Palm GPS 3301 Manuale del proprietario

Tipo
Manuale del proprietario

Questo manuale è adatto anche per

GPS Navigator
Navigateur GPS
Navegador GPS
GPS 导航器
GPS
導航器
Contents
English. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Deutsch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Français . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Español . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Italiano. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Português . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Nederlands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
简体中文 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
繁體中文 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Intellectual property notices
© 2006 Palm, Inc. All rights reserved.
Palm, Treo, Palm OS, and the Palm logo are among the trademarks or
registered trademarks owned by or licensed to Palm, Inc. All other
brand and product names are or may be trademarks of, and are used
to identify products or services of, their respective owners.
The TREO trademark is used by Palm in Sweden and Denmark with
the express consent of Pfizer and its affiliated companies. The
products marketed and/or sold by Palm under the TREO trademark
are in no way affiliated with Pfizer or its business.
Varumärket TREO används av Palm i Sverige och Danmark med
uttryckligt tillstånd från Pfizer och dess dotterbolag. De produkter
som marknadsförs och/eller säljs av Palm under varumärket TREO
ska på inget sätt alls kopplas samman med Pfizer eller dess
verksamhet.
TREO-varemærket anvendes af Palm i Danmark og Sverige med
udtrykkelig tilladelse fra Pfizer og Pfizers associerede selskaber. De
produkter, der markedsføres og/eller sælges af Palm under
TREO-varemærket, er på ingen måde tilknyttet Pfizer eller Pfizers
virksomhed.
© 2006 TomTom International B.V., The Netherlands. Patents
Pending. All rights reserved.
TomTom and the TomTom logo are registered trademarks of TomTom
International B.V., The Netherlands. All other trademarks are the
property of their respective owners. Our end user license agreement
and a limited warranty apply to this product; they are included in this
package. You can also review both at www.tomtom.com/legal
.
Disclaimer and limitation of liability
Palm, Inc. assumes no responsibility for any damage or loss resulting
from the use of this guide.
Palm, Inc. assumes no responsibility for any loss or claims by third
parties which may arise through the use of this device and any
accompanying or associated software provided by Palm, Inc.
Palm, Inc. assumes no responsibility for any damage or loss caused
by deletion of data as a result of malfunction, dead battery, or repairs.
Be sure to make backup copies of all important data on other media
to protect against data loss.
NOTE Please read the End User Software License Agreement
included with this product before using the accompanying software
program(s). Using any part of the software indicates that you accept
the terms of the End User Software License Agreement.
v 2.0
GETTING STARTED
4
Getting started
The Palm
®
GPS Navigator provides detailed
maps, route planning, and voice navigation.
The GPS Navigator uses TomTom
NAVIGATOR software and maps on your
device. To use Navigator, your device
makes a wireless connection to the
included GPS receiver using Bluetooth
®
wireless technology. The receiver then
transmits information to the NAVIGATOR
software that is displayed on your device
screen.
This guide explains how to set up the
TomTom NAVIGATOR software on your
device. Certain steps for setting up the
NAVIGATOR software are different
depending on whether you have a
compatible device that runs on Palm OS
®
software or a compatible device that runs
on Windows Mobile
®
software.
Compatible Palm OS devices
Palm
®
Treo
650 smartphone
Palm
®
Treo
680 smartphone
Palm
®
Treo
700p smartphone
Compatible Windows Mobile devices
Palm
®
Treo
700w or 700wx
smartphone
Palm
®
Treo
750 or 750v smartphone
For information on setting up the GPS
receiver, see the GPS Navigator Setup
poster included in this package. For more
detailed instructions on using TomTom
NAVIGATOR, refer to the TomTom
NAVIGATOR Quick Start Guide.
INSTALLATION REQUIREMENTS
5
Installation
requirements
One of the compatible devices listed
above. For information on other
supported devices, visit the Palm
website at www.palm.com
.
GPS receiver (included).
Expansion card (included).
Setting up
NAVIGATOR
software on your
device
Install NAVIGATOR software
1 Turn the GPS receiver on and position it
in a location with an unobstructed view
of the sky.
2 Make sure your device’s Bluetooth
functionality is turned on:
Palm OS devices Go to Applications
and select Bluetooth . Select On if
it is not already selected.
Windows Mobile devices Go to the
Today screen and tap Bluetooth .
Check the Turn on Bluetooth box if it is
not already checked.
SETTING UP NAVIGATOR SOFTWARE ON YOUR DEVICE
6
3 Insert the TomTom NAVIGATOR
expansion card included in this package
into your device’s expansion card slot.
