Pyronix Matrix 424 Manuale utente

EN50131-1

Security Grade 2

Environmental Class 2

RINS915-2

ICON & LCD User Manual

Software Version 5

Matrix 424/832/832+

Matrix User Guide

RINS915-2 Page i

CONTENTS

CHAPTER 1: INTRODUCTION............................................................................................... 1

CHAPTER 2: REPLACING THE BATTERIES........................................................................ 2

CHAPTER 3: DISPLAYS ........................................................................................................ 3

3.1 LAYOUT & KEY OPERATION ............................................................................................................3

3.2 ICON SYMBOL MEANINGS................................................................................................................4

3.3 LCD SYMBOL MEANINGS................................................................................................................5

3.4 PROXIMITY READER LED MEANINGS ...............................................................................................5

3.5 KEY FOB SYMBOLS AND MEANINGS (KF4DW).................................................................................6

3.5.1 The KF4DW Actions ...............................................................................................................6

3.5.2 STATUS LEDS .......................................................................................................................6

3.6 HIDDEN DISPLAY MODE ..................................................................................................................7

3.7 LATCHING ALARMS – DENMARK, NORWAY, FINLAND & SWEDEN ONLY ............................................7

3.8 ARM MODES – SINGLE PARTITION...................................................................................................8

3.9 PARTITION INDICATIONS..................................................................................................................9

3.9.1 LCD Keypad – Multiple Partitions ...........................................................................................9

3.9.2 Icon Keypad..........................................................................................................................10

3.10 DISPLAYING SYSTEM FAULTS......................................................................................................12

3.10.1 Icon Keypad........................................................................................................................12

3.10.2 LCD Keypad .......................................................................................................................12

3.11 DISPLAYING OPEN ZONES...........................................................................................................13

3.12 LATCHING SYSTEM FAULTS – NORWAY, DENMARK, FINLAND & SWEDEN .....................................13

3.13 LATCHING BATTERY FAULT.........................................................................................................13

3.14 ANTI-CODE / ENGINEER RESET....................................................................................................13

CHAPTER 4: ARMING / DISARMING THE SYSTEM .......................................................... 14

4.1 ICON KEYPAD ...............................................................................................................................14

4.1.1 Arming – Single Partition User..............................................................................................14

4.1.2 Displaying the Armed Status ................................................................................................14

4.1.3 Disarming the System – Single Partition User......................................................................14

4.1.4 Latched Alarm Condition – Denmark, Finland, Norway & Sweden Only ..............................15

4.1.5 Anti-Code Reset ...................................................................................................................15

4.1.6 Arming – Multiple Partition User ...........................................................................................16

4.1.7 Displaying the Armed Status – Multiple Partition User .........................................................16

4.1.8 Disarming the System – Multiple Partition User....................................................................16

4.1.9 Latched Alarm Condition – Denmark, Finland, Norway & Sweden Only – Multiple Partition17

4.1.10 Anti-Code Reset – Multiple Partition User ..........................................................................17

4.2 LCD KEYPAD ...............................................................................................................................18

4.2.1 Arming – Single Partition User..............................................................................................18

4.2.2 Displaying the Armed Status – Single Partition User............................................................18

4.2.3 Disarming – Single Partition User.........................................................................................18

4.2.4 Latched Alarm Indication – Denmark, Norway, Finland & Sweden only – Single Partition...19

4.2.5 Anti-Code Reset – Single Partition User...............................................................................19

4.2.6 Arming – Multiple Partition User ...........................................................................................19

4.2.7 Displaying the Armed Status – Multiple Partition User .........................................................20

4.2.8 Disarming – Multiple Partition User ......................................................................................20

4.2.9 Latched Alarm Indication – Denmark, Norway, Finland & Sweden only – Multiple Partition 21

4.2.10 Anti-Code Reset – Multiple Partition User ..........................................................................21

4.3 PARTITIONS ..................................................................................................................................22

4.3.1 Part Sets Explained ..............................................................................................................22

