JVC DLA-HD10K-SYS Manuale utente

Marca: JVC

Modello: DLA-HD10K-SYS

Categoria: Proiettori di dati

Tipo: Manuale utente

LCT1971-001A

For Customer use :

Enter below the serial No. which is located

on the side panel of the cabinet. Retain

this information for future reference.

Model No.

Serial No.

Pour utilisation par le client :

Entrer ci-dessous le N° de série qui est situé

sur le panneau latéral du coffret. Garder cette

information comme référence pour le futur.

N° de modèle

N° de série

HOME THEATER PROJECTOR

PROJECTEUR CINÉMA MAISON

DLA-HD10KU/E

DLA-HD10KSU/E

INSTRUCTIONS

MANUEL D’INSTRUCTIONS

ENTER

OFF

CHP

TEST

MENU EXIT

LIGHT

OPERATE

HIDE

PRESET

ZOOM

FOCUS

ENGLISH

DLA-HD10KU/DLA-HD10KSU

FRANÇAIS

DLA-HD10KU/DLA-HD10KSU

DLA-HD10_EN-FR.book Page 1 Thursday, November 10, 2005 12:54 PM

SAFETY PRECAUTIONS

IMPORTANT INFORMATION

About burning-in of the D-ILA device

Do not allow the same still picture to be projected for a

long time or an abnormally bright video picture to be pro-

jected. Do not project video images with high-intensity or

high contrast on a screen. The video image could be

burnt into the D-ILA device.

Use special care when projecting video games or com-

puter program images. There is no problem with ordinary

video-cassette playback images.

About the installation place

Do not install the projector in a place that cannot support

its weight securely.

If the installation place is not sturdy enough, the projector

could fall or overturn, possibly causing personal injury.

IMPORTANT SAFEGUARDS

Electrical energy can perform many useful functions. This

unit has been engineered and manufactured to assure

your personal safety. But IMPROPER USE CAN

RESULT IN POTENTIAL ELECTRICAL SHOCK OR

FIRE HAZARD. In order not to defeat the safeguards

incorporated into this product, observe the following basic

rules for its installation, use and service. Please read

these Important Safeguards carefully before use.

- All the safety and operating instructions should be read

before the product is operated.

- The safety and operating instructions should be retained

for future reference.

- All warnings on the product and in the operating instruc-

tions should be adhered to.

- All operating instructions should be followed.

- Place the projector near a wall outlet where the plug can

be easily unplugged.

- Unplug this product from the wall outlet before cleaning.

Do not use liquid cleaners or aerosol cleaners. Use a

damp cloth for cleaning.

- Do not use attachments not recommended by the product

manufacturer as they may be hazardous.

- Do not use this product near water. Do not use immedi-

ately after moving from a low temperature to high temper-

ature, as this causes condensation, which may result in

fire, electric shock, or other hazards.

- Do not place this product on an unstable cart, stand, or

table. The product may fall, causing serious injury to a

child or adult, and serious damage to the product. The

product should be mounted according to the manufac-

turer’s instructions, and should use a mount recom-

mended by the manufacturer.

- When the product is used on a cart,

care should be taken to avoid quick

stops, excessive force, and uneven sur-

faces which may cause the product and

cart to overturn, damaging equipment

or causing possible injury to the opera-

tor.

NOTICE (For USA)

Language for Manuals of Products using HID Lamps

(that contains mercury)

This product has a High Intensity Discharge (HID) lamp

that contains a small amount of mercury. It also con-

tains lead in some components.

Disposal of these materials may be regulated in your

community due to environmental considerations. For

disposal or recycling information please contact your

local authorities, or the Electronics Industries Alliance:

http://www.eiae.org.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

WARNING:

THIS APPARATUS MUST BE EARTHED.

CAUTION:

To reduce the risk of electric shock, do not remove

cover. Refer servicing to qualified service personnel.

This projector is equipped with a 3-blade grounding

type plug to satisfy FCC rule. If you are unable to insert

the plug into the outlet, contact your electrician.

FCC INFORMATION (U.S.A. only)

CAUTION:

Changes or modification not approved by JVC could

void the user’s authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply

with the limits for Class B digital devices, pursuant to

Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interfer-

ence in a residential installation. This equipment gener-

ates, uses, and can radiate radio frequency energy and,

if not installed and used in accordance with the instruc-

tions, may cause harmful interference to radio commu-

nications. However, there is no guarantee that

interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio

or television reception, which can be determined by

turning the equipment off and on, the user is encourage

to try to correct the interference by one or more of the

following measures:

● Reorient or relocate the receiving antenna.

● Increase the separation between the equipment and

receiver.

● Connect the equipment into an outlet on a circuit differ-

ent from that to which the receiver is connected.

● Consult the dealer or an experienced radio/TV techni-

cian for help.

MACHINE NOISE INFORMATION (Germany only)

Changes Machine Noise Information Ordinance 3.

GSGV, January 18, 1991: The sound pressure level at

the operator position is equal or less than 70 dB (A)

according to ISO 7779.

PORTABLE CART WARNING

(symbol provided by RETAC)

S3126A

DLA-HD10_EN-FR.book Page 2 Thursday, November 10, 2005 12:54 PM

- Slots and openings in the cabinet are provided for ventila-

tion. These ensure reliable operation of the product and

protect it from overheating. These openings must not be

blocked or covered. (The openings should never be

blocked by placing the product on bed, sofa, rug, or simi-

lar surface. It should not be placed in a built-in installation

such as a bookcase or rack unless proper ventilation is

provided and the manufacturer’s instructions have been

adhered to.) For proper ventilation, separate the product

from other equipment, which may prevent ventilation and

keep a distance of more than 11-7/8" (30 cm).

- This product should be operated only with the type of

power source indicated on the label. If you are not sure of

the type of power supply to your home, consult your prod-

uct dealer or local power company.

- This product is equipped with a three-wire plug. This plug

will fit only into a grounded power outlet. If you are unable

to insert the plug into the outlet, contact your electrician to

install the proper outlet. Do not defeat the safety purpose

of the grounded plug.

- Power-supply cords should be routed so that they are not

likely to be walked on or pinched by items placed upon or

against them. Pay particular attention to cords at doors,

plugs, receptacles, and the point where they exit from the

product.

- For added protection of this product during a lightning

storm, or when it is left unattended and unused for long

periods of time, unplug it from the wall outlet and discon-

nect the cable system. This will prevent damage to the

product due to lightning and power line surges.

- Do not overload wall outlets, extension cords, or conve-

nience receptacles on other equipment as this can result

in a risk of fire or electric shock.

- Never push objects of any kind into this product through

openings as they may touch dangerous voltage points or

short out parts that could result in a fire or electric shock.

Never spill liquid of any kind on the product.

- Do not attempt to service this product yourself as opening

or removing covers may expose you to dangerous volt-

ages and other hazards. Refer all service to qualified ser-

vice personnel.

