Celestron 71221 Manuale utente

INSTRUCTION MANUAL

Model #71221

NV-2 NIGHT VISION SCOPE

ENGLISH I 3

Table of Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Notes on Use in Low Light and Complete Darkness . . . . . . . . . . . . . . . . . . . . . . . . 4

What’s in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Battery Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Power On. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Power Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Observing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Adjusting the Brightness of the Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Adjusting the Infrared Beam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Still Image Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Playing Back . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Deleting Files. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Video Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Setting the Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Digital Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Video Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Connecting to a Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Power Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Charging the Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Technical Speciﬁcations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Maintenance and Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Celestron Two Year Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

4 I ENGLISH

The Celestron NV-2 Night Vision Scope is designed for use during the day or at night. It offers both standard and night

vision viewing, still image and video recording, and in-device playback. The optical magniﬁcation is 4.5x and the digital

zoom is 5.0x.

The Celestron NV-2 Night Vision Scope features a VGA 640x480 color display screen for enhanced image quality during

daylight viewing. At night, the Celestron NV-2 Night Vision Scope can resolve some objects up to 219 yd (200 m) away in

complete darkness.

The Celestron NV-2 Night Vision Scope records all still and video ﬁles to its removable memory card. Memory card use

equals ½ hour of video for each gigabyte of memory card size (for example, a 2GB card equals 1 hour of video, while a

32GB card equals 16 hours).

The Celestron NV-2 Night Vision Scope includes a USB 2.0 cable. This cable may be used to charge the unit with a USB plug

(not included), and to transfer recorded ﬁles to a computer. An audio and video output cable is also included for connecting to

both PAL and NTSC monitors.

One AW 18650 3.7V 2,200 mAh rechargeable lithium ion battery is included. This provides the Celestron NV-2 Night

Vision Scope with 2-3 hours of battery life.

NOTES ON USE IN LOW LIGHT AND COMPLETE DARKNESS

The night vision performance of the Celestron NV-2 Night Vision Scope will be enhanced in complete darkness when

the infrared beam is activated. This will increase the clarity of the image.

Adjust the focus wheel of the infrared beam to observe subjects at different distances. The Celestron NV-2 Night Vision

Scope uses a low illumination CCD. It can be used in low light (but not completely dark) environments without the

infrared beam being activated.

INTRODUCTION

ENGLISH I 5

WHAT’S IN THE BOX

1 Objective Lens

2 Focus Wheel

3 Battery Compartment

4 Infrared Beam

5 Port Cover

6-7 +/- Button

8 Mode Button

9 Power/Enter Button

10 Eyepiece

11 Tripod Adapter

12 Memory Card Slot

13 Audio/Video Port

14 Charging Indication Light

15 USB Port

ACCESSORIES

• AV Cable

• USB Cable

• AW 18650 3.7V 2,200 mAh Rechargeable

Lithium Ion Battery

• Carrying Case

• Hand Strap

• Lens Cloth

6 I ENGLISH

Remove the battery compartment cover, insert the battery with

the cathode facing inward, then replace the battery compartment

cover tightly and turn on the device. Once the screen is illumi-

nated, the Celestron NV-2 Night Vision Scope is ready to use.

IMPORTANT:

• Only use the correct battery model

• The battery must be fully charged

• The battery must be installed correctly

(cathode facing inward)

POWER ON

• Remove the objective lens cap.

• Press the Power Button (9) one time. Look through eyepiece

(10). Once you see the screen is turned on (like the picture on

the right), the device is working.

What the icons mean:

1. Photo mode

2. Battery life

3. Memory card is installed

4. The number of pictures that can be recorded based on the

memory capacity

BATTERY INSTALLATION

OPERATING INSTRUCTIONS

Battery

Compartment Cover

POWER OFF

Press and hold the Power Button (9) for 3 seconds to turn off the Celestron NV-2 Night Vision Scope.

1 2 3 4

ENGLISH I 7

OBSERVING

• Remove the objective lens cap. Point the objective at the subject and look through the eyepiece (10).

• Adjust the diopter ring on the eyepiece (10) until you can see the screen clearly.