4.3.2 Partitions Explained ..............................................................................................................22

4.3.3 Partition Dependency ...........................................................................................................22

4.4 DURESS ARMING / DISARMING ......................................................................................................23

4.4.1 Entering a Duress Code .......................................................................................................23

Matrix User Guide

Page ii RINS915-2

4.5 FAULT TONES...............................................................................................................................23

4.6 EMERGENCY SERVICES.................................................................................................................23

4.6.1 Activating a Fire Alarm..........................................................................................................23

4.6.2 Activating a Personal Attack (P.A) Alarm .............................................................................23

4.6.3 Activating a Medical Alarm ...................................................................................................23

CHAPTER 5: USER FUNCTIONS........................................................................................ 24

5.1 AVAILABLE USER FUNCTIONS .......................................................................................................24

5.2 ENTERING USER MODE.................................................................................................................25

5.3 EXITING USER MODE ....................................................................................................................25

5.4 ARM WITH OMITS ..........................................................................................................................26

5.5 DISPLAY LOG ...............................................................................................................................27

5.6 SET VOLUME ................................................................................................................................28

5.7 SET BACKLIGHT ...........................................................................................................................29

5.8 VIEW TIME AND DATE ...................................................................................................................30

5.9 CHANGE TIME...............................................................................................................................31

5.10 CHANGE DATE............................................................................................................................32

5.11 CHANGING/DELETING USER CODES AND ATTRIBUTES – ICON KEYPAD ........................................33

5.11.1 Changing/Deleting a Code..................................................................................................33

5.11.2 Add/Delete/Change Users ..................................................................................................33

5.12 CHANGING USER CODES AND ATTRIBUTES – LCD KEYPAD.........................................................35

5.12.1 Changing a User Code .......................................................................................................35

5.12.2 Editing User Codes and Attributes......................................................................................36

5.13 EDITING USER NAME – LCD KEYPAD ONLY ................................................................................39

5.14 ADJUSTING THE PROXIMITY VOLUME...........................................................................................41

5.15 ADDING/REMOVING PROXIMITY CARDS & TAGS...........................................................................42

5.16 ADDING / REMOVING KEY FOBS...................................................................................................43

5.17 PERFORMING AN NVM RESET ON A KEYFOB................................................................................44

5.18 SYSTEM TEST .............................................................................................................................45

5.19 ACTIVATING PGM FROM THE KEYPAD .........................................................................................45

5.20 UPLOAD/DOWNLOAD 1 HOUR WINDOW .......................................................................................46

5.21 ZONE TYPE DESCRIPTIONS .........................................................................................................47

CHAPTER 6: ZONE & PARTITION INDICATION TABLE ................................................... 48

CHAPTER 7: PROXIMITY READER.................................................................................... 49

7.1 INTRODUCTION.........................................................................................................................49

7.2 SINGLE PARTITION OPERATION.....................................................................................................49

7.2.1 Arming the Panel ..................................................................................................................49

7.2.2 Disarming the Panel .............................................................................................................50

7.3 MULTI-PARTITION OPERATION ......................................................................................................50

7.3.1 Arming the Panel ..................................................................................................................50

CHAPTER 8: THE KEYFOB................................................................................................. 51

8.1 INTRODUCTION .............................................................................................................................51

8.2 HOW TO USE THE KEYFOB .............................................................................................................51

8.3 STATUS LED ................................................................................................................................51

8.4 LOCKING A KEY FOB ....................................................................................................................51

CHAPTER 9: EVENT LOG TABLES.................................................................................... 52

9.1 ICON KEYPAD LOG TABLE ............................................................................................................52

9.2 LCD KEYPAD LOG TABLE.............................................................................................................54

9.3 VIEWING LOG AFTER A ZONE ALARM.............................................................................................56

Matrix User Guide

RINS915-2 Page 1

CHAPTER 1: INTRODUCTION

Thank you for buying the Matrix control panel, which uses the latest technology in design and manufacture. As

the end user of the Matrix security system, this manual has been written to help you use the many functions

available enabling you to get the best out of the Matrix alarm panel. Once you are familiar with the panel and its

functions, it is advisable to change the default Master User code.

