Vermeiren VERSO Manuale utente

User manual

M A N U E L D ' U T I L I S A T I O N

G E B R U I K S A A N W I J Z I N G

G E B R A U C H S A N W E I S U N G

M A N U A L E D I I S T R U Z I O N I

M A N U A L D E I N S T R U C C I O N E S

I N S T R U K C J A O B S

Ł

U G I

N Á V O D K O B S L U Z E

Verso

Instrukcje dla wyspecjalizowanego

Alle rechten, inclusief vertaling, voorbehouden.

Alle Rechte, auch an der Übersetzung, vorbehalten.

traducción.

Wszelkie prawa zastrzeżone, łącznie z tłumaczeniem.

Všechna práva vyhrazena, včetně překladu.

EN

Instructions for specialist dealer

This instruction manual is part and parcel of the

product and must accompany every product

sold.

Version: B, 2023-06

FR

Instructions pour les distributeurs

Ce manuel d'instructions fait partie du produit et

doit accompagner chaque produit vendu.

Version : B, 2023-06

NL

Instructies voor de vakhandelaar

Deze handleiding is deel van het product en

dient bij iedere product te worden geleverd.

Versie: B, 2023-06

DE

Hinweise für den Fachhändler

Diese Gebrauchsanweisung ist Bestand-teil des

Produkts und ist bei jeder Produkts

auszuhändigen.

Version: B, 2023-06

IT

Istruzioni per il rivenditore

Il presente Manuale di istruzioni è parte

integrante del prodotto e deve essere fornito

assieme alla prodotto.

Versione: B, 2023-06

ES

Instrucciones destinadas a los distribuidores

especializados

El presente manual de instrucciones es parte

integrante del producto y se debe adjuntar a

todas las producto que se vendan.

Versión: B, 2023-06

PL

sprzedawcy

Niniejsza instrukcja obsługi jest nieodłączną

częścią produktu i musi być dołączona do

każdego sprzedawanego produktu.

Wersja: B, 2023-06

CS

Pokyny pro specializovaného prodejce

Tento návod k obsluze je součástí dodávky a

musí být součástí každého prodaného

produktu.

Verze: B, 2023-06

Basic UDI: 5415174VersoG7

Multi version: A, 2023-06

Verso

2023-06

Content

1

EN

NL

Content

Content ....................................................................................................................... 1

Preface........................................................................................................................ 2

1 Your product .................................................................................................. 3

1.1 Options .......................................................................................................... 3

2 Before use ..................................................................................................... 4

2.1 Intended use ................................................................................................. 4

2.2 General safety instructions ............................................................................ 4

2.3 Symbols on the wheelchair ........................................................................... 5

2.4 Transport ....................................................................................................... 5

2.5 Assembly/Disassembly ................................................................................. 6

2.6 First use and storage .................................................................................... 8

3 Using your wheelchair .................................................................................. 9

3.1 First ride ........................................................................................................ 9

3.2 Driving outdoors ............................................................................................ 9

3.3 Operating console ....................................................................................... 10

3.4 Brake and free-wheel lever ......................................................................... 12

3.5 Moving to/from wheelchair .......................................................................... 12

3.6 Comfort adjustments ................................................................................... 13

3.7 Battery status and charging ........................................................................ 15

3.8 Switching the electric device On/Off ............................................................ 16

3.9 Mounting / removing battery ........................................................................ 16

4 Maintenance ................................................................................................ 17

4.1 Time of maintenance ................................................................................... 17

4.2 Instructions for maintenance ....................................................................... 17

4.3 Troubleshooting .......................................................................................... 18

4.4 Expected lifespan ........................................................................................ 18

4.5 Reuse .......................................................................................................... 18

4.6 End of use ................................................................................................... 19

5 Troubleshooting .......................................................................................... 20

6 Technical specifications ............................................................................. 21

Verso

2023-06

Preface

2

EN

NL

Preface

Congratulations! You are now owner of a Vermeiren wheelchair!

This wheelchair is made by qualified and committed personnel. It is designed and produced

according to high quality standards guarded by Vermeiren.

