Multitech MT5600BA–V.92 Manuale utente

MT5600BA/BL Series

MT5600BA–V.92

MT5600BA–V.90

MT5600BL–V.90

Data/Fax Modem

User Guide

2

Multi-Tech Systems, Inc. MT5600BA/BL Series User Guide (S000276E)

MultiModemII User Guide

MT5600BA–V.92, MT5600BA–V.90, MT5600BL–V.90

P/N S000276E Revision E

written permission from Multi-Tech Systems, Inc.

Multi-Tech Systems, Inc. makes no representations or warranties with respect to the contents hereof and

specifically disclaims any implied warranties of merchantability or fitness for any particular purpose.

Furthermore, Multi-Tech Systems, Inc. reserves the right to revise this publication and to make changes

in the content hereof without obligation of Multi-Tech Systems, Inc. to notify any person or organization of

such revisions or changes.

Record of Revisions

Revision Date Description

A 10/03/02 Initial release of MT5600BA Global V.92. (Also replaces S0000129 Rev. C - the

MT5600BA/BL User Guide).

B 02/17/03 Changed cover. Changed text to indicate that the following

are

implemented:

V.25bis HDLC NRZ?

,

V.25bis HDLC NRZI?

,

and V.25bis BISYNC

C 07/31/03 Added setting the country code using the LCD panel. Add country codes list.

D 05/28/04 Change the word to

country

to

country or region

.

E 12/09/04 Add Web site location of the country/region code list.

Trademarks

MultiModemII, Multi-Tech, and the Multi-Tech logo are trademarks of Multi-Tech Systems, Inc.

Adobe and Acrobat are trademarks of Adobe Systems Incorporated. Microsoft, Windows, Windows 98/

Me/NT/2000/XP are either registered trademarks or trademarks of Microsoft Corporation in the United

States and/or other countries. All other brand and product names mentioned in this publication are

trademarks or registered trademarks of their respective companies.

Warranty

For Multi-Tech Warranty, see Multi-Tech Web site at http://www.multitech.com/COMPANY/Policies/warranty/

Patents

This device is covered by one or more of the following patents: 6,031,867; 6,012,113; 6,009,082;

5,905,794; 5,864,560; 5,815,567; 5,815,503; 5,812,534; 5,809,068; 5,790,532; 5,764,628; 5,764,627;

5,754,589; 5,724,356; 5,673,268; 5,673,257; 5,644,594; 5,628,030; 5,619,508; 5,617,423; 5,600,649;

5,592,586; 5,577,041; 5,574,725; 5,559,793; 5,546,448; 5,546,395; 5,535,204; 5,500,859; 5,471,470;

5,463,616; 5,453,986; 5,452,289; 5,450,425; D353,598; 5,355,365; 5,309,562; 5,301,274. Other patents

pending.

World Headquarters

Multi-Tech Systems, Inc.

2205 Woodale Drive

Mounds View, MN 55112 U.S.A

Technical Support

Country By Email By Phone

Europe, Middle East, Africa: [email protected] +(44) 118 959 7774

U.S., Canada, all others: [email protected] (800) 972-2439 or (763) 717-5863

Internet Address: http://www.multitech.com

3

MultiModemII User Guide Table of Contents

Multi-Tech Systems, Inc. MT5600BA/BL Series User Guide (S000276E)

Table of Contents

Chapter 1 - Description and Features ......................................................................... 5

Product Description .............................................................................................. 5

About AT Commands ........................................................................................... 5

Features ............................................................................................................... 5

Safety Warnings................................................................................................... 6

Chapter 2 - Installation ............................................................................................... 7

Step 1 - Connect the Modem to Your System ...................................................... 7

Step 2 - Install the Modem Driver ......................................................................... 9

Removing an Old Modem Driver .......................................................................... 9

Step 3 - Setting Your Country or Region Code ................................................... 10

Step 4 - Install PhoneTools ................................................................................ 11

Chapter 3 - Using the Front Panel ............................................................................ 12

Modem Configuration ......................................................................................... 12

LED Indicators ................................................................................................... 12

Liquid Crystal Display (LCD) .............................................................................. 13

Option Selection .......................................................................................... 13

Menu Structure ............................................................................................ 13

Menu Overview .................................................................................................. 14

Status Trunk ................................................................................................. 15

Basic Options Trunk ..................................................................................... 16

Advanced Options Trunk .............................................................................. 18

Remote Configuration Options Trunk ........................................................... 20

Diagnostic Options Trunk ............................................................................. 20

Phone Number Memory Options Trunk ........................................................ 21

