Marantz PMD-706 Guida utente

User Guide

English ( 3 – 20 )

Guía del usuario

Español ( 21 – 39 )

Guide d’utilisation

Français ( 40 – 58 )

Guida per l’uso

Italiano ( 59 – 77 )

Benutzerhandbuch

Deutsch ( 78 – 96 )

Appendix

English ( 97 – 98 )

1

2

1

2

3

4

5

6

7

8

9

10

11

12

13

1

2

3

4

5

6

1

2

3

4

5

6

2

3

User Guide (English)

Introduction

Box Contents

PMD-706

SD Card

Micro-USB Cable

(2) XLRF-1/4" TRS Cables

User Guide

Safety & Warranty Manual

Support

For the latest information about this product (documentation, technical specifications, system

requirements, compatibility information, etc.) and product registration, visit marantzpro.com.

For additional product support, visit marantzpro.com/support.

4

Features

Front Panel

1. Hot Shoe Mount: Attach a camera or lighting panel on top of this hot shoe mount.

2. Display: Use this display to view and change PMD-706's settings. See the Setup chapter for examples of

how to configure your settings in different scenarios.

3. Enter Dial: Rotate the dial to select from the Menu options. Push the dial to select the current

option.

4.

Menu:

Push this button to show the menu options on the display. Press the Menu button again to return to

the home screen. See Features > Menu Options for more details on navigating through the menus.

5. Slate: Press and hold this button to mark a track with the slate sound. The slate tone generator allows for

easy audio file alignment with video files when using video editing software.

6. Input Level Control: Turn each knob to adjust the level of its corresponding input. The LED will turn red if the

input signal is "clipping" or distorting. If this happens, turn down the Input Level control until the red LED is no

longer illuminated.

7. Input 1/Play: When in Playback mode, press this button to play an audio file. When in Menu mode, press this

button to go to the CH1 column settings. When a file or folder is selected on the Browse screen, press this

button to return to the Home screen and play the first file in the folder.

8. Input 2/Pause: Press this button to pause an audio file when the unit is in playback mode. When in Menu

mode, press this button to go to the CH2 column settings.

9. Input 3/Rewind: When an audio file is playing in Playback mode, press and hold this button to search

backward through the audio file. When an audio file is stopped in Playback mode, press and release this

button to skip to the previous audio file. When in Menu mode, press this button to go to the CH3 column

settings.

10. Input 4/Stop: When in Playback mode, press this button to stop an audio file during playback or recording.

Use this button to answer “NO” to a confirmation message on a setting screen. When in Menu mode, press

this button to go to the CH4 column settings.

11. Record: When a formatted SD card is in the SD card slot, press this button to start recording. See Features >

Menu Options > Media for details on formatting a SD card.

12. Input 5/Fast Forward: When an audio file is playing in Playback mode, press and hold this button to search

forward through the audio file. When an audio file is stopped in Playback mode, press and release this button

to skip to the next audio file. When in Menu mode, press this button to go to the CH5 column settings.

13. Input 6: When in Menu mode, press this button to go to the CH6 column settings.

1

2

1

2

3

4

5

6

1

2

4

5

7

8

9

10

11

12

13

3

6

1

2

3

4

5

6

5

Rear Panel

1. Battery Compartment: Insert 4

AA batteries into this

compartment to power the unit.

Note: If recording with 4 or more

channels using 48V phantom

power, a USB power adapter or a

computer’s USB bus power must

be used in order to provide the

necessary power (1A) to all

channels.

Bottom Panel

1. Tripod Locking Hole: Attach your tripod here for a

secure connection.

2. 1/4” Threaded Insert: Connect your mounting

adapter from a tripod here.

Right Side Panel

1. Power On/Off/Hold Switch: Slide this switch

down to power PMD-706 on or off. Slide this

switch up to activate or deactivate the Hold

feature. When Hold is activated, all of PMD-706's

buttons will be disabled to prevent accidental

changes.

2. XLR+1/4” TRS Inputs: Connect a microphone or

line-level device to these XLR+1/4” (6.35 mm)

inputs.

3. Micro USB Port: Connect this port to a

computer with the included USB cable. This

connection will power PMD-706. You can also

use this connection to transfer files between PMD-706 and your computer. You can also connect this

port to a USB power adapter (sold separately) to power PMD-706 from a standard power outlet.

