Lexmark MX410 Series Manuale utente

Categoria
Stampanti laser / LED
Tipo
Manuale utente

Questo manuale è adatto anche per

MX310, MX317, MX410, MX417,
MX510, MX511, MX517de, XM1135,
XM1140, and XM1145 MFPs
Machine Type 7015-270, -47x, -6xx
Service Manual
Start diagnostics
Maintenance
Safety and notices
Trademarks
Index
October 03, 2018 www.lexmark.com
P/N 12G2376
Product information
Product name:
LexmarkMX310, MX317, MX410, MX417, MX510, MX511, MX517de, XM1135, XM1140, and XM1145 MFPs
Machine type:
7015
Model(s):
270, 279, 470, 479, 630, 670, 675, 679
Edition notice
October 03, 2018
The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK
INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement
may not apply to you.
This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information
herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described
may be made at any time.
References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available
in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that
product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any
existing intellectual property right may be used instead. Evaluation and verification of operation in conjunction with other products,
programs, or services, except those expressly designated by the manufacturer, are the user’s responsibility.
Trademarks
Lexmark and the Lexmark logo are trademarks of Lexmark International, Inc., registered in the United States and/or other countries.
PCL® is a registered trademark of the Hewlett-Packard Company. PCL is Hewlett-Packard Company’s designation of a set of printer
commands (language) and functions included in its printer products. This printer is intended to be compatible with the PCL language.
This means the printer recognizes PCL commands used in various application programs, and that the printer emulates the functions
corresponding to the commands.
PostScript is a registered trademark of Adobe Systems Incorporated in the United States and/or other countries.
All other trademarks are the property of their respective owners.
© 2017 Lexmark International, Inc.
All rights reserved.
P/N 12G2376
7015
Table of contents
Product information......................................................................................2
Edition notice.................................................................................................2
Notices, conventions, and safety information.........................................15
Laser notice......................................................................................................................................................... 15
Conventions.........................................................................................................................................................18
Safety information.............................................................................................................................................. 18
General caution statements........................................................................................................................... 24
Change history............................................................................................25
Change history...................................................................................................................................................25
General information................................................................................... 33
Media guidelines............................................................................................................................................... 33
Paper guidelines.......................................................................................................................................................... 33
Using recycled paper and other oce papers.................................................................................................... 36
Using specialty media................................................................................................................................................ 36
Supported paper sizes, types, and weights......................................................................................................... 38
Data security notice........................................................................................................................................... 41
Tools required for service.................................................................................................................................41
Diagnostics and troubleshooting............................................................. 43
Troubleshooting overview...............................................................................................................................43
Performing the initial troubleshooting check....................................................................................................... 43
Poweron Reset (POR) sequence............................................................................................................................ 44
Using Safe Mode ......................................................................................................................................................... 44
Fixing print quality issues................................................................................................................................45
Initial print quality check............................................................................................................................................ 46
Gray background or toner fog check..................................................................................................................... 46
Blank pages check...................................................................................................................................................... 49
Print is too dark check................................................................................................................................................55
Print is too light check................................................................................................................................................ 57
Paper curl check..........................................................................................................................................................59
Folded or wrinkled paper check .............................................................................................................................. 61
Solid black pages check............................................................................................................................................62
Repeating defects check...........................................................................................................................................65
Skewed print check ....................................................................................................................................................66
7015
Table of contents
3
Streaked vertical lines appear on prints check...................................................................................................68
Horizontal light bands check....................................................................................................................................69
Vertical light bands check...........................................................................................................................................71
Vertical dark bands check......................................................................................................................................... 72
Vertical dark streaks with print missing check .....................................................................................................73
White streaks and voided areas check ................................................................................................................. 75
Fine lines are not printed correctly (specifically Chinese characters) check .............................................. 78
Clipped pages or images check.............................................................................................................................. 79
Compressed images appear on prints check....................................................................................................... 81
Incorrect margins on prints check .......................................................................................................................... 82
Toner rubs o check................................................................................................................................................... 83
Toner specks appear on prints check.................................................................................................................... 84
Paper jams...........................................................................................................................................................86
Avoiding jams...............................................................................................................................................................86
Understanding jam messages and locations....................................................................................................... 87
[x]page jam, open front door. [20y.xx] .................................................................................................................. 88
[x]page jam, clear standard bin. [20y.xx]............................................................................................................... 91
[x]page jam, open rear door. [20y.xx]..................................................................................................................... 91
[x]page jam, remove tray 1 to clear duplex. [23y.xx] ......................................................................................... 93
[x]page jam, open tray [x]. [24y.xx]......................................................................................................................... 94
[x]page jam, open tray [x]. [24y.xx]......................................................................................................................... 95
[x]page jam, clear manual feeder. [25y.xx] ..........................................................................................................96
[x]page jam, open automatic feeder top cover. [28y.xx].................................................................................. 97
200 paper jams............................................................................................................................................................ 98
201 paper jams............................................................................................................................................................103
202 paper jams...........................................................................................................................................................104
23y paper jams ...........................................................................................................................................................106
241 paper jams............................................................................................................................................................107
242–244 paper jams..................................................................................................................................................112
25y paper jams ............................................................................................................................................................119
28y paper jams ...........................................................................................................................................................120
29y paper jams ...........................................................................................................................................................123
Understanding printer messages................................................................................................................125
Cartridge low [88.xy]..................................................................................................................................................125
Cartridge nearly low [88.xy].....................................................................................................................................125
Cartridge very low, [x] estimated pages remain [88.xy] ...................................................................................125
Change [paper source] to [custom string] load [paper orientation] ..............................................................125
Change [paper source] to [custom type name] load [orientation].................................................................126
Change [paper source] to [paper size] load [orientation] ................................................................................126
Change [paper source] to [paper type] [paper size] load [orientation].........................................................126
Close flatbed cover and load originals if restarting job [2yy.xx] ....................................................................126
Close door....................................................................................................................................................................126
Configuration change, some held jobs were not restored [57] .....................................................................127
Complex page, some data may not have printed [39] .....................................................................................127
7015
Table of contents
4
Defective flash detected [51]...................................................................................................................................127
Disk must be formatted for use in this device....................................................................................................127
Error reading USB drive. Remove USB.................................................................................................................127
Error reading USB hub. Remove hub....................................................................................................................127
Fax partition inoperative. Contact system administrator..................................................................................128
Fax server 'To Format' not set up. Contact system administrator..................................................................128
Fax Station Name not set up. Contact system administrator..........................................................................128
Fax Station Number not set up. Contact system administrator......................................................................128
Imaging unit low [84.xy] ............................................................................................................................................128
Imaging unit nearly low [84.xy] ...............................................................................................................................128
Imaging unit very low, [x] estimated pages remain [84.xy]..............................................................................129
Incorrect paper size, open [paper source] [34]...................................................................................................129
Insucient memory, some Held Jobs were deleted [37].................................................................................129
Insucient memory, some held jobs will not be restored [37].......................................................................129
Insucient memory for Flash Memory Defragment operation [37] ..............................................................129
Insucient memory to collate job [37]..................................................................................................................130
Insucient memory to support Resource Save feature [35]...........................................................................130
Load manual feeder with [custom string] [paper orientation].........................................................................130
Load manual feeder with [custom type name] [paper orientation] ...............................................................130
Load manual feeder with [paper size] [paper orientation]...............................................................................130
Load manual feeder with [paper type] [paper size] [paper orientation]........................................................131
Load [paper source] with [custom string] [paper orientation] ..........................................................................131
Load [paper source] with [custom type name] [paper orientation].................................................................131
Load [paper source] with [paper size] [paper orientation]...............................................................................132
Load [paper source] with [paper type] [paper size] [paper orientation] .......................................................132
Maintenance kit low [80.xy] .....................................................................................................................................132
Maintenance kit nearly low [80.xy] ........................................................................................................................132
Maintenance kit very low, [x] estimated pages remain [80.xy].......................................................................132
Memory full [38] ..........................................................................................................................................................133
Memory full, cannot print faxes...............................................................................................................................133
Memory full, cannot send faxes..............................................................................................................................133
Network [x] software error [54] ...............................................................................................................................133
No analog phone line connected to modem, fax is disabled.........................................................................133
NonLexmark [supply type], see User’s Guide [33.xy] ......................................................................................133