Unplug this product from the wall outlet and refer service to

qualified service personnel under the following conditions:

a) When the power supply cord or plug is damaged.

b) If liquid has been spilled, or objects have fallen on the product.

c) If the product has been exposed to rain or water.

d) If the product does not operate normally by following the oper-

ating instructions. Adjust only those controls that are covered

by the Operation Manual, as an improper adjustment of con-

trols may result in damage and will often require extensive

work by a qualified technician to restore the product to normal

operation.

e) If the product has been dropped or damaged in any way.

f) When the product exhibits a distinct change in performance -

this indicates a need for service.

- When replacement parts are required, be sure the service

technician has used replacement parts specified by the

manufacturer or with same characteristics as the original

part. Unauthorized substitutions may result in fire, electric

shock, or other hazards.

Upon completion of any service or repairs to this product,

ask the service technician to perform safety checks to

determine that the product is in proper operating condition.

- The product should be placed more than one foot away

from heat sources such as radiators, heat registers,

stoves, and other products (including amplifiers) that pro-

duce heat.

- When connecting other products such as VCR’s, and per-

sonal computers, you should turn off the power of this

product for protection against electric shock.

- Do not place combustibles behind the cooling fan. For

example, cloth, paper, matches, aerosol cans or gas light-

ers that present special hazards when over heated.

- Do not look into the projection lens while the illumination

lamp is turned on. Exposure of your eyes to the strong

light can result in impaired eyesight.

- Do not look into the inside of this unit through vents (venti-

lation holes), etc. Do not look at the illumination lamp

directly by opening the cabinet while the illumination lamp

is turned on. The illumination lamp also contains ultravio-

let rays and the light is so powerful that your eyesight can

be impaired.

- Do not drop, hit, or damage the light-source lamp (lamp

unit) in any way. It may cause the light-source lamp to

break and lead to injuries. Do not use a damaged light

source lamp. If the light-source lamp is broken, ask your

dealer to repair it. Fragments from a broken light-source

lamp may cause injuries.

- The light-source lamp used in this projector is a high pres-

sure mercury lamp. Be careful when disposing of the light-

source lamp. If anything is unclear, please consult your

dealer.

- Do not ceiling-mount the projector to a place which tends

to vibrate; otherwise, the attaching fixture of the projector

could be broken by the vibration, possibly causing it to fall

or overturn, which could lead to personal injury.

Use only the accessory cord designed for this product to

prevent shock.

The power supply voltage rating of this product is

AC120 V, AC100 V – AC240 V, the power cord attached

conforms to the following power supply voltage. Use only

the power cord designated by our dealer to ensure Safety

and EMC.

When it is used by other power supply voltage, power

cable must be changed.

Ensure that the power cable used for the projector is the

correct type for the AC outlet in your country. Consult your

product dealer.

Power cord

For United Kingdom For European continent

countries

Power cord

Power supply voltage: AC 120 V

*DO NOT allow any unqualified person to install the unit.

Be sure to ask your dealer to install the unit (e.g.

attaching it to the ceiling) since special technical knowl-

edge and skills are required for installation. If installa-

tion is performed by an unqualified person, it may

cause personal injury or electrical shock.

ENGLISH

DLA-HD10_EN-FR.book Page 3 Thursday, November 10, 2005 12:54 PM

SAFETY PRECAUTIONS (continued)

POWER CONNECTION

(United Kingdom only)

WARNING:

Do not cut off the main plug from this equipment.

If the plug fitted is not suitable for the power points in

your home or the cable is too short to reach a power

point, then obtain an appropriate safety approved

extension lead or adapter or consult your dealer.

If nonetheless the mains plug is cut off, remove the fuse

and dispose of the plug immediately, to avoid a possible

shock hazard by inadvertent connection to the main

supply. If a new main plug has to be fitted, then follow

the instruction given below:

WARNING:

THIS APPARATUS MUST BE EARTHED. IMPOR-

TANT:

The wires in the mains lead on this product are colored

in accordance with the following cord:

Green-and-yellow : Earth

Blue : Neutral

Brown : Live

As these colors may not correspond with the colored

making identifying the terminals in your plug, proceed

as follows:

The wire which is colored green-and-yellow must be

connected to the terminal which is marked M with the

letter E or the safety earth or colored green or green-

and-yellow.

The wire which is colored blue must be connected to

the terminal which is marked with the letter N or colored

black.

The wire which is colored brown must be connected to

the terminal which is marked with the letter L or colored

red.

When replacing the fuse, be sure to use only a correctly

rated approved type, re-fit the fuse cover.

IF IN DOUBT —— CONSULT A COMPETENT ELEC-

TRICIAN.

How To Replace The Fuse

Open the fuse compartment with the blade screwdriver,

and replace the fuse.

(* An example is shown in the illustration below.)

WARNING:

Do not cut off the main plug from this equipment.

If the plug fitted is not suitable for the power points in

your home or the cable is too short to reach a power

point, then obtain an appropriate safety approved

extension lead or adapter or consult your dealer.

If nonetheless the mains plug is cut off, remove the fuse

and dispose of the plug immediately, to avoid a possible

shock hazard by inadvertent connection to the main

supply.

If a new main plug has to be fitted, then follow the

instruction given below:

WARNING:

THIS APPARATUS MUST BE EARTHED.

IMPORTANT:

The wires in the mains lead on this product are coloured

in accordance with the following cord:

Green-and-yellow : Earth

Blue : Neutral

Brown : Live

As these colours may not correspond with the coloured mak-

ing identifying the terminals in your plug, proceed as follows:

The wire which is coloured green-and-yellow must be con-

nected to the terminal which is marked

with the letter E or

the safety earth or coloured green or green-and-yellow.

The wire which is coloured blue must be connected to the ter-

minal which is marked with the letter N or coloured black.

The wire which is coloured brown must be connected to the

terminal which is marked with the letter L or coloured red.

When replacing the fuse, be sure to use only a correctly

rated approved type, re-fit the fuse cover.

IF IN DOUBT —— CONSULT A COMPETENT ELECTRICIAN.

How To Replace The Fuse

Open the fuse compartment with the blade screwdriver,

and replace the fuse.

(* An example is shown in the illustration below.)

Fuse

DLA-HD10_EN-FR.book Page 4 Thursday, November 10, 2005 12:54 PM

ENGLISH

Information for Users on Disposal of Old Equip-

ment

[European Union]

This symbol indicates that the electrical and electronic equipment

should not be disposed as general household waste at its end-of-

life. Instead, the product should be handed over to the applicable

collection point for the recycling of electrical and electronic equip-

ment for proper treatment, recovery and recycling in accordance

with your national legislation.

By disposing of this product correctly, you will help to conserve

natural resources and will help prevent potential negative effects

on the environment and human health which could otherwise be

caused by inappropriate waste handling of this product. For more

information about collection point and recycling of this product,

please contact your local municipal office, your household waste

disposal service or the shop where you purchased the product.

Penalties may be applicable for incorrect disposal of this waste, in

accordance with national legislation.

(Business users)

If you wish to dispose of this product, please visit our web page

www.jvc-europe.com

to obtain information about the take-back of

the product.

[Other Countries outside the European Union]

If you wish to dispose of this product, please do so in accordance

with applicable national legislation or other rules in your country

for the treatment of old electrical and electronic equipment.

