Lexmark 4227 PLUS Manuale utente

4227 plus

User’s Guide

First Edition (November 1998)

The following paragraph does not apply to any country where such provisions are inconsistent

with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS”

WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT

NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in

certain transactions, therefore, this statement may not apply to you.

This publication could include technical inaccuracies or typographical errors. Changes are

periodically made to the information herein; these changes will be incorporated in later editions.

Improvements or changes in the products or the programs described may be made at any time.

UNITED STATES GOVERNMENT RESTRICTED RIGHTS

This software and documentation are provided with RESTRICTED RIGHTS. Use, duplication or

disclosure by the Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the

Rights in Technical Data and Computer Software clause at DFARS 252.227-7013 and in applicable

FAR provisions: Lexmark International, Inc., Lexington, KY 40550.

iii

Contents

Chapter 1 - Getting Started. . . . . . . . . . . . . . . . . . . . 1

Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Installing the Ribbon Cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Connecting the Parallel Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Connecting the Serial Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Connecting the Power Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Changing the Serial Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Verifying Serial Interface Settings . . . . . . . . . . . . . . . . . . . . . . . . 13

Printing the Demonstration Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Setting the Language of the Operator Panel Messages . . . . . . . . . . . 16

Installing Your Application Software . . . . . . . . . . . . . . . . . . . . . . . . . . 18

PPDS Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Epson Emulation Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

What to do Next . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Chapter 2 - Features and Functions . . . . . . . . . . . 21

Front View of Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Rear View of Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Chapter 3 - Using the Operator Panel . . . . . . . . . . 27

Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Using the Function Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Overview of Function Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Menu Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Setting the Printer Online or Offline . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Stopping the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Advancing the Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Using Tear-off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Auto Tear-off Set to On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Contents

iv

Contents

One Second Tear-off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Manual Tear-off (Auto Tear-off Set to Off). . . . . . . . . . . . . . . . . 43

Setting Auto Tear-off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Setting AutoGap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

AutoGap Set to On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Manual AutoGap (AutoGap Set to Off) . . . . . . . . . . . . . . . . . . . 44

AutoGap Set to Single . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Selecting or Locking a Font or Pitch . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Setting and Using a Macro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Disabling/Enabling the Operator Panel . . . . . . . . . . . . . . . . . . . . . . . 48

Chapter 4 - Selecting and Loading Paper. . . . . . . 49

Paper Types and Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Single Sheets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Multiple Part Single Sheets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Single Continuous Forms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Multiple Part Continuous Forms . . . . . . . . . . . . . . . . . . . . . . . . . 51

Envelopes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Multiple Part Forms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Loading a Single Sheet or Envelope . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Loading a Single Sheet or Envelope into the Manual Feed . . . 52

Setting Auto Cut Sheet Load. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Loading a Single Sheet or Envelope With Continuous Forms

Already Loaded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Loading Continuous Forms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Aligning the Left Margin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Top-Of-Form (TOF) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Setting TOF for Continuous Forms . . . . . . . . . . . . . . . . . . . . . . . 69

Setting TOF for Single Sheets and Envelopes. . . . . . . . . . . . . . . 70

Setting TOF in a Macro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Tearoff . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Changing Tearoff position. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Adjusting Bidirectional Alignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

v

Contents

Chapter 5 - Printer Options . . . . . . . . . . . . . . . . . . 75

Auto Sheet Feeder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Installing the Auto Sheet Feeder . . . . . . . . . . . . . . . . . . . . . . . . . 77

Loading Paper in the Auto Sheet Feeder. . . . . . . . . . . . . . . . . . . 80

Tractor 2 Feeder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Installing the Tractor 2 Feeder . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Loading Paper in the Tractor 2 Feeder . . . . . . . . . . . . . . . . . . . . 90

Parking Continuous Forms and Changing Tractor Feeders. . . 97

Removing the Tractor 2 Feeder. . . . . . . . . . . . . . . . . . . . . . . . . . . 99

Chapter 6 - Solving Printer Problems . . . . . . . . . 101

Testing the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

Clearing Paper Jams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

Problem Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

Problems Indicated by Error Codes or Messages . . . . . . . . . . 103

Paper Feed Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106

Printing and Print Quality Problems. . . . . . . . . . . . . . . . . . . . . 107

Alarm and Abnormal Noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109

Power Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110

Operator Panel Button Problem . . . . . . . . . . . . . . . . . . . . . . . . . 110

Display Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110

Chapter 7 - Maintaining Your Printer. . . . . . . . . . 113

Cleaning the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113

Cleaning the Auto Sheet Feeder Rollers . . . . . . . . . . . . . . . . . . . . . . 113

Removing the Ribbon Cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114

Appendix A - Notices . . . . . . . . . . . . . . . . . . . . . . .117

Appendix B - Statement of Limited Warranty . . .123

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125

Contents

vi

Contents

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129

Getting Started

Chapter

Chapter 1: Getting Started

1

Getting Started

1

Unpacking

1

Remove the printer from the carton.

Caution:

Do not lift the printer by yourself; it weighs

21 kilograms (46 pounds).

If any items are missing or damaged, contact your point of purchase.

If you need to purchase a parallel printer cable, we recommend

Power Cord

Reference Card

Printer

Registration

Card

Ribbon Cartridge

Acoustic Cover

User’s Guide

Chapter 1: Getting Started

2

Getting Started

Lexmark part number 1329605 (3.05 m or 10 ft.) or 1427498 (6.1 m or 20

ft.).

If you need to purchase an RS-232 serial cable, we recommend

Lexmark part number 1038693 (15.3 m or 50 ft.).

2

Place the printer so the front of the printer aligns with the edge of the

desk or table.