Caller ID Options Trunk ................................................................................ 21

Menu Options .............................................................................................. 22

Status .......................................................................................................... 22

Basic Options .............................................................................................. 23

Advanced Options ....................................................................................... 25

Remote Configuration Options..................................................................... 27

Diagnostic Options ...................................................................................... 27

Phone Number Memory Options ................................................................. 27

Caller ID Options ......................................................................................... 28

Chapter 4 - Leased Line Operation .......................................................................... 29

Two-Wire Setup ................................................................................................. 29

Four-Wire Setup ................................................................................................. 30

Dial Backup and Leased-Line Restoral .............................................................. 31

Dial Backup and Leased Line Restoral Setup .................................................... 31

Chapter 5 - Remote Configuration ............................................................................ 33

Basic Procedure................................................................................................. 33

Setup ................................................................................................................. 33

Changing the Remote Configuration Password.................................................. 33

Changing the Remote Escape Character ........................................................... 34

Chapter 6 - Callback Security ................................................................................... 35

Setup Procedures .............................................................................................. 35

Turning Callback Security On and Off ................................................................ 35

Assigning Callback Passwords .......................................................................... 36

Calling Procedure .............................................................................................. 38

Callback Security Commands ............................................................................ 39

Callback Assignments Form .............................................................................. 40

4

MultiModemII User Guide Table of Contents

Multi-Tech Systems, Inc. MT5600BA/BL Series User Guide (S000276E)

Chapter 7 - Troubleshooting ..................................................................................... 41

None of the Indicators Light ............................................................................... 41

The Modem Does Not Respond to Commands .................................................. 42

The Modem Cannot Connect When Dialing ....................................................... 43

The Modem Disconnects While Online .............................................................. 44

The Modem Cannot Connect When Answering ................................................. 45

File Transfer Is Slower Than It Should Be .......................................................... 45

Data Is Being Lost .............................................................................................. 45

There Are Garbage Characters on the Monitor .................................................. 46

The Modem Doesn’t Work with Caller ID ........................................................... 46

Fax and Data Software Can’t Run at the Same Time ......................................... 46

Appendix A - Regulatory Compliance ....................................................................... 47

FCC Part 68 Telecom ........................................................................................ 47

Fax Branding Statement .................................................................................... 48

Canadian Limitations Notice............................................................................... 48

EMC, Safety, and R&TTE Directive Compliance ................................................ 49

International Modem Restrictions ....................................................................... 49

New Zealand Telecom Warning Notice .............................................................. 49

South African Notice .......................................................................................... 50

Appendix B - Technical Specifications ...................................................................... 51

Appendix C - Upgrading the Firmware...................................................................... 53

Introduction ........................................................................................................ 53

Upgrade Overview ............................................................................................. 57

Step 1 - Identify the Modem Firmware ............................................................... 57

Step 2 - Identify the Current Firmware Version .................................................. 58

Step 3 - Download the Upgrade File .................................................................. 58

Step 4 - Extract the Upgrade Files ..................................................................... 58

Step 5 - Clear Your Stored Paramenters............................................................ 59

Step 6 - Upgrade the Modem’s Firmware........................................................... 59

Step 7 - Restore Your Parameters ..................................................................... 59

Appendix D - Installing a Modem Under Linux .......................................................... 60

Introduction ........................................................................................................ 60

Standard Linux Serial Port Definitions ................................................................ 60

Installation .......................................................................................................... 60

Setup ................................................................................................................. 60

Appendix E - Pin Descriptions .................................................................................. 62

RS-232 Pin Descriptions .................................................................................... 62

RS-232 Cable Pinouts........................................................................................ 63

Leased Line Pinouts........................................................................................... 64

Index ........................................................................................................................ 65

5

Chapter 1 - Description and Features

Multi-Tech Systems, Inc. MT5600BA/BL Series User Guide (S000276E)

CC

C

hapterhapter

hapter

1 - Descr 1 - Descr

1 - Descr

iptipt

ipt

ii

i

oo

o

n andn and

n and

FF

F

ee

e

aa

a

tt

t

urur

ur

eses

es

Congratulations on your purchase of the MultiModemII modem. You have acquired one of the finest

intelligent data/fax modems available today from one of the world’s oldest modem manufacturers: Multi-

Tech Systems, Inc. This user guide will help you install, configure, test and use your modem.

PP

P

rr

r

oductoduct

oduct

Descr Descr

Descr

iptipt

ipt

ii

i

oo

o

nn

n

This modem supports two-wire and/or four-wire leased lines. The four-wire leased line includes the dial

backup and automatic leased line restoration features. Please note that, because leased-line operation

consists of two client modems connected to each other, the maximum leased line data rate is 33.6K bps.

