Motorola HX550 Manuale utente

Motorola Mobility, Inc. and the Stylized M Logo are trademarks or registered

trademarks of Motorola Mobility, Inc. Trademark Holdings, LLC. All other

product or service names are the property of their respective owners.

The Bluetooth trademark and logos are owned by the Bluetooth SIG, Inc.

and any use of such marks by Motorola Mobility, Inc. is under license.

68014301110

motorola.com

MOTOROLA HX550

Motorola Mobility, Inc. and the Stylized M Logo are trademarks or registered

trademarks of Motorola Mobility, Inc. Trademark Holdings, LLC. All other

product or service names are the property of their respective owners.

The Bluetooth trademark and logos are owned by the Bluetooth SIG, Inc.

and any use of such marks by Motorola Mobility, Inc. is under license.

68014301110

MOTOROLA HX550

1

Figure 1

Figure 2

1

2

3

4

5

6

7

8

9

2

Figure 3



2

1

English

3

Congratulations

Your Motorola HX550 Bluetooth headset delivers everything you need to stay

connected including clear calls, hands-free texting, and custom comfort.

We’ve crammed all of the main features of your headset into this handy

guide, and in a matter of minutes you’ll see how easy your headset is to use.

Your headset

Take a moment to familiarise yourself with your new Bluetooth headset.

See ﬁgure 1 on page 1.

1 Ear hook

2 Micro-USB charging connector

3 Microphone

4 Call button

5 Volume button (on side)

6 Status light (on side)

7 Boom

8 Microphone

9 Ear speaker

English

4

Charge it

See ﬁgure 2 on page 1.

Charge your headset before using it. Headset is not functional while charging.

Status light

Red/Yellow = charging

Green = fully charged

Note: Your battery is designed to last the life of your product. It should only

be removed by a recycling facility. Any attempt to remove or replace your

battery will damage your headset.

A few essentials to get you started

Turn on & off

To turn headset on: ﬂip the boom to the open/extended position

To turn headset off: ﬂip the boom to the closed/folded position

Change voice interface setting

Your headset supports English voice prompts by default.

You can select a different language or turn the voice interface off through

the settings menu: press and hold the Call button while turning on the

headset and follow the voice prompts to make changes.

Note: other features can be changed or turned on/off in the settings menu:

• Caller ID

• Multipoint (two phone) connections

• WBS (Wide-band Audio) on/off

• Reset to factory default

Caution: This action erases all pairing information stored in your headset.

English

5

Wear it

You can optimise the ﬁt of your headset with the on-ear hook, in-ear hook or

ear gels with no hook.

See ﬁgures 3 on page 2.

1

On-ear hook

• Rotate and turn the on-ear hook for left or right use.

• Look the hook over your ear, and point the headset microphone towards

your mouth.

2

In-ear hook

• Rotate and turn the on-ear hook for left or right use.

• Fit in-ear hook onto earpiece.

• Loop the hook over your ear, and point the headset microphone towards

your mouth.



Ear gel

• Remove on-ear hook from headset.

• Fit the ear gel on the ear piece and place it on your ear by placing the loop

in the bend of your ear.

English

6

Pair & connect

Pair & connect with your phone

1 Turn off any Bluetooth devices previously paired with your headset.

2 Turn on the Bluetooth feature on your phone.

3 Turn on your headset and put it on your ear.

The indicator light becomes steadily lit in blue and you hear “Welcome to

the Motorola HX550. Ready to pair”.

4 Follow the voice prompts to connect your phone to your headset.

Note: If prompted for the passkey, enter 0000.

When your headset successfully pairs with your phone, you hear “pairing

complete”. When connected, you hear “phone 1 connected” and the

indicator light rapidly ﬂashes blue and purple.

Pairing with voice prompts turned off

Follow pairing instructions until step 3, then:

• go to the Bluetooth menu on your phone and look for devices.

• select MOTOROLA HX550.

When your headset successfully pairs with your phone, the indicator light

ﬂashes purple and blue and you hear 2 ascending tones.

Pair & connect a second phone (Optional)

1 Turn off ﬁrst phone and any other Bluetooth devices previously paired

with your headset.

2 Turn your headset off.

3 Turn on the Bluetooth feature on your phone.

English

7

4 Turn on your headset and put it on your ear.

The indicator light becomes steadily lit in blue and you hear “ready to

pair”.

5 Follow the voice prompts to connect your phone to your headset.

When your headset successfully pairs with your phone, you hear“pairing

complete”. When connected, you hear“phone 1 connected” and the

indicator light rapidly ﬂashes in blue and purple.

