Denon CD Player DN-C680 Manuale utente
- Categoria
- Controller DJ
- Tipo
- Manuale utente
Questo manuale è adatto anche per
CD PLAYER
DN-C680
OPERATING INSTRUCTIONS
IMPORTANT TO SAFET
Y
CAUTION
:
1. Handle the power supply cord carefully
Do not damage or deform the power supply cord. If it is damaged or deformed,
it may cause electric shock or malfunction when used. When removing from
wall outlet, be sure to remove by holding the plug attachment and not by pulling the cord.
2. Do not open the top cover
In order to prevent electric shock, do not open the top cover.
If problems occur, contact your DENON dealer.
3. Do not place anything inside
Do not place metal objects or spill
liquid inside the CD player.
Electric shock or malfunction may result.
Please, record and retain the Model name and serial number of your set shown on the rating label.
Model No. C-680 Serial No.
NOTE:
This CD player uses the semiconductor laser. To allow you to enjoy music at a
stable operation, it is recommended to use this in a room of 5°C (41 °F) - 35°C (95°F).
LABELS
(for U.S.A. model only)
CERTIFICATION
THIS PRODUCT COMPLIES WITH DHHS RULES 21 CFR SUBCHAPTER J
A
PPLICABLE AT DATE OF MANUFACTURE.
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR REFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
THE COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE
EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL.
CLASS 1
LASER PRODUCT
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
NOTE:
This unit may cause interference to radio and television reception if you do not operate
it in strict accordance with this OPERATING INSTRUCTIONS.
This unit complies with Class B computing device rules in accordance with the
specifications in Sub-part J or Part 15 of the FCC Rules, which are designed to provide
reasonable protection against such interference in a residential installation. If the unit
does cause interference to any radio or television reception, try to reduce it by one or
more of the following means:
a) Turn the other unit to improve reception
b) Move this unit
c) Move this unit away from others
d) Plug this unit respectively into a different AC outlet
• This is note to accordance with Section 15.838 of the FCC Rules.
2
1
CD PLAYER
DN
-
C630
OPERATING INSTRUCTIONS
BEDIENUNGSANLEITUNG
MODE D’EMPLOI
INSTRUCCIONES DE OPERACION
BRUKSANVISNING
FOR ENGLISH READERS PAGE 007 ~ PAGE 025
FÜR DEUTSCHE LESER SEITE 026 ~ SEITE 045
POUR LES LECTEURS FRANCAIS PAGE 046 ~ PAGE 065
PARA LECTORES DE ESPAÑOL PAGINA 066 ~ PAGINA 085
FÖR SVENSKA LÄSARE SIDA 086 ~ SIDA 105
OPEN / CLOSE
COMPACT DISC PLAYER
DN-C630
POWER
PHONES LEVEL
MIN MAX
STOP CUE
PRESET
PLAY / PAUSE
TRACK
PLAY
MODE
END MON INDEX
SEARCH
REPEAT
ON / OFF
PROG.PLAY
A-B
PROG. IN
PITCH
TIME
0%
SINGLE
REPEAT
2
IMPORTANT TO SAFETY
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
LABELS
(for U.S.A. model only)
CERTIFICATION
THIS PRODUCT COMPLIES WITH DHHS RULES 21 CFR
SUBCHAPTER JAPPLICABLE AT DATE OF MANUFACTURE.
CAUTION
:
1. Handle the power supply cord carefully
Do not damage or deform the power supply cord. If it is damaged or
deformed, it may cause electric shock or malfunction when used. When
removing from wall outlet, be sure to remove by holding the plug
attachment and not by pulling the cord.
2. Do not open the top cover
In order to prevent electric shock, do not open the top cover.
If problems occur, contact your DENON dealer.
3. Do not place anything inside
Do not place metal objects or spill liquid inside the CD player.
Electric shock or malfunction may result.
Please, record and retain the Model name and serial number of your set
shown on the rating label.
Model No. DN-C630 Serial No.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the
user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
NOTE:
This CD player uses the semiconductor laser. To allow you to enjoy music at a
stable operation, it is recommended to use this in a room of 5 °C (41 °F) – 35
°C (95 °F).
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS OR REFORMANCE OF PROCE-
DURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZ-
ARDOUS RADIATION EXPOSURE.
THE COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR
REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE
PERSONNEL.
CLASS 1 LASER PRODUCT
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPPARAT
,
CLASS 1
LASER
PRODUCT
,
,,
ADVARSEL: USYNLIG LASERSTRÅLING VED ÅBNING, NÅR
SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION.
UNDGÅ UDSAETTELSE FOR STRÅLING.
VAROITUS! LAITTEEN KÄYTTÄMINEN MUULLA KUIN TÄSSÄ
KÄYTTÖOHJEESSA MAINITULLA TAVALLA SAATTAA
ALTISTAA KÄYTTÄJÄN TURVALLISUUSLUOKAN 1
YLITTÄVÄLLE NÄKYMÄMTTÖMÄLLE LASERSÄTEILYLLE.