Note: If recording with 4 or more channels using 48V phantom power, a USB power adapter or a

computer’s USB bus power must be used in order to provide the necessary power (1A) to all channels.

4. Line Out: Connect this 1/8” (3.5 mm) output to a mixer, another recorder, or powered speakers. Go to

Menu > Output Control

to adjust the volume output.

5. Headphone Output: Connect this 1/8” (3.5 mm) output to headphones for monitoring the incoming

audio signal or audio playback.

6. Headphone Volume Control: Adjust the headphone output volume using this control.

Note: Before connecting any device (condenser or dynamic microphones, line-level devices, etc.) to

any XLR, 1/4” input, or external inputs, ensure phantom power is turned off. Connecting or

disconnecting devices to or from these inputs while phantom power is on can damage the device or

PMD-706.

1

2

1

2

3

4

5

6

7

8

9

10

11

12

13

1

2

3

4

5

6

1

2

3

4

5

6

1

2

1

2

3

4

5

6

1

2

4

5

7

8

9

10

11

12

13

3

6

1

2

3

4

5

6

1

2

1

2

3

4

5

6

1

2

4

5

7

8

9

10

11

12

13

3

6

1

2

3

4

5

6

Left Side Panel

1. XLR+1/4” TRS inputs: Connect a

microphone or line-level device to these

XLR+1/4” (6.35 mm) inputs.

2. 1/8” (3.5 mm) Camera Input: Connect

the audio output of a camera to this 1/8”

(3.5 mm) TRS input.

3. 1/8” (3.5 mm) Camera Output:

Connect this

1/8” (3.5 mm) TRS

output

to the audio input of a camera. Go to

Menu > Output Control

to adjust the

volume output.

4. External Input: Connect a stereo

microphone or audio source to this 1/8” (3.5 mm) TRS input. See Menu > Mic Power to learn

how to turn phantom power on or off for this input.

5. SD Card Slot: Insert an SD card here.

6. 1/4” (6.35 mm) Inputs: Connect a mic-level or line-level device to these 1/4” (6.35 mm) inputs

using the included XLRF-1/4" cables. Phantom power can be supplied to these inputs.

Note: Before connecting any device (condenser or dynamic microphones, line-level devices,

etc.) to any XLR, 1/4” input, or external inputs, ensure phantom power is turned off. Connecting

or disconnecting devices to or from these inputs while phantom power is on can damage the

device or PMD-706.

1

2

1

2

3

4

5

6

1

2

4

5

7

8

9

10

11

12

13

3

6

1

2

3

4

5

6

7

Home Screen Display

1. Record/Pause/Stop indicator

2. Elapsed time

3. Remaining record time available

4. 0 dB reference line

5. -12 dB reference line

6. Battery indicator

7. Mix channel

8. Channels 1-6 setup info

9. Signal indicator bar

10. Peak threshold

11. Recording type: stereo (S), mono (M), dual (D)

12. Input setting: mic (M), line (L), Ext 1 (E1), Ext 2

(E2)

13. Encryption on/off

Play Screen

1. Battery indicator

2. File name

3. Folder name

4. Running time of playback

5. Remaining time of playback

6. Play/Stop/Pause/FF/Rewind indicator

7. Left/Right playback meters

8. 0 dB level

9. Level indicators: -6 dB, -12 dB (major),

-15 dB, -18 dB

10. Digital readout of playback level

11. Encryption on/off: See Menu 7 – Rec Set for

details on how to enter an encryption key.

Note: If you try to play an encrypted file, you

must enter the encryption key first.

1 2 3

4

5

6

7

8

9

10

11

12

13

Channel Reporting Symbols

Channel is active and has NO phantom power applied

Channel is not active

Channel is active and has phantom power applied

1

2

3

4

5

6

7

8

9

10

11

8

Menu Options

Press the Menu button to show the menu options on the display. To move vertically on a page or to

the next page, scroll with the Enter dial. To select a menu item or sub item, press the Enter dial and

change the item’s options by turning the dial. Press the Enter dial to confirm the item’s changes. Use

Input 1-6 buttons to jump to a specific column for CH1-CH6.

