Garmin Alpha® 50 Manuale del proprietario

Marca: Garmin

Modello: Alpha® 50

Categoria: Cura degli animali

Tipo: Manuale del proprietario

Alpha

Owner’s Manual

June 2016 190-02079-03_0A

right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such

changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product.

Garmin

, the Garmin logo, ANT+

, Alpha

, BlueChart

, City Navigator

, and TracBack

are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA

and other countries. BaseCamp

™

and chirp

™

are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express

permission of Garmin.

Windows

is a registered trademark of Microsoft Corporation in the United States and/or other countries. Mac

is a trademark of Apple Inc., registered in the

USA and other countries. microSD

™

and the microSD logo are trademarks of SD-3C, LLC.

Other trademarks and trade names are those of their respective owners.

Table of Contents

Introduction.....................................................................1

Setting Up the System................................................................ 1

Device Overviews....................................................................... 1

Alpha 50 Handheld Device.................................................... 1

Keypad................................................................................... 1

Dog Collar Device.................................................................. 1

Installing Batteries...................................................................... 1

Charging the Dog Collar Device................................................. 1

Turning On the Devices.............................................................. 2

Turning Off the Devices.............................................................. 2

Acquiring Satellite Signals.......................................................... 2

Adjusting the Backlight Brightness............................................. 2

Fitting the Collar on Your Dog.................................................... 2

Using the On-Screen Keyboard.................................................. 2

Dog Tracking.................................................................. 2

Tracking Your Dog on the Map................................................... 2

Navigating to Your Dog...............................................................2

Viewing Dog Status................................................................2

Dog Status Icons....................................................................3

Location Alerts............................................................................ 3

Setting a Geofence Alert........................................................ 3

Setting a Radius Alert............................................................ 3

Editing Location Alerts........................................................... 3

Dog Information.......................................................................... 3

Hunt Metrics........................................................................... 3

Resetting a Dog's Statistics and Track.................................. 3

Changing the Length of the Dog's Track............................... 3

Changing a Dog Name.......................................................... 3

Changing the Color of the Dog's Track.................................. 3

Changing the Dog Type......................................................... 3

Setting Dog Alerts.................................................................. 4

Removing a Dog.................................................................... 4

Pairing a Dog Collar to the Alpha Device................................... 4

Adding a Dog Using the Track and Control Codes................ 4

Assigning a Dog ID Manually................................................. 4

Changing the Update Rate.................................................... 4

Communication with the Collar................................................... 4

Tracking with BaseCamp™ BaseStation.................................... 4

Waypoints, Routes, and Tracks.................................... 4

Waypoints................................................................................... 4

Marking Your Vehicle Location.............................................. 4

Marking Your Current Location.............................................. 5

Marking a Covey.................................................................... 5

Marking a Waypoint Using the Map....................................... 5

Navigating to a Waypoint....................................................... 5

Editing a Waypoint................................................................. 5

Moving a Waypoint on the Map............................................. 5

Repositioning a Waypoint to Your Current Location.............. 5

Increasing the Accuracy of a Waypoint Location................... 5

Projecting a Waypoint............................................................ 5

Deleting a Waypoint............................................................... 5

Routes........................................................................................ 5

Creating a Route.................................................................... 5

Navigating a Saved Route..................................................... 5

Editing a Route...................................................................... 5

Viewing the Active Route....................................................... 5

Reversing a Route................................................................. 5

Deleting a Route.................................................................... 6

Deleting All Routes................................................................ 6

Tracks......................................................................................... 6

Recording Track Logs............................................................ 6

Viewing the Elevation Plot of a Track.................................... 6

Viewing Details about the Track............................................ 6

Saving the Current Track

....................................................... 6

Marking a Location on a Saved Track................................... 6

Navigating to the Start of a Track.......................................... 6

Archiving a Track Manually.................................................... 6

Sending and Receiving Data Wirelessly..................................... 6

Sharing Dog Information........................................................ 6

Receiving Dog Information.....................................................6

Navigation....................................................................... 6

Map............................................................................................. 6

Enabling the Map Data Fields................................................ 7

Compass.....................................................................................7

Calibrating the Compass........................................................7

Navigating with the Bearing Pointer....................................... 7

Course Pointer....................................................................... 7

Find Menu................................................................................... 7

Finding a Waypoint by Name................................................. 7

Navigating with Sight 'N Go........................................................ 7

Viewing the Elevation Plot.......................................................... 7

Calibrating the Barometric Altimeter...................................... 7

Navigating to a Point on the Plot........................................... 7

Changing the Plot Type......................................................... 7

Trip Computer............................................................................. 7

Resetting the Trip Computer.................................................. 7

Applications.................................................................... 8

Setting a Proximity Alarm........................................................... 8

Calculating the Size of an Area.................................................. 8

Viewing the Calendar and Almanacs.......................................... 8

Setting an Alarm......................................................................... 8

Geocaches..................................................................................8

Downloading Geocaches Using a Computer......................... 8

Finding a Geocache............................................................... 8

Filtering the Geocache List.................................................... 8

chirp™....................................................................................8

Opening the Stopwatch.............................................................. 8

Satellite Page..............................................................................8

Changing the Satellite View................................................... 8

Turning Off GPS.................................................................... 9

Simulating a Location.............................................................9

Disabling Dog Data Broadcast....................................................9

Enabling Bark Detection............................................................. 9

Enabling Rescue Mode...............................................................9

VIRB® Remote........................................................................... 9

Customizing Your Device.............................................. 9

Customizing the Main Menu....................................................... 9

Customizing the Data Fields....................................................... 9

Profiles........................................................................................ 9

Creating a Custom Profile...................................................... 9

Editing a Profile Name........................................................... 9

Deleting a Profile....................................................................9

System Settings.......................................................................... 9

Dog Settings............................................................................... 9

Display Settings........................................................................ 10

Setting the Device Tones..........................................................10

Map Settings............................................................................. 10

Advanced Map Settings....................................................... 10

Tracks Settings......................................................................... 10

Changing the Units of Measure................................................ 10

Time Settings............................................................................ 10

Position Format Settings...........................................................10

Heading Settings...................................................................... 10

Altimeter Settings......................................................................10

Geocaching Settings.................................................................11

Routing Settings....................................................................... 11

Marine Map Settings................................................................. 11

Setting up Marine Alarms.....................................................11

Table of Contents i

Device Information....................................................... 11

Viewing Device Information...................................................... 11

Support and Updates................................................................ 11

Support and Updates........................................................... 11

Updating the Software......................................................... 11

Device Care.............................................................................. 11

Cleaning the Device............................................................. 11

Cleaning the Screen............................................................ 11

Alpha 50 Handheld Device Specifications................................ 12

T5 Dog Collar Device Specifications........................................ 12

T5 mini Dog Collar Device Specifications................................. 12

Battery Information................................................................... 12

Long-Term Storage.............................................................. 12

Data Management.................................................................... 12

File Types............................................................................ 12

Installing a Memory Card..................................................... 12

Connecting the Handheld Device to a Computer................ 12

Connecting the Collar to a Computer.................................. 13

Transferring Dog Tracks to BaseCamp............................... 13

Deleting Files....................................................................... 13

Disconnecting the USB Cable..............................................13

Appendix....................................................................... 13

Accessories and Replacement Parts........................................ 13

Purchasing Accessories.......................................................13

Dog Device Battery Replacement Instructions.................... 14

Replacing the T5 mini Dog Collar Device Battery................ 14

Replacing the Collar Strap................................................... 15

VHF Radio Information........................................................ 15

Replacing the VHF Antenna in the Handheld Device.......... 15

Replacing the VHF Antenna in the Dog Collar Device........ 15

Changing the Fuse in the Vehicle Power Cable.................. 15

Data Fields................................................................................15

Troubleshooting........................................................................ 16

My handheld device is not responding................................ 16

My dog collar devices have conflicting IDs.......................... 16

My handheld device does not report barks.......................... 16

Getting More Information.......................................................... 17

Registering Your Device...................................................... 17

Index.............................................................................. 18

ii Table of Contents

Introduction

WARNING

See the Important Safety and Product Information guide in the

product box for product warnings and other important

information.

Setting Up the System

You must set up the handheld device and the dog collar device

before you can use the devices.

Install batteries in the handheld device (Installing Batteries,

page 1).

Charge the dog collar device (Charging the Dog Collar

Device, page 1).