The MT5600BA-V.92 modem supports both two-wire and four-wire leased lines.

The MT5600BA modem supports a two-wire leased line.

The MT5600BL modem supports a four-wire leased line.

The MultiModemII offers interactive automatic dialing. You can store four command lines or telephone

numbers of up to 30 characters each in the modem’s nonvolatile memory. The modem pulse- or tone-

dials, and recognizes dial tones and busy signals for reliable call-progress detection. It can also detect

AT&T calling card tones. It is FCC-registered for connection to telephone networks without notification to

the telephone company.

The MultiModemII front panel includes a liquid crystal display and four buttons, which together can be

used to either display the current connection status of the modem or to configure the modem. The

MultiModemII also can be configured through standard AT commands.

AA

A

boutbout

bout

AA

A

TT

T

C C

C

oo

o

mmmm

mm

andsands

ands

AT Commands for this product are published in a separate document and included on the

MT5600BA/BL System CD that accompanies your modem.

FF

F

ee

e

aa

a

tt

t

urur

ur

eses

es

General

•

Complies with major international standards to ensure compatibility with other modems.

•

Uses DTMF and tone detection to distinguish data and fax calls when used with software that

supports these features.

•

Supports serial port speeds to 230.4K bps with compatible serial ports

•

Supports Caller ID (North American versions only).

•

Displays status and configuration information on a front panel LCD.

Data

•

Supports automatic fallback to slower speeds in noisy line conditions, and fall-forward to faster

speeds as conditions improve.

•

Supports both synchronous and asynchronous data transfer.

•

Support two-wire leased line operation. Also supports four-wire leased line operation with dial

backup and leased line restoration.

•

Supports callback security and remote configuration.

•

Supports AS400 applications.

•

Automatically disables compression when transferring already-compressed files.

•

Can autodial, redial, pulse (rotary) and touch-tone dial.

•

Detects dial tones and busy signals for reliable call-progress detection.

•

Compatible with the standard AT command set used by most communication programs.

•

Supports Plug and Play (PnP).

•

Can be flash upgraded.

Fax

•

Supports V.17, Class 1, and Group 3 fax standards, (V.92 support Class 2 also) allowing it to

communicate with other fax modems as well as with fax machines.

6

Chapter 1 - Description and Features

Multi-Tech Systems, Inc. MT5600BA/BL Series User Guide (S000276E)

SS

S

afaf

af

etet

et

yy

y

WW

W

arar

ar

ningning

ning

ss

s

• Use this product only with UL- and CUL-listed computers.

• To reduce the risk of fire, use only 26 AWG or larger telephone wiring.

• Never install telephone wiring during a lightning storm.

• Never install a telephone jack in a wet location unless the jack is specifically designed for wet

locations.

• Never touch uninsulated telephone wires or terminals unless the telephone line has been

disconnected at the network interface.

• Use caution when installing or modifying telephone lines.

• Avoid using a telephone during an electrical storm; there is a risk of electrical shock from

lightning.

• Do not use a telephone in the vicinity of a gas leak.

7

Chapter 2 - Installation

Multi-Tech Systems, Inc. MT5600BA/BL Series User Guide (S000276E)

CC

C

hapterhapter

hapter

2 - Inst 2 - Inst

2 - Inst

alal

al

lala

la

tt

t

ii

i

oo

o

nn

n

Step 1 - CStep 1 - C

Step 1 - C

oo

o

nnenne

nne

ctct

ct

t t

t

he Modhe Mod

he Mod

em to em to

em to

YY

Y

ourour

our

Sy Sy

Sy

stemstem

stem

Turn off your computer. Placing the modem in a convenient location, connect it to your computer’s

serial port, to the telephone line, to your leased line, to AC power, and, optionally, to your telephone.

VOLUME

EIA RS232C

LEASEDLINE

POWER

PHONE

or

MultiModemII connections with V.92 transformer and V.90 transformer.

CC

C

oo

o

nnenne

nne

ctct

ct

t t

t

he Modhe Mod

he Mod

em to em to

em to

YY

Y

ourour

our

PC PC

PC

Plug one end of the serial cable into the RS-232 connector on the modem, and the other end into a

serial port connector on your computer, such as COM1 or COM2.