Thanks for your trust in the products of Vermeiren. To support you on the use of this wheelchair

and its operating options, this manual is offered. Please read it carefully; it will help you to get

familiar with the operation, capabilities and limitations of your wheelchair.

If you still have questions after reading this manual, do not hesitate to contact your specialist

dealer. He/she will be glad to help you on this subject.

Important note

To ensure your safety, and to prolong the lifetime of your product, please take good care of it and

have it checked and serviced on a regular basis.

This manual reflects the latest product developments. Vermeiren has the right to implement

changes to this type of product without being imposed to any obligation to adapt or replace similar

products previously delivered.

Pictures are used to clarify the instructions in this manual. Details of the depicted product may

deviate from your product.

Information available

On our website http://www.vermeiren.com/ you will always find the most recent version of

following information. Please consult this website regularly for possible updates.

Visually impaired people can download the electronic version of this manual and have it read out

by means of a text-to-speech software application.

This user manual

For user and specialist dealer

Installation instructions (Instructions for detail adjustments and (dis)assembly)

For specialist dealer

Service manual for wheelchairs

For specialist dealer

EC declaration of conformity

Verso

2023-06

Your product

3

EN

NL

1 Your product

1. Backrest

2. Operating console

3. Armrest

4. Seat

5. Footrest

6.

Footplate

7. Front wheels

8. Rear wheels / Driving wheels with motors

9. Battery

10. Cross

11. Identification plate

1.1 Options

 Contact your specialist dealer about options. He will gladly advise you.

1

2

3

4

5

6

9

7

10

8

11

Verso

2023-06

Before use

4

EN

NL

2 Before use

2.1 Intended use

In this paragraph a brief description of the intended use of your wheelchair is given. Additionally,

relevant warnings are added to the instructions in the other paragraphs. In this way we would like

to make you aware of the possible misuse that may appear.

 This wheelchair is suitable for indoor and outdoor use.

 This wheelchair is designed and produced solely to transport/transfer one (1) person with a

maximum weight of 130kg. It is not designed for transportation of goods or objects, nor for any

use other than previously described.

 This wheelchair can be operated by the user sitting in the wheelchair, or it can be pushed by

an attendant. You should NOT use this wheelchair without attendant if you suffer from physical

or mental impairments that may put you, or other people, in danger when driving the

wheelchair. For this reason, consult your doctor first and make sure that your specialist dealer

is informed about his advice.

 Only use accessories and spare parts approved by Vermeiren.

 Please read all technical details and limits of your wheelchair in chapter 6.

 The warranty on this product is based on normal use and maintenance as described in this

manual. Damage to your product caused by improper use or lack of maintenance will cause

the warranty to lapse.

2.2 General safety instructions

Risk of injuries and/or damage

Please read and follow the instructions in this manual. Oth

erwise you may get injured or your

wheelchair may get damaged.

Keep the following general warnings in mind during use:

 Do not use your wheelchair if you are under influence of alcohol, medicines or other

substances that may influence your driving abilities.

 Be aware that some parts of your wheelchair may get very hot or cold due to ambient

temperature, solar radiation, heating devices or due to the motor drive during the ride. Be

careful when touching. Wear protective clothing if the weather is cold. After a ride, wait until

the wheelchair/motor has cooled down.

 Before switching the wheelchair on, be aware of the environment/situation in which you are

located. Adjust your speed to this before driving off. We advise you to use the slowest speed

setting to drive indoors. For outdoor driving you can adjust the speed to a suitable speed at

which you feel comfortable and safe.

 ALWAYS keep in mind that your wheelchair may stop suddenly due to a discharged battery

or a protection that prevents your wheelchair from further damage. Also check the possible

causes mentioned in § 4.3. Use your safety belt to prevent injuries.

 Your wheelchair has been tested for electromagnetic compatibility and complies with the

standard, see chapter 6. Nevertheless, sources of electromagnetic fields may influence the

driving performance of your wheelchair, such as the fields of mobile phones, power

generators or high-power energy sources. On the other hand, the electronics of your

wheelchair can affect other electronic appliances too, such as alarm systems of shops and

automatic doors. We therefore advise you to check your wheelchair regularly for damage and

wear, since these may enlarge the interference (see also chapter 4).

