Lexmark X4500 Setup Manual

Categoria
Multifunzionali
Tipo
Setup Manual

Questo manuale è adatto anche per

Setup Guide
April 2002
MFP X4500 Option
English
Edition: January 2002
The following paragraph does not apply to any country where such provisions are inconsistent with local law:
LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express
or implied warranties in certain transactions; therefore, this statement may not apply to you.
This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the
information herein; these changes will be incorporated in later editions. Improvements or changes in the products or
the programs described may be made at any time.
Comments about this publication may be addressed to Lexmark International, Inc., Department F95/032-2, 740 West
New Circle Road, Lexington, Kentucky 40550, U.S.A. In the United Kingdom and Eire, send to Lexmark International
Ltd., Marketing and Services Department, Westhorpe House, Westhorpe, Marlow Bucks SL7 3RQ. Lexmark may use
or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you.
You can purchase additional copies of publications related to this product by calling 1-800-553-9727. In the United
Kingdom and Eire, call 0628-481500. In other countries, contact your point of purchase.
References in this publication to products, programs, or services do not imply that the manufacturer intends to make
these available in all countries in which it operates. Any reference to a product, program, or service is not intended to
state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or
service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of
operation in conjunction with other products, programs, or services, except those expressly designated by the
manufacturer, are the user’s responsibility.
Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United
States and/or other countries. ScanBack is a trademark of Lexmark International, Inc.
Copyright advisory
It may be illegal to copy certain materials without permission or license, including documents, images, and currency. If
you are not sure whether you have permission, seek legal advice.
© Copyright 2002 Lexmark International, Inc.
All rights reserved.
UNITED STATES GOVERNMENT RESTRICTED RIGHTS
This software and documentation are provided with RESTRICTED RIGHTS. Use, duplication or disclosure by the
Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and
Computer Software clause at DFARS 252.227-7013 and in applicable FAR provisions: Lexmark International, Inc.,
Lexington, KY 40550.
v
Table of contents
Table of contents
Step 1: Set up your printer, stand, and scanner . . . . . . . . 1
Unpacking the scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Setting up your printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Verifying your printer firmware level . . . . . . . . . . . . . . . . . . . . .2
Setting up your stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Unlocking the scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Step 2: Set up the trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Step 3: Attach cables and cords . . . . . . . . . . . . . . . . . . . . . 5
Step 4: Complete the hardware setup . . . . . . . . . . . . . . . . . 6
Attaching the Quick Reference . . . . . . . . . . . . . . . . . . . . . . . . .6
Installing the printer operator panel cover . . . . . . . . . . . . . . . .6
Turning on the scanner and printer . . . . . . . . . . . . . . . . . . . . . .7
Step 5: Configure your MFP . . . . . . . . . . . . . . . . . . . . . . . . . 8
Setting the IP address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Configuring Scan to E-mail . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Configuring Fax Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Registering with a Windows NT domain server . . . . . . . . . . .10
vi
Table of contents
Step 6: Verify setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Making a test copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Sending a test fax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Sending a test e-mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Sending a network print job to the MFP . . . . . . . . . . . . . . . . .12
Maintaining your MFP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Cleaning the touch screen . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Cleaning the scanner bed . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Paper feeding problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Cleaning the feeding rollers and pick pad . . . . . . . . . . . . . . . .15
Replacing the pick pad assembly . . . . . . . . . . . . . . . . . . . . . .16
Moving the scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Document Distributor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Emission notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Telecommunications notices . . . . . . . . . . . . . . . . . . . . . . . . .22
1
Set up your printer, stand, and scanner
Step 1: Set up your printer,
stand, and scanner
Unpacking the scanner
Unpack the Lexmark X4500 MFP
Option. Make sure you have the
following items:
Scanner
Ethernet cable (RJ-45)
Telephone fax line cable
(RJ-11)
Folder with Setup Guide (includes
the MFP CD in the back of the
book), and Quick Reference
guides
Power supply
Power supply line cord
Output paper bin
Save the packing material until the
system is completely set up and working
correctly.