DEUTSCH

Benutzerinformationen zur Entsorgung alter

Geräte

[Europäische Union]

Dieses Symbol zeigt an, dass das elektrische bzw. elektronische

Gerät nicht als normaler Haushaltsabfall entsorgt werden soll.

Stattdessen sollte das Produkt zur fachgerechten Entsorgung, Weit-

erverwendung und Wiederverwertung in Übereinstimmung mit der

Landesgesetzgebung einer entsprechenden Sammelstelle für das

Recycling elektrischer und elektronischer Geräte zugeführt werden.

Die korrekte Entsorgung dieses Produkts dient dem Umweltschutz

und verhindert mögliche Schäden für die Umwelt und die menschli-

che Gesundheit, welche durch unsachgemäße Behandlung des

Produkts auftreten können. Weitere Informationen zu Sammelstellen

und dem Recycling dieses Produkts erhalten Sie bei Ihrer

Gemeindeverwaltung, Ihrem örtlichen Entsorgungsunternehmen

oder in dem Geschäft, in dem Sie das Produkt gekauft haben.

Für die nicht fachgerechte Entsorgung dieses Abfalls können

gemäß der Landesgesetzgebung Strafen ausgesprochen werden.

(Geschäftskunden)

Wenn Sie dieses Produkt entsorgen möchten, besuchen Sie bitte

unsere Webseite www.jvc-europe.com

, um Informationen zur

Rücknahme des Produkts zu erhalten.

[Andere Länder außerhalb der Europäischen Union]

Wenn Sie dieses Produkt entsorgen möchten, halten Sie sich

dabei bitte an die entsprechenden Landesgesetze und andere

Regelungen in Ihrem Land zur Behandlung elektrischer und elek-

tronischer Geräte.

Attention:

This symbol is only

valid in the European

Union.

Hinweis:

Dieses Symbol ist nur

in der Europäischen

Uniongültig.

FRANÇAIS

Informations relatives à l’élimination des appar-

eils usagés, à l’intention des utilisateurs

[Union européenne]

Lorsque ce symbole figure sur un appareil électrique et électron-

ique, cela signifie qu’il ne doit pas être éliminé en tant que déchet

ménager à la fin de son cycle de vie. Le produit doit être porté au

point de pré-collecte approprié au recyclage des appareils élec-

triques et électroniques pour y subir un traitement, une récupéra-

tion et un recyclage, conformément à la législation nationale.

En éliminant correctement ce produit, vous contriburez à la con-

servation des ressources naturelles et à la prévention des éventu-

els effets négatifs sur l’environnement et la santé humaine,

pouvant être dus à la manipulation inappropriée des déchets de ce

produit. Pour plus d’informations sur le point de pré-collecte et le

recyclage de ce produit, contactez votre mairie, le service d’évacu-

ation des ordures ménagères ou le magasin dans lequel vous

avez acheté le produit.

Des amendes peuvent être infligées en cas d’élimination incor-

recte de ce produit, conformément à la législation nationale.

(Utilisateurs professionnels)

Si vous souhaitez éliminer ce produit, visitez notre page Web

www.jvc-europe.com

afin d’obtenir des informations sur sa

récupération.

[Pays ne faisant pas partie de l’Union européenne]

Si vous souhaitez éliminer ce produit, faites-le conformément à

la législation nationale ou autres règles en vigueur dans votre

pays pour le traitement des appareils électriques et électroniques

usagés.

NEDERLANDS

Informatie voor gebruikers over het weggooien

van oude apparatuur

[Europese Unie]

Deze markering geeft aan dat de elektrische en elektronische

apparatuur bij het einde van de gebruiksduur niet bij het

huishoudelijk afval mag worden gegooid. Het product moet in

plaats daarvan worden ingeleverd bij het relevante inzameling-

spunt voor hergebruik van elektrische en elektronische apparat-

uur, voor juiste verwerking, terugwinning en hergebruik in

overeenstemming met uw nationale wetgeving.

Door dit product naar het inzamelingspunt te brengen, werkt u

mee aan het behoud van natuurlijke hulpbronnen en met het

voorkomen van potentiële negatieve effecten op het milieu en de

volksgezondheid, die anders veroorzaakt zouden kunnen

worden door onjuiste afvalverwerking van dit product. Neem voor

meer informatie over inzamelingspunten en hergebruik van dit

product contact op met de gemeente in uw woonplaats, het afval-

verwerkingsbedrijf of de winkel waar u het product hebt aange-

schaft.

Er kunnen boetes gelden voor een onjuiste verwijdering van dit

afval, in overeenstemming met de nationale wetgeving.

(Zakelijke gebruikers)

Bezoek als u dit product wilt weggooien onze website www.jvc-

europe.com voor informatie over het terugnemen van het product.

[Landen buiten de Europese Unie]

Wanneer u dit product wilt verwijderen, houdt u dan aan de gel-

dende nationale wetgeving of andere regels in uw land voor de

verwerking van oude elektrische en elektronische apparatuur.

Attention:

Ce symbole n’est

reconnu que dans

l’Union européenne.

Let op:

Dit symbool is alleen

geldig in de

Europese Unie.

ENGLISH

DLA-HD10_EN-FR.book Page 5 Thursday, November 10, 2005 12:54 PM

SAFETY PRECAUTIONS (continued)

ESPAÑOL

Información para los usuarios sobre la elimi-

nación de equipos usados

[Unión Europea]

Este símbolo indica que los aparatos eléctricos y electrónicos no

deben desecharse junto con la basura doméstica al final de su vida

útil. El producto deberá llevarse al punto de recogida correspondi-

ente para el reciclaje y el tratamiento adecuado de equipos eléctri-

cos y electrónicos de conformidad con la legislación nacional.

Si desecha el producto correctamente, estará contribuyendo a

conservar los recursos naturales y a prevenir los posibles efec-

tos negativos en el medio ambiente y en la salud de las personas

que podría causar el tratamiento inadecuado del producto

desechado. Para obtener más información sobre el punto de rec-

ogida y el reciclaje de este producto, póngase en contacto con

su oficina municipal, su servicio de recogida de basura domés-

tica o la tienda en la que haya adquirido el producto.

De acuerdo con la legislación nacional, podrían aplicarse multas

por la eliminación incorrecta de estos desechos.

(Empresas)

Si desea desechar este producto, visite nuestra página Web

www.jvc-europe.com

para obtener información acerca de la reti-

rada del producto.

[Otros países no pertenecientes a la Unión

Europea]

Si desea desechar este producto, hágalo de conformidad con la

legislación nacional vigente u otras normativas de su país para el

tratamiento de equipos eléctricos y electrónicos usados.

ITALIANO

Informazioni per gli utenti sullo smaltimento

delle apparecchiature obsolete

[Unione Europea]

Questo simbolo indica che l’apparecchiatura elettrica ed elettronica

a cui è relativo non deve essere smaltita tra i rifiuti domestici generici

alla fine della sua vita utile. Il prodotto, invece, va consegnato a un

punto di raccolta appropriato per il riciclaggio di apparecchiature

elettriche ed elettroniche, per il trattamento, il recupero e il riciclaggio

corretti, in conformità alle proprie normative nazionali.

