Nikon Forestry Pro Manuale utente

Forestry Pro

Laser Rangefinder / Laser-Entfernungsmesser / Télémètre laser /

Telémetro láser / Telemetro laser / Лазерный дальномер /

Laseravstandsmåler / Laseravståndsmätare / Laser-etäisyysmittari

/Laserafstandsmeter / Laserafstandsmåler / Telemetru cu laser /

Dalmierz laserowy / Lézeres távmérő / Laserový dálkoměr

En De Fr Es

SeRu NoIt

Pl Hu Cz

Nl DkFi Ro

Instruction manual / Bedienungsanleitung/ Manuel d’utilisation /

Manual de instrucciones / Manuale di istruzioni / Руководство по

продукции / Instruksjonsmanual / Bruksanvisning / Käyttöohje /

Gebruiksaanwijzing / Brugsvejledning / Manual de instrucţiuni /

Instrukcją obsługi / Kezelési útmutató / Návod k použití

22

English ......................... p. 4-33

Deutsch...................... s. 34-63

Français .....................p. 64-93

Español ....................p. 94-123

Italiano ..................p. 124-153

Русский .............cтр. 154-183

Norsk ..................... s. 184-213

Svenska ................. s. 214-243

Suomi ..................... s. 244-273

Nederlands ............p. 274-303

Dansk ..................... s. 304-333

Română .................p. 334-363

Polski ..................... s. 364-393

Magyar..................394-423. o.

Česky...................... s. 424-453

3

4

Ru

Se

Nl

Dk

Pl

Hu

Cz

Fi

No

En

De

Fr

Es

It

Ro

CONTENTS

Cautions before use ....................................................... 5-7

Key features ....................................................................... 8-9

Nomenclature/Composition ......................................... 10

Changing batteries ........................................................... 11

Internal display ............................................................. 12-13

Operational Summary ............................................... 14-16

Specifications ................................................................ 17-18

External display ............................................................ 19-21

Operation and internal display ............................... 22-28

Others ..................................................................................... 29

Troubleshooting/Repair ............................................ 30-31

How to use the Rangefinder case ................................. 32

English

5

Ru

Se

Nl

Dk

Pl

Hu

Cz

Fi

No

En

De

Fr

Es

It

Ro

Cautions before use

Thank you for purchasing the Nikon Laser Forestry Pro.

This high-spec laser rangefinder features a new angle measurement function in addition to the

existing linear distance measurement function for enhanced enjoyment of sports and other outdoor

applications. (The Nikon Laser Forestry Pro is also able to measure the horizontal distance to a target

and its height.)

Please observe the following guidelines strictly so you can use the equipment properly and

avoid potentially hazardous problems. Before using this product, read thoroughly the “SAFETY

PRECAUTIONS” and instructions on correct usage accompanying the product.

Use of controls or adjustments or performance of procedures other than those specified herein

may result in hazardous radiation exposure.

Keep this manual within reach for easy reference.

• Specifications and design are subject to change without notice.

• No reproduction in any form of this manual, in whole or in part (except for brief quotation in critical

articles or reviews), may be made without written authorization from NIKON VISION CO., LTD.

6

Ru

Se

Nl

Dk

Pl

Hu

Cz

Fi

No

En

De

Fr

Es

It

Ro

Cautions before use

Please observe the following

guidelines strictly so you can use

the equipment properly and avoid

potentially hazardous problems.

Before using this product, read

thoroughly the “SAFETY AND

OPERATION PRECAUTIONS” and

instructions on correct usage

accompanying the product. Keep

this manual within reach for easy

reference.

WARNING

This indication alerts you to the fact

that any improper use ignoring the

contents described herein can result in

potential death or serious injury.

CAUTION

This indication alerts you to the fact

that any improper use ignoring the

contents described herein can result in

potential injury or material loss.

SAFETY AND OPERATION

PRECAUTIONS

Warning

• Never look directly at the laser beam

or directly at the sun when using the

Nikon Laser Forestry Pro.

• Do not depress the POWER button

while looking into the optics from the

objective side.

