Lexmark MS315 Manuale utente

MS315, MS415, & M1140+

Machine Type 4514-335, -530, -539

Service Manual

• Start diagnostics

• Maintenance

• Safety and notices

• Trademarks

• Index

April 03, 2014 www.lexmark.com

P/N 12G3397

Product information

Product name:

MS315, MS415, M1140+

Machine type:

4514

Model(s):

335, 530, 539

Edition notice

April 03, 2014

The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL,

INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED

TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of

express or implied warranties in certain transactions; therefore, this statement may not apply to you.

This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these

changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any

time.

References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all

countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product,

program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual

property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services,

except those expressly designated by the manufacturer, are the user’s responsibility.

Trademarks

Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other

countries.

PrintCryption is a trademark of Lexmark International, Inc.

Mac and the Mac logo are trademarks of Apple Inc., registered in the U.S. and other countries.

PCL® is a registered trademark of the Hewlett-Packard Company. PCL is Hewlett-Packard Company’s designation of a set of printer commands

(language) and functions included in its printer products. This printer is intended to be compatible with the PCL language. This means the

printer recognizes PCL commands used in various application programs, and that the printer emulates the functions corresponding to the

commands.

All other trademarks are the property of their respective owners.

P/N 12G3397

4514

Table of contents

Product information.....................................................................................2

Edition notice...............................................................................................2

Notices and safety information..................................................................11

Laser notices............................................................................................................................................11

Safety information...................................................................................................................................14

Preface.......................................................................................................19

Service manual conventions....................................................................................................................19

General information...................................................................................21

Media guidelines.....................................................................................................................................21

Paper guidelines ...............................................................................................................................................21

Using specialty media .......................................................................................................................................25

Supported paper sizes, types, and weights ......................................................................................................26

Data security notice.................................................................................................................................29

Tools required for service........................................................................................................................29

Diagnostic information...............................................................................31

Troubleshooting overview.......................................................................................................................31

Performing the initial troubleshooting check ...................................................................................................31

Power‑on Reset (POR) sequence ......................................................................................................................31

Fixing print quality issues........................................................................................................................32

Initial print quality check ..................................................................................................................................32

Gray background or toner fog check ................................................................................................................32

Blank pages check.............................................................................................................................................33

Solid black pages check.....................................................................................................................................34

Repeating defects check ...................................................................................................................................35

Shadow images check .......................................................................................................................................35

Skewed print check...........................................................................................................................................36

Streaked horizontal or vertical lines appear on prints check............................................................................38

Toner smear check............................................................................................................................................38

Toner specks appear on prints check ...............................................................................................................39

Paper jams...............................................................................................................................................40

Avoiding jams....................................................................................................................................................40

Understanding jam messages and locations.....................................................................................................41

200 paper jams ................................................................................................................................................. 43

201 paper jams ................................................................................................................................................. 50

4514

Table of contents

3

202 paper jams ................................................................................................................................................. 52

23y paper jams .................................................................................................................................................55

241 paper jams ................................................................................................................................................. 57

242 paper jams ................................................................................................................................................. 60

25y paper jams .................................................................................................................................................64

Understanding the printer messages......................................................................................................66

Cartridge, imaging unit mismatch [41.xy].........................................................................................................66

Cartridge low [88.xy].........................................................................................................................................66

Cartridge nearly low [88.xy]..............................................................................................................................66

Cartridge very low, [x] estimated pages remain [88.xy] ...................................................................................66

Change [paper source] to [custom string] load [orientation]...........................................................................67

Change [paper source] to [custom type name] load [orientation]...................................................................67

Change [paper source] to [paper size] load [orientation] ................................................................................67

Change [paper source] to [paper type] [paper size] load [orientation]............................................................67

Close front door ................................................................................................................................................67

Complex page, some data may not have printed [39]......................................................................................68

Configuration change, some held jobs were not restored [57] ........................................................................ 68

Credentials invalid. Print job canceled..............................................................................................................68

Defective flash detected [51]............................................................................................................................68

Imaging unit low [84.xy] ...................................................................................................................................68

Imaging unit nearly low [84.xy] ........................................................................................................................68

Imaging unit very low, [x] estimated pages remain [84.xy] ..............................................................................68

Incorrect paper size, open [paper source] [34] ................................................................................................69

Insert tray [x] ....................................................................................................................................................69

Insufficient memory to support Resource Save feature [35]............................................................................69

Insufficient memory to collate job [37] ............................................................................................................69

Insufficient memory, some Held Jobs were deleted [37] ................................................................................. 69

Insufficient memory for Flash Memory Defragment operation [37]................................................................70

Insufficient memory, some held jobs will not be restored [37]........................................................................70

Load [paper source] with [custom string] [orientation] ...................................................................................70

Load [paper source] with [custom type name] [orientation] ...........................................................................70

Load [paper source] with [paper size] [orientation] .........................................................................................71

Load [paper source] with [paper type] [paper size] [orientation] ....................................................................71

Load Manual Feeder with [custom type name] [orientation] ..........................................................................71