The system can be operated in the following modes from which different options are available to the end user:

Master and Limited User Functions

Master Limited User Function Description

9 9

Arm with Omits Allows zones to be omitted whilst arming the panel

9 9

Display Log Allows you to view the event log

9 9

Set Volume Allows you to alter the volume setting for your keypad

9 9

Set Backlight Allows you to set the backlight intensity

9 9

View Time & Date Allows you to view the panel’s time and date settings

9 8

Change Time

Allows you to change the alarm panel time

9 8

Change Date

Allows you to change the alarm panel date

9 8

Edit User

Allows you to edit user types/attributes

9 8

Change Codes

Allows you to change a users code only

9 8

Edit User Name

Allows you to edit user names

9 8

Proximity Volume

Allows you to change the volume of a proximity reader

9 8

Proximity Cards

Allows you to add/delete proximity cards

9 8

Add keyfob

Allows you to add/delete key fobs

9 8

Pulse PGM 1

Allows you to activate a PGM output

9 8

1 Hr Active

Allows you to open a 1hour up/download time window

9 8

System Test

Allows you to perform a minimal keypad/panel test

NOTE: There are no user serviceable parts inside.

Quick Start

To Arm / Disarm via ICON go to page 14

To Arm / Disarm via LCD go to page 18

To Arm / Disarm via Prox go to page 49

To Arm / Disarm via keyfob go to page 51

Matrix User Guide

Page 2 RINS915-2

CHAPTER 2: REPLACING THE BATTERIES

The KX12DW, UT3DW and KF4DW will require there batteries to be changed at some point. As the batteries

are lithium ones extra care needs to be taken when removing/inserting batteries into the devices.

The batteries supplied have been chosen to provide long service life whilst, for safety reasons,

having limited output current.

Replace only with approved batteries.

To prevent possible damage to components, any static electrical charge on your body needs to be

eliminated before touching the inside of the unit. This can be accomplished by touching some

grounded/earthed metallic conductor such as a radiator/pipework immediately before replacing the

batteries.

The KX12DW and UT3DW

3.6 AA LITHIUM BATTERY

8

A

l

a

r

m

9

+

-

9

8

3.6 AA LITHIUM BATTERY

+

-

The KF4DW

CAUTION

Disposing Used Batteries

a) Ensure that you act in accordance with all applicable environmental regulations.

b) Do not open the battery or dispose of in a fire.

c) Small batteries can be attractive to small children and may be swallowed; take precautions.

d) Consult the information sheet supplied with the replacement battery

Matrix User Guide

RINS915-2 Page: 3

CHAPTER 3: DISPLAYS

3.1 Layout & Key Operation

Icon Keypad

LCD Keypad

Button Meanings

LL

Seven Segment Display

Shows zone numbers, partitions armed, system faults,

and event memory log number.



Personal Attack Alarm

Holding this button down for 2 seconds triggers an

immediate PA alarm.





Fire Alarm

Holding this button down for 2 seconds triggers an

immediate Fire alarm.





Medical button

Holding the medical button down for 2 seconds will trigger

an emergency alarm.







Numerical buttons

Functional buttons used for imputing user codes and user

programming.





Arm button

Used to change arm mode during exit delay



C

Function button

Used to enter / exit user mode and, save programming

options.



>@



Direction buttons

Direction keys are used to select options and view the

log.



Menu Button

Used to enter and exit menu mode.