• Do not aim at the eye.

• Do not operate the unit with other

additional optical elements, such as

lenses or binoculars. Using an optical

instrument together with the Nikon

Laser Forestry Pro increases the danger

of damaging the eyes.

• Do not disassemble the Nikon Laser

Forestry Pro. The emitting laser may

be harmful to your health. A product

that has been disassembled is not

guaranteed by the manufacturer.

• When the Nikon Laser Forestry Pro’s

body cover is damaged, or if it emits

a strange sound due to dropping or

for some other cause, immediately

remove the battery and stop using.

Cautions

• When not using the Nikon Laser

Forestry Pro, do not push the POWER

button.

• Do not leave the Nikon Laser Forestry

Pro within the reach of small children.

• Rain, water, sand and mud should be

removed from the rangefinder body

surface as soon as possible, using a

soft, clean, dry cloth.

• Although the Nikon Laser Forestry Pro

is waterproof, it is not designed for use

underwater.

• Do not swing the Nikon Laser Forestry

Pro by its strap. It may hit someone

and cause injury.

• Do not leave the Nikon Laser Forestry

Pro in an unstable place, as it may

fall and cause injury, or damage the

equipment.

• Do not look through the Nikon Laser

Forestry Pro while walking. You may

walk into something and get hurt.

• Do not leave the Nikon

Laser Forestry

Pro

in a car on a hot or sunny day, or

near heat-generating equipment. This

may damage or negatively affect it.

• Do not leave the Nikon

Laser Forestry

Pro

in direct sunlight. Ultraviolet rays

and excessive heat may negatively

affect or even damage the unit.

• When the Nikon Laser Forestry Pro

is exposed to sudden changes in

temperature, water condensation may

occur on lens surfaces. Do not use the

product until the condensation has

evaporated.

• Do not use alcohol for cleaning the

main body.

• Do not leave the polyethylene bag

used for packaging within the reach of

small children.

• Be careful that small children do not

inadvertently swallow the eyecup.

If it does happen, consult a doctor

7

Ru

Se

Nl

Dk

Pl

Hu

Cz

Fi

No

En

De

Fr

Es

It

Ro

should not be used again for the lens

surface.

Main body

• Clean the body surface with a soft,

clean cloth and a dry cloth. Do not

use benzene, thinner, or other organic

agents because they may cause

discolouration or rubber

degeneration.

Storage

• Water condensation or mold may

occur on the lens surface because of

high humidity. Therefore, store the

Nikon

Laser Forestry Pro

in a cool, dry

place.

After use on a rainy day or at night,

thoroughly dry it at room

temperature, then store in a cool, dry

place.

NOTES ON LITHIUM BATTERY

If handled incorrectly, batteries may

rupture and leak, corroding equipment

and staining clothing. Be sure to

observe the following:

• Install batteries with the + and – poles

positioned correctly.

• Batteries should be removed when

exhausted or during extended

periods of non-use.

• Always use the same type of battery.

immediately.

• If you use the rubber eyecup for a

long period of time, you may suffer

skin inflammation. If you develop

any symptoms, consult a doctor

immediately.

• When carrying the Nikon Laser

Forestry Pro, store it in the soft case.

• If your Nikon Laser Forestry Pro

should fail to operate correctly,

discontinue use immediately and

consult the Troubleshooting Table.

If you are unable to fix the problem,

contact your local dealer for

instructions on where to send it for

repair.

CARE AND MAINTENANCE

Lenses

• When removing dust on the lens

surface, use a soft oil-free brush.

• When removing stains or smudges

like fingerprints from the lens

surface, wipe the lenses very gently

with a soft clean cotton cloth or

quality oil-free lens tissue.

Use a small quantity of pure alcohol

(not denatured) to wipe stubborn

smudges. Do not use velvet cloth or

ordinary tissue, as it may scratch the

lens surface. Once the cloth has

been used for cleaning the body, it

• If battery fluid contacts eyes or skin,

rinse well with water. If swallowed,

consult a doctor immediately.