Load Manual Feeder with [custom string] [orientation] ..................................................................................71

Load Manual Feeder with [paper size] [orientation] ........................................................................................72

Load Manual Feeder with [paper type] [paper size] [orientation] ...................................................................72

Memory full [38] ...............................................................................................................................................72

Network [x] software error [54] .......................................................................................................................72

Non‑Lexmark [supply type], see User’s Guide [33.xy] ......................................................................................72

Not enough free space in flash memory for resources [52] .............................................................................73

Print quota exceeded. Print job canceled.........................................................................................................73

Print quota exceeded. Print job incomplete. ....................................................................................................73

Printer had to restart. Last job may be incomplete..........................................................................................73

Reinstall missing or unresponsive cartridge [31.xy] .........................................................................................74

4514

Table of contents

4

Reinstall missing or unresponsive imaging unit [31.xy]....................................................................................74

Remove paper from standard output bin.........................................................................................................74

Replace cartridge, 0 estimated pages remain [88.xy].......................................................................................74

Replace cartridge, printer region mismatch [42.xy] .........................................................................................74

Replace imaging unit, 0 estimated pages remain [84.xy] .................................................................................75

Replace unsupported cartridge [32.xy] ............................................................................................................75

Replace unsupported imaging unit [32.xy] .......................................................................................................75

Serial option [x] error [54] ................................................................................................................................75

Standard network software error [54]..............................................................................................................76

SMTP server not set up. Contact system administrator. ..................................................................................76

Standard parallel port disabled [56] .................................................................................................................76

Standard USB port disabled [56].......................................................................................................................76

Too many flash options installed [58]...............................................................................................................76

Too many trays attached [58]...........................................................................................................................77

Unformatted flash detected [53]......................................................................................................................77

Unsupported option in slot [x] [55] .................................................................................................................. 77

Weblink server not set up. Contact system administrator. ..............................................................................77

User attendance messages (0–99.99).....................................................................................................77

User attendance messages (0‑99.99) ...............................................................................................................77

Toner cartridge smart chip contact service check ............................................................................................79

Imaging unit smart chip contact service check .................................................................................................80

Toner smart chip compatibility service check...................................................................................................80

Imaging chip compatibility service check .........................................................................................................81

Media size mismatch service check ..................................................................................................................81

Insufficient memory service check ...................................................................................................................82

Printer/cartridge mismatch service check ........................................................................................................83

Flash full service check......................................................................................................................................83

Imaging unit low service check .........................................................................................................................84

Toner cartridge low service check ....................................................................................................................84

Printer hardware errors..........................................................................................................................85

111 errors .........................................................................................................................................................85

121 errors .........................................................................................................................................................87

126 errors .........................................................................................................................................................88

132 errors .........................................................................................................................................................89

133 errors .........................................................................................................................................................90

140 errors .........................................................................................................................................................91

155 errors .........................................................................................................................................................92

171 errors .........................................................................................................................................................93

Steps before starting the 9yy service checks ....................................................................................................94

900 errors .........................................................................................................................................................96

912 errors .......................................................................................................................................................101

94y errors........................................................................................................................................................101

950–958 errors ...............................................................................................................................................101

959 errors .......................................................................................................................................................104

4514

Table of contents

5

96y errors........................................................................................................................................................105

97y errors........................................................................................................................................................106

98y errors........................................................................................................................................................106

99y errors........................................................................................................................................................107

Base printer symptoms...................................................................................................................................107

Dead machine service check...........................................................................................................................107

Controller board service check .......................................................................................................................108

Control panel button service check ................................................................................................................109

Control panel service check ............................................................................................................................110

Toner starvation service check .......................................................................................................................110

USB print service check...................................................................................................................................111

Network service check....................................................................................................................................112

Input option hardware errors...............................................................................................................115

3yy error messages .........................................................................................................................................115

Option tray pick/lift motor service check .......................................................................................................117

Option tray separator/pass through motor service check..............................................................................117

Option tray ACM motor service check............................................................................................................118

Option tray controller card service check.......................................................................................................118

Service menus..........................................................................................119

Understanding the printer control panel..............................................................................................119

Using the printer control panel.......................................................................................................................119

Understanding the colors of the indicator and Sleep button lights................................................................120

Menus list..............................................................................................................................................120

Diagnostics menu..................................................................................................................................121

Entering the Diagnostics menu.......................................................................................................................121

Status/Supplies ...............................................................................................................................................121

Registration.....................................................................................................................................................121

Print Tests .......................................................................................................................................................122

Print Quality Pages..........................................................................................................................................122

Hardware Tests ............................................................................................................................................... 123

Duplex Tests....................................................................................................................................................124

Input Tray Tests ..............................................................................................................................................126

Output Bin Tests ............................................................................................................................................. 127

Base Sensor Test .............................................................................................................................................128

Device Tests ....................................................................................................................................................128

Printer Setup...................................................................................................................................................129

EP Setup ..........................................................................................................................................................130

Reports ...........................................................................................................................................................132

Event Log ........................................................................................................................................................132

