Canon XA11 Manuale utente

Categoria
Videocamere
Tipo
Manuale utente

Questo manuale è adatto anche per

PUB.DIE-0509-000
HD Camcorder
Instruction Manual
2
COPYRIGHT WARNING:
Unauthorized recording of copyrighted materials may infringe on the rights of copyright owners and be contrary to copyright
laws.
Trademark Acknowledgements
SD, SDHC and SDXC Logos are trademarks of SD-3C, LLC.
Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.
macOS is a trademark of Apple Inc., registered in the U.S. and other countries.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
“AVCHD”, “AVCHD Progressive” and the “AVCHD Progressive” logo are trademarks of Panasonic
Corporation and Sony Corporation.
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
Other names and products not mentioned above may be trademarks or registered trademarks of their
respective companies.
This device incorporates exFAT technology licensed from Microsoft.
“Full HD 1080” refers to Canon camcorders compliant with high-definition video composed of 1,080 vertical pixels
(scanning lines).
This product is licensed under AT&T patents for the MPEG-4 standard and may be used for encoding MPEG-4
compliant video and/or decoding MPEG-4 compliant video that was encoded only (1) for a personal and non-
commercial purpose or (2) by a video provider licensed under the AT&T patents to provide MPEG-4 compliant video. No license is
granted or implied for any other use for MPEG-4 standard.
3
Highlights of the Camcorder
The Canon XA15 / XA11 HD Camcorder is a high-performance camcorder whose compact size
makes it ideal in a variety of situations. The following are just some of the many functions featured in
the camcorder.
HD Recording
HD CMOS PRO sensor and DIGIC DV 4
image processor
The camcorder is equipped with a
1/2.84-type CMOS sensor that captures video
at an effective pixel count of approximately
2.91 megapixels (2136x1362). The video is
then processed by the DIGIC DV 4 image
processor. This allows the camcorder to excel
in low-light situations and achieve improved
image stabilization.
Wide zoom lens
With a focal length at full wide angle of
26.8 mm* (35 mm equivalent), the camcorder
has superb wide-angle shooting capability. The
lens is also capable of 20x optical zoom.
* 28.8 mm when using Dynamic IS.
Shooting video with the look you want
You can adjust many aspects of the picture,
such as the color depth, sharpness and
brightness so that you create a desired "look"
(A 66). The camera also comes with preset
looks from which you can choose. The first is
the [Wide DR] look, which applies a gamma
curve with a very wide dynamic range and an
appropriate color matrix. The second is the
[Highlight Priority] look, which creates a natural
gradation in tones and reduces overexposure
in bright areas by not compressing highlights.
When playing back video shot with that look,
you can appreciate the improved detail when
using an external monitor set to brighter
settings.
Operability
Emphasis on versatility
This camcorder has features to make it usable
as a main camera but is also small enough to
be very portable. The advanced image
stabilization (A 55) will let you shoot in a
variety of situations in the field. The handle unit
is removable so you can detach it when you
need improved portability and then reattach it
when you need extra audio functionality.
Manual controls at your fingertips
The focus/zoom ring helps you achieve the
focus you are looking for. You can also easily
change the ring's functionality so that you can
operate the zoom. Furthermore, you can
assign certain frequently used functions to a
customizable button and adjust those
functions with the accompanying dial (A 89).
If those were not enough, the camcorder also
features 5 assignable buttons to which you
can assign a variety of functions so that you
can access them with ease (A 90).
Face detection
When a subject's face is detected, the
camcorder can track and focus on it (A 49).
Furthermore, you can have the camcorder in
manual focus but switch to autofocus only
when a face is detected, ensuring that
important subjects are in focus.
Infrared recording
Record in darkness using infrared recording
(A 86). With the built-in infrared light on the
handle unit, you can record nocturnal animals
in their natural environment or other such
scenes.