Note: If you want to print more than 100 forms, make sure they stack

up below the printer (on the floor) when they are finished

printing to prevent jams.

3

Remove all packing tape from the printer.

4

Pull up the left and right latches on the top cover and lift the top cover

to remove it.

Left Latch

Right Latch

Top Cover

3

Chapter 1: Getting Started

Getting Started

5 Remove the protective cardboard.

Installing the Ribbon Cartridge

1 Make sure the printer is Off.

2

Make sure the top cover is removed. If you need help, see

step 4 on page 2.

Chapter 1: Getting Started

4

Getting Started

3 Manually move the printhead to the side of the printer as shown.

4 Rotate the ribbon advance knob counterclockwise to ensure the ribbon

feeds smoothly. If necessary, untwist the ribbon.

5

Chapter 1: Getting Started

Getting Started

5 Manually move the ribbon guide to the side of the cartridge, as shown,

then rotate the ribbon advance knob to take up any slack in the ribbon.

6 Insert the ribbon guide over the metal pins on each side of the

printhead.

7

Manually move the printhead to the center position.

8 Align and insert the left and right side tabs of the ribbon cartridge into

the slots in the side frames.

Ribbon Guide

Pins

Chapter 1: Getting Started

6

Getting Started

Press down firmly on the ribbon cartridge to snap it into place.

9 Make sure the ribbon feeds smoothly by rotating the ribbon advance

knob counterclockwise.

7

Chapter 1: Getting Started

Getting Started

10 Replace the top cover.

11

Attach the acoustic cover.

a Align the notches on the acoustic cover with the slots on the top

cover.

Chapter 1: Getting Started

8

Getting Started

b Snap the acoustic cover into place.

c Close the acoustic cover.

Connecting the Parallel Cable

You will need to connect either a parallel cable or a serial cable to the printer.

If you are installing a serial cable, see “Connecting the Serial Cable” on page

10 for help.

1 Make sure your computer and the printer is Off.

2

Unplug your computer and printer.

9

Chapter 1: Getting Started

Getting Started

3 Connect the parallel cable. This cable is not supplied with your printer.

An IEEE 1284-compliant parallel cable such as Lexmark part number

1329605 (3.05 m or 10 ft.) or 1427498

(6.1 m or 20 ft.) is recommended.

Note: You do not need to attach a grounding wire to the computer.

4

Fasten the clip wires to the parallel cable. You will hear a click.

5

Connect the other end of the parallel cable to your computer.

6 Continue with “Connecting the Power Cord” on page 11.

Chapter 1: Getting Started

10

Getting Started

Connecting the Serial Cable

1

Make sure both the printer and your computer are turned off and

unplugged.

2 Connect the serial cable. The cable is not supplied with your printer.

We recommend Lexmark’s null modem RS-232 (DB 25 Female to DB

25 Male) serial cable, part number 1038693 (50 ft.).

Note: You do not need to attach a grounding wire to the computer.

3

Tighten the screws.

4

Connect the other end of the serial cable to your computer.

11

Chapter 1: Getting Started

Getting Started

Connecting the Power Cord

1

Make sure the printer is Off.

2

Connect the smaller end of the power cord to the printer.

3 Connect the other end of the power cord to a properly grounded

electrical outlet.

Changing the Serial Settings

1 Turn the printer On.

Power Switch

Chapter 1: Getting Started

12

Getting Started

2 Press Menu to enter the function menu.

3

Press Item ↓ until Interface Opt. appears on the display.

4 Press Next

→

and the default interface setting appears.

5

To change the default, press Next

→

and then Item

↓

until the

interface option you want appears. Press Store.

Note: You must select Auto or Serial to access serial settings.

6 Press Prev. ← to go back to the interface level.

7

To change the serial settings:

a

Press Item

↓

until Data speed (baud rate) appears.

b Press Next →.

c

Press Item

↓

until the appropriate data speed setting appears.

d Press Store to save the setting. An asterisk (*) appears next to the

setting you selected.

e

Press Prev. ← .

Power

Ready

AutoGap

Tractor2

Check

Interface Opt.

Load

Unload

Start/

Stop

LineFeed FormFeed

Pitch

Item 

Item 

Micro 

Item 

Next 

Micro 

Item 

Prev. 

Font

Item 

Tear Off

Item 

Store

Menu/

Quit

Item 

Menu/

Quit

13

Chapter 1: Getting Started

Getting Started

f Repeat steps a through e for each serial setting.

8

Press Quit to exit the function menu.

Verifying Serial Interface Settings

1 Make sure that forms are loaded.

Note: If you need help loading continuous forms, see “Loading

Continuous Forms” on page 62.

2

On the operator panel, press Menu.

3 Press Item ↓ or Item ↑ until Print Settings appears.

4

Press Start to print the current printer-function settings.

Note: If the settings are not what you expected, see “Using the

Function Menus” on page 31 to change them.

5 Press Quit to exit the function menu.

Printing the Demonstration Page

The following steps explain how to load a single sheet of paper so you can

print the demonstration page. If you want to load continuous forms, see

“Loading Continuous Forms” on page 62.

1 Turn the printer On.

Note: To temporarily stop the Paper Out alarm, press the Start/Stop

button.

2

Move the paper select lever up to the single sheets position.

Chapter 1: Getting Started

14

Getting Started

3 Pull the paper supports up.

4

Open the manual feed door.

Paper Supports

Paper Select Lever

La pagina sta caricando ...

Lexmark 4227 PLUS Manuale utente

Questo manuale è adatto anche per

Lexmark 4227 PLUS Manuale utente

in altre lingue

Documenti correlati

Altri documenti