Kawai KDP90 Manuale del proprietario

ES520

Owner’s Manual

Important Information

Preparation

Basic Operation

Adjustments & Settings

Appendix

3

Important Information

Important Safety Instructions

denotes that care should be taken.

The example instructs the user to take care not to allow ngers to be trapped.

denotes a prohibited operation.

The example instructs that disassembly of the product is prohibited.

denotes an operation that should be carried out.

The example instructs the user to remove the power cord plug from the AC outlet.

Examples of Picture Symbols

Read all the instructions before using the product.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

AVIS : RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR.

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lighting ash with arrowhead symbol, within

an equilateral triangle, is intended to alert the user

to the presence of uninsulated "dangerous

voltage" within the product's enclosure that may

be of sucient magnitude to constitute a risk of

electric shock to persons.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and maintenance

(servicing) instructions in the leterature

accompanying the product.

WARNING

TO REDUCE THE RISK OF FIRE

OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS PRODUCT TO

RAIN OR MOISTURE.

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS

SAVE THESE INSTRUCTIONS

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in

accordance with the manufacturer's instructions.

8) Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

ampliers) that produce heat.

9) Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding

type plug has two blades and a third grounding

prong. The wide blade or the third prongs are

provided for your safety. If the provided plug does

not t into your outlet, consult an electrician for

replacement of the obsolete outlet.

1 0) Protect the power cord from being walked on or

pinched particularly at plugs, convenience

receptacles, and the point where they exit from the

apparatus.

11) Only use attachments/accessories specied by the

manufacturer.

1 2) Use only with the cart, stand, tripod, bracket, or table

specied by the manufacturer, or

sold with the apparatus. When a cart is used,

use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

1 3) Unplug this apparatus during lightning storms or

when unused for long periods of time.

1 4) Refer all servicing to qualied service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or object

have fallen into the apparatus, the apparatus has

been exposed to rain or moisture, does not operate

normally, or has been dropped.

4

Important Information

WARNING

Indicates a potential hazard that could result in death or

serious injury if the product is handled incorrectly.

WARNING - When using electric products, basic precautions should always be followed,including the following:

This product shall be near the AC outlet and the power cord plug in a position so that it can readily be

disconnected in an emergency because electricity is always charging while the plug is in the AC outlet even in a

power switch o condition.

This product may be equipped with a polarized line plug (one blade wider

than the other). This is a safety feature.

If you are unable to insert the plug into the outlet, contact an electrician to

replace your obsolete outlet.

Do not defeat the safety purpose of the plug.

● Failure to do so may cause re in case of

lightning.

● Failure to do so may over-heat the product,

resulting in re.

The product is not completely disconnected from the

power supply even when the power switch is turned

o. If the product will not be used for a long time,

unplug the AC power cord from the AC outlet.

When disconnecting the AC power cord's

plug, always hold the plug

and pull it to remove it.

● Pulling the AC power cord itself may damage

the cord, causing a re, electric shock or

short-circuit.

Do not disassemble, repair or modify

the product.

Doing so may result in product breakdown, electric

shock or short-circuit.

When using the headphones, do not

listen for long periods of

time at high volume levels.

Doing so may result in hearing problems.

Do not insert or disconnect the power

cord plug with wet hands.

Doing so may cause electric shock.

The product should be connected to

an AC outlet of the specied voltage.

● If you are going to use an AC power cord,

make sure that its has the correct plug shape

and conforms to the specied power voltage.

● Failure to do so may result in re.

120V 240V230V

Doing so may cause the product to fall over,

resulting in injury.

Do not lean against the keyboard.

Entry of water, needles or hair pins may result

in breakdown or short-circuit.

The product shall not be exposed to dripping or

splashing. No objects lled with liquids, such as

vases, shall be placed on the product.

Take care not to allow any foreign

matter to enter the product.

Do not use the product in wet areas,

or areas close to water.

Doing so may cause a short circuit, leading to an

electric shock, or a fire.

5

Important Information

● Doing so may result in discoloration or deformation

of the product.

● When cleaning the product, put a soft cloth in

lukewarm water, squeeze it well, then wipe the

product.

Do not wipe the product with benzene

or thinner.

Failure to do so may damage them, resulting in

re, electric shock or short-circuit.

When connecting the AC power cord

and other cords, take care

not to get them tangled.