4 On a Windows Mobile device, select
Ye s if prompted. After the installation is
complete, select OK.
NOTE On a Palm OS device, the software
application opens automatically.
Select your basic NAVIGATOR settings
1 Tap the language you want, and then
tap Ye s .
2 When prompted, tap the screen to
begin preference selection.
3 Select right- or left-handed operation,
and then tap Done.
4 Select how distances are displayed, and
then tap Done.
5 Select how time is displayed, and then
tap Done.
6 Tap the left and right arrows to select a
voice, and then tap Select.
7 If prompted to select a map, tap the
map you want.
Tap to scroll
voice
options
SETTING UP NAVIGATOR SOFTWARE ON YOUR DEVICE
7
Activate the NAVIGATOR software
1 If you have a data plan with your
wireless carrier, tap Automatic. If you
do not have a plan or aren’t sure, tap
Manual.
2 If you selected Automatic, tap Activate
and then enter the 15-character code
printed on the product code label. The
software is activated through your
device’s wireless connection.
3 If you selected Manual, do the
following:
On your computer, go to
www.ttcode.com
and select the
Product Activation option for your
country.
Enter the 15-character code printed
on the product code label, and then
enter the device code displayed on
your device screen.
On your device, tap Activate.
xxxxx-xxxxx-xxxxx
Product code
xxxxx-xxxxx-xxxxx
Product
code
Device
code
SETTING UP NAVIGATOR SOFTWARE ON YOUR DEVICE
8
Enter the activation code displayed on
your computer screen.
4 Tap Done.
Complete NAVIGATOR software setup
1 Tap Continue, and then tap Ye s .
2 Enter or scroll to your zip code or city,
and then tap it when it is displayed.
3 Enter or scroll to your street name, and
then tap it when it is displayed.
4 Enter your house number, and then tap
Done.
5 On the Select your GPS receiver screen,
select To m To m / Pa l m G P S , and then
tap Select.
6 Do one of the following:
Palm OS devices If prompted, enter
the four-digit passkey 0000 (four
zeroes), and then select Add to trusted
devices list. You need to enter the
passkey the first time you create a
partnership between your device and
the receiver only.
EXITING NAVIGATOR
9
Windows Mobile devices Once you
tap Select, your device creates a
partnership with the receiver
automatically.
7 Repeatedly tap the screen to take a tour
of NAVIGATOR.
8 On the Legal notice screen, read the
information and then tap I agree if you
agree.
NOTE You must tap I agree to use the
software.
NAVIGATOR is now ready for use on your
device.
Exiting NAVIGATOR
You should exit the NAVIGATOR application
when you are finished using it.
1 On the NAVIGATOR navigation screen,
tap the top portion of the screen to
open the Main Menu.
2 Tap the blue arrow until the Main Menu
3 of 3 screen is displayed.
3 Tap Exit application.
COMMON QUESTIONS
10
Common questions
What is the passkey I’m asked to enter
when creating a partnership between my
device and the Bluetooth
®
GPS receiver?
Like a password, the passkey is a security
measure. Connections can happen only
between your device and a Bluetooth
device that has the same passkey.
The passkey for the receiver is 0000 (four
zeroes). You should need to enter the
passkey only the first time you establish a
Bluetooth connection between your device
and the receiver.
My device does not seem like it
successfully connected to the receiver
after setup. What should I do?
If the setup process does not seem to
work, try manually creating a partnership
between your device and the receiver.
For Palm OS devices:
1 Go to Applications and select
Bluetooth .
2 Select On if it is not already selected.
3 Select Setup Devices, and then select
Trusted Devices.
4 Select Add Device.
5 Select the GPS receiver from the
discovery results list. If the receiver
doesn’t appear in the list, select Find
More.
6 Enter the four-digit passkey 0000 (four
zeroes) on your device.
7 Select Done.
For Windows Mobile devices:
1 Go to your Today screen and tap
Bluetooth .
2 Check the Turn on Bluetooth box if it is
not already checked.
3 Select the Devices tab, and then select
New Partnership.
4 Select the GPS receiver from the device
list, and then press Next (right
action key).
5 Enter the four-digit passkey 0000 (four
zeroes) on your device, and then press
Next (right action key).
COMMON QUESTIONS
11
6 Check the Serial Port box, and then
press Finish (right action key).
7 Press OK .
Should I keep my device and the receiver
connected to the vehicle power adapter
while they are in use?
If your device is fully charged, it can run for
about four to five hours in the car. For
longer trips, it is a good idea to keep the
vehicle power adapter connected to keep
both your device and the receiver charged.
