IMPORTANT SAFETY AND LEGAL INFORMATION
13
Installation, Use, and Maintenance
IMPORTANT Do not attempt to service this product yourself. Do
not open, puncture, or disassemble the product.
In order for the GPS Navigator Car Kit to work properly, make sure
that the receiver has an unobstructed view of the sky. Protect the
GPS Navigator Car Kit from excessive heat, extreme cold, dust,
liquids, and direct sunlight. Do not use in a humid environment or on
an unstable surface. Make sure the GPS Navigator Car Kit is always
securely mounted to prevent accidental movement. Handle all parts,
cables, and connectors with care. Use only supplied and
recommended accessories and power supplies. Ensure that any
power supply is cooled by placing it in a ventilated area. The power
supply and the GPS Navigator Car Kit may become warm or hot
during operation. Unplug the product from any external power source
before cleaning. Only clean the product with a dry cloth. Follow the
instructions in this manual carefully.
FCC statement
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the GPS Navigator Car Kit.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The use of shielded I/O cables is required when connecting this
equipment to any and all optional peripheral or host devices. Failure
to do so may violate FCC rules.
IMPORTANT Changes or modifications not covered in this manual
must be approved in writing by the manufacturer’s Regulatory
Engineering Department. Changes or modifications made without
written approval may void the user’s authority to operate this
equipment.
Responsible Party
Palm, Inc.
950 W. Maude Avenue
Sunnyvale, CA 94085-2801
United States of America
(408) 617-7000
www.palm.com
Canadian ICES-003 Statement
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Cet appareil numérique de la classe B respecte toutes les exigences
du Réglement sur le matériel brouilleur du Canada. Son utilisation est
sujette aux deux conditions suivantes: (1) Cet appareil ne doit pas
produire d’interférences nuisibles et (2) il doit pouvoir supporter toute
Palm GPS Navigator Car Kit
Tested to Comply
With FCC Standard
FOR HOME OR OFFICE USE