CAUTION

Indicates a potential hazard that could result in injury or

damage to the product or other property if the product

is handled incorrectly.

The product should be located so that its location or position does not interfere with its proper ventilation. Ensure a

minimum distance of 5cm around the product for sucient ventilation.

Failure to do so may cause breakdown of this

product and other devices.

Before connecting cords, make sure

that the power to this product

and other devices is turned

OFF.

OFF

● Doing so may cause the product to generate

noise.

● If the product generates noise, move the

product suciently away from the electrical

appliance or connect it to another AC outlet.

Do not place the product near electrical

appliances such as TVs and radios.

Failure to do so may over-heat the product,

resulting in re.

Ensure that the ventilation is not

impeded by covering the ventilation

openings with items, such as newspaper,

table-cloths, curtains, etc.

● Doing so may cause the product to become

deformed or fall over, resulting in breakdown

or injury.

Do not stand on the product or exert

excessive force.

Please lift up the product when moving it.

Please note that the product is heavy and must

be carried by more than two persons.

Dropping the product may result in breakdown.

Do not drag the product on the oor.

Take care not to drop the product.

Using the product in such areas may result in

product breakdown.

Use the product only in moderate climates (not

in tropical climates).

Do not use the product in the following areas.

● Areas, such as those near windows, where the product is

exposed to direct sunlight

● Extremely hot areas, such as near a heater

● Extremely cold areas, such as outside

● Extremely humid areas

● Areas where a large amount of sand or dust is present

● Areas where the product is exposed to excessive vibrations

Doing so may cause the illumination to fall over,

resulting in re.

Do not place naked ame, such as lighted

candles on the product.

Use only the AC adaptor included with this instrument to power the instrument.

● Do not use other AC adaptors to power this instrument.

● Do not use the included AC adaptor or AC power cord to power other equipment.

● Do not stand the main unit on its side for extended periods of time.

● Do not attempt to play the main unit at unusual angles.

Doing so may place stress on the keyboard action, resulting in breakdown of the product.

WARNING

Indicates a potential hazard that could result in death or

serious injury if the product is handled incorrectly.

WARNING - When using electric products, basic precautions should always be followed,including the following:

This product shall be near the AC outlet and the power cord plug in a position so that it can readily be

disconnected in an emergency because electricity is always charging while the plug is in the AC outlet even in a

power switch o condition.

This product may be equipped with a polarized line plug (one blade wider

than the other). This is a safety feature.

If you are unable to insert the plug into the outlet, contact an electrician to

replace your obsolete outlet.

Do not defeat the safety purpose of the plug.

● Failure to do so may cause re in case of

lightning.

● Failure to do so may over-heat the product,

resulting in re.

The product is not completely disconnected from the

power supply even when the power switch is turned

o. If the product will not be used for a long time,

unplug the AC power cord from the AC outlet.

When disconnecting the AC power cord's

plug, always hold the plug

and pull it to remove it.

● Pulling the AC power cord itself may damage

the cord, causing a re, electric shock or

short-circuit.

Do not disassemble, repair or modify

the product.

Doing so may result in product breakdown, electric

shock or short-circuit.

When using the headphones, do not

listen for long periods of

time at high volume levels.

Doing so may result in hearing problems.

Do not insert or disconnect the power

cord plug with wet hands.

Doing so may cause electric shock.

The product should be connected to

an AC outlet of the specied voltage.

● If you are going to use an AC power cord,

make sure that its has the correct plug shape

and conforms to the specied power voltage.

● Failure to do so may result in re.

120V 240V230V

Doing so may cause the product to fall over,

resulting in injury.

Do not lean against the keyboard.

Entry of water, needles or hair pins may result

in breakdown or short-circuit.

The product shall not be exposed to dripping or

splashing. No objects lled with liquids, such as

vases, shall be placed on the product.

Take care not to allow any foreign

matter to enter the product.

Do not use the product in wet areas,

or areas close to water.

Doing so may cause a short circuit, leading to an

electric shock, or a fire.

6

Important Information

The product should be serviced by qualied service personnel when:

● The power supply cord or the plug has been damaged.

● Objects have fallen, or liquid has been spilled into the product.

● The product has been exposed to rain.

● The product does not appear to operate normally or exhibits a marked change in performance.

●The product has been dropped, or the enclosure damaged.