Exit Diags.........................................................................................................................................................133

Configuration menu..............................................................................................................................134

Entering the Configuration menu ...................................................................................................................134

4514

Table of contents

6

Status/Supplies ...............................................................................................................................................134

Print Quality Pages..........................................................................................................................................134

Reports ...........................................................................................................................................................134

Tray Linking.....................................................................................................................................................134

Panel Menus ...................................................................................................................................................135

PPDS Emulation ..............................................................................................................................................135

Download Emuls ............................................................................................................................................. 135

Safe Mode.......................................................................................................................................................135

Factory Defaults..............................................................................................................................................135

Energy Conserve .............................................................................................................................................136

Paper Prompts ................................................................................................................................................136

Envelope Prompts...........................................................................................................................................136

Action for Prompts..........................................................................................................................................137

Font Density....................................................................................................................................................137

Font Sharpening..............................................................................................................................................137

Reduced Curl...................................................................................................................................................137

A5 Loading ......................................................................................................................................................138

UI Automation ................................................................................................................................................138

Clear Supply Usage History .............................................................................................................................138

Clear Custom Status........................................................................................................................................138

USB Speed.......................................................................................................................................................139

Automatically Display Error Screens ...............................................................................................................139

USB PnP ..........................................................................................................................................................139

Entering Invalid engine mode................................................................................................................139

Entering Recovery mode.......................................................................................................................140

Accessing the Network SE menu...........................................................................................................140

Service engineer menu..........................................................................................................................140

Accessing the service engineer (SE) menu...................................................................................................... 140

Service engineer (SE) menu ............................................................................................................................140

Repair information...................................................................................143

Removal precautions.............................................................................................................................143

Data security notice ........................................................................................................................................143

Handling ESD‑sensitive parts ..........................................................................................................................143

Controller board/control panel replacement .................................................................................................144

Restoring the printer configuration after replacing the controller board ......................................................145

Restoring solutions, licenses, and configuration settings ...............................................................................148

Updating the printer firmware ....................................................................................................................... 149

Using the flash drive...................................................................................................................................149

Using a network computer.........................................................................................................................150

Backing up eSF solutions and settings ............................................................................................................150

Ribbon cable connectors ................................................................................................................................151

Zero Insertion Force (ZIF) connectors ........................................................................................................151

4514

Table of contents

7

Horizontal top contact connector ..............................................................................................................152

Horizontal bottom contact connector........................................................................................................155

Vertical mount contact connector .............................................................................................................158

Horizontal sliding contact connector .........................................................................................................161

Low Insertion Force (LIF) connector........................................................................................................... 164

Printhead assembly adjustments....................................................................................................................165

Removal procedures.............................................................................................................................168

Left side removals.................................................................................................................................168

Left cover removal ..........................................................................................................................................168

Main drive gearbox removal...........................................................................................................................169

MPF solenoid removal ....................................................................................................................................171

MPF gearbox removal.....................................................................................................................................174

Reverse solenoid removal...............................................................................................................................177

ACM clutch removal........................................................................................................................................178

Cartridge gearbox removal .............................................................................................................................183

Duplex gear assembly removal .......................................................................................................................183

Right side removals...............................................................................................................................185

Right cover removal........................................................................................................................................185

Cooling fan duct removal................................................................................................................................186

Cooling fan removal........................................................................................................................................186

Controller board removal ...............................................................................................................................187

Toner cartridge smart chip contact removal ..................................................................................................188

Front removals......................................................................................................................................190

Left front mount removal ...............................................................................................................................190

Right front mount removal .............................................................................................................................192

Transfer roll removal ......................................................................................................................................194

Cartridge plunger removal..............................................................................................................................195

Bezel removal ................................................................................................................................................. 198

Nameplate removal ........................................................................................................................................199

Control panel assembly removal ....................................................................................................................199

UICC removal ..................................................................................................................................................202

MPF assembly removal...................................................................................................................................203

MPF pick roller cover removal ........................................................................................................................ 206

MPF pick roller removal..................................................................................................................................206

Bail removal ....................................................................................................................................................207

Jam access cover removal...............................................................................................................................207

Front door removal.........................................................................................................................................208

Front access cover removal ............................................................................................................................211

Front door sensor removal .............................................................................................................................211

Front input guide removal ..............................................................................................................................212

Separator pad removal ...................................................................................................................................214

Bottom removals...................................................................................................................................216

Power supply removal ....................................................................................................................................216

Power supply shield removal.......................................................................................................................... 217

4514

Table of contents

8

Duplex removal............................................................................................................................................... 218

Duplex sensor and input sensor removal ....................................................................................................... 219

Toner density sensor removal ........................................................................................................................221

Trailing edge sensor removal..........................................................................................................................222

ACM assembly removal ..................................................................................................................................226

Rear side removals................................................................................................................................232

Dust cover removal.........................................................................................................................................232

Rear door and cover removal .........................................................................................................................232

Narrow media/bin full sensor removal...........................................................................................................233

Redrive assembly removal ..............................................................................................................................235