Mediante lo smaltimento corretto di questo prodotto, si contribuirà a

preservare le risorse naturali e a prevenire potenziali effetti negativi

sull'ambiente e sulla salute umana che potrebbero essere provocati,

altrimenti, da uno smaltimento inappropriato del prodotto. Per ulteri-

ori informazioni sul punto di raccolta e il riciclaggio di questo pro-

dotto, contattare la sede comunale locale, il servizio di smaltimento

rifiuti domestici o il negozio in cui si è acquistato il prodotto.

L’utente è responsabile del conferimento dell’apparecchio a fina

vita alle appropriate strutture di raccolta, pena le sanzioni pre-

viste dalla vigente legislazione sui rifiuti.

(Per gli utenti aziendali)

Qualora si desideri smaltire questo prodotto, visitare la nostra

pagina web

www.jvc-europe.com

per ottenere informazioni sul

ritiro del prodotto.

[Per altre nazioni al di fuori dell'Unione Europea]

Qualora si desideri smaltire questo prodotto, effettuare lo smalti-

mento in conformità alla normativa nazionale applicabile o alle

altre leggi della propria nazione relative al trattamento delle

apparecchiature elettriche ed elettroniche obsolete.

Atención:

Este símbolo sólo es

válido en la Unión

Europea.

Attenzione:

Questo simbolo è

valido solo nell'Unione

Europea.

PORTUGUÊS

Informações para os Utilizadores sobre a Elimi-

nação de Equipamento Antigo

[União Europeia]

Este símbolo indica que o equipamento eléctrico e electrónico

não deve ser eliminado como um resíduo doméstico geral, no

fim da respectiva vida útil. Pelo contrário, o produto deve ser

entregue num ponto de recolha apropriado, para efectuar a reci-

clagem de equipamento eléctrico e electrónico e aplicar o trata-

mento, recuperação e reciclagem adequados, de acordo com a

respectiva legislação nacional.

Ao eliminar este produto da forma correcta, ajudará a conservar

recursos naturais e ajudará a evitar potenciais efeitos negativos

no ambiente e saúde humana, que poderiam ser causados pelo

tratamento residual inadequado deste produto. Para mais infor-

mações sobre o ponto de recolha e reciclagem deste produto,

contacte a respectiva entidade local, o serviço de eliminação de

resíduos ou a loja onde adquiriu o produto.

Caso estes resíduos não sejam correctamente eliminados,

poderão ser aplicadas penalizações, em conformidade com a

respectiva legislação nacional.

(utilizadores profissionais)

Se pretender eliminar este produto, visite a nossa página da web

em www.jvc-europe.com

para obter informações sobre a dev-

olução do produto.

[Outros países fora da União Europeia]

Se pretender eliminar este produto, faça-o de acordo com a leg-

islação nacional aplicável ou outras regras no seu país para o

tratamento de equipamento eléctrico e electrónico velho.

ΕΛΛΗΝΙΚΑ

Πληροφορίες σχετικά µε την απόρριψη

εξοπλισµού

[Ευρωπαϊκή Ένωση]

Αυτή η σήµανση υποδηλώνει ότι ο ηλεκτρικός και ηλεκτρονικός

εξοπλισµός δεν πρέπει να απορριφθεί ως κοινό οικιακό

απόρριµµα. Αντ' αυτού, το προϊόν πρέπει να παραδοθεί στο

ανάλογο σηµείο περισυλλογής για την ανακύκλωση των

ηλεκτρικών και ηλεκτρονικών µερών και την κατάλληλη

επεξεργασία, σύµφωνα µε τη νοµοθεσία της ώρας σας.

Η σωστή απόρριψη αυτού το προϊόντος βοηθάει στη διαφύλαξη

των φυσικών πόρων και στην αποφυγή αρνητικών επιπτώσεων

στο περιβάλλον και στην ανθρώπινη υγεία, κάτι που ενδέχεται να

προκληθεί από την ακατάλληλη διαχείριση αυτού του προϊόντος

ως απρριµµα. Για περισσότερες πληροφορίες σχετικά µε τα

σηµεία περισυλλογής και ανακύκλωσης αυτού του προϊόντος,

επικοινωνήστε µε τα γραφεία της τοπικής αυτοδιοίκησης, την

υπηρεσία περισυλλογής απορριµµάτων ή το κατάστηµα από το

οποίο αγοράσατε το προϊόν.

Ανάλογα µε τη νοµοθεσία της χώρας σας, ενδέχεται να

επιβληθούν κυρώσεις σε περίπτωση λανθασµένης απόρριψης

αυτού του προόϊντος.

(Επιχειρήσεις)

Αν επιθυµείτε να απορρίψετε αυτό το προϊόν, επισκεφτείτε το

διαδικτυακό µας τόπο www.jvc-europe.com

για περισσότερες

πληροφορίες σχετικά µε την επιστροφή του προϊόντος.

[Άλλες χώρες εκτός Ευρωπαϊκής Ένωσης]

Αν επιθυµείτε να απορρίψετε αυτό το προϊόν, πρέπει να

τηρήσετε την ισχύουσα εθνική νοµοθεσία ή όποιους άλλους

κανονισµούς για τη χώρα σας για την απόρριψη ηλεκτρικού και

ηλεκτρονικού εξοπλισµού.

Atenção:

Este símbolo apenas

é válido na União

Europeia.

Προσοχή:

Αυτή η σήµανση ισχύει

µόνο για την

Ευρωπαϊκή Ένωση.

DLA-HD10_EN-FR.book Page 6 Thursday, November 10, 2005 12:54 PM

DANSK

Brugerinformation om bortskaffelse af gammelt

udstyr

[EU]

Elektriske produkter og elektroniske apparater med dette symbol

må ikke afhændes på samme måde som almindeligt husholdn-

ingsaffald, når det skal smides ud. I stedet skal produktet indle-

veres på det relevante indsamlingssted for elektriske apparater

og elektronisk udstyr, hvor det vil blive håndteret korrekt og efter-

følgende genanvendt og recirkuleret i henhold til de love, der

gælder i dit land.

Ved at bortskaffe dette produkt korrekt, medvirker du til at bevare

naturens ressourcer samt forhindre eventuelle negative

påvirkninger af miljøet og folkesundheden, der ellers kunne forår-

sages ved forkert affaldshåndtering af dette produkt. Mere infor-

mation om indsamlingssteder og genanvendelse af dette produkt

kan du få ved at kontakte din lokale kommune, dit renovations-

selskab eller den forretning, hvor du har købt produktet.

Ukorrekt bortskaffelse af dette affald kan være strafbar ifølge lov-

givningen i nogle lande.

(Professionelle brugere)

Hvis du ønsker at bortskaffe dette produkt, kan du på vores web-

side www.jvc-europe.com

få information om tilbagetagning af

produktet.

[Lande uden for EU]

Hvis du ønsker at bortskaffe dette produkt, bedes du gøre det i

overensstemmelse med gældende lovgivning eller andre regler i

dit land for behandling af gammelt elektrisk og elektronisk udstyr.