Declaration of Conformity

Products : Electronic Piano

Model Number : ES520

Responsible Party Name : Kawai America Corporation

Address : 2055 East University Drive Rancho

Dominguez, CA 90220

Telephone 310-631-1771

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

This applies only to products distributed by Kawai America Corporation.

Notes on Repair

Should an abnormality occur in the product, immediately turn the power OFF, disconnect the power cord plug, and then

contact the shop from which the product was purchased.

CAUTION:

To prevent electric shock, match wide blade of plug to wide slot, fully insert.

ATTENTION:

Pour éviter les chocs électriques, introduire la lame la plus large de la che dans la borne correspondante de la prise et

pousser jusqu'au fond.

An information on Disposal for users

If your product is marked with this recycling symbol it means that, at the end of its life, you must dispose of it

separately by taking it to an appropriate collection point.

You should not mix it with general household waste. Disposing of this product correctly will prevent potential negative

eects on the environment and human health which could otherwise arise due to inappropriate waste handling.

For further details, please contact your local authority.

(European Union only)

Instruction for AC power cord (U.K.)

IMPORTANT

THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE.

BLUE : NEUTRAL

BROWN : LIVE

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying

the terminals in your plug, proceed as follows:

The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.

The wire which is coloured BROWN must be connected to the terminal which is marked with the letter Lor coloured RED.

Do not plug either terminal of the power cord to the the ground AC outlet on the wall.

Canadian Radio Interference Regulations

This instrument complies with the limits for a class B digital apparatus, pursuant to the Radio Interference Regulations,

C.R.C., c. 1374.

FCC Information (U.S.A)

CAUTION : Changes or modications not expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and receiver.

 Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

 Consult the dealer or an experienced radio/TV technician for help.

Nameplate

The nameplate label is located on

the underside of the instrument,

as indicated below.

7

Important Information

Displayed Icons

The product should be serviced by qualied service personnel when:

● The power supply cord or the plug has been damaged.

● Objects have fallen, or liquid has been spilled into the product.

● The product has been exposed to rain.

● The product does not appear to operate normally or exhibits a marked change in performance.

●The product has been dropped, or the enclosure damaged.

Declaration of Conformity

Products : Electronic Piano

Model Number : ES520

Responsible Party Name : Kawai America Corporation

Address : 2055 East University Drive Rancho

Dominguez, CA 90220

Telephone 310-631-1771

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

This applies only to products distributed by Kawai America Corporation.

Notes on Repair

Should an abnormality occur in the product, immediately turn the power OFF, disconnect the power cord plug, and then

contact the shop from which the product was purchased.

CAUTION:

To prevent electric shock, match wide blade of plug to wide slot, fully insert.

ATTENTION:

Pour éviter les chocs électriques, introduire la lame la plus large de la che dans la borne correspondante de la prise et

pousser jusqu'au fond.

An information on Disposal for users

If your product is marked with this recycling symbol it means that, at the end of its life, you must dispose of it

separately by taking it to an appropriate collection point.

You should not mix it with general household waste. Disposing of this product correctly will prevent potential negative

eects on the environment and human health which could otherwise arise due to inappropriate waste handling.

For further details, please contact your local authority.

(European Union only)

Instruction for AC power cord (U.K.)

IMPORTANT

THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE.

BLUE : NEUTRAL

BROWN : LIVE

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying

the terminals in your plug, proceed as follows:

The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.

The wire which is coloured BROWN must be connected to the terminal which is marked with the letter Lor coloured RED.

Do not plug either terminal of the power cord to the the ground AC outlet on the wall.

Canadian Radio Interference Regulations

This instrument complies with the limits for a class B digital apparatus, pursuant to the Radio Interference Regulations,

C.R.C., c. 1374.

FCC Information (U.S.A)

CAUTION : Changes or modications not expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and receiver.

 Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

 Consult the dealer or an experienced radio/TV technician for help.

Nameplate

The nameplate label is located on

the underside of the instrument,

as indicated below.

Panel lock icon

Displayed when panel lock is on.

USB icon

Displayed when a USB memory device is connected.

Headphone icon

Displayed when a pair of headphones is connected.

Transpose icon

Displayed when key TRANSPOSE is on.

Bluetooth icon

Displayed when Bluetooth Audio or Bluetooth MIDI is on.

* Displayed when the SPEAKER switch is o.

(Headphone icon is displayed when a pair of headphones is connected)

* Displayed when a Bluetooth connection is made.