4
AVCHD/MP4 recording and dual
recording
When you record, you can choose between
AVCHD and MP4 formats (A 33). You can
also use dual recording (A 41) to record the
same scene to both memory cards and even
record on both memory cards using different
formats. Dual recording is convenient, for
example, to create a backup of your recording.
Special recording modes (A 43, 84)
When you make recordings, you can change
the recording frame rate to achieve a fast or
slow motion effect. Alternatively, you can use
pre-recording to record 3 seconds before you
decide to start recording, helping you capture
those hard-to-catch opportunities.
Other Features
Versatile audio connectivity
You can use the built-in microphone, MIC
terminal or the two INPUT terminals when
recording. When using the INPUT terminals,
you can even use microphones that require
phantom power.
Audio scene select
With the audio scene select function (A 75),
you can optimize the audio settings of the
built-in microphone by selecting the audio
scene that matches your surroundings. Your
audience will feel even more immersed in the
scene during playback.
LCD screen and viewfinder
The LCD screen and viewfinder both have
100% frame coverage, which will ensure that
you can accurately check that your shots are
framed how you want them. The LCD screen
has incredible clarity, which is indispensible in
checking the details of those important shots.
The viewfinder can be tilted 45 degrees
upward, which gives you additional range and
versatility while you shoot.
Touch AE
By simply touching the screen, you can make
dark areas in the picture appear brighter
(A 60). This operation is simple yet allows
you to shoot with the desired exposure.
Additional functions
Other functions include relay recording
(A 41), which allows you to continue
recording on the other memory card when one
becomes full, and converting scenes to MP4
(A 113).
5
1 Introduction 8
About this Manual 8
Conventions Used in this Manual 8
Supplied Accessories 10
Names of Parts 11
2 Preparations 16
Attaching the Ferrite Core 16
Charging the Battery Pack 16
Preparing the Camcorder 19
Attaching the Microphone Holder
Unit 19
Attaching the Handle Unit 19
Using the Lens Hood and Lens Cap 20
Using the Viewfinder 20
Adjusting the LCD Screen 21
Grip Belt and Straps 22
Basic Operation of the Camcorder 24
Turning the Camcorder On and Off 24
Setting the Camera Mode 25
Using the Touch Screen 25
Using the FUNC. Button and
Joystick 26
First Time Settings 27
Setting the Date and Time 27
Changing the Language 28
Changing the Time Zone 28
Using the Menus 29
Using a Memory Card 31
Memory Cards Compatible for Use with
the Camcorder 31
Inserting and Removing a Memory
Card 32
Initializing a Memory Card 32
Selecting the Memory Card for
Recordings 33
Selecting the Movie Format (AVCHD/
MP4) 34
3 Recording 35
Recording Movies and Photos 35
Recording in AUTO Mode 35
Recording in n (Manual) Mode 37
Reviewing the Latest Scene
Recorded 39
Selecting the Recording Mode (Video
Quality) 40
Dual Recording and Relay Recording 41
Selecting the Frame Rate 42
Slow & Fast Motion Recording 43
CINEMA Mode and Cinema-Look
Filters 44
Focus Adjustment 46
Manual Focus 46
Autofocus 48
Face Detection & Tracking 49
Zooming 51
Using the Focus/Zoom Ring 51
Using the Zoom Rockers 52
Using the Touch Screen’s Zoom
Controls 53
Soft Zoom Control 54
Digital Tele-Converter 54
Advanced Image Stabilization 55
Automatic Gain Control (AGC) Limit 56
Automatic Exposure Recording
Programs 57
Exposure Adjustment 59
Using the Manual Exposure Recording
Program 59
Exposure Compensation 60
White Balance 62
Special Scene Recording Programs 64
Looks and Other Image Effects 66
Selecting a Look 66
Adjusting Picture Settings 66
Setting the Time Code 68
Selecting the Running Mode 68
