the improved detail when

using an external monitor set to brighter

settings.

Operability

Emphasis on versatility

This camcorder has features to make it usable

as a main camera but is also small enough to

be very portable. The advanced image

stabilization (A 52) will let you shoot in a

variety of situations in the field.

Manual controls at your fingertips

The focus/zoom ring helps you achieve the

focus you are looking for. You can also easily

change the ring's functionality so that you can

operate the zoom. Furthermore, you can

assign certain frequently used functions to a

customizable button and adjust those

functions with the accompanying dial (A 83).

If those were not enough, the camcorder also

features 5 assignable buttons to which you

can assign a variety of functions so that you

can access them with ease (A 84).

Face detection

When a subject's face is detected, the

camcorder can track and focus on it (A 46).

Furthermore, you can have the camcorder in

manual focus but switch to autofocus only

when a face is detected, ensuring that

important subjects are in focus.

AVCHD/MP4 recording and dual

recording

When you record, you can choose between

AVCHD and MP4 formats (A 30). You can

also use dual recording (A 38) to record the

same scene to both memory cards and even

record on both memory cards using different

formats. Dual recording is convenient, for

example, to create a backup of your recording.

4

Special recording modes (A 40, 79)

When you make recordings, you can change

the recording frame rate to achieve a fast or

slow motion effect. Alternatively, you can use

pre-recording to record 3 seconds before you

decide to start recording, helping you capture

those hard-to-catch opportunities.

Other Features

Audio scene select

With the audio scene select function (A 70),

you can optimize the audio settings of the

built-in microphone by selecting the audio

scene that matches your surroundings. Your

audience will feel even more immersed in the

scene during playback.

Smart AUTO

Smart AUTO (A 33) automatically selects the

best scene mode for the scene you want to

shoot. You get spectacular recordings every

time without worrying about settings.

LCD screen and viewfinder

The LCD screen and viewfinder both have

100% frame coverage, which will ensure that

you can accurately check that your shots are

framed how you want them. The LCD screen

has incredible clarity, which is indispensible in

checking the details of those important shots.

The viewfinder can be tilted 45 degrees

upward, which gives you additional range and

versatility while you shoot.

Touch AE

By simply touching the screen, you can make

dark areas in the picture appear brighter

(A 57). This operation is simple yet allows

you to shoot with the desired exposure.

Additional functions

Other functions include relay recording

(A 38), which allows you to continue

recording on the other memory card when one

becomes full, and converting scenes to MP4

(A 105).