• Do not short-circuit battery chamber

terminals.

• Do not carry batteries together with

keys or coins in a pocket or bag. This

may overheat and short-circuit

batteries.

• Do not put batteries in fire or water.

Never disassemble batteries.

• Do not charge batteries.

• Do not subject stored batteries to

extremes in temperature.

• Do not subject batteries to strong

vibrations or shock.

8

Ru

Se

Nl

Dk

Pl

Hu

Cz

Fi

No

En

De

Fr

Es

It

Ro

Key Features

• Linear distance measurement range: 10-500 meters/11-550

yards/33-999 feet.

• Angle measurement range: ±89°

• Distance measurement display step:

[Internal Display]:

(Linear Distance)

0.5 meter/yard, 1 foot

(measurement distance is less than 100 meters/yards

/feet)

1.0 meter/yard, 1 foot

(measurement distance is 100 meters/yards/feet

or further)

(Horizontal Distance/Height)

0.2 meter/yard, 0.5 foot

(measurement distance is less than 100 meters/yards

/feet)

1.0 meter/yard, 1 foot

(measurement distance is 100 meters/yards/feet

or further)

(Angle)

0.1° (-10° — 10°)

1.0° ( ≦ -10°, 10° ≦ )

[External Display]:

(Linear distance) 0.5 meter/yard, 1 foot

(Horizontal Distance/Height) 0.2 meter/yard, 0.5 foot

(Angle) 0.1°

• Easy-to-aim 6x optical observation system

• Quantifies the horizontal distance to the target and its height in

relation to the rangefinder's level by measuring linear distance

and angle.

• Measure the vertical separation (height between two points) -

vertical separation mode and 3-point measurement mode are

available

• The results are displayed on both an internal and an

external LCD panel. The external LCD panel shows all results

simultaneously.

• Target Priority Switch System allows you to easily match the

measuring situation.

• Waterproof design (NOT designed for underwater usage)

• Invisible/Eyesafe EN/IEC Class 1M Laser

• 30-second results display

• Compact, lightweight, ergonomic design

• Automatic shut-off (after approx. 30 sec. unattended)

• Default to “Last Use” settings

• Approx. 20-second continuous measuring function

The Nikon Laser Forestry Pro emits invisible, eyesafe, infrared

energy pulses that reflect off the selected target back to its

optical receiver. Sophisticated precision charge circuitry is used

to instantaneously calculate distances, by measuring the time it

takes for each pulse to travel from the rangefinder to the target

and back. Laser reflectivity and measurement results may vary

according to climatic and environmental conditions, the colour,

surface finish, size, shape and other characteristics of the target.

9

Ru

Se

Nl

Dk

Pl

Hu

Cz

Fi

No

En

De

Fr

Es

It

Ro

The following factors ensure better range and accuracy:

• Night time use

• Cloudy weather

• Bright-coloured targets

• Targets with highly reflective surfaces

• Targets with shiny exteriors

• Large-size targets

• Shooting targets facing at 90 degrees

Measurement may result in inaccuracy or failure in the following cases:

• Slender or small target

• Target has diffusing reflective surface

• Target does not reflect the laser beam to the rangefinder (glass, a mirror, etc.)

• Black target

• Target has varing depths

• In snow, rain or fog

• Target measured through glass

• Reflective surface measured from diagonal direction

• Moving target

• Obstacle moving in front of the target

• When targeting the surface of water

10

Ru

Se

Nl

Dk

Pl

Hu

Cz

Fi

No

En

De

Fr

Es

It

Ro

Nomenclature/Composition

1Monocular objective lens/

Laser emission aperture

2Laser detector aperture

3External LCD

4MODE button

5POWER button

66x monocular eyepiece

7Eyecup/dioptre adjustment ring

8Dioptre index

9Strap eyelet

!pBattery chamber cover

!qBattery chamber cover “Open/Close”

indication

!wProduct number/explanatory label

!e Laser warning label

Body .............................................. x1

Soft case (CCN) ...........................x1

Neckstrap ....................................x1

Lithium battery (CR2) ..............x1

Composition

8

6

!w

!q

9

!p

3

7

!e

1

2

4

5

11

Ru

Se

Nl

Dk

Pl

Hu

Cz

Fi

No

En

De

Fr

Es

It

Ro

Changing Batteries

•

Type of battery: 3V CR2 lithium battery

•

Battery condition indicators

: Battery has enough power for use.