SUOMI

Tietoja käyttäjille vanhojen laitteiden hävittämis-

estä

[Euroopan unioni]

Tämä symboli tarkoittaa, että sähkö- ja elektroniikkalaitteita ei

tule laittaa talousjätteisiin, kun ne poistetaan käytöstä. Sen sijaan

tuotteet tulee toimittaa asianmukaiseen sähkö- ja elektroni-

ikkalaitteiden kierrätyspisteeseen, jossa ne käsitellään

uusiokäyttöä ja kierrätystä varten paikallisen lainsäädännön

mukaan.

Kun hävität tuotteen asianmukaisella tavalla, autat säästämään

luonnonvaroja ja estämään mahdollisia ympäristö- ja terveyshait-

toja, joita voisi aiheutua tämän tuotteen vääränlaisesta hävit-

tämisestä. Lisätietoja keräyspisteistä ja tämän tuotteen

kierrätyksestä saat paikkakuntasi viranomaisilta, kotitalousjät-

teiden keräyksestä huolehtivasta yrityksestä tai liikkeestä, josta

ostit tuotteen.

Tuotteen vääränlaisesta hävittämisestä voi seurata paikallisen

lainsäädännön mukaisia rangaistuksia.

(Yrityskäyttäjät)

Jos haluat hävittää tämän tuotteen, web-sivustoltamme osoit-

teessa www.jvc-europe.com

löydät tietoja käytetyn tuotteen

palautuksesta.

[Muut maat Euroopan unionin ulkopuolella]

Jos haluat hävittää tämän tuotteen, tee se kansallisen lain-

säädännön tai muiden maassasi voimassa olevien määräysten

mukaan, jotka koskevat vanhojen sähkö- ja elektroniikkalait-

teiden käsittelyä.

Bemærk:

Dette symbol er kun

gyldigt i EU.

Huomio:

Tämä symboli on voi-

massa vain Euroopan

unionissa.

SVENSKA

Information till användare gällande kassering av

gammal utrustning

[Europeiska gemenskapen]

Denna symbol anger att elektrisk och elektronisk utrustning inte

ska kasseras som vanligt hushållsavfall, när de inte ska använ-

das mer. Istället ska produkten lämnas in på lämplig återvin-

ningsstation för elektrisk eller elektronisk utrustning, så att den

kan tas om hand och återvinnas i enlighet med ert lands lagstift-

ning.

Genom att avyttra denna profukt på rätt sätt, bidrar du till att bev-

ara naturen och förhindrar potentiellt negativa effekter på miljön

och den mänskiliga hälsan, som annars kan bli resultatet vid

felaktig hantering av denna produkt. Kontakta ditt kommunkon-

tor, det företag som hanterar dina hushållssopor eller butiken där

du köpt produkten, för mer information om återvinningscentraler.

Det kan hända att du bötfälls i enlighet med ert lands lagstiftning

om detta avfall kasseras på fel sätt.

(Företagsanvändare)

Om ni vill kassera denna produkt, besök vår webbsida www.jvc-

europe.com för att få information om returnering av produkten.

[Övriga länder utanför den Europeiska

gemenskapen]

Om du vill kassera denna produkt, ska detta göras i enlighet med

gällande lagstiftning i landet, eller enligt andra bestämmelser i

ditt land, för behandling av gammal elektrisk eller elektronisk

utrustning.

NORSK

Informasjon til brukerne om kassering av gam-

melt utstyr

[Europeiske Union]

Dette symbolet betyr at det elektriske eller elektroniske utstyret

ikke skal kasseres som vanlig husholdningsavfall når det har

nådd slutten av sin levetid. I stedet skal produktet leveres til en

passende mottaksstasjon for kasserte elektriske og elektroniske

produkter, slik at disse kan behandles, gjenvinnes og resirkul-

eres i samsvar med nasjonal lovgivning.

Hvis du kasserer dette produktet på riktig måte, bidrar til du til å

bevare naturlige ressurser og til å motvirke de negative virknin-

gene på miljøet og den menneskelige helse som kan oppstå hvis

produktet kasseres på feil måte. Hvis du vil ha mer informasjon

om mottaksstasjoner og gjennvinning av dette produktet, kan du

ta kontakt med kommunen din, renovasjosselskapet ditt eller den

forhandleren du kjøpte produktet av.

Feilaktig kassering av dette utstyret kan kanskje bøtelegges,

avhengig av nasjonale lover og regler.

(Bedriftsbrukere)

Hvis du ønsker å kassere dette produktet, kan du gå til hjemmes-

iden vår på www.jvc-europe.com

eller www.elretur.no for å få

informasjon om retur av dette produktet.

[Andre land utenfor EU]

Hvis du ønsker å kassere dette produktet, må du gjøre det i

samsvar med gjeldende nasjonal lovgivning eller andre regler

som gjelder i landet ditt når det gjelder behandling av gammelt

elektrisk og elektronisk utstyr.

Tänk på:

Att denna symbol

endast gäller inom den

Europeiska

gemenskapen.

OBS!

Dette symbolet er kun

gyldig i den Europeiske

Union og i EFTA-lan-

dene Norge, Island og

ENGLISH

DLA-HD10_EN-FR.book Page 7 Thursday, November 10, 2005 12:54 PM

SAFETY PRECAUTIONS (continued)

РУССКИЙ

Информация для пользователей,

выбрасывающих старое оборудование

[Европейский Союз]

Это символ указывает, что после окончания срока службы

соответствующего электрического или электронного

оборудования, нельзя выбрасывать его вместе с обычным

бытовым мусором. Вместо этого, оно подлежит сдаче на

утилизацию в соответствующий пункт приема

электрического и электронного оборудования для

последующей переработки и утилизации в соответствии с

национальным законодательством.

Обеспечивая правильную утилизацию данного продукта,

Вы помогаете сберечь природные ресурсы и

предотвращаете ущерб для окружающей среды и здоровья

людей, который возможен в случае ненадлежащего

обращения. Более подробную информацию о пунктах

приема и утилизации данного продукта можно получить в

местных муниципальных органах, на предприятии по вывозу

бытового мусора или по месту приобретения продукта.

Нарушение правил утилизации данного типа отходов в

соответствии с национальным законодательством является

административным правонарушением.

(Организации-пользователи)

Прежде чем выбрасывать данный продукт, ознакомьтесь с

информацией о приемке отработавших продуктов,

приведенной на веб-узле www.jvc-europe.com

[Страны, не входящие в Европейский Союз]

Если Вы собираетесь выбросить данный продукт,

руководствуйтесь национальным законодательством или

другими правилами, действующими в Вашей стране по

отношению к переработке старого электрического и

электронного оборудования.

Внимание:

Действие этого

символа

распространяется

только на Европейский

DLA-HD10_EN-FR.book Page 8 Thursday, November 10, 2005 12:54 PM

Caution

About Burning-in of D-ILA Device

oDo not allow the same still picture to be

projected for a long time or an abnormally bright

video image to be projected

Do not project still images, etc. with a high intensity or

high contrast on the screen for a long time. This video

image could be burnt into this D-ILA device.

Pay special attention when projecting video games and

computer program images.

There is no problem with ordinary video cassette

playback images.

