Lexmark 16C0201 - X 620e MFP B/W Laser Setup Manual

Setup Guide

April 2002

MFP X4500 Option

English

Edition: January 2002

The following paragraph does not apply to any country where such provisions are inconsistent with local law:

LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND,

EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express

or implied warranties in certain transactions; therefore, this statement may not apply to you.

This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the

information herein; these changes will be incorporated in later editions. Improvements or changes in the products or

the programs described may be made at any time.

Comments about this publication may be addressed to Lexmark International, Inc., Department F95/032-2, 740 West

New Circle Road, Lexington, Kentucky 40550, U.S.A. In the United Kingdom and Eire, send to Lexmark International

Ltd., Marketing and Services Department, Westhorpe House, Westhorpe, Marlow Bucks SL7 3RQ. Lexmark may use

or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you.

You can purchase additional copies of publications related to this product by calling 1-800-553-9727. In the United

Kingdom and Eire, call 0628-481500. In other countries, contact your point of purchase.

References in this publication to products, programs, or services do not imply that the manufacturer intends to make

these available in all countries in which it operates. Any reference to a product, program, or service is not intended to

state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or

service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of

operation in conjunction with other products, programs, or services, except those expressly designated by the

manufacturer, are the user’s responsibility.

Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United

States and/or other countries. ScanBack is a trademark of Lexmark International, Inc.

Copyright advisory

It may be illegal to copy certain materials without permission or license, including documents, images, and currency. If

you are not sure whether you have permission, seek legal advice.

UNITED STATES GOVERNMENT RESTRICTED RIGHTS

This software and documentation are provided with RESTRICTED RIGHTS. Use, duplication or disclosure by the

Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and

Computer Software clause at DFARS 252.227-7013 and in applicable FAR provisions: Lexmark International, Inc.,

Lexington, KY 40550.

v

Table of contents

Step 1: Set up your printer, stand, and scanner . . . . . . . . 1

Unpacking the scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Setting up your printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Verifying your printer firmware level . . . . . . . . . . . . . . . . . . . . .2

Setting up your stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Unlocking the scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Step 2: Set up the trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Step 3: Attach cables and cords . . . . . . . . . . . . . . . . . . . . . 5

Step 4: Complete the hardware setup . . . . . . . . . . . . . . . . . 6

Attaching the Quick Reference . . . . . . . . . . . . . . . . . . . . . . . . .6

Installing the printer operator panel cover . . . . . . . . . . . . . . . .6

Turning on the scanner and printer . . . . . . . . . . . . . . . . . . . . . .7

Step 5: Configure your MFP . . . . . . . . . . . . . . . . . . . . . . . . . 8

Setting the IP address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Configuring Scan to E-mail . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Configuring Fax Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Registering with a Windows NT domain server . . . . . . . . . . .10

vi

Table of contents

Step 6: Verify setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Making a test copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Sending a test fax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Sending a test e-mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Sending a network print job to the MFP . . . . . . . . . . . . . . . . .12

Maintaining your MFP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Cleaning the touch screen . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Cleaning the scanner bed . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Paper feeding problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Cleaning the feeding rollers and pick pad . . . . . . . . . . . . . . . .15

Replacing the pick pad assembly . . . . . . . . . . . . . . . . . . . . . .16

Moving the scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Document Distributor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Emission notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Telecommunications notices . . . . . . . . . . . . . . . . . . . . . . . . .22

1

Set up your printer, stand, and scanner

Step 1: Set up your printer,

stand, and scanner

Unpacking the scanner

Unpack the Lexmark X4500 MFP

Option. Make sure you have the

following items:

•

Scanner

•

Ethernet cable (RJ-45)

•

Telephone fax line cable

(RJ-11)

•

Folder with Setup Guide (includes

the MFP CD in the back of the

book), and Quick Reference

guides

•

Power supply

•

Power supply line cord

•

Output paper bin

Save the packing material until the

system is completely set up and working

correctly.

Folder

Scanner

Output

paper bin

Power supply

line cord

Power

supply

Ethernet cable

Telephone fax

line cable

2

Set up your printer, stand, and scanner

Setting up your printer

1

Set up the printer according to the

instructions in the documentation

shipped with your printer. This

includes setting up all bins and

trays, duplex hardware, and any

other options purchased.

2

Before and during MFP setup,

unplug all power cords, fax and

phone cables, and network cables

from their outlets.

3

Following setup, you may plug all

equipment into properly grounded

outlets and turn them on.