CC

C

oo

o

nnenne

nne

ctct

ct

t t

t

he Modhe Mod

he Mod

em to tem to t

em to t

he he

he

TT

T

elephoelepho

elepho

ne Line (ne Line (

ne Line (

DialupDialup

Dialup

CC

C

oo

o

nnenne

nne

ctct

ct

ii

i

oo

o

n)n)

n)

Plug one end of the modular phone cable into the modem’s LINE jack, and the other end into a public

switched telephone network (PSTN) wall jack.

Important: The LINE jack is not interchangeable with the PHONE jack. Do not plug the phone into

the LINE jack or the line cable into the PHONE jack.

Note: Regulatory agencies may impose certain restrictions on equipment connected to public

telephone systems.

CC

C

oo

o

nnenne

nne

ctct

ct

t t

t

heTheT

heT

ww

w

o-o-

o-

WW

W

irir

ir

e Le L

e L

ee

e

ased Lineased Line

ased Line

MT5600BA – Plug one end of a two-wire phone cable into the modem’s LINE jack; connect the other

end to a leased line wall jack or terminals.

MT5600BL – Plug one end of a two-wire phone cable into the modem’s LEASED jack; connect the

other end to a leased line wall jack or terminals.

8

Chapter 2 - Installation

Multi-Tech Systems, Inc. MT5600BA/BL Series User Guide (S000276E)

CC

C

oo

o

nnenne

nne

ctct

ct

t t

t

he Fhe F

he F

our-our-

our-

WW

W

irir

ir

e Le L

e L

ee

e

ased Lineased Line

ased Line

MT5600BL Only – Plug one end of a four-wire phone cable into the modem's LEASED jack; connect

the other end to a four-wire leased line wall jack or terminals.

Modems with a leased-line jack support the dial backup feature. For dial backup operation, plug one

end of your dialup modular phone cable into the modem’s

LINE jack and the other end into a PSTN

wall jack.Plug one end of a two-wire or four-wire phone cable into the modem’s LEASED jack, and

connect the other end to a leased-line wall jack or terminals.

Modems with a leased-line jack support the dial backup feature. For dial backup operation, plug one

end of your dialup modular phone cable into the modem’s LINE jack and the other end into a PSTN

wall jack.

CC

C

oo

o

nnenne

nne

ctct

ct

t t

t

he Phohe Pho

he Pho

ne to tne to t

ne to t

he Modhe Mod

he Mod

em (Optem (Opt

em (Opt

ii

i

oo

o

nal)nal)

nal)

For voice-only calls, plug a telephone into the modem’s PHONE jack.

CC

C

oo

o

nnenne

nne

ctct

ct

t t

t

he Modhe Mod

he Mod

em to tem to t

em to t

he he

he

AA

A

C PC P

C P

oo

o

ww

w

erer

er

O O

O

utut

ut

letlet

let

Plug the power transformer into an AC power outlet or power strip. Plug the power transformer’s

cable into the POWER jack on the modem.

Note: Use only the power transformer supplied with the modem. Use of any other transformer voids

the warranty and can damage the modem.

PP

P

oo

o

ww

w

er-er-

er-

On On

On

TT

T

estest

est

Test the modem by turning it on (a power switch is located on the front panel). When you apply

power, the modem performs a diagnostic self-test, indicated by the TM indicator lighting for a few

seconds, after which the LCD should light. If this does not happen, check that the power switch is

on, the power transformer is solidly connected, and the AC outlet is live. If these measures do not

work, see the “Troubleshooting” chapter.

9

Chapter 2 - Installation

Multi-Tech Systems, Inc. MT5600BA/BL Series User Guide (S000276E)

Step 2 - InstStep 2 - Inst

Step 2 - Inst

alal

al

l tl t

l t

he Modhe Mod

he Mod

em Drem Dr

em Dr

iviv

iv

erer

er

If you use Windows 98/Me/NT 4.0/2000/XP; you must install the modem driver. The drivers are installed

easily since Windows supports Plug-and-Play.

InstInst

Inst

alal

al

ling tling t

ling t

he Modhe Mod

he Mod

em Drem Dr

em Dr

iviv

iv

erer

er

f f

f

oo

o

rr

r

WW

W

indind

ind

oo

o

ww

w

s 98/Me/2000/s 98/Me/2000/

s 98/Me/2000/

XX

X

PP

P

1. Make sure your modem is connected properly, and then turn on your computer. Windows should

detect your new modem and open the Install New Modem wizard.

Note: If Windows cannot find a modem, your modem may be turned off, it may be plugged into

the wrong connector on your computer, or the serial cable may be faulty. See “None of the LEDs

Light When the Modem Is Turned On” and “The Modem Does Not Respond to Commands” in the

“Troubleshooting” chapter.