Redrive shaft removal.....................................................................................................................................236

Fuser removal .................................................................................................................................................238

Top side removals.................................................................................................................................239

Top cover removal ..........................................................................................................................................239

Laser scanning unit (LSU) removal..................................................................................................................240

250/550-sheet option tray removals....................................................................................................242

Pick roller removal ..........................................................................................................................................242

Separator roll assembly removal ....................................................................................................................243

ACM assembly removal ..................................................................................................................................245

Component locations...............................................................................249

Exterior locations..................................................................................................................................249

Front view .......................................................................................................................................................249

Rear view ........................................................................................................................................................250

Maintenance............................................................................................251

Inspection guide....................................................................................................................................251

Lubrication specification.......................................................................................................................251

Cleaning the printer..............................................................................................................................252

Parts catalog............................................................................................254

Legend...................................................................................................................................................254

Assembly 1: Covers................................................................................................................................255

Assembly 2: Electronics 1......................................................................................................................257

Assembly 3: Electronics 2......................................................................................................................259

Assembly 4: Frame................................................................................................................................262

Assembly 5: Option trays......................................................................................................................265

Assembly 6: Power cords......................................................................................................................267

Assembly 7: Miscellaneous...................................................................................................................269

4514

Table of contents

9

Appendix A: Printer specifications............................................................271

Product power consumption.................................................................................................................271

Electrical specifications.........................................................................................................................271

Operating clearances.............................................................................................................................272

Acoustics...............................................................................................................................................272

Operating environment.........................................................................................................................273

Appendix B: Options and features............................................................275

Available internal options.....................................................................................................................275

Media handling options.........................................................................................................................275

Appendix C: Theory of operation..............................................................277

POR sequence.......................................................................................................................................277

Printer control.......................................................................................................................................277

Paper path information.........................................................................................................................277

Input tray ........................................................................................................................................................277

Multipurpose feeder (MPF) ............................................................................................................................277

Simplex printing ..............................................................................................................................................278

Duplex printing ...............................................................................................................................................279

Media handling components.................................................................................................................280

Main drive gearbox.........................................................................................................................................280

Autocompensator mechanism (ACM) ............................................................................................................280

Key components....................................................................................................................................281

Sensors............................................................................................................................................................281

Other key components ...................................................................................................................................282

Electrophotographic process (EP process)............................................................................................283

Appendix D: Acronyms.............................................................................287

Index........................................................................................................289

Part number index...................................................................................295

Part name index.......................................................................................299

4514

Table of contents

10

Notices and safety information

Laser notices

Laser notice

The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, Chapter I, Subchapter J for Class I

(1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 60825-1.

Class I laser products are not considered to be hazardous. The printer contains internally a Class IIIb (3b) laser that is

nominally a 7 milliwatt gallium arsenide laser operating in the wavelength of 655-675 nanometers. The laser system

and printer are designed so there is never any human access to laser radiation above a Class I level during normal

operation, user maintenance, or prescribed service condition.

Laser-Hinweis

Der Drucker wurde in den USA zertifiziert und entspricht den DHHS-Vorschriften 21 CFR, Kapitel I, Unterkapitel J für

Laserprodukte der Klasse I (1); andernorts ist er als Laserprodukt der Klasse I zertifiziert, das den IEC 60825-1-

Anforderungen entspricht.

Laserprodukte der Klasse I werden nicht als gefährlich eingestuft. Der Drucker enthält im Inneren einen Laser der

Klasse IIIb (3b), und zwar einen 7-Milliwatt-Gallium-Arsenid-Laser, der im Wellenlängenbereich von 655 bis 675

Nanometern arbeitet. Das Lasersystem und der Drucker sind so konstruiert, dass unter normalen Betriebsbedingungen,

bei der Wartung durch den Benutzer oder bei den vorgeschriebenen Wartungsbedingungen Menschen keiner

Laserstrahlung ausgesetzt sind, die die Werte für Klasse I überschreitet.

Avis relatif à l'utilisation du laser

L'imprimante est certifiée conforme aux exigences de la réglementation des Etats-Unis relative aux produits laser (DHHS

21 CFR, Chapter I, Subchapter J for Class I (1)). Pour les autres pays, elle est certifiée conforme aux exigences des normes

IEC 60825-1 relatives aux produits laser de classe I.

Les produits laser de Classe I ne sont pas considérés comme dangereux. L'imprimante contient un laser de classe IIIb

(3b), laser arséniure de gallium 7 milliwatts opérant sur une longueur d'onde de l'ordre de 655 à 675 nanomètres. Le

système laser ainsi que l'imprimante ont été conçus de manière à ce que personne ne soit exposé à des rayonnements

laser dépassant le niveau de classe I dans le cadre d'un fonctionnement normal, de l'entretien par l'utilisateur ou de la

maintenance.

Avvertenze sui prodotti laser

La stampante è certificata negli Stati Uniti come stampante conforme ai requisiti DHHS 21 CFR, Capitolo I, Sottocapitolo

J per i prodotti laser di Classe I (1), mentre in altri paesi è certificata come prodotto laser di Classe I conforme ai requisiti

IEC 60825-1.