1. Input

Gain Setting (GAIN)

• L (Low)

• M (Mid)

• H (High)

• H+ (High Plus)

Selection (SEL)

• CH1–CH4

• M (mic level)

• L (line level)

• E1 (external 1) (1 or 3)

• E2 (external 2) (2 or 4)

• CH5 & CH6

• M (mic level)

• L (line level)

• E1 (external 1) (5) / E2 (external 2) (6)

• C1 (Camera In 1) (5) / C2 Camera In 2 (6)

Delay (DELY): 0-300 ms (@ 44.1 kHz) in 1 ms increments

0-270 ms (@ 48 or 96 kHz) in 1 ms increments

Phase (PHAS): 0, 180

2. Mic Power

Phantom Power (PHAN): On, Off

Phantom Power Voltage (VOLTAGE): 24V, 48V

Plug-in Voltage for Ext Input (PLUG IN): On, Off

9

3. Rec (Record) Assign

Recording Mode (MODE): M (mono), ST (stereo),

DM (dual mono), DST (dual stereo), M/S R

(mid/side recording), MIX

Mix Setting (MIX): On, Off

DLVL (Dual Level): -12 dB to -1 dB in 1 dB

increments (available only in dual mono and dual

stereo modes)

Note: If sampling rate on Menu 7 – Rec Set is set to 96 kHz, CH5 and CH6 will be unavailable

to use for recording.

4. Level Control

Limiter (LIM): Off, On, 3B (that channel only), LINK

(CH1/2 and/or CH3/4), 3BAND (CH1/2 and/or

CH3/4)

Auto Level Control (AUTO): On (all LIM settings

will be set to OFF), Off

Low Cutoff Frequency (LCF): Off, 50 Hz, 80 Hz,

120 Hz, 180 Hz, 220 Hz

Note: The limiter can only be turned on if the sampling rate is 44.1/48 kHz. When set to ON or

3B, the limiter only affects the channel that has excessive input. When set to LINK or 3BAND,

the limiter affects channels that have excessive input and the channels linked to them.

5. Mixer

Recording Mode (MODE): M/S R (mid/side

recording: record), M/S P (mid/side recording:

playback), MIX

Level (LVL): --- (off), 0–100

Panning (PAN): L1–12 (left), C (center), R1–12 (right)

Note: To set the MODE, use the Rec Assign Menu (3). To set the LVL when MODE is set to

M/S P, use the Output Control Menu (6). To set the LVL when MODE is set to M/S R or MIX,

use the Rec Assign Menu (3).

10

6. Output Control

Camera/Line Source (CAM/LINE SOURCE) &

Monitor Source (MONITOR SOURCE) :

- MIX: sent to mix

- CH1-CH6: mono signal sent to left and right

- CH1-2: CH1 (left), CH2 (right)

- CH3-4: CH3 (left), CH4 (right)

- CH5-6: CH5 (left), CH6 (right)

- M/S 1-2: CH1+CH2 (left), CH1-CH2 (right)

- M/S 3-4: CH3+CH4 (left), CH3-CH4 (right)

- M/S 5-6: CH5+CH6 (left), CH5-CH6 (right)

Line Out Level (LINE OUT LEVEL): -12 dB to +12 dB in 1 dB increments

Camera Out Level (CAMERA OUT LEVEL): -24 dB to +42 dB in 1 dB increments

7. Rec (Record) Set

Recorded File Format (FORMAT): BWF 16B (16-

bit), BWF 24B (24-bit), WAV 16B (16-bit), WAV24B

(24-bit)

Recording Sample Rate (SAMPLE RATE): 44.1

kHz, 48 kHz, 96 kHz

Note: If sampling rate on Menu 7 – Rec Set is set

to 96 kHz, CH5 and CH6 will be unavailable to use

for recording.

Encryption (ENCRYPTION): Yes, No. When creating an encryption key, use the Enter dial to

change the numbers, press the Enter dial to enter each number, and press Menu to set the

code and exit this screen.

8. Slate Settings

Automatic Slate (AUTO): Off, Head (start of

recording), Head Tail (start and stop of recording)

Slate Volume (VOLUME): -36 dB to -12 dB in 1 dB

increments

11

Slate Tone Settings (SLATE TONE): 1–# s

(seconds), -14 dB to -20 dB (level)

To set the slate tone, select SLATE TONE and

press the Enter dial. Turn the Enter dial to set the

volume level (-20 dB to -14 dB). Press the Enter

dial to start or stop the tone. Press Stop to save

this level and return to the previous screen.

9. File

Create New Folder (NEW FOLDER): This creates

a new folder on the SD card.

File Name Type (NAME TYPE): WORD (text),

DATE (time/date)

File Name Text (WORD): up to 6 characters

Count Initialize (COUNT INIT): This resets the sequential file numbering system used to name

the file.