Verifying your printer

firmware level

To check the minimum firmware level

needed for your MFP to function:

1

Go to http://support.lexmark.com.

2

Select your country and language.

3

Under Multifunction Printers,

select X4500 MFP option.

4

Click Go.

5

Select X4500 Minimum

Requirements.

Verify that the firmware level listed

matches your printer firmware.

If they do not match, follow the

instructions on the Web site to upgrade

your firmware.

3

Set up your printer, stand, and scanner

Setting up your stand

Your printer comes with several stand

options, depending on your needs.

To assemble the stand and attach it to

the printer, refer to the instructions that

came with the stand.

If you did not purchase a stand and you

plan to position the scanner on top of the

Lexmark™ C750 Finisher for MFP, refer

to the instructions that came with the

finisher.

Unlocking the scanner

1

Make sure the printer is turned off

and unplugged.

2

Unlock your scanner:

a

Locate the lock switch on the

right side of the scanner.

b

Push the switch to the

unlocked position.

4

Set up the trays

Step 2: Set up the trays

Note:

The automatic document feeder

and the document feed tray are attached

to the scanner before it is shipped.

1

Attach the output paper bin to the

automatic document feeder.

2

Lift the document feed tray and

snap the support bar into the top

of the scanner lid.

Document feed tray

Output paper bin

5

Attach cables and cords

Step 3: Attach cables and cords

CAUTION!

Do not plug the power

supply line cord into an outlet at this

time.

1

Make sure the printer and scanner

are turned off and unplugged.

2

Connect the end of the Ethernet

cable with the toroid to Ethernet

port 1 on the scanner. Connect

the other end to the printer.

3

Connect the telephone fax line

cable to the scanner and then to a

phone jack using a telephone line

adapter, if necessary.

4

Connect standard cabling

compatible with your network to

Ethernet port 2 on the scanner,

and then to a network connection.

This cable is not provided by

Lexmark.

5

Connect the power supply to the

scanner.

Warning!

Never connect or disconnect

the Ethernet cable when the scanner is

turned on.

6

Connect the power supply line

cord to the power supply, but

do

not

plug the other end into an

electrical outlet at this time.

Power

supply line

cord

Ethernet cable

Telephone fax line cable

Power supply

Ethernet port 2

6

Complete the hardware setup

Step 4: Complete the

hardware setup

Attaching the

Quick Reference

1

Peel the backing off of the

adhesive strip on the back of the

Quick Reference.

2

Press the Quick Reference into

place above the touch screen.

Installing the printer

operator panel cover

Please refer to the instructions that came

with operator panel cover.

7

Complete the hardware setup

Turning on the scanner

and printer

1

Plug the printer and the power

supply line cord into properly

grounded electrical outlets.

2

Turn the printer on.

3

Turn on the scanner.

The MFP requires time to warm up after

you turn it on.

After the MFP completes its tests, the

Home screen is displayed on the touch

screen.

8

Configure your MFP

Step 5: Configure your MFP

The following settings are the minimum required to perform basic

functions such as print, copy, fax, or e-mail. Some of these settings

may require assistance from your network administrator.

Setting the

IP address

You must have an IP address for network devices to find the MFP on

the network. If you have DHCP, the proper address values are

automatically assigned.

To check your IP address, or to assign one manually if you do not

have DHCP:

1

From the Home screen, touch the Key icon, and then touch

System Configuration.

2

Under Printer/Print Server, touch Setup and Configuration.

3

Under the Print Server, touch TCP/IP.

4

Address, Netmask, and Gateway are required fields, and

should have nonzero values. If necessary, use the virtual

keyboard and enter the appropriate information for your

network. Set any additional information you want.

5

Touch Submit when you are finished entering information.

6

Wait for the configuration page to refresh, and then verify the

parameters are as intended.

After configuring the IP address, you can use your Web browser to

remotely view and manage the MFP. Type the IP address in the URL

field of the browser (for example, http://192.168.236.24), and then

press Enter.

9

Configure your MFP

Configuring

Scan to E-mail

1

Type the MFP IP address in your browser URL field (for

example, http://192.168.236.24), and then press Enter.

2

Click Configuration.

3

Click Scan to E-mail General Setup.

4

Type the SMTP gateway of your network or Internet service

provider in the appropriate field. Specify a default e-mail

address for the message reply line.

5

Click Submit.

Configuring

Fax Setup

The Telephone Consumer Protection Act of 1991 requires all

outgoing faxes to contain specific information in a margin at the top or

bottom of each transmitted page, or on the first page of the

transmission.