: Battery is getting low.

flashing: Battery is low and battery should be replaced.

disappears: Battery is exhausted and should be replaced.

flashing in the LCD indicates that the battery should be replaced.

1 Open the battery chamber cover

Using the ball of the thumb or a coin in the recessed part of the battery chamber cover, rotate the cover following the Open/

Close arrow indicator. It may not open easily due to its rubber packing for water resistance.

2 Replace the old battery with a new one

Install new battery with the [+] and [-] correctly positioned following the “Battery installation” indication seal in the battery

chamber. (Insert battery positioning the [+] pole towards the inside of the chamber.) [The Laser Forestry Pro will not operate

if the battery is installed incorrectly.]

3 Close the battery chamber cover

Align the Open/Close indicator with the white dot and insert the battery chamber cover. Using the ball of the thumb or a

coin, turn the cover in the opposite direction to the arrow indicator. It may not close easily due to the rubber packing for

water resistance, but continue to turn it all the way until it stops. Confirm that the cover is securely closed.

•

Battery life

Continuous operation: Approx. 13,000 times (at 20°C)

Target focusing, measurement, and automatic power off are included in a single cycle. This figure may differ according to

temperature, and other factors such as target shape, colour, etc.

* The Nikon Laser Forestry Pro come with a 3V CR2 lithium battery. However, due to natural electric discharge, the life of the battery will likely be

shorter than that noted above.

* Replace battery if the Nikon Laser Forestry Pro is ever submerged in water or if water enters in the battery chamber.

12

Ru

Se

Nl

Dk

Pl

Hu

Cz

Fi

No

En

De

Fr

Es

It

Ro

Internal display

1. 『』- Target aiming/Laser irradiate system

『

』- Aim at the target. Position the target at the center of the reticle.

『

』

- Appears while the laser is being used for a measurement. (Remains present during single

measurement. Blinks during continuous measurements.)

Warning: Do not look into the objective lenses when this mark is shown.

2．『

』- Distance/measurement status display

Digitally indicates measured distance in meters/yards/feet and angles in degrees. Also indicates

measuring status such as “Measurement in progress”, “Measurement unsuccessful” or “Unable to

measure.”

(Distance)

Display of results: ( ≧ 100m/yards/feet) e.g. 234 meters = 『

』

Display of results: ( ＜ 100m/yards/feet) e.g. 76.5 yards = 『

』

Display of results: ( ＜ 100m/yards/feet) e.g. 82 feet =

『』

(Angle)

Display of results: ( ≦ -10˚and ≧ 10˚) e.g. 36˚ =『』

e.g. -29˚ =『

』

Display of results: (-10˚＜ and ＜ 10˚) e.g. 3.5˚ =『

』

e.g. -7.0˚=『

』

『

』- Now measuring

『

』- Failure to measure or unable to measure distance

3. 『

』

Display Units

『

』Indicates distance being measured in meters.

『

』Indicates distance being measured in yards.

[No unit displayed]　Indicates distance is measured in feet.

4. 『』- Indicates battery condition. (See "Changing Batteries")

13

Ru

Se

Nl

Dk

Pl

Hu

Cz

Fi

No

En

De

Fr

Es

It

Ro

5. 『』Display Modes

(See “External display, and Operation and Internal display” for operations and display examples.)

Linear distance mode

　『

』 Calculates linear distance to your target and displays the results.

Horizontal distance mode

　『

』 Calculates horizontal distance to your target by measuring the linear distance and angle, and displays the results.

Height mode

　『

』 Measures your target's height from the horizontal level, and displays the results.

Vertical separation (height between two points) mode

　『

』 Uses the linear distance and angle data of two points to calculate and display the vertical separation (height

between the two points.)