Matrix User Guide

Page 4 RINS915-2

3.2 Icon Symbol Meanings

Disarmed Armed

Supply Personal Attack

Ready

Fire

Alarm Fault

Tamper

P1 P2

P3

P4

(( ))

Partitions

Rest of World Denmark, Norway, Finland & Sweden

Illuminated Correct AC & DC power sources AC power is OK

Blinking

DC source (battery) fault An AC fault

Extinguished

No AC power supplied to the panel No power to panel

Illuminated

OK to Arm, no open zones

Blinking

Select partitions to arm or disarm / Programming function is active

Extinguished

One or more open zones or all assigned partitions are already armed

Illuminated

Used in the Display Log function to qualify log information

Blinking

Active alarm in FTA mode. Digit display shows active zone

Extinguished

No alarm active

Illuminated

Indicates a tamper condition (used in log display)

Blinking

Indicates a tamper condition

Extinguished

No tamper alarm active

Illuminated

Indicates a PA alarm condition (used in log display)

Blinking

Indicates a PA alarm condition

Extinguished

No PA active

Illuminated

Indicates a Fire alarm condition (used in log display)

Blinking

Indicates a Fire alarm condition

Extinguished

No Fire alarm active

Illuminated

Indicates a system Fault

Blinking

Extinguished

No Fault active

Illuminated

The panel is armed

Blinking

The panel is arming with omitted zones

Extinguished

The panel is not armed

Illuminated

The panel is disarmed

Blinking

Extinguished

The panel is not disarmed

The P1, P2, P3 and P4 icons are used to show partition information as well as the partition segments.

Matrix User Guide

RINS915-2 Page: 5

3.3 LCD Symbol Meanings

LCD KEYPAD

OK

REST OF THE WORLD DENMARK, NORWAY, FINLAND &

SWEDEN

Illuminated

CORRECT AC & DC POWER

SOURCES

AC

POWER IS OK

Blinking Indicates DC source (battery) fault Indicates an AC fault

Extinguished Indicates AC fault / no power to panel No power to the panel

Illuminated

Indicates a system Fault

Blinking Engineers mode active

Extinguished No Fault active

Illuminated

OK to Arm, no open zones

Blinking Select partitions to arm or disarm / Programming function is active

Extinguished One or more open zones or all assigned partitions are already armed

3.4 Proximity Reader LED meanings

PROXIMITY READER

STATUS LEDS

Supply

MULTIPARTITION SINGLE

PARTITION

PARTITION 4 ARM MODE D

PARTITION 3 ARM MODE C

PARTITION 2 ARM MODE B

Partition 1 Arm mode A

Illuminated

CORRECT AC & DC POWER SOURCES

Blinking Indicates DC source (battery) fault

Supply

Extinguished Indicates AC fault / no power to panel

Illuminated

PARTITION OR ARM MODE IS ARMED

Blinking Partition or Arm mode is in Alarm

Status

LEDs

Extinguished Partition or Arm mode is Disarmed

Matrix User Guide

Page 6 RINS915-2

3.5 Key fob Symbols and Meanings (KF4DW)

3.5.1 The KF4DW Actions

Action Description

Arm Mode A Arm the panel in Arm Mode A

Arm Mode B Arm the panel in Arm Mode B

Arm Mode C Arm the panel in Arm Mode C

Arm Mode D Arm the panel in Arm Mode D

Disarm Disarm the panel (if currently armed or in First to Alarm)

RKP Controlled Output RKP controlled output*

Keyfob Controlled Output Keyfob controlled output*

Fire Alarm Creates a Fire Alarm

Medical Alarm Creates a Medical Alarm

Personal Attack Creates a Personal Attack

Not Used No Action

Quick Arm Mode A Quick arm part set A**

Quick Arm Mode B Quick arm part set B**

Quick Arm Mode C Quick arm part set C**

Quick Arm Mode D Quick arm part set D**

*Note 1: Key fob Controlled is a new programmable output type that can be only be assigned to key fob button

presses.

*Note 2: Quick arm is a new arming method. It does not display open zones whilst arming.

All programmed button actions are on a per partition basis. This means that Partitions 1, 2, 3 & 4 can have

totally different sets of button actions from each other. This also means that key fobs assigned to users will only

be active in one partition (the first partition if assigned to multiple partitions).