Folder
Scanner
Output
paper bin
Power supply
line cord
Power
supply
Ethernet cable
Telephone fax
line cable
2
Set up your printer, stand, and scanner
Setting up your printer
1
Set up the printer according to the
instructions in the documentation
shipped with your printer. This
includes setting up all bins and
trays, duplex hardware, and any
other options purchased.
2
Before and during MFP setup,
unplug all power cords, fax and
phone cables, and network cables
from their outlets.
3
Following setup, you may plug all
equipment into properly grounded
outlets and turn them on.
Verifying your printer
firmware level
To check the minimum firmware level
needed for your MFP to function:
1
Go to http://support.lexmark.com.
2
Select your country and language.
3
Under Multifunction Printers,
select X4500 MFP option.
4
Click Go.
5
Select X4500 Minimum
Requirements.
Verify that the firmware level listed
matches your printer firmware.
If they do not match, follow the
instructions on the Web site to upgrade
your firmware.
3
Set up your printer, stand, and scanner
Setting up your stand
Your printer comes with several stand
options, depending on your needs.
To assemble the stand and attach it to
the printer, refer to the instructions that
came with the stand.
If you did not purchase a stand and you
plan to position the scanner on top of the
Lexmark C750 Finisher for MFP, refer
to the instructions that came with the
finisher.
Unlocking the scanner
1
Make sure the printer is turned off
and unplugged.
2
Unlock your scanner:
a
Locate the lock switch on the
right side of the scanner.
b
Push the switch to the
unlocked position.
4
Set up the trays
Step 2: Set up the trays
Note:
The automatic document feeder
and the document feed tray are attached
to the scanner before it is shipped.
1
Attach the output paper bin to the
automatic document feeder.
2
Lift the document feed tray and
snap the support bar into the top
of the scanner lid.
Document feed tray
Output paper bin
5
Attach cables and cords
Step 3: Attach cables and cords
CAUTION!
Do not plug the power
supply line cord into an outlet at this
time.
1
Make sure the printer and scanner
are turned off and unplugged.
2
Connect the end of the Ethernet
cable with the toroid to Ethernet
port 1 on the scanner. Connect
the other end to the printer.
3
Connect the telephone fax line
cable to the scanner and then to a
phone jack using a telephone line
adapter, if necessary.
4
Connect standard cabling
compatible with your network to
Ethernet port 2 on the scanner,
and then to a network connection.
This cable is not provided by
Lexmark.
5
Connect the power supply to the
scanner.
Warning!
Never connect or disconnect
the Ethernet cable when the scanner is
turned on.
6
Connect the power supply line
cord to the power supply, but
do
not
plug the other end into an
electrical outlet at this time.
Power
supply line
cord
Ethernet cable
Telephone fax line cable
Power supply
Ethernet port 2
6
Complete the hardware setup
Step 4: Complete the
hardware setup
Attaching the
Quick Reference
1
Peel the backing off of the
adhesive strip on the back of the
Quick Reference.
2
Press the Quick Reference into
place above the touch screen.
Installing the printer
operator panel cover
Please refer to the instructions that came
with operator panel cover.
7
Complete the hardware setup
Turning on the scanner
and printer
1
Plug the printer and the power
supply line cord into properly
grounded electrical outlets.
2
Turn the printer on.
3
Turn on the scanner.
The MFP requires time to warm up after
you turn it on.
After the MFP completes its tests, the
Home screen is displayed on the touch
screen.
8
Configure your MFP
Step 5: Configure your MFP
The following settings are the minimum required to perform basic
functions such as print, copy, fax, or e-mail. Some of these settings
may require assistance from your network administrator.
Setting the
IP address
You must have an IP address for network devices to find the MFP on
the network. If you have DHCP, the proper address values are
automatically assigned.
To check your IP address, or to assign one manually if you do not
have DHCP:
1
From the Home screen, touch the Key icon, and then touch
System Configuration.
2
Under Printer/Print Server, touch Setup and Configuration.
3
Under the Print Server, touch TCP/IP.
4
Address, Netmask, and Gateway are required fields, and
should have nonzero values. If necessary, use the virtual
keyboard and enter the appropriate information for your
network. Set any additional information you want.