This prevents the batteries from getting
too low for the Bluetooth connection to
function.
Where can I get customer support if I
need it?
Go to the Palm website at
www.palm.com/support
.
IMPORTANT SAFETY AND LEGAL INFORMATION
12
Important safety and
legal information
Please read the following information to ensure safe use of the GPS
Navigator.
Global Positioning System
The Global Positioning System (GPS) is a satellite-based system that
provides location and timing information around the globe. GPS is
operated and controlled under the sole responsibility of the
Government of the United States of America, which is responsible for
its availability and accuracy. Any changes in GPS availability and
accuracy may impact the operation of your GPS receiver.
Environmental conditions will affect the operation of your GPS
receiver. TomTom B.V. and Palm cannot accept any liability for the
availability and accuracy of GPS.
Use With Care
Use of a GPS receiver for navigation does not by any means
substitute for the need to drive with due care and attention.
WARNING!
Do not mount the GPS Navigator where the driver’s field of vision is
obscured or where airbags may deploy, and do not place it on the
dashboard without securing it reliably. Do not mount the unit or route
the cables in such a way as to interfere with control of the vehicle.
Failure to follow these guidelines could result in an accident or
collision resulting in serious injury or death.
Drive safely using information from street signs and landmarks in
addition to the GPS Navigator. Do not become distracted by the GPS
Navigator while operating the vehicle. Use voice prompts to minimize
the need to look at the display. Do not input destinations or access
other functions that take time to complete unless the vehicle is safely
stopped. Make all settings before departing or pull off the road in a
safe and legal manner if changes need to be made.
CAUTION
Use GPS Navigator only as an aid to navigation. It is not designed for
any use requiring precise measurements. The Global Positioning
System (GPS) is operated by the government of the United States of
America and is subject to changes which could affect the accuracy
and performance of this GPS equipment.
NOTICE TO DRIVERS
When using this product you must obey your local vehicle codes.
Some vehicle codes restrict any object or material from being placed,
displayed, installed, affixed, or applied upon the windshield or side or
rear windows. Where such codes exist, when using this product, the
suction cup mount pad should be used instead of attaching the
mount directly to the vehicle windshield or side or rear windows.
Palm is not responsible for any damages, fines, or penalties that may
result from disregarding this notice.
Aircraft and Hospitals
Use of devices with an antenna is prohibited on most aircraft, in many
hospitals, and in many other locations. The GPS receiver must not be
used in these environments.
Heat-Reflective Shields
Some newer-model vehicles may have a heat-reflective shield
embedded in the windshield, which may prevent proper GPS signal
reception if the receiver is placed behind the windshield. To enable
proper reception:
Place the receiver in a different position, or
Place the receiver behind the rearview mirror, where many
vehicles have an opening in the heat reflective shield, as
indicated by a black outline.
Installation, Use, and Maintenance
IMPORTANT Do not attempt to service this product yourself. Do
not open, puncture, or disassemble the product.
In order for the GPS receiver to work properly, make sure that the
receiver has an unobstructed view of the sky. Protect the receiver
IMPORTANT SAFETY AND LEGAL INFORMATION
13
from excessive heat, extreme cold, dust, liquids, and direct sunlight.
Do not use in a humid environment or on an unstable surface. Make
sure the receiver is always securely mounted to prevent accidental
movement. Handle all parts, cables, and connectors with care. Use
only supplied and recommended accessories and power supplies.
Ensure that any power supply is cooled by placing it in a ventilated
area. The power supply and the receiver unit may become warm or
hot during operation. Unplug the product from any external power
source before cleaning. Only clean the product with a dry cloth.
Follow the instructions in this manual carefully.
FCC statement
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
The use of shielded I/O cables is required when connecting this
equipment to any and all optional peripheral or host devices. Failure
to do so may violate FCC rules.
IMPORTANT Changes or modifications not covered in this manual
must be approved in writing by the manufacturers Regulatory
Engineering Department. Changes or modifications made without
written approval may void the users authority to operate this
equipment.
Responsible Party:
HOLUX Technology, Inc.
1F, No.30, R&D Rd. II,
Hsinchu City 300,
Taiwan (R.O.C)
+886-3-6687000
Canadian ICES-003 Statement
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Cet appareil numérique de la classe B respecte toutes les exigences
du Réglement sur le matériel brouilleur du Canada. Son utilisation est
sujette aux deux conditions suivantes: (1) Cet appareil ne doit pas
produire d’interférences nuisibles et (2) il doit pouvoir supporter toute
interférence reçue, même si ces interférences perturbent son
fonctionnement.