5

1 Introduction 8

About this Manual 8

Conventions Used in this Manual 8

Supplied Accessories 10

Names of Parts 11

2 Preparations 15

Attaching the Ferrite Core 15

Charging the Battery Pack 15

Preparing the Camcorder 18

Using the Lens Hood and Lens Cap 18

Using the Viewfinder 18

Adjusting the LCD Screen 19

Grip Belt and Straps 20

Basic Operation of the Camcorder 21

Turning the Camcorder On and Off 21

Setting the Camera Mode 22

Using the Touch Screen 22

Using the FUNC. Button and

Joystick 23

First Time Settings 24

Setting the Date and Time 24

Changing the Language 25

Changing the Time Zone 25

Using the Menus 26

Using a Memory Card 28

Memory Cards Compatible for Use with

the Camcorder 28

Inserting and Removing a Memory

Card 29

Initializing a Memory Card 29

Selecting the Memory Card for

Recordings 30

Selecting the Movie Format (AVCHD/

MP4) 31

3 Recording 32

Recording Movies and Photos 32

Recording in AUTO Mode 32

Recording in n (Manual) Mode 34

Reviewing the Latest Scene

Recorded 36

Selecting the Recording Mode (Video

Quality) 37

Dual Recording and Relay Recording 38

Selecting the Frame Rate 39

Slow & Fast Motion Recording 40

CINEMA Mode and Cinema-Look

Filters 41

Focus Adjustment 43

Manual Focus 43

Autofocus 45

Face Detection & Tracking 46

Zooming 48

Using the Focus/Zoom Ring 48

Using the Zoom Rocker 49

Using the Touch Screen’s Zoom

Controls 50

Soft Zoom Control 50

Digital Tele-Converter 51

Advanced Image Stabilization 52

Automatic Gain Control (AGC) Limit 53

Automatic Exposure Recording

Programs 54

Exposure Adjustment 56

Using the Manual Exposure Recording

Program 56

Exposure Compensation 57

White Balance 59

Special Scene Recording Programs 61

Looks and Other Image Effects 63

Selecting a Look 63

Adjusting Picture Settings 63

Setting the Time Code 65

Selecting the Running Mode 65

Setting the User Bit 67

Using the Mini Advanced Shoe 68

Recording Audio 69

Using an External Microphone 69

Switching the Input (MIC Terminal) 70

Audio Scenes 70

Audio Recording Level (Built-in

Microphone/MIC Terminal) 72

Microphone Directionality (Built-in

Microphone) 73

Audio Equalizer (Built-in Microphone) 73

Wind Screen (Built-in Microphone) 74

Microphone Attenuator 74

Low Cut Filter (MIC Terminal) 75

Audio Mix 75

Table of contents

6

Using Headphones 76

Color Bars/Audio Reference Signal 77

Recording Color Bars 77

Recording an Audio Reference

Signal 77

Video Snapshot 78

Pre-Recording 79

Onscreen Displays and Data Code 80

Using the GP-E2 GPS Receiver 81

Connecting the GPS Receiver 81

4 Customization 83

CUSTOM Dial and Button 83

Assignable Buttons 84

Changing the Assigned Function 84

Using an Assignable Button 85

Saving and Loading Menu Settings 86

Saving Menu Settings to a Memory

Card 86

Loading Menu Settings from a Memory

Card 86

5 Playback 87

Playing Back Video 87

Adjusting the volume 88

Displaying scene information 89

Capturing Photos During Movie

Playback 90

Deleting Scenes 91

Deleting a Single Scene 91

Deleting Scenes from the Index

Screen 91

Dividing Scenes 93

Trimming Scenes 94

6 External Connections 95

Connecting to an External Monitor 95

Connection Diagram 95

Using the HDMI OUT Terminal 96

Using the AV OUT Terminal 96

Audio Output 97

Synchronizing the Video with the Audio

being Monitored 97

7 Photos 98

Viewing Photos 98

Photo Jump Function 99

Deleting Photos 100

Deleting a Single Photo 100

Deleting Photos from the Index

Screen 100

8 Saving/Sharing

Recordings 101

Saving Movies to a Computer 101

Transferring Movies to the

Computer 102

Copying Recordings Between Memory

Cards 103

Copying Scenes from the Movie Index

Screen 103

Copying a Single Photo 103

Copying Photos from the Index

Screen 104

Converting Movies to MP4 Format 105

Copying Recordings to an External Video

Recorder 106

In High Definition 106

In Standard Definition 106

9 Additional Information 108

Appendix: Menu Options Lists 108

FUNC. Menu 108

Setup Menus 109

Appendix: Onscreen Icons and

Displays 118

Troubleshooting 122

List of Messages 126

Safety Instructions and Handling

Precautions 130

Camcorder 131

Battery Pack 132

Memory Card 132

Built-in Rechargeable Lithium

Battery 133

Disposal 133

Maintenance/Others 134

Cleaning 134

Condensation 134

Viewing the Certification Logo 134

Using the Camcorder Abroad 135

7

Optional Accessories 136

Specifications 139

Reference Tables 142

Approximate recording times 142

Approximate number of photos 142

Charging, Recording and Playback

Times 143

Index 144

About this Manual

8

Introduction

About this Manual

Thank you for purchasing the Canon LEGRIA HF G26. Please read this manual carefully before you

use the camcorder and retain it for future reference. Should your camcorder fail to operate correctly,

refer to

Troubleshooting

(A 122).

Conventions Used in this Manual

• IMPORTANT: Precautions related to the camcorder’s operation.

• NOTES: Additional topics that complement the basic operating procedures.

• POINTS TO CHECK: Restrictions or requirements regarding the function described.

• A: Reference page number within this manual.

• The following terms are used in this manual:

“Memory card” refers to an SD, SDHC or SDXC memory card.