I prodotti laser di Classe I non sono considerati pericolosi. La stampante contiene un laser di Classe IIIb (3b), che è

nominalmente un laser ad arseniuro di gallio a 7 milliwatt funzionante a una lunghezza d'onda di 655-675 nanometri.

Il sistema laser e la stampante sono stati progettati in modo da impedire l'esposizione a radiazioni laser superiori al

livello previsto dalla Classe I durante le normali operazioni di stampa, manutenzione o assistenza.

4514

Notices and safety information

11

Aviso de láser

Esta impresora se ha certificado en EE. UU. de conformidad con los requisitos de DHHS 21 CFR, capítulo I, subcapítulo

J, para los productos láser de Clase I (1), y en otros países está certificada como un producto láser de Clase I de acuerdo

con los requisitos de IEC 60825-1.

Los productos láser de Clase I no se consideran peligrosos. La impresora contiene un láser interno de Clase IIIb (3b) que

nominalmente es un láser de arseniuro de galio de 7 milivatios que funciona en una longitud de onda de 655-675

nanómetros. El sistema láser y la impresora se han diseñado para que ningún individuo acceda nunca a las radiaciones

láser por encima del nivel de Clase I durante su uso normal, ni en tareas de mantenimiento o intervenciones de servicio

técnico prescritas.

Aviso sobre laser

A impressora foi certificada nos EUA por estar em conformidade com os requisitos do DHHS 21 CFR, capítulo I,

subcapítulo J, para produtos a laser de Classe I (1) e, nos demais países, foi certificada como produto a laser de Classe

I em conformidade com os requisitos da IEC 60825-1.

Os produtos a laser de Classe I não são considerados perigosos. A impressora contém, internamente, um laser de Classe

IIIb (3b) que é um laser de arsenieto de gálio de 7 miliwatts operando no comprimento de onda de 655-675 nanômetros.

O sistema do laser e a impressora foram projetados para que jamais haja acesso humano à radiação do laser acima do

nível da Classe I durante a operação normal ou a manutenção pelo usuário ou sob as condições de manutenção

prescritas.

Laserinformatie

Deze printer is in de Verenigde Staten gecertificeerd als een product dat voldoet aan de vereisten van DHHS 21 CFR,

hoofdstuk 1, paragraaf J voor laserproducten van klasse I (1). Elders is de printer gecertificeerd als een laserproduct

van klasse I dat voldoet aan de vereisten van IEC 60825-1.

Laserproducten van klasse I worden geacht geen gevaar op te leveren. De printer bevat intern een laser van klasse IIIb

(3b), een galliumarsenide laser met een nominaal vermogen van 7 milliwatt en een golflengtebereik van 655-675

nanometer. Het lasersysteem en de printer zijn zodanig ontworpen dat gebruikers nooit blootstaan aan laserstraling

die hoger is dan het toegestane niveau voor klasse I-apparaten, tijdens normaal gebruik, onderhoudswerkzaamheden

door de gebruiker of voorgeschreven servicewerkzaamheden.

Lasererklæring

Denne printer er certificeret i USA i henhold til kravene i DHHS 21 CFR, afsnit I, underafsnit J, for Klasse I-laserprodukter

(1) og certificeret andetsteds som et Klasse I-laserprodukt i henhold til kravene i IEC 60825-1.

Klasse I-laserprodukter anses ikke for at være farlige. Printeren indeholder internt en klasse IIIb (3b)-laser, der nominelt

er en 7 milliwatt galliumarsenid-laser, som fungerer i bølgelængdeområdet 655-675 nanometer. Lasersystemet og

printeren er udviklet på en sådan måde, at der ikke er en direkte laserstråling, der overskrider Klasse I-niveauet under

normal brug, brugers vedligeholdelse eller de foreskrevne servicebetingelser.

Laserilmoitus

Tämä tulostin on sertifioitu Yhdysvalloissa DHHS 21 CFR, Chapter I, Subchapter J -standardin mukaiseksi luokan I (1) -

lasertuotteeksi ja muualla IEC 60825-1 -standardin mukaiseksi luokan I lasertuotteeksi.

4514

Notices and safety information

12

Luokan I lasertuotteita ei pidetä haitallisina. Tulostimen sisällä on luokan IIIb (3b) laser, joka on nimellisteholtaan 7

mW:n galliumarsenidilaser ja toimii 655–675 nanometrin aallonpituuksilla. Laserjärjestelmä ja tulostin ovat

rakenteeltaan sellaisia, että käyttäjä ei joudu alttiiksi luokkaa 1 suuremmalle säteilylle normaalin käytön, ylläpidon tai

huollon aikana.

Lasermeddelande

Skrivaren är certifierad i USA enligt kraven i DHHS 21 CFR, avsnitt I, underavsnitt J för laserprodukter av klass I (1) och

i andra länder är den certifierad som en laserprodukt av klass I som uppfyller kraven i IEC 60825-1.