 Only drive on flat surfaces where both driving wheels touch the ground and where there is

sufficient contact to operate the wheelchair safely.

CAUTION

Verso

2023-06

Before use

5

EN

NL

 Alterations or substitutions should not be made to the wheelchair securement points or to

structural and frame parts or components without consulting the wheelchair manufacturer.

 Make sure that your hands, clothes, belts, buckles or jewellery don’t get caught by wheels or

other moving parts during use.

Be aware that your wheelchair may interfere with some types of anti-theft systems, depending on

the settings used. This may cause the shop's alarm to go off.

In case a serious incident has occurred involving your product, notify Vermeiren or your specialist

dealer as well as the competent authority in your country.

2.3 Symbols on the wheelchair

The symbols in following list are applicable to your wheelchair. Symbols can be found in the

relevant ISO standard (ISO 7000, ISO 7001 and IEC 417).

Maximum weight of the user in kg

Indoor/outdoor use (battery charger excluded)

Indoor use only (battery charger)

Maximum safe slope in ° (degrees).

Maximum speed

Type designation

Risk of entrapment

2.4 Transport

Risk of damage

Take action to protect the wheelchair from being damaged during transport.

2.4.1 Moving out of the way

Use the operating console to drive the wheelchair to its destination.

Otherwise, put the wheelchair in free-wheel mode (see §3.4) and use the push bar to move it.

2.4.2 Transport by aircraft

When transporting the wheelchair by aircraft, lock

and disconnect the battery before handing the

wheelchair over to airport personnel (see §3.9 and

§3.8). The battery can remain in the wheelchair.

Consult your airline for the correct handling

procedure.

CAUTION

Verso

2023-06

Before use

6

EN

NL

2.4.3 Transport by vehicle, as luggage

The best way to transport your electric wheelchair in the car is to drive it by using ramps. If you

are not experienced to drive the electric wheelchair using ramps, you can put the wheelchair in

neutral mode and push the wheelchair in the car using ramps. If necessary, disassemble the

wheelchair.

1. As the wheelchair user, transfer to a car seat, see §3.5.

2. Remove all moveable parts prior to transport (footrests, arm supports, etc.).

3. Store moveable parts safely behind the passenger seat or in the luggage compartment.

4. Drive or push the electric wheelchair in the car using ramps, or lift the wheelchair in the car

with the help of 2 persons by grasping the fixed parts of the frames.

5. Attach the solid parts of the frame securely to the vehicle.

6. Place the wheelchair in drive mode (engaging the parking brakes) and check that the operating

console is switched off.

2.5 Assembly/Disassembly

Risk of injuries



Make sure that your fingers, clothes, buckles won’t get trapped during (dis)assembly.

Your dealer delivers the wheelchair fully assembled and explains the various operating elements

and their use. We also provide a further, detailed explanation of the different parts here for

transport purposes

To assemble the powered wheelchair:

1. Unfold the seating frame (A).

2. Place the seating frame on the front wheels and the rear support wheels.

3. Place the drive train (B) unit behind the seating frame.

4. Unscrew the star knob (1) and remove the operating console (2) from the drive train unit.

Place the console in a temporary safe place, e.g. place it over the backrest.

5. Place the hooks of the seat frame (3) on the rods (4) of the drive train unit.

6. Push the seating frame down until an audible click is heard and the frame is securely

attached to the drive train unit, both left and right. Check that the hooks (8) are locked in

downward position.

If the seat frame does not click automatically, place the frame on the drive train unit and

push the hooks (8) down manually.

7. Mount the arm supports (§3.6.2).

8. Mount the footrests (§3.6.1).

9. Slide the operating console into the support on the armrest (5). Tighten the star knob (6)

and secure the cable with the clamps (7).

To disassemble the powered wheelchair:

1. Release the cable from the clamps on the armrest. Loosen the star knob (6) on the

operating console support and slide the console out. Place the console in a temporary safe

place.

2. Pull the hooks (8) on both sides of the lower frame upwards. The drive train unit is now

released from the frame and will tilt backwards onto its support wheels.

3. Lift the seating frame up and away from the drive train unit.

4. Remove the arm supports.

5. Remove the footrests.

6. Fold the seating frame.

7. Place the operating console (2) into the designated support on the drive train unit and

tighten the star knob (1).