To connect to both phones, simply turn on the ﬁrst phone while the second

phone is connected. When you hear “phone 2 connected”, your headset is

connected to both phones. The last paired phone (your second phone) is

now your primary phone (or “phone 1”) for voice dial functionality.

Tip: You have 20 seconds to turn on your ﬁrst phone. If reconnection fails,

turn your headset off and on.

Pairing with voice prompts turned off

Follow pairing instructions until step 4, then:

• go to the Bluetooth menu on your phone and look for devices.

• select MOTOROLA HX550.

To connect to both phones, simply turn on the ﬁrst phone while the second

phone is connected. When you hear 2 ascending tones, your headset is

connected to both phones.

Test your connection

Place the headset on your ear and make a call from the phone(s). If your

phone(s) and headset are successfully connected, you hear ringing in

the headset. For daily use, make sure your headset is turned on, and your

phone’s Bluetooth feature is on. Your headset and phone will connect

automatically!

English

8

Calls

Note: Some features and phone/network dependent.

Function Action

Answer call Press the Call button.

End a call Press the Call button.

Reject call Press and hold a Volume button until you hear

an audio tone.

Make a voice dial call Press the Call button and you hear an audio tone.

Redial last call Press and hold the Call button until you hear an

audio tone.

Mute or unmute a call Press and hold both Volume buttons until you hear

“mute on” or “mute off”.

Headset with voice prompts off: press and hold

both volume buttons until you hear 1 ascending

tone (for mute on) and 1 descending tone (for mute

off).

Answer second incoming call Press the Call button.

Reject second incoming call Press and hold a Volume button until you hear a

tone.

Tip: When connected to two phones, follow the voice prompts to perform

functions such as voice dial and redial on the desired phone.

English

9

Caller ID

If your phone knows your caller’s number, then you hear “call from

<number>” on an incoming call.

Talk time

Press and hold both Volume buttons while not on a call.

Status light Voice prompt Remaining talk time

red “battery level is low” less than 1.5 hours

yellow “battery level is medium” between 1.5 to 3.5 hours

green “battery level is high” more than 3.5 hours

To save battery power, turn off the headset when you don’t use it for an

extended time.

English

10

Status light

Status light Status

3 blue ﬂashes Powering on/off

Steady blue Pairing/connect mode

Rapid blue/purple ﬂashes Connection successful

Quick blue ﬂash Incoming/outgoing call on phone 1

Quick purple ﬂash Incoming/outgoing call on phone 2

Slow blue pulse Connected (on a call)

Slow blue ﬂash Standby (connected to one phone)

Slow green ﬂash Standby (connected to two phones)

Slow red ﬂash Idle (not connected to a phone)

Slow purple pulse Connected call muted

Steady red Attempting to connect

quick red ﬂash Low battery

Steady purple In settings mode

Note: After 1 minute on a call or 20 minutes of inactivity, the light stops

ﬂashing to conserve power, but the headset remains on. Closing the boom

will also save battery life.

English

11

Problems?

My headset will not enter pairing mode.

Make sure that any devices previously paired with the headset are turned

off. If the indicator light is ﬂashing in blue, ﬁrst turn off the other device, then

turn the headset off and on. The indicator light becomes steadily lit in blue

and you hear “ready to pair”.

My phone doesn’t ﬁnd my headset when searching.

Make sure the indicator light on your headset is steadily lit in blue when your

phone is searching for devices. If not, press and hold the Call button and both

Volume buttons until you hear “Welcome to the Motorola HX550. Ready to

pair” or see the indicator light steadily lit in blue.

My headset will not pair with my phone.

If the indicator light is not steadily lit in blue when your phone is searching

for your headset, you can reset the headset by pressing and holding the Call

button and both Volume buttons until you hear “Welcome to the Motorola

HX550. Ready to pair” or see the indicator light steadily lit in blue. Then

follow pair & connect instructions.

My headset connected before, but now it’s not working.

Make sure your phone is on and the Bluetooth feature is turned on in

your phone. If the Bluetooth feature was turned off or was turned on only

temporarily, you may need to restart the Bluetooth feature and pair your

phone and headset again.

If you have any additional questions, please call your hotline number

(0870-9010-555) or visit us at www.motorola.com .

English

12

European Union Directives Conformance Statement

Hereby, Motorola Mobility Inc., declares that this product is in

compliance with the essential requirements and other relevant

provisions of Directive 1999/5/EC.

You can view your product’s Declaration of Conformity (DoC) to Directive

1999/5/EC (the R&TTE Directive) at www.motorola.com/rtte.