Turn on the devices (Turning On the Devices, page 2).

If necessary, add the dog collar device to the handheld

device (Pairing a Dog Collar to the Alpha Device, page 4).

Acquire satellite signals (Acquiring Satellite Signals,

page 2).

Device Overviews

Alpha 50 Handheld Device

NOTICE

Avoid using a high-powered radio (greater than 5 watts) in close

proximity to the handheld device. It may cause irreversible

damage to the handheld device.

GPS antenna

VHF antenna

Power key

Display

Keypad

USB port (under weather cap)

microSD

™

card slot (under battery door)

Mounting spine

Battery cover D-ring

Keypad

IN Select to zoom in on the map.

OUT Select to zoom out on the map.

MAP Select to view the map.

MENU Select to open the menu for the active page.

Select twice to open the main menu.

ENTER Select to select options and acknowledge messages.

BACK Select to cancel data entry or return to the previous menu or

page.

MARK Select to mark your current location.

DOG Select to view the dog tracking page.

Select to view or scroll through options and to move the map

pointer.

Locking the Keypad

Select .

Select OUT.

Dog Collar Device

NOTE: Your dog collar device may look different than the device

pictured.

VHF antenna

GPS antenna

Power key

Status LED and flashing beacon LEDs

Installing Batteries

The handheld device operates on two AA batteries (not

included). Use NiMH or lithium batteries for best results.

Turn the D-ring counter-clockwise, and pull up to remove the

cover.

Insert two AA batteries, observing polarity.

Replace the battery cover, and turn the D-ring clockwise.

Hold .

Select Setup > System > Battery Type.

Select Alkaline, Lithium, or Rechargeable NiMH.

Charging the Dog Collar Device

NOTICE

To prevent corrosion, thoroughly dry the contacts on the collar

and the surrounding area before connecting the charging clip.

NOTE: Your dog collar device may look different than the device

pictured.

Introduction 1

You should fully charge the battery before you use the device for

the first time. Charging a fully depleted battery takes about five

hours.

Snap the charging clip

onto the device

Plug the small end of the power cable into the mini-USB port

on the charging clip cable.

Plug the power cable into a power source.

The status LED is solid red when the collar is charging.

After the status LED turns solid green, remove the charging

clip from the collar.

Turning On the Devices

• On the handheld device, hold the power key until the

LCD display turns on.

• On the dog collar device, hold the power key until the status

LED flashes and the collar beeps.

Turning Off the Devices

• On the handheld device, hold the power key until the

LCD screen turns off.

• On the dog collar device, hold the power key until the status

LED turns red.

Acquiring Satellite Signals

Both the collar and handheld device must acquire satellite

signals before you put the collar on your dog. Acquiring satellites

can take a few minutes.

Go outdoors to an open area.

Turn on both devices (Turning On the Devices, page 2).

Select the power key on the handheld device.

shows the GPS signal strength.

When the collar has acquired satellite signals, the status LED

flashes a double-blink or triple-blink in green.

Adjusting the Backlight Brightness

NOTE: The backlight brightness may be limited when the

battery strength is low.

Extensive use of screen backlighting can significantly reduce

battery life.

Select .

Select an option:

• To change between the preset brightness levels, select .

• To adjust the brightness levels manually, select or .

Select ENTER.

Fitting the Collar on Your Dog

CAUTION

Do not spray the device or collar with harsh chemicals including

but not limited to flea or tick spray. Always ensure that any flea

or tick spray that is applied to the dog is completely dry before

placing the collar on the dog. Small amounts of harsh chemicals

can damage the plastic components and collar laminate.

Before you can put the collar on the dog, you must pair the

handheld device and collar (Pairing a Dog Collar to the Alpha

Device, page 4), and acquire satellite signals (Acquiring

Satellite Signals, page 2).

Position the collar with the VHF whip antenna pointing up, the

GPS antenna facing up, and the LEDs facing forward.

Place the collar around the middle of the dog's neck.

Tighten the strap so it is snug around the dog's neck.

NOTE: The collar should fit tightly and should not be able to

rotate or slide on the dog's neck. The dog must be able to

swallow food and water normally. You should observe your

dog's behavior to verify the collar is not too tight.

If the strap is too long, cut off the excess, leaving at least

7.62 cm (3 in.) to spare.

Using the On-Screen Keyboard

A keyboard appears when you enter text.

• Select , , , and to select a character, and select

ENTER.

• Select to backspace.

• Select to shift.

• Select IN or OUT to change the character mode of the

keyboard.

• Select Done to save the text and close the keyboard.

Dog Tracking

The handheld device allows you to track your dog, using the

tracking compass or map. The map displays your location and

your dog's location and tracks. The compass pointer indicates

the direction of the dog's current location.

Tracking Your Dog on the Map

Before you can track a dog on the map, you must add them to

the handheld device (Pairing a Dog Collar to the Alpha Device,

page 4).

You can view the dog's location on the map.

Select MAP.

Select IN and OUT to zoom in and out of the map.

Navigating to Your Dog

Select Dog List.

Select the dog.

Select Show Info > Go.

The map opens.

Follow the magenta line to the dog.

Viewing Dog Status

You can view your dog's status, such as the direction and

distance to the dog from the handheld device. To determine if

2 Dog Tracking

your dog is barking, you must first enable bark detection

(Enabling Bark Detection, page 9).

From the main menu, select DOG to view the dog tracking

page.

If you have additional dogs, scroll through the list to find the

dog.

The handheld device can track up to 20 dogs.

Select ENTER.

Dog Status Icons

Sitting

Running

On point

Treed

Unknown*

*The unknown status icon indicates that the collar has not

acquired a satellite signal and that the handheld device cannot

determine the location of the dog.

Location Alerts

Location alerts notify you when your dogs enter or exit a

particular location. You can create a custom geofence or use a

radius around your current location.

A geofence is an invisible boundary around an area and is

created using points on the map. The virtual boundaries of a

geofence are accurate up to approximately 3 m (10 ft.).

Geofences perform best when sized to cover an area

encompassing an average sized backyard (approximately

¼ acre).

Setting a Geofence Alert

Select Setup > Location Alerts > Add Alert > Geofence.

On the map, select a point for the first corner of the geofence,

and select ENTER.

Select additional points to define the geofence boundary.

You must select at least 3 points, and you can select up to 10

points.

Select BACK.

Setting a Radius Alert

You can receive an alert when a dog or contact moves within or

beyond a specified distance from you.

Select Setup > Location Alerts > Add Alert > Radius.

Select the unit of measurement.

Enter the radius distance, and select Done.

Editing Location Alerts

Select Setup > Location Alerts.

Select an alert.

Select an option:

• Select Disable to turn off notifications for this alert.

• Select Set Alert Type to set the way the device notifies

you for this alert.

• Select Set Alert Mode to set the notification to sound on

exit, entrance, or both.

• Select Delete to remove the alert.

Dog Information

The handheld device assigns a default name, "Dog," to the dog

collar device if it was packaged with the handheld device.

Hunt Metrics

Hunt metrics provides a collection of data that helps you

understand the hunting patterns and behaviors of your dog. The

hunt metrics reset automatically at the beginning of each new

hunt.

Data Fields

Barks: The number of times the dog barks during the hunt. Bark

alerts are triggered by low intensity level barks. This data

field requires bark detection to be enabled (Enabling Bark

Detection, page 9).

NOTE: This feature is not available in all areas.

Bays: The number of times the dog bays during the hunt. Bay

alerts are triggered by high intensity level barks. This data

field requires bark detection to be enabled (Enabling Bark

Detection, page 9).

NOTE: This feature is not available in all areas.

Distance: The total distance the dog traveled.

Dog Score: A combination of metrics that indicates how well a

dog performed on a hunt.

On Point: The number of times and the locations where the dog

pointed during the hunt.

Time: The amount of time the dog was afield.

Treed: The number of times and locations where the dog treed

during the hunt.

Resetting a Dog's Statistics and Track

You might want to clear the dog statistics and track before a

new hunt.

Select Dog List.

Select a dog.

Select Show Info > Reset > Yes.

Changing the Length of the Dog's Track

You can adjust the length of time the dog track appears on the

map. Reducing the duration of the track can reduce the clutter

on the map. Changing the map does not affect the tracks stored

in the handheld device.

Select Setup > Dogs > Dog Track Length on Map.

Select an option.

Select Map.

Changing a Dog Name

Select DOG > ENTER.

The dog information appears.