Laserprodukter av klass I anses inte vara skadliga. Skrivaren innehåller en klass IIIb (3b)-laser, vilket är en 7 mW

galliumarseniklaser som arbetar inom en våglängd på 655–675 nm. Lasersystemet och skrivaren är utformade så att

människor aldrig utsätts för laserstrålning över klass I-nivå under normala förhållanden vid användning, underhåll eller

service.

Lasermerknad

Skriveren er sertifisert i USA for samsvar med kravene i DHHS 21 CFR, kapittel I, underkapittel J for laserprodukter av

klasse I (1), og er andre steder sertifisert som et laserprodukt av klasse I som samsvarer med kravene i IEC 60825-1.

Laserprodukter av klasse I anses ikke som helseskadelige. Skriveren inneholder en intern laser av klasse IIIb (3b) som

nominelt er en 7 milliwatt galliumarsenid-laser, og som opererer i bølgelengder på 655-675 nanometer. Lasersystemet

og skriveren er utformet slik at mennesker ikke utsettes for laserstråling utover nivået i klasse I under normal drift,

vedlikehold eller foreskrevet service.

Avís sobre el làser

Als EUA, la impressora està certificada de conformitat amb els requisits del capítol I, apartat J del CFR 21 del Departament

de Salut i Serveis Humans per a productes làser de classe I (1) i a la resta de països està certificada com a producte làser

de classe I d'acord amb els requisits de la norma IEC 60825-1.

Els productes làser de classe I no es consideren perillosos. A l'interior de la impressora hi ha un làser de classe IIIb (3b)

que nominalment es un arsenur de galió de 7 mil·liwatts que funciona a una longitud d'ona de 655-675 nanòmetres.

El sistema làser y la impressora s'han dissenyat amb l'objectiu d'impedir l'accés humà de la radiació làser superior al

nivell de classe I durant un funcionament normal, el manteniment per part de l'usuari o les condicions de servei

prescrites.

レーザーに関する通知

本機は、米国においてクラス I（1）レーザー製品に対する DHHS 21 CFR、Chapter I、Subchapter J の要件に準

拠し、その他の国では IEC 60825-1 の要件に準拠するクラス I レーザー製品として認可されています。

クラス I レーザー製品は、危険性がないとみなされています。本機には、クラス IIIb（3b）レーザーが内蔵

されています。これは、655 ～ 675 ナノメートルの波長で動作する定格 7 ミリワットのガリウムヒ素レーザ

ーです。レーザーシステムとプリンタは、通常の操作、ユーザーによるメンテナンス、または所定のサー

ビス条件の下で、ユーザーがクラス I レベルを超えるレーザー放射に絶対にさらされないように設計されて

います。

레이저 관련 공지

이 프린터는 미국에서 DHHS 21 CFR, Chapter I, Subchapter J 의 요구 사항을 준수하는 클래스 I(1) 레이저 제품으

로 승인되었으며 이외 지역에서 IEC 60825-1 의 요구 사항을 준수하는 클래스 I 레이저 제품으로 승인되었습니다.

4514

Notices and safety information

13

Class I 레이저 제품은 위험한 제품으로 간주되지 않습니다. 프린터에는 655-675 나노미터의 파장 영역에서 작동

하는 공칭 7 밀리와트 갈륨 비소 레이저인 클래스 IIIb(3b) 레이저가 내부에 포함되어 있습니다. 레이저 시스템

과 프린터는 정상적인 작동, 사용자 유지 관리 또는 사전 설명된 서비스 조건에는 사람에게 클래스 I 수준 이상

의 레이저 방사가 노출되지 않도록 설계되었습니다.

激光注意事项

本打印机在美国认证合乎 DHHS 21 CFR Chapter I，Subchapter J 对分类 I（1）激光产品的标准，而在其他地区则

被认证是合乎 IEC 60825-1 的分类 I 激光产品。

一般认为分类 I 激光产品不具有危险性。本打印机内部含有分类 IIIb（3b）的激光，在操作过程中会产生额定

7 毫瓦的砷化镓激光，其波长范围在 655-675nm 之间。本激光系统及打印机的设计，在一般操作、使用者维护

或规定内的维修情况下，不会使人体接触分类 I 以上等级的辐射。

雷射聲明

本印表機係經過美國核可，符合 DHHS 21 CFR，Chapter I，Subchapter J 規定的 I (1) 級雷射產品激光注意事项；

在美國以外的地區，為符合 IEC 60825-1 規定的 I 級雷射產品。

根據 I 級雷射產品的規定，這類產品不會對人體造成傷害。本機所採用之 IIIb (3b) 級雷射只會產生 7 百萬分之

一瓦特 (milliwatt)、波長 655 至 675 億分之一米 (nanometer) 的鎵砷放射線 (gallium arsenide laser)。使用者只要

以正確的方法操作及維護保養，並依照先前所述之維修方式進行修護，此印表機與其雷射系統絕不會產生 I 級

以上的放射線，而對人體造成傷害。

Safety information

• The safety of this product is based on testing and approvals of the original design and specific components. The

manufacturer is not responsible for safety in the event of use of unauthorized replacement parts.