CAUTION

Verso

2023-06

Before use

7

EN

NL

A

B

1

2

3

5

6

4

7

8

Verso

2023-06

Before use

8

EN

NL

2.6 First use and storage

Risk of battery damage

 Never completely discharge the battery.



Do not interrupt the charging cycle; only disconnect the battery charger when the battery is

fully charged.



Make sure that your wheelchair is stored dry to prevent mould from growing and the upholstery

from being damaged.



Check the technical details for

storage, see chapter

6

.

Ensure that the battery has been fully charged before using your wheelchair, ask your dealer if

this has already been done or not. To charge, follow the charging instructions in §3.7.

CAUTION

Verso

2023-06

Using your wheelchair

9

EN

NL

3 Using your wheelchair

Risk of injuries



First read previous chapters and inform yourself about the intended use. Do NOT use your

wheelchair unless you have read and fully understood all instructions.

 Also read the instructions in the operator console manual and battery charger manual!

 In case o

f doubts or questions, do not hesitate to contact your local specialist dealer, your care

provider or technical adviser to help you with this.

3.1 First ride

Risk of injuries and damage

 Always keep the swing range of footrest and operating console in

mind to prevent bystanders

from being injured or objects from being damaged.



Always unplug the battery charger from the wheelchair before starting to drive.



Make sure that you are familiar with the operation of your wheelchair before using it in

crowded and possibly dangerous places. First exercise at a specious, open area with

little bystanders.



Investigate the effects of shifting the centre of gravity on the behaviour of the wheelchair,

for example on up or down gradients, on laterally

sloping ground, or when overcoming

obstacles. Obtain support from an attendant.

 The surface of the controller gets slightly warm during use.



While driving backwards, the speed is reduced.

1. Make sure that:

 the wheelchair is on a flat surface;

 the battery is fully charged, see § 3.7;

 The motor is coupled, see § 3.4;

 the wheelchair is adapted to your needs and comfort, see §3.6;

 you have the proper sitting position, see § 3.5.

2. Follow the instructions in the operating console manual.

3. Switch on your wheelchair.

4. Turn the speed control to the lowest speed setting.

5. Exercise how to drive and make adjustments to the wheelchair.

6. If you feel confident enough, you can try to drive at higher speed.

7. Now try to turn, in forward and backward direction. Repeat this a few times.

8. Make sure that your wheelchair stands stable, when ending the ride.

9. Switch off your wheelchair.

3.2 Driving outdoors

Risk of accident - Adjust your driving behaviour and speed.



Take the local road traffic law into consideration; it may differ per country. This counts for

driving on pavements, unpaved roads or paved roadways.

 Do not drive on roads with heavy traffic.



Take the weather conditions into consideration. Avoid driving by moist weather, extreme heat,

snow, black ice, freezing temperatures; see technical specifications in chapter 6.



Make sure that you are well visible, also during daylight hours, by using fluorescent clothing

and/or by using own lighting at the front and rear side of the wheelchair.

WARNING

CAUTION

WARNING

Verso

2023-06

Using your wheelchair

10

EN

NL

 Be aware of other road users to whom your wheelchair may be an

obstacle. Pay special

attention during turning and reversing. If you are not acquainted with how to drive backwards,

first practice in an open area. Indicate the direction you are intending to go before turning.

 Try to drive straight in small passages to prevent getting trapped.



Keep the braking distance in mind. Be aware that the braking distance depends on speed,

surface, weather conditions, slope and weight of the user.

3.2.1 Cope with slopes, kerbs, obstacles or ramps

Risk of injuries by unexpected movement

 Use a restraining safety belt to secure yourself sitting in the wheelchair.



Pay attention if the road is sandy, has soft ground, holes or gaps that may cause entrapment

of the wheels and/or decreasing of the traction of the driving wheels.



Do NOT drive on slopes, obstacles, steps or kerbs larger than the size described in the

technical specifications in chapter 6.

 Always approach a kerb from the front.

 Do not put your wheelchair in free-wheel mode on a slope. The wheelchair may start movin

g,

causing injuries to you or bystanders.