• Adjust the focus wheel (2) until the subject is in focus.

• The brightness of the screen will be automatically adjusted based on the brightness of the environment.

• Press the +/- buttons (6 & 7) to zoom in or out. The zoom range is from 1x to 8x.

• In low light conditions, the infrared beam is not required.

• In complete darkness, using the infrared beam is suggested. Adjust the brightness of the infrared beam to observe the

subject clearly.

IMPORTANT:

Do not block the Celestron NV-2 Night Vision Scope’s infrared beam when using the device in completely dark conditions.

ADJUSTING THE BRIGHTNESS OF THE SCREEN

• Press and hold the Mode Button (8) for 3 seconds to enter

the screen brightness adjustment menu.

• The number indicates the current brightness of the screen

(see the image on the right).

• Press the Mode Button (8) to move the “*” up or down to

select “Bright” to adjust the brightness.

• Press the +/- buttons (6 & 7) to adjust the brightness from

1 (lowest) to 9.9 (brightest).

8 I ENGLISH

ADJUSTING THE INFRARED BEAM

• In the observing (still image/video recording) mode, hold

the Mode Button (8) for 3 seconds to enter the infrared

beam adjustment menu (as shown on the right). The digits

behind the “Lamp” show the current brightness of the

infrared beam.

• Press Mode Button (8) to select the “Lamp” to adjust the

brightness.

• Press the +/- buttons (6 & 7) to adjust the screen bright-

ness from 0 to 9. 9. To close the infrared beam, adjust the

brightness to 0.

• Once the infrared beam is on, “NL” will be indicated on

the upper left corner. The number behind the “NL” is the

current brightness setting of the infrared beam.

IMPORTANT:

The screen brightness adjustment menu and infrared beam

brightness adjusting menu will be automatically exited if

there are no operations made in 5 seconds after activating

the menu.

STILL IMAGE RECORDING

When you turn the device on, it is automatically in observing

(image recording) mode.

What the icons mean:

1. Photo mode

2. Battery life

3. Memory card is installed

4. The number of pictures that can be recorded based on

the memory capacity

Click the Enter Button (9) once to record one image. The

image will be saved automatically on the memory card.

The number displayed on the screen (4) indicates the total

number of images that can be recorded based on the card

memory capacity. This number is determined by the memory

capacity of the card. The actual number of pictures may vary.

1 2 3 4

ENGLISH I 9

PLAYING BACK

• Press the Mode Button (8) to enter playback mode. All

video and images saved on the memory card will be

recognized and automatically played back.

• Press the +/- Button (6 & 7) to select ﬁles. Press the Enter

Button (9) to play and pause the playback.

What the icons mean in Photo Playback:

1. Playback mode

2. Battery indicator

3. Memory card is installed

4. Total number of ﬁles saved

What the icons mean in Video Playback:

1. Playback mode

2. Battery indicator

3. Date and length of the video

4. Memory card is installed

5. Length of the video

6. Total number of ﬁles saved

1 2 3 4 5 6

1 2 3 4

10 I ENGLISH

DELETING FILES

• In playback mode, press and hold the Enter Button (9) to

select the ﬁle you want to delete.

• The ﬁle information will be displayed on the screen. Press

the +/- Button (6 & 7) to select the ﬁle to delete.

• Press the Enter Button (9) again to conﬁrm the deletion.

Press the Mode Button (8) to exit.

• In playback mode, press +/- Button (6 & 7) to select

different recordings.

• Video and images will be automatically recognized and

played back based on the time sequence.

• In video playback mode, press Enter Button (9) to play the

video.

• Press the Enter Button (9) again to pause the video.

• Press the Mode Button (8) to go back to observing (image

recording) mode.

VIDEO RECORDING

In observing (image recording) mode, press the Mode

Button (8) once to enter the video recording mode.

What the icons mean:

1. In video recording mode

2. Battery indicator

3. Date and recording time remaining

4. Recording time remaining

• Press the Enter Button (9) to start recording.

• The video is automatically saved to the memory card.

• Recording time remaining (4) is calculated based on the

memory capacity of card. It may differ from the actual

recording time.