Setting the User Bit 70
Recording Audio 71
Audio Settings and Recorded Audio
Channels 71
Connecting an External Microphone or
External Audio Input Source to the
Camcorder 72
Using Line Input or an External
Microphone Connected to an INPUT
Terminal 72
Recording Audio to Channel 2 (CH2) 73
Audio Recording Level (INPUT
Terminals) 73
Adjusting the Microphone’s Sensitivity
(INPUT terminals) 74
Activating the Microphone’s Attenuator
(INPUT terminals) 74
Table of contents
6
Using the Built-in Microphone or an
External Microphone Connected to the
MIC Terminal 75
Switching the Input (MIC Terminal) 75
Audio Scenes 75
Audio Recording Level (Built-in
Microphone/MIC Terminal) 76
Microphone Directionality (Built-in
Microphone) 77
Audio Equalizer (Built-in Microphone) 78
Wind Screen (Built-in Microphone) 78
Microphone Attenuator (Built-in
Microphone) 79
Low Cut Filter (MIC Terminal) 79
Microphone Attenuator (MIC
Terminal) 80
Using Headphones 81
Color Bars/Audio Reference Signal 82
Recording Color Bars 82
Recording an Audio Reference
Signal 82
Video Snapshot 83
Pre-Recording 84
Onscreen Displays and Data Code 85
Infrared Recording 86
Activating Infrared Mode 86
Using the GP-E2 GPS Receiver 87
Connecting the GPS Receiver 87
4 Customization 89
CUSTOM Dial and Button 89
Assignable Buttons 90
Changing the Assigned Function 90
Using an Assignable Button 91
Saving and Loading Menu Settings 92
Saving Menu Settings to a Memory
Card 92
Loading Menu Settings from a Memory
Card 92
5 Playback 93
Playing Back Video 93
Adjusting the volume 94
Displaying scene information 95
Capturing Photos During Movie
Playback 96
Deleting Scenes 97
Deleting a Single Scene 97
Deleting Scenes from the Index
Screen 97
Dividing Scenes 99
Trimming Scenes 100
6 External Connections 101
Connecting to an External Monitor 101
Connection Diagram 101
o Selecting the Terminal Used For
Output 102
o Using the HD/SD-SDI
Terminal 102
Using the HDMI OUT Terminal 102
Using the AV OUT Terminal 103
Audio Output 104
Synchronizing the Video with the Audio
being Monitored 104
Selecting the Audio Channel 104
7Photos106
Viewing Photos 106
Photo Jump Function 107
Deleting Photos 108
Deleting a Single Photo 108
Deleting Photos from the Index
Screen 108
8 Saving/Sharing
Recordings 109
Saving Movies to a Computer 109
Transferring Movies to the
Computer 110
Copying Recordings Between Memory
Cards 111
Copying Scenes from the Movie Index
Screen 111
Copying a Single Photo 111
Copying Photos from the Index
Screen 112
Converting Movies to MP4 Format 113
Copying Recordings to an External Video
Recorder 114
In High Definition 114
In Standard Definition 114
7
9 Additional Information 116
Appendix: Menu Options Lists 116
FUNC. Menu 116
Setup Menus 117
Appendix: Onscreen Icons and
Displays 126
Troubleshooting 130
List of Messages 134
Safety Instructions and Handling
Precautions 139
Camcorder 140
Battery Pack 141
Memory Card 141
Built-in Rechargeable Lithium
Battery 142
Disposal 142
Maintenance/Others 143
Cleaning 143
Condensation 143
Viewing the Certification Logo 143
Using the Camcorder Abroad 144
Optional Accessories 145
Specifications 148
Reference Tables 151
Approximate recording times 151
Approximate number of photos 151
Charging, Recording and Playback
Times 152
Index 154
About this Manual
8
Introduction
About this Manual
Thank you for purchasing the Canon XA15 / XA11. Please read this manual carefully before you use
the camcorder and retain it for future reference. Should your camcorder fail to operate correctly, refer
to
Troubleshooting
(A 130).
Conventions Used in this Manual
IMPORTANT: Precautions related to the camcorder’s operation.
NOTES: Additional topics that complement the basic operating procedures.
POINTS TO CHECK: Restrictions or requirements regarding the function described.
