Lindy Test-i Pro 43069 Manuale utente

Lindy
Marca
Lindy
Modello
Test-i Pro 43069
Categoria
Tester di rete via cavo
Tipo
Manuale utente
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (JAN 2012)
Multi-Function Cable Tester Pro
Manual English
LINDY No. 43069
www.lindy.com
User Manual
Introduction
Thank you for purchasing the LINDY Multi-Function Cable Tester Pro. This Cable Tester allows you to test and analyse
a comprehensive range of connector types and commonly used cables.
The Cable Tester Pro includes a wire mapping function to test each pins connection and identify cable connectivity. It
also shows pin–to–pin connectivity and can save up to 100 separate test results. This Data can then be saved and
uploaded to a PC via the USB interface for further analysis.
Cable pin wiring is easily and efficiently determined using the integrated LCD display. Specific cable pin wirings can
also be set as profiles for Quick or Batch Testing. The unit also includes a built–in extension port for additional types of
cable testing, a feature not included on previous
cable testers.
The
Cable Tester Pro is excellent for performing pin-to-pin tests on a variety of PC cables and as a diagnostic and
troubleshooting device.
Features
• Identify cable connectivity
• Support 17 types of PC connectors
• Extension port for additional types of cable testing
• 100 test results can be saved and transferred to PC via USB interface
• Alphanumeric LCD display with back light function
• Includes test cable, browse and quick test function
• Low battery indicator
Specifications
• Connectors - IDC40, IDC40 extension port, HD15 M/F, Audio 3.5mm, RJ11, RJ45, eSATAp 5V, SATA 7pin,
DisplayPort, USB 2.0/3.0 Type A,
USB 2.0/3.0 Type B, USB 2.0 Micro-A/B & 3.0 Micro-B, USB 2.0 Mini–B,
HDMI,
Mini HDMI, Micro HDMI
• LCD Display - 2 rows, 16 characters with backlight
• Power - DC 9V battery compartment, USB interface for static power supply
Button Definitions
• ON/OFF - power on/off the tester
• UP/DOWN - select functions
• SAVE - save the test result for download and analysis
• DELETE - delete records
• BACK - returns to previous selection
• ENTER - run the selected function
User Manual
Operating Instructions
Press the ON/OFF button to power up the tester, a ‘beep’ will indicate the tester is working. Press the ON/OFF button
once more to switch the tester fully on.
Quickly press the ON/OFF button once to switch the LCD’s back light on/off. By holding the ON/OFF button the LCD
will display the following message.
The tester will power down when you release the button.
Functions
Press the UP or DOWN buttons to select the desired mode:
Pin Test: for pin-to-pin cable testing.
Quick Test: for testing against a defined standard.
Browse: to review saved data.
Delete: to delete records.
Settings: to set buzzer on/off, quick test result details on/off, auto function on/off, and reviewing firmware information.
Press ENTER for the desired selection.
PinTest
Use the UP or DOWN buttons to select the pin number for the cable you want to test, then press ENTER to start
testing.
When testing is complete the LCD will display the pin-to-pin connectivity results as follow.
You can check each pin-to-pin test result by pressing the UP or DOWN buttons and press ENTER to select the pin
number or press BACK to return to main menu.
The
indicates there are further pages of test results.
If no cables are connected to the tester, it will display the test results as follow.
Tester Power Off
01 04 06 07
08 09 15 01
A01 – B01 A02 – B02
A03 – B03 A04 – B04
A01 B01 A02 B02
A03 B03 A04 B04
User Manual
QuickTest
The Cable Tester Pro’s QuickTest function allows you to test a large number of cables in a short time.
Select QuickTest in the main menu then press ENTER.
Select Standard Detail to create the pin-to-pin connection to be tested. The ‘Standard’ will be compared to the other
cables and determine whether these cables are good or bad. The ‘Standard’ cable is automatically saved as the
‘Standard Record’.
V = Defined standard
X = Standard needs defining
Once the ‘Standard’ is defined select QuickTest.
If the cable’s pin-to-pin connectivity matches the standard, the Cable Tester Pro will show PASS, and ‘beep’ once.
Press the DOWN button to browse the detailed pin-to-pin connection results.
If the cable’s pin-to-pin connectivity DOES NOT MATCH, the
Cable Tester Pro will show FAIL, and ‘beep’ once.
Press the DOWN button to browse the detailed pin-to-pin connection results.
Browse
Select Browse mode from the main menu to review or delete previous tests. Press ENTER to review test records or
DELETE while displaying the test record.
To review a saved record, select the Browse function in the main menu. Press the UP or DOWN buttons to select the
desired record and press ENTER to display the test data.
After pressing the DELETE button, the tester will display two options in the menu: DeleteOne or DeleteAll.
QuickTest
PASS
A01 – B01 A02 – B02
A03 – B03 A04 – B04
FAIL
A01 – B03 A02 – B06
A03 – B01 A04 – B07
Saved No. 003 ok
DeleteOne
DeleteAll
User Manual
When deleting a specific record select DeleteOne and press the UP or DOWN buttons to choose the record you want