Select the name field.

The on-screen keyboard appears (Using the On-Screen

Keyboard, page 2).

Enter the name of the dog.

Changing the Color of the Dog's Track

You can change the track color of the dog. It is helpful to have

the track color match the color of the collar strap, if possible.

Select Dog List.

Select a dog.

Select Show Info.

Select the colored square next to the dog’s name.

Select a color.

Changing the Dog Type

Before you can change the dog type, you must turn on the dog

collar device and bring it within 3 m (10 ft.) of the handheld

device.

You can assign a dog type so the appropriate dog status

symbols appear.

Dog Tracking 3

Select DOG > ENTER > MENU.

Select Change Dog Type.

Select a type.

Setting Dog Alerts

You can adjust how the handheld device alerts you to certain

actions of the dog.

Select Setup > Dogs > Dog Alerts.

Select an action.

Select the method the device uses to alert you for this action.

Repeat steps 2 and 3 as needed.

Removing a Dog

Select Dog List.

Select a dog.

Select Remove.

Pairing a Dog Collar to the Alpha Device

Before you can pair devices to the handheld device, the

handheld device must be close enough to the dog collar device

to touch it.

The handheld device can track up to 20 dogs with dog collar

devices. If you purchase additional dog collar devices, you can

link them to the handheld device.

Select DOG.

Select Add Dog.

Turn off the dog collar device.

Follow the on-screen instructions.

By default, the new dog is named “Dog” and an ID number is

randomly assigned.

An error message could appear if there is a conflict with the

ID number of another dog.

After pairing is complete, you can add the dog collar device to

additional handheld devices using the dog collar device track

code or control code.

Adding a Dog Using the Track and Control Codes

NOTE: This feature varies based on dog collar device type and

feature availability in your area.

Before you can add a dog using the track and control codes, the

dog owner must find the track and control codes (Finding the

Dog ID and Track and Control Codes, page 4) and tell them

to you.

You can use track and control codes to authorize a handheld

device to interact with your dog collar device. If you are not near

the dog you want to add or you cannot put the collar into pairing

mode, you can add the dog using the track and control codes.

Select DOG > Add Dog.

When asked if you are near the collar, select No.

When asked if you know the track and control codes, select

Yes.

Enter the track or control code for the collar, and select

Done.

The dog’s track code allows you to track the dog. The dog’s

control code allows you to both track the dog and access the

collar settings.

Enter the name of the dog, and select Done > OK.

Finding the Dog ID and Track and Control Codes

You can share a dog’s track code so another person can track

your dog. Also, you can share a dog's control code so another

person can track your dog and access the collar settings.

Select Dog List.

Select a dog.

Select Show Info.

Assigning a Dog ID Manually

Before you can assign a dog ID manually, you must turn on the

dog collar device and bring it within 3 m (10 ft.) of the handheld

device. You must assign a new ID number to the dog.

Select DOG.

Select a dog.

Select Show Info > MENU > Change ID.

Select an unassigned and nonconflicting ID.

Changing the Update Rate

You can select a longer duration for the update rate to conserve

battery power. The 30-second and 2-minute rates reduce battery

drain, but they record less-detailed dog tracks and statistics.

Bring the handheld device within a few feet of the dog collar

device.

Select DOG.

Select a dog.

Select Show Info > MENU > Change Update Rate.

Select an update rate.

Communication with the Collar

You should keep an unobstructed line of sight between your

handheld device and the dog collar device to produce the best

communication signal. To achieve the best line-of-sight

conditions, you should move to the highest elevation point in

your area (for example, on the top of a hill).

Best

Good

Poor

Tracking with BaseCamp

™

BaseStation

Before you can track your dogs using BaseCamp, you must

download BaseCamp to your computer (www.garmin.com

/basecamp).

The BaseStation feature of BaseCamp allows you to track your

dogs in real-time on a computer. For more information on using

BaseCamp, see the help file in the application.

Select Setup > System > BaseCamp Basestation >

Prompted.

Open BaseCamp.

Follow the on-screen instructions.

Waypoints, Routes, and Tracks

Waypoints

Waypoints are locations you record and store in the device.

Waypoints can mark where you are, where you are going, or

where you have been. You can add details about the location,

such as name, elevation, and depth.

Marking Your Vehicle Location

You can mark the location of your vehicle so you can navigate

back to your vehicle after a hunt.

4 Waypoints, Routes, and Tracks

From the main menu, select MARK.

Follow the on-screen instructions.

Marking Your Current Location

Select MARK.

Select an option:

• Select New.

• Select a default location name, such as Truck or Camp.

Edit the location information (optional).

Select Done.

Marking a Covey

You can mark a covey location and enter the estimated number

of birds flushed and the number of birds taken.

Select MARK > Covey.

Enter the number of birds flushed, the number of birds taken,

and select OK.

Review and edit location information (optional).

Select Done.

Marking a Waypoint Using the Map

Select MAP.

Select a location on the map.

Select ENTER > MENU > Save as Waypoint.

Navigating to a Waypoint

From the main menu, select Tools > Find > Waypoints .

Select a waypoint.

Select Go.

Editing a Waypoint

Before you can edit a waypoint, you must create a waypoint.

From the main menu, select Tools > Waypoint Mgr..

Select a waypoint.

Select an item to edit, such as the name.

Enter the new information.

Moving a Waypoint on the Map

From the main menu, select Tools > Waypoint Mgr..

Select a waypoint.

Select MENU > Move Waypoint.

Select a location on the map.

Select ENTER.

Repositioning a Waypoint to Your Current Location

You can change the position of a waypoint. For example, if you

move your vehicle, you can change the location to your current

position.

Select Tools > Waypoint Mgr..

Select a waypoint.

Select MENU > Reposition Here.

The waypoint position changes to your current location.

Increasing the Accuracy of a Waypoint Location

You can refine a waypoint location for more accuracy. When

averaging, the device takes several readings at the same

location and uses the average value to provide more accuracy.

Select Tools > Waypoint Mgr..

Select a waypoint.

Select MENU > Average Location.

Move to the waypoint location.

Select Start.

Follow the on-screen instructions.

When the confidence status bar reaches 100%, select Save.

For best results, collect 4 to 8 samples for the waypoint, waiting

at least 90 minutes between samples.

Projecting a Waypoint

You can create a new location by projecting the distance and

bearing from a marked location to a new location.

From the main menu, select Tools > Waypoint Mgr..

Select a waypoint.

Select MENU > Project Waypoint.

Follow the on-screen instructions.

Select an option:

• To save the waypoint information, select Save.

• To save and edit the waypoint information, select Save

and Edit.

Deleting a Waypoint

From the main menu, select Tools > Waypoint Mgr..

Select a waypoint.

Select MENU > Delete > Yes.

Routes

A route is a sequence of waypoints or locations that leads you to

your final destination.

Creating a Route

Select Tools > Route Planner > Create Route > Select

First Point.

Select a category.

Select the first point on the route.

Select Use > Select Next Point.

Select a point.

Repeat steps 3 through 5 to add all the points in the route.

Navigating a Saved Route

Select Tools > Route Planner.

Select a route.

Select View Map > Go.

Navigate using the compass (Navigating with the Bearing

Pointer, page 7) or map (Map, page 6).

Editing a Route

Select Tools > Route Planner.

Select a route.

Select Edit Route.

Select a point.

Select an option:

• To view the point on the map, select Review.

• To change the order of the points on the route, select

Move Up or Move Down.

• To insert an additional point on the route, select Insert.

The additional point is inserted before the point you are

editing.

• To remove the point from the route, select Remove.

Viewing the Active Route

Select Tools > Active Route.

Select a point in the route to view additional details.

Reversing a Route

Select Tools > Route Planner.

Select a route.

Select Reverse Route.

Waypoints, Routes, and Tracks 5

Deleting a Route

Select Tools > Route Planner.

Select a route.

Select Delete Route > Yes.

Deleting All Routes

From the main menu, select Tools > Route Planner.

Select MENU > Delete All > Yes.

Tracks

A track is a recording of your path. The track log contains

information about points along the recorded path, including time,

location, and elevation for each point.

Recording Track Logs

From the Main Menu, select Setup > Tracks > Track Log.

Select Record, Do Not Show or Record, Show On Map.

If you select Record, Show On Map, a line on the map

indicates your track.

Select Record Method.

Select an option:

• To record tracks at a variable rate that creates an

optimum representation of your tracks, select Auto.