Caring for the Environment by Recycling

When you see this symbol on a Motorola product, do not dispose of

the product with household waste.

Recycling Mobile Phones and Accessories

Do not dispose of mobile phones or electrical accessories, such as chargers

or headsets, with your household waste. In some countries or regions,

collection systems are set up to handle electrical and electronic waste

items. Contact your regional authorities for more details. If collection systems

aren’t available, return unwanted mobile phones or electrical accessories to

any Motorola Approved Service Centre in your region.

FCC Notice to Users

FCC Notice The following statement applies to all products that have

received FCC approval. Applicable products bear the FCC logo, and/or an

FCC ID in the format FCC-ID:xxxxxx on the product label.

Motorola has not approved any changes or modiﬁcations to this device by

the user. Any changes or modiﬁcations could void the user’s authority to

operate the equipment. See 47 CFR Sec. 15.21.

This device complies with part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation. See 47 CFR Sec.

15.19(3).

English

13

European Union Directives Conformance Statement

Hereby, Motorola Mobility Inc., declares that this product is in

compliance with the essential requirements and other relevant

provisions of Directive 1999/5/EC.

You can view your product’s Declaration of Conformity (DoC) to Directive

1999/5/EC (the R&TTE Directive) at www.motorola.com/rtte.

Caring for the Environment by Recycling

When you see this symbol on a Motorola product, do not dispose of

the product with household waste.

Recycling Mobile Phones and Accessories

Do not dispose of mobile phones or electrical accessories, such as chargers

or headsets, with your household waste. In some countries or regions,

collection systems are set up to handle electrical and electronic waste

items. Contact your regional authorities for more details. If collection systems

aren’t available, return unwanted mobile phones or electrical accessories to

any Motorola Approved Service Centre in your region.

FCC Notice to Users

FCC Notice The following statement applies to all products that have

received FCC approval. Applicable products bear the FCC logo, and/or an

FCC ID in the format FCC-ID:xxxxxx on the product label.

Motorola has not approved any changes or modiﬁcations to this device by

the user. Any changes or modiﬁcations could void the user’s authority to

operate the equipment. See 47 CFR Sec. 15.21.

This device complies with part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation. See 47 CFR Sec.

15.19(3).

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment to an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Approved Accessories

Use of accessories not approved by Motorola, including but not limited to

batteries, antennas, and convertible covers, may cause your mobile device

to exceed RF energy exposure guidelines and may void your mobile device’s

warranty.

Motorola recommends that you always use Motorola-branded chargers.

Motorola devices are designed to work with Motorola chargers.

For approved Motorola accessories, visit our Web site at: www.motorola.com

Use & safety for battery-powered accessories

Your battery is designed to last the life of the product. It should only be

removed by a recycling facility. ANY ATTEMPT TO REMOVE OR REPLACE

YOUR BATTERY WILL DAMAGE THE PRODUCT.

• Battery life may temporarily shorten in low-temperature conditions (-10°C

for storage/use below 0°C for recharge) or permanently reduce in high

temperature conditions (above 60°C for storage/use or above 45°C for

recharge).

English

14

• Do not let your mobile device get wet.

• Do not store your accessory in a parked car or direct sunlight.

WARNING: MAY EXPLODE IF DISPOSED OF IN FIRE.

Driving Precautions

Check and obey the laws and regulations on the use of mobile devices in the

area where you drive. The use of wireless devices and their accessories in

your area may be prohibited or restricted. The use of wireless phones while

driving may cause distraction. Discontinue a call if you can’t concentrate on

driving. When using your mobile device while driving, please:

• Give full attention to driving and to the road.

• Use your hands-free solution to perform hands-free calls.

• Pull off the road and park before making or answering a call if driving

conditions so require.

Caution about high volume usage

Warning: Exposure to loud noise from any source for extended periods of

time may temporarily or permanently affect your hearing. The louder the

volume sound level, the less time is required before your hearing could be

affected. Hearing damage from loud noise is sometimes undetectable at ﬁrst

and can have a cumulative effect. To protect your hearing:

• Start your volume control at a low setting and use as low a volume as

possible.

• Limit the amount of time you use headsets or headphones at high volume.

• Where possible, use your headset in a quiet environment with low

background noise.

• Avoid turning up the volume to block out noisy surrounding.

• Turn the volume down if you can’t hear people speaking near you.

If you experience hearing discomfort, including the sensation of pressure or

fullness in your ears, ringing in your ears, or mufﬂed speech, you should stop

listening to the device through your headset or headphones and have your

hearing checked by your doctor.