Table of ContentsTable of Contents

8

Important Information

Table of Contents

Important Information

Important Safety Instructions ....................... 3

Displayed Icons ...................................... 7

Table of Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Welcome to the Kawai ES520 .......................10

1. Package Contents ............................10

2. Feature Highlights ............................11

Part Names and Functions ..........................12

Preparation

Setting Up the Piano ................................14

Basic Operation .....................................15

Basic Operation

Selecting Sounds .................................... 16

Demo Songs .........................................17

Dual Mode ........................................... 18

Split Mode ...........................................20

Four Hands Mode ...................................22

Enhancing the Sound ...............................24

1. Reverb ........................................24

2. Eects ........................................26

3. Amp Simulator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Panel Lock ...........................................31

Transpose ...........................................32

Metronome .......................................... 33

Rhythm ..............................................35

Registration Memories ..............................37

Song Recorder

(Internal memory) ........................39

1. Recording a Song .............................39

2. Playing a Song ................................41

3. Erasing a Song ................................43

Playing a MIDI or KSO le

(USB memory) ...............44

USB Menu ...........................................46

1. Load Registration .............................47

2. Save Internal Song ............................48

3. Save Registration .............................49

4. Rename File ...................................50

5. Delete File ....................................51

Adjustments & Settings

Settings Menus ...................................... 52

Basic Settings .......................................53

1-1. Tone Control ..................................54

Brilliance ......................................54

User EQ .......................................55

1-2. Tuning ........................................56

1-3. Damper Hold .................................56

1-4. Four Hands ...................................57

1-5. Startup Setting ...............................58

1-6. Factory Reset .................................59

1-7. Auto Display O ..............................60

1-8. Auto Power O ...............................61

Virtual Technician ...................................62

2-1. Touch Curve ..................................64

2-2. Voicing ........................................65

User Voicing ..................................66

2-3. Damper Resonance ...........................67

2-4. Damper Noise ................................67

2-5. String Resonance .............................68

2-6. Key-o Eect .................................69

2-7. Fall-back Noise ................................ 70

2-8. Hammer Delay ................................ 71

2-9. Topboard .....................................72

2-10. Decay Time ..................................73

2-11. Minimum Touch .............................73

Table of Contents

9

Important Information

Table of Contents

2-12. Temperament ...............................74

Stretch Tuning ................................75

Stretch Curve .................................76

Temperament Key ............................76

User Temperament ...........................77

2-13. User Key Volume ............................77

2-14. Half-Pedal Adjust ............................78

2-15. Soft Pedal Depth ............................78

Key Settings .........................................79

3-1. Lower Octave Shift. . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

3-2. Lower Pedal ...................................81

3-3. Split Balance ..................................81

3-4. Layer Octave Shift ............................82

3-5. Layer Dynamics ...............................83

3-6. Dual Balance .................................. 83

Phones Settings .....................................84

4-1. SHS Mode .....................................85

4-2. Phones Type ..................................86

MIDI Settings ........................................87

Bluetooth Settings ..................................87

6-1. Bluetooth Audio ..............................88

6-2. Bluetooth Audio Volume .....................89

6-3. Bluetooth MIDI ...............................90

Appendix

Connecting to Other Devices .......................91

Rear Connectors ..................................92

Upper Connectors ................................92

Front Connectors .................................92

USB MIDI

(USB to Host Connector) .........................93

Information about Bluetooth® ......................94

Troubleshooting ....................................95

Demo Song List .....................................96

EU Declaration of Conformity ....................... 97

Kawai ES520 Specications .........................98

Owner’s Manual Conventions ....................... 99

Welcome to the Kawai ES520Welcome to the Kawai ES520

10

Important Information

Welcome to the Kawai ES520

Thank you for purchasing this Kawai ES520 digital piano.

This owner’s manual contains important information regarding the usage and operation of the ES520 digital piano.

Please read all sections carefully, keeping this manual handy for future reference.