VARNING– OM APPARATEN ANVÄNDS PÅ ANNAT SÄTT ÄN I
DENNA
BRUKSANVISNING SPECIFICERATS, KAN ANVÄNDAREN
UTSÄTTAS FÖR OSYNLIG LASERSTRÅLNING SOM
ÖVERSKRIDER GRÄNSEN FÖR LASERKLASS 1.
• FOR U.S.A. & CANADA MODEL ONLY
CAUTION
TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED)
PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER
OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO
PREVENT BLADE EXPOSURE.
• POUR LES MODELES AMERICAINS ET CANADIENS
UNIQUEMENT
ATTENTION
POUR PREVENIR LES CHOCS ELECTRIQUES NE PAS UTILISER
CETTE FICHE POLARISEE AVEC UN PROLONGATEUR UNE PRISE
DE COURANT OU UNE AUTRE SORTIE DE COURANT, SAUF SI LES
LAMES PEUVENT ETRE INSEREES A FOND SANS EN LAISSER
AUCUNE PARTIE A DECOUVERT.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions : (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
This Class B digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les
exigences du Règlement sur le matériel brouilleur du Canada.
3
SAFETY INSTRUCTIONS
1. Read Instructions – All the safety and operating
instructions should be read before the applicance is
operated.
2. Retain Instructions – The safety and operating instructions
should be retained for future reference.
3. Heed Warning – All warnings on the applicance and in the
operating instructions should be adhered to.
4. Following Instructions – All opeerating and use instructions
should be followed.
5. Water and Moisture – The appliance should not be used
near water – for example, near a bathtub, washbbowl,
kitchen sink, laundry tub, in a wet basement, or near a
swimming pool, and the like.
6. Carts and Stands – The appliance should be used only with
a cart or stand that is recommended by the manufacturer.
6A. An appliance and cart
combination should be
moved with care.
Quick stops, excessive
force, and uneven
surfaces may cause
the applicance and cart
combination to overturn.
7. Wall or Ceiling Mounting – The appliance should be
mounted to a wall or ceiling only as recommended by the
manufacturer.
8. Ventilation – The appliance should be situated so that its
location or position does not interfere with its proper
ventilation. For example, the appliance should not be
situated on a bed, sofa, rug, or similar surface that may
block the ventilation openings; or, placed in a built-in
installation, such as a bookcase or cabinet that may
impede the flow of air through the ventilation openings.
9. Heat – The appliance should be situated away from heat
sources such as radiators, heat registers, stoves, or other
appliances (including amplifiers) that produce heat.
10. Power Sources – The appliance should be connected to a
power supply only of the type described in the operating
instructions or as marked on the appliance.
11. Grounding or Polarization – Precautions should be taken so
that the grounding or polarization means of an appliance is
not defeated.
12. Power-Cord Protection – Power-supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the
appliance.
14. Cleaning – The appliance should be cleaned only as
recommended by the manufacturer.
15. Power Lines – An outdoor antenna should be located away
from power lines.
16. Outdoor Antenna Grounding – If an outside antenna is
connected to the receiver, be sure the antenna system is
grounded so as to provide some protection against voltage
surges and built-up static charges. Article 810 of the
National Electrical Code, ANSI/NFPA 70, provides
information with regard to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to
an antenna-discharge unit, size of grounding conductors,
location of antenna-discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
See Figure A.
17. Nonuse Periods – The power cord of the appliance should
be unplugged from the outlet when left unused for a long
period of time.
18. Object and Liquid Entry – Care should be taken so that
objects do not fall and liquids are not spilled into the
enclosure through openings.
19. Damage Requiring Service – The appliance should be
serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged;
or
B. Objects have fallen, or liquid has been spilled into the
appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or
exhibits a marked change in performance; or
E. The appliance has been dropped, or the enclosure
damaged.
20. Servicing – The user should not attempt to service the
appliance beyond that described in the operating
instructions. All other servicing should be referred to
qualified service personnel.
FIGURE A
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL
ELECTRICAL CODE
ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
ELECTRIC
SERVICE
EQUIPMENT
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC - NATIONAL ELECTRICAL CODE
Printed in Japan 511 3345 000 808
DENON SERVICE NETWORK
•
Please contact one of our overseas service centers, listed below, for follow-up service consultation.
•
Wenden Sie sich für anfallende Wartungs-bzw. Reparaturarbeiten bitte an eine der folgend aufgeführten Kundendienststellen.
•
Adressez-vous à nos centres de service d’outre-mer indiqués ci-dessous, pour le service aprèsvente.
•
Per il servizio dopo vendita rivolgete Vi al nostro centro di servizio estero appropriato della lista seguente.