Not enough free space in flash memory for resources [52] ...........................................................................134
Printer had to restart. Last job may be incomplete. ..........................................................................................134
Reinstall defective or unresponsive cartridge [31.xy]........................................................................................134
Reinstall missing or unresponsive cartridge [31.xy]...........................................................................................135
Remove paper from standard output bin.............................................................................................................135
Replace all originals if restarting job. ....................................................................................................................135
Replace cartridge, 0 estimated pages remain [88.xy]......................................................................................135
Replace cartridge, printer region mismatch [42.xy]...........................................................................................135
Replace defective imaging unit [31.xy]..................................................................................................................136
Replace jammed originals if restarting job. .........................................................................................................136
Replace imaging unit, 0 estimated pages remain [84.xy]................................................................................136
7015
Table of contents
5
Replace maintenance kit, 0 estimated pages remain [80.xy].........................................................................137
Reinstall missing or unresponsive imaging unit [31.xy]..................................................................................... 137
Replace unsupported cartridge [32.xy] ................................................................................................................137
Replace unsupported imaging unit [32.xy].......................................................................................................... 137
Restore held jobs?......................................................................................................................................................137
Scanner automatic feeder cover open.................................................................................................................137
Scanner disabled by admin [840.01] .....................................................................................................................138
Scanner disabled. Contact system administrator if problem persists. [840.02] ........................................138
Scanner jam, remove all originals from the scanner [2yy.xx]..........................................................................138
Scanner jam, remove jammed originals from the scanner [2yy.xx]...............................................................138
Serial option [x] error [54].........................................................................................................................................138
SMTP server not set up. Contact system administrator. ..................................................................................138
Some held jobs were not restored........................................................................................................................138
Standard network software error [54]...................................................................................................................139
Standard USB port disabled [56]............................................................................................................................139
Supply needed to complete job.............................................................................................................................139
Too many flash options installed [58]....................................................................................................................139
Too many trays attached [58]..................................................................................................................................139
Unformatted flash detected [53] ............................................................................................................................140
Weblink server not set up. Contact system administrator. ..............................................................................140
User attendance messages.......................................................................................................................... 140
User attendance messages (0–99.99) .................................................................................................................140
Unresponsive toner cartridge service check......................................................................................................143
Unsupported toner cartridge service check .......................................................................................................143
Printer/cartridge mismatch service check ...........................................................................................................144
Unsupported imaging unit service check ............................................................................................................144
Imaging unit smart chip contact service check ..................................................................................................145
Toner smart chip compatibility service check.....................................................................................................145
Imaging chip compatibility service check............................................................................................................146
Media size mismatch service check......................................................................................................................146
Supplies mismatch service check..........................................................................................................................147
Flash full service check.............................................................................................................................................148
Maintenance kit service check ...............................................................................................................................148
Insucient memory service check ........................................................................................................................148
Imaging unit low service check ..............................................................................................................................149
Toner cartridge low service check.........................................................................................................................149
Printer hardware errors..................................................................................................................................150
111 errors........................................................................................................................................................................150
121 errors.......................................................................................................................................................................154
126 errors......................................................................................................................................................................156
132 errors......................................................................................................................................................................157
133 errors......................................................................................................................................................................158
140 errors......................................................................................................................................................................159
146 errors......................................................................................................................................................................160
7015
Table of contents
6
155 errors......................................................................................................................................................................160
171 errors .......................................................................................................................................................................162
Procedure before starting the 9yy service checks ...........................................................................................163
900 errors ....................................................................................................................................................................165
912 errors......................................................................................................................................................................170
94y errors .....................................................................................................................................................................170
950–958 errors ..........................................................................................................................................................170
959 errors.....................................................................................................................................................................173
96y errors.....................................................................................................................................................................174
97y errors .....................................................................................................................................................................175
98y errors .....................................................................................................................................................................176
99y errors..................................................................................................................................................................... 177
ADF/Scanner hardware errors......................................................................................................................178
8yy error messages ...................................................................................................................................................178
Scanner disabled error service check ..................................................................................................................179
Scanner carriage failure service check ................................................................................................................180
ADF service check ......................................................................................................................................................181
Scanner configuration error service check .........................................................................................................182
Scan/fax/copy symptoms .........................................................................................................................................182
Black or blank page copy service check .............................................................................................................183
CCD service check.....................................................................................................................................................184
Flatbed motor service check...................................................................................................................................184
Flatbed home position service check...................................................................................................................185
ADF rattling noise service check ...........................................................................................................................186
Flatbed legal scan service check...........................................................................................................................186
ADF streak service check ........................................................................................................................................187
ADF feed errors service check...............................................................................................................................187
ADF duplex failure service check ..........................................................................................................................188
Modem/fax card service check...............................................................................................................................189
Blank spaces on incoming fax service check.....................................................................................................190
Stretched words on incoming fax service check...............................................................................................190
Fax reception service check ....................................................................................................................................191
Fax transmission service check..............................................................................................................................192
Fax error log codes....................................................................................................................................................195
Escalating a fax issue to secondlevel support ..................................................................................................198
Input option hardware errors.......................................................................................................................200
321–344 errors.......................................................................................................................................................... 200
Other symptoms..............................................................................................................................................204
Base printer symptoms............................................................................................................................................204
Dead machine service check................................................................................................................................ 205
Controller board service check ............................................................................................................................ 206
Control panel service check...................................................................................................................................207
Control panel button service check .................................................................................................................... 208
USB print service check ......................................................................................................................................... 209
7015
Table of contents
7
Front door not closed service check ....................................................................................................................210
Network service check ..............................................................................................................................................211
Service menus........................................................................................... 215
Understanding the control panel and menus.......................................................................................... 215
Using the printer control panel...............................................................................................................................215
Understanding the colors of the Sleep button and indicator lights..............................................................216
Understanding the home screen ...........................................................................................................................217
Using the touch-screen buttons .............................................................................................................................218
Menus list...........................................................................................................................................................219
Diagnostics menu...........................................................................................................................................220
Entering the Diagnostics menu ............................................................................................................................ 220
Registration ................................................................................................................................................................ 220
Scanner calibration ....................................................................................................................................................221
PRINT TESTS ..............................................................................................................................................................222
Print Quality Pages....................................................................................................................................................222
HARDWARE TESTS...................................................................................................................................................223
DUPLEX TESTS..........................................................................................................................................................225
INPUT TRAY TESTS..................................................................................................................................................227
OUTPUT BIN TESTS .................................................................................................................................................228
BASE SENSOR TEST ................................................................................................................................................229
DEVICE TESTS ...........................................................................................................................................................229