3.5.2 STATUS LEDS

The status LED on the key fob shows the status of the panel when any arm or disarm button is pressed. The

indications are shown below:

Panel Status LED Indication

Disarmed

Green for 3 seconds

Arming

Toggles Green/Red in 3 second bursts until armed

Armed

Red for 3 seconds

In Alarm

Flashing Green for 3 seconds

In FTA (First To Alarm)

Flashing Green for 3 seconds

Status LED

LOCK Button

(Button 1)

I Button

(Button 3)

UNLOCK Button

(Button 2)

II Button

(Button 4)

Matrix User Guide

RINS915-2 Page: 7

3.6 Hidden Display Mode

The Matrix alarm panel incorporates a hidden display (confidential mode) feature that can be enabled / disabled

by your installation engineer.

This feature hides all of the panel information from the keypad display if the keypad has not been used for the

last 20 seconds. In hidden display only the supply icon will be shown on the Icon keypad, and only the time &

date and supply LED will be displayed on the LCD keypad.

The keypad will remain in hidden display mode until a valid user code has been entered on the keypad.

Depending in which state the alarm panel is currently in, the first valid user code entry whilst in hidden display

mode will have the following effects on the panel.

When Disarmed

If there are no system faults then the panel will come out of hidden display mode and automatically start the

arming process.

If there are any system faults pending then the keypad will drop out of hidden display mode and allow the

system fault to display. The panel will not start the arming process until you re-enter your user code again.

When Armed

The panel will leave hidden display mode and start the disarm process.

For single partition keypad / user combinations this will result in a full panel disarm.

When In Alarm

The panel leave hidden display mode and drop into First To Alarm (FTA) mode.

When In First To Alarm (FTA) mode

If the keypad is allowed to drop back into hidden display mode whilst in FTA mode, then simply enter your user

code again to re-display the FTA information.

NOTE: When in User Menu mode the keypad will drop out of the user menu and then into

hidden display mode if no keys are pressed for 20 seconds. As long as a key is pressed at

least once every 20 seconds then user mode will remain active. Care must be taken not to

keep pressing invalid keystrokes as this may cause the alarm panel to interpret this as a

key tamper attempt and force the panel into a tamper alarm.

3.7 Latching Alarms – Denmark, Norway, Finland & Sweden only

After each and every alarm event the panel will display a latched alarm indicator, until you reset the latched

alarm yourself, by either viewing the event log or by re-arming the panel.

Latched alarms are only displayed in day mode and are indicated by a fast flashing bell on the Icon keypad and

by the message VIEW THE LOG on the LCD keypad.

To clear the latched alarm indicator, you can either view the event log using the View Log user function, or

alternatively by fully re-arming the panel again.

If hidden display mode is enabled the keypad will not hide until the latched alarm is cleared.

Matrix User Guide

Page 8 RINS915-2

3.8 Arm Modes – Single Partition

Icon Keypad LCD Keypad

If a keypad is allocated to only one of the four

available partitions then the arm mode in which this

partition is armed will be displayed, assuming hidden

display mode is not active.

If a keypad is allocated to only one of the four

available partitions then the arm mode in which this

partition is armed will be displayed, assuming hidden

display mode is not active.

Alternatively, the arm mode message may be

displayed if enable by your Engineer.

Partition is armed in Mode A

TIME/DATE

ARM MODE A

Partition is armed in Mode B

TIME/DATE

ARM MODE B

Partition is armed in Mode C

TIME/DATE

ARM MODE C

Partition is armed in Mode D

TIME/DATE

ARM MODE D

Partition is arming with Omits

TIME/DATE

ARM MODE !A

Matrix User Guide

RINS915-2 Page: 9

3.9 Partition Indications

If your alarm panel has been configured at install time to have more than one partition, you may display single

or multiple partition information, depending on a variety of options programmed by your installer. If your keypad

has been configured for a single partition use only, then you will not display partition information, except in anti

code reset.