• Press the Enter Button (9) again to pause or exit video

recording.

1 2 3 4

ENGLISH I 11

SETTING THE TIME

• Press and hold the Enter Button (9) to enter the menu, and

press the Mode Button (8) to select “Time Set.”

• Press the +/- Button (6 & 7) to enter time setting mode.

1. Time Format Selection

2. Date Set

3. Time Set

• Press the +/- Button (6 & 7) to switch time format.

• Press the Enter Button (9) to switch the cursor to a different

position.

• Press the +/- Button (6 & 7) to adjust the date and time.

• Press the Enter Button (9) again to exit time setting mode.

DIGITAL ZOOM

Digital zoom can be used in observing (image recording)

and video recording mode.

• Press the + Button (7) once to zoom in by 1x. The maximum

zoom power is 5x above the standard magniﬁcation level.

• Press – Button (6) once to zoom out by 1x. The minimum

zoom power is 1x (equal to the standard magniﬁcation

level).

• The zoom power is indicated on the screen (5).

1 2 3 4 5

1

2

3

12 I ENGLISH

POWER MANAGEMENT

BATTERY

One AW 18650 3.7V 2,200 mAh rechargeable lithium ion battery is included. To protect your battery, please allow the

battery to charge for 10 hours before using it for the ﬁrst time.

CHARGING THE BATTERY

A USB cable for connection to an external power source is included. Connect the USB cable to the USB Port (15)

on the Celestron NV-2 Night Vision Scope. Connect the other end of the cable to a USB power port or AC adapter

appropriate to the voltage of the country in which the device is being charged.

VIDEO OUT

To play a video on other monitors, connect the video cable to the Audio/Video Output plug (13) and connect to the monitor.

The video can be played on the monitor. At the same time, it will also play on the device’s screen.

CONNECTING TO A COMPUTER

Connect the Celestron NV-2 Night Vision Scope to a computer using the USB 2.0 cable. After the device is successfully

connected, the computer will automatically recognize the content on the memory card. When using the USB cable to

connect to a computer, the device must have a fully charged battery for optimal performance.

ENGLISH I 13

Optical Speciﬁcations

Magniﬁcation 4.5×

Objective Lens Diameter 40mm

Field of View 5°× 3.75°

Diopter ±10

Detection Distance in Low Light Condition 2m - ∞

Detection Distance in Complete Dark Condition Up to 219 yd (200 m) on reﬂective subjects

Power Source Speciﬁcations

Operating Voltage 3.7V

Battery Rechargeable lithium ion battery

Other Speciﬁcations

Dimension (L × W × H) 161×58×77mm

Weight 0.61 lb/275 g

TECHNICAL SPECIFICATIONS

MAINTENANCE AND SAFETY

• The Celestron NV-2 Night Vision Scope is designed to operate properly between 23°F and 104°F, and at a humidity

level less than 80%.

• The Celestron NV-2 Night Vision Scope should always be stored in its case when it is not in use.

• Store the Celestron NV-2 Night Vision Scope in a cool, dry and clean place.

• The Celestron NV-2 Night Vision Scope is not waterproof or fog proof. Avoid dropping it on the ground or bumping it.

• Charge the device immediately when the LCD screen cannot be turned on. Charge the battery monthly to avoid damage

to the battery.

• Using a can of compressed air, blow away any dust or debris on the lens. To remove dirt or ﬁngerprints, use a very

small amount of isopropyl alcohol and clean with the supplied microﬁber cloth.

14 I ENGLISH

CELESTRON TWO YEAR LIMITED WARRANTY

A. Celestron warrants this product to be free from defects in materials and workmanship for two years. Celestron will repair or replace such

product or part thereof which, upon inspection by Celestron, is found to be defective in materials or workmanship. As a condition to the

obligation of Celestron to repair or replace such product, the product must be returned to Celestron together with proof-of-purchase

satisfactory to Celestron.

B. The proper Return Authorization Number must be obtained from Celestron in advance of return. Please submit your request to

Celestron’s online technical support center at https://www.celestron.com/pages/technical-support to receive the number to be

displayed on the outside of your shipping container.