• The maintenance information for this product has been prepared for use by a professional service person and is

not intended to be used by others.

• There may be an increased risk of electric shock and personal injury during disassembly and servicing of this product.

Professional service personnel should understand this and take necessary precautions.

CAUTION—POTENTIAL INJURY

The lithium battery in this product is not intended to be replaced. There is a danger of explosion if a lithium

battery is incorrectly replaced. Do not recharge, disassemble, or incinerate a lithium battery. Discard used

lithium batteries according to the manufacturer's instructions and local regulations.

Consignes de sécurité

• La sécurité de ce produit repose sur des tests et des agréations portant sur sa conception d'origine et sur des

composants particuliers. Le fabricant n'assume aucune responsabilité concernant la sécurité en cas d'utilisation de

pièces de rechange non agréées.

• Les consignes d'entretien et de réparation de ce produit s'adressent uniquement à un personnel de maintenance

qualifié.

• Le démontage et l'entretien de ce produit pouvant présenter certains risques électriques, le personnel d'entretien

qualifié devra prendre toutes les précautions nécessaires.

4514

Notices and safety information

14

AVERTISSEMENT—RISQUE DE BLESSURE

La batterie lithium de ce produit n'est pas destinée à être remplacée. Il existe un risque d'explosion si une

batterie lithium est placée de façon incorrecte. Ne rechargez pas, ne démontez pas et n’incinérez pas une

batterie lithium. Mettez les batteries lithium usagées au rebut selon les instructions du fabricant et les

réglementations locales.

Norme di sicurezza

• La sicurezza del prodotto si basa sui test e sull'approvazione del progetto originale e dei componenti specifici. Il

produttore non è responsabile per la sicurezza in caso di sostituzione non autorizzata delle parti.

• Le informazioni riguardanti la manutenzione di questo prodotto sono indirizzate soltanto al personale di assistenza

autorizzato.

• Durante lo smontaggio e la manutenzione di questo prodotto, il rischio di subire scosse elettriche e danni alla

persona è più elevato. Il personale di assistenza autorizzato deve, quindi, adottare le precauzioni necessarie.

ATTENZIONE — PERICOLO DI LESIONI

La batteria al litio presente del prodotto non deve essere sostituita. In caso di sostituzione errata della

batteria al litio, potrebbe verificarsi un'esplosione. Non ricaricare, smontare o bruciare batterie al litio.

Smaltire le batterie al litio usate seguendo le istruzioni del produttore e le norme locali.

Sicherheitshinweise

• Die Sicherheit dieses Produkts basiert auf Tests und Zulassungen des ursprünglichen Modells und bestimmter

Bauteile. Bei Verwendung nicht genehmigter Ersatzteile wird vom Hersteller keine Verantwortung oder Haftung

für die Sicherheit übernommen.

• Die Wartungsinformationen für dieses Produkt sind ausschließlich für die Verwendung durch einen

Wartungsfachmann bestimmt.

• Während des Auseinandernehmens und der Wartung des Geräts besteht ein zusätzliches Risiko eines elektrischen

Schlags und körperlicher Verletzung. Das zuständige Fachpersonal sollte entsprechende Vorsichtsmaßnahmen

treffen.

VORSICHT - VERLETZUNGSGEFAHR

Die Lithiumbatterie in diesem Produkt darf nicht ausgetauscht werden. Wird eine Lithiumbatterie nicht

ordnungsgemäß ausgetauscht, besteht Explosionsgefahr. Lithiumbatterien dürfen auf keinen Fall wieder

aufgeladen, auseinander genommen oder verbrannt werden. Befolgen Sie zum Entsorgen verbrauchter

Lithiumbatterien die Anweisungen des Herstellers und die örtlichen Bestimmungen.

Pautas de Seguridad

• La seguridad de este producto se basa en pruebas y aprobaciones del diseño original y componentes específicos.

El fabricante no es responsable de la seguridad en caso de uso de piezas de repuesto no autorizadas.

• La información sobre el mantenimiento de este producto está dirigida exclusivamente al personal cualificado de

mantenimiento.

• Existe mayor riesgo de descarga eléctrica y de daños personales durante el desmontaje y la reparación de la máquina.

El personal cualificado debe ser consciente de este peligro y tomar las precauciones necesarias.

PRECAUCIÓN: POSIBLES DAÑOS PERSONALES

La batería de litio de este producto no debe reemplazarse. Existe riesgo de explosión si se sustituye

incorrectamente una batería de litio. No recargue, desmonte ni incinere una batería de litio. Deseche las

baterías de litio según las instrucciones del fabricante y las normativas locales.

4514

Notices and safety information

15

Informações de Segurança

• A segurança deste produto baseia-se em testes e aprovações do modelo original e de componentes específicos. O

fabricante não é responsável pela segunrança, no caso de uso de peças de substituição não autorizadas.

• As informações de segurança relativas a este produto destinam-se a profissionais destes serviços e não devem ser

utilizadas por outras pessoas.