PRINTER SETUP.........................................................................................................................................................230
EP SETUP ....................................................................................................................................................................232
REPORTS.....................................................................................................................................................................234
EVENT LOG.................................................................................................................................................................234
Scanner tests..............................................................................................................................................................235
Exit Diags.....................................................................................................................................................................239
Configuration menu....................................................................................................................................... 240
Entering the Configuration menu..........................................................................................................................240
Reset ADF Maintenance Kit Counter ...................................................................................................................240
Maintenance Counter Value...................................................................................................................................240
Reset Maintenance Counter...................................................................................................................................240
Print Quality Pages.....................................................................................................................................................241
Reports..........................................................................................................................................................................241
Panel Menus ................................................................................................................................................................241
PPDS Emulation.........................................................................................................................................................242
Download Emuls........................................................................................................................................................242
Safe Mode ...................................................................................................................................................................242
Factory Defaults.........................................................................................................................................................242
Energy Conserve.......................................................................................................................................................243
Fax low power support ............................................................................................................................................243
Min copy memory......................................................................................................................................................243
Num pad job assist....................................................................................................................................................243
7015
Table of contents
8
Format fax storage....................................................................................................................................................244
ADF edge erase.........................................................................................................................................................244
Flatbed edge erase...................................................................................................................................................244
Scanner manual registration ..................................................................................................................................244
Disable scanner .........................................................................................................................................................246
Paper Prompts............................................................................................................................................................246
Envelope Prompts.....................................................................................................................................................246
Action for Prompts ....................................................................................................................................................247
Jobs on Disk ...............................................................................................................................................................247
Disk Encryption..........................................................................................................................................................248
Wipe All Settings .......................................................................................................................................................248
Font Density................................................................................................................................................................248
Font Sharpening ........................................................................................................................................................248
Reduced Curl..............................................................................................................................................................248
Require Standby ........................................................................................................................................................249
A5 Loading..................................................................................................................................................................249
UI Automation.............................................................................................................................................................249
LES Applications....................................................................................................................................................... 250
Key Repeat Initial Delay.......................................................................................................................................... 250
Key Repeat Rate ....................................................................................................................................................... 250
Clear Supply Usage History................................................................................................................................... 250
Clear Custom Status..................................................................................................................................................251
USB Speed...................................................................................................................................................................251
Automatically Display Error Screens.....................................................................................................................251
USB PnP........................................................................................................................................................................251
Restore factory defaults...........................................................................................................................................252
Entering Invalid engine mode..................................................................................................................... 252
Entering Recovery mode.............................................................................................................................. 253
Accessing the Network SE menu...............................................................................................................253
Service Engineer menu.................................................................................................................................253
Accessing the service engineer (SE) menu........................................................................................................253
Service engineer (SE) menu ...................................................................................................................................253
Fax service engineer (SE) menu............................................................................................................................254
Parts removal............................................................................................255
Removal precautions..................................................................................................................................... 255
Data security notice..................................................................................................................................................255
Handling ESDsensitive parts.................................................................................................................................255
Controller board/control panel replacement .....................................................................................................256
Restoring the printer configuration after replacing the controller board ...................................................257
Restoring solutions, licenses, and configuration settings ..............................................................................259
Updating the printer firmware .............................................................................................................................. 260
Backing up eSF solutions and settings ................................................................................................................261
7015
Table of contents
9
Ribbon cable connectors ........................................................................................................................................262
Zero Insertion Force (ZIF) connectors.............................................................................................................262
Horizontal top contact connector ....................................................................................................................263
Horizontal bottom contact connector.............................................................................................................266
Vertical mount contact connector....................................................................................................................269
Horizontal sliding contact connector ..............................................................................................................272
Low Insertion Force (LIF) connector................................................................................................................275
Printhead assembly adjustments ..........................................................................................................................276
Removal procedures......................................................................................................................................279
Left side removals...........................................................................................................................................279
Left cover removal ....................................................................................................................................................279
Main drive gearbox removal....................................................................................................................................281
MPF solenoid removal .............................................................................................................................................283
MPF gearbox removal ..............................................................................................................................................285
Reverse solenoid removal ......................................................................................................................................288
ACM clutch removal (MX310, MX410) ..................................................................................................................289
Cartridge gearbox removal......................................................................................................................................291
Duplex gear assembly removal .............................................................................................................................292
Right side removals........................................................................................................................................294
Right cover removal..................................................................................................................................................294
Memory access door removal................................................................................................................................297
Tray present sensor removal..................................................................................................................................297
Cooling fan removal..................................................................................................................................................298
Controller board removal........................................................................................................................................299
Controller board shield removal.............................................................................................................................301
Upper shield removal...............................................................................................................................................303
Toner cartridge smart chip contact removal ......................................................................................................303
Modem removal.........................................................................................................................................................305
Front removals.................................................................................................................................................307
Left front mount removal.........................................................................................................................................307
Right front mount removal ......................................................................................................................................307
Transfer roll removal.................................................................................................................................................309
Cartridge plunger removal.......................................................................................................................................310
Name plate cover removal.......................................................................................................................................312
Front bin cover removal............................................................................................................................................314
Control panel assembly removal............................................................................................................................315
UICC removal ..............................................................................................................................................................318
UICC (MX310) removal ..............................................................................................................................................318
UICC shield removal..................................................................................................................................................319
USB cable bracket removal....................................................................................................................................320
Speaker removal .......................................................................................................................................................320
Control panel cover removal...................................................................................................................................321
Display removal (MX410, MX51x)...........................................................................................................................322
Display (MX310) removal ........................................................................................................................................324
7015
Table of contents
10
Light tube removal ....................................................................................................................................................324
Keypad assembly removal......................................................................................................................................326
MPF tray removal.......................................................................................................................................................326
MPF pick roller cover removal ...............................................................................................................................329
MPF pick roller removal...........................................................................................................................................329
Bail removal ................................................................................................................................................................330
Jam access cover removal ......................................................................................................................................331
Front access cover removal ...................................................................................................................................332