• To record tracks at a specified distance, select Distance.

• To record tracks at a specified time, select Time.

Select Recording Interval.

Complete an action:

• If you selected Auto for the Record Method, select an

option to record tracks more or less often.

NOTE: Using the Most Often interval provides the most track

detail, but fills up the device memory quicker.

• If you selected Distance or Time for the Record Method,

enter a value.

As you move with the device turned on, a track log is created.

Viewing the Elevation Plot of a Track

Select Tools > Track Manager.

Select a track.

Select Elevation Plot.

Viewing Details about the Track

Select Tools > Track Manager.

Select a track.

Select View Map.

The beginning and the end of the track are marked by flags.

Select the information bar at the top of the screen.

Information about the track appears.

Saving the Current Track

Select Tools > Track Manager.

Select a track.

Select an option:

• To save the entire track, select Save Track.

• To save part of the track, select Save Portion, and select

the part to save.

Marking a Location on a Saved Track

From the main menu, select Tools > Track Manager.

Select a track.

Select View Map.

Select a location on the track.

Select MARK > New.

Edit the location information (optional).

Navigating to the Start of a Track

You can navigate back to the beginning of a track. This can be

helpful when finding your way back to camp or the trail head.

Select Tools > Track Manager > Current Track > View

Map.

Select TracBack.

The map page opens with your route marked with a magenta

line.

Navigate using the map (Map, page 6) or the compass

(Navigating with the Bearing Pointer, page 7).

Archiving a Track Manually

You can archive saved tracks to save memory space.

Select Tools > Track Manager.

Select a track.

Select Archive.

Archiving Tracks Automatically

Select Setup > Tracks > Auto Archive.

Select an option.

Sending and Receiving Data Wirelessly

Before you can share data wirelessly, you must be within 3 m

(10 ft.) of a compatible Garmin

device.

You can share waypoints, geocaches, routes, and tracks

wirelessly.

Select Tools > Share Wirelessly.

Select Send or Receive.

Follow the on-screen instructions.

Sharing Dog Information

Before you can share dog information with another handheld

device user, the user must enable their handheld device to

receive wirelessly and bring it within range of the sending device

and dog collar device.

From the dog list page, select DOG.

Select a dog.

Select Share Wirelessly.

Select an option:

• To share the dog's track only, select Track Only.

• To share the dog's track and the collar's settings, select

Track and Control.

Your device sends the dog name, unit ID, and update rate

information.

Receiving Dog Information

From the dog tracking page, select DOG > MENU > Receive

Wirelessly.

Navigation

You can navigate routes and tracks, to a waypoint, geocache,

photo, or any saved location in the device. You can use the map

or the compass to navigate to your destination.

Map

represents your location on the map. As you travel, the icon

moves and leaves a track log (trail). Waypoint names and

symbols appear on the map. When you are navigating to a

destination, your route is marked with a magenta line on the

map.

When the map orientation is Track Up, objects on the map

appear to rotate around your position. As you travel, the entire

6 Navigation

map reorients in the direction you are facing. You can stabilize

the objects by setting the orientation to North Up (Map Settings,

page 10.

To open the map, select MAP.

Enabling the Map Data Fields

Select MAP > MENU > Setup Map > Data Fields.

Select an option.

Compass

The handheld device has a 3-axis, tilt-compensated compass.

You can use a bearing pointer or a course pointer to navigate to

your destination.

Calibrating the Compass

NOTE: You must calibrate the electronic compass outdoors. Do

not stand near objects that influence magnetic fields, such as

cars, buildings, or overhead power lines.

The device has a 3-axis electronic compass. You should

calibrate the compass after moving long distances, experiencing

temperature changes, or changing the batteries.

Select DOG > MENU.

Select Calibrate Compass > Start.

Follow the on-screen instructions.

Navigating with the Bearing Pointer

When navigating to a destination, points to your destination,

regardless of the direction you are moving.

While navigating to a destination, select Tools > Compass

Turn until points toward the top of the compass, and

continue moving in that direction to the destination.

Course Pointer

The course pointer is most useful if you are navigating on water

or where there are no major obstacles in your path. It can also

help you avoid hazards near the course, such as shoals or

submerged rocks.

To enable the course pointer, from the compass, select MENU >

Setup Heading > Go To Line (Pointer).

The course pointer

indicates your relationship to the course

line leading to the destination. The course deviation indicator

(CDI)

provides the indication of drift (right or left) from the

course. The scale

refers to the distance between dots

the course deviation indicator, which tell you how far off course

you are.

Find Menu

You can use the find menu to search for waypoints, cities, and

coordinates. You can download and navigate to photos, tracks,

and geocaches. Additional categories appear if you have

optional, compatible detailed maps loaded on the device. When

you open a category, the list contains items near your current

location or the map pointer (if active).

Finding a Waypoint by Name

From the main menu, select Tools > Find > Waypoints >

MENU > Spell Search.

Enter the name.

Matches appear as you select characters in the name.

Select the waypoint.

Finding a Waypoint Near Another Waypoint

From the main menu, select Tools > Waypoint Mgr..

Select a waypoint.

Select MENU > Find Near Here.

Select a category.

The list includes waypoints near the original waypoint.

Navigating with Sight 'N Go

You can point the device at an object in the distance, lock in the

direction, and navigate to the object.

Select Tools > Sight 'N Go

Point the device at an object.

Select Lock Direction > Set Course.

Navigate using the compass (Navigating with the Bearing

Pointer, page 7) or map (Map, page 6).

Viewing the Elevation Plot

By default, the elevation plot displays the elevation for an

elapsed time. You can customize the plot (Changing the Plot

Type, page 7) and the data fields (Customizing the Data

Fields, page 9).

Select Tools > Elevation Plot.

Calibrating the Barometric Altimeter

You can calibrate the barometric altimeter manually if you know

the correct elevation or the correct barometric pressure.

Go to a location where the elevation or barometric pressure

is known.

Select Tools > Elevation Plot > MENU > Calibrate

Altimeter.

Follow the on-screen instructions.

Navigating to a Point on the Plot

Select Tools > Elevation Plot.

Select a point on the plot.

Details about the point appear in the upper-left corner of the

plot.

Select MENU > View Map.

Select the information bar at the top of the screen.

Select Go.

Navigate using the compass (Navigating with the Bearing

Pointer, page 7) or map (Map, page 6).

Changing the Plot Type

You can change the elevation plot to display pressure and

elevation over time or distance.

Select Tools > Elevation Plot > MENU > Change Plot

Type.

Select an option.

Trip Computer

The trip computer displays your current speed, average speed,

maximum speed, trip odometer, and other helpful statistics. You

can customize the trip computer layout, dashboard, and data

fields (Customizing the Data Fields, page 9).

To open the trip computer, select Tools > Trip Computer.

Resetting the Trip Computer

For accurate trip information, you can reset the trip information

before beginning a trip.

Select Tools > Trip Computer.

Navigation 7

Select MENU > Reset > Reset Trip Data.

Applications

Setting a Proximity Alarm

Proximity alarms alert you when you or your dogs are within a

specified range of a particular location. A tone sounds when you

enter the designated radius.

Select Tools > Proximity Alarms.

Select Create Alarm.

Select a category.

Select a location.

Select Use.

Enter a radius.

When you enter an area with a proximity alarm, the device

sounds a tone.

Calculating the Size of an Area

Select Tools > Area Calculation > Start.

Walk around the perimeter of the area you want to calculate.

When finished, select Calculate.

Viewing the Calendar and Almanacs

You can view device activity, such as when a waypoint was

saved, and almanac information for the sun and moon, and

hunting and fishing.

Select Tools.

Select an option:

• To view device activity for specific days, select Calendar.

• To view the sunrise, sunset, moonrise, and moonset

times, select Sun and Moon.

• To view the predicted best times for hunting and fishing,

select Hunt and Fish.

If necessary, select or to view a different day.

Setting an Alarm

Select Tools > Alarm Clock.

Enter the time.

Select Turn Alarm On.

Select an option.

The alarm sounds at the selected time. If the device is off at the

alarm time, the device turns on and sounds the alarm.

Geocaches

Geocaching is a treasure hunting activity in which players hide

or search for hidden caches using clues and GPS coordinates.