A: Reference page number within this manual.
o: Used as an abbreviation for the model indicated in the icon. The icon refers to text and
illustrations that apply only to the indicated model.
The following terms are used in this manual:
“Memory card” refers to an SD, SDHC or SDXC memory card.
“Screen” refers to the LCD screen and the viewfinder screen.
“Scene” refers to one movie unit from the point you press the START/STOP button to start
recording until you press again to pause the recording.
The photos included in this manual are simulated pictures taken with a still camera. Unless indicated
otherwise, illustrations and menu icons refer to the o .
Some screenshots in this manual have been simplified to show only relevant icons.
IMPORTANT
Observe the following precautions while the camcorder’s ACCESS indicator is on or flashing. Failing
to do so may result in permanent data loss or damage to the memory.
- Do not disconnect the power source or turn off the camcorder.
- Do not open the double memory card slot cover.
- Do not change the camcorder’s camera mode.
- Do not set the camcorder to MEDIA mode.
- When a USB cable is connected to the camcorder, do not disconnect the USB cable.
1
Introduction
About this Manual
9
Focus Adjustment
Autofocus
When autofocus is activated, the camcorder continuously adjusts the focus on the subject in the
center of the screen. The focusing range is 1 cm (0.39 in.; at full wide-angle, measured from the front
of the lens barrel) to G and 60 cm (2 ft.; throughout the zoom range, measured from the front of the
lens barrel) to G. Perform the following procedure to set the autofocus speed.
1 and modes only: Press the AF/MF button.
2 Open the [AF Mode] screen.
[FUNC.] > [MENU] > p > [AF Mode]
3 Touch the desired option and then touch [X].
The icon of the selected option appears on the screen.
Operating modes:
Brackets [ ] are used to
refer to onscreen buttons
and menu options you will
select and to other
onscreen messages and
displays.
The three sets of icons indicate the operating
mode and whether a function is available in
that mode.
: Indicates whether the
camcorder is in shooting (CAMERA) or
playback (MEDIA) mode. In this example, the
function is available only in mode. For
details, refer to
Turning the Camcorder On
and Off
(A 24).
: Indicates the movie format. For
details, refer to
Selecting the Movie Format
(AVCHD/MP4)
(A 34).
: Indicates the camera
mode. For details, refer to
Setting the
Camera Mode
(A 25).
The > arrow is used to abbreviate menu
selections. For details on how to use the
menus, refer to
Using the Menus
(A 29).
For a summary of available menu options
and settings, refer to the appendix
Menu
Options Lists
(A 116).
Supplied Accessories
10
Supplied Accessories
The following accessories are supplied with the camcorder:
CA-570 Compact Power Adapter
(incl. power cord and ferrite core)
BP-820 Battery Pack Microphone holder unit
(incl. screws)
Handle unit (incl. screws) Lens hood with lens barrier Lens cap
Quick Guide
Names of Parts
11
Names of Parts
1 Lens barrier switch (A 35)
2 Memory card slot 2 (A 32)
3 Memory card slot 3 (A 32)
4 u (review recording) button (A 39)/
Assignable button 5 (A 90)
5 Lens hood (A 20)
6 Focus/Zoom ring (A 46, 51)
7 CUSTOM (customizable) dial (A 89)
8 CUSTOM (customizable) button
(A 89)
9 INFRARED switch (A 86)
10 Double memory card slot cover
11 DISP. (onscreen display) button
(A 85)/BATT. INFO (battery
information) button (A 129)
32
4
119108765
1
L
e
f
t s
id
e v
i
ew
Names of Parts
12
1 Built-in speaker (A 94)
2MIC terminal (A 71)
3HDMI OUT terminal (A 101, 102)
4 REMOTE terminal
For connecting commercially
available remote controllers.