Front door sensor removal .....................................................................................................................................334
Front input guide removal.......................................................................................................................................334
Separator pad removal ............................................................................................................................................336
Bottom removals.............................................................................................................................................339
Power supply removal..............................................................................................................................................339
Power supply shield removal .................................................................................................................................340
Duplex removal...........................................................................................................................................................341
Duplex sensor and input sensor removal...........................................................................................................342
Duplex sensor and input sensor (MX310, MX410) removal............................................................................345
Index sensor removal...............................................................................................................................................346
Media present sensor removal.............................................................................................................................. 347
Toner density sensor removal................................................................................................................................349
Trailing edge sensor removal.................................................................................................................................350
Trailing edge sensor (MX310, MX410) removal...................................................................................................351
Media present sensor flag removal......................................................................................................................355
ACM assembly removal...........................................................................................................................................359
ACM assembly (MX310, MX410) removal.............................................................................................................361
Pick/lift motor gearbox removal.............................................................................................................................365
Tray guide removal ...................................................................................................................................................366
Rear side removals.........................................................................................................................................368
Dust cover removal...................................................................................................................................................368
Rear exit door removal.............................................................................................................................................369
Rear cover removal...................................................................................................................................................370
Bin full sensor removal.............................................................................................................................................370
Redrive assembly removal......................................................................................................................................372
Redrive shaft removal............................................................................................................................................... 373
Fuser removal.............................................................................................................................................................375
Top side removals........................................................................................................................................... 377
Top cover assembly removal.................................................................................................................................. 377
Bin extender removal...............................................................................................................................................378
Laser scanning unit (LSU) removal .......................................................................................................................379
ADF/scanner removals.................................................................................................................................. 382
ADF separator pad removal ..................................................................................................................................382
ADF separator roll removal ....................................................................................................................................384
Flatbed cushion removal ........................................................................................................................................385
Scanner front cover removal..................................................................................................................................386
7015
Table of contents
11
Scanner rear cover removal ...................................................................................................................................387
ADF input tray removal ............................................................................................................................................387
ADF unit removal.......................................................................................................................................................388
Scanner assembly removal.....................................................................................................................................390
ADF top cover assembly removal.........................................................................................................................393
ADF cable removal....................................................................................................................................................395
USB cable removal....................................................................................................................................................395
USB wireless cable removal...................................................................................................................................396
ADF hinge removal ...................................................................................................................................................398
Flatbed assembly removal......................................................................................................................................398
Control panel ribbon cable removal.....................................................................................................................398
Speaker cable removal............................................................................................................................................399
Cave light cable removal..........................................................................................................................................401
Restraint pad removal ..............................................................................................................................................402
250/550-sheet option tray removals.........................................................................................................403
Pick roller removal.....................................................................................................................................................403
Separator roll assembly removal...........................................................................................................................404
ACM assembly removal...........................................................................................................................................406
Component locations.............................................................................. 409
Exterior locations............................................................................................................................................ 409
Front view....................................................................................................................................................................409
Rear view ......................................................................................................................................................................410
Connectors......................................................................................................................................................... 411
Controller board...........................................................................................................................................................411
Power supply...............................................................................................................................................................417
Maintenance..............................................................................................419
Inspection guide...............................................................................................................................................419
Scheduled maintenance...............................................................................................................................420
Maintenance kits........................................................................................................................................................420
Resetting the maintenance counter .....................................................................................................................420
Lubrication specification................................................................................................................................ 421
Cleaning the printer.........................................................................................................................................421
Cleaning the printer...................................................................................................................................................421
Cleaning the scanner glass ....................................................................................................................................422
Cleaning the printhead lenses...............................................................................................................................423
Parts catalog............................................................................................. 424
Legend...............................................................................................................................................................424
Assembly 1: Covers.........................................................................................................................................425
Assembly 2: Imaging......................................................................................................................................427
7015
Table of contents
12
Assembly 3: Control panel (MX41x, MX51x, XM1140, and XM1145)..................................................... 431
Assembly 4: Control panel (MX31x)............................................................................................................433
Assembly 5: Electronics 1 (MX31x, MX41x, and XM1140).......................................................................435
Assembly 6: Electronics 1 (MX51x and XM1145)......................................................................................439
Assembly 7: Electronics 2 (MX31x, MX41x, and XM1140)......................................................................443
Assembly 8: Electronics 2 (MX51x and XM1145).....................................................................................445
Assembly 9: Frame (MX31x, MX41x, and XM1140).................................................................................. 447
Assembly 10: Frame (MX51x and XM1145)................................................................................................452
Assembly 11: Option trays............................................................................................................................. 455
Assembly 12: Maintenance kits....................................................................................................................457
Assembly 13: Power cords............................................................................................................................459
Assembly 14: Miscellaneous..........................................................................................................................461
Printer specifications............................................................................... 463
Electrical specifications.................................................................................................................................463
Operating clearances.................................................................................................................................... 463
Acoustics...........................................................................................................................................................463
Operating environment.................................................................................................................................464
Scanner specifications.................................................................................................................................. 465
Fax specifications........................................................................................................................................... 466
Enabling the security reset jumper............................................................................................................ 466
Options and features............................................................................... 469
Available internal options............................................................................................................................. 469
Media handling options.................................................................................................................................469
Theory of operation.................................................................................. 471
POR sequence..................................................................................................................................................471
Printer control....................................................................................................................................................471
Paper path information................................................................................................................................... 471
Input tray.......................................................................................................................................................................471
Multipurpose feeder (MPF) .....................................................................................................................................472
Simplex printing.........................................................................................................................................................472
Duplex printing...........................................................................................................................................................473
Media handling components........................................................................................................................474
Main drive gearbox ...................................................................................................................................................474
Autocompensator mechanism (ACM) .................................................................................................................. 474
Key components..............................................................................................................................................475
7015
Table of contents
13
Sensors ........................................................................................................................................................................475
Other key components ............................................................................................................................................476
Electrophotographic process (EP process).............................................................................................. 478
ADF theory.........................................................................................................................................................481
ADF theory of operation...........................................................................................................................................481
Acronyms...................................................................................................485
Acronyms.......................................................................................................................................................... 485
Index...........................................................................................................487
Part number index....................................................................................497
Part name index....................................................................................... 503
7015
Table of contents
14
Notices, conventions, and safety information
Laser notice
The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, Chapter I, Subchapter J for
Class I (1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements
of IEC 60825-1: 2014.