• Risco de choques eléctricos e ferimentos graves durante a desmontagem e manutenção deste produto. Os

profissionais destes serviços devem estar avisados deste facto e tomar os cuidados necessários.

ATENÇÃO — RISCO DE FERIMENTO

A bateria de lítio neste produto não deve ser substituída. Existe o risco de explosão se uma bateria de lítio

for substituída incorretamente. Não recarregue, desmonte ou incinere uma bateria de lítio. Descarte as

baterias de lítio usadas de acordo com as instruções do fabricante e regulamentos locais.

Informació de Seguretat

• La seguretat d'aquest producte es basa en l'avaluació i aprovació del disseny original i els components específics.

El fabricant no es fa responsable de les qüestions de seguretat si s'utilitzen peces de recanvi no autoritzades.

• La informació pel manteniment d’aquest producte està orientada exclusivament a professionals i no està destinada

a ningú que no ho sigui.

• El risc de xoc elèctric i de danys personals pot augmentar durant el procés de desmuntatge i de servei d’aquest

producte. El personal professional ha d’estar-ne assabentat i prendre les mesures convenients.

ATENCIÓ

La bateria de liti d'aquest producte no ha estat dissenyada perquè es substitueixi. Hi ha perill d’explosió si

no es substitueix correctament la bateria de liti. No recarregueu, desmunteu o incinereu una bateria de

liti. Desfeu-vos de les bateries de liti usades d’acord amb les instruccions del fabricant i les regulacions

locals.

안전 사항

• 본 제품은 원래 설계및특정 구성에 대한 테스트 결과로 안정 성이 입증된 것입니다. 따라서 무허가 교체부품

을 사용하는 경 우 에는 제조업체에서 안전에 대한 책임을 지지 않습니다.

• 본 제품에 관한 유지 보수 설명 서는 전문 서비스 기술자 용으로 작성된 것이므로, 비 전문가는 사용할 수 없

습니다.

• 본 제품을 해체하거나 정비할 경우, 전 기전 인 충 경 을 받거나 상 처를 입을 위험이 커집니다. 전문 서비스

기술자는 이 사실을 숙지하고, 필요한 예방조치를 취하도록 하십시오.

주의—부상 위험

이 제품에 들어 있는 리튬 배터리는 교체할 수 없습니다. 리튬 배터리를 잘못 교체하면 폭발할 위험

이 있습니다. 리튬 배터리를 재충전하거나, 분해하거나, 태우지 마십시오. 제조업체의 지침과 지역

규정에 따라 다 쓴 리튬 배터리를 폐기하십시오.

安全信息

• 本产品的安全性以原来设计和特定产品的测试结果和认证为基础。万一使用来经许可的替换部件，制造商

不对安全性负责。

• 本产品的维护信息仅供专业服务人员使用，并不打算证其他人使用。

• 本产品在拆卸、维修时，遭受电击或人员受伤的危险性会增高，专业服务人员对这点必须有所了触，并采

取必要的预防措施。

4514

Notices and safety information

16

当心一可能的伤害

：

本产品中的锂电池不可更换。如果不正确更换锂电池，可能会有爆炸危险。不要再充电、拆解或

焚烧锂电池

。

丢弃旧的锂电池时应按照制造商的指导及当地法规进行处理

。

4514

Notices and safety information

17

4514

18

Preface

This manual contains maintenance procedures for service personnel.

It is divided into the following chapters:

• General information contains a general description of the printer. Special tools and test equipment are discussed.

• Diagnostic information contains diagnostic aids you can use to isolate failing FRUs. These diagnostic aids include

error code tables, symptom tables, and service checks.

• Service menus contains descriptions of the printer interface, the user and service menus.

• Repair information provides instructions for making printer adjustments and removing and installing FRUs.

• Component locations uses illustrations to identify the basic printer parts.

• Maintenance contains the lubrication specifications and recommendations to prevent problems.

• Parts catalog contains illustrations and part numbers for individual FRUs.

• Appendix A: Printer specifications contains detailed specifications about the product.

• Appendix B: Options and features contains the available options and other features of the product.

• Appendix C: Theory of operation contains the theory of operation.

• Appendix D: Acronyms contains the list of acronyms in the manual and their meanings.

Service manual conventions

Note: A note provides additional information.

Warning—Potential Damage: A warning identifies something that might damage the product hardware or software.

This service manual uses several different types of caution statements:

CAUTION—POTENTIAL INJURY: A caution identifies something that might cause the service technician harm.

CAUTION—SHOCK HAZARD: This type of caution indicates a danger from hazardous voltage in the area of the

product where you are working. Unplug the product before you start working, or use caution if the product

must receive power to perform the task.

CAUTION—HOT SURFACE: This type of caution indicates a hot surface.

CAUTION—TIPPING HAZARD: This type of caution indicates a tipping hazard.

4514

Preface

19

4514

20

La pagina sta caricando ...

Lexmark MS315 Manuale utente

Questo manuale è adatto anche per

Lexmark MS315 Manuale utente

in altre lingue

Documenti correlati

Altri documenti