1

Package Contents

The Kawai ES520 digital piano package contains the following items:



ES520 digital piano



AC adapter (PS-154)/Power cable



Foot pedal (F-10H)



Music rack/rest



Owner’s manual

ES520

Owner’s Manual

Important Information

Preparation

Basic Operation

Adjustments & Settings

Appendix

Welcome to the Kawai ES520

11

Important Information

2

Feature Highlights

Responsive Hammer Compact II (RHC II) weighted-key keyboard action

The new Responsive Hammer Compact II (RHC II) action has been developed to reproduce the distinctive touch of an acoustic

grand piano. The weight of the keyboard is appropriately graded to mirror the heavier bass and lighter treble hammers of

acoustic pianos, with a smooth matte texture applied to each black and white key for enhanced playability. As with other

Kawai digital piano keyboard actions, Responsive Hammer Compact II utilises triple sensor hammer velocity detection, and

features a springless mechanism that delivers a smooth and natural piano playing experience.

Despite its lightweight, compact design, the RHC II action allows experienced pianists to perform with condence, playing

fortissimo with power and certainty, while delicately controlling the softest, most gentle pianissimo passages.

Shigeru Kawai SK-EX and Kawai EX instruments reproduced with Harmonic Imaging sound technology

The ES520 digital piano captures the rich, expressive sound of the Kawai SK-EX and EX grand pianos, with all 88 keys of these

exceptional instruments meticulously recorded, analysed and faithfully reproduced using Progressive Harmonic Imaging™

sound technology. This unique process accurately recreates the broad dynamic range of the original grand pianos, aording

pianists an extraordinary level of expressiveness ranging from the softest pianissimo to the strongest, boldest fortissimo.

The instrument’s built-in Virtual Technician feature allows various characteristics of these acoustic piano sounds to be shaped

at the touch of a button, with settings to adjust string and damper resonance, in addition to subtle hammer, damper, and key

release noises. This personalised piano sound is further enhanced with atmospheric reverberation eects, delivering a rich,

vibrant piano tone with breathtaking realism and authenticity.

Strong selection of additional instrument sounds

Supplementing the realistic acoustic piano voices, the ES520 digital piano also features a strong selection of additional

instrument sounds, ranging from electric pianos and drawbar and church organs, to string, choir, and mallet instruments,

inviting musicians to add greater variety to their performances.

Furthermore, the Dual playing mode also allows two dierent sounds, such as grand piano and strings, to be layered together,

while the Split and Four Hands modes divide the keyboard into two independent sections. The volume balances for each

playing mode can also be adjusted quickly and easily using the real-time panel controls.

Wide range of connectivity options

The ES520 digital piano features a variety of standard connectivity options, with Line-level output jacks that allow the

instrument to be enjoyed in larger settings such as churches and schools. Standard MIDI and USB to Host connectors ensure

exibility when using computers and other electronic instruments.

Integrated Bluetooth® 0connectivity

In addition to standard MIDI jacks for connecting to other instruments, the ES520 digital piano also boasts integrated

Bluetooth MIDI and Audio technology that allows the instrument to communicate with supported smart devices wirelessly.

Once connected to a phone, tablet, or laptop, ES520 digital piano owners can enjoy a wide variety of exciting music-related

apps that enhance their learning and playing experience, or stream audio from songs and videos through the instrument’s

speakers without additional cables.

* Availability of Bluetooth function dependent on market location.

Part Names and FunctionsPart Names and Functions

12

Important Information

Part Names and Functions

a Display

The display provides important information relating to the

currently selected sound, style, function, and setting.

* A protective plastic lm is attached to the display during production.

Please remove this lm before attempting to play the instrument.

b MENU buttons

These buttons are used to navigate through the instrument’s

various function and settings menus.

c VALUE buttons

These buttons are used to adjust values, and change settings etc.

d EXIT button

This button is used to exit the current function, or return to the

previous screen.

e USB to Device port (Type A)

This port is used to connect a FAT or FAT32 formatted USB

memory device to the instrument in order to load/save recorded

song data, registration memories, and SMF les etc.

* Use this port for connecting USB memory devices only.

* Connect the USB memory device directly, without using a USB

extension cable.

f TRANSPOSE button

This button is used to adjust the pitch of the instrument’s

keyboard in semi-tone steps.

b

f g i

l

nm

o p

a

h

c d

e

j

k

g SPLIT button

This button is used to select and adjust the instrument’s Split/

Four Hands mode functions.

h DEMO button

When pressed simultaneously, the TRANSPOSE and SPLIT

buttons are also used to select the instrument’s Demo mode.

i REGISTRATION button

This button is used to store and recall one of the 28 dierent

Registration memories. Each Registration can store sound,

reverb/eects, and Virtual Technician settings, as well as various

other panel and menu options.

j SOUND buttons

These buttons are used to select the sound(s) that will be heard

when playing the instrument’s keyboard.