“Screen” refers to the LCD screen and the viewfinder screen.

“Scene” refers to one movie unit from the point you press the START/STOP button to start

recording until you press again to pause the recording.

• The photos included in this manual are simulated pictures taken with a still camera.

• Some screenshots in this manual have been simplified to show only relevant icons.

IMPORTANT

• Observe the following precautions while the camcorder’s ACCESS indicator is on or flashing. Failing

to do so may result in permanent data loss or damage to the memory.

- Do not disconnect the power source or turn off the camcorder.

- Do not open the double memory card slot cover.

- Do not change the camcorder’s camera mode.

- Do not set the camcorder to MEDIA mode.

- When a USB cable is connected to the camcorder, do not disconnect the USB cable.

1

Introduction

About this Manual

9

Focus Adjustment

Autofocus

When autofocus is activated, the camcorder continuously adjusts the focus on the subject in the

center of the screen. The focusing range is 1 cm (0.39 in.; at full wide-angle, measured from the front

of the lens barrel) to G and 60 cm (2 ft.; throughout the zoom range, measured from the front of the

lens barrel) to G. Perform the following procedure to set the autofocus speed.

1 and modes only: Press the AF/MF button.

2 Open the [AF Mode] screen.

[FUNC.] > [MENU] > p > [AF Mode]

3 Touch the desired option and then touch [X].

• The icon of the selected option appears on the screen.

Options

(



Default value)

Operating modes:

[= I t t AF]



S hf I AF Th f i dj dhhih dThi

Brackets [ ] are used to

refer to onscreen buttons

and menu options you will

select and to other

onscreen messages and

displays.

The three sets of icons indicate the operating

mode and whether a function is available in

that mode.

: Indicates whether the

camcorder is in shooting (CAMERA) or

playback (MEDIA) mode. In this example, the

function is available only in mode. For

details, refer to

Turning the Camcorder On

and Off

(A 21).

: Indicates the movie format. For

details, refer to

Selecting the Movie Format

(AVCHD/MP4)

(A 31).

: Indicates the camera

mode. For details, refer to

Setting the

Camera Mode

(A 22).

The > arrow is used to abbreviate menu

selections. For details on how to use the

menus, refer to

Using the Menus

(A 26).

For a summary of available menu options

and settings, refer to the appendix

Menu

Options Lists

(A 108).

Supplied Accessories

10

Supplied Accessories

The following accessories are supplied with the camcorder:

CA-570 Compact Power Adapter

(incl. power cord and ferrite core)

BP-820 Battery Pack Lens hood with lens barrier

Lens cap Quick Guide

Names of Parts

11

Names of Parts

1 Lens barrier switch (A 32)

2 Memory card slot 2 (A 29)

3 Memory card slot 3 (A 29)

4 u (review recording) button (A 36)/

Assignable button 5 (A 84)

5 Lens hood (A 18)

6 Focus/Zoom ring (A 43, 48)

7 CUSTOM (customizable) dial (A 83)

8 CUSTOM (customizable) button

(A 83)

9 Double memory card slot cover

10 DISP. (onscreen display) button

(A 80)/BATT. INFO (battery

information) button (A 121)

4

108765

1

32

9

L

e

f

t s

id

e v

i

ew

Names of Parts

12

1 Built-in speaker (A 88)

2MIC terminal (A 70)

3HDMI OUT terminal (A 95, 96)

4 REMOTE terminal

For connecting commercially

available remote controllers.

5 × (headphones) terminal (A 76)

6USB terminal (A 81)

7DC IN terminal (A 15)

8AV OUT terminal (A 95, 96)

9 Grip belt (A 20)

25

6

3

4

987

1

Ri

g

h

t s

id

e v

i

ew

Names of Parts

13

1 Instant AF sensor (A 45, 134)

2 AF/MF button (A 43)/

Assignable button 1 (A 84)

3 PRE REC (pre-recording) button

(A 79)/

Assignable button 2 (A 84)

4 LCD touch screen (A 19, 22)

5 Focus/Zoom ring switch (A 43, 48)

6 Viewfinder (A 18)

7 Dioptric adjustment lever (A 18)

8Joystick (A 23)/SET button (A 23)