2. Insert the MultiModemII system CD into your CD-ROM drive, and then click OK.

3. Windows installs and configures the modem.

4. Click Finish to exit.

InstInst

Inst

alal

al

ling tling t

ling t

he Modhe Mod

he Mod

em Drem Dr

em Dr

iviv

iv

erer

er

f f

f

oo

o

rr

r

WW

W

indind

ind

oo

o

ww

w

s Ns N

s N

TT

T

1. Make sure your modem is connected properly, and then turn on your computer. Windows should

detect your new modem and open the Install New Modem wizard.

Note: If Windows cannot find a modem, your modem may be turned off, it may be plugged into

the wrong connector on your computer, or the serial cable may be faulty. See “None of the LEDs

Light When the Modem Is Turned On” and “The Modem Does Not Respond to Commands” in the

Troubleshooting chapter of the User Guide.

2. In the Install New Modem wizard, select Don’t detect my modem; I will select it from a list,

and then click Next. A dialog box with a list of manufacturers and a list of modem models

appears.

3. Insert the MultiModemII system CD into your CD-ROM drive, and then click Have Disk.

4. In the Install from Disk dialog box, select the drive that the CD is in, and then click OK.

5. A list of modems appears. Select your modem and click Next.

6. Select the port that the modem is connected to, and then click Next.

7. Windows installs and configures the modem.

8. Click Finish to exit.

RR

R

emoemo

emo

vv

v

ing an Old Moding an Old Mod

ing an Old Mod

em Drem Dr

em Dr

iviv

iv

erer

er

When your new modem replaces another modem, the old modem driver remains in Windows, and the

old modem driver is still selected in HyperTerminal and other Windows applications. Though you can

change the application connection descriptions one at a time, it is easier to force Windows applications to

use the new modem by removing the old modem driver from Windows.

1. Click the Start button, point to Settings, and click Control Panel.

2. Double-click the Modems icon to open the Modems Properties dialog box.

3. In the list box, select the old modem.

4. Click Remove, and then click Close.

5. The next time you dial a HyperTerminal connection, it will select your new modem and ask you to

confirm the selection.

10

Chapter 2 - Installation

Multi-Tech Systems, Inc. MT5600BA/BL Series User Guide (S000276E)

Step 3 - SetStep 3 - Set

Step 3 - Set

tt

t

ing ing

ing

YY

Y

ourour

our

C C

C

ountount

ount

rr

r

yy

y

o o

o

rr

r

R R

R

egeg

eg

ii

i

oo

o

n Cn C

n C

odod

od

ee

e

(MT5600B(MT5600B

(MT5600B

AA

A

––

–

VV

V

..

.

99

9

2 Only)2 Only)

2 Only)

The MT5600BA-V.92 modem is a global modem - it can be used all over the world.

However, countries or regions vary in their requirements for how a modem functions. Therefore, you

must configure yours to match the defaults of the country or region in which you are using it. Choose

from any of the three methods:

• Using the LCD Panel to Set Your Country or Region Code

• Using the Global Wizard to Set Your Country or Region Code

• Using AT Commands to Set Your Country or Region Code

Using tUsing t

Using t

he Lhe L

he L

CD PCD P

CD P

anel anel

anel

Region Profile

question mark represents the question Is this the region

not the one you want, arrow across until you see the code

Region Profile

Status

Basic Options

Advanced

Options

Remote Config

Diagnostics

Phone Number

Memory

Region Select

Caller ID

Region Setting

Options B5?

Region Profile

99?

Region Profile

01? 02?

Region Profile

03?

Region Profile

04?

1. Start at the Status LCD and use the down arrow to

move down the menu tree to the Region Select LCD.

4.When you reach the region code you want, press

Enter. After pressing Enter, you will see the message

Option Set

.

2. Use the right arrow to move from the Region Select

LCD, across the Region Setting Options LCD, to the

Current Setting LCD.

3. If the current setting shown is not the one for your

region, arrow across to the Region Profile LCD. The

you want? If B5 is the one you want, press Enter; if it s

you desire. See the list of Region Codes on the back of

this card.

Current Setting

5. After setting the region profile, you can re-power the

modem or use the arrows to move back and up the menu

tree to return to the Status LCD.

00?

Region Profile

09?

Region Profile

6C? 9F?

Using tUsing t

Using t

he Glohe Glo

he Glo

bal bal

bal

WW

W

iziz

iz

arar

ar

dd

d

The Global Wizard configuration utility is recommended for computers running in Windows. The

Wizard can configure your modem for a specific country or region with just a few mouse clicks.

