D-Link DES-1526 Manuale utente

D-Link DES-1526

Web-Smart 26-Port Ethernet Switch with

24 10/100Mbps 802.3af Power Over Ethernet Ports

&

2 10/100/1000Mbps Combo Gigabit Ethernet Ports

Manual

First edition

Building Networks for People

i

FCC Warning

This equipment has been tested and found to comply with the limits

for a Class A digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with this

manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause

harmful interference in which case the user will be required to correct

the interference at his own expense.

CE Mark Warning

This is a Class A product. In a domestic environment, this product may

cause radio interference in which case the user may be required to take

adequate measures.

Warnung!

Dies ist ein Produkt der Klasse A. Im Wohnbereich kann dieses

Produkt Funkstoerungen verursachen. In diesem Fall kann vom

Benutzer verlangt werden, angemessene Massnahmen zu ergreifen.

Precaución!

Este es un producto de Clase A. En un entorno doméstico, puede

causar interferencias de radio, en cuyo case, puede requerirse al

usuario para que adopte las medidas adecuadas.

Attention!

ii

Ceci est un produit de classe A. Dans un environnement domestique,

ce produit pourrait causer des interférences radio, auquel cas

l`utilisateur devrait prendre les mesures adéquates.

Attenzione!

Il presente prodotto appartiene alla classe A. Se utilizzato in ambiente

domestico il prodotto può causare interferenze radio, nel cui caso è

possibile che l`utente debba assumere provvedimenti adeguati.

VCCI Warning

BSMI Warning

iii

TABLE OF CONTENTS

Table of Contents.........................................................................................iii

About This Manual........................................................................................1

Purpose...................................................................................................1

Terms/Usage..........................................................................................1

Introduction.....................................................................................................2

Fast Ethernet Technology....................................................................2

Gigabit Ethernet Technology...............................................................3

Switching Technology..........................................................................4

VLAN (Virtual Local Area Network)...................................................5

Power over Ethernet (PoE) ...................................................................6

Features...................................................................................................6

Unpacking and Installation...........................................................................8

Unpacking...............................................................................................8

Installation..............................................................................................8

Installing the Switch on a Desktop.....................................................9

Installing the Switch on a Rack.........................................................10

Connecting Network Cables ..............................................................11

AC Power..............................................................................................12

Identifying External Components...............................................................14

iv

Front Panel............................................................................................14

LED Indicator:..............................................................................14

10/100Mbps PoE Ports (Port 1~24):..........................................14

1000BASE-T Gigabit Ethernet Ports (Port 25~26):.................15

mini-GBIC Ports (Port 25F~26F):...............................................15

Reset:............................................................................................16

Rear Panel.............................................................................................16

Understanding LED Indicators...................................................................17

System LEDs ........................................................................................17

POWER:........................................................................................17

Power Maximum (PWR MAX)..................................................17

CPU: Management Indicator.....................................................18

Fast Ethernet PoE Port Status LEDs (Port 1 ~ 24)...........................18

Link/ACT: Link/Activity............................................................18

100Mbps.......................................................................................18

PoE Status....................................................................................18

Gigabit Ethernet Port Status LEDs....................................................19

Link/ACT: Link/Activity............................................................19

1000Mbps.....................................................................................19

100Mbps.......................................................................................19

v

mini-GBIC (Use Combo ports or SFP)......................................19

Configuration................................................................................................20

Installing the Web Management Utility...........................................20

Discovery List......................................................................................21

Monitor List..........................................................................................22

View Trap.....................................................................................23

Add Item.......................................................................................24

Delete Item...................................................................................24

Device Setting......................................................................................24

Configuration Setting.................................................................24

Password Change.......................................................................25

Firmware Upgrade.......................................................................26

Web Access................................................................................26

Toolbar..................................................................................................27

File TAB.......................................................................................27

View TAB.....................................................................................27

Option TAB.................................................................................28

Help TAB.....................................................................................28

Configuring the Switch.......................................................................28

Login......................................................................................................29

vi

Setup Menu..........................................................................................31

Configuring Setup Setting..................................................................32

Port Settings................................................................................32

802.1Q VLAN Settings (Virtual Local Area Network)............34

Trunk Setting...............................................................................37

Mirror Setting..............................................................................38

SNMP Setting..............................................................................39

PoE Setting...................................................................................47

Device Status...............................................................................50

Statistics.......................................................................................52

System Setting.............................................................................53

Trap Setting.................................................................................55

Set Password ...............................................................................57

Backup Setting............................................................................58

Reset Setting................................................................................59

Logout..........................................................................................59

Technical Specifications..............................................................................58

1

ABOUT THIS MANUAL

Congratulations on your purchase of the DES-1526. This Switch

integrates 100Mbps Fast Ethernet and 10Mbps Ethernet network

capabilities in a highly flexible package. Since this Switch’s Port-1

to Port-24 are Power over Ethernet (PoE) ports, it will

automatically detect the presence of IEEE 802.3af-

compliant devices and will provide power through these

PoE ports. The Switch provides up to 15.4Watts per port

and can be connected to WLAN access points, IP phones,

video cameras, and other PD devices. The Switch will

automatically detect the network appliance’s requirements,

and the Switch will supply the required power current to

each appliance.