Class I laser products are not considered to be hazardous. The printer contains a Class IIIb (3b) laser that is
nominally a 12milliwatt gallium arsenide laser operating in the wavelength of 655–675 nanometers. The laser
system and printer are designed so there is never any human access to laser radiation above a Class I level
during normal operation, user maintenance, or prescribed service condition.
Avis relatif à l'utilisation du laser
Cette imprimante est
certifiée
conforme aux exigences de la réglementation des Etats-Unis relative aux produits
laser de classe I (1) (DHHS 21 CFR, Chapitre I, Sous-chapitre J). Pour les autres pays, elle est certiée conforme
aux exigences des normes CEI 60825-1:2014 relatives aux produits laser de classe I.
Les produits laser de classe I ne sont pas considérés comme dangereux. L'imprimante contient un laser de
classe IIIb (3b), laser arséniure de gallium 12 milliwatts opérant sur une longueur d'onde de l'ordre de 655 à
675 nanomètres. Le système laser ainsi que l'imprimante ont été conçus de manière à ce que personne ne soit
exposé à des rayonnements laser dépassant le niveau de classe I dans le cadre d'un fonctionnement normal,
de l'entretien par l'utilisateur ou de la maintenance.
Notificació del làser
La impressora està
certificada
als EUA per complir els requeriments de DHHS 21 CFR, capítol I, subcapítol J
per a productes de làser Classe I (1), i a la resta del món s’ha
certificat
com productes de làser Classe I segons
els requeriments de la norma IEC 60825-1: 2014.
Els productes de làser Classe I no es consideren perillosos. La impressora conté un làser intern Classe IIIb (3b)
que normalment és un arsenur de galió de 12 miliwatts, que funciona a la regió de longitud d’ona de 655 a 675
nanòmetres i es troba dins d’una unitat de capçals d’impressió no substituïbles. El sistema làser i la impressora
estan dissenyats de manera que les persones no estiguin exposades a una radiació del làser superior al nivell
de Classe I durant el funcionament normal, el manteniment de l’usuari o les condicions de servei prescrites.
Aviso de láser
Esta impresora se ha certificado en EE.UU. cumpliendo con los requisitos de DHHS 21 CFR, capítulo I,
subcapítulo J para los productos láser de Clase I (1) y en otros países está
certificada
como un producto láser
de Clase I de acuerdo con los requisitos de IEC 60825-1: 2014.
Los productos láser de Clase I no se consideran peligrosos. La impresora contiene un láser interno de Clase
IIIb (3b) que nominalmente es un láser de arsenide galio de 12 milivatios que funciona en una longitud de onda
de 655-675 nanómetros. El sistema láser y la impresora se han diseñado para que el ser humano no acceda
nunca a las radiaciones láser por encima del nivel de Clase I durante su uso normal, ni en tareas de
mantenimiento o intervenciones de servicio técnico prescritas.
7015
Notices, conventions, and safety information
15
Aviso sobre laser
Esta impressora foi certificada nos EUA por estar em conformidade com os requisitos do DHHS 21 CFR capítulo
I, subcapítulo J, para produtos a laser de Classe I (1) e, nos demais países, foi certificada como um produto a
laser de Classe I em conformidade com os requisitos da IEC 60825-1. 2014.
Os produtos a laser de Classe I não são considerados prejudiciais. A impressora contém, internamente, um
laser de Classe IIIb (3b) que é, nominalmente, um laser de arsenieto de gálio de 12 miliwatts operando no
comprimento de onda de 655-675 nanômetros. O sistema do laser e a impressora foram projetados para que
jamais haja acesso humano à radiação do laser acima do nível da Classe I durante a operação normal ou a
manutenção pelo usuário ou sob as condições de manutenção prescritas.
Avvertenze sui prodotti laser
La stampante è certificata negli Stati Uniti come prodotto conforme ai requisiti DHHS 21 CFR Capitolo I,
Sottocapitolo J per i prodotti laser di Classe I (1), mentre in altri paesi è certificata come prodotto laser di Classe
I conforme ai requisiti IEC 60825-1: 2014.
I prodotti laser di Classe I non sono considerati pericolosi. La stampante contiene un laser di Classe IIIb (3b),
che è nominalmente un laser ad arseniuro di gallio a 12 milliwatt funzionante a una lunghezza d'onda di 655-675
nanometri. Il sistema laser e la stampante sono stati progettati in modo da impedire l'esposizione a radiazioni
laser superiori al livello previsto dalla Classe I durante le normali operazioni di stampa, manutenzione o
assistenza.
Laserinformatie
De printer is in de Verenigde Staten gecertificeerd als een product dat voldoet aan de vereisten van DHHS 21
CFR hoofdstuk 1, paragraaf J voor laserproducten van klasse I (1). Elders is de printer gecertificeerd als een
laserproduct van klasse I dat voldoet aan de vereisten van IEC 60825-1: 2014.
Laserproducten van klasse I worden geacht geen gevaar op te leveren. De printer bevat een interne laser van
klasse IIIb (3b); een galliumarsenide laser met een nominaal vermogen van 12 milliwatt en een golflengtebereik
van 655-675 nanometer. Het lasersysteem en de printer zijn zodanig ontworpen dat gebruikers nooit blootstaan
aan laserstraling die hoger is dan het toegestane niveau voor klasse I-apparaten, tijdens normaal gebruik,
onderhoudswerkzaamheden door de gebruiker of voorgeschreven servicewerkzaamheden.
Lasererklæring
Printeren er certificeret i USA i henhold til kravene i DHHS 21 CFR kapitel I, underafsnit J for klasse l (1)-
laserprodukter og er andre steder certificeret som et klasse I laserprodukt i henhold til kravene i IEC 60825-1:
2014.