Downloading Geocaches Using a Computer

You can load geocaches manually onto your device using a

computer (Connecting the Handheld Device to a Computer,

page 12). You can place the geocache files into a GPX file

and import them into the GPX folder on the device. With a

premium membership to geocaching.com, you can use the

"pocket query" feature to load a large group of geocaches onto

your device as a single GPX file.

Connect the device to your computer using a USB cable.

Go to www.geocaching.com/play .

If necessary, create an account.

Follow the instructions at geocaching.com to find and

download geocaches to your device.

Finding a Geocache

Before you can navigate to a geocache, you must have one or

more geocaches loaded on your device.

From the main menu, select Tools > Geocaches.

Select a geocache.

Select Go.

When a geocache is found, the handheld device marks the

cache as found, logs an entry into the calendar, and shows the

nearest cache.

Filtering the Geocache List

You can filter your geocache list based on certain factors, such

as the level of difficulty.

From the main menu, select Tools > Find > Geocaches >

MENU > Apply Filter > Quick Filter.

Select items to filter.

Select Search.

Editing a Custom Geocache Filter

Select Setup > Geocaches > Filter Setup.

Select a filter.

Select an item to edit.

Creating and Saving a Geocache Filter

You can create and save custom filters for geocaches based on

specific factors. After you set up the filter, you can apply it in the

geocaches list.

Select Setup > Geocaches > Filter Setup > Create Filter.

Select items to filter.

Select an option:

• To apply the filter to the geocache list, select Search.

• To save the filter, select BACK. After it is saved, the filter

is automatically named. You can access the custom filter

from the geocaches list.

chirp

™

A chirp is a small Garmin accessory that is programmed and left

in a geocache. You can use your device to find a chirp in a

geocache. For more information about the chirp, see the chirp

Owner's Manual at www.garmin.com.

Enabling chirp Searching

Select Setup > Geocaches.

Select chirp Searching > On.

Finding a Geocache with a chirp

From the main menu, select Tools > Find > Geocaches >

MENU > Show chirp Details > Go.

Begin navigating to a geocache.

When you are within 10 m (33 ft.) of the geocache that

contains a chirp device, details about the chirp device

appear.

If available, select Go to navigate to the next stage of the

geocache.

Opening the Stopwatch

Select Tools > Stopwatch.

Satellite Page

The satellite page shows your current location, GPS accuracy,

satellite locations, and signal strength.

Changing the Satellite View

The default satellite view has north at the top of the screen. You

can change the orientation of the satellite view to place your

current track toward the top of the screen.

Select Tools > Satellite.

8 Applications

Select MENU > Track Up.

Turning Off GPS

Select Tools > Satellite.

Select MENU > Use With GPS Off.

Simulating a Location

Before you can simulate a location, you must turn off GPS.

Select Tools > Satellite.

Select MENU > Set Location On Map.

Select a location.

Select Use.

Disabling Dog Data Broadcast

By default, the handheld device broadcasts dog data to

compatible devices. You can disable data broadcasting to keep

your data from being seen on other compatible devices. See the

owner's manual for your compatible device for more information.

Select Setup > Dogs > Broadcast Dog Data > Off.

Enabling Bark Detection

NOTE: This feature is not available in all areas.

Select Setup > Dogs > Bark Detection.

A barking icon appears on the dog tracking page and the map

page.

When the dog collar device is active and properly fitted on the

dog (Fitting the Collar on Your Dog, page 2), it detects barks

automatically. After bark detection is enabled, you can set up a

bark alert (Setting Dog Alerts, page 4).

Enabling Rescue Mode

Before you can enable rescue mode, you must turn on the dog

collar device and bring it within 3 m (10 ft.) of the handheld

device.

If you are concerned about your dog becoming lost and running

the battery down, you can enable rescue mode. Rescue mode

extends the battery life of the collar to allow for more time to

locate the dog. You can preserve the battery life of your dog

collar device by enabling a low power, battery-saving mode from

your handheld device. This reduces the frequency that the collar

updates its position to the handheld device.

From the dog tracking page, select a dog.

The dog information page appears.

Select MENU > Rescue Mode.

Wait until the confirmation message appears before you

release your dog.

VIRB

Remote

The VIRB remote function allows you to control your VIRB

action camera using your device. Go to www.garmin.com/VIRB

to purchase a VIRB action camera.

Customizing Your Device

Customizing the Main Menu

You can move, add, and delete items in the main menu.

From the main menu, select MENU > Change Item Order.

Select a menu item.

Select an option:

• Select Move to change the placement of the item in the

list.

• Select Insert to add a new item to the list.

• Select Remove to delete an item from the list.

Customizing the Data Fields

Before you can customize the data fields on the map, you must

enable the data fields (Enabling the Map Data Fields, page 7).

You can customize the data fields and dashboards of the map,

compass, elevation plot, and trip computer.

Open the page for which you will change the data fields.

Select MENU > Change Data Fields.

Select a data field to customize.

Select the new data field.

For data field descriptions, see Data Fields, page 15.

Profiles

Profiles are a collection of settings that optimize your device

based on how you are using it. For example, the settings and

views are different when you use the device for hunting than

when geocaching.

Profiles are associated with the activity screens, including the

home screen.

When you are using a profile and you change settings, such as

data fields or units of measurement, the changes are saved

automatically as part of the profile.

Creating a Custom Profile

You can customize your settings and data fields for a particular

activity or trip.

From the main menu, select Tools > Profile Change.

Select MENU > Setup Profiles > Create Profile > OK.

Customize the settings as necessary.

Customize the data fields as necessary.

Any changes you make to the settings, dashboards, and data

fields are automatically saved to the active profile.

Editing a Profile Name

From the main menu, select Tools > Profile Change >

MENU > Setup Profiles.

Select a profile.

Select Edit Name.

Enter the new name.

Deleting a Profile

From the main menu, select Tools > Profile Change >

MENU > Setup Profiles.

Select a profile.

Select Delete.

System Settings

Select Setup > System.

GPS: Sets the GPS to Normal, WAAS/EGNOS (Wide Area

Augmentation System/European Geostationary Navigation

Overlay Service), or Demo Mode (GPS off). For more

information about WAAS, go to www.garmin.com/aboutGPS

/waas.html.

Language: Sets the text language on the device.

NOTE: Changing the text language does not change the

language of user-entered data or map data, such as street

names.

Battery Type: Allows you to select the type of AA battery you

are using.

BaseCamp Basestation: Sets how the device connects to

BaseCamp when the device is connected to the computer.

Dog Settings

Select Setup > Dogs.

Customizing Your Device 9

Dog Track Length on Map: Sets the length of time the dog

track appears on the map. Reducing the duration of the track

can reduce the clutter on the map.

Zoom Map To Dogs: Automatically zooms the map to show all

of the dogs' locations and your location unless you manually

pan the map. This feature can help you locate your dogs

quickly.

Broadcast Dog Data: Automatically sends dog data to

compatible devices (Disabling Dog Data Broadcast, page 9).

Dog Alerts: Sets how you are alerted to certain actions (Setting

Dog Alerts, page 4).

Bark Detection: Enables your device to detect barks.

NOTE: This feature is not available in all areas.

Display Settings

Select Setup > Display.

Backlight Timeout: Adjusts the length of time before the

backlight turns off.

Battery Save: Saves the battery power and prolongs the battery

life by turning off the screen when the backlight times out.

Screen Capture: Allows you to save the image on the device

screen.

Colors: Changes the appearance of the display background and

selection highlight.

Setting the Device Tones

You can customize tones for messages, keys, warnings, and

alarms.

Select Setup > Tones.

Select a tone for each audible type.

Map Settings

Select Setup > Map.

Orientation: Adjusts how the map is shown on the page. North

Up shows north at the top of the page. Track Up shows a top-

down view with your current direction of travel toward the top

of the page. Automotive Mode shows an 3D automotive view

with the direction of travel at the top.

Guidance Text: Sets when the guidance text appears on the

map.

Data Fields: Customizes the data fields and dashboards of the

map, compass, elevation plot, and trip computer.

Map Information: Enables or disables the maps currently

loaded on the device.

Advanced Map Settings

Select Setup > Map > Advanced Map Setup.

Auto Zoom: Automatically selects the appropriate zoom level

for optimal use on your map. When Off is selected, you must

zoom in or out manually.

Zoom Levels: Adjusts the zoom level at which map items will

appear. The map items will not appear when the map zoom

level is higher than the selected level.

Text Size: Selects the text size for map items.

Detail: Selects the amount of detail shown on the map. Showing

more detail may cause the map to redraw more slowly.