Three-point measurement (height between two points) mode

『

』

Use the horizontal distance data to the target (1st point) and angle data of two points (2nd and 3rd points)

to calculate and display the vertical separation (height between 2nd and 3rd points).

Angle mode

　『

』 Measures the angle of your target from the horizontal level and displays the results.

6. 『

』 Target Priority mode

First Target Priority mode

　『

』 Indicates when First Target Priority mode is set.

Distant Target Priority mode

　『

』 Indicates when Distant Target Priority mode is set.

Note: When Angle measuring mode is set (during [Ang] symbol display), Target Priority mode is not displayed and illuminated [1st]

or [Dst] symbols turn off.

Although the LCD was produced using the most advanced technology, it is impossible to eliminate dust completely. When using this

product, the LCD is magnified by high magnification of the eyepiece lens and dust may appear as a defect. It will not, however, affect

measurement accuracy.

14

Ru

Se

Nl

Dk

Pl

Hu

Cz

Fi

No

En

De

Fr

Es

It

Ro

Operational Summary

Caution—use of controls or adjustments or

performance of procedures other than those

specified herein may result in hazardous radiation

exposure

1. Install a battery in the battery chamber. (See "Changing

Batteries")

2. Rubber eyepiece cup

Eyeglass wearer: Collapse the eyepiece cups.

Non-eyeglass wearer: Do not collapse the eyepiece cups.

3. Diopter adjustment

Adjust diopter to obtain a clear image in the LCD.

First, rotate the diopter adjustment ring counterclockwise

until it comes to a complete stop. Next, turn on the power

to activate the LCD when you look through the Nikon Laser

Forestry Pro. Rotate the diopter adjustment ring clockwise

until the display comes into focus.

If the diopter is not adjusted to correspond to your

eyesight, you may not be able to clearly focus your subject.

4. Measuring

Note: See the chapter "External and Internal display" for external

LCD panel.

Note: Depressing and holding down the POWER button causes

all symbols to be displayed in the internal LCD panel. After

you remove your finger from the POWER button, the last-

used setting is displayed. (If you briefly press the POWER

button then remove your finger, the LCD panel may

display the last-used setting without displaying all of the

symbols. This is not a malfunction or other problem.)

Before measuring, be sure to confirm settings, such as unit,

measurement/display mode and priority mode.

◎: See the relevant mode section in this manual for setting.

POWER

LCD is illuminated

Set your desired modes

◎

Align the reticle

with the target

POWER

appears

Results are converted

to the mode set and

displayed.

MODE

Indication

remains

illuminated for

30 sec.

30 seconds pass without operation ＊

Power off: LCD indications disappear

Measure again

Fail to measure

Cannot measure

Successfully

measured

For continuous distance

and angle measurement

(up to 20 seconds), keep

button depressed.

※

or

☆

15

Ru

Se

Nl

Dk

Pl

Hu

Cz

Fi

No

En

De

Fr

Es

It

Ro

☆【Continuous measurement mode】

Keeping the POWER button depressed allows you to

perform continuous measurement for 20 seconds.

Blinks while performing measurements.

When measuring a pin at a golf course, for example, use First

Target Priority and Continuous measurement mode for easy

measurement. With no objects between you and the pin, the

smallest number is the distance to your targeted pin.

※ See the the chapter "External and Internal display" for details

regarding the operations and results display of the various

modes.“

＊ Power turns off 30 seconds after the last operation.

5. Selecting display unit (Factory default setting is feet.)

1. Confirm the LCD panel is on.

2. Press and hold the

button for approx. two seconds.

3. When display unit has switched, release the

button.

4. Repeat steps 2 and 3 until your desired mode is displayed.

5. When you have completed setting, results will be converted

and displayed in the your selected measurement unit.

By pressing the MODE button, modes will change in the order

indicated above.

1. Confirm the LCD panel is on.

2. Press

button within 0.5 seconds.

3. Release

button to switch the mode.