These buttons are also used to select Registration memories.

k AMP/EFFECTS/REVERB buttons

These buttons are used to turn the instrument’s amp, reverb,

and eects functions on/o, and to adjust their various settings.

l (RESET) button

This button is used to reset the instrument’s song recorder, and

to rewind songs and SMF les to the beginning.

Part Names and Functions

13

Important Information

Part Names and Functions

m (REC) and

(PLAYBACK / START/STOP) buttons

These buttons are used to record and playback songs stored in

the instrument’s internal memory, or SMF les saved to a USB

memory device.

n RHYTHM / buttons

These buttons are used to select the Rhythm style.

o VOLUME button

This button is used to display the rhythm volume adjustment

screen by a single touch of the button.

p RHYTHM button

This button is used to play the rhythm.

q METRONOME button

This button is used to turn the instrument’s metronome function

on/o, and to adjust metronome settings.

r USB button

This button is used to access the instrument’s USB functions.

When pressed simultaneously, the METRONOME and USB

buttons are used to toggle the instrument’s Panel Lock feature.

q r s t

u

s MASTER VOLUME slider

This slider controls the master volume level of the instrument’s

built-in speakers, LINE OUT, and headphones, if connected.

t POWER button

This button is used to turn the instrument on and o. Be sure to

turn o the instrument after use.

* The ES520 digital piano features a power saving mode that can turn o

the instrument automatically after a specied period of inactivity. For

more information, please refer to the Auto Power O setting on page

61.

u PHONES jacks

These jacks are used to connect stereo headphones to the

instrument. Two pairs of headphones can be connected and

used simultaneously.

* For more information about connectors/jacks, please refer to page

91.

Setting Up the Piano

14

Preparation

Setting Up the Piano

Upon unboxing the instrument, please follow the instructions below which explain how to attach the music rest,

connect the F-10H (or optional GFP-3) foot pedal, and if desired, connect a pair of headphones.



Attaching the music rest

Insert the base of the music rest into the groove located at the

rear of the ES520 digital piano, taking care not to scratch the rear

of the instrument.

To prevent possible damage, avoid applying excessive force

when attaching/detaching the music rest from the instrument.



Connecting the F-10H foot pedal

Connect the included Kawai F-10H foot pedal to the DAMPER

pedal jack located on the rear panel of the instrument.

The foot pedal will function as a damper pedal, sustaining the

sound after hands are lifted from the keyboard. This pedal is

capable of responding to “half pedaling”.



Connecting the optional GFP-3 triple pedal

Connect the optional Kawai GFP-3 triple pedal to the DAMPER/

SOFT pedal jack located on the rear panel of the instrument.

The right pedal will function as a damper pedal, sustaining the

sound after hands are lifted from the keyboard. This pedal is also

capable of responding to “half pedaling”.

The centre pedal will function as a sostenuto pedal, and the left

pedal will function as a soft pedal.

* When “Jazz Organ”, “Drawbar Organ” or “Ballad Organ” sounds are

selected, the soft pedal can also be used to alternate the speed of the

rotary speaker eect between “Slow” and “Fast” modes.



Connecting headphones

Use the jacks located on either side of the keyboard to connect

stereo headphones to the ES520 digital piano.

There are one standard jack and one mini jack so up to two pairs

of headphones can be connected. When a pair of headphones is

connected, sound will not be produced by the built-in speakers.



Turning built-in speakers on/o

Set the SPEAKER switch located on the rear panel to the O

position to disable the instrument’s built-in speakers. Set the

switch to the On position to enable the speakers.

* When a pair of headphones is connected, sound will not be producedfrom

the built-in speakers regardless of the status of the SPEAKER switch.

15

Preparation

Basic Operation

The following instructions explain how to connect the instrument to the power outlet, turn on the power, adjust the

volume to a comfortable level, and begin playing the piano.

1. Connecting the power adaptor

Connect the included AC power adaptor to the “DC IN” jack

located on the rear panel of the instrument, indicated below.

Connect the AC power adaptor to an AC outlet.

2. Turning on the instrument’s power

Press the POWER button located on the right side of the

instrument’s control panel.

The instrument will turn on, and the words “SK ConcertGrand”

will be shown in the display, indicating that the SK ConcertGrand

sound is selected. The LED indicator for the PIANO 1 button will

also turn on.