Shaded Relief: Shows detail relief on the map (if available) or

turns off shading.

Tracks Settings

Select Setup > Tracks.

Track Log: Turns track recording on or off.

Record Method: Sets a track recording method. Auto records

the tracks at a variable rate to create an optimum

representation of your tracks.

Recording Interval: Sets a track log recording rate. Recording

points more frequently creates a more-detailed track, but fills

the track log faster.

Auto Archive: Sets an automatic archive method to organize

your tracks. Tracks are saved and cleared automatically.

Color: Changes the color of the track line on the map.

Changing the Units of Measure

You can customize units of measure for distance and speed,

elevation, depth, temperature, and pressure.

Select Setup > Units.

Select a measurement type.

Select a unit of measure for the setting.

Time Settings

Select Setup > Time.

Time Format: Sets the device to show time in a 12-hour or 24-

hour format.

Time Zone: Sets the time zone for the device. Automatic sets

the time zone automatically based on your GPS position.

Position Format Settings

NOTE: Do not change the position format or the map datum

coordinate system unless you are using a map or chart that

specifies a different position format.

Select Setup > Position Format.

Position Format: Sets the position format for the location

information.

Map Datum: Sets the coordinate system on which the map is

structured.

Map Spheroid: Shows the coordinate system the device is

using. The default coordinate system is WGS 84.

Heading Settings

You can customize the compass settings.

Select Setup > Heading.

Display: Sets the type of directional heading shown on the

compass.

North Reference: Sets the north reference used on the

compass.

Go To Line (Pointer): Sets the behavior of the pointer that

appears on the map. Bearing points in the direction of your

destination. Course shows your relationship to the course line

leading to the destination.

Compass: Automatically switches from an electronic compass

to a GPS compass when you are traveling at a higher rate of

speed for a period of time.

Calibrate Compass: Calibrates the compass (Calibrating the

Compass, page 7).

Altimeter Settings

Select Setup > Altimeter.

Auto Calibration: Automatically calibrates the altimeter each

time the device is turned on.

Barometer Mode: Sets how the device measures barometric

information. Variable Elevation allows the barometer to

measure changes in elevation while you are moving. Fixed

Elevation assumes the device is stationary at a fixed

elevation, so the barometric pressure should change only

due to weather.

10 Customizing Your Device

Pressure Trending: Sets how the device records pressure

data. Save Always records all pressure data, which can be

helpful when you are watching for pressure fronts.

Plot Type: Sets the type of data recorded and displayed in the

plot. Records elevation changes over a period of time or

distance, records barometric pressure over a period of time,

or records ambient pressure changes over a period of time.

Calibrate Altimeter: Calibrates the altimeter.

Geocaching Settings

Select Setup > Geocaches.

Geocache List: Allows you to display the geocache list by

names or codes.

Found Geocaches: Allows you to edit the number of geocaches

found. This number automatically increases as you log a find.

Filter Setup: Allows you to create and save custom filters for

geocaches based on specific factors (Creating and Saving a

Geocache Filter, page 8).

chirp Searching: Allows the device to search for a geocache

containing a chirp accessory (Enabling chirp Searching,

page 8).

Program chirp: Programs the chirp accessory. See the chirp

owner's manual at www.garmin.com.

Routing Settings

The device calculates routes optimized for the type of activity

you are doing. The routing settings available vary based on the

activity selected.

Select Setup > Routing.

Guidance Method: Sets the preference for optimizing route

calculation based on distance, time, on-road, or off-road

routing.

Calculate Routes for: Sets the mode of transportation for which

to calculate routes.

Lock On Road: Locks the position icon, which represents your

position on the map, onto the nearest road.

Off Road Transitions: Sets how the device routes from one

point on the route to the next. This setting is available only for

some activities. Distance routes you to the next point on the

route when you are within a specified distance of your current

point.

Avoidance Setup: Sets the road types to avoid while

navigating. This setting is available only for some activities.

Marine Map Settings

Select Setup > Marine.

Marine Chart Mode: Sets the type of chart the device uses.

Nautical displays various map features in different colors so

the marine POIs are more readable and so the map reflects

the drawing scheme of paper charts. Fishing (requires marine

maps) displays a detailed view of bottom contours and depth

soundings and simplifies map presentation for optimal use

while fishing.

Appearance: Sets the appearance of marine navigation aids on

the map.

Marine Alarm Setup: Sets alarms for when you exceed a

specified drift distance while anchored, when you are off

course by a specified distance, and when you enter water of

a specific depth.

Setting up Marine Alarms

From the main menu, select Setup > Marine > Marine Alarm

Setup.

Select an alarm type.

Select On.

Enter a distance.

Device Information

Viewing Device Information

You can view the unit ID, software version, and license

agreement.

Select Setup > About.

Support and Updates

• You can update software and maps for your handheld device

using Garmin Express

™

• You can update software for your dog collar device using

Garmin WebUpdater.

Support and Updates

Garmin Express ( www.garmin.com/express ) provides easy

access to these services for Garmin devices.

• Product registration

• Product manuals

• Software updates

• Map, chart, or course updates

Setting Up Garmin Express

Connect the device to your computer using a USB cable.

Go to www.garmin.com/express.

Follow the on-screen instructions.

Updating the Software

Before you can update the handheld device or collar software,

you must connect the handheld device (Connecting the

Handheld Device to a Computer, page 12) or the collar

(Connecting the Collar to a Computer, page 13) to the

computer.

You must update the software on the handheld device and collar

separately.

NOTE: Updating the software does not erase any of your data

or settings.

Go to www.garmin.com/products/webupdater.

Follow the on-screen instructions.

Device Care

NOTICE

Avoid chemical cleaners, solvents, and insect repellents that can

damage plastic components and finishes.

Do not store the device where prolonged exposure to extreme

temperatures can occur, because it can cause permanent

damage.

The device is water resistant to IEC Standard 60529 IPX7. It can

withstand accidental immersion in 1 meter of water for 30

minutes. Prolonged submersion can cause damage to the

device. After submersion, be certain to wipe dry and air dry the

device before using or charging.

Cleaning the Device

Wipe the device using a cloth dampened with a mild

detergent solution.

Wipe it dry.

After cleaning, allow the device to dry completely.

Cleaning the Screen

Before you can clean the screen, you should have a soft, clean,

lint-free cloth and water, isopropyl alcohol, or eyeglass lens

cleaner.

Device Information 11

Apply the liquid to the cloth, and gently wipe the screen with the

cloth.

Alpha 50 Handheld Device Specifications

Water rating IEC 60529 IPX7*

Battery type Two 1.5 V AA batteries (alkaline, NiMH,

or lithium)

Alkaline battery life Up to 15 hr., typical usage

NiMH or lithium battery life Up to 20 hr., typical usage

Operating temperature range From -20° to 70°C (from -4° to 158°F)

Charging temperature range From 0° to 50°C (from 32° to 122°F)

ANT+

wireless range 2 m (12 in.) or closer

VHF radio range (standard

antenna)

30 M (33 yd.)

VHF radio range (extended

antenna)

50 M (54 yd.)

*The device withstands incidental exposure to water of up to 1 m

for up to 30 min. For more information, go to www.garmin.com

/waterrating.

T5 Dog Collar Device Specifications

Battery type Internal rechargeable lithium-ion battery

Battery life From 20 to 40 hr.

Operating temperature range From -20° to 60°C (from -4° to 140°F)

Charging temperature range From 0° to 40°C (from 32° to 104°F )

ANT

wireless range Up to 10 m (32.8 ft.)

VHF radio range Up to 14.48 km (9 mi.)

Water rating 1 ATM*

*The device withstands pressure equivalent to a depth of 10 m.

For more information, go to www.garmin.com/waterrating.

T5 mini Dog Collar Device Specifications

Battery type Rechargeable, replaceable lithium-ion

Battery life Up to 16 to 30 hr., typical use

Operating temperature range From -20° to 60°C (from -4° to 140°F)

Charging temperature range From 5° to 40°C (from 41° to 104°F)

ANT wireless range Up to 5 m (16.4 ft.)

VHF radio range Up to 6.44 km (4 mi.)

Water rating 1 ATM*

*The device withstands pressure equivalent to a depth of 10 m.

For more information, go to www.garmin.com/waterrating.

Battery Information

WARNING

This product contains a lithium-ion battery. To prevent the

possibility of personal injury or product damage caused by

battery exposure to extreme heat, store the device out of direct

sunlight.