Viewing Conditions (Brightness of Room)

oBrightness of the room

Avoid direct exposure of screen to direct sunlight and

illumination. Block light using a curtain. Images can be

well projected by darkening the brightness of the room.

oDo not view screen for prolonged hours

Looking at the screen continually for a prolonged time

will cause your eyes to get tired. Allow your eyes to rest

at intervals.

oDo not use this unit when image flickers

This may cause your eyesight to deteriorate.

Environment of Use

oDo not use this unit in rooms with cigarette

smoke or oily smoke

Do not use this unit in rooms with cigarette smoke or

oily smoke. This may cause the unit to malfunction.

oWhen mounting this unit to the ceiling

Check temperature around the unit.

When a heater is in use, the ceiling may reach a

temperature higher than anticipated, hence leading to

malfunction of the unit.

Maintenance Procedures

oClean dirt on the cabinet

with a soft cloth. In case of heavy soiling, soak a cloth in

neutral detergent diluted with water, wring dry and

wipe, followed by wiping again using a dry cloth.

oPay attention to the following as the cabinet may

deteriorate in condition, get damaged or paint

may come off.

● Do not wipe with a stiff cloth

● Do not wipe with force

● Do not wipe with thinner or benzene

● Do not spray volatile chemicals like insecticide

● Do not allow prolonged contact with rubber or plastic

products

oDirt on the lens

shall be cleaned using commercial blowers or lens

cleaning papers (for cleaning glasses and cameras).

Do not use fluid-type cleaning agents. This may lead to

peeling of the surface coating film.

Lens surface is fragile. Avoid rubbing it hard or

knocking it.

Standard for gauging replacement time of components

There are replacement components required for maintenance of the functions of this product such as optical components,

cooling fan and filters. Life span of components varies considerably with the frequency of use and environment in which

they are used. For replacement of components (except filters), please consult your authorized dealer.

ENGLISH

DLA-HD10_EN-FR.book Page 9 Thursday, November 10, 2005 12:54 PM

Contents

SAFETY PRECAUTIONS .........................................2

Caution .....................................................................9

Accessories ...........................................................10

Accessories ........................................................... 10

Optional Accessories ............................................. 10

Controls and Features ..........................................11

Front Side/Top Surface/Bottom Surface ................ 11

Rear Side/Right Side ............................................. 12

Control Panel ......................................................... 13

Indicators ............................................................... 14

Indicator Display .................................................... 15

Remote Control ..................................................... 16

Loading Batteries into the Remote Control ............ 17

Installing the Projector .........................................18

Precautions for Installation .................................... 18

Mounting this Unit .................................................. 19

Projector and Screen Installation ........................... 20

Screen Size and Projection Distance .................... 21

Lens Shift Setting .................................................. 22

Effective Range of Remote Control Unit ................ 23

Connecting to Various Devices ...........................24

Connecting to Devices ........................................... 24

Connecting the Power Cord (Supplied) ................. 25

Basic Operation Procedures ............................... 26

Adjustments and Settings Using Menus ............ 28

Menu Structure ......................................................28

Menu Operation Buttons ........................................29

Procedures for Menu Operation .............................30

Menu Configuration ................................................31

Screen Masking .................................................... 33

Picture Shift Setting ............................................. 34

Replacing the Lamp ............................................. 35

Light-source Lamp and Lamp Usage Time ............35

Procedure for Lamp Replacement .........................36

Resetting Lamp Time .............................................38

Cleaning and Replacing the Filter ...................... 39

What to do when these messages

are displayed ................................................... 40

Warning Indication ............................................... 41

Troubleshooting ................................................... 42

Terminal Description ........................................... 44

Pin Arrangement ....................................................44

RS-232C External Control .....................................45

Specifications ....................................................... 47

Accessories

The following accessories are packed together with this unit. Please confirm all items.

If any item is missing, please contact your dealer.

Please seek your authorized dealer for details.

oReplacement Lamp : BHL5008-S (Lamp Unit)

oReplacement Filter : LC32058-002A (Inner Filter)

Accessories

Instructions ............................................................................................................................................................x 1

Guarantee...............................................................................................................................................................x 1

Power Cord.............................................................................................................................................................x 1

Remote Control (RM-MH10KG).............................................................................................................................x 1

AAA size Batteries (for operation confirmation) ................................................................................................x 2

Optional Accessories

DLA-HD10_EN-FR.book Page 10 Thursday, November 10, 2005 12:54 PM

Controls and Features

A Indicator

Please refer to AIndicatorsB (A Page 14) for details.

B Air Inlets (2 in front and 1 at bottom surface)

The air inlets absorb air to cool the interior of the unit.

Do not block or allow warm air to blow into them. This

may cause the unit to malfunction.

C Power Zoom Lens

DLA-HD10KU/E :1.9x power zoom lens

DLA-HD10KSU/E:1.4x power zoom lens

● Before projection, remove the lens cap. (A Page 26)

D Remote Sensor (Front)

When operating with the remote control, aim it

towards the sensor. (A Page 23)

● A remote sensor is also located on the rear of the unit.

E Lens Cap

● Fit the cap on the lens when this unit is not in use to

prevent the lens from becoming dirty. (A Page 26)

F Lens Shift Cover

Remove this cover when using the Lens Shift feature

for shifting the projecting position in the vertical

direction. (A Page 22)

G Foot

It is set at the lowest position when shipped from the

factory. This unit does not come with a function to

adjust the gradient.

H Filter

Cleans air drawn in from the air inlet. Please clean this

filter regularly. (A Page 39)

Front Side/Top Surface/Bottom Surface

Bottom Surface

ENGLISH

DLA-HD10_EN-FR.book Page 11 Thursday, November 10, 2005 12:54 PM

Controls and Features (continued)

A Control Panel Cover

Remove this cover when operating this unit or when

replacing the lamp unit.

● Unlock the cover, followed by sliding it downwards to

remove it.

● Please refer to page 13 for details on the control panel.

B Exhaust Vent

Warm air is expelled through this vent to keep the

system cool. Do not block the exhaust vents. This

may cause the unit to malfunction.

C AC Power Input Terminal

This is the AC power input terminal. Connect the

supplied cord to this terminal. (A Page 25)

D Remote Sensor (Rear)

When operating with the remote control, aim it

towards the sensor. (A Page 23)

● A remote sensor is also located at the front of the unit.

E SCREEN TRIGGER Terminal

This terminal is used for controlling the SCREEN

TRIGGER-compatible elevating screen. An output at

DC +12 V/100 mA (max.) is produced when the power

is on.

● Consult a qualified technician for a connection with the

screen.

F [SERVICE] Terminal

This terminal is intended for servicing purposes. Do

not use it. Using it may give rise to error and

malfunction of the unit.

G [RS-232C] Terminal (D-sub 9 Pin)

This is the RS-232C interface-specific terminal. This

unit can be controlled by a computer connected

externally. (A Pages 24, 45)

● For details, please check with your authorized dealer.