Use your Web browser to set the required fax information:

1

Type the MFP IP address in your browser URL field (for

example, http://192.168.236.24), and then press Enter.

2

Click Configuration, and then click Fax Setup

:

— If Analog doesn’t appear in the drop-down menu, select it

now. Click Submit.

— If Analog does appear in the drop-down menu, click

Configuration.

3

After the configuration page refreshes, enter the required FCC

information:

— Station Name (a personal name or company name)

— Station Number (the fax phone number)

Set or change any additional fax settings, and then click

Submit.

4

Check the current date and time;

a

Click Configuration.

b

Click Setup and Configuration.

c

Click Date and Time.

10

Configure your MFP

5

Check the date and time:

— If they are correct, you are done.

— If they are not correct, click the Set Date and Time link

under the Current Date and Time. Enter the date and time

information in a numerical format (YYYY-MM-DD-HH:MM),

and then click Submit.

If you want to configure for the Fax Server mode, return to the Fax

Setup configuration page and switch modes.

Registering with a

Windows NT

domain server

To use Windows NT Authentication as a way of restricting or tracking

access to your MFP, you must first register the device with a Windows

NT domain. Contact your network administrator for assistance with

registering with a Windows NT domain.

Note:

In order to register the

MFP with a Windows NT

domain, you must have an

administrator account name and

password for the intended

domain.

Touch the Key icon on the Home screen, and then touch Windows NT

Domain Registration. Tips are on the screens to help you with the

registration process.

11

Verify setup

Step 6: Verify setup

Making a test copy

Make a one-page copy and test the automatic document feeder:

1

Place your document face down in the automatic document

feeder.

2

Press the green Start button to the right of the touch screen,

(Copy is the default setting for the MFP).

3

Touch Done.

Sending a test fax

Send a one-page test fax to a known fax machine:

1

From the Home screen, touch the Fax icon.

2

In the Fax destination screen, enter a fax number using the

virtual keypad.

3

Place your document face down on the scanner bed.

4

Touch Fax It or press Start to send the fax.

5

Touch Done.

12

Verify setup

Sending a

test e-mail

Send a one-page test e-mail to a known e-mail address:

1

From the Home screen, touch the E-mail icon.

2

In the E-mail destination screen, enter an e-mail address using

the virtual keypad.

3

Place your document face down on the scanner bed.

4

Touch Send It or press Start to scan and send the document.

5

Touch Done.

Sending a

network print

job to the MFP

Use a computer application to send a network print job to your MFP.

Consult your printer documentation for assistance with setting up a

computer for network printing.

13

Maintaining your MFP

Cleaning the

touch screen

1

Dampen a clean, lint-free cotton

cloth with water.

Warning!

Do not spray the touch

screen with water or glass cleaner.

Liquid can damage the MFP.

2

Wipe the touch screen.

Cleaning the

scanner bed

1

Dampen a clean, lint-free cotton

cloth with water.

2

Open the cover.

3

Wipe the scanner bed glass.

14

Maintaining your MFP

Paper feeding

problems

If you are experiencing paper feed

problems, such as:

•

The scanner is double-picking

(two sheets feed through at the

same time), or;

•

The scanner is not picking (no

paper feeds through)

You should try cleaning the automatic

document feeder first. See “Cleaning

the feeding rollers and pick pad” on

page 15. If this does not solve the feed

problems, you may have to replace the

pick pad, see “Replacing the pick pad

assembly” on page 16.

If you are still having problems after

replacing the pick pad assembly, go to

the Lexmark support Web site at

http://support.lexmark.com for more

information.

15

Maintaining your MFP

Cleaning the feeding

rollers and pick pad

1

Turn off the scanner and

disconnect the power.

2

Dampen a clean, lint-free cotton

cloth with water.

3

Open the automatic document

feeder, and then wipe the feeding

rollers by moving the cloth from

side to side.

4

Rotate each roller forward with

your finger and wipe with the cloth

until the entire roller is cleaned.

5

Gently wipe the pick pad face with

the damp cloth

6

Close the automatic document

feeder.

7

Plug in the scanner and turn it

back on.

Feeding rollers

Pick pad

La pagina sta caricando ...

Lexmark 16C0201 - X 620e MFP B/W Laser Setup Manual

Questo manuale è adatto anche per

Lexmark 16C0201 - X 620e MFP B/W Laser Setup Manual

in altre lingue

Documenti correlati

Altri documenti