to delete. Press ENTER to delete the record. (Note: pressing ENTER again will delete the previous saved record.) To
delete all records select DeleteAll. Press BACK to return to the main menu.
To upload test data to a computer, both the Cable Tester Pro driver and software (included) must be installed.
Settings
In the Settings menu, you can choose to turn on/off the buzzer, test details or the auto off function.
V = On
X = Off
You can also review the firmware information with the About option.
Driver Installation
Before Installation uninstall any TEST–i_Series drivers via ‘Add or Remove Programs’ in the Control Panel.
How to Install
Windows XP/Vista/7 (only).
Setup should start automatically after inserting the CD in the CD-ROM. If this process does not start after several
seconds double-click My Computer on your desktop (or click the Start button, and click My Computer) right–click your
CD drive and then click Auto Play.
Click the setup.exe > Select your Operating System > Select a Destination Folder.
Note: If an older version of the driver is detected the program will ask you to remove it before installing the new one.
Click Yes to uninstall the existing driver and continue.
Note: If an unsigned driver installation warning is displayed, ignore this dialogue and click Continue.
Once installation is complete Reboot your computer.
A Cable Tester Pro icon will now display on the Desktop.
User Manual
Cable Tester Software
Connect the
Cable Tester Pro to your computer via the USB cable and click the Cable Tester Pro icon on the Desktop.
Test–i_Series table will open. The Toolbar includes Open, Save, Print, Upload, About and Exit. Test results include
ID, Pin and Pin State. Make sure the device is connected properly and all connections are secure.
Toolbar Description
Open the file that has been saved.
Save test result.
Print test result.
Upload data that has been saved on the Cable Tester Pro.
Click the Upload Data button to upload data. Click Refresh Dev to refresh the device.
Problems
(X) (Y) - Shows the number of the referring pin.
A (X) - B (X) - Cable is Good.
A (X) - No connection/Broken Circuit.
A (X) - A (Y) - B (X) - B (Y) - The connection is Shorted/ Cable Defective.
A (X) - B (Y) - The connection is Miswired/ Cable Defective.
CE & Recycling
CE Certification
This equipment complies with the requireme
requirement of Council Directive 89/336/EEC
compatibility.
WEEE (Waste of Electrical
Recycling of Electronic Pro
United Kingdom
In 2006 the European Union introduced re
equipment. It is no longer allowable to simpl
recycling process.
Each individual EU member state has imple
your national law when you want to dispose
WEEE recycling agency.
Germany
Die Europäische Union hat mit der WEEE D
und Elektronikp
rodukten geschaffen. Diese
deutsches Recht umgesetzt. Dieses Gese
Elektro- und Elektronikgerät
en über die H
Sammelstellen zugeführt werden! Dort werd
übernimmt die Gesamtheit der Geräteherste
France
En 2006, l'union Européenne a introduit la
électronique.
Chaque Etat membre de l’ Union Européenn
différentes. Veuillez suivre le décret d’applic
pays.
Italy
Nel 2006 l’unione europea ha introdotto reg
è più consentito semplicemente gettare que
direttive WEEE in leggi statali in varie mis
elettrico o elettronico.
Per ulteriori dettagli fare riferimento alla dire
ents relating to electromagnetic com
patibility, IEC/EN61
EC on the approximation of the laws of the Member Stat
al and Electronic Equipment),
roducts
regulations (WEEE) for the collection and recycling of
electronic equipment. Inst
plemented the WEEE regulations into national law in sl
se of a
ny electrical or electronic products. More details c
Direktive umfassende Regelungen für die Verschrottu
e wurden von der Bundesregierung im Elektro
-
und Ele
setz verbietet vom 24.März 2006 an das Entsorgen
Hausmülltonne! Diese Geräte müssen den lokalen
erden sie kostenlos entgegen genommen. Die Kosten f
telle
r.
la nouvelle réglementation (DEEE) pour le recyclage de
nne a mis en applicat
ion la nouvelle réglementation DEE
lication correspondant à l’élimination des déchets électri
egolamentazioni (WEEE) per la raccolta e il riciclo di ap
p
ueste apparecchiature, devono essere riciclate. Ogni sta
isure. Fare riferimento alle leggi del propr
io Stato qua
irettiva WEEE sul riciclaggio del proprio Stato.
61000
-4-2/3 the essential protection
tates relating to electromagnetic
of all waste electrical and electro
nic
stead, these products must enter the
slightly different ways. Please fol
low
s can be obtained from your national
tung und das Recycling von Elektro
-
Elektronikgerätegesetz
– ElektroG in
n von entsprechenden, auch alten,
n Sammelsystemen bzw. örtlichen
für den weiteren Recyclingprozess
e tout équipement électrique e
t
EEE
de manières légèrement
triques ou électroniques d
e votre
parecchi elettrici ed elettronici. Non
tato membro dell’ EU ha tramuta
to le
uando si dispone di un apparecchio
LINDY No. 43069
1st Edition Jan 2012
www.lindy.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Lindy Test-i Pro 43069 Manuale utente

Lindy
Marca
Lindy
Modello
Test-i Pro 43069
Categoria
Tester di rete via cavo
Tipo
Manuale utente
Scarica PDF
rapporto

in altre lingue

Documenti correlati

Altri documenti