•
Para consultas de servicio porfavor dírigirse a cualquiera de nuestros centros de servicio en el extranjero, enlistados abajo.
•
Neem kontakt op met één van onze reparatie-inrichtingen in het buitenland, waarvan hier een lijst volgt, voor na-service.
•
Ta kontakt med nedan angivna servicecentraler för rådfrågning om servicearbeten efter försäljningen.
•
Favor contactar um de nossos centros de serviços internacionais, abaixo listados, para consulta de serviços de acompanhamento.
Australia AWA Audio Products Pty Ltd. 67 O’Riordan Street, Alexandria NSW 2015, Australia
Tel: (02) 9669-3477 Fax: (02) 9578-0140
Austria Digital-Professional-Audio Vertriebsges.m.b.H., 1170 Wien, Rupertusplatz 3
Tel: 0222-4501006~9, Fax: 0222-457679
Belgium Transtel-Sabima P.V.B.A. Harmoniestraat 13, 2018 Antwerpen 1, België Tel: 03-237-3607
Canada Denon Canada Inc. 17 Denison Street, Markham Ontario, Canada L3R 1B5 Tel: 905-475-4085 Fax: 905-475-4159
China Shanghai Denon Products Service Co., Ltd. Room 1504, A Building 527 Huaihai Zhong Road,
Shanghai 200020, P.R.C. Tel: (021)53062078
Czecho EUROSTAR OSTORAVA s.r.o. Za Vokovikou vozovnou 369/5, 161 00 Praha 6
Tel: 2-316-3690 Fax: 2-316-6852
Denmark Hifi Klubben A/S Dali Alle 1, 9610 Noerager, Denmark Tel: 45-96 72 10 00 Fax: 45-96 72 10 14
Finland Suomen Hi-Fi Klubi OY Nylandsgatan 4-6, Helsingfors Tel: 0644401
France Denon France S.A. 3 Boulevard Ney, 75018 Paris Tel: 44-89-68-69
F.R. Germany Denon Electronic GmbH Halskestraße 32, 40880 Ratingen Tel: 02102-4985-0
Greece KINOTECHNIKI LTD. 47 Stournara Str., Athens Tel: 380-6998
Hong Kong Denon Hong Kong Ltd., 11/F North, Somerset House 979 King’s Road, Quarry Bay, Hong Kong
Tel: 2516-6862, Fax: 2516-5940
Iceland Japis Ltd. Brautarholt 2, Box 396, 121 Reykjavik, Iceland Tel: 5625200
Indonesia PT Autoaccindo Jaya. Cideng Barat No. 7 Jakarta, Indonesia Tel: 633-2730
Italy Professional Equipment srl. 20142 Milano v.le Famagosta 37, Italy Tel: 02-89.10.241 Fax:02-81.38.032
Korea DAIYOUNG Industrial Co.,Ltd. 1027-5, Bangbae-dong, Seocho-gu, Seoul 137-060 Korea
Tel: 02-588-3960 Fax: 02-586-3721
Malaysia Pertama Audio (PJ) Sdn. Bhd. 38, 40 & 42 Jalan PJS 11/28A Sunway Metro Bandar Sunway 46510
Selangor, Malaysia Tel: 03-7378888 Fax: 03-7378188
Mexico Labrador, S.A. de C.V. Zamora No. 154 Col. Condesa 06140 Mexico, D.F. Tel: 286 55 09 Fax: 286 34 62
Netherlands Penhold B.V. Poppenbouwing 58, NL-4191 NZ Geldermalsen, Netherland Tel: 31-345-588 080 Fax: 31-345-588 085
New Zealand Avalon Audio Corpn. Limited 119 Wellesley Street, Auckland 1, New Zealand Tel: 09-779-351, 09-775-370
Norway Hi-Fi Klubben Box 70 Ankertorget, 0133 Oslo 1 Tel: 02-112218
Poland HORN DISTRIBUTION ul. Nowoursynowska 131R (wjazd od ul. Rosota) 02-975 Warszawa
Tel: 22-649-3071 Fax: 22-649-3199
Portugal Videoacustica Qta. Do Paizinho-Armazém 5-Estrada De Circunvalação-Apart. 3127 1303 Lisboa Codex
Tel: 2187004/2187096
Singapore Denon Electronics Singapore Pte Ltd. 257 Selegie Road #03-257 Selegie Complex
Singapore 188350 Tel: 65-339-1181 Fax: 65-339-8366
Spain Gaplasa S.A. Conde de Torroja, 25, 28022 Madrid Tel: 91-329-42-63
Sweden Sveriges Hi-Fi Klubb Box 5116, S-402 23 Göteborg Tel: 031-200040
Switzerland Diethelm & Co., AG. Grindelstrasse 5, 8303 Bassersdorf Tel: 01-838-1611
Taiwan R.O.C. Taiwan Kolin Co., Ltd. 10th Fl., 86, Sec. 1, Chung-king S. Rd., Taipei, Taiwan R.O.C.