* The ES520 digital piano features a power saving mode that can turn o the

instrument automatically after a specied period of inactivity. For more

information, please refer to the Auto Power O setting on page 61.

3. Adjusting the volume

The MASTER VOLUME slider controls the volume level of the

instrument’s speakers, LINE OUT, and headphones if connected.

Move the slider to the right to increase the volume, and to the

left to decrease the volume.

Use this slider to set the volume to a comfortable listening level

- the middle is often a good starting point.

4. Play the piano

Begin playing the piano.

The rich sound of a Kawai SK-EX Concert Grand Piano will be

heard as the keys are pressed.

LED indicator on:

Sound category is selected.

Right:

Increase

volume

Left:

Decrease

volume

Selecting Sounds

16

Basic Operation

Selecting Sounds

The ES520 digital piano features a wide selection of realistic instrument sounds suitable for various musical styles.

Sounds are arranged into seven categories, with multiple sounds assigned to each category button.

By default, the “SK ConcertGrand” sound will be selected automatically when the instrument is turned on.



Sound categories and variations

PIANO 1

1 SK ConcertGrand

2 EX ConcertGrand

3 Jazz Clean

4 Warm Grand

PIANO 2

1 Upright Piano

2 Pop Grand

3 Modern Piano

4 Rock Piano

E. PIANO

1 Classic E.Piano

2 Classic E.P. 2

3 60’s E.Piano

4 60’s E.Piano 2

5 Modern E.Piano

ORGAN

1 Jazz Organ

2 Drawbar Organ

3 Ballad Organ

4 Principal Oct.

5 Church Organ

HARPSI / MALLETS

1 Harpsichord

2 Vibraphone

3 Clavi

4 Marimba

STRINGS / CHOIR

1 String Ensemble 5 Choir

2 Slow Strings 6 Square Pad

3 String Pad 7 New Age Pad

4 Warm Strings

BASS

1 Electric Bass

2 Electric Bass 2

3 Electric Bass 3

4 Wood Bass

5 W. Bass & Ride

1. Selecting a sound category

Press the desired SOUND button.

The LED indicator for the button will turn on to indicate that this

category has been selected, and the name of the sound will be

shown in the display.

2. Changing the selected sound variation

Several sound variations are assigned to each category button.

Press a SOUND button repeatedly to cycle through the dierent

sound variations.

The or VALUE buttons can also be used to select sounds,

and cycle through the dierent sound variations.

Example: To select the E.PIANO category, press the

E.PIANO button.

Example: To select the “Pop Grand” sound, press

the PIANO2 button two times.

× 3

17

Basic Operation

The Demo function provides an excellent introduction to the varied capabilities of the ES520 digital piano.

There are 23 dierent demonstration songs available, highlighting the instrument’s rich selection of high quality

sounds and powerful speaker system.

For a complete listing of the available demonstration songs, please refer to page 96 of this owner’s manual.

* Kawai regrets that sheet music for Kawai original demo songs is not available.

1. Entering demo mode

Press the TRANSPOSE and SPLIT buttons simultaneously.

The LED indicators for both buttons will start to ash to indicate

that demo mode is in use, and the Demo song will start to play.

Demo song name

* When the Demo song has nished, a sound demo song will be selected

at random, and will start to play.

2. Selecting a demo song

While Demo mode is selected and the demo songs are playing:

Press the desired SOUND button.

The LED indicator for the button will start to ash, and the rst

demo in the selected sound category will start to play.

Press the selected sound category button repeatedly to cycle

through the dierent demo songs in that category.

The or VALUE buttons can also be used to cycle through all

of the dierent demo songs.

The or MENU buttons can be used to switch for each group.

3. Stopping the demo song and exiting demo mode

While Demo mode is selected and the demo songs are playing:

Press the EXIT button.

The LED indicators will stop ashing, the demo songs will stop

playing, and the instrument will return to normal playing mode.

* The TRANSPUSE button or SPLIT button can also be used to stop them.

Example: To select the Warm Grand demo song,

press the PIANO1 button four times.

× 4

Demo Songs

Dual ModeDual Mode

18

Basic Operation

Dual Mode

The Dual Mode function allows two sounds to be layered together, creating a more complex sound.

For example, a piano sound layered with strings, or a church organ combined with a choir, etc.