Do not use a sharp object to remove batteries.

The temperature rating for the device may exceed the usable

range of some batteries. Alkaline batteries can rupture at high

temperatures.

CAUTION

Contact your local waste disposal department to properly

recycle the batteries.

NOTICE

Alkaline batteries lose a significant amount of their capacity as

the temperature decreases. Use lithium batteries when

operating the device in below freezing conditions.

Long-Term Storage

NOTICE

The normal long-term decrease in the charging capacity of

lithium-ion batteries can be accelerated by exposure to elevated

temperatures. Storing a fully charged device in a location with a

temperature outside the long-term storage temperature range

can significantly reduce its recharging capacity.

When you do not plan to use the handheld device for several

months, the battery should be removed. Stored data is not lost

when the battery is removed.

When you do not plan to use the collar for several months, the

battery should be charged to about 50%. The device should be

stored in a cool, dry place with temperatures around the typical

household level. After storage, the collar should be fully

recharged before use.

Data Management

You can store files on your device. The device has a memory

card slot for additional data storage.

NOTE: The device is not compatible with Windows

95, 98, Me,

Windows NT

, and Mac

OS 10.3 and earlier.

File Types

The handheld device supports these file types.

• Files from BaseCamp. Go to www.garmin.com/trip_planning.

• JPEG photo files.

• GPX geocache files. Go to www.geocaching.com/play .

• GPI custom POI files from the Garmin POI Loader. Go to

www.garmin.com/products/poiloader.

Installing a Memory Card

WARNING

Do not use a sharp object to remove user-replaceable batteries.

You can install a microSD memory card in the handheld device

for additional storage or pre-loaded maps.

Turn the D-ring counter-clockwise, and pull up to remove the

cover.

Remove the battery.

Slide the card holder to the left and lift up.

Place the memory card with the gold contacts facing down.

Close the card holder.

Slide the card holder to the right to lock it.

Replace the battery and cover.

Connecting the Handheld Device to a Computer

NOTICE

To prevent corrosion, thoroughly dry the USB port, the weather

cap, and the surrounding area before charging or connecting to

a computer.

Lift the weather cap

12 Device Information

Plug the small end of the USB cable into the mini-USB

connector

on the device.

Plug the other end of the USB cable into an available USB

port on the computer.

Your device and memory card (optional) appear as

removable drives in My Computer on Windows computers

and as mounted volumes on Mac computers.

Connecting the Collar to a Computer

NOTICE

To prevent corrosion, you should dry the contacts on the collar

and the surrounding area before connecting the charging clip.

You can connect the collar to your computer to use with

programs like BaseCamp. The collar is not a mass storage

device.

Snap the charging clip onto the collar.

Plug the small end of the USB cable into the mini-USB port

on the charging clip cable.

Plug the other end of the USB cable into a USB port on the

computer.

Transferring Dog Tracks to BaseCamp

You can transfer the dog tracks to BaseCamp.

Connect the collar to the computer (Connecting the Collar to

a Computer, page 13).

The collar turns on automatically.

Select .

Open BaseCamp.

BaseCamp recognizes and transfers the collar's internal track

log.

Deleting Files

NOTICE

If you do not know the purpose of a file, do not delete it. Your

device memory contains important system files that should not

be deleted.

Open the Garmin drive or volume.

If necessary, open a folder or volume.

Select a file.

Press the Delete key on your keyboard.

Disconnecting the USB Cable

If your device is connected to your computer as a removable

drive or volume, you must safely disconnect your device from

your computer to avoid data loss. If your device is connected to

your Windows computer as a portable device, it is not necessary

to safely disconnect.

Complete an action:

• For Windows computers, select the Safely Remove

Hardware icon in the system tray, and select your device.

• For Mac computers, drag the volume icon to the trash.

Disconnect the cable from your computer.

Appendix

Accessories and Replacement Parts

Purchasing Accessories

Go to garmin.com/accessories.

Optional Maps

You can use additional maps with the device, such as BirdsEye

satellite imagery, BlueChart

g2, and City Navigator

detailed

maps. Detailed maps may contain additional points of interest,

such as restaurants or marine services. For more information,

go to http://buy.garmin.com or contact your Garmin dealer.

About Memory Cards

You can purchase memory cards from an electronics supplier,

or purchase pre-loaded Garmin mapping software

(www.garmin.com). In addition to map and data storage, the

memory card can be used to store files such as maps, images,

geocaches, routes, waypoints, and custom POIs.

Optional Fitness Accessories

You can use optional fitness accessories including a heart rate

monitor or a cadence sensor with your device. These

accessories use ANT+ wireless technology to send data to the

device.

Before you can use the fitness accessory with your device, you

must install the accessory according to the instructions included

with the accessory.

Using Optional Fitness Accessories

Bring the device within range 3 m (10 ft.) of the ANT+

accessory.

Select Setup > ANT Sensor.

Select Heart Rate Monitor, Bike Cadence Sensor, or

Tempe Sensor.

Select On, Off, or Search For New.

Customize the data fields to view the heart rate or cadence

data (Customizing the Data Fields, page 9.

Tips for Pairing ANT+ Accessories with Your Garmin Device

• Verify that the ANT+ accessory is compatible with your

Garmin device.

• Before you pair the ANT+ accessory with your Garmin

device, move 10 m (32.9 ft.) away from other ANT+

accessories.

• Bring the Garmin device within range 3 m (10 ft.) of the ANT+

accessory.

• After you pair the first time, your Garmin device automatically

recognizes the ANT+ accessory each time it is activated. This

process occurs automatically when you turn on the Garmin

device and only takes a few seconds when the accessories

are activated and functioning correctly.

• When paired, your Garmin device receives data from only

your accessory, and you can go near other accessories.

Appendix 13

Dog Device Battery Replacement Instructions

T5 Components

Back plate

Power key

Battery connector

Battery cover

Battery

Power connector

Removing the Old Battery

Before you replace the battery, you must remove all dirt, water,

and debris from the device. You must also have a small Phillips

screwdriver.

Remove the six screws from the outer edges of the back

plate.

NOTE: You should leave the two inner screws in place.

Pry off the back plate.

Disconnect the battery connector and power connector.

Remove the screws that secure the battery cover.

Remove the battery cover and the battery.

Remember the orientation of the battery. You must install the

new battery the same way.

After you remove the old battery, contact your local waste

disposal department to properly recycle the battery.

Installing the New Battery

Before you replace the battery, you must remove the old battery

(Removing the Old Battery, page 14). You also must have a

small Phillips screwdriver. You may need a small flat

screwdriver.

Install the new battery using the same orientation as the old

battery.

The connector

should face the end nearest the power key,

and the bump

where the wires connect to the battery

should face toward the side with the charging clip contacts.

Replace the battery cover.

Replace the screws to secure the battery cover.

Connect the battery connector and power connector.

You may need to use a flat screwdriver to help secure the

connectors.

Select the power key to test the connections.

When properly connected, a tone is emitted and the status

LED blinks green.

Turn off the device.

Verify the gasket located inside the bottom cover is fully

seated.

Replace the back plate.

Replace the six screws to secure the back plate.

After you install the new battery, charge the collar completely.

Replacing the T5 mini Dog Collar Device Battery

Before you can replace the battery, you must remove all dirt,

water, and debris from the device. You also need a small

Phillips screwdriver and the security screwdriver included in the

battery replacement kit.

Remove the screws from the L-shaped cover over the VHF

antenna.

Pry off the L-shaped cover.

Remove the screws from the outer edges of the back plate.

Pry off the back plate.

Grip the battery connector wires close to the connector, and

pull the connector perpendicular to the circuit board to

disconnect the battery connector from the device.

Grip the power connector wires close to the connector, and

pull the connector parallel to the circuit board to disconnect

the power connecter from the device.

Remove the screws from the battery plate.

Remove the battery plate.

Remove the battery.

The battery fits tightly. It may be necessary to pry the battery

out of the back plate using a non-sharp, non-metal object.

Install the new battery into the front enclosure with the label

side of the battery facing up, and the leading edge of the

battery placed under the charging contact ledge of the

device.

Replace the battery plate, and replace and tighten the two

screws.

14 Appendix

Verify the gasket is not damaged and is completely seated in

the groove.

Connect the battery connector and the power connector to

the device.

When properly installed, the connector plugs snap into the

ports.