Klasse I-laserprodukter anses ikke som farlige. Printeren indeholder internt en klasse IIIb (3b)-laser, der nominelt
er en 12 milliwatt galliumarsenid-laser, som fungerer i bølgelængdeområdet 655-675 nanometer. Lasersystemet
og printeren er udviklet på en sådan måde, at der ikke er en direkte laserstråling, der overskrider Klasse I-
niveauet under normal brug, brugers vedligeholdelse eller de foreskrevne servicebetingelser.
Laser-Hinweis
Der Drucker wurde in den USA zertifiziert und entspricht den Anforderungen der Vorschriften DHHS 21 CFR
Kapitel I für Laserprodukte der Klasse I (1), andernorts ist er als Laserprodukt der Klasse I
zertifiziert,
das den
Anforderungen von IEC 60825-1 entspricht: 2014.
7015
Notices, conventions, and safety information
16
Laserprodukte der Klasse I werden nicht als gefährlich betrachtet. Der Drucker enthält im Inneren einen Laser
der Klasse IIIb (3b), und zwar einen 12-Milliwatt-Gallium-Arsenid-Laser, der im Wellenlängenbereich von 655 bis
675 Nanometern arbeitet. Das Lasersystem und der Drucker sind so konstruiert, dass unter normalen
Betriebsbedingungen, bei der Wartung durch den Benutzer oder bei den vorgeschriebenen
Wartungsbedingungen Menschen keiner Laserstrahlung ausgesetzt sind, die die Werte für Klasse I
überschreitet.
Laserilmoitus
Tämä tulostin on sertifioitu Yhdysvalloissa DHHS 21 CFR Chapter I, Subchapter J -standardin mukaiseksi luokan
I (1) -lasertuotteeksi ja muualla IEC 60825-1:2014 -standardin mukaiseksi luokan I lasertuotteeksi.
Luokan I lasertuotteita ei pidetä haitallisina. Tulostimen sisällä on luokan IIIb (3b) laser, joka on nimellisteholtaan
12 mW:n galliumarsenidilaser ja toimii 655–675 nanometrin aallonpituuksilla. Laserjärjestelmä ja tulostin ovat
rakenteeltaan sellaisia, että käyttäjä ei joudu alttiiksi luokkaa 1 suuremmalle säteilylle normaalin käytön,
ylläpidon tai huollon aikana.
Lasermerknad
Skriveren er sertifisert i USA for samsvar med kravene i DHHS 21 CFR kapittel I, underkapittel J for
laserprodukter av klasse I (1) og er andre steder
sertifisert
som et laserprodukt av klasse I som samsvarer med
kravene i IEC 60825-1: 2014.
Laserprodukter av klasse I anses ikke som helseskadelige. Skriveren inneholder en intern laser av klasse IIIb
(3b) som nominelt er en 12 milliwatt galliumarsenid-laser som opererer i bølgelengder på 655–675 nanometer.
Lasersystemet og skriveren er utformet slik at mennesker ikke utsettes for laserstråling utover nivået i klasse
I under normal drift, vedlikehold eller foreskrevet service.
Meddelande om laser
Skrivaren är
certifierad
i USA i enlighet med kraven i DHHS 21 CFR kapitel I, underkapitel J för klass I (1)-
laserprodukter, och på andra platser
certifierad
som en klass I-laserprodukt i enlighet med kraven i IEC 60825-1.
2014.
Laserprodukter av klass I anses inte vara skadliga. Skrivaren innehåller en klass IIIb (3b)-laser, vilket är en 12
mW galliumarseniklaser som arbetar inom en våglängd på 655–675 nm. Lasersystemet och skrivaren är
utformade så att människor aldrig utsätts för laserstrålning över klass I-nivå under normala förhållanden vid
användning, underhåll eller service.
レーザーについて
本機は、米国においてクラス I1)レーザー製品に対する DHHS 21 CFR Chapter ISubchapter J の要件
準拠し、その他の国では IEC 60825-1: 2014 の要件に準拠するクラス I レーザー製品として認可されています。
クラス I レーザー製品は、危険性がないとみなされています。本機には、クラス IIIb3b)レーザーが内蔵
されています。これは、655 675 ナノメートルの波長で動作する定格 12 ミリワットのガリウムヒ素レー
ザーです。レーザーシステムとプリンタは、通常の操作、ユーザによるメンテナンス、または所定のサービ
ス条件の下で、ユーザがクラス I レベルを超えるレーザー放射に絶対にさらされないように設計されていま
す。
레이저 고지사항
프린터는 미국에서 레이저 제품용 DHHS 21 CFR Chapter I, Subchapter J 요구 사항을 준수하며 이외 지역
IEC 60825-1:2014 요구 사항을 수하는 클래스 I(1) 레이저 제품으로 승인되었습니다.
7015
Notices, conventions, and safety information
17
클래스 I 레이저 제품은 위험한 제품으로 간주되지 않습니다. 프린터에는 655675 나노미터의 파장 영역에서
작동하는 공칭 12밀리와트 갈륨 비소 레이저인 클래 IIIb(3b) 레이저가 내부에 포함되어 있습니다. 레이저
스템과 프린터는 정상적인 작동, 사용자 유지 관리 또는 사전 설명된 서비스 조건에는 사람에게 클래스 I 수준
이상의 레이저 방사가 노출되 않도록 설계되었습니다.
激光注意事
本打印机在美国认证合乎 DHHS 21 CFR Chapter ISubchapter J I (1) 激光品的准,而在其他地区
认证是合乎 IEC 60825-1: 2014 的分 I 激光品。
一般认为 I 激光品不具有危性。本打印机内部含有分 IIIb (3b) 激光,是值为 12 毫瓦的砷化
激光,其工作波 655–675nm 。本激光系及打印机的设计,在一般操作、使用者维护定内
修情况下,不会使人体接触 I 以上等射。
雷射聲明
本印表機係經過美國核可,符合 DHHS 21 CFRChapter ISubchapter J 規定的 I (1) 級雷射品;在美國以
外的地區,為符合 IEC 60825-1 2014 規定的 I 級雷射品。
根據 I 級雷射品的規定,這類品不會對人體造成傷害。本印表機部所採用之 IIIb (3b) 級雷射只會 12
毫瓦特 (milliwatt)、波長 655 675 奈米 (nanometer) 的鎵砷放射線 (gallium arsenide laser)。使用者只要以正
確的方法操作及維護保養,並依照先前所述之維修方式進行修護,此印表機與其雷射系統不會 I 級以上
的放射線,而對人體造成傷害。
Conventions
Note: A note
identifies
information that could help you.
Warning: A warning
identifies
something that could damage the product hardware or software.
CAUTION: A caution indicates a potentially hazardous situation that could injure you.
Dierent types of caution statements include:
CAUTION—POTENTIAL INJURY: Indicates a risk of injury.