9 Strap mount (A 20)

10 Assignable button 3 (A 84)

11 Assignable button 4 (A 84)

12 Battery attachment unit (A 15)

13 START/STOP button (A 32)

14 FUNC. button (A 23)

15 Serial number

1

45

6

7

8

9

14

15

13121110

3

2

F

ront v

i

ew

Back view

Names of Parts

14

1Power switch (A 21)

2 POWER / CHG (battery charging)

indicator (A 15)

3 Built-in stereo microphone

(A 69)

4 Accessory shoe

5Mode switch (A 22)

6 Camcorder zoom rocker (A 49)

7ACCESS indicator (A 32)

8 Mini advanced shoe (A 68)

9 Lens hood mount index mark

10 Tripod socket

For mounting the camcorder on a

tripod with a mounting screw 6.5 mm

or shorter.

11 BATTERY RELEASE switch (A 16)

12 Eye cup (A 18)

3

4

5

6

7

8

1

2

9

10

11

12

T

op v

i

ew

B

ottom v

i

ew

Attaching the Ferrite Core

15

Preparations

Attaching the Ferrite Core

Attach the enclosed ferrite core before you connect the compact power adapter to the camcorder.

Attach the ferrite core to the cable about 6 cm from the DC plug

(the plug to be connected to the DC IN terminal).

Pass the cable through the center of the core and wrap it around the

core (as shown in the illustration), then close the unit until it clicks shut.

Charging the Battery Pack

The camcorder can be powered with a battery pack or directly using the compact power adapter.

1 Connect the power cord to the compact power

adapter.

2 Plug the power cord into a power outlet.

3 Connect the compact power adapter to the

camcorder’s DC IN terminal.

4 Attach the battery pack to the camcorder.

• Press the battery pack softly into the battery attachment

unit and slide it forward until it clicks in place.

DC IN terminal

2

Preparations

Charging the Battery Pack

16

5 Charging will start when the camcorder is turned off.

• If the camcorder was on, the green POWER/CHG indicator

will go out when you turn off the camcorder. After a

moment, the POWER/CHG indicator will turn on in red

(battery pack charging). The red POWER/CHG indicator will

go out when the battery pack is fully charged.

• If the indicator flashes, refer to

Troubleshooting

(A 124).

6 Disconnect the compact power adapter in the order

shown in the illustration.

To remove the battery pack

1 Slide the BATTERY RELEASE switch in the direction of the

arrow and hold it pressed down.

2 Slide the battery pack and then pull it out.

POWER/CHG (battery charging) indicator

햷

-4

햷

-3

햷

-1

햷

-2

BATTERY

RELEASE

switch

Charging the Battery Pack

17

IMPORTANT

• Turn off the camcorder before connecting or disconnecting the compact power adapter. After you

turn off the camcorder, important data is updated on the memory card. Be sure to wait until the

green POWER/CHG indicator goes out.

• When using the compact power adapter, do not fix it permanently to one place as this may cause a

malfunction.

• Do not connect to the camcorder’s DC IN terminal or to the compact power adapter any electrical

equipment that is not expressly recommended for use with this camcorder.

• To prevent equipment breakdowns and excessive heating, do not connect the supplied compact

power adapter to voltage converters for overseas travels or special power sources such as those on

aircraft and ships, DC-AC inverters, etc.

• For details on how to take care of the battery pack, refer to

Safety Instructions and Handling

Precautions

(A 130).

NOTES

• We recommend charging the battery pack in temperatures between 10 °C and 30 °C. If either the

ambient temperature or the battery pack’s temperature is outside the range of approx. 0 °C to

40 °C, charging will not start.

• The battery pack will be charged only when the camcorder is off.

• If the power supply was disconnected while charging a battery pack, make sure the POWER/CHG

indicator has gone out before restoring the power supply.

• If remaining battery time is an issue, you can power the camcorder using the compact power

adapter so the battery pack will not be consumed.

• Charged battery packs continue to discharge naturally. Therefore, charge them on the day of use, or

the day before, to ensure a full charge.

• The first time you use a battery pack, fully charge it and then use the camcorder until the battery

pack is completely exhausted. Doing so will ensure that the remaining recording time will be

displayed accurately.