5 o HD/SD-SDI terminal (A 102)
6 × (headphones) terminal (A 81)
7USB terminal (A 87)
8DC IN terminal (A 16)
9AV OUT terminal (A 101, 103)
10 Grip belt (A 22)
26
7
3
4
5
10
1
98
Ri
g
h
t s
id
e v
i
ew
Names of Parts
13
1 Instant AF sensor (A 48, 143)
2 AF/MF button (A 46)/
Assignable button 1 (A 90)
3 PRE REC (pre-recording) button
(A 84)/
Assignable button 2 (A 90)
4 LCD touch screen (A 21, 25)
5 Focus/Zoom ring switch (A 46, 51)
6 Viewfinder (A 20)
7 Dioptric adjustment lever (A 20)
8Joystick (A 26)/SET button (A 26)
9 Strap mount (A 22)
10 Assignable button 3 (A 90)
11 Assignable button 4 (A 90)
12 Battery attachment unit (A 16)
13 START/STOP button (A 35)
14 FUNC. button (A 26)
15 Serial number
1
45
6
7
8
9
14
15
13121110
3
2
F
ront v
i
ew
Back view
Names of Parts
14
1Power switch (A 24)
2 POWER / CHG (battery charging)
indicator (A 16)
3 Built-in stereo microphone
(A 71)
4 Accessory shoe
5Mode switch (A 25)
6 Camcorder zoom rocker (A 52)
7ACCESS indicator (A 35)
8 Handle unit mount (A 19)
9 Lens hood mount index mark
10 Tripod socket
For mounting the camcorder on a
tripod with a mounting screw 6.5 mm
or shorter.
11 BATTERY RELEASE switch (A 17)
12 Eye cup (A 20)
3
4
5
6
7
8
1
2
9
10
11
12
T
op v
i
ew
B
ottom v
i
ew
Names of Parts
15
Handle unit
1 Microphone holder unit (A 71)
2 Microphone lock screw (A 71)
3 Accessory shoe
For attaching accessories.
4 Handle zoom rocker (A 52)
5START/STOP lock (C) lever (A 38)
6START/STOP button (A 35)
7 Input selection switches for INPUT 1
and INPUT 2 (A 72)
8 INPUT terminal ON/OFF switch
(A 75)
9 Audio level switches for CH1 and
CH2 (A 73)
10 Audio level dials for CH1 and CH2
(A 73)
11 Microphone cable clamp (A 71)
12 INPUT 1 and INPUT 2 terminals
(collectively referred to as "INPUT
terminals") (A 72)
13 Infrared light (A 86)
14 Tally lamp (A 35)
15 Handle unit front screw (A 19)
16 Handle unit rear screws (A 19)
23 4 5 6 7 8 9 10
161514131211
1
Attaching the Ferrite Core
16
Prep aration s
Attaching the Ferrite Core
Attach the enclosed ferrite core before you connect the compact power adapter to the camcorder.
Attach the ferrite core to the cable about 6 cm from the DC plug
(the plug to be connected to the DC IN terminal).
Pass the cable through the center of the core and wrap it around the
core (as shown in the illustration), then close the unit until it clicks shut.
Charging the Battery Pack
The camcorder can be powered with a battery pack or directly using the compact power adapter.
1 Connect the power cord to the compact power
adapter.
2 Plug the power cord into a power outlet.
3 Connect the compact power adapter to the
camcorder’s DC IN terminal.
4 Attach the battery pack to the camcorder.
Press the battery pack softly into the battery attachment
unit and slide it forward until it clicks in place.
DC IN terminal
2
Preparations
Charging the Battery Pack
17
5 Charging will start when the camcorder is turned off.
If the camcorder was on, the green POWER/CHG indicator
will go out when you turn off the camcorder. After a
moment, the POWER/CHG indicator will turn on in red
(battery pack charging). The red POWER/CHG indicator will
go out when the battery pack is fully charged.
If the indicator flashes, refer to
Troubleshooting
(A 132).
6 Disconnect the compact power adapter in the order
shown in the illustration.
To remove the battery pack
1 Slide the BATTERY RELEASE switch in the direction of the
arrow and hold it pressed down.
2 Slide the battery pack and then pull it out.
POWER/CHG (battery charging) indicator
-4
-3
-1
-2
BATTERY
RELEASE
switch
Charging the Battery Pack
18
IMPORTANT
Turn off the camcorder before connecting or disconnecting the compact power adapter. After you
turn off the camcorder, important data is updated on the memory card. Be sure to wait until the
green POWER/CHG indicator goes out.
When using the compact power adapter, do not fix it permanently to one place as this may cause a
malfunction.
Do not connect to the camcorder’s DC IN terminal or to the compact power adapter any electrical
equipment that is not expressly recommended for use with this camcorder.
To prevent equipment breakdowns and excessive heating, do not connect the supplied compact
power adapter to voltage converters for overseas travels or special power sources such as those on
aircraft and ships, DC-AC inverters, etc.
For details on how to take care of the battery pack, refer to
Safety Instructions and Handling
Precautions
(A 139).
NOTES
We recommend charging the battery pack in temperatures between 10 °C and 30 °C. If either the
ambient temperature or the battery packs temperature is outside the range of approx. 0 °C to
40 °C, charging will not start.
The battery pack will be charged only when the camcorder is off.
If the power supply was disconnected while charging a battery pack, make sure the POWER/CHG
indicator has gone out before restoring the power supply.
If remaining battery time is an issue, you can power the camcorder using the compact power
adapter so the battery pack will not be consumed.
Charged battery packs continue to discharge naturally. Therefore, charge them on the day of use, or
the day before, to ensure a full charge.
The first time you use a battery pack, fully charge it and then use the camcorder until the battery
pack is completely exhausted. Doing so will ensure that the remaining recording time will be
displayed accurately.
We recommend that you prepare battery packs to last 2 to 3 times longer than you think you might
need.
For charging times and approximate usage times, refer to
Reference Tables
(A 151).
Preparing the Camcorder
19
Preparing the Camcorder
This section covers the basic preparations for the camcorder such as attaching the handle unit and
lens hood, and adjusting the viewfinder and LCD screen. When attaching the lens hood, grip belt and
straps, be careful not to drop the camcorder by placing it on a table or other stable surface.
Attaching the Microphone Holder Unit
Use the supplied screws to attach the microphone holder unit to
the handle unit.
Attaching the Handle Unit
1 Slide the front of the handle unit into the accessory
shoe, as shown in the illustration. Then, slide the handle
unit forward all the way.
Make sure the front and rear screws are raised when you
slide the handle unit.
2 Turn the front screw and two rear screws to secure the
handle unit.
NOTES
The camcorder is functional even if you remove the handle
unit. However, some audio options (A 71), the infrared light
and tally lamp will not be available.
Preparing the Camcorder
20
Using the Lens Hood and Lens Cap
While recording, the supplied lens hood with lens barrier is
effective for reducing stray light that can be the cause of lens
flare and ghost images. Additionally, closing the lens barrier
can help prevent fingerprints and dirt accumulation on the
lens.
1 Remove the lens cap.
2 Align the mark on the lens hood with the lens hood
mount index mark on the camera (
), and then turn
the lens hood clockwise until it stops with a click
().
Be careful not to deform the lens hood.
Make sure that the lens hood is aligned with the thread.
To remove the lens hood, turn it counterclockwise.
NOTES
Use the supplied lens cap when carrying the camcorder or storing it after use.
Note that the lens cap and the lens hood with lens barrier cannot be used simultaneously.
Using the Viewfinder
If it is difficult to use the LCD screen, you can use the viewfinder, which can be tilted 45 degrees
upward.
1 Close the LCD panel.
2 Pull out the viewfinder.
3 Use the power switch to turn on the camcorder.
4 Adjust the viewfinder using the dioptric adjustment
lever.
Dioptric
adjustment
lever
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157

Canon XA11 Manuale utente

Categoria
Videocamere
Tipo
Manuale utente
Questo manuale è adatto anche per

in altre lingue