Palm GPS Navigator
Tested to Comply
With FCC Standard
FOR HOME OR OFFICE USE
IMPORTANT SAFETY AND LEGAL INFORMATION
14
CE Compliance Statement
This product was tested by Palm, Inc. and found to comply with all
the requirements of the EMC Directive 89/336/EEC as amended.
Static Electricity, ESD, and Your Palm Device
Electrostatic discharge (ESD) can cause damage to electronic devices
if discharged into the device, so you should take steps to avoid such
an occurrence.
Description of ESD Static electricity is an electrical charge caused by
the buildup of excess electrons on the surface of a material. To most
people, static electricity and ESD are nothing more than annoyances.
For example, after walking over a carpet while scuffing your feet,
building up electrons on your body, you may get a shock-the
discharge event-when you touch a metal doorknob. This little shock
discharges the built-up static electricity.
ESD-susceptible equipment Even a small amount of ESD can harm
circuitry, so when working with electronic devices, take measures to
help protect your electronic devices, including your Palm® device,
from ESD harm. While Palm has built protections against ESD into its
products, ESD unfortunately exists and, unless neutralized, could
build up to levels that could harm your equipment. Any electronic
device that contains an external entry point for plugging in anything
from cables to docking stations is susceptible to entry of ESD.
Devices that you carry with you, such as your Palm device, build up
ESD in a unique way because the static electricity that may have built
up on your body is automatically passed to the device. Then, when
the device is connected to another device such as a docking station, a
discharge event can occur.
Precautions against ESD Make sure to discharge any built-up static
electricity from yourself and your electronic devices before touching
an electronic device or connecting one device to another. The
recommendation from Palm is that you take this precaution before
connecting your Palm device to your computer, placing a device in a
cradle, or connecting it to any other device. You can do this in many
ways, including the following:
Ground yourself when you're holding your device by
simultaneously touching a metal surface that is at earth ground.
For example, if your computer has a metal case and is plugged
into a standard three-prong grounded outlet, touching the case
should discharge the ESD on your body.
Increase the relative humidity of your environment.
Install ESD-specific prevention items, such as grounding mats.
Conditions that enhance ESD occurrences Conditions that can
contribute to the buildup of static electricity in the environment
include the following:
Low relative humidity.
Material type. (The type of material gathering the charge. For
example, synthetics are more prone to static buildup than natural
fibers like cotton.
The rapidity with which you touch, connect, or disconnect
electronic devices.
While you should always take appropriate precautions to discharge
static electricity, if you are in an environment where you notice ESD
events, you may want to take extra precautions to protect your
electronic equipment against ESD.
For information on environmental programs, visit
www.palm.com/environment
.
Hinweise zu geistigem Eigentum
© 2006 Palm, Inc. Alle Rechte vorbehalten.
Palm, Treo, Palm OS und das Palm-Logo sind Marken oder
eingetragene Marken im Eigentum von bzw. lizenziert an Palm, Inc.
Alle anderen Marken und Produktnamen sind Marken der jeweiligen
Eigentümer und werden zur Erkennung von Produkten oder
Dienstleistungen verwendet.
© 2006 TomTom International B.V., Niederlande. Zum Patent
angemeldet. Alle Rechte vorbehalten.
TomTom und das TomTom-Logo sind eingetragene Marken von
TomTom International B.V., Niederlande. Alle anderen Marken sind
Marken ihrer jeweiligen Eigentümer. Für dieses Produkt gelten unser
Endbenutzer-Lizenzvertrag und eine eingeschränkte Garantie; im
Lieferumfang enthalten. Beide können unter www.tomtom.com/legal
eingesehen werden.
Haftungsausschluss und Haftungsbegrenzung
Palm, Inc. übernimmt keine Haftung für Schäden oder Verluste, die
aus der Verwendung dieses Handbuchs resultieren.
Palm, Inc. übernimmt keine Haftung für Verluste oder Ansprüche
Dritter, die aus der Verwendung dieses Geräts und der zugehörigen
von Palm, Inc. bereitgestellten Software entstehen.
Palm, Inc. übernimmt keine Haftung für Schäden oder Verluste, die
durch Löschen von Daten als Folge von Fehlfunktionen, leeren Akkus
oder Reparaturen verursacht werden. Erstellen Sie stets Backup-
Kopien aller wichtigen Daten auf anderen Medien, um Datenverlust
vorzubeugen.
HINWEIS Lesen Sie die im Lieferumfang enthaltene
Lizenzvereinbarung für Endbenutzer, bevor Sie die Arbeit mit dem
bzw. den begleitenden Softwareprogramm(en) aufnehmen. Durch
Verwendung eines beliebigen Teils der Software erklären Sie sich mit
den Bedingungen der Lizenzvereinbarung für Endbenutzer
einverstanden.