 Do not use your wheelchair on an escalator or stairs.

 Only use ramps approved by Vermeiren and do not exceed their maximum load.



To safely overcome obstacles or slopes, put the wheelchair in its most upright sittin

g position.

Risk of damage



Always park your electric wheelchair on horizontal flat surfaces and on sites that are easily

accessible.

 If necessary, take a short run-

up to speed up the wheelchair to mount a slope, obstacle, kerb

or ramp. Prevent that you or your wheelchair has to cope with a large recoil.



Make sure that the wheelchair does not touch the ground or ramp due to the inclination of the

wheelchair.



Be aware that the braking distance on downhill slopes can be significantly larger than on level

ground.

Procedure

 Start your drive according to the instructions in § 3.1, step 1.

 To move the wheelchair up or down stairs/steps, use lifting equipment or a ramp. If these

are not available, it can be lifted manually by at least two persons, grasping the frame firmly

with both hands. Do not use the backrest, footplate(s), armrests, or wheels to grasp the

wheelchair.

 To cope with obstacles or inclinations:

1. Adjust the wheelchair to its most stable position, see § 3.5.

2. Drive as slow as possible to cope with the obstacle or inclination.

3.3 Operating console

Put the joystick in the neutral (central) position before pressing the on/off button, otherwise

the electronics will be

blocked. To release this block, switch the operating console off and

on again.

CAUTION

When you stop on a slope, the brake will work automatically to prevent the wheelchair from

running forward or backward.

Verso

2023-06

Using your wheelchair

11

EN

NL

1. ON/OFF button

2. Battery charge indicator

3. Speed indicator

4. Horn button

5. Speed decrease button

6. Speed increase button

7. Joystick

3.3.1 Technical protections

For your own safety, and to prevent that the wheelchair gets damaged, movements are monitored

by the electronics. This may result in speed decrease or complete stop.

 To avoid accidental battery run down, your wheelchair is equipped with an automatic power

shutdown system. This system switches off the operating console automatically when it is not

operated for a while. If this occurs, simply switch your console back on.

 Make sure that the free-wheel lever is in braking position BEFORE switching the wheelchair

ON. Electromagnetic brakes do NOT function if the wheelchair is in free-wheel mode. This is

indicated on the operating console. Driving is not possible.

3.3.2 Driving

1. Press the ON/OFF button (1) to switch on the wheelchair.

2. If the lights of the battery charge indicator (2) and speed indicator (3) go on, the wheelchair

is powered and ready to go.

3. Check the battery status indicator. Charge the battery if necessary (see §3.7).

4. Adjust the driving speed: decrease the speed with the speed decrease button (5), or increase

the speed with the speed increase button (6).

5. Start moving the wheelchair by operating the joystick (7) slowly forwards/backwards.

6. The speed will increase when you push the joystick further out of the centre.

7. To turn left or right, push the joystick to the left or right.

8. To brake, move the joystick to neutral position.

9. Press the horn button (4) to alert other road users if necessary.

10. After arrival, check the battery status and press the ON/OFF button to switch off the

wheelchair.

11. Charge the battery if necessary.

3.3.3 Operation console lock

The control system can be locked to prevent unauthorized use.

To lock the powerchair:

1. While the control system is switched on, press and hold the On/Off button.

2. After 1 second the control system will beep. Now release the On/Off button.

3. Deflect the joystick forwards until the control system beeps.

4. Deflect the joystick in reverse until the control system beeps.

5. Release the joystick, there will be a long beep.

6. The powerchair is now locked.

1

2

3

4

5

6

7

Verso

2023-06

Using your wheelchair

12

EN

NL

To unlock the powerchair:

1. Use the On/Off button to switch the control system on. The maximum speed / profile

indicator will be rippling up and down.

2. Deflect the joystick forwards until the control system beeps.

3. Deflect the joystick in reverse until the control system beeps.

4. Release the joystick, there will be a long beep.

5. The powerchair is now unlocked.

3.4 Brake and free-wheel lever

Risk of injuries or damage

 Only operate the free-wheel lever when your

wheelchair is turned OFF. An attendant should

operate the free-wheel lever. NEVER operate it from sitting position.



Do not use the free

-

wheel mode on slopes and inclinations

.