1. Entering Dual mode

Press and hold a SOUND button to select the main sound, then

press another SOUND button to select the layered sound.

The LED indicators for both SOUND buttons will turn on to

indicate that Dual mode is in use, and the respective sound

names will be shown in the display.

Main sound

Layered sound

2. Changing the main/layered sounds

To select a dierent variation for the layered sound:

Press and hold the main SOUND button, then press the layered

SOUND button repeatedly to cycle through the dierent sound

variations.

To select a dierent variation for the main sound:

Press and hold the layered SOUND button, then press the main

SOUND button repeatedly to cycle through the dierent sound

variations.

To layer two variations assigned to the same SOUND button:

Press and hold a SOUND button, then press the

or VALUE

buttons to select the layered sound variation.

* Preferred Dual mode sound combinations can be stored to a

Registration memory for convenient recall. Please refer to page 37

for more information.

hold

Example: To layer the “Slow Strings” sound with the “SK

ConcertGrand” sound, press and hold the PIANO1 button,

then press the STRINGS/CHOIR button.

hold

Example: To change the layered “String Ensemble” sound to

the “Slow Strings” sound, press and hold the PIANO1 button,

then press the STRINGS/CHOIR button.

hold

× 2

Example: To change the main “SK ConcertGrand” sound to

the “Jazz Clean” sound, press and hold the STRINGS/CHOIR

button, then press the PIANO1 button twice.

hold

× 2

Example: To layer the “Classic E.P.” and “60’s E.Piano” sounds

together, press and hold the E.PIANO button, then press the

VALUE button twice.

Dual Mode

19

Basic Operation

3. Adjusting the main/layered sound volume balance

While Dual mode is in use:

Press the

or VALUE buttons to adjust the volume balance

between the main and layered sounds.

The volume balance will briey be shown in the display.

* The default Dual mode volume balance is 9-9.

* The preferred Dual mode volume balance can also be stored to a

Registration memory for convenient recall. Please refer to page 37

for more information.

* The Layer Octave Shift setting can be used to adjust the octave range

of the layered sound. Please refer to page 82 for more information.

* The Layer Dynamics setting can be used to adjust the dynamic

sensitivity of the layered sound. Please refer to page 83 for more

information.

4. Exiting Dual mode

While Dual mode is in use:

Press a single SOUND button.

The LED indicator for the button will turn on, the name of the

selected sound will be shown in the display, and the instrument

will return to normal (single voice mode) operation.

VALUE

Increase layered

sound volume/

decrease main

sound volume.

VALUE

Increase main

sound volume/

decrease layered

sound volume.

Example: To decrease the volume of the main

sound to 5, press the VALUE button ve times.

× 5

Dual Mode

Split ModeSplit Mode

20

Basic Operation

Split Mode

The Split Mode function divides the keyboard into two sections, allowing each section to be played with a dierent

sound. For example, a bass sound in the lower section, and a piano sound in the upper section.

1. Entering Split mode

Press the SPLIT button.

The LED indicator for the SPLIT button will turn on and the

keyboard is split at the point between F#3 and G3.

G3 where the upper section begins, is called the split point.

The default split point is G3.

The LED indicator for the upper section sound button will turn

on, and the LED indicator for the lower section sound button will

start to ash. The respective sound names will also be shown in

the display.

Split enabled

Upper section

sound

Lower section

sound

2. Changing the upper/lower section sounds

To select a dierent sound for the upper section:

Press the desired SOUND button.

To select a dierent sound for the lower section:

Press and hold the SPLIT button, then press the desired SOUND

button.

* The Lower Octave Shift setting can be used to adjust the octave range

of the lower section. Please refer to page 80 for more information.

* The Lower Pedal setting can be used to enable/disable the damper

pedal for the lower section. Please refer to page 81 for more

information.

* Preferred Split mode upper/lower sound combinations can be stored

to a Registration memory for convenient recall. Please refer to page

37 for more information.

Default Split mode:

The previously selected sound is used for the upper section, and

the “Wood Bass” sound is selected for the lower section.

Example: To select the “Jazz Organ” sound for the upper

section, press the ORGAN button.

hold

Example: To select the “W. Bass & Ride” sound for the lower

section, press and hold the SPLIT button, then press the BASS

button.

La pagina sta caricando ...

Kawai KDP90 Manuale del proprietario

Kawai KDP90 Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti