Vermeiren Inovys II-E Manuale utente

VERMEIREN

Inovys II-E

U S E R M A N U A L

M A N U E L D ' U T I L I S A T I O N

G E B R U I K S A A N W I J Z I N G

G E B R A U C H S A N W E I S U N G

M A N U A L E D I I S T R U Z I O N I

M A N U A L D E I N S T R U C C I O N E S

I N S T R U K C J A O B S

Ł

U G I

N Á V O D K O B S L U Z E

Instrukcje dla wyspecjalizowanego

No part of this manual may be reproduced in any form what so

ever (print, photocopy, microfilm or any other process) without

written permission of the publisher, or processed, duplicated or

distributed by using electronic systems.

Aucune partie de ce manuel ne peut être reproduite, sous

quelque forme que ce soit (imprimée, photocopie, microfilm ou

tout autre procédé) sans l'autorisation écrite du publicateur, ni

traitée, dupliquée ou distribuée à l'aide de systèmes

électroniques.

Alle rechten, inclusief vertaling, voorbehouden.

Niets uit deze handleiding mag geheel of gedeeltelijk in enige

vorm (druk, fotokopie, microfilm of ieder ander procedé) zonder

de schriftelijke toelating van de uitgever worden

gereproduceerd of met behulp van elektronische systemen

worden verwerkt, gekopieerd of verspreid.

Alle Rechte, auch an der Übersetzung, vorbehalten.

Kein Teil der Gebrauchsanweisung darf in irgendeiner Form

(Druck, Fotokopie, Mikrofilm oder einem anderen Verfahren)

ohne schriftliche Genehmigung des Herausgebers

reproduziert oder unter Verwendung elektronischer Systeme

verarbeitet, vervielfältigt oder verbreitet werden.

Il presente manuale non può essere riprodotto, neppure

parzialmente, con alcun mezzo (stampa, fotocopia, microfilm o

altro procedimento) senza l’autorizzazione scritta della casa

produttrice, né elaborato, duplicato o distribuito con l’ausilio di

sistemi elettronici.

traducción.

Se prohíbe la reproducción total o parcial del presente manual

de cualquier forma (impresión, fotocopia, microfilm o cualquier

otro procedimiento), así como la edición, copia o distribución

empleando sistemas electrónicos, sin el permiso escrito del

editor.

Wszelkie prawa zastrzeżone, łącznie z tłumaczeniem.

Żadna część niniejszej instrukcji nie może być powielana w

jakiejkolwiek formie (drukowanej, fotokopii, mikrofilmu ani

innej) bez pisemnej zgody wydawcy, nie może być również

przetwarzana, kopiowana ani rozprowadzana za pomocą

systemów elektronicznych.

Všechna práva vyhrazena, včetně překladu.

Šíření jakékoliv části tohoto katalogu jakýmkoliv způsobem

(tisk, kopie, mikrofilm nebo jiný způsob) bez písemného

souhlasu vydavatele, nebo zpracování, duplikace či distribuce

prostřednictvím elektronických systémů je zakázáno.

EN

Instructions for specialist dealer

This instruction manual is part and parcel of the

product and must accompany every product

sold.

Version: C, 2020-11

FR

Instructions pour les distributeurs

Ce manuel d'instructions fait partie du produit et

doit accompagner chaque produit vendu.

Version : C, 2020-11

NL

Instructies voor de vakhandelaar

Deze handleiding is deel van het product en

dient bij iedere product te worden geleverd.

Versie: C, 2020-11

DE

Hinweise für den Fachhändler

Diese Gebrauchsanweisung ist Bestand-teil des

Produkts und ist bei jeder Produkts

auszuhändigen.

Version: C, 2020-11

IT

Istruzioni per il rivenditore

Il presente Manuale di istruzioni è parte

integrante del prodotto e deve essere fornito

assieme alla prodotto.

Versione: C, 2020-11

ES

Instrucciones destinadas a los distribuidores

especializados

El presente manual de instrucciones es parte

integrante del producto y se debe adjuntar a

todas las producto que se vendan.

Versión: C, 2020-11

PL

sprzedawcy

Niniejsza instrukcja obsługi jest nieodłączną

częścią produktu i musi być dołączona do

każdego sprzedawanego produktu.

Wersja: D, 2020-11

CS

Pokyny pro specializovaného prodejce

Tento návod k obsluze je součástí dodávky a

musí být součástí každého prodaného

produktu.

Verze: C, 2020-11

Basic UDI: 5415174 122103Inovys II- U2

Multi version: D, 2020-11

Language index

English

Français

Nederlands

Deutch

Italiano

Español

Polski

Czech

User manual

Manuel d'utilisation

Gebruiksaanwijzing

Bedienungshandbuch

Manuale di istruzioni

Manual de instrucciones

Instrukcja obsługi

Návod k obsluze

This page is intentionally left blank

Inovys II-E

2020-11

Content

1

EN

NL

Content

Preface........................................................................................................................ 2

1 Your product .................................................................................................. 3

1.1 Description ...................................................................................................... 3

1.2 Accessories .................................................................................................... 4

2 Before use ..................................................................................................... 5

2.1 Intended use ................................................................................................... 5

2.2 General safety instructions ............................................................................. 5

2.3 Symbols on the wheelchair ............................................................................. 5

2.4 Transport and (dis)assembly ........................................................................... 6

2.5 First use and storage .................................................................................... 11

3 Using your wheelchair ................................................................................ 12

3.1 Parking brakes (only for 22”/24” wheels) ...................................................... 12

3.2 Drum brakes (only for 16” fixed wheels) ....................................................... 12

3.3 Moving to/from wheelchair ............................................................................ 13

3.4 Comfort adjustments ..................................................................................... 13

3.5 Riding ............................................................................................................ 15

3.6 Using the handset ......................................................................................... 18

3.7 Battery status and charging .......................................................................... 18

4 Maintenance ................................................................................................ 21

4.1 Points of maintenance .................................................................................. 21

4.2 Instructions of maintenance .......................................................................... 21

4.3 Troubleshooting ............................................................................................ 22

4.4 Expected lifespan .......................................................................................... 22

4.5 End of use ..................................................................................................... 22

5 Technical specifications ............................................................................. 23

Inovys II-E

2020-11

Preface

2

EN

NL

Preface

Congratulations! You are now owner of a Vermeiren wheelchair!

This wheelchair is made by qualified and committed personnel. It is designed and produced

according to high quality standards guarded by Vermeiren.

Thank you for your trust in the products of Vermeiren. To support you on the use of this wheelchair

and its operating options, this manual is offered. Please read it carefully; it will help you to get

familiar with the operation, capabilities and limitations of your wheelchair.

If you still have questions after reading this manual, do not hesitate to contact your specialist

dealer. He/she will be glad to help you.

Important note

To ensure your safety and to prolong the lifetime of your product, please take good care of it and

have it checked and/serviced on a regular basis.

The warranty on this product is based on normal use and maintenance as described in this

manual. Damage to your product caused by improper use or lack of maintenance will cause the

warranty to lapse.

This manual reflects the latest product developments. Vermeiren has the right to implement

changes to this type of product without any obligation to adapt or replace similar products

previously delivered.

Pictures of the product are used to clarify the instructions in this manual. Details of the depicted

product may deviate from your product.

Information available

On our website http://www.vermeiren.com/ you will always find the most recent version of the

information in this manual. Please consult this website regularly for possible updates.

Visually impaired people can download the electronic version of this manual and have it read out

by means of a text-to-speech software application.

User manual

For user and specialist dealer

Installation manual

For specialist dealer

Service manual for wheelchairs

For specialist dealer

Inovys II-E

2020-11

Content

3

EN

NL

1 Your product

1.1 Description

This Inovys II-E wheelchair is easy to operate and can be used indoors as well as outdoors. It is

foldable which makes it very compact to store. The wheelchair is available in multiple sizes and

is easily expandable with optional parts to enhance user’s comfort.