V2.0
ERSTE SCHRITTE
16
Erste Schritte
Der Palm
®
-GPS-Navigator bietet detaillierte
Straßenkarten, Routenplanung und
sprachgestützte Navigation.
Der GPS-Navigator verwendet TomTom
NAVIGATOR-Software und -Karten auf
Ihrem Gerät. Zur Benutzung des Navigators
stellt Ihr Gerät über Bluetooth
®
eine
drahtlose Verbindung zum mitgelieferten
GPS-Empfänger her. Der Empfänger
überträgt dann die Informationen an die
NAVIGATOR-Software, die auf dem
Bildschirm Ihres Geräts zu sehen ist.
In dieser Anleitung finden Sie
Informationen zur Einrichtung der TomTom
NAVIGATOR-Software auf Ihrem Gerät.
Bestimmte Schritte zur Einrichtung der
NAVIGATOR-Software variieren, je
nachdem, ob Sie ein kompatibles Gerät mit
Palm OS
®
-Software oder ein kompatibles
Gerät mit Windows Mobile
®
-Software
besitzen.
Kompatible Palm OS-Geräte
Palm
®
Treo
650-Smartphone
Palm
®
Treo
680-Smartphone
Palm
®
Treo
700p-Smartphone
Kompatible Windows Mobile-Geräte
Palm
®
Treo
700w- oder 700wx-
Smartphone
Palm
®
Treo
750- oder 750v-
Smartphone
Weitere Anweisungen zur Einrichtung des
GPS-Empfängers enthält das im
Lieferumfang enthaltene Poster Einrichtung
des GPS-Navigators. Weitere
Anweisungen zur Benutzung von TomTom
NAVIGATOR enthält das Handbuch
TomTom NAVIGATOR Quick Start Guide
(TomTom-Kurzanleitung).
INSTALLATIONS ANFORDERUNGEN
17
Installations-
anforderungen
Eines der oben aufgeführten
kompatiblen Geräte. Informationen zu
anderen unterstützten Geräten finden
Sie auf der Palm-Website
(www.palm.com
).
GPS-Empfänger (mitgeliefert).
Erweiterungskarte (mitgeliefert).
Einrichten der
NAVIGATOR-
Software auf dem
Gerät
Installieren der NAVIGATOR-Software
1 Schalten Sie den GPS-Empfänger ein
und positionieren Sie ihn so, dass die
Sicht auf den Himmel nicht blockiert ist.
2 Stellen Sie sicher, dass die Bluetooth-
Funktion Ihres Geräts eingeschaltet ist:
Palm OS-Geräte Gehen Sie zur
Anwendungsansicht und wählen Sie
Bluetooth . Tippen Sie auf die
Option Ein, sofern sie noch nicht
aktiviert ist.
EINRICHTEN DER NAVIGATOR-SOFTWARE AUF DEM GERÄT
18
Windows Mobile-Geräte Gehen Sie
zum Bildschirm „Today“ (Heute) und
tippen Sie auf Bluetooth . Aktivieren
Sie das Kontrollkästchen Tu rn o n
Bluetooth (Bluetooth einschalten), falls
noch nicht geschehen.
3 Schieben Sie die mitgelieferte TomTom
NAVIGATOR-Erweiterungskarte in den
Erweiterungskartensteckplatz Ihres
Geräts ein.
4 Wenn Sie ein Gerät mit Windows
Mobile verwenden, wählen Sie Ja, falls
eine Aufforderung angezeigt wird.
Wählen Sie nach Abschluss der
Installation OK.
HINWEIS Auf einem Gerät mit Palm OS
wird die Softwareanwendung automatisch
geöffnet.
Wählen Sie die NAVIGATOR-
Haupteinstellungen aus
1 Tippen Sie auf die gewünschte Sprache
und dann auf Ja.
2 Wenn Sie dazu aufgefordert werden,
tippen Sie auf den Bildschirm, um mit
der Auswahl der gewünschten
Voreinstellungen zu beginnen.
3 Geben Sie an, ob Sie die Anwendung
mit der rechten oder linken Hand
bedienen möchten und tippen Sie dann
auf Fertig.
4 Geben Sie an, ob Entfernungen in
Meilen oder Kilometer angezeigt
werden sollen und tippen Sie dann auf
Fertig.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128

Palm GPS 3301 Manuale del proprietario

Tipo
Manuale del proprietario
Questo manuale è adatto anche per