Tel: (02) 314-3151 (20 Lines) Fax: (886) 02-3614037 Telex: 11102 TKOLIN
Thailand Mahajak Development Co., Ltd. 6th Fl., Mahajak Building, 46 Sukhumvit 3 (Nananua), Klongteoy,
Prakranong, Bangkok 10110 Tel: 256-0020
United Hayden Laboratories Ltd. Hayden House, Chiltern Hill, Chalfont St.
Kingdom & Eire Peter Gerrards Cross, Bucks, SL9 9UG Tel: 01753-888447
U.S.A. DENON ELECTRONICS, a Division of Deonon Corporation (U.S.A.) 222 New Road Parsippany,
NJ07054, U.S.A., Tel: 973-575-7810, Fax: 973-575-1213
*
If there is no service center in your local area, consult the outlet where the equipment was purchased.
*
Falls sich in Ihrer Nähe keine Kundendienststelle befindet, wenden Sie sich an das Geschäft, wo das Gerät gekauft wurde.
*
S’il n’y a aucun centre de service dans votre région, consultez votre revendeur.
*
Se nella Vostra zona non c’è il centro di servizio, rivolgete Vi al negozio dove avete acquistato l’apparecchio.
*
Si no hay centros de servicio en su área local, consulte en donde haya comprado su equipo.
*
Als er in uw streek geen reparatie-inrichting is, neemt u kontakt op met de vestiging waar u de apparatuur gekocht heeft.
*
Saknas servicecentral i närheten där du bor, bör kontakt tas medåterförsäljaren för apparaten.
*
Se não existir um centro de serviços em sua área local, consulte o estabelecimento onde o equipamento foi adquirido.
*
G80801
14-14, AKASAKA 4-CHOME, MINATO-KU, TOKYO 107-8011, JAPAN
Telephone: (03) 3584-8111
Cable: NIPPON COLUMBIA TOKYO Telex: JAPANOLA J22591
FRONT PANE
L
REAR PANE
L
DISPLAY
WINDOW
DIMENSIONS
5
4
NOTE ON USE
A
void high temperatures
Allow for sufficient heat dispersion
when installed on a rack.
Handle the power cord carefully. Hold
the plug when unplugging the cord.
Keep the set free from moisture,
water, and dust.
Unplug the power cord when not
using the set for long periods of time.
"(For sets with ventilation holes)
Do not obstruct the ventilation holes.
Do not let foreign objects in the set.
Do not let insecticides, benzene, and
thinner come in contact with the set.
Never disassemble or modify the set
in any way.
6
• 19 inch Rack Mountable (Height 3U)
•
Large FL Display, Illuminated Rubber Button
•
Track Search Select knob (Easy track selection)
•
Jog/ Shuttle Wheel
Perform searches to 1 frame precision using the jog dial and easy scans using the shuttle ring.
•
Program Play (Max. 25 tracks)
(1) When the PLAY mode is set to Single, the player stands by at the beginning of next track. (at Finish mode Next)
(2) When the PLAY mode is set to Continuous, the playback is continued according to your programmed sequence.
•
Play mode and Finish mode
(1) Play mode
cContinuous: Play a whole disc
dSingle: Play a track
e A-B: Play a A-B
(2) Finish mode (Stop, Next, Recue)
* only when Single Track play is selected.
cStop: Stop after finishing to play a track.
dNext: Standby at the beginning of next track after finishing to play track.
eRecue: After finishing to play a track, standby at the beginning of the track.
•
Auto Cue
After a disc is loaded, it is automatically cued to the point where audio starts. Cueing takes place at the point where audio starts rather than where the track
starts. The level at which sound is first detected can be set between -36 to -72dB (7 steps).
•
End Monitor
Pressing the END MON button during standby instantly previews the end of the track, thus assuring perfect "end point". The point at which monitoring starts can
be set within a range of 5 to 35 seconds (7 steps) prior to the track's end.
•
End of Message (EOM)
At the end of a track, the Display's EOM button flashes, providing a visual warning to the operator that the track will end shortly. The point at which the flashing
begins can be set within a range of 0 to 30 seconds (7 steps) prior to the end of the track.
•
Pitch Control (t 9.9%, 0.1 % step) e Index Search
The Select knob can be used to perform an Index Search when the INDEX button is ON. (The LED on the INDEX button light up.)
•
AUTO SPACE
During playback, it is possible to insert a silent space of about 4 seconds between tracks. To do this, simply press the AUTO SPACE button to ON.
(The LED on the AUTO SPACE button light up.)
•
AUTO EDIT
This function automatically divides the total recorded time on the disc in half and rearranges the track so that they fit nearly onto the A and B sides.
•
Display of Playback Locations
A bar graph display indicates playback points on the track being played. Elapsed time and Remaining time displays are switched using the TIME button.
•
Rich Array of External Control Terminals
Serial Remote (RS232C/RS422A switchable, D-sub 9 pin) Parallel Remote (D-sub 25 pin)
•
ACD-25FSC (FS Converter Kit) Option
Digital output is possible at 32 and 48 kHz as well as 44.1 kHz. Output frequency can be preset to 32, 44.1, or 48 kHz.
The DN-C680 CD player is a rack mount type CD player designed for use in broadcast stations, for production; etc.
MAIN FEATURES
7
CONTENTS
Checking the Contents
Check that the carton contains the following items:
3P power supply cord 1 PC.
O
p
eratin
g
instructions
(
this booklet
)
1 PC.
Installing the Units
Mount the units onto your console or rack with 19" EIA rack rails.
CAUTION:
• The DN-C680 will work normally when the player unit is mounted with the front panel within 15 degrees of the vertical plane. If the unit is tilted
excessively, discs may not load or unload properly.
DN-C580
Max. 15°
• DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product, to which this declaration relates, is in conformity with
the following standards: EN60065, EN55013, EN55020, EN60555-2 and EN60555-3. Following the provisions of
73/23/EEC, 89/336/EEC and 93/68/EEC Directive.
6. PROGRAMMED PLAYBACK ........................................................ 19~21
(1) Inputting the Program ............................................................ 19
(2) Changing the Program ........................................................19, 20
(3) Playing Programs ................................................................... 20
(4) Presetting Programs................................................................ 21
7. PRESET FUNCTIONS AND OPERATIONS .................................. 22~25
(1) List of Preset Functions ........................................................... 22
(2) Presetting Procedure ...............................................................23
(3) Detailed Description of Preset Functions .............................. 24, 25
8. BEFORE SWITCHING OFF THE POWER .......................................... 26
9. COMPACT DISCS ......................................................................... 26
10.
TROUBLESHOOTING .....................................................................27
11. SPECIFICATIONS ..........................................................................27
1. PART NAMES AND FUNCTIONS .................................................9~11
(1) Front Panel ..........................................................................9,10
(2) Rear Panel ......................................................................... 10,11
(3) Display ...................................................................................11
2. REMOTE CONTROL CONNECTION ...................................................12
3. OPENING AND CLOSING THE DISC HOLDER AND
LOADING DISCS ...........................................................................12
4. BASIC OPERATION ................................................................. 13, 14
(1) Before Starting Playback ...........................................................13
(2) Starting Playback .....................................................................14
(3) Stopping Playback ...................................................................14
(4) PLAY/PAUSE and STANDBY/CUE Operations............................... 14
5. HANDY OPERATIONS ............................................................... 15-18
(1) Starting Playback from the Middle of a Track
(Manual Search) .......................................................................15
(2) Playing at a. Different Speed (Pitch) ..........................................15
(3) Playing a Specific Section of the Disc (A-B Play) ..........................16
(4) Playing Repeatedly (Repeat) .....................................................17
(5) Inserting Blank Spaces Between Tracks (Auto Space) ..................18
(6) Dividing the Playing Time in Two (Auto Edit) ..............................18
8
PART NAMES AND FUNCTIONS
(1) Front Panel
POWER button
•
This turns the set on and off.
Disc holder
•
Place discs in this holder.
Press the OPEN/CLOSE button to open and close the disc holder.
Load discs firmly inside the slot.
OPEN/ CLOSE button
•
Press this button to open and close the disc holder. The
disc holder will not open during playback.
LEVEL control
•
Use this to adjust the volume of the headphones.
PHONES jack
•
Connect headphones with an impedance of 30 to 40 62/ohms.
STOP button
•
Press this button to turn all the servo functions off and stop. Press
this button during playback to set the stop mode.
STANBDY / CUE button
•
When this button is pressed during the play or pause mode, the
pickup returns to the position at which playback started and the
standby mode is set. (Back Cue)
• When pressed during playback when the next track has been
programmed, the programmed track is searched for and the
standby mode is set.
• The button lights when the standby mode is set.
• When the button is pressed while pressing the PLAY MODE button,
the preset mode is set.
PLAY / PAUSE button
•
Press this button in the standby, pause or manual search mode to
begin playback.
• Press the button in the stop mode to search for the first track and
begin playback.
• The button lights during the play mode.
• When the button is pressed during playback, the pause mode is set.
The button flashes while the pause mode is set.
PROG. PLAY ON/ OFF button
•
When this button is pressed while the PROGRAM IN button is lit,
the program play mode is set.
• The button will not function during the A-B play mode.
• The button lights during the program play standby and play modes.
• When the button is pressed during the program play standby or
play mode, the program play mode is cleared.
PROGRAM IN button
•
Press this button to set the program input mode.
• The button will not function during the play mode.
• The button flashes when in the program input mode.
• The button lights when a program is set.
Select knob
•
Turn this' knob to select the next track (or index number) to be
played.
• Use the INDEX button to choose whether to select tracks or index
numbers.
• Turn the knob clockwise by one click to move one track (or one
index number) forward, counterclockwise by one click to move one
track (or one index number) backward.
• When the knob turned while pressing it in, one click corresponds to
10 tracks (or 10 index numbers).
• In the preset mode, use this knob to set and enter preset settings.
• When setting programs, use this knob to select, enter and check
the program.
PLAY MODE button
•
Press this button to switch the play mode.
PITCH button
•
Press this button to switch to the play speed set with the + and
-buttons.
• The button lights when the pitch play mode is set.
• Press the button again to cancel the pitch play mode and return to
the normal speed.
+ button
•
Press this button once to increase the pitch by 0.1 %.
• Hold the button in to increase the pitch continuously.
• Press the button in the program editing mode to set the program
insert mode.
- button
•
Press this button once to decrease the pitch by 0.1%.
• Hold the button in to decrease the pitch continuously.
• Press the button in the program editing mode to clear the program.
END MON button
•
Press this button in the standby mode to monitor the end of the
track. (End Monitor)
• The button lights when the end monitor mode is set.
REPEAT button
•
Press this button to set the repeat mode.
• The button lights when the repeat mode is set.
• Press the button again to cancel the repeat mode.
A button
•
Press this button when no A point is set to set the A point.
• The button lights when the A point is set.
• When pressed while the A point is set, the A point is searched for
and the standby mode is set.
• When the button is pressed during manual search while the A point
is set, the A point changes.
B button
•
Press this button when no B point is set to set the B point.
• The button lights when the B point is set.
• When pressed while the B point is set, the B point is searched for
and the standby mode is set.
• When the button is pressed during manual search while the B point
is set, the B point changes.
9
10
Pin No. U.S.A. & Canada Europe & Asia & Others
1
Common Common
2 Cold Hot
3 Hot Cold
A
UTO CUE button
• Press this button to find the beginning of the playback signals on a
track and automatically set the standby mode at that point. (Auto
Cue)
• The button lights when the auto cue mode is set.
• Press the button again to cancel the auto cue mode.
AUTO SPACE button
• Press this button to automatically insert blank spaces of 4 seconds
between tracks during continuous playback. (Auto Space)
• The button lights when the auto space mode is set.
• Press the button again to cancel the auto cue mode.
AUTO EDIT button
• Press this button to divide the tracks on the disc into a first half
(side A) and second half (side B) at the point nearest to half of the
disc's total playing time. (Auto Edit)
• When the A button is pressed while the auto edit mode is on, the A
button lights and the number of the first track and total playing
time of the first half (side A) are displayed on the character display.
• When the B button is pressed while the auto edit mode is on, the B
button lights and the number of the first track and total playing
time of the second half (side B) are displayed on the character
display.
• Press the button again to cancel the auto edit mode.
TIME button
• Press this button to switch the time display between the remaining
time (REMAIN) and the elapsed time (ELAPSED).
INDEX button
• Press this button to set the index select mode, then use the select
knob to select the index number.
• The button lights when the index select mode is set.
• Press the button again to return to the track select mode.
FADER button
• Press this button to enable input of the fader input signals
connected to the "PARALLEL REMOTE" connector.
• The button lights when fader input signal input is enabled.
• Press the button again to cancel the mode.
FINISH MODE button
One of the following three finish modes can be selected:
• Press the STOP button to light the button and set the finish mode to
the stop mode.
• Press the NEXT button to light the button and set the finish mode to
the next mode.
• Press the RECUE button to light the button and set the finish mode
to the recue mode.
SEARCH dial (inner side)
• Turn this dial to set the manual search mode.
• Turn the dial clockwise to move the playback position forward,
counterclockwise to move the playback position backward.
• One click corresponds to one frame of movement. The playback
position can be moved anywhere between the beginning of the first
track and the end of the last track.
SCAN dial (outer side)
• Turn this dial to set the manual search (fast forward or fast reverse)
mode.
• Turn the dial clockwise to move the playback position forward,
counterclockwise to move the playback position backward.
• The speed changes according to the angle at which the dial is turned.
Rear Panel
DIGITAL OUT (BALANCED) connector
• This is an active balanced output using an XLR type connector.
• Connect this connector to the balanced digital input connector on an
amplifier or console.
• Signal format: Selectable (See Page 24, 8) 9))
• Pin layout: 1. Common
2. Cold
3. Hot
• Applicable connector: Cannon XLR-3-31 or equivalent
DIGITAL OUT (UNBALANCED) jack
• This is an unbalanced output using an RCA type jack.
• Connect this jack to the unbalanced digital input jack on an
amplifier or console.
• Signal format: Selectable (See Page 24, 8) 9))
ANALOG OUT (BALANCE) connectors
• These are active balanced outputs using XLR type connectors.
• Connect these connectors to the balanced analog input connectors
on an amplifier or console.
• Pin layout:
• Applicable connector: Cannon XLR-3-31 or equivalent
NOTE: Do not short-circuit the hot or cold pin with the common pin.
LEVEL L/R controls
• Use these controls to adjust the level of the audio-signals from the
ANALOG OUT (BALANCED) connectors.
ANALOG OUT (UNBALANCED) jacks
• These are unbalanced outputs using RCA type jacks.
• Connect these jacks to the unbalanced analog input jacks on an
amplifier or console.
RS232C/RS422A connecto
r
• This is a serial remote connector. A personal computer or other
external controller can be connected to control the DN-C680
externally.
• Applicable connector: 9-pin D-sub (female)
• Baud rate: 9600 bps or 19200 bps
• Pin layout:
RS232C RS422A
Pin no. Signal name I/0 Signal name I/0
1 NC - NC -
6 NC - S.GROUND -
2 TxD 0 TxD (RETURN) 0
7 NC - TxD 0
3 RxD I RxD I
8 NC - R x D (RETURN) I
4 NC - NC -
9 NC - NC -
5 S.GROUND - S.GROUND -
Pin no. Signal name I/O
1 FG -
14
2
PLAY tally
PLAY command
O
I
TTL(lol=20mA)
HCMOS(li=3mA)
15 PAUSE tally O TTL(lol=20mA)
3 PAUSE command I HCMOS(li=3mA)
16 STDBY/CUE tally O TTL(lol=20mA)
4 STDBY/CUE command I HCMOS(li=3mA)
17 INDEX2/INDEX3 tally O TTL(lol=20mA)
5 TRACK(+) command I HCMOS(li=3mA)
18 Tally common -
6 TRACK(-) command I HCMOS(li=3mA)
19 Reserved -
7 SEARCH(FWD) command I HCMOS(li=3mA)
20 Reserved -
8 SEARCH(REV) command I HCMOS(li=3mA)
21 Reserved -
9 FADER START command I PHOTO COUPLER
22 Tally power supply - +5V, 20mA
10 Command common - (Ii =10mA)
23 Command common -
11 NC -
24 EOM tally O TTL(lol=20mA)
12 Reserved -
25 Reserved -
13 Reserved -
NOTE: The tally output pin has open collector IC specifications (Imax. 20
mA, Vmax. 5V), but the maximum supply current is 80 mA, so use
with a total load current of 80 mA or less.
A
C inlet
•
Connect the included power cord here.
11
TRACK No. display
•
This indicates the track number at the current position. The track
number flashes during the track search operation and when
switching to the standby mode.
INDEX No. display
•
This indicates the index number at the current position. If the next
index is scheduled, that index number flashes on the INDEX No.
display. The index number also flashes during the index search
operation.
PLAY MODE indicators
•
"A-B" lights when in the A-B play mode.
• "SINGLE" lights when in the single track play mode.
TIME MODE indicators
•
"ELAPSED" lights when the elapsed time is displayed.
• "REMAIN" lights when the remaining time is displayed.
NEXT No. display
•
This displays the number of the next track to be played.
Playing time display
•
This indicates the time of the current position, in minutes (m),
seconds (s) and frames (f).
Character display
This displays operation messages in the preset and program
modes.
Playing position display
•
This indicates the current position within the track's total playing
time.
PITCH display
•
This indicates the set play speed in %.
EOM indicator
•
This lights when the EOM is preset, and starts flashing when the
EOM set time is reached.
REPEAT indicator
•
This lights when the repeat mode is set.
PLAY LOCK indicator
•
This lights when the PLAY LOCK is preset.
(See Page 25,17))
PROGRAM indicator
•
This lights when the PROG. PLAY ON/OFF mode is set.
(3) Display
RS232C /RS422A selector switch
Use this to switch the serial remote connector signal between
RS232C and RS422A according to the external controller's signal.
REMOTE connector
This is a parallel remote connector. Use it to control the DN-C680
with dry contact circuit connections. Applicable connector: 25-pin
D-sub (male) Connector signal layout:
CAUTION:
• Do not place any foreign objects in the disc tray, and do not place more than one disc in the disc tray at a time. Doing so may result in malfunction.
• Do not push the disc tray in manually when the power is off, as this may result in malfunction and damage the player.
12
REMOTE CONTROL CONNECTIONS
To control the DN-C680 remotely, refer to the example of remote control connections given below.
The rating of REMOTE connector pin 22 (TALLY POWER SUPPLY) is +5 V, 80 mA maximum.
Avoid currents in excess of the rating.
OPENING AND CLOSING THE DISC HOLDER AND LOADING DISCS
(1) Opening and closing the disc holde
r
• This operation only works when the power is on.
• Press the OPEN /CLOSE button to open or close the disc holder.