Purpose

Thismanualdiscusses how to install your DES-1526.

Terms/Usage

In this manual, the term “Switch” (first letter upper case) refers to

your DES-1526 and “switch” (first letter lower case) refers to other

Ethernet switches.

2

INTRODUCTION

This chapter describes the features of the DES-1526 and some

background information about Fast Ethernet, Gigabit Ethernet,

Switching, VLAN, and Power over Ethernet technologies.

Fast Ethernet Technology

The growing importance of LANs and the increasing complexity

of desktop computing applications are fueling the need for high

performance networks. A number of high-speed LAN

technologies have been proposed to provide greater bandwidth

and improve client/server response times. Among them,

100BASE-T (Fast Ethernet) provides a non-disruptive, smooth

evolution from the current 10BASE-T technology. The non-

disruptive and smooth evolution nature, and the dominating

potential market base, virtually guarantees cost-effective and high

performance Fast Ethernet solutions.

100Mbps Fast Ethernet is a standard specified by the IEEE 802.3

LAN committee. It is an extension of the 10Mbps Ethernet

standard with the ability to transmit and receive data at 100Mbps,

while maintaining the CSMA/CD Ethernet protocol. Since

100Mbps Fast Ethernet is compatible with all other 10Mbps

Ethernet environments, it provides a straightforward upgrade and

takes advantage of the existing investment in hardware, software,

and personnel training.

3

Gigabit Ethernet Technology

Gigabit Ethernet is an extension of IEEE 802.3 Ethernet utilizing

the same packet structure, format, and support for CSMA/CD

protocol, full-duplex, flow control, and management objects, but

with a tenfold increase in theoretical throughput over 100Mbps

Fast Ethernet and a one hundred-fold increase over 10Mbps

Ethernet. Since it is compatible with all 10Mbps and 100Mbps

Ethernet environments, Gigabit Ethernet provides a

straightforward upgrade without wasting a company's existing

investment in hardware, software, and trained personnel. The

increased speed and extra bandwidth offered by Gigabit Ethernet

are essential to coping with the network bottlenecks that

frequently develop as computers and their busses get faster and

more users use applications that generate more traffic. Upgrading

key components, such as your backbone and servers to Gigabit

Ethernet can greatly improve network response times as well as

significantly speed up the traffic between your sub-networks.

Gigabit Ethernet enables support for video conferencing, complex

imaging, and similar data-intensive applications. Likewise, since

data transfers occur 10 times faster than Fast Ethernet, servers

outfitted with Gigabit Ethernet NIC's are able to perform 10 times

the number of operations in the same amount of time. In addition,

the phenomenal bandwidth delivered by Gigabit Ethernet is the

most cost-effective method to take advantage of today and

tomorrow's rapidly improving switching and routing

internetworking technologies.

4

Switching Technology

Another approach to pushing beyond the limits of Ethernet

technology is the development of switching technology. A switch

bridges Ethernet packets at the MAC address level of the

Ethernet protocol transmitting among connected Ethernet or Fast

Ethernet LAN segments.

Switching is a cost-effective way of increasing the total network

capacity available to users on a local area network. A switch

increases capacity and decreases network loading by dividing a

local area network into different segments, which do not compete

with each other for network transmission capacity.

The switch acts as a high-speed selective bridge between the

individual segments. The switch, without interfering with any

other segments, automatically forwards traffic that needs to go

from one segment to another. By doing this the total network

capacity is multiplied, while still maintaining the same network

cabling and adapter cards.

Switching LAN technology is a marked improvement over the

previous generation of network bridges, which were characterized

by higher latencies. Routers have also been used to segment local

area networks, but the cost of a router, the setup, and

maintenance required make routers relatively impractical. Today

switches are an ideal solution to most kinds of local area network

congestion problems.

5

VLAN (Virtual Local Area Network)

A VLAN is a group of end-stations that are not constrained by

their physical location and can communicate as if a common

broadcast domain, a LAN. The primary utility of using VLAN is to

reduce latency and the need for routers, using faster switching

instead. Other VLAN utility includes:

u Security: Security is increased with the reduction of opportunity in

eavesdropping on a broadcast network because data will be

switched to only those confidential users within the VLAN.

u Cost Reduction: A VLAN can be used to create multiple broadcast

domains, thus eliminating the need of expensive routers.

u 802.1Q VLAN: The VLAN tagging option is a standard set by the

IEEE to facilitate the spanning of VLANs across multiple switches.

(Reference: IEEE Std 802.1Q-1998 Virtual Bridged Local Area

Networks.)

6

Power over Ethernet (PoE)

Power over Ethernet (PoE) integrates power and data onto one

single cabling infrastructure, eliminating the need to have AC

power available at all locations.

Power and Data are integrated onto the same cable. Supporting

category 5/5e up to 100 Meters, PoE will provide power to PoE

compatible devices, such as IP telephones, wireless LAN access

points, and IP security cameras.

PoE is already widely adopted in the market, saving up to 50% of

overall installation costs by eliminating the need to install

separate electrical wiring and power outlets.

Features

u 24×10/100Mbps Auto-negotiation Fast Ethernet RJ-45 ports PoE

enabled

u 2 x 1000BASE-T/mini-GBIC combo Gigabit Ethernet ports

u Compliant with 802.3af specification

u Supports PoE power up to 15.4W for each PoE port

u Supports PoE power maximum 170W for the device

u Supports PoE Powered Device (PD) classification identify

u Each port supports auto MDI/MDIX, so there is no need to use

cross-over cables or an up-link port

u Full-duplex transfer mode for speed of 10Mbps, 100Mbps, and

1000Mbps

u Half-duplex transfer mode for speed of 10Mbps and 100Mbps

u Wire speed reception and transmission

7

u Store-and-Forward switching scheme capability to support rate

adaptation and ensure data integrity

u Up to 4K unicast addresses entities per device, self-learning, and

table aging

u 768KBytes packet buffer

u Supports IEEE 802.3x flow control for full-duplex mode ports

u Supports Back-pressure flow control for half-duplex mode ports

u Supports 802.1Q VLAN

u Supports Port-based Trunking

u Supports Port-mirroring

u Supports Port-setting for Speed/Disable, Flow control, and Port

based QoS (Quality of Service)

u Easy configuration via Web Browser

u Easy setting via Web Management Utility

u Standard 19” Rack-mount size

8

UNPACKING AND INSTALLATION

This chapter provides unpacking and installation information for

the Switch.

Unpacking

Open the shipping cartons of the Switch and carefully unpacks its

contents. The carton should contain the following items:

u One DES-1526

u One AC power cord, suitable for your area’s electrical power

connections

u Four rubber feet to be used for shock cushioning

u Screws and two mounting brackets

u CD-ROM with Web Management Utility and Manual

If any item is found missing or damaged, please contact your local

reseller for replacement.

Installation

The site where you install the Switch stack may greatly affect its

performance. When installing, consider the following pointers:

u Install the Switch in a fairly cool and dry place. See Technical

Specifications for the acceptable temperature and humidity

operating ranges.

u Install the Switch in a site free from strong electromagnetic

field generators (such as motors), vibration, dust, and direct

exposure to sunlight.

9

u Leave at least 10cm (4 in.) of space at the front and rear of the

Switch for ventilation.

u Install the Switch on a sturdy, level surface that can support

its weight, or in an EIA standard-size equipment rack. For

information on rack installation, see the next section, titled

Rack Mounting.

u When installing the Switch on a level surface, attach the

rubber feet to the bottom of each device. The rubber feet

cushion the Switch and protect the Switch case from

scratching.

Installing the Switch on a Desktop

When installing the Switch on a desktop or shelf, the rubber feet

included with the Switch should first be attached. Attach these

cushioning feet on the bottom at each corner of the device. Allow

enough ventilation space between the Switch and any other

objects in the vicinity.

Figure 1. Installed on a Desktop

10

Installing the Switch on a Rack

The Switch can be mounted in an EIA standard-size, 19-inch rack,

which can be placed in a wiring closet with other equipment.

Attach the mounting brackets at the Switch’s front panel (one on

each side), and secure them with the provided screws.

Figure 2. Combine the Switch with the provided screws.

Then, use screws provided with the equipment rack to mount

each switch in the rack.

11

Figure 3. Mount the Switch in the rack.

Connecting Network Cables

The Switch supports 24 10/100BASE-TX Fast Ethernet PoE

enabled ports and 2 1000BASE-T/mini-GBIC combo ports. These

24 PoE ports will be automatically activated when a compatible

terminal is identified. The Switch will supply power through the

PoE port to the connected PD.

For Legacy devices that are not yet compatible, the PoE port will

not offer the power to these devices. This feature allows users to

freely and safely mix legacy and Power over Ethernet compatible

devices on their network.

The Switch supports 10Mbps Ethernet or 100Mbps Fast Ethernet

and it runs both in half- and full- duplex mode using two pairs of

Category 5 cables.

The Switch also supports 2 1000BASE-T/mini-GBIC combo Gigabit

Ethernet ports. When using the RJ-45 ports, it runs in Auto-

negotiation mode with 10/100Mbps that runs in both half- and full-

duplex mode and 1000Mbps that runs in full-duplex mode using four

pair Category 5. When using the mini-GBIC ports, it runs in optional

1000BASE-SX/LX fiber connectivity with mini-GBIC transceiver

module. The Combo Gigabit Ethernet port will run only one of the

mini-GBIC ports or RJ-45 ports The mini-GBIC port priority is higher

than the RJ-45 port, therefore if both the mini-GBIC port and RJ-45

port are connected, then only the mini-GBIC will activate.

13

be turned on without having any or all LAN segment cables

connected.

La pagina sta caricando ...

D-Link DES-1526 Manuale utente

Questo manuale è adatto anche per

D-Link DES-1526 Manuale utente

in altre lingue

Documenti correlati

Altri documenti