Make sure that the free-wheel lever is in its braking position BEFORE switching the

wheelchair ON. Electromagnetic brakes do NOT function if the wheelchair is in free

-wheel

mode. This is indicated on the operating console. Driving is not possible.

Your wheelchair is equipped with electromagnetic brakes. The working of the brakes depends on

the position of the free-wheel lever (1).

The EM brakes function automatically, only if free-

wheel lever (1) is in braking position. In this situation,

the brakes start braking if:

 the wheelchair is OFF;

 the wheelchair is ON and the joystick is released.

Releasing the joystick makes the wheelchair stop

gently and activates the brakes.

Operation of free-wheel lever:

 Turn levers UP to put the wheelchair in free-

wheel mode. Now, the motor is disconnected.

The wheelchair can be moved manually.

 Turn levers DOWN to connect the motor to the

drive. This should be done before starting the

wheelchair.

3.5 Moving to/from wheelchair

Risk of injuries or damage

 In case you cannot perform the transfer in a safe manner, ask someone to assist you.

 Do not stand on the footplate(s) during transfer into or out of the wheelchair.

Transfer

1. Position the wheelchair as close as possible to you when sitting in your chair, couch, seat or

bed.

2. Apply the brakes by turning the free-wheel lever to braking position, see § 3.4.

3. Fold the footplate(s) upwards to prevent standing on them.

4. If necessary, remove one armrest to make room, see § 3.6.2.

5. Transfer to/from the wheelchair using the strength of your arms or with the help of attendant(s)

or lifting equipment.

CAUTION

1

Verso

2023-06

Using your wheelchair

13

EN

NL

Sitting in the wheelchair

1. Sit down on the seat with your lower back against the backrest.

2. Turn the footplate(s) down and put your feet on the footplates.

3. Replace the armrest, if applicable.

4. Make sure that your upper legs are horizontal and that your feet are in a comfortable position.

Adjust if necessary.

5. Make sure that your arms are bent and are resting comfortably on the arm pads. Adjust if

necessary.

Adjusting to stable position

For transport purposes and when you need to negotiate obstacles, the wheelchair must be

adjusted to maximise its stability:

 Backrest upright

 Footplate folded up

3.6 Comfort adjustments

Risk of injuries or damage

 The following comfort adjustments can be done by

the attendant or caretaker. All other

adjustments are done by your specialist dealer according to the installation instructions, see

preface.



Make sure that your fingers, clothes, buckles don’t get trapped during adjustment.

3.6.1 Mounting or removing the footrests

Mounting the footrests is done as follows:

1. Hold the footrest sideways at the outside of the

wheelchair’s frame and mount the tube hood  into the

frame.

2. Swing the footrest inwards until it clicks in position.

3. Swing the footplate downwards.

To take off the footrests:

1. Pull lever .

2. Swing the footrest to the outside of the wheelchair until

it comes loose from the guidance.

3. Pull the footrest from the tube hood .

CAUTION

Verso

2023-06

Using your wheelchair

14

EN

NL

3.6.2 Mounting or removing the armrests

The armrests of the wheelchair can be mounted by following

instructions.

1. Mount the armrest  in the armrest support  until the

screw  fits in the sleeve .

2. Make sure the armrest  is firmly fixated.

To remove the armrest:

1. Grasp the arm pad and pull the armrest gently out of the

armrest support.

3.6.3 Backrest height

The backrest height can be adjusted into 5 positions.

1. Remove the star knob (1).

2. Slide the backrest upholstery up/down to the desired height.

Make sure that the hole for the star knob in the frame tube

aligns with one of the holes in the upholstery.

3. Replace the star knob and retighten.

3.6.4 Backrest support

The backrest of the wheelchair has a suspension system with adjustable Velcro straps, to adjust

the flexibility of the backrest.

1. Pull the backrest cushion from the Velcro straps of the

backrest.

2. Loosen the Velcro straps.

3. Pull the respective strap to the desired position. The

tension of the individual belts can be varied and the

desired support of the back can be set.

4. Place the back cushion back over the backrest starting

at the front and ending at the back.