Replace the back plate, and replace and tighten the screws

to secure the back plate.

Replace the L-shaped cover, and replace and tighten the

screws to secure the L-shaped plate.

Verify the gasket is not sticking out of the device.

Replacing the Collar Strap

Before you replace the collar strap, you must remove all dirt,

water, and debris from the device (Cleaning the Device,

page 11).

Pull the collar strap out of the GPS antenna, VHF antenna

guide, and the dog device.

You may need to push and pull the collar strap to properly

remove it. You may need to loosen the screw on the GPS

antenna case, but do not remove them.

Thread the new collar strap through the dog device, VHF

antenna guide, and GPS antenna.

If necessary, tighten the screws that secure the GPS antenna

case.

VHF Radio Information

This product may be used only on specific radio frequencies,

which vary depending on the country of use. The handheld

device and the dog device allow the user to install a different

antenna. Changing the antenna can result in improved radio

performance and higher radiated power. You must not use the

device with a third party antenna or an antenna not approved by

Garmin. Go to www.garmin.com/tracking-legal for details about

the performance and radio frequency of this product, lawful

accessories, and power limits for countries.

Replacing the VHF Antenna in the Handheld Device

Locate the VHF antenna (Alpha 50 Handheld Device,

page 1).

Rotate the VHF antenna counter-clockwise until it comes free

from the device.

Insert the replacement VHF antenna into the antenna port

and rotate the antenna clockwise by hand until it stops.

Replacing the VHF Antenna in the Dog Collar Device

NOTICE

Do not excessively bend the band that connects the main device

case with the GPS antenna.

When the cover is removed, do not disturb the sealant opposite

the VHF antenna, because this can damage the waterproof seal

of the dog collar device.

Before you replace the VHF antenna, you must remove all dirt,

water, and debris from the device. Also, you need a small

Phillips screwdriver.

Remove the 4 screws

from the cover over the VHF

antenna.

NOTE: You should note the location of the one short screw

Pry off the cover.

Remove the screw

securing the VHF antenna to the back

plate.

Pull the length of the antenna from the antenna guide to

remove the old antenna.

Loop the antenna guide around the collar strap, and thread

the new VHF antenna through the guide.

This helps to point the antenna up.

Replace the screw securing the VHF antenna to the back

plate.

Replace the cover over the VHF antenna.

Replace the 4 screws on the cover, replacing the short screw

in the correct location.

Changing the Fuse in the Vehicle Power Cable

NOTICE

When replacing the fuse, do not lose any of the small pieces

and make sure they are put back in the proper position. The

vehicle power cable does not work unless it is assembled

correctly.

If your device does not charge in your vehicle, you may need to

replace the fuse located at the tip of the vehicle adapter.

Rotate the end piece

counter clockwise to unlock it.

TIP: You may need to use a coin to remove the end piece.

Remove the end piece, the silver tip

, and the fuse

Insert a new fast-blow fuse that has the same current, such

as 1 A or 2 A.

Place the silver tip in the end piece.

Push in the end piece and rotate it clockwise to lock it back

into the vehicle power cable

Data Fields

Accuracy of GPS: The margin of error for your exact location.

For example, your GPS location is accurate to within +/- 12 ft.

(3.65 m).

Appendix 15

Ambient Pressure: The uncalibrated environmental pressure.

Ascent - Average: The average vertical distance of ascent

since the last reset.

Ascent - Maximum: The maximum rate of ascent in feet per

minute or meters per minute since the last reset.

Ascent - Total: The total elevation distance ascended since the

last reset.

Barometer: The calibrated current pressure.

Battery Level: The remaining battery power.

Bearing: The direction from your current location to a

destination. You must be navigating for this data to appear.

Cadence: The number of revolutions of the crank arm or

number of strides per minute. Your device must be

connected to a cadence accessory for this data to appear.

Course: The direction from your starting location to a

destination. Course can be viewed as a planned or set route.

You must be navigating for this data to appear.

Descent - Average: The average vertical distance of descent

since the last reset.

Descent - Maximum: The maximum rate of descent in feet per

minute or meters per minute since the last reset.

Descent - Total: The total elevation distance descended since

the last reset.

Distance to Dest.: The remaining distance to the final

destination. You must be navigating for this data to appear.

Distance to Next: The remaining distance to the next waypoint

on the route. You must be navigating for this data to appear.

Elevation: The altitude of your current location above or below

sea level.

Elevation - Maximum: The highest elevation reached since the

last reset.

Elevation - Minimum: The lowest elevation reached since the

last reset.

ETA at Destination: The estimated time of day when you will

reach the final destination (adjusted to the local time of the

destination). You must be navigating for this data to appear.

ETA at Next: The estimated time of day when you will reach the

next waypoint on the route (adjusted to the local time of the

waypoint). You must be navigating for this data to appear.

Glide Ratio: The ratio of horizontal distance traveled to the

change in vertical distance.

Glide Ratio to Dest: The glide ratio required to descend from

your current position to the destination elevation. You must

be navigating for this data to appear.

GPS Signal Strength: The strength of the GPS satellite signal.

Heading: The direction you are moving.

Heart Rate: Your heart rate in beats per minute (bpm). Your

device must be connected to a compatible heart rate monitor.

Location (lat/lon): The current position in latitude and longitude

regardless of the selected position format setting.

Location (selected): The current position using the selected

position format setting.

Odometer: A running tally of distance traveled for all trips. This

total does not clear when resetting the trip data.

Off Course: The distance to the left or right by which you have

strayed from the original path of travel. You must be

navigating for this data to appear.

Pointer: An arrow points in the direction of the next waypoint or

turn. You must be navigating for this data to appear.

Speed: The current rate of travel.

Speed - Maximum: The highest speed reached since the last

reset.

Speed - Moving Avg.: The average speed while moving since

the last reset.

Speed - Overall Avg.: The average speed while moving and

stopped since the last reset.

Sunrise: The time of sunrise based on your GPS position.

Sunset: The time of sunset based on your GPS position.

Time of Day: The current time of day based on your current

location and time settings (format, time zone, daylight saving

time).

Time to Destination: The estimated time remaining before you

reach the destination. You must be navigating for this data to

appear.

Time to Next: The estimated time remaining before you reach

the next waypoint in the route. You must be navigating for

this data to appear.

To Course: The direction in which you must move to get back

on the route. You must be navigating for this data to appear.

Trip Odometer: A running tally of the distance traveled since

the last reset.

Trip Time - Moving: A running tally of the time spent moving

since the last reset.

Trip Time - Stopped: A running tally of the time spent not

moving since the last reset.

Trip Time - Total: A running tally of the total time spent moving

and not moving since the last reset.

Turn: The angle of difference (in degrees) between the bearing

to your destination and your current course. L means turn

left. R means turn right. You must be navigating for this data

to appear.

Update Rate: The frequency at which the collar sends data to

the handheld device.

Velocity Made Good: The speed at which you are closing on a

destination along a route. You must be navigating for this

data to appear.

Vertical Speed: The rate of ascent or descent over time.

Vertical Speed to Dest: The rate of ascent or descent to a

predetermined altitude. You must be navigating for this data

to appear.

Waypoint at Dest: The last point on the route to the destination.

You must be navigating for this data to appear.

Waypoint at Next: The next point on the route. You must be

navigating for this data to appear.

Troubleshooting

My handheld device is not responding

If your handheld device stops responding, you can reset the

device.

NOTE: This does not erase any of your data or settings.

Remove the batteries.

Reinstall the batteries (Installing Batteries, page 1).

My dog collar devices have conflicting IDs

Each dog you track has its own ID number. If two dogs within

range of the handheld device have the same ID, the handheld

device warns you of a conflicting ID signal. Follow the on-screen

instructions to resolve the conflict.

When possible, you should allow the handheld device to

automatically assign IDs. If necessary, you can manually assign

a new ID number to a dog.

My handheld device does not report barks

NOTE: This feature is not available in all areas.

The bark detection feature does not work if the dog collar device

is not fitted correctly. You should position the device near the

16 Appendix

La pagina sta caricando ...

Garmin Alpha® 50 Manuale del proprietario

Marca: Garmin

Modello: Alpha® 50

Categoria: Cura degli animali

Tipo: Manuale del proprietario

Scarica il pdf

rapporto

in altre lingue

English: Garmin Alpha® 50 Owner's manual

Garmin Alpha® 50 Manuale del proprietario

Garmin Alpha® 50 Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti