Handspring TREO 600 Manuale utente

using your

Treo

Includes setup information

and instructions for most tasks

Copyright

and may be registered in some jurisdictions. Handspring, Blazer and the Handspring logo are trademarks of

Handspring, Inc., are registered trademarks in the U.S.A., and may be registered in other jurisdictions. Palm OS and

HotSync are registered trademarks, and Palm and the Palm Powered logo are trademarks, of PalmSource, Inc., and

are used by Handspring under license. This product contains ACCESS Co., Ltd.’s NetFront 3.0 Internet browser

registered trademark of ACCESS Co., Ltd. in Japan and in other countries except the United States of America.

NetFront is a registered trademark of NetFront Communications, Inc. in the United States of America and is used

under a license. All other trademarks and trade names are the property of their respective owners.

Disclaimer and limitation of liability

Handspring, Inc. and its suppliers assume no responsibility for any damage or loss resulting from the use of this guide.

Handspring, Inc. and its suppliers assume no responsibility for any loss or claims by third parties that may arise

through the use of this software. Handspring, Inc. and its suppliers assume no responsibility for any damage or loss

caused by deletion of data as a result of malfunction, dead battery, or repairs. Be sure to make backup copies of all

important data on other media to protect against data loss.

Warranty information

In order to obtain warranty service, you must receive warranty service authorization by contacting Handspring within

the warranty period and provide dated proof of original purchase. For further information about the warranty service

procedure, please visit the Handspring website for your region, or start at www.handspring.com.

Software download available

Palm™ Desktop software is supplied on a CD-ROM disc. If you do not have access to a CD-ROM drive for your

computer, you can download this software from www.handspring.com.

50-1076-00

Contents

3 Contents

5 Welcome

6 If you read nothing else...

7 read this now: getting started

8

What you’ll need

9 Treo overview

12 Charging the battery

13 Inserting the SIM card

14 Turning Treo on and off

15 Making your ﬁrst call

17 ﬁrst day: learning the basics

18

Moving around the Treo screen

22 Using the keyboard

25 Launching applications

27 Setting up your computer

30 Synchronizing contacts and other

personal data

31 Battery life

32 Where to learn more

33 ﬁrst week: using phone,

web, and messaging

34

Phone overview

36 Dialing calls

39 Receiving calls

40 Using voicemail

42 Managing active calls

43 More ways to manage calls

47 Managing contacts

49 Deﬁning Favorites buttons

52 Using a phone headset

53 Browsing the web

60 Taking pictures with the camera

64 SMS

69 MMS

73 Sending and receiving messages

with Mail

81 ﬁrst two weeks: using

organizer features

82

Calendar

87 To Do List

90 Memo Pad

91 CityTime

93 Calculator

95 Looking up contacts and other information

97 Beaming information

99 ﬁrst month: managing

applications

100

Installing applications

103 Removing applications

104 Using Application Info

105 Using expansion cards

4 :: Table of Contents

109 when you’re ready:

customizing your Treo

110

Phone settings

113 System Sound settings

114 Display and appearance

116 Applications Launcher settings

117 Button settings

118 Date and time settings

120 General Preferences

121 Locking your phone and data

127 if something happens: help

128

Upgrading from another Palm Powered

device

130 Trouble installing Palm Desktop?

131 Resetting your Treo

133 Screen

134 Network connection

137 Synchronization (HotSync)

140 Mail

143 Web

144 Camera

145 Third-party applications

146 Errors

147 Making room on your Treo

148 glossary

150

FCC

151 Index

158 Speciﬁcations

Welcome :: 5

Welcome

Congratulations on the purchase of your Handspring™ Treo™

phone. You now have

• an advanced mobile phone*

•a Palm Powered™ organizer with portable expansion

capability (SD media)

•a digital camera

• email*

• web browsing*

•SMS*

•MMS**

all in one compact and indispensable device.

*

Requires service contract with your mobile service provider

**

MMS requires MMS services running on GPRS

This guide will help you set up your Treo and quickly learn

to use it.

LOOK HERE: Don’t miss

the helpful tips and cross-

references given in this

column.

If you read nothing else...

This guide is designed to get you using your Treo quickly, starting with just the basics. As you become

more comfortable with your Treo and want to learn more, come back and read the other sections.

6 :: If you read nothing else...

Read this Now: Getting Started

Follow the instructions on pages 7-16 to set up

your Treo and make your ﬁrst call.

First Day: Learning the Basics

Read through pages 17-32 to learn how to

enter text, move around the screen and set up

synchronization.

First Week: Using Phone,

Web and Messaging

Learn how to use all the great wireless features

of your Treo on pages 33-80, including phone,

email, web browsing, and messaging.

First Two Weeks: Using Organizer Features

Your Treo is not just a phone. It also includes a

full-featured Palm Powered organizer that gives

you instant access to your Calendar, To Do List,

Memo Pad, CityTime, Calculator, and more. See

pages 81-98.

First Month: Managing Applications

Explore pages 99-108 to learn how to add or

delete extra applications and use an expansion

card with your Treo.

When You’re Ready: Customizing your Treo

Once you’ve learned the basics, you’ll want to

explore additional features on your Treo and

customize its settings. See pages 109-126 for

information about these features.

If Something Happens: Help

If something goes wrong or you can’t ﬁgure out

how to use a Treo feature, we can help. See

pages 127-147 for the answers to frequently

asked questions.

read this now: getting started :: 7

read this now:

getting

started

What you’ll need

As you work through the instructions in this guide, you’ll need all the items

that came in the Treo box (see page 9) as well as the following:

•a SIM card for which you have an activated mobile account with data

services

*

•a location with wireless coverage for your phone

• an electrical outlet

•the computer with which you will synchronize your personal data

• the CD included in the box

*

We recommend choosing the GPRS data service option. You cannot use email, web

browsing, or picture messaging without data services of some type.

8 :: What you’ll need

Treo overview

You should have received all of the following components in the Treo box:

Hardware

•Treo handset

•AC charger

•USB HotSync

®

cable

• headset

• electrical socket adapter(s) (if required in region)

Documentation and software

• Using Your Treo (this book)

• Synchronization software CD

Treo handset features

The following illustrations show the locations and names of the physical

features of the Treo. Refer back to these illustrations while following the

instructions in this guide.

A. Antenna

B. Wireless Mode button

C. Infrared (IR) port

D. Ringer switch

E. Stylus

F. Expansion card slot

G. SIM slot

E

C

B

F

G

A

D

Treo overview :: 9

You can purchase a separate

serial HotSync cable and

other accessories. For more

information, visit

www.handspring.com.

10 :: Treo overview

A. Phone receiver

B. LED (Wireless Mode and charge indicator)

C. Volume buttons

D. Phone

E. Calendar

F. Headset jack

G. HotSync and power supply connector

H. Microphone

I. Messaging

J. Screen on/off button

K. 5-way navigation control

Be careful not to scratch

or crush your Treo’s

touchscreen. Do not store

it in a place where other

items might damage it.

Treo overview :: 11

A. SIM slot

B. Camera lens

C. Speaker

D. Reset button

E. Reset tool (within stylus)

IMPORTANT: Treo’s speaker

includes a large magnet, so

be sure not to store your

Treo near credit cards or

other items that could be

demagnetized.

Charging the battery

Before using your Treo, you need to charge the battery. It may not turn on at

all when you ﬁrst remove it from the box. We recommend three hours for a

full charge, or until the LED is solid green.

1. Plug the AC charger into a wall outlet. If necessary, connect an adapter.

2. Connect the charger cable to the bottom of the Treo with the word UP

facing the same way as your Treo screen.

A. LED

3. To conﬁrm your Treo is charging, check the LED.

•When the LED is solid red, your Treo is charging.

•When the LED turns solid green, your Treo is fully charged.

• If the LED does not turn on when you connect your Treo to the

charger, double-check the cable connection and the electrical outlet

to which it is connected.

After you turn on your Treo, the onscreen battery gauge displays power status:

• Full battery icon : Battery is charged

• Partial battery icon : Battery has some power and is not charging

• Empty battery icon : Battery needs charging immediately

• Red lightning bolt : Charging

• Green lightning bolt with full battery : Fully charged

A

12 :: Charging the battery

Battery consumption varies

based on your personal

usage. Consumption factors

include signal strength,

backlight and speakerphone

usage, and whether calls

are data or voice calls.

Inserting the SIM card

Your Subscriber Identity Module (SIM) card contains account information such

as your phone number and voicemail access number. To use the phone, email,

or web features of your Treo, you need to insert the SIM card. If a SIM card

did not come with your Treo, your mobile service provider will give you one

when you subscribe. If you have an older, 5-volt SIM card, you should request

a newer, 3-volt SIM. This Treo is not compatible with older 5-volt SIM cards.

A. SIM tray

B. SIM card

C. Notches

D. SIM slot

1. Slide the SIM tray out of the Treo.

2. Insert the SIM card into the SIM tray by aligning the notches until you

feel it lock into place.

3. Slide the SIM tray back into the Treo.

4. If your SIM card is not already activated, follow the activation steps

provided by your mobile service provider or contact them directly for

assistance. If you want to use email, web browsing, and MMS, be sure to

conﬁrm that your SIM card is activated for data services.

A

B

D

C

Your mobile service

provider may already have

inserted the SIM card into

your Treo. In that case,

skip to page 14.

To remove the SIM card,

pull the SIM tray out of the

slot and remove the card

from the tray.

Inserting the SIM card :: 13

Turning Treo on and off

You can use the Palm OS features of your Treo independently of the

wireless features and applications. Therefore, the screen and Wireless Mode

are designed to be turned off and on separately.

Turning the screen on and off

1. Press the Screen button to turn on the screen.

2. Brieﬂy press the Screen button to turn off the screen.

Turning Wireless Mode on and off

Wireless Mode allows your Treo to connect to a mobile network so that you

can make and receive phone calls and use other wireless services.

1. Press and hold the Wireless Mode button to turn on Wireless Mode.

You will hear a series of ascending tones. When Wireless Mode is on,

your Treo connects to a mobile network, and you can use the phone and

Internet features (if supported by the local network).

2. Press and hold the Wireless Mode button again to turn off Wireless

Mode. You will hear a series of descending tones. When Wireless Mode

is off, your Treo does not have a connection to any mobile network. You

can still use the organizer and other Palm OS features. This is ideal for

airplane ﬂights and for maximizing battery life.

14 :: Turning Treo on and off

Treo includes a keyboard

backlight for nighttime use.

The keyboard backlight

activates automatically when

the screen turns on, but

shuts off if the keyboard is

not in use. When the screen

is on, press Option then the

P key to manually activate

the keyboard backlight.

Making your ﬁrst call

We recommend that you charge your Treo for a full three hours (or until the

LED is solid green) before using it for the ﬁrst time.

1. Press and hold the Wireless Mode button . You will hear a series of

ascending tones.

2. If a Welcome screen appears, follow the onscreen instructions to set up

your Treo.

3. Allow the Treo to complete a network search. The search may take several

seconds. When it is complete, the network status icon appears in the

upper right.

4. If prompted for a PIN, enter it on the PIN screen. The default PIN is often

1234. Otherwise, your mobile service provider may have given you some

documentation with this information. Contact your mobile service provider

for help.

5. Press Phone .

6. Using the number pad on the Treo keyboard, type the desired phone

number.

7. P ress Center to dial.

8. When your call is complete, use the 5-way navigation control to choose

Hang Up.

Making your ﬁrst call :: 15

If No Service appears in the

upper left, you are out of a

wireless coverage area. If

you believe you are in a

wireless coverage area and

this problem persists, contact

your mobile service provider

for assistance.

If the Welcome screen does

not appear, recalibrate the

touchscreen. This ensures

that the screen responds

accurately to taps (see

page 133).

Learn how to quickly redial

your most recent calls on

page 38.

Adjusting call volume

While a call is in progress, press the volume buttons on the side of your Treo

to adjust call volume.

A. Volume buttons

What’s my number?

1. Make sure Wireless Mode is on (see page 14).

2. Press Phone .

3. Press Menu .

4. From the Options menu, choose Phone Info (/I). If your phone number is

not displayed, exit Phone Info, and make sure your SIM card is properly

inserted in the SIM slot. If your phone number still does not appear in

Phone Info, consult your mobile service provider.

A. Look here for your phone number

16 :: Making your ﬁrst call

ﬁrst day: learning the basics :: 17

ﬁrst day:

learning

the basics

Moving around the Treo screen

To move around the Treo screen, you can use the 5-way navigation control,

or tap items on the screen with the stylus. With use, you will ﬁnd your own

favorite way to scroll, highlight, and select menu commands.

The 5-way navigation control includes Right, Left, Up, Down, and

Center buttons.

A. Up

B. Down

C. Left

D. Right

E. Center

Scrolling through screens

As on a computer, you scroll on the Treo to move from ﬁeld to ﬁeld, or page

to page, or in some cases to highlight an item or option in a list. There are

several methods of scrolling:

•Press the 5-way navigation control on the front of the Treo. Pressing

Right , Left , Up , and Down moves to the next ﬁeld, button,

or action in that direction.

A

B

CD

E

18 :: Moving around the Treo screen

Some third-party applications

may not work with 5-way

navigation, and you must use

the stylus instead.

In this guide, we use arrow

icons to indicate directions

on your Treo’s 5-way

navigation control. These are

different from any onscreen

arrows that you tap with

your stylus or select with

the 5-way control to display

pick lists.

5-way buttons:

On screen arrows:

•Tap an onscreen scroll arrow:

•Press Option and Up or Down to scroll to the next page of

information within the current record.

•When inside a text ﬁeld, press Up and Down to scroll through

the text.

• Drag the slider of an onscreen scroll bar.

Highlighting items

The 5-way navigation control lets you highlight items before launching or

selecting them.

•When an onscreen button (OK, Cancel, etc.) or pick list is highlighted, the

button acquires a blue glow around its border.

•When a phone number, email address or web link is highlighted on a web

page or in a message, the text appears in reverse type (light text on a

dark background).

•When an entire text entry ﬁeld is highlighted, you can press Center to

edit the text. After you edit the text, press Center again to highlight the

entire ﬁeld.

Moving around the Treo screen :: 19

Once you’ve launched an

application (see page 25),

you can experiment with

using the navigation control

to highlight different screen

elements.

You can also use the stylus to highlight text on the screen. When text is

highlighted it appears in reverse type.

• Drag the stylus across the text you want to highlight.

•Double-tap a word to highlight it.

•Triple-tap a line of text to highlight it.

Accessing command buttons

Command buttons, such as New, OK, and Details appear at the bottom of

the screen. In many cases you can jump directly to these buttons instead of

scrolling to them.

•From a list screen, such as the Contacts list or Mail inbox, press Right to

jump to the ﬁrst button.

•From a screen where you create or edit entries, such as Edit Contacts or

Day View in Calendar, press Center to jump to the ﬁrst button.

•From a dialog box, such as the Edit Categories, press Right to scroll to

the ﬁrst button, or press Option then Return for OK, or Option

then Backspace for Cancel.

Choosing or activating items

After highlighting an item with the 5-way navigation control, you can choose

or activate it by pressing Center. You can also choose an item by tapping it

with the stylus.

Selecting menu items

Many applications have menus to provide access to additional features.

These menus are usually hidden from view, but they appear when you

press Menu . To get the most out of your Treo, it’s a good idea to

familiarize yourself with the additional features available through the

various application menus.

20 :: Moving around the Treo screen

La pagina sta caricando ...

Handspring TREO 600 Manuale utente

Questo manuale è adatto anche per

Handspring TREO 600 Manuale utente

in altre lingue

Altri documenti