• The disc holders cannot be opened during playback to prevent playback from being interrupted if the OPEN/CLOSE button is pressed accidentally.
Stop playback, then press the OPEN/CLOSE button.
(2) Loading discs
•
Hold the disc by the edges and place it in the disc tray, Do not touch the signal surface (the glossy side).
• When using 12cm discs, place the disc in the outer tray guides, and when using 8cm discs, place them securely in the inner guides.
BASIC OPERATION
13
(2) Startin
g
Playback
(3) Stoppin
g
Playback
Sleep mode
The sleep mode is set if no operation is performed for 30 min-
utes in the standby, pause or manual search mode.
When in the sleep mode, press the PLAY/PAUSE button to search
for the position before the sleep mode was set and start
playback. Press the STANDBY/CUE button to search for the
position before the sleep mode was set and standby at that point.
14
• The operation switches between playback and pause each time
the PLAY/PAUSE button is pressed.
• When the STANDBY/CUE button is pressed during playback, the
pickup returns to the position at which playback was started.
The diagrams below show playback patterns when the PLAY/PAUSE
and STANDBY/CUE buttons are pressed.
When the PLAY/PAUSE button is pressed, playback starts and proceeds as
shown by the arrow on the diagram above.
If the PLAY/PAUSE button is pressed again during playback, the pause
mode is set at that point. Press the PLAY/PAUSE button again to resume
playback.
When the STANDBY/CUE button is pressed after starting playback by
pressing the PLAY/PAUSE button, the pickup returns to the position at
which playback was started and prepares for the next playback.
Press the PLAY/PAUSE and STANDBY/ CUE buttons alternately to start
playback repeatedly from the same position.
This function is called "Back Cue".
If the pause mode is set and playback is then resumed, the position to
which the pickup returns with the Back Cue function changes.
(4) PLAY /PAUSE and STANDBY/ CUE Operations
HANDY OPERATIONS
(1) Startin
g
Playback from the Middle of a Track (Manual
Search)
• When a track is selected and the PLAY/PAUSE button is pressed,
playback starts from the beginning of that track. To start from a
different position in the track, use the procedure described below
to find the desired position.
(2) Playin
g
at a Different Speed (Pitch)
• Use this function to play discs at different speeds.
• The speed can be changed within the range of -9.9 to +9.9%.
NOTE:
When the play speed (PITCH) is set, the display shows the set
pitch, but the disc is played at the standard speed until the
PITCH button is pressed (and the button is lit). When the play
speed is changed, the sampling frequency of the digital output
signal also changes, so it may not be possible to receive digital
si
g
nals.
15
16
NOTE:
The following happens if either the A or B point is not set:
• If only the A point is set, the B point is automatically set at
the end of the track for which the A point is set.
• If only the B point is set, the A point is automatically set at
the beginning of the track for which the B point is set.
If the playing time of the A-B section is shorter than the total
of the set fade in and fade out times, the fade in and fade out
settings are ignored.
When the B point is before the A point, the section from the B
point to the A point is played.
(3) Playin
g
a Specific Section of the Disc (
A
-B Play)
• Use this function to set the play start and end positions and only
play the desired section of the disc.
NOTE: The A-B play mode cannot be set unless the A point, B point
or both the A and B points are set.
17
A
-B repeat pla
y
(4) Playin
g
Repeatedly (Repeat)
(5) Insertin
g
Blank Spaces Between Tracks (Auto Space)
• Use this function to insert blank spaces of 4 seconds between
tracks durin
g
continuous
p
la
y
back.
(6) Dividin
g
the Playin
g
Time in Two (Auto Edit)
• Use this function to divide the total playing time of the disc into
side A
(
first half
)
and side B
(
second half
)
.
NOTE:
When non-consecutive tracks are played (when the search op-
eration is performed), a blank space of over 4 seconds may be
inserted automatically.
18
19
PROGRAMMED PLAYBAC
K
• The tracks can be programmed to play in a certain order.
• Up to 25 tracks can be programmed.
• Programmed playback is performed according to the play mode
(single or continuous) and finish mode (stop, next or recue) settings.
(
2
)
Chan
g
in
g
the Pro
g
ram
To exit the program editing mode, press the PROGRAM IN but-
ton. The set returns to the normal mode.
20
(
3
)
Pla
y
in
g
Pro
g
rams
21
(4) Presetting Programs
• Programs can be stored in the preset memory. When a disc for which a program is preset is loaded, the programmed playback mode is set
automatically.
• Programs can be stored for up to three discs.
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
Denon CD Player DN-C680 Manuale utente
- Categoria
- Controller DJ
- Tipo
- Manuale utente
- Questo manuale è adatto anche per
in altre lingue
- English: Denon CD Player DN-C680 User manual
Documenti correlati
-
Denon DCD-3500RG Manuale del proprietario
-
-
-
-
-
Denon DCM-5000 Manuale utente
-
-
-