3.9.1 LCD Keypad – Multiple Partitions

The following status will be displayed for each partition of a common keypad, assuming hidden display mode is

not active:

I

Alarm

%

Arming ! Arming With Omits

&

Armed # Reset Required

All partitions are disarmed Partition 1 is arming or selected to be armed

Partition 1 is armed Partition 1 in alarm condition

Partition 1 Engineer / Anti-code reset required Partition 1 arming with omits

Matrix User Guide

Page 10 RINS915-2

3.9.2 Icon Keypad

As well as the P1 – P4 icons, partition information is shown on the 7-segment displays, as this is easily visible

from a distance. Each of the two corner segments are assigned to a partition as shown below.

Partition 1 Partition 2

Partition 3 Partition 4

P1 P2

P3

P4

Single Partition Indications

The following displays are shown on the Icon keypad when the keypad is used to arm or disarm the panel when

configured as a single-partition system.

Disarmed

In Alarm

The DISARMED and

OK icons are

displayed.

The panel is ready for

arming.

The last open zone

number is displayed.

(Zone 1)

Arming

First To Alarm (FTA)

The DISARMED and

OK icons are

displayed.

The panel is arming in

arm mode A

(( ))

The BELL icon

flashes.

Zone 1 was the First

zone To Alarm (FTA)

Armed

Arming with Omits

The ARMED icon is

displayed.

The panel has armed

in mode A

The armed icon

flashes indicating

that the panel is

arming with omitted

zones.

Anti-Code Reset / Engineer Reset

(( ))

P1

(( ))

Partition 1 segments flash

alternately as shown.

Matrix User Guide

RINS915-2 Page: 11

Multiple Partition Indications

The following displays are shown when the keypad is used to arm or disarm the panel when configured as a

multi-partition system.

Please note that if you have a multi-partition installation, your keypad and user code may have been configured

for single partition operation only. If this is the case then please refer to single partition operation throughout this

manual.

Icon Keypad

Disarmed

In Alarm

The DISARMED and

OK icons are displayed.

The panel is ready for

arming.

The last open zone

number is displayed.

(Zone 1)

Choose Partitions

Choose FTA

OK icon flashes to

prompt you to enter the

partition(s) you want to

arm.

The OK icon flashes.

Partition in alarm

flashes.

Arming

First To Alarm (FTA)

P1 P2

P3

OK stops flashing.

Arming partitions 1, 2 &

3 flash.

(( ))

The BELL icon

flashes.

The first zone into

alarm in the partition

is displayed

Armed

P1 P2

P3

The ARMED icon is

displayed.

Partitions 1, 2, & 3 are

armed.

Anti-Code Reset / Engineer Reset

(( ))

P1

(( ))

Partition segments flash

alternately as shown.

Matrix User Guide

Page 12 RINS915-2

3.10 Displaying System Faults

3.10.1 Icon Keypad

When the Matrix detects a system fault, it displays the fault on the icon keypad (â). The fault takes the form of

a special symbol and a number. You can use this number to look up the actual fault by using the log table on

page 52. The system fault section of the log table has been repeated here for your convenience.

Example: System Fault 7

System Fault symbol

Fault number

Fault icon

When a system fault is displayed in day mode, the following table applies.

System Fault Description Icon

1 Bell fuse fail

â

2 Auxiliary fuse fail

â

3 Battery missing

â

4 Battery low voltage

â

5 Mains fail

â

6 Telephone line fail

â

7 Remote device has gone missing

â

8 Failed to report to central station

â

9 Battery fault on wireless expander

â

A Battery fault on keyfob(s)

â

B Jamming fault on wireless expander

â

C Detector signal low

â

D Detector signal has gone missing

â

While system faults are being displayed the keypad sounder periodically emits a low tone. This is to alert you to

the fault. Once you are aware of the fault you can silence the low tones by pressing the key once while the

fault is being displayed. If the fault is not cleared for a period of time then the sounder will re-start.

In hidden display mode the fault sounder cannot be silenced.