H [DVI] Terminal (DVI-D 24 Pin)

This is an input terminal for video signals. Video

signals that can be input are 1080/50p and 1080/60p

signals. (A Page 24)

Rear Side/Right Side

DVI

RS-232C

SCREEN TRIGGER SERVICE

EF G HD

Removing the control

panel cover

Lock

Release

Handling the Control Panel Cover

● The gap between this unit and the control panel

cover is narrow. Be careful not to stick your finger

into the gap between this unit and the control panel

cover.

● Be careful of the protrusions and corners of

components to avoid injury.

● After attaching the control panel cover, check that

the lock is fastened. The control panel cover may

drop and cause injury.

DLA-HD10_EN-FR.book Page 12 Thursday, November 10, 2005 12:54 PM

A [Rx/Tx] Indicator

This indicator lights up during communication with the

computer using the RS-232C terminal. (A Page 15)

[Rx] : Lights up when this unit is receiving RS-232C

data.

[Tx] : Lights up when this unit is sending RS-232C

data.

B [MENU] Button

Press this button to display the menu. Pressing this

button when the menu is displayed clears the menu.

(A Pages 29, 30)

C [EXIT] Button

Press this button to return to the previous hierarchical

menu (for example, to return from submenu to main

menu). Pressing this button when the main menu is

displayed clears the menu. (A Pages 29, 30)

D [ZOOM T/W] Button

Press this button to change the size of the projected

image. (A Page 26)

E [FOCUS +/-] Button

Press this button to adjust focus of the projected

image. (A Page 27)

F Cursor [J / K / H / I] Buttons

Use these buttons when adjusting the menu items.

(A Pages 29, 30)

G [ENTER] Button

Press this button to show the next hierarchical menu

(for example, to enter submenu from main menu). It is

also used when AENTERB is displayed against a

selection item on the menu screen. (A Pages 29, 30)

H [OPERATE ON] Button

When this unit is in the standby mode, pressing this

button for more than 1 second will turn the unit on and

cause the [OPERATE] indicator to light up.

(A Page 26)

I [OPERATE OFF] Button

When this unit is operating (projecting), pressing this

button for more than 1 second switches the unit to the

cool down mode, which will automatically switch to the

standby mode after about 60 seconds. (A Page 27)

● The [OPERATE OFF] button will not work within

approximately 1 minute after the light source has been

turned on. Start operation only after 1 minute’s time.

J [HIDE] Button

Use this button to temporarily clear the video image.

Press again to resume. (A Page 27)

Control Panel

ZOOM

FOCUS

MENU EXIT

OPERATE

OFF

HIDE

RS232C Rx

ABC

DE F G

ENGLISH

DLA-HD10_EN-FR.book Page 13 Thursday, November 10, 2005 12:54 PM

Controls and Features (continued)

A [STAND BY] Indicator

Light on : When in the standby mode.

(A Pages 15, 26)

Blinking : When in the cool down mode.

(A Pages 15, 27)

B [OPERATE] Indicator

Light on : When this unit is currently operating

(projecting). (A Pages 15, 26)

C [LAMP] Button

Light on : When the lamp needs to be replaced soon

or immediately. (A Page 15)

When the lamp cover is removed.

(A Page 41)

When the lamp does not light up and the

unit is unable to project, or when the lamp

goes off during projection. (A Page 41)

D [TEMP] Indicator

Light on : When the internal temperature of the unit is

abnormally high. (A Page 41)

Blinking : When the lamp needs to be replaced soon

or immediately. (A Page 15)

When an abnormality has occurred in this

unit. (A Page 41)

E [FAN] Indicator

Light on : When the internal fan abnormally stopped

running. (A Page 41)

Blinking : When the lamp has reached the end of its

life and it is time to replace the lamp.

(A Page 15)

When an abnormality has occurred in this

unit. (A Page 41)

F [HIDE] Indicator

Light on : When the video image is temporarily

cleared upon pressing the [HIDE] button.

(A Pages 15, 27)

Blinking : When an abnormality has occurred in this

unit. (A Page 41)

Indicators

STAND BY

OPERATE

LAMP

TEMP

FAN

HIDE

DLA-HD10_EN-FR.book Page 14 Thursday, November 10, 2005 12:54 PM

This unit displays operational states using different combination of indicators.

● Please refer to page 35 for explanations on warning indication for

● Please refer to page 41 for indications when an abnormality occurs in this unit.

Indicator Display on the Top Surface

Indicator Display on the Control Panel

Indicator Display

Indicator

Description

STAND BY OPERATE LAMP TEMP FAN HIDE

Light On ^^^^^Unit is in standby mode

^ Light On ^^^^Unit is in operate mode (during projection)

^ Light On ^^^Light On

When the video image is temporarily cleared

upon pressing the [HIDE] button during

projection

Blinking ^^^^^

Unit is in cool down mode

(when cooling lamp)

^^Light On Blinking ^^

About time to replace lamp

(Lamp usage time has exceeded 1900 hours)

^^Light On ^ Blinking ^

Lamp life has expired

(Lamp usage time has exceeded 2000 hours)

^^Light On Blinking Blinking ^

When unit is forced to switch to cool down

mode

Time to replace lamp

(Lamp usage time has exceeded 2010 hours)

Indicator

Description

Rx Tx

Light On ^ When this unit is receiving RS-232C data

^ Light On When this unit is sending RS-232C data

About Cool Down Mode

After projection, the heated lamp will go through a 60-

second cool-down process known as the cool down

mode. This function is to prevent damage and

deformation that heat from the heated lamp may cause

to the internal components of this unit. It also prevents

lamp breakage and shortened lamp life.

The cool down mode is indicated by the blinking

[STAND BY] indicator. When in the cool down mode, the

[OPERATE ON] button will be disabled.

After the cool down process is completed, the unit will

automatically switch to the standby mode.

CAUTION:

When in the cool down mode, do not pull out the plug

from the power outlet. Also, do not block the air inlets/

exhaust vents by standing this unit on its end or laying it

on its side.

ENGLISH

DLA-HD10_EN-FR.book Page 15 Thursday, November 10, 2005 12:54 PM

Controls and Features (continued)

A Remote Control’s Signal Transmitter

(A Page 23)

B [OPERATE ON] Button

When this unit is in the standby mode, pressing this

button for more than 1 second will turn the unit on and

cause the [OPERATE] indicator to light up.

(A Page 26)

C [LIGHT] Button

Lights up illumination (light) of the remote control

buttons for about 10 seconds.

D [CHP] (Cross Hatch Pattern) Button

Press this button to adjust the focus. Pressing this

button projects a green cross hatch signal for

adjustment.

● Press the [EXIT] button to return to the original image.

E [MENU] Button

Press this button to display the menu. Pressing this

button when the menu is displayed clears the menu.

(A Pages 29, 30)

F Cursor [J / K / H / I] Buttons

Use these buttons when adjusting the menu items.

(A Pages 29, 30)

G [PRESET] Button

Use this button to reset the values to factory settings

when items in the menu are selected.

H [ZOOM T/W] Button

Press this button to change the size of the projected

image. (A Page 26)

I [OPERATE OFF] Button

When this unit is operating (projecting), pressing this

button for more than 1 second switches the unit to the

cool down mode, which will automatically switch to the

standby mode after about 60 seconds. (A Page 27)

● The [OPERATE OFF] button will not work within

approximately 1 minute after the light source has been

turned on. Start operation only after 1 minute’s time.