4. Repeat steps 2 and 3 until your desire mode is displayed.

5. Switching the mode after measurement converts the

results to the new mode.

6. After the mode is set, measurements are performed in the

new mode.

6. Switching measurement/display modes (Factory default

setting is linear distance measurement mode)

Meter [ ]

Yard

[ ]

Feet

[



]

Linear Distance [ ]

Horizontal Distance [ ]

Angle [ ]

Height [ ]

Vertical Separation

(height between 2

points )

[ ]

Three-point measurement

[ ]

16

Ru

Se

Nl

Dk

Pl

Hu

Cz

Fi

No

En

De

Fr

Es

It

Ro

7. Switching Target priority modes (Factory default setting is

Distant Target Priority mode.)

1. LCD panel should be on.

2. Press and hold

button, then depress and hold

button within 0.5 second.

Note）If the

button is not pressed within 0.5

second, the display unit (m/yd/ft) will be switched.

3. Continue to press and hold both buttons (more than 2

seconds) until First Target Priority mode and Distant Target

Priority mode are switched.

Note: If buttons are not pressed in the correct order,

switching will not take place.

Note: If switching fails to take place, repeat 2.

4. Release buttons.

Note: Because Target Priority mode is not displayed

while Angle mode is set, switching is made but

visual confirmation is impossible. Switch to another

measuring mode for confirmation.

[Deciding which Target Priority to use]

When obtaining different results from a single measuring

operation, the Nikon Laser Forestry Pro will display the distance

to the farthest target on the LCD panel when using Distant Target

Priority mode, while First Target Priority mode will show the range

to the nearest target.

ex.) When measuring a tree standing in front of a house;

"115m" (distance to the tree) will be displayed in First Target

Priority mode, and "128m" (distance to the house) in Distant

Target Priority mode. First Target Priority mode, for example, has

applications for golf, while Distant Target Priority is useful when

hunting in heavily wooded areas.

8. Low battery indication

Flashing

indicates that the battery power is low and

battery should be replaced. (See "Changing Battery")

First Target Priority

[

]

Distant Target Priority

[

]

Tree Fence House

Distance to Target

115m 123m 128m

Operational Summary

17

Ru

Se

Nl

Dk

Pl

Hu

Cz

Fi

No

En

De

Fr

Es

It

Ro

Specifications

Measuring system

Measuring mode display Linear distance : Act

Horizontal distance : Hor

Height : Hgt

Angle : Ang

Vertical separation (height between two points ): Hgt + Hgt2

Three-point measurement : Hor + Hgt + Hgt2

Measuring distance/ angle range

Distance: 10-500 meters/11-550 yards/33-999 feet

(999 feet: 304.5 meters/333 yards)

Angle: ± 89°

Distance-

angle

Display

steps

Act

(Linear distance)

0.5m/yd., 1.0 ft. ( ＜ 100m/yd./ft.)

1.0m/yd., 1.0 ft. ( ≧ 100m/yd./ft.)

Hor

(Horizontal distance)

0.2m/yd., 0.5 ft. ( ＜ 100m/yd./ft.)

1.0m/yd., 1.0 ft. ( ≧ 100m/yd./ft.)

Hgt

(Height)

0.2m/yd., 0.5 ft. ( ＜ 100m/yd./ft.)

1.0m/yd., 1.0 ft. ( ≧ 100m/yd./ft.)

Ang (Angle) 0.1° ( ＜ 10°), 1.0°( ≧ 10°)

Linear distance

Horizontal dist.

Height

Angle

0.5m/yd., 1.0 ft.

0.2m/yd., 0.5 ft.

0.1°

System First Target Priority/Distant Target Priority switching system

Optical system

Type Roof-prism monocular

Magnification (x) 6

Effective diameter of objective lens

(mm)

ø21

Angular field of view (real) (˚) 6.0

Eye relief (mm) 18.2

Exit pupil (mm) ø3.5

Dioptre adjustment ±4m

-1

Internal

External

18

Ru

Se

Nl

Dk

Pl

Hu

Cz

Fi

No

En

De

Fr

Es

It

Ro

* Waterproof models

The Nikon Laser Forestry Pro is waterproof, and will suffer no damage to the optical system if submerged or dropped in water to a

maximum depth of 1 meter for up to 10 minutes.