1. Insert the MultiModemII CD into the CD-ROM drive. The Autorun dialog box appears.

2. Click Initial Setup and Country or Region Selection. The Global Wizard dialog box

appears. Click Next.

3. The Global Wizard searches for your modem and identifies it. Click Next after your modem is

identified.

4. Select the country or region in which the modem will be used. Click Next.

5. Review your choice. If it is correct, click Next to configure the modem.

6. When the Global Wizard announces that the parameters have been set, click Finish to exit.

11

Chapter 2 - Installation

Multi-Tech Systems, Inc. MT5600BA/BL Series User Guide (S000276E)

Using Using

Using

AA

A

TT

T

C C

C

oo

o

mmmm

mm

andsands

ands

If you are comfortable using AT commands, you can use them to configure your modem. You

must enter these commands in your communication program's terminal window. You can use a

communication program such as PhoneTools. See Step 4 below.

How to Change the Country/Region Code

1. View the list of available country/region codes to find your country/region code by

executing the command AT +GCI? <CR>

Note: A list of country/region codes is also available on the Multi-Tech Web site at:

http://www.multitech.com/PRODUCTS/Categories/Modems/global/

configuration.asp#chart

2. Set and save the code by executing the following command:

AT+GCI=

nn

<CR> (where

nn

is the country/region code).

3. OK displays.

4. The code then displays.

How to Verify the Code

1. Type AT+GCI?<CR>

or you can use this command:

ATI5<CR>

Example

1. Type AT+GCI=B5<CR> to set B5 as your country/region code.

2. Type AT+GCI?<CR> or ATI5<CR> to verify that B5 was set.

B5 indicates the configuration is set for any B5 country such as Canada and the United

States.

Step 4 - InstStep 4 - Inst

Step 4 - Inst

alal

al

l Phol Pho

l Pho

neTneT

neT

oooo

oo

ll

l

ss

s

Note: PhoneTools may or may not be included on the MultiModemII CD according to your company's

preference.

Data communications software gives you access to commands that govern how the modem operates;

that is, how the modem handles incoming and outgoing data streams, etc.

MultiTech includes a data communications software package (PhoneTools) on the product CD shipped

with your modem. In general, the modem will work with most data communications software packages.

1. Insert the MultiModemII CD into your CD-ROM drive. Allow Autorun to bring up the introductory

screen.

2. Click on the PhoneTools icon and choose the appropriate language.

3. Follow the PhoneTools installation wizard. No input is needed. You may choose to view the

“Readme” file and whether or not to run PhoneTools immediately.

Windows NT/2000/XP Note: During installation, an advisory screen may appear saying “FAX

capture driver installation” - this may cause a delay in the installation. This is normal. The

installation process has not failed or stalled. Simply wait a few moments until this screen

disappears.

4. After installation, you can launch PhoneTools either from a desktop icon or from the Start |

Programs menu. Typically, it’s not necessary to reboot before using PhoneTools.

Chapter 3 - Using the Front Panel

12

Multi-Tech Systems, Inc. MT5600BA/BL Series User Guide (S000276E)

CC

C

hapterhapter

hapter

3 - Using t 3 - Using t

3 - Using t

he Frhe Fr

he Fr

oo

o

ntnt

nt

P P

P

anelanel

anel

Like any modem, your Multi-Tech modem operates only under the control of a communication

program, such as the PhoneTools program included with the modem. It also operates under other

general-purpose data communication programs, such as Windows Terminal and HyperTerminal. For

information on how to use the modem with the communication program of your choice, please refer to the

program’s documentation.

ModMod

Mod

em Cem C

em C

oo

o

nfnf

nf

igig

ig

urur

ur

aa

a

tt

t

ii

i

oo

o

nn

n

Your modem normally is configured through Windows or through the communication program you are

using. The default settings work best for most purposes. See “Step 4: Install PhoneTools” in Chapter 2 for

help in setting up your communication program.

You also can configure your modem either through the front panel or by sending AT commands to the

modem. The AT commands can be found in the AT Reference Guide on the CD shipped with this

modem.

Figure 3-1. Front panel

LED IndicatorsLED Indicators

LED Indicators

The MT5600BA-V.92 has six LED indicators on the front panel that indicate status and activity:

Receive Data. The RD indicator flashes when the modem is receiving data.

Transmit Data. The TD indicator flashes when the modem is transmitting data.

Carrier Detect. The CD indicator lights when the modem detects a valid carrier signal from

another modem. It is on when the modem is communicating with the other modem, and off when

the link is broken.