J [TEST] Button

Press this when adjusting focus, screen size or

picture quality. Press the button to switch to the test

pattern image for adjustment.

● Alter the test pattern with the [TEST] button.

● Press the [EXIT] button to return to the original image.

K [EXIT] Button

Press this button to return to the previous hierarchical

menu (for example, to return from submenu to main

menu). Pressing this button when the main menu is

displayed clears the menu. (A Pages 29, 30)

L [ENTER] Button

Press this button to show the next hierarchical menu

(for example, to enter submenu from main menu). It is

also used when AENTERB is displayed against a

selection item on the menu screen. (A Pages 29, 30)

M [HIDE] Button

Press this button to temporarily clear the video image.

Press again to resume. (A Page 27)

N [FOCUS +/-] Button

Use this button to adjust focus of the projected image.

(A Page 27)

Remote Control

ENTER

OFF

CHP

TEST

MENU EXIT

LIGHT

OPERATE

HIDE

PRESET

ZOOM

FOCUS

DLA-HD10_EN-FR.book Page 16 Thursday, November 10, 2005 12:54 PM

Load batteries into the remote control. If the remote control starts to function erratically, replace the batteries.

a Open the back cover

Press the back cover slightly and slide it in the

direction of the arrow.

b Load the batteries

Insert the 2 (AAA) batteries supplied according to the

F, G marks. To prevent short circuit, be sure to insert

the G (minus) end of the battery first.

c Close the back cover

Slide in the direction of the arrow to close the back

cover.

Loading Batteries into the Remote Control

Precautions for Using Batteries

If batteries are incorrectly used, they may crack or

leak. This could cause fire, burn, malfunction, and

staining or damaging of the surroundings. Beware

of the following:

● Do not mix new and old batteries.

● Do not mix different type of batteries as they are

different in characteristics.

● Insert batteries according to the FG marks on the

battery case.

● Be sure to insert the minus G end in first to prevent

short circuit.

● Do not put batteries into fire or recharge them.

● Use only designated batteries.

● Remove the batteries if the remote control is not to be

used for a prolonged period.

● Use manganese batteries wherever possible. Do not

use rechargeable, alkaline batteries.

● Read the cautions displayed on the batteries.

Battery Life

Batteries last for 6 months to 1 year under normal use.

However, batteries provided are for confirming operation

and may not last that long. When the remote control fails

to operate properly, replace the batteries with new ones.

Battery Leakage

When the batteries are totally exhausted and can no

longer be used, replace them immediately.

Leaving the batteries in the battery compartment causes

leakage, which may in turn lead to malfunction.

ENGLISH

DLA-HD10_EN-FR.book Page 17 Thursday, November 10, 2005 12:54 PM

Installing the Projector

Please read the following carefully when installing this unit.

Minimum Space Required

Precautions for Installation

Installation Environment Precautions for Usage

This unit is a precision device. Do not install it at

the following places. Doing so may cause fire or

malfunction of the unit.

● Where there is water, humidity or dust

● Where the unit may be subjected to oily or cigarette

smoke

● On a soft surface such as carpet or cushion

● Where the unit may be subjected to high temperature

due to direct sunlight

● When temperature is high or low

Allowable operation temperature range: +5 f to +35 f

Allowable relative humidity range: 20 % to 80 % (no

condensation)

Allowable storage temperature range: -10 f to +60 f

● Any room in which there is cigarette smoke or grease

Even where smoke and grease levels are minimal,

prolonged exposure will affect this unit. This unit emits

heat and optical components are cooled down by taking

in a large amount of air. The optical path may be soiled

by grease/dirt, thus causing images to become dark or

color projection to deteriorate. When soiling on the

optical components occurs, removal of grease/dirt totally

will not be possible.

This unit makes use of a light source lamp that

may reach a high temperature during projection.

Do not allow projection under the following

conditions. Doing so may cause fire or

malfunction of the unit.

● Projection with the unit laid on its sides

● Projection with the unit installed in an unreasonable

angle

Avoid using this unit at an angle of more than ⴣ5 ⬚

horizontally and ⴣ25 ⬚ vertically. Doing so may cause

unevenness in the color or shorten the lamp life.

● Projection at a location that blocks the air inlets or

exhaust vents

● Projection at a place exposed to air blasts from an air-

conditioner

Do not use a cover which may enclose this unit

or block the air inlets/exhaust vents. Allow

sufficient space around this unit. When this unit

is enclosed in a space of dimensions as

indicated on the left, use an air-conditioner so

that internal and external temperatures are the

same.

300 mm and

above

500 mm

and above

300 mm and

above

150 mm and

above

150 mm and above

DLA-HD10_EN-FR.book Page 18 Thursday, November 10, 2005 12:54 PM

When mounting of this unit is required, do so by removing the 4 feet and make use of the 4 screw holes (M8 nuts) at

the bottom of this unit. Allow sufficient space around the air inlets to avoid blocking them.

Mounting this Unit

Air Inlet

Precautions for Ceiling-mount

● To ceiling-mount this unit, special expertise and

techniques are necessary. Be sure to ask your dealer

(or a specialist) to perform mounting (to ceilings, etc.).

● Do not mount at places that may be subjected to

vibration and shock.

● Depth of the screw holes (screw length) is 30 mm. Use

screws shorter than 30 mm but longer than 19 mm.

Otherwise, the screws may damage the internal parts

of this unit and cause malfunction.

● Install at a safe place in case this unit or a part of it may

drop. If the light-source lamp is broken, small pieces of

glass from the mesh of the filter may appear outside

this unit.

ENGLISH

DLA-HD10_EN-FR.book Page 19 Thursday, November 10, 2005 12:54 PM

Installing the Projector (continued)

The optimum image can be obtained when the center of this projector’s lens and the screen are placed perpendicular

to each other. Take note of the projection angle when placing them. Failing to do so may give rise to trapezoidal

distortion of the projected image.

● This unit does not come with a function to correct trapezoidal distortion or adjust horizontal gradient.

When viewed from the left (or right)

When viewed from the top (or bottom)

Projector and Screen Installation

90° 90° 90°

Screen

Install the projector such that the center of the projection screen

is on the same level with the center of the lens when there is a 0

% shift (offset).

Center Line of

Lens

90° 90° 90°

Screen

Install the projector such that the lower end of the projection

screen is on the same level with the center of the lens when

there is a 50 % shift (offset).

Center Line of

Lens

90° 90° 90°

Screen

Center Line of

Lens

DLA-HD10_EN-FR.book Page 20 Thursday, November 10, 2005 12:54 PM

La pagina sta caricando ...

JVC DLA-HD10K-SYS Manuale utente

Marca: JVC

Modello: DLA-HD10K-SYS

Categoria: Proiettori di dati

Tipo: Manuale utente

Scarica il pdf

rapporto

in altre lingue

English: JVC DLA-HD10K-SYS User manual

JVC DLA-HD10K-SYS Manuale utente

JVC DLA-HD10K-SYS Manuale utente

in altre lingue

Documenti correlati

Altri documenti