The following picture shows all parts that are relevant to the user. In the operation and

maintenance section, these parts are described if applicable.

Important parts

Before using your wheelchair, check the technical details and limits of intended use, see

chapter 5.

7. Foot strap (2x)

8. Leg rest (2x)

9. Armrest (2x)

10. Brake (2x)

11. Front wheel (2x)

12. Frame

1. Headrest (optional)

2. Backrest

3. Arm pad

4. Handset

5. Leg rest (2x)

6. Footplate (2x)

13. Rear wheel (2x)

14. Hand rim (2x)

15. Storage pocket with power adapter

16. Push handle with handgrip (2x)

17. Headrest support (optional)

1

3

4

5

6

9

12

8

13

16

17

2

7

11

15

14

10

Inovys II-E

2020-11

Your product

4

EN

NL

18

20

22

19

23

21

Important parts, continued

1.2 Accessories

Following accessories are available for the Inovys II-E:

• Wooden table (B12)

• Headrest (L55, L58)

• Personal safety belt (B58)

• Horizontal wedge (B22)

• Hemiplegic armrests (B66)

For more information, please consult your specialist dealer.

18. Handset holder

19. Seat

20. Battery

21. Motor

22. Side panel (2x)

23. Push bar

24. Tip cap (2x)

25. Location of

identification plate

24

25

Inovys II-E

2020-11

Content

5

EN

NL

2 Before use

2.1 Intended use

In this paragraph a brief description of the intended use of your wheelchair is given. Additionally,

relevant warnings are added to the instructions in the other paragraphs. In this way we would like

to make you aware of the possible misuse that may appear.

• This wheelchair is suitable for indoor and outdoor use.

• This wheelchair is designed and produced solely to transport one (1) person with a

maximum weight of 135kg. It is not designed for transport of goods or objects, nor for any

other use than previously described.

• Depending on the type of wheels on your wheelchair, it can be operated by an attendant or

by the user sitting in the wheelchair. You should NOT use this wheelchair without attendant

if you suffer from physical or mental impairments that may put you, or other people, in danger

when riding the wheelchair. For this reason, consult your doctor first and make sure that

your specialist dealer is informed about his advice.

• This wheelchair is not intended to be used as a seat in a motorized vehicle.

• Only use accessories and spare parts approved by Vermeiren.

Please read all technical details and limits of your wheelchair in §7.

2.2 General safety instructions

Risk of injuries and/or damage

Please read and follow the instructions in this manual. Otherwise you may get injured or your

wheelchair may get damaged.

Keep the following general warnings in mind during use:

• Do not use your wheelchair if you are under influence of alcohol, medicines or other

substances that may influence your riding abilities. This also counts for your attendant

operating the wheelchair.

• Be aware that some parts of your wheelchair may get very hot or cold due to ambient

temperature, solar radiation or heating devices. Be careful when touching. Wear protective

clothing if the weather is cold. When going outdoors, riding gloves can be used to improve

the grip on the hand rims.

• Take note of the instructions for care and service. The manufacturer is not liable for damage

caused by improper servicing / care.

2.3 Symbols on the wheelchair

The symbols in following list are applicable to your wheelchair. Symbols can be found in the

relevant ISO standard (ISO 7000, ISO 7001 and IEC 417).

Maximum weight of the user in kg

Outdoor/indoor use (battery and power adapter excluded)

For indoor use only (battery and power adapter)

CAUTION

Inovys II-E

2020-11

Before use

6

EN

NL

Maximum safe slope in ° (degrees).

Maximum speed

Not intended to be used as seat in a motor vehicle

Type designation

2.4 Transport and (dis)assembly

2.4.1 Moving out of the way

Move the wheelchair by using its wheels and roll it to the destination.

If this is not possible, and disassembling is not desired, ask help to lift the wheelchair. Firmly

grasp the frame with both hands and lift it from the floor. Do not use foot or arm rests, or wheels

to grasp the wheelchair.