3.10.2 LCD Keypad

On an LCD keypad the system fault is automatically displayed on the display as shown below:

TIME/DATE

!BATTERY MISSING

While system faults are being displayed the keypad sounder periodically emits a low tone. This is to alert you to

the fault. Once you are aware of the fault you can silence the low tones by pressing the  key once while the

fault is being displayed. If the fault is not cleared for a period of time then the sounder will re-start.

In hidden display mode the fault sounder cannot be silenced.

Note: If the keypad has entered hidden display mode, only the time and date will be

displayed.

Matrix User Guide

RINS915-2 Page: 13

3.11 Displaying Open Zones

While the panel is disarmed, any open zones will be displayed on the keypad (zone number on 7-segment

display on Icon keypad, zone name preceded by the ‘!’ symbol on LCD keypad), as long as this feature has

been enabled by your installer. Since the keypad can only display one open zone at a time, use the > and ?

keys to display other open zones.

3.12 Latching System Faults – Norway, Denmark, Finland &

Sweden

All system faults are latched. This means that once a system fault has been triggered, the display will continue

to display the fault even if the fault is eventually removed from the system. To clear the latched fault, first

remove the fault then view the event log.

Once you have entered and then left the View Log function, and if the system fault is no longer active, the

system fault message and the VIEW THE LOG indication will be removed from the display.

3.13 Latching Battery Fault

Battery faults may be latched if enabled by your installation engineer. This means that once a battery fault has

occurred, the display will continue to display the fault even if the cause of the fault has been removed from the

system.

In this case you will need to contact your installation engineer to clear the battery fault from the display.

If your installation engineer has allowed you to reset battery faults, then the Latching System Faults procedure

above will allow you to clear the fault as discussed.

3.14 Anti-code / Engineer Reset

If your installer has enabled anti-code or Engineer reset, after an alarm condition you will be unable to re-arm

the panel until a reset code has been entered.

Icon Keypad

(( ))

P1

(( ))

LCD Keypad

Single Partition Multiple Partitions

Press the C key to display the anti-code seed number. This should be passed on to your central monitoring

station, who will in turn provide you with a corresponding reset code.

Enter the code on your keypad.

The system will return to normal operation.

Matrix User Guide

Page 14 RINS915-2

CHAPTER 4: ARMING / DISARMING THE SYSTEM

This section details how to arm and disarm a Matrix system using both the Icon and LCD keypads. As with most

Matrix features there are always possible variations depending on how the Matrix features have been

programmed by your installer.

These instructions assume the default user code (TUV) is being used to arm/disarm the panel. If your user

code is different, then substitute your user code in place of the one described here.

4.1 Icon Keypad

4.1.1 Arming – Single Partition User

To arm the system all zones must be closed (y icon displayed). To arm the system with open zones, refer to

the Arm With Omits function on page 26.

Enter you personal user code TUV.

If your code has been accepted, you will hear a confirmation tone and the system will start arming in arm mode

A. The exit tones will sound indicating that arming has commenced.

To change the arm mode press the C key followed by the arm mode you require (A, B, C or D). The system will

re-configure for the new arm mode.

You must leave the premises by the designated route.

At the end of the exit timer the system will arm.

Some installations require that a push button switch be pressed before the panel finally arms.

Disarmed

Arming

Armed

4.1.2 Displaying the Armed Status

Once the system has armed, the Icon keypad will either display the arm mode (A, B, C or D), or it will display

nothing at all. This depends on how the Matrix features have been programmed by your installer.

If hidden display mode is enabled only the supply icon ({) will operate.

4.1.3 Disarming the System – Single Partition User

Enter you personal user code TUV.

No Alarm Condition

If your code has been accepted, you will hear a confirmation tone and the system will disarm. The Icon keypad

will revert to normal day mode operation.

After an Alarm Condition

If your code has been accepted, you will hear a confirmation tone and the system will go into First To Alarm

(FTA) mode.