Félicitations

Votre oreillette Bluetooth Motorola HX550 vous offre tout ce dont vous avez

besoin pour rester connecté : appels clairs, envoi de messages texte sans

utiliser de clavier et options de port à l’oreille pour un confort d’utilisation.

Les principales fonctions de votre oreillette sont présentées dans ce guide

pratique. En quelques minutes, vous découvrirez à quel point votre oreillette

est simple à utiliser.

Votre oreillette

Prenez le temps de vous familiariser avec votre nouvelle oreillette Bluetooth.

Voir ﬁgure 1, page 1.

1 Tour d’oreille

2 Connecteur de charge micro-USB

3 Microphone

4 Touche d’appel

5 Touche de volume (sur le côté)

6 Témoin d’état (sur le côté)

7 Tige-micro déployable

8 Microphone

9 Écouteur

Français

15

Félicitations

Votre oreillette Bluetooth Motorola HX550 vous offre tout ce dont vous avez

besoin pour rester connecté : appels clairs, envoi de messages texte sans

utiliser de clavier et options de port à l’oreille pour un confort d’utilisation.

Les principales fonctions de votre oreillette sont présentées dans ce guide

pratique. En quelques minutes, vous découvrirez à quel point votre oreillette

est simple à utiliser.

Votre oreillette

Prenez le temps de vous familiariser avec votre nouvelle oreillette Bluetooth.

Voir ﬁgure 1, page 1.

1 Tour d’oreille

2 Connecteur de charge micro-USB

3 Microphone

4 Touche d’appel

5 Touche de volume (sur le côté)

6 Témoin d’état (sur le côté)

7 Tige-micro déployable

8 Microphone

9 Écouteur

Français

16

Charge

Voir ﬁgure 2, page 1.

Chargez votre oreillette avant de l’utiliser. Vous ne pouvez pas utiliser

l’oreillette pendant sa charge.

Témoin d’état

Rouge/Jaune = en cours de charge

Vert = charge terminée

Remarque : la batterie de votre produit a été conçue pour fonctionner

pendant toute la durée de vie de celui-ci. Seul un centre de recyclage

est autorisé à extraire la batterie. Toute tentative d’extraction ou de

remplacement de la batterie endommagera votre oreillette.

Quelques bases pour commencer

Mise sous/hors tension

Pour allumer l’oreillette: déployer la tige micro

Pour éteindre l’oreillette: replier la tige-micro

Modiﬁcation du paramètre de l’interface vocale

Par défaut, votre oreillette prend en charge les instructions vocales en anglais.

Vous pouvez sélectionner une autre langue ou désactiver l’interface vocale

via le menu des paramètres : appuyez sur la touche d’appel et maintenez-la

enfoncée tout en mettant l’oreillette sous tension, puis suivez les instructions

vocales aﬁn de procéder aux modiﬁcations.

Remarque : il est possible de modifier ou d’activer/désactiver d’autres

fonctions dans le menu des paramètres :

• Identication de l’appelant

• Connexions multipoint (deux téléphones)

• Activer/désactiver WBS (Téléphonie à large bande)

• Restaurer les paramètres congurés par défaut

Attention : cette opération entraîne la suppression de toutes les

informations préalablement enregistrées sur votre oreillette.

Français

17

Installation de votre oreillette

Vous avez la possibilité de porter l’oreillette de différentes manières : avec

le tour d’oreille seul, avec le tour d’oreille et un support intra-auriculaire ou

avec un embout gel seul.

Voir ﬁgures 3, page 2.

1 Avec tour d’oreille

• Tournez le tour d’oreille an de l’adapter à une utilisation à l’oreille droite

ou gauche.

• Placez le tour d’oreille autour de votre oreille et orientez le microphone

vers votre bouche.

2 Avec le tour d’oreille et support intra-auriculaire

• Tournez le tour d’oreille an de l’adapter à une utilisation à l’oreille droite

ou gauche.

• Ajoutez le support intra-auriculaire à l’écouteur.

• Placez le tour d’oreille autour de votre oreille et orientez le microphone

vers votre bouche.

 Avec un embout gel

• Enlevez le tour d’oreille de l’oreillette.

• Ajoutez l’embout gel à l’écouteur et placez-le dans l’oreille en insérant

l’anneau gel dans le creux de l’oreille.

La pagina sta caricando ...

Motorola HX550 Manuale utente

Motorola HX550 Manuale utente

in altre lingue

Documenti correlati

Altri documenti