Files are named in the following way:

- When TYPE is set to WORD: WORD_File#_CH#_RecordingMode (e.g.,

PMD706_0001_CH1_M or PMD706_0003_CH34_St).

- When TYPE is set to DATE: YYYY_MM_DD_HH_MM_CH#_RecordingMode (e.g.,

2017_05_16_17_CH3_M or 2017_03_10_08_CH34_St).

10. Gang Control

This screen allows you to link volume controls by

creating 3 groups and tying any channel input to

the same input level control. The input level control

with the lowest number in a group will control the

level for all of them.

11. Meter Settings

Peak Hold (PEAK HOLD): 1 sec, 2 sec, 10 sec,

Hold, Off

Input Control Minimum Setting (TRIM MIN): -40

dB (from maximum setting), MUTE

12

12. Media

Browse Files (BROWSE): EXECUTE (to view

sequential list of all files in the current folder; turn

the Enter dial to scroll and press the Enter dial to

play a file)

Format SD Card (FORMAT): QUICK (to format

the SD card in the SD card slot)

When Browse is activated, a screen appears with

all files listed sequentially in the current folder

listed. Scroll through the files and press Enter to

play a file.

Select Format and choose Quick to format the SD

card.

13. Power Controls

Battery Type (BATTERY TYPE): ALK (alkaline), NI-

H (nickel-hydrogen), LIT (lithium)

Automatic Power Save (AUTO PWR SAVE): OFF,

3 MIN, 5 MIN, 10 MIN, 30 MIN

Backlight Dimming (BACKLIGHT DIM): 5 SEC, 15

SEC, 30 SEC, ALWAYS

Display Contrast (CONTRAST): Low, Mid, Hi

14. System

Initialize (INITIALIZE): This resets all PMD-706

settings to their original (factory) defaults.

Set Date & Time (DATE/TIME): Press the Enter

dial to cycle through the year, month, day, hour,

minute, and second. Turn the Enter dial to set

each one. Press Menu to confirm the entire

setting.

Date Format (DATE FORMAT): MM/DD/YY (month/day/year) or DD/MM/YY (day/month/year)

System Information (INFORMATION): BWF/WAV (audio format), TITLE (file name), DATE (date

and time stamp), SIZE (file size and number of channels used), FILES (number of files on SD

card), FOLDERS (number of folders on SD card), SD SIZE (total capacity of SD card), SD AVAIL

(free space on SD card), AUTO POWER SAVE (automatic power saving time), AA/LI/NIH

BATTERY LEVEL (battery life remaining), FIRMWARE VERSION (current firmware)

13

Operation

Setup

1. Ensure the tripod is level, set on stable ground, and the tripod legs are securely locked in place.

2. Attach the threaded insert on PMD-706 to your tripod mount, and use PMD-706's tripod locking hole,

if needed.

3. Attach your camera securely on top of PMD-706’s hot shoe mount.

4. Connect microphones or line-level devices to the XLR+1/4" inputs.

5. Connect the audio output of your camera to the Camera Input on PMD-706 using an 1/8” (3.5 mm)

cable.

6. Connect PMD-706’s Camera Output to the audio input of your camera using an 1/8” (3.5 mm) cable.

7. If your microphone requires phantom power, select the appropriate voltage for your microphone from

Menu > Mic Power.

8. Adjust the input level controls to set the gain for the input signal for each channel.

9. Connect headphones to the Headphone Output to monitor the audio input signal or to hear the audio

playback from your camera.

See the following examples in this chapter to learn how to set up PMD-706 in specific scenarios.

Recording Modes

Mono: Record up to 6 mono tracks.

- Recorded File 1 = CH1

- Recorded File 2 = CH2

- Recorded File 3 = CH3

- Recorded File 4 = CH4

- Recorded File 5 = CH5

- Recorded File 6 = CH6

Stereo: Record up to 3 tracks in stereo pairs.