Matrix User Guide

RINS915-2 Page: 15

First To Alarm (FTA) Mode

The bell icon (z) flashes slowly indicating that you are in FTA mode. This mode allows you to view the first

zone that went into, and thus caused, the alarm. If the keypad enters hidden display mode whilst in FTA mode,

simply re-enter your user code to re-display the FTA information.

To fully disarm, enter you personal user code TUV. If your code has been accepted, you will hear a

confirmation tone and the system will disarm. The ICON keypad display will revert to normal day mode

operation.

Alarm (Zone 1) FTA (Zone 1) Disarmed

(( ))

4.1.4 Latched Alarm Condition – Denmark, Finland, Norway & Sweden Only

A special indication will appear on the ICON display after any valid alarm has been successfully disarmed. The

ICON keypad will flash the bell icon (z) at twice the normal rate. Whilst this display is active, the keypad will not

enter hidden display mode (if hidden display mode is enabled).

This is to prompt you to check the event log. To stop the bell icon (z) flashing you must use the user function

View Log described on page 27. Alternatively, enter a valid user code to re-arm the panel. Once armed, the

previous latched alarm will be cleared.

4.1.5 Anti-Code Reset

If your system has anti code reset enabled, the top left partition segments will flash alternately. The P1 icon will

also flash, indicating that partition 1 is in anti-code reset.

You will be unable to re-arm your alarm panel until an anti-code number has been entered. Press the C key to

display the anti code seed number. The number is displayed one digit at a time. This number should be passed

onto your central monitoring station, who will in turn provide you with a corresponding anti code number.

Enter this anti code number on your keypad (after pressing the C key).

Your system will return to normal operation.

If the keypad drops into hidden display mode, re-enter your user code to unhide the display and press the C

key to re-display the anti-code seed number.

Matrix User Guide

Page 16 RINS915-2

4.1.6 Arming – Multiple Partition User

To arm the system all zones must be closed, (y icon displayed). To arm the system with open zones, refer to

the Arm With Omits function on page 26.

Enter you personal user code TUV.

If your code has been accepted you will hear a confirmation tone and the OK icon (y) will start to flash. This

indicates that you should enter the number(s) of the partition(s) you wish to arm.

Enter the partition(s) you wish to arm by pressing the  - V keys on the keypad. Partitions that you have

selected for arming will flash on the icon display. When you have made your final selection(s) press the key

to confirm. The exit tones will sound indicating that arming has commenced.

You must leave the premises by the designated route.

At the end of the exit timer the system will arm. Some installations require that a push button switch be pressed

before the panel finally arms.

Disarmed Select Partitions Arming Armed

P1 P2

P3

P1 P2

P3

4.1.7 Displaying the Armed Status – Multiple Partition User

Once the system is armed the icon keypad will either display the armed partitions or it will display nothing at all.

This depends on how the Matrix features have been programmed by your installer.

If hidden display mode is enabled only the supply icon ({) will operate.

4.1.8 Disarming the System – Multiple Partition User

This section describes how to disarm your system under various panel states.

No Alarm Condition

Enter you personal user code TUV.

If your code has been accepted, you will hear a confirmation tone and the OK icon (y) will flash. All armed

partitions are displayed. At this point you can arm or disarm any partitions allocated to you. Select the

partition(s) you wish to disarm. The selected partition segments will be removed from the icon display.

Once you have selected all the partition(s) to disarm, press the key to confirm them. The partition(s) will

disarm.

After an Alarm Condition

Enter you personal user code TUV.

If your code has been accepted you will hear a confirmation tone and the OK icon (y) will flash. All armed

partitions are displayed. At this point you can arm or disarm any partitions allocated to you. All partitions in

alarm will be flashing.

Select the partition(s) you wish to disarm and press the key. The system will go into First To Alarm (FTA)

mode.

La pagina sta caricando ...

Pyronix Matrix 424 Manuale utente

Questo manuale è adatto anche per

Pyronix Matrix 424 Manuale utente

in altre lingue

Documenti correlati

Altri documenti