CAUTION—SHOCK HAZARD: Indicates a risk of electrical shock.
CAUTION—HOT SURFACE: Indicates a risk of burn if touched.
CAUTION—TIPPING HAZARD: Indicates a crush hazard.
CAUTION—PINCH HAZARD: Indicates a risk of being caught between moving parts.
Safety information
The safety of this product is based on testing and approvals of the original design and
specific
components.
The manufacturer is not responsible for safety in the event of use of unauthorized replacement parts.
The maintenance information for this product has been prepared for use by a professional service person
and is not intended to be used by others.
7015
Notices, conventions, and safety information
18
There may be an increased risk of electrical shock and personal injury during disassembly and servicing of
this product. Professional service personnel should understand this risk and take necessary precautions.
CAUTION—SHOCK HAZARD: When you see this symbol, there is a danger from hazardous voltage
in the area of the product where you are working. Unplug the product before you begin, or use
caution if the product must receive power in order to perform the task.
CAUTION—POTENTIAL INJURY: The lithium battery in this product is not intended to be replaced.
There is a danger of explosion if a lithium battery is incorrectly replaced. Do not recharge,
disassemble, or incinerate a lithium battery. Discard used lithium batteries according to the
manufacturer's instructions and local regulations.
Consignes de sécurité
La sécurité de ce produit est basée sur des tests et certifications de sa conception d'origine et de ses
composants spécifiques. Le fabricant décline toute responsabilité en cas d'utilisation de pièces de rechange
non autorisées.
Les informations de maintenance de ce produit sont destinées à des professionnels qualifiés et ne sont pas
conçues pour être utilisées par d'autres personnes.
Il existe un risque potentiel de choc électrique et de blessures lors du démontage et de la maintenance de
ce produit. Le personnel professionnel de maintenance doit comprendre les risques et prendre les
précautions nécessaires.
ATTENTION—RISQUE D'ELECTROCUTION : Ce symbole indique un danger lié à des niveaux de
tension dangereux dans la zone du produit à manipuler. Débranchez le produit avant de commencer,
ou agissez avec prudence si le produit doit être alimenté pour eectuer l'opération.
ATTENTION—RISQUE DE BLESSURE : La batterie lithium de ce produit n'est pas destinée à être
remplacée. Si vous ne respectez pas les instructions de remplacement de la batterie, vous risquez
de provoquer une explosion. Ne rechargez pas, ne désassemblez pas et ne brûlez pas la batterie au
lithium. Mettez les batteries lithium usagées au rebut selon les instructions du fabricant et les
réglementations locales.
Informació de seguretat
La seguretat d'aquest producte es basa en les proves i les homologacions del disseny original i dels
components específics. El fabricant no és responsable de la seguretat en el cas d'ús de peces de recanvi
no autoritzades.
La informació de manteniment d'aquest producte s'ha preparat per a l'ús d'un professional tècnic i no per
a l'ús d'altres persones.
És possible que el risc de descàrrega elèctrica i lesions personals augmenti durant el desmuntatge i les
tasques de manteniment d'aquest producte. El professional tècnic ha de comprendre aquest risc i prendre
les precaucions necessàries.
PRECAUCIÓ. PERILL DE DESCÀRREGA ELÈCTRICA: Quan vegeu aquest símbol, indica que hi ha
un perill de voltatge elevat en l'àrea del producte on esteu treballant. Desconnecteu el producte
abans de començar o tingueu precaució si el producte ha de rebre alimentació per realitzar la tasca.
PRECAUCIÓ. POSSIBLES DANYS: La bateria de liti d'aquest producte no ha estat dissenyada
perquè se substitueixi. Hi ha perill d’explosió si no es substitueix correctament la bateria de liti. No
recarregueu, desmunteu o incinereu una bateria de liti. Desfeu-vos de les bateries de liti usades
d’acord amb les instruccions del fabricant i les regulacions locals.
7015
Notices, conventions, and safety information
19
Información de seguridad
La seguridad de este producto se basa en las pruebas y comprobaciones del diseño original y los
componentes
específicos.
El fabricante no se hace responsable de la seguridad en caso de uso de piezas
de repuesto no autorizadas.
La información de mantenimiento de este producto se ha preparado para su uso por parte de un profesional
de asistencia técnica y no está diseñada para su uso por parte de otros usuarios.
Es posible que haya un mayor riesgo de descarga eléctrica y daños personales durante el desmontaje y el
mantenimiento de este producto. El personal de asistencia profesional debe conocer este riesgo y tomar
las precauciones necesarias.
PRECAUCIÓN: PELIGRO DE DESCARGAS ELÉCTRICAS: Cuando vea este símbolo, existe peligro
de tensiones peligrosas en el área del producto en la que está trabajando. Desconecte el producto
antes de empezar o tenga cuidado si el producto debe recibir alimentación a fin de realizar la tarea.
PRECAUCIÓN: POSIBLES DAÑOS PERSONALES: La batería de litio de este producto no debe
reemplazarse. Existe riesgo de explosión si se sustituye incorrectamente una batería de litio. No
recargue, desmonte ni incinere una batería de litio. Deseche las baterías de litio usadas según las
instrucciones del fabricante y las normativas locales.
Informações sobre segurança
A segurança deste produto é baseada em testes e aprovações do design original e de componentes
específicos. O fabricante não é responsável por segurança em caso de uso não autorizado de peças de
substituição.
As informações sobre manutenção deste produto foram preparadas para utilização por um técnico
profissional
experiente e não se destinam ao uso por outros.
Pode haver maior risco de choque elétrico e danos pessoais durante a desmontagem e manutenção deste
produto. Os técnicos profissionais experientes devem entender esses riscos e tomar as precauções
necessárias.
ATENÇÃO—RISCO DE CHOQUE: Se você vir este símbolo, existe perigo de tensão elétrica na área
do produto onde está trabalhando. Desligue o produto antes de começar ou tenha cuidado se o
produto precisar receber energia para executar a tarefa.
ATENÇÃO—RISCO DE FERIMENTO: A bateria de lítio neste produto não deve ser substituída. Existe
o risco de explosão se uma bateria de lítio for substituída incorretamente. Não recarregue, desmonte
nem incinere uma bateria de lítio. Descarte as baterias de lítio usadas de acordo com as instruções
do fabricante e regulamentos locais.
Informazioni sulla sicurezza
La sicurezza di questo prodotto è basata sui test e sulle approvazioni del design originale e dei componenti
specifici. Il produttore non è responsabile della sicurezza in caso di utilizzo di parti di ricambio non
autorizzate.
Le informazioni di manutenzione per questo prodotto sono state predisposte per essere utilizzate da un
tecnico dell'assistenza professionale e non sono state previste per l'uso da parte di altre persone.