5. Secure the Velcro connections by pressing the cushion against the backrest with your hand.

6. Make sure that all straps are secured with Velcro.

3.6.5 Push handle height

The push handles can be adjusted over a distance of 60 mm:

1. Loosen the star knob (1) .

2. Move the handgrip up/down to the desired height.

3. Retighten the star knob (1) .

4. Repeat for the other handle. Make sure that both handles are

firmly secured.

1

Verso

2023-06

Using your wheelchair

15

EN

NL

3.7 Battery status and charging

Risk of injuries and damage due to fire



Only use the battery charger delivered with the wheelchair. The use of any other charger may

be dangerous (fire hazard).



The battery charger is only intended to charge the batteries delivered with the wheelchair, not

to charge any other batteries.

 Do not

adapt any of the delivered parts, like cables, plugs or battery charger. Never open or

change the battery or the connection points.



Protect the battery and battery charger against flames, high and low temperatures (see chapter

6

), moisture, sunshine, severe shocks (for example dropping). Do NOT use the battery if this

has been the case.

 Charge the battery with the battery charger, indoors, in a well-ventilated area,

out of children's

reach.

Risk of damage

 Battery self-

discharge and the quiescent current of the connected users will drain the battery

charge slowly. The battery may be irreversibly damaged if the battery is fully discharged.

Therefore, make sure that the battery is charged on time (see 3.7).

 Read the storage and maintenance instructions in chapter 4 and technical details in chapter 6

.

 Do not charge batteries below 0°C. Move the battery to a warmer place and start charging.

 Keep the connection point for the battery charger free of dust and other contamination.



In case of any problems whereby the battery cannot be charged according to following

instructions, please contact your specialist

dealer.

For all information on battery status indication, please read §3.7.

It is recommended to unplug the battery charger from the mains

when not in use. This is to

prevent unnecessary energy consumption.

Always check the battery for damage before charging. Press the charge indicator button for 2

seconds to switch on the battery. When no LED of the charge indicator lights up, the battery may

be damaged. When at least one, but not all LEDs of the charge indicator, is lit, then fully charge

the battery pack before using for the first time.

Do not charge or use a damaged battery, contact your specialist dealer.

To ensure full battery capacity, completely charge the battery with the

charger before using it for the first time. The battery can be recharged at

any time on the wheelchair or while removed from the wheelchair.

Instructions to charge the battery:

1. Switch the battery off.

2. If desired, remove the battery from the battery housing and prevent dirt

or fluids from entering the charging socket.

3. Connect the charger plug to the battery pack .

4. Connect the charger mains plug into the wall socket.

5. The LED indicator on the battery charger will show the status of the charging process:

 Red - Charging

 Green - Standby / Fully Charged

6. Once the battery is fully charged, remove the battery charger from the wall socket and the

battery.

WARNING

CAUTION

1

Verso

2023-06

Using your wheelchair

16

EN

NL

3.7.1 Battery charge indicator

There are two battery charge indicators:

On the battery pack:

1. Press button  on the battery pack.

2. The LED's of the battery charge indicator  will indicate the

battery charge level.

Operator console:

When the electric system is switched on, the battery indicator (2,

§3.3) will indicate the battery charge level.

 All LEDs on: battery fully charged.

 Only red LED on or blinking: immediately recharge battery.

Because of the wiring, both indications can deviate a little bit. In

that case, take the worst charge level indication.

3.8 Switching the electric device On/Off

Press the on/off switch on the side of the battery.

3.9 Mounting / removing battery

The battery can be removed for easy charging away from the wheelchair.

To mount the battery:

1. Place the key  and turn the key towards the

unlock symbol.

2. Place the battery in the battery housing as far as

possible. There is only 1 possible way to insert

the battery.

3. Turn the key  to the lock symbol.

4. Make sure that the battery is fixed well.

5. Remove the key . (Never remove the key while

riding).

To remove the battery:

1. Place the key .

2. Turn the key  to the unlock symbol.

3. Pull the battery gently out of the battery housing.

1

2

1

Unlock

Lock

Verso

2023-06

Maintenance

17

EN

NL

4 Maintenance

4.1 Time of maintenance

Risk of injuries and damage

Repairs and replacements may only be undertaken by trained persons and only genuine

replacement parts of

Vermeiren should be used.

The last page of this manual contains a registration form for the specialist dealer to record

each service.

The service frequency depends on the frequency and intensity of use. Contact your dealer to

agree to a common timetable for inspection/maintenance/repair.

Read the user instructions of the applied battery charger regarding maintenance.

For the maintenance manual, refer to the Vermeiren website: www.vermeiren.com.

Before each use

Inspect the following points:

 All parts: present, undamaged and unworn.

 All parts: clean, see § 4.2.2.

 Wheels, seat, arm rests, footrests and headrest (if applied): well secured.

 Battery status: charge the battery when necessary, see §3.7.

 Operating console, battery, power module, motors, battery charger, lights and relevant

cables: no damage such as wires that have become frayed, broken or exposed.

 Condition of wheels/tyres, see § 4.2.1.

 Condition of frame parts: no deformation, instability, weakness or loose connections.

 Seat, backrest, arm pads, calf pads and head rest (if applied): no excessive wear (like

dented spots, damage or tears).

Contact your specialist dealer for possible repairs or part replacements.

Every month

If your wheelchair is stored for a longer period, you still need to charge the batteries every month.

It is also possible to keep the battery charger connected to the battery and the mains during this

period. For more information, see § 3.7.

Yearly or more often

Have your wheelchair inspected and serviced by your specialist dealer, at least once a year, or

more often. The minimum maintenance frequency depends on use and should therefore be

commonly agreed upon with your specialist dealer.

If stored

Make sure that your wheelchair is stored in a dry environment to prevent mould from growing,

or the upholstery from being damaged.

4.2 Instructions for maintenance

4.2.1 Wheels and tyres

Proper working of the brakes depends on the state of the tyres, that can change due to wear

and contamination (water, oil,

mud, …).

 Keep your wheels free of wires, hair, sand and fibres.

 Check the profile of the tyres. If the tread depth is less than 1 mm, the tyres need to be

replaced. Contact your specialist dealer for this matter.

CAUTION

Verso

2023-06

Maintenance

18

EN

NL

4.2.2 Cleaning

Risk of damage by moisture

 Keep the operating console clean and protect it from water and rain.



Never use a hose or high

-

pressure cleaner to clean the wheelchair.

Wipe all rigid parts of the wheelchair with a damp cloth (not drenched). If necessary, use a mild

soap, suitable for varnishes and synthetics.

The upholstery can be cleaned with lukewarm water and a mild soap. Do not use abrasive

cleaning agents to clean.

Keep the ventilation openings of the battery charger clean and free of accumulated dust. Blow

away the dust and clean the battery charger enclosure with a slightly moistened cloth, if required.

4.2.3 Disinfection

Risk of damage

Disinfections may only be undertaken by trained persons. Consult your specialist dealer.

4.3 Troubleshooting

Even if you use your wheelchair properly, a technical problem may occur despite this.

In this case, contact your local specialist dealer.

Risk of injuries and damage to the wheelchair

 NEVER attempt to repair your wheelchair yourself.



For failures in the operating console you need to contact your specialist dealer.

He/She

will decide if the console needs to be reprogrammed.

In case of failure, a fault code is displayed on the operating console, see §5.

The following symptoms may indicate a serious problem. Therefore, always contact your

specialist dealer if you spot any of the following deviations:

 Strange sound;

 Frayed/damaged wiring harnesses;

 Cracked or broken connectors;

 Uneven tread wear at one of the tyres;

 Jerky movements;

 Wheelchair deflects to one side;

 Damaged or broken wheel assemblies;

 Wheelchair does not switch on (blown fuse);

 Wheelchair is powered but does not move, see 3.4.

4.4 Expected lifespan

The average lifespan of your wheelchair is 5 years. Depending on the frequency of use, driving

circumstances and maintenance, the lifespan of your wheelchair will increase or decrease.

4.5 Reuse

Before reuse by another person, have the wheelchair disinfected, inspected and serviced

according to the instructions in §4.1 and §4.2.

CAUTION

WARNING

La pagina sta caricando ...

Vermeiren VERSO Manuale utente

Vermeiren VERSO Manuale utente

in altre lingue

Documenti correlati