2.4.2 Transport by aircraft

Since the wheelchair is equipped with a lead-acid battery, it is not possible to transport the

wheelchair (as a whole) by aircraft. If you still consider to do so, consult your airline before

booking your flight. It is also possible to remove the battery and buy a new one at your arrival.

Contact your specialist dealer for information.

2.4.3 Transport by vehicle

Risk of injuries

• Do NOT use your wheelchair as a seat in a vehicle, see symbol.

• Never use the same safety belt for passenger and wheelchair.

1. Use the handset to return your wheelchair to sitting position, see §3.6.

2. Disassemble and lift the wheelchair in the vehicle according to the instructions in §2.4.4.

3. Store the wheelchair and its parts in the luggage compartment. If luggage and passenger

compartments are NOT separated or enclosed, fasten the wheelchair frame securely to the

vehicle.

You can use a ramp to push the wheelchair inside the vehicle, see 3.5.4.

Apply the parking brakes after loading, see §3.1.

2.4.4 Assembly

Risk of injuries or damage

• Make sure that your fingers, clothes, buckles won’t get trapped during assembly.

• Always keep the swing range of the footrest in mind to prevent bystanders from being injured

or objects from being damaged.

• Before use, always make sure that all assembled parts have been firmly secured.

WARNING

CAUTION

Inovys II-E

2020-11

Content

7

EN

NL

Inovys II-E base frame with 16” and 24” wheels - disassembled parts

[1]

[2]

• Place the wheelchair with four wheels on

the ground.

• Fold the backrest frame (34) open.

• Mount the front of the motor to the

backrest frame with the fastener pin (33)

and lock its brace.

• Make sure that the backrest frame is firmly

secured to the motor.

34

33

34

16”

24”

Inovys II-E

2020-11

Before use

8

EN

NL

[3]

[4]

• Hang the backrest with its four screws in

the four brackets (35) of the backrest

frame.

• Tighten the two upper star buttons (36) by

hand.

• Make sure that the backrest is firmly

secured.

• Turn the star knob (37) of the armrest

support anticlockwise and remove it.

• Insert the armrest (9) in the armrest

support.

• Insert the star knob (37) and turn it

clockwise until it is finger-tight.

• Make sure that the armrest is firmly

secured.

• Repeat this for the second armrest.

[5]

[6]

• Hold the leg rest (5) sideways and hang it

in the footrest support (39). Make sure

that the leg rest hole (44) fits over the

lower support part and that the leg rest pin

(38) is inserted in the top support.

• Swing the leg rest (5) inwards until it clicks

in position.

• Repeat for the second leg rest.

• Swing the footplate (6) downwards.

• Repeat for the second footplate.

37

9

38

39

5

44

6

36

35

Inovys II-E

2020-11

Content

9

EN

NL

[7]

[8]

• Swing the calf rest support (40) inwards.

• Turn the calf rest (8) to the back.

• Repeat this for the second calf rest.

• (If applicable) mount the headrest (1) with

the square tube in the headrest support

(41) on the backrest.

• Turn the star knob (42) finger tight.

Your wheelchair is now ready for use.

2.4.5 Disassembly

Risk of injuries or damage

• Make sure that your fingers, clothes, buckles won’t get entrapped during disassembly.

• Always keep the swing range of the footrest in mind to prevent bystanders from being injured or

objects from being damaged.

[1]

[2]

• Apply both parking brakes by operating

the brake lever (10), see §3.1.

• Close the calf rest (8) and turn the calf rest

support (40) outwards.

• Repeat this for the other calf rest.

• Fold both footplates (6) upwards.

CAUTION

8

40

41

42

1

6

40

8

10

Inovys II-E

2020-11

Before use

10

EN

NL

[3]

[4]

• Pull the leg rest lever (50) and swing the

leg rest (5) outwards.

• Lift the leg rest to remove it.

• Repeat this for the other leg rest.

• Turn the star knob (37) anticlockwise.

• Pull and hold the star knob while pulling

the armrest (9) out of the armrest support.

• Retighten the star knob (37).

[5]

[6]

• (If applicable) demount the headrest (1):

o Loosen the star knob (42) of the

headrest suppport and remove it.

o Pull the headrest up until it is free from

the support on the backrest.

• Loosen the two upper star buttons (36) of

the backrest by hand.

• Pull the backrest upwards until it is

released from the four brackets (35).

37

9

1

42

50

5

36

35

Inovys II-E

2020-11

Content

11

EN

NL

[7]

[8]

• Demount the motor from the backrest

frame by opening the brace of the fastener

pin (33) and removing it.

• Fold the backrest frame (34) down onto

the seat.

• Place the fastener pin (33) back in the

frame.

2.4.6 (Dis)Assembling rear wheels (only for 22”/24”):

For transport purposes, it might be necessary to (dis)assemble the rear wheels.

Removing the rear wheels:

1. Press and hold the button (43) while sliding the wheel axle

out of the axle bushy.

2. Repeat this for the other wheel and place the wheelchair

gently on the tipping caps.

Installing the rear wheels:

1. Take one of the rear wheels and lift the wheelchair on one

side.

2. Press and hold the button (43) while sliding the wheel axle

in the axle bushy.

3. Release the button to lock the wheel.

4. Repeat this for the other wheel. Make sure that both wheels are firmly secured.

2.5 First use and storage

Risk of battery damage

• Never completely discharge the battery.

• Do not interrupt the charging cycle; only disconnect the battery charger when the battery is

fully charged.

• Make sure that your wheelchair is stored dry to prevent mould to grow and damage the

upholstery.

• Check the technical details for storage, see chapter 5.

Ensure that all battery connections are plugged in, and that the battery has been fully charged

before using your wheelchair. Ask your dealer if this has already been done or not. To charge,

follow the charging instructions in §3.7.

CAUTION

33

34

33

43

Inovys II-E

2020-11

Using your wheelchair

12

EN

NL

3 Using your wheelchair

Risk of injuries

• First read the previous chapters and inform yourself about the intended use. Do NOT use your

wheelchair unless you have read and fully understood all instructions.

• In case of doubts or questions, do not hesitate to contact your local specialist dealer, your care

provider or technical adviser to help you.

3.1 Parking brakes (only for 22”/24” wheels)

Risk of injuries

• Only operate the brake lever when your wheelchair is stopped.

• An attendant should operate the brake lever if you have impaired mobility.

• Make sure the wheelchair is on a flat horizontal surface before releasing the brakes.

• Never release both brakes simultaneously.

• Brakes may only be adjusted by your specialist dealer.

Risk of damage

• Do not use the parking brakes to slow the wheelchair down during movement.

Your wheelchair is equipped with two manually-operated parking brakes. These brakes are

intended to prevent movement of the wheelchair when parked.

Releasing brakes [A]:

1. With one hand, hold one hand rim tight (or your attendant holds

the push bar with one hand).

2. Pull the brake lever (10) of the OTHER wheel to the REAR.

3. Repeat this for the second wheel and parking brake.

Applying brakes [B]:

1. With one hand, hold one hand rim tight (or your attendant holds

the push bar with one hand).

2. Push the brake lever (10) of the OTHER wheel to the FRONT

until you feel a distinctive lock.

3. Repeat this for the second wheel and parking brake.

Operating parking brakes

3.2 Drum brakes (only for 16” fixed wheels)

Risk of injuries

• Make sure that the wheelchair is on a flat horizontal surface before releasing the brakes.

• Never release both brakes simultaneously.

• To park or stop on a slope, use the parking brakes after coming to a halt.

• Brakes may only be adjusted by your specialist dealer.

WARNING

CAUTION

A

B

10

Inovys II-E

2020-11

Content

13

EN

NL

To operate the drum brakes:

1. Pull the brake levers (60) in a squeeze motion.

2. Each brake lever (60) can be blocked by pushing the lock

lever (61) down with your finger.

3. Release the brake levers (60).

To move/ride again:

1. Pull the brake levers (60) in a squeeze motion. The lock

lever (61) is release by this movement.

2. Hold the handgrips firmly, while releasing the brake levers

(60).

Operating drum brakes

3.3 Moving to/from wheelchair

Risk of injuries or damage

• In case you cannot perform the transfer in a safe manner, ask someone to assist you.

• Do not stand on the footplates during transfer into or out of the chair.

Transfer

1. Position the wheelchair as close as possible to you when sitting in your chair, couch, seat

or bed.

2. Apply both parking brakes to block the movement, see §3.1.

3. Use the handset to move the backrest and seat to sitting position, see §3.6.

4. Fold the footplates upwards to prevent standing on them, or turn the leg rests aside to free

the passage for transfer.

5. If necessary, remove the armrest and/or leg rest on one side (see §0).

6. Transfer to/from the wheelchair using the strength of your arms, or with the help of an

attendant or lifting equipment.

Sitting in the wheelchair

1. Sit down on the seat with your lower back against the backrest.

2. Reinstall the armrest and/or leg rest, if removed.

3. Turn the leg rests back to the front, fold down the footplates and put your feet on the

footplates.

4. Make sure that your upper legs are horizontal and that your feet are in a comfortable

position; adjust the wheelchair according to the instructions in § 3.4.

3.4 Comfort adjustments

Risk of injuries or damage

• The following comfort adjustments can be made by an attendant or caretaker. All other

adjustments are done by your specialist dealer.

• Always keep the swing range of the footrest in mind to prevent bystanders from being injured

or objects from being damaged.

• Make sure that your fingers, clothes, buckles won’t get trapped during adjustment.

CAUTION

60

61

Inovys II-E

2020-11

Using your wheelchair

14

EN

NL

3.4.1 Armrest height

The arm pads (3) of the wheelchair can be adjusted in 6 different

height positions:

1. Turn the star knob (45) anticlockwise to unlock.

2. Pull and hold the star knob to release the inner tube of the

armrest (9).

3. Slide the inner tube of the armrest (9) up/down in the support

(46) until the desired height. Make sure that the holes on the

inner/outer tube align.

4. Retighten the star knob (45) by turning it clockwise.

5. Repeat this for the second armrest. Make sure that the

armrests is firmly secured.

Adjusting armrest height

3.4.2 Push handles / push bar height

Risk of injuries

Always use the available adjustment holes on the push handle. Never exceed the maximum

height adjustment.

The push handles (16) and push bar (23) are connected and can

be adjusted in 7 different height positions:

1. Loosen both star knobs (31) on the handle supports and

remove them.

2. Adjust the height of both push handles simultaneously by

sliding them up/down in the supports. Make sure that the

holes on the inner/outer tube align.

3. Insert the two star knobs (31) in the supports and the

adjustment holes.

4. Turn the star knobs clockwise until they are finger-tight.

5. Make sure that the push handles are firmly secured.

Adjusting push-handle height

3.4.3 Leg rest angle

1. Loosen the lever (62) at the rotation point.

2. Adjust the angle of the leg rest by lifting/lowering the

footplates (between 100° - 190°).

3. Retighten the lever (62) firmly by hand.

4. Repeat this for the second leg rest. Make sure that both

leg rests are firmly secured.

Adjusting footrest angle

CAUTION

16

23

31

9

45

3

46

62

Inovys II-E

2020-11

Content

15

EN

NL

3.4.4 Tip cap height

1. Press and hold the spring button (63).

2. Slide the tip cap tube (64) in/out of the frame tube.

3. Release the spring button.

4. Repeat this for the second tip cap. Make sure that both tip

caps are firmly secured.

Adjusting tip cap height

3.5 Riding

Depending on your medical condition and type of wheelchair, you can ride the wheelchair

yourself or have it pushed by an attendant.

Risk of entrapment

• Prevent your fingers from being caught by the wheel spokes.

• Prevent getting your hands trapped on the hand rims when riding through small passages.

• When driving with an attendant, keep your arms away from the wheels and keep your feet on

the footplates.

Risk of injuries and damage

• Do NOT drive on slopes, obstacles, steps or kerbs larger than the size described in the

technical specifications in chapter 5.

• Do not proceed with your wheelchair in traffic. Always stay on the pavement.

• Do not operate the hand rims with wet hands.

• Pay attention if the road has holes or gaps that may cause entrapment of the wheels.

• Avoid stones and other objects that may block the wheels.

• Always keep the swing range of the footrest in mind to prevent bystanders from being injured

or objects from being damaged.

• Before every usage, make sure that:

o all adjustments are firmly secured, see §3.4.

o the parking brakes are working properly.

o the tires are in good condition, see §4.

3.5.1 Riding with an attendant

1. Release the brakes or have them released by the attendant, while he/she is holding the

wheelchair to prevent movement, see §3.1 or §3.2.

2. The attendant grasps the handgrips or push bar to push the wheelchair in the desired direction.

3. After stopping, apply the brakes while holding the wheelchair in place, see §3.1 or §3.2.

3.5.2 Riding on your own

1. Release the parking brakes one by one, see §3.1.

2. Move your hands to the highest position on both hand rims.

3. Lean forward and push/turn the hand rims forward until your arms are straight.

4. Swing your arms loosely back to the topside of the hand rims and repeat the push movement.

5. To stop: wait until the wheelchair stops and move forward/backward by operating the hand

rims. Apply the parking brakes one by one, see §3.1.

CAUTION

63

64

Inovys II-E

2020-11

Using your wheelchair

16

EN

NL

3.5.3 Riding on slopes

Risk of injuries

• If the attendant has too little strength to control the wheelchair, stop riding

and use the brakes immediately.

• When you stop on a (small) slope, use your brakes, since the wheelchair

may start moving unexpectedly.

1. Secure yourself in the wheelchair with a safety belt.

2. Ask an attendant or a bystander to help you.

3. Drive slowly and in a straight line. Lean slightly forward (A/B) when going

up the slope. Lean backwards, against the backrest, when going down

the slope.

4. Never reverse on a slope.

Going up a slope

3.5.4 Using ramps

Risk of injuries caused by tipping over

• Only use ramps approved by Vermeiren and do not exceed their maximum load.

• Make sure that the wheelchair does not touch the ground or ramp due to the inclination of

the wheelchair.

• Only negotiate ramps with the help of one or two attendants.

1. Adjust the position of backrest, seat and footrest to decrease the volume taken by the

wheelchair and to increase the stability during inclination.

2. Remove the footrests, see §2.4.5.

3. Follow the instructions in §3.5.3.

3.5.5 Using stairs

Risk of injuries caused by tipping over

• Stairs should always be negotiated with the help of two attendants.

• Never try to use stairs that are not appropriate for wheelchairs.

To use the stairs while sitting in your wheelchair, the following instructions should be followed:

1. Remove the footrests, see §2.4.5.

2. One attendant tips the wheelchair slightly backwards by the handles.

3. The second attendant grabs the wheelchair at the front of the frame, on

both sides of the wheelchair.

4. Stay calm, avoid sudden movements and keep your arms inside the

wheelchair.

5. Both attendants lift and pull the wheelchair from step to step while the rear

wheels roll over the steps.

6. After using the stairs, mount the footrests back in place, see §2.4.4.

Using stairs

3.5.6 Coping with obstacles

Risk of injuries caused by tipping over

• Always ask assistance of one or two attendant (s).

• Make sure that the footplates won't touch ground while taking an obstacle. If necessary,

remove the footrests.

• Do not use your wheelchair on an escalator.

• If available, wear your safety belt.

CAUTION

B

A

La pagina sta caricando ...

Vermeiren Inovys II-E Manuale utente

Vermeiren Inovys II-E Manuale utente

in altre lingue

Documenti correlati

Altri documenti