Off-Hook. The OH indicator lights when the modem is off-hook, which occurs when the

modem is dialing, online, or answering a call. The LED flashes when the modem pulse-dials.

Terminal Ready. The TR indicator lights when a communication program is using the

modem. It means the modem is ready for an outgoing or incoming call. It goes off when the

communication program disconnects the serial port. When it goes off, a connected modem will

disconnect.

Test Mode. The TM indicator lights when the modem is in test mode.

Chapter 3 - Using the Front Panel

13

Multi-Tech Systems, Inc. MT5600BA/BL Series User Guide (S000276E)

Liquid CrLiquid Cr

Liquid Cr

yy

y

stst

st

al Dispal Disp

al Disp

lala

la

yy

y

(L (L

(L

CD)CD)

CD)

The MultiModemII’s backlit liquid crystal display (LCD) has two functions: to display the current status of

the modem and to display configuration menus, which are selected using the four pushbuttons on the

front panel.

OptOpt

Opt

ii

i

oo

o

n Selen Sele

n Sele

ctct

ct

ii

i

oo

o

nn

n

To select most configuration options, simply display the option in the LCD, and then press the Enter

button to select it. An OPTION SET message appears to confirm the selection. To exit the OPTION SET

message, press any button.

Some options, such as password options and phone number options, require you to enter a character

string. To select a character, press the

ÇÇ

Ç

ÅÅ

Å

and

ÈÈ

È buttons. To go to the next character position, press

the

ÆÆ

Æ button. To backspace, press the

ÆÆ

Æ button before selecting a character. To exit without saving,

press the

ÆÆ

Æ button several times. To save a character string, press the Enter button.

Menu StMenu St

Menu St

rr

r

uctuct

uct

urur

ur

ee

e

The LCD menus have a tree structure with multiple trunks, limbs, branches, and twigs. For a schematic

view, refer to the menu map on the next page.

Trunks are the major divisions of the menu tree. There are seven trunks: Status, Basic Options, Ad-

vanced Options, Remote Configuration, Diagnostics, Phone Number Memory, and Caller ID. Use the

ÇÇ

Ç

ÅÅ

Å

and

ÈÈ

È buttons to move between trunks.

Limbs are subdivisions of trunks. Use the

ÆÆ

Æ button to move from a trunk onto its first limb, and the

ÇÇ

Ç

ÅÅ

Å

and

ÈÈ

È buttons to move between limbs on the trunk.

Branches are subdivisions of limbs. Use the

ÆÆ

Æ button to move from a limb onto its first branch, and the

ÇÇ

Ç

ÅÅ

Å

and

ÈÈ

È buttons to move between branches on the limb.

Twigs are status screens and options that are accessible only from branches. Use the

ÆÆ

Æ button to move

from a branch to its first status screen or option; then press the

ÇÇ

Ç

ÅÅ

Å

and

ÈÈ

È buttons to move between

options, and press the Enter button to select an option.

Chapter 3 - Using the Front Panel

14

Multi-Tech Systems, Inc. MT5600BA/BL Series User Guide (S000276E)

Menu OMenu O

Menu O

vv

v

erer

er

vv

v

ii

i

ee

e

ww

w

Trunks Limbs Branches Twigs

Status =

, ,

,

Ent

,

Ent

,

Ent

,

Ent

,

Ent

,

Ent

,

Ent

,

Ent

,

Ent

,

Ent

,

Ent

,

Ent

,

, ,

,

, ,

,

Ent

,

Ent

,

Ent

,

Status =

Idle

Status =

Online

Basic Options

Manual Orig.?

Manual Answer?

Disconnect?49333,Async,Lapm

PSTN?

EC on? (&E2)

DTR normal?

(&D2)

CD forced on?

(&C0)

Enable RC?

Current Settings=

PSTN

Current Settings=

&E1

Current Settings=

&D2

Current Settings=

&C1 &C4

Current Settings=

Enabled

Line Type

Options

Error Correction

Options

DTR Options

Carrier Detect

Options

Enable / Disable

R,C,

Remote Config.

Password

Enter Password

A

Analog Loopback

Initiate AL?

Test in Progress

Initiate DL?

List Phone

Numbers

Enter Phone

Numbers

Enter Phone #0?

Enter Phone #1?

Phone #0?

Phone #1?

Terminate RDL?

Enable FCID?

(#CID1)

Region Setting

#CID0

Region Profile

B5

Region Profile

XX?

Current Setting =

02

Online Options

Dialing Options

Advanced Options

Remote

Config.

Caller I.D. Caller I.D.

Options

Phone Number

Mem. Ops.