The Nikon Laser Forestry Pro offers the following advantages:

• Can be used in conditions of high humidity, dust and rain without risk of damage.

• Nitrogen-filled design makes it resistant to condensation and mold.

Observe the following when using the Nikon Laser Forestry Pro.

• The unit should not be operated nor held in running water.

• Any moisture should be wiped off before adjusting movable parts (eyepiece, etc.) of the Nikon Laser Forestry Pro to prevent

damage and for safety reasons.

To keep your Nikon Laser Forestry Pro in excellent condition, Nikon Vision recommends regular servicing by an authorized dealer.

** The battery chamber is water resistant, not waterproof. Water may enter the device if the Nikon Laser Forestry Pro is submerged in

water. If water enters the battery chamber, wipe out any moisture and allow time for the chamber to dry.

Specifications

Others

Operating temperature (˚C) -10 — +50

Power source CR2 lithium battery x 1 (DC 3V)

Auto power shutoff function equipped (after approx. 30 seconds)

Dimensions (L x H x W) (mm) 130x69x45

Weight (g) Approx. 210 (without battery)

Structure Body: Waterproof

(maximum depth of 1 meter for up to 10 minutes)*

（Battery chamber: Water resistant**）

Laser classication IEC60825-1: Class 1M/Laser Product

FDA/21 CFR Part 1040.10:Class I Laser Product

EMC FCC Part15 SubPartB class B, EU:EMC directive, AS/NZS, VCCI classB, CU TR 020

Environment RoHS, WEEE

Laser

Wavelength (nm) 870

Pulse duration (ns) 14

Output (W) 15

Beam divergence (mrad) Vertical: 2.5, Horizontal: 0.025

Operating humidity (%RH) 80 (without dew condensation)

19

Ru

Se

Nl

Dk

Pl

Hu

Cz

Fi

No

En

De

Fr

Es

It

Ro

External display

[Power On]

After the power is turned on, the

internal and external LCDs are

illuminated until either the POWER or

MODE button is pressed.

[Power off notice]

If 30 seconds pass without

operation, the power turns off.

Approx. one second before power

turns off, this screen is displayed.

[Results]

1 Point Measurement

After measurement, all data “linear

distance, horizontal distance, height

and angle” are displayed. Units can be

shown in meters, yards or feet. Angles

are indicated by °(degree).

[ m ] : meter

[ YD ] : yards

[ ft ] : feet

Linear distance Horizontal distance

Height Angle Unit

[While measuring]

When the target is upward

When the target is downward

[Measurement unsuccessful or unable to measure]

When the target is upward

When the target is downward

With negative values,

the “– (minus)” symbol is not shown.

[Measurement complete]

When the target is upward

When the target is downward

20

Ru

Se

Nl

Dk

Pl

Hu

Cz

Fi

No

En

De

Fr

Es

It

Ro

External display

Vertical separation (height between two points) mode

[Results]

After measuring two points, "Linear

distance to two points" and "Vertical

separation (height) and angle

between two points" are displayed.

Units can be shown in meters, yards

or feet. Angles are indicated by

°(degree).

Linear distance (1st point)

Linear distance (2nd point)

Vertical separation (height between two points)

Angle of two points

Unit

[Measuring 1st point]

[Failed to measure 1st point]

Angle measurements never fail.

[Results of 1st point]

[Measuring 2nd point]

[Failure to measure 2nd point]

Although the point is located

downward, display shows the

upward position.

Angle measurements never fail.

[Display of results for vertical separation (height between two

points) and 2nd point]

Vertical separation

(height between two points)

After displaying vertical

separation (height between

two points), pressing MODE

button displays the result of

the 2nd point.

La pagina sta caricando ...

Nikon Forestry Pro Manuale utente

Nikon Forestry Pro Manuale utente

in altre lingue

Documenti correlati

Altri documenti