- Recorded File 1 = CH1 (left), CH2 (right)

- Recorded File 2 = CH3 (left), CH4 (right)

- Recorded File 3 = CH5 (left), CH6 (right)

Dual Mono:

- Recorded File 1 = CH1

- Recorded File 2 = CH1 - dlvl

- Recorded File 3 = CH3

- Recorded File 4 = CH3 - dlvl

- Recorded File 5 = CH5

- Recorded File 6 = CH5 - dlvl

Dual Stereo:

- Recorded File 1 = CH1 (left), CH2 (right)

- Recorded File 2 = CH1 -dlvl (left), CH2 -dlvl (right)

M/S R:

- Recorded File 1 = Left (CH1 + (CH2 x Pan Setting)), Right (CH1 – (CH2 x Pan Setting))

- Recorded File 2 = Left (CH3 + (CH4 x Pan Setting)), Right (CH3 – (CH4 x Pan Setting))

- Recorded File 3 = Left (CH5 + (CH6 x Pan Setting)), Right (CH5 – (CH6 x Pan Setting))

14

Setup Examples

Example 1 – Mono/Stereo Recording

This example shows:

- condenser microphones on Inputs 1 and 2 (using +48V phantom power)

- a dynamic microphone on Input 3

- an audio device on Input 4 with a 50 ms delay

The menu options are configured to record a stereo file from Inputs 1 and 2 and two mono files from

Inputs 3 and 4.

The recorded files will be named as follows:

PMD706_0001_CH3_M.WAV

PMD706_0001_CH4_M.WAV

PMD706_0001_CH12_St.WAV

15

Example 2 – Stereo and Mix Recording

This example shows:

- condenser microphones on Inputs 1 and 2 (using +48V phantom power)

- a dynamic microphone on Input 3

- an audio device on Input 4

The menu options are configured to record a stereo file and mix track from Inputs 1 and 2 (with

Left/Right level at 50%), Input 3 center panned, and Input 4 level at 75% (left) and 25% (right).

The recorded files will be named as follows:

PMD706_0001_CH12_St.WAV

PMD706_0001_CH34_MIX.WAV

16

Example 3 – Stereo and Mix Recording

This example shows:

- condenser microphones on Inputs 1 and 2 (using +48V phantom power)

- a dynamic microphone on Input 3

- an audio device on Input 4

The menu options are configured to record 4 mono files from Inputs 1-4 and a mix of Inputs 1-4 on

tracks 5/6 with CH1 going to the left, CH2 to the right, and CH3 and CH4 mono.

The recorded files will be named as follows:

PMD706_0001_CH1_M.WAV

PMD706_0001_CH2_M.WAV

PMD706_0001_CH3M.WAV

PMD706_0001_CH4_M.WAV

PMD706_0001_CH56_MIX.WAV

17

Example 4 – Dual Mono Recording

This example shows:

- a dynamic microphone on Input 1

The menu options are configured to record a dual mono file with the safety track at -9 dB lower than

Input 1.

The recorded files will be named as follows:

PMD706_0001_CH1_DM1.WAV

PMD706_0001_CH1_DM2.WAV

18

Example 5 – Dual Stereo Recording

This example shows:

- condenser microphones on Inputs 1 and 2 (using +48V phantom power)

The menu options are configured to record a dual stereo file with the safety track at -12 dB lower

than inputs 1 and 2. The left stereo channel will be CH1, and the right stereo channel will be CH2.

The recorded files will be named as follows:

PMD706_0001_CH12_DSt1.WAV

PMD706_0001_CH12_DSt2.WAV

19

Example 6 – M/S Recording

M/S (Mid/Side) recording consists of two microphones: a directional mic pointed towards the sound

source and a figure 8 mic pointed towards the sides (Figure 1).

• Plug the mics into PMD-706 as shown in Figure 2. You can use Input 3 or 5 instead of Input 1 or

4, or you could use Input 6 instead of Input 2.

• To record without processing, use the M/S R mode. You will be able to monitor CH1 and CH2

without processing.

• To record without processing but monitor it with processing, use the M/S P mode.

• To record without processing or monitoring it, use mono (M) recording for Input 1 and Input 2, or

use stereo (ST) recording for Inputs 1/2.

Note: This example shows a specialized mid/side recording microphone. You could alternatively use

a standard cardioid mic to capture the mid field and figure-8 mic (perpendicular to the cardioid mic)

to capture the side fields.

Figure 1: Set up microphone on stand and

p

oint toward the source.

Fi

g

ure 2: Connect mid and side mics to inputs.

Sta

g

e Center

Mid Mic

Side Mic

20

M/S R Menus M/S P Menus

La pagina sta caricando ...

Marantz PMD-706 Guida utente

Marantz PMD-706 Guida utente

in altre lingue

Documenti correlati

Altri documenti