Diagnostic

Options

Remote Config.

Password

Diagnostics

Diagnostic

Options

Phone Number

Memory

Phone Number

Mem. Ops.

Region Setting

Options

Region Select

,

( automatic selection )

Chapter 3 - Using the Front Panel

15

Multi-Tech Systems, Inc. MT5600BA/BL Series User Guide (S000276E)

StSt

St

aa

a

tt

t

us us

us

TrTr

Tr

unkunk

unk

The Status Trunk shows the current operating status of the modem. Limb changes are automatic, but

certain options can be accessed by pressing the

ÆÆ

Æ button. Note that when the modem is online, pressing

the

ÆÆ

Æ button shows the connect status, including the data speed, connection type, and compression

type.

Limbs Twigs

If Idle

If

Online

Chapter 3 - Using the Front Panel

16

Multi-Tech Systems, Inc. MT5600BA/BL Series User Guide (S000276E)

BB

B

asiasi

asi

c Optc Opt

c Opt

ii

i

oo

o

ns ns

ns

TrTr

Tr

unkunk

unk

Use the Basic Options Trunk to configure the modem’s basic operating conditions. When entering a

number, use the

ÇÇ

Ç

ÅÅ

Å

and

ÈÈ

È buttons to scroll through a list of digits and characters. To go to the next

position, press the

ÆÆ

Æ button. To back up or to exit without dialing, press the

ÆÆ

Æ button several times.

Limbs Branches Twigs

Continued on next page

Current Setting

Async AT

Async, SLAV?

Async, XCLK?

Chapter 3 - Using the Front Panel

17

Multi-Tech Systems, Inc. MT5600BA/BL Series User Guide (S000276E)

BB

B

asiasi

asi

c Optc Opt

c Opt

ii

i

oo

o

ns ns

ns

TrTr

Tr

unkunk

unk

,,

,

c c

c

oo

o

ntnt

nt

inuedinued

inued

Continued from previous page

Limbs Branches Twigs

Chapter 3 - Using the Front Panel

18

Multi-Tech Systems, Inc. MT5600BA/BL Series User Guide (S000276E)

AA

A

dvdv

dv

ancanc

anc

ed Opted Opt

ed Opt

ii

i

oo

o

ns ns

ns

TrTr

Tr

unkunk

unk

Use the Advanced Options Trunk to configure RS-232, dial backup, and callback security options. When

entering a number or password, use the

ÇÇ

Ç

ÅÅ

Å

and

ÈÈ

È buttons to select a character or digit. To go to the

next position, press the

ÆÆ

Æ button. To backspace or to exit, press the

ÆÆ

Æ button several times.

Limbs Branches Twigs

Continued on next page

Chapter 3 - Using the Front Panel

19

Multi-Tech Systems, Inc. MT5600BA/BL Series User Guide (S000276E)

AA

A

dvdv

dv

ancanc

anc

ed Opted Opt

ed Opt

ii

i

oo

o

ns ns

ns

TrTr

Tr

unkunk

unk

,,

,

c c

c

oo

o

ntnt

nt

inuedinued

inued

Continued from previous page

Limbs Branches Twigs

Chapter 3 - Using the Front Panel

20

Multi-Tech Systems, Inc. MT5600BA/BL Series User Guide (S000276E)

RR

R

emote Cemote C

emote C

oo

o

nfnf

nf

igig

ig

urur

ur

aa

a

tt

t

ii

i

oo

o

n Optn Opt

n Opt

ii

i

oo

o

ns ns

ns

TrTr

Tr

unkunk

unk

Use the Remote Configuration Options Trunk to enable or disable remote configuration on the modem,

and to change the password. When entering the password, use the

ÇÇ

Ç

ÅÅ

Å

and

ÈÈ

È buttons to scroll through

the alphabet. To go to the next character position, press the

ÆÆ

Æ button. To backspace or to exit, press the

ÆÆ

Æ button several times.

Limb Branches Twigs

DiagDiag

Diag

nono

no

stst

st

ii

i

c Optc Opt

c Opt

ii

i

oo

o

ns ns

ns

TrTr

Tr

unkunk

unk

Use the Diagnostic Options Trunk to run loopback tests on the modem. When a test is in progress, the

TM indicator lights.

Limb Branches Twigs

Note: Digital Loopback and Remote Digital Loopback tests must be performed using AT Commands. The

LCD option to run these tests has been temporarily removed.

La pagina sta caricando ...

Multitech MT5600BA–V.92 Manuale utente

Multitech MT5600BA–V.92 Manuale utente

in altre lingue

Altri documenti