All returns must be accompanied by a written statement setting forth the name, address, and daytime telephone number of the owner, together

with a brief description of any claimed defects. Parts or product for which replacement is made shall become the property of Celestron.

The customer shall be responsible for all costs of transportation and insurance, both to and from the factory of Celestron, and shall be required

to prepay such costs.

Celestron shall use reasonable efforts to repair or replace any product covered by this warranty within thirty days of receipt. In the event repair

or replacement shall require more than thirty days, Celestron shall notify the customer accordingly. Celestron reserves the right to replace any

product which has been discontinued from its product line with a new product of comparable value and function.

This warranty shall be void and of no force of effect in the event a covered product has been modiﬁed in design or function, or subjected

to abuse, misuse, mishandling or unauthorized repair. Further, product malfunction or deterioration due to normal wear is not covered

by this warranty.

CELESTRON DISCLAIMS ANY WARRANTIES, EXPRESSED OR IMPLIED, WHETHER OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE, EXCEPT AS EXPRESSLY SET FORTH

HEREIN. THE SOLE OBLIGATION OF CELESTRON UNDER THIS LIMITED WARRANTY SHALL BE TO REPAIR OR REPLACE THE COVERED PRODUCT, IN ACCORDANCE WITH THE

TERMS SET FORTH HEREIN. CELESTRON EXPRESSLY DISCLAIMS ANY LOST PROFITS, GENERAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES WHICH MAY RESULT FROM

BREACH OF ANY WARRANTY, OR ARISING OUT OF THE USE OR INABILITY TO USE ANY CELESTRON PRODUCT. ANY WARRANTIES WHICH ARE IMPLIED AND WHICH CANNOT

BE DISCLAIMED SHALL BE LIMITED IN DURATION TO A TERM OF TWO YEARS FROM THE DATE OF ORIGINAL RETAIL PURCHASE.

Some states do not allow the exclusion or limitation of incidental or consequential damages or limitation on how long an implied warranty

lasts, so the above limitations and exclusions may not apply to you.

This warranty gives you speciﬁc legal rights, and you may also have other rights which vary from state to state. Celestron reserves the right

to modify or discontinue, without prior notice to you, any model or style product. If warranty problems arise or if you need assistance in using

your product, please visit Celestron’s online technical support center at https://www.celestron.com/pages/technical-support.

FCC NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip-

ment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Product design and speciﬁcations are subject to change without prior notiﬁcation.

This product is designed and intended for use by those 14 years of age and older.

celestron.com/pages/technical-support

Telephone: 1(800) 421-9649

2835 Columbia Street • Torrance, CA 90503 USA

71221

06-19

MODE D'EMPLOI

Modèle #71221

LUNETTE DE VISION NOCTURNE NV-2

FRANÇAIS I 3

Table des matières

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Notes concernant l’utilisation en environnement de faible luminosité ou dans l’obscurité totale . . 4

Contenu de la boîte. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Accessoires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Instructions d’utilisation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Installation de la pile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Allumer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Éteindre. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Observation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Régler la luminosité de l’écran. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Régler le faisceau infrarouge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Prendre des photos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Visualiser les images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Supprimer des ﬁchiers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Enregistrer des vidéos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Régler l’heure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Zoom numérique . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Sortie vidéo. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Connexion à un ordinateur. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Gestion de l’alimentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Pile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Charger la pile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Caractéristiques techniques. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Entretien et sécurité . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Garantie limitée Celestron de deux ans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

4 I FRANÇAIS

La lunette de vision nocturne NV-2 est conçue pour être utilisée de jour ou de nuit. Elle permet l’observation standard et

par vision nocturne, la capture de photos ou l’enregistrement vidéo, ainsi que la visualisation du contenu. Le grossissement

optique est de 4,5x et le grossissement numérique est de 5x.

La lunette de vision nocturne NV-2 de Celestron est équipée d’un écran VGA couleur de 640x480 permettant une

visualisation de bonne qualité pendant l’observation diurne. De nuit, la lunette de vision nocturne NV-2 de Celestron

peut transmettre l’image d’objets situés à une distance de 200 m dans l’obscurité totale.