• We recommend that you prepare battery packs to last 2 to 3 times longer than you think you might

need.

• For charging times and approximate usage times, refer to

Reference Tables

(A 142).

Preparing the Camcorder

18

Preparing the Camcorder

This section covers the basic preparations for the camcorder such as attaching the lens hood,

adjusting the grip belt and adjusting the viewfinder and LCD screen. When attaching the lens hood,

grip belt and straps, be careful not to drop the camcorder by placing it on a table or other stable

surface.

Using the Lens Hood and Lens Cap

While recording, the supplied lens hood with lens barrier is

effective for reducing stray light that can be the cause of lens

flare and ghost images. Additionally, closing the lens barrier

can help prevent fingerprints and dirt accumulation on the

lens.

1 Remove the lens cap.

2 Align the mark on the lens hood with the lens hood

mount index mark on the camera (

햲), and then turn

the lens hood clockwise until it stops with a click

(햳).

• Be careful not to deform the lens hood.

• Make sure that the lens hood is aligned with the thread.

• To remove the lens hood, turn it counterclockwise.

NOTES

• Use the supplied lens cap when carrying the camcorder or storing it after use.

• Note that the lens cap and the lens hood with lens barrier cannot be used simultaneously.

Using the Viewfinder

If it is difficult to use the LCD screen, you can use the viewfinder, which can be tilted 45 degrees

upward.

1 Close the LCD panel.

2 Pull out the viewfinder.

3 Use the power switch to turn on the camcorder.

4 Adjust the viewfinder using the dioptric adjustment

lever.

Dioptric

adjustment

lever

Preparing the Camcorder

19

• If you wear glasses, you may find the viewfinder easier to

use if you flip back the outer edge of the eye cup toward

the camcorder body.

NOTES

• You cannot use the LCD screen and viewfinder simultaneously. To use the viewfinder, make sure

you close the LCD panel.

• Make sure you keep the eye cup attached when using the camcorder.

• For details about how to take care of the viewfinder, refer to

Handling Precautions

(A 131),

Cleaning

(A 134).

Adjusting the LCD Screen

Open the LCD panel 90 degrees.

• You can rotate the panel 90 degrees downward.

• You can rotate the panel 180 degrees toward the lens. Rotating the LCD toward the lens can be

useful to allow the subject to monitor the LCD screen while you use the viewfinder.

NOTES

• You can adjust the brightness of the LCD screen with the [FUNC.] > [MENU] > q > [LCD

Brightness] or [LCD Backlight] setting. Also, you can hold the DISP. button pressed down for more

than 2 seconds to change the [LCD Backlight] setting between bright and normal. You can adjust

the brightness of the viewfinder with the [FUNC.] > [MENU] > q > [Viewfinder Backlight]

setting.

• Adjusting the brightness or using the [FUNC.] > [MENU] > q > [ View Assistance] setting

does not affect the brightness of recordings.

• Using a brighter setting will shorten the effective usage time of the battery pack.

• For details about how to take care of the LCD screen and viewfinder, refer to

Handling Precautions

(A 131),

Cleaning

(A 134).

• About the LCD and viewfinder screens: The screens are produced using extremely high-precision

manufacturing techniques, with more than 99.99% of the pixels operating to specification. Very

rarely, pixels may misfire or may light up permanently as white dots. This has no effect on the

recorded image and does not constitute a malfunction.

180°

90°

Subject can monitor the LCD screen

(you can use the viewfinder at the same time)

180°

Preparing the Camcorder

20

Grip Belt and Straps

Fasten the grip belt.

• Adjust the grip belt so that you can reach the camcorder

zoom rocker with your index finger, and the START/STOP

button with your thumb.

Attaching an optional wrist strap

Attach the wrist strap to the strap mount on the grip belt,

adjust the length and fasten.

• You can use both for extra convenience and protection.

Attaching an optional shoulder strap

Pass the ends of the shoulder strap

through the strap mount on the grip belt

and adjust the length of the strap.

La pagina sta caricando ...

Canon LEGRIA HF G26 Manuale utente

Canon LEGRIA HF G26 Manuale utente

in altre lingue

Documenti correlati

Altri documenti