È possibile che vi sia un maggior rischio di scosse elettriche e lesioni personali durante lo smontaggio e la
manutenzione di questo prodotto. Il personale dell'assistenza deve comprendere questo rischio e prendere
le precauzioni necessarie.
7015
Notices, conventions, and safety information
20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236
  • Page 237 237
  • Page 238 238
  • Page 239 239
  • Page 240 240
  • Page 241 241
  • Page 242 242
  • Page 243 243
  • Page 244 244
  • Page 245 245
  • Page 246 246
  • Page 247 247
  • Page 248 248
  • Page 249 249
  • Page 250 250
  • Page 251 251
  • Page 252 252
  • Page 253 253
  • Page 254 254
  • Page 255 255
  • Page 256 256
  • Page 257 257
  • Page 258 258
  • Page 259 259
  • Page 260 260
  • Page 261 261
  • Page 262 262
  • Page 263 263
  • Page 264 264
  • Page 265 265
  • Page 266 266
  • Page 267 267
  • Page 268 268
  • Page 269 269
  • Page 270 270
  • Page 271 271
  • Page 272 272
  • Page 273 273
  • Page 274 274
  • Page 275 275
  • Page 276 276
  • Page 277 277
  • Page 278 278
  • Page 279 279
  • Page 280 280
  • Page 281 281
  • Page 282 282
  • Page 283 283
  • Page 284 284
  • Page 285 285
  • Page 286 286
  • Page 287 287
  • Page 288 288
  • Page 289 289
  • Page 290 290
  • Page 291 291
  • Page 292 292
  • Page 293 293
  • Page 294 294
  • Page 295 295
  • Page 296 296
  • Page 297 297
  • Page 298 298
  • Page 299 299
  • Page 300 300
  • Page 301 301
  • Page 302 302
  • Page 303 303
  • Page 304 304
  • Page 305 305
  • Page 306 306
  • Page 307 307
  • Page 308 308
  • Page 309 309
  • Page 310 310
  • Page 311 311
  • Page 312 312
  • Page 313 313
  • Page 314 314
  • Page 315 315
  • Page 316 316
  • Page 317 317
  • Page 318 318
  • Page 319 319
  • Page 320 320
  • Page 321 321
  • Page 322 322
  • Page 323 323
  • Page 324 324
  • Page 325 325
  • Page 326 326
  • Page 327 327
  • Page 328 328
  • Page 329 329
  • Page 330 330
  • Page 331 331
  • Page 332 332
  • Page 333 333
  • Page 334 334
  • Page 335 335
  • Page 336 336
  • Page 337 337
  • Page 338 338
  • Page 339 339
  • Page 340 340
  • Page 341 341
  • Page 342 342
  • Page 343 343
  • Page 344 344
  • Page 345 345
  • Page 346 346
  • Page 347 347
  • Page 348 348
  • Page 349 349
  • Page 350 350
  • Page 351 351
  • Page 352 352
  • Page 353 353
  • Page 354 354
  • Page 355 355
  • Page 356 356
  • Page 357 357
  • Page 358 358
  • Page 359 359
  • Page 360 360
  • Page 361 361
  • Page 362 362
  • Page 363 363
  • Page 364 364
  • Page 365 365
  • Page 366 366
  • Page 367 367
  • Page 368 368
  • Page 369 369
  • Page 370 370
  • Page 371 371
  • Page 372 372
  • Page 373 373
  • Page 374 374
  • Page 375 375
  • Page 376 376
  • Page 377 377
  • Page 378 378
  • Page 379 379
  • Page 380 380
  • Page 381 381
  • Page 382 382
  • Page 383 383
  • Page 384 384
  • Page 385 385
  • Page 386 386
  • Page 387 387
  • Page 388 388
  • Page 389 389
  • Page 390 390
  • Page 391 391
  • Page 392 392
  • Page 393 393
  • Page 394 394
  • Page 395 395
  • Page 396 396
  • Page 397 397
  • Page 398 398
  • Page 399 399
  • Page 400 400
  • Page 401 401
  • Page 402 402
  • Page 403 403
  • Page 404 404
  • Page 405 405
  • Page 406 406
  • Page 407 407
  • Page 408 408
  • Page 409 409
  • Page 410 410
  • Page 411 411
  • Page 412 412
  • Page 413 413
  • Page 414 414
  • Page 415 415
  • Page 416 416
  • Page 417 417
  • Page 418 418
  • Page 419 419
  • Page 420 420
  • Page 421 421
  • Page 422 422
  • Page 423 423
  • Page 424 424
  • Page 425 425
  • Page 426 426
  • Page 427 427
  • Page 428 428
  • Page 429 429
  • Page 430 430
  • Page 431 431
  • Page 432 432
  • Page 433 433
  • Page 434 434
  • Page 435 435
  • Page 436 436
  • Page 437 437
  • Page 438 438
  • Page 439 439
  • Page 440 440
  • Page 441 441
  • Page 442 442
  • Page 443 443
  • Page 444 444
  • Page 445 445
  • Page 446 446
  • Page 447 447
  • Page 448 448
  • Page 449 449
  • Page 450 450
  • Page 451 451
  • Page 452 452
  • Page 453 453
  • Page 454 454
  • Page 455 455
  • Page 456 456
  • Page 457 457
  • Page 458 458
  • Page 459 459
  • Page 460 460
  • Page 461 461
  • Page 462 462
  • Page 463 463
  • Page 464 464
  • Page 465 465
  • Page 466 466
  • Page 467 467
  • Page 468 468
  • Page 469 469
  • Page 470 470
  • Page 471 471
  • Page 472 472
  • Page 473 473
  • Page 474 474
  • Page 475 475
  • Page 476 476
  • Page 477 477
  • Page 478 478
  • Page 479 479
  • Page 480 480
  • Page 481 481
  • Page 482 482
  • Page 483 483
  • Page 484 484
  • Page 485 485
  • Page 486 486
  • Page 487 487
  • Page 488 488
  • Page 489 489
  • Page 490 490
  • Page 491 491
  • Page 492 492
  • Page 493 493
  • Page 494 494
  • Page 495 495
  • Page 496 496
  • Page 497 497
  • Page 498 498
  • Page 499 499
  • Page 500 500
  • Page 501 501
  • Page 502 502
  • Page 503 503
  • Page 504 504
  • Page 505 505
  • Page 506 506
  • Page 507 507
  • Page 508 508
  • Page 509 509
  • Page 510 510

Lexmark MX410 Series Manuale utente

Categoria
Stampanti laser / LED
Tipo
Manuale utente
Questo manuale è adatto anche per

in altre lingue