La lunette de vision nocturne NV-2 de Celestron enregistre tous les ﬁchiers photo et vidéo dans la carte mémoire amovible.

La carte mémoire peut contenir l’équivalent d’une demi-heure de vidéo par gigaoctet de capacité (par exemple, une carte

mémoire de 2 Go peut enregistrer 1 heure de vidéo, et une carte mémoire de 32 Go peut enregistrer 16 heures de vidéo).

La lunette de vision nocturne NV-2 de Celestron est livrée avec un câble USB 2.0. Ce câble peut être utilisé pour charger

l’unité avec une ﬁche USB (non incluse), et pour transférer des ﬁchiers enregistrés vers un ordinateur. Un câble de connexion

audio/vidéo est également inclus pour la connexion à des écrans PAL et NTSC.

Une pile au lithium-ion rechargeable AW 18650 3,7 V 2200 mAh est incluse. Cette dernière donne à la lunette de vision

nocturne NV-2 environ 2 à 3 heures d’autonomie.

NOTES CONCERNANT L’UTILISATION EN ENVIRONNEMENT

DE FAIBLE LUMINOSITÉ OU DANS L’OBSCURITÉ TOTALE

Les performances de vision nocturne de la lunette de vision nocturne NV-2 seront améliorées dans l’obscurité totale lorsque

le faisceau infrarouge est activé. Ce dernier améliore la clarté de l’image.

Réglez la molette de mise au point du faisceau infrarouge pour observer des sujets à différentes distances. La lunette de

vision nocturne NV-2 de Celestron utilise un CCD basse illumination. Il peut être utilisé dans des environnements de faible

luminosité (mais pas dans l’obscurité totale) sans que le faisceau infrarouge soit activé.

INTRODUCTION

FRANÇAIS I 5

CONTENU DE LA BOÎTE

1 Lentille de l’objectif

2 Molette de mise au point

3 Compartiment des piles

4 Faisceau infrarouge

5 Cache des ports

6-7 Bouton +/-

8 Bouton Mode

9 Bouton Entrée/Alimentation

10 Oculaire

11 Adaptateur de trépied

12 Logement pour carte mémoire

13 Port Audio/Vidéo

14 Voyant indicateur de charge

15 Port USB

ACCESSOIRES

• Câble AV

• Câble USB

• Pile au lithium-ion rechargeable

AW 18650 3,7 V 2200 mAh

• Étui de transport

• Dragonne

• Tissu de nettoyage d’objectif

6 I FRANÇAIS

Retirez le cache du compartiment de pile, insérez la pile avec

la cathode orientée vers l’intérieur, puis remettez le cache soi-

gneusement en place et allumez l’appareil. La lunette de vision

nocturne NV-2 de Celestron est prête à l’utilisation lorsque

l’écran s’illumine.

IMPORTANT :

• Utilisez exclusivement le modèle de pile correct

• La pile doit être complètement chargée

• La pile doit être installée correctement

(la cathode orientée vers l’intérieur)

ALLUMER

• Retirez le capuchon de la lentille d’objectif.

• Appuyez sur le bouton d’alimentation (9) une fois. Regardez

dans l’oculaire (10). L’appareil est en fonctionnement lorsque

l’écran s’illumine (comme illustré sur la droite).

Signiﬁ cation de l’icône :

1. Mode photo

2. Autonomie de la pile

3. La carte mémoire est installée

4. Le nombre de photos qui peuvent être enregistrées dépend

de la capacité de la mémoire.

INSTALLATION DE LA BATTERIE

INSTRUCTIONS D’UTILISATION

Cache

du compartiment des piles

ÉTEINDRE

Maintenez le bouton d’alimentation (9) appuyé pendant 3 secondes pour éteindre la lunette de vision nocturne NV-2

de Celestron.

1 2 3 4

La pagina sta caricando ...

Celestron 71221 Manuale utente

Questo manuale è adatto anche per

Celestron 71221 Manuale utente

in altre lingue

Documenti correlati

Altri documenti