5
Touch Submit when you are finished entering information.
6
Wait for the configuration page to refresh, and then verify the
parameters are as intended.
After configuring the IP address, you can use your Web browser to
remotely view and manage the MFP. Type the IP address in the URL
field of the browser (for example, http://192.168.236.24), and then
press Enter.
9
Configure your MFP
Configuring
Scan to E-mail
1
Type the MFP IP address in your browser URL field (for
example, http://192.168.236.24), and then press Enter.
2
Click Configuration.
3
Click Scan to E-mail General Setup.
4
Type the SMTP gateway of your network or Internet service
provider in the appropriate field. Specify a default e-mail
address for the message reply line.
5
Click Submit.
Configuring
Fax Setup
The Telephone Consumer Protection Act of 1991 requires all
outgoing faxes to contain specific information in a margin at the top or
bottom of each transmitted page, or on the first page of the
transmission.
Use your Web browser to set the required fax information:
1
Type the MFP IP address in your browser URL field (for
example, http://192.168.236.24), and then press Enter.
2
Click Configuration, and then click Fax Setup
:
If Analog doesnt appear in the drop-down menu, select it
now. Click Submit.
If Analog does appear in the drop-down menu, click
Configuration.
3
After the configuration page refreshes, enter the required FCC
information:
Station Name (a personal name or company name)
Station Number (the fax phone number)
Set or change any additional fax settings, and then click
Submit.
4
Check the current date and time;
a
Click Configuration.
b
Click Setup and Configuration.
c
Click Date and Time.
10
Configure your MFP
5
Check the date and time:
If they are correct, you are done.
If they are not correct, click the Set Date and Time link
under the Current Date and Time. Enter the date and time
information in a numerical format (YYYY-MM-DD-HH:MM),
and then click Submit.
If you want to configure for the Fax Server mode, return to the Fax
Setup configuration page and switch modes.
Registering with a
Windows NT
domain server
To use Windows NT Authentication as a way of restricting or tracking
access to your MFP, you must first register the device with a Windows
NT domain. Contact your network administrator for assistance with
registering with a Windows NT domain.
Note:
In order to register the
MFP with a Windows NT
domain, you must have an
administrator account name and
password for the intended
domain.
Touch the Key icon on the Home screen, and then touch Windows NT
Domain Registration. Tips are on the screens to help you with the
registration process.
11
Verify setup
Step 6: Verify setup
Making a test copy
Make a one-page copy and test the automatic document feeder:
1
Place your document face down in the automatic document
feeder.
2
Press the green Start button to the right of the touch screen,
(Copy is the default setting for the MFP).
3
Touch Done.
Sending a test fax
Send a one-page test fax to a known fax machine:
1
From the Home screen, touch the Fax icon.
2
In the Fax destination screen, enter a fax number using the
virtual keypad.
3
Place your document face down on the scanner bed.
4
Touch Fax It or press Start to send the fax.
5
Touch Done.
12
Verify setup
Sending a
test e-mail
Send a one-page test e-mail to a known e-mail address:
1
From the Home screen, touch the E-mail icon.
2
In the E-mail destination screen, enter an e-mail address using
the virtual keypad.
3
Place your document face down on the scanner bed.
4
Touch Send It or press Start to scan and send the document.
5
Touch Done.
Sending a
network print
job to the MFP
Use a computer application to send a network print job to your MFP.
Consult your printer documentation for assistance with setting up a
computer for network printing.
13
Maintaining your MFP
Maintaining your MFP
Cleaning the
touch screen
1
Dampen a clean, lint-free cotton
cloth with water.
Warning!
Do not spray the touch
screen with water or glass cleaner.
Liquid can damage the MFP.
2
Wipe the touch screen.
Cleaning the
scanner bed
1
Dampen a clean, lint-free cotton
cloth with water.
2
Open the cover.
3
Wipe the scanner bed glass.
14
Maintaining your MFP
Paper feeding
problems
If you are experiencing paper feed
problems, such as:
The scanner is double-picking
(two sheets feed through at the
same time), or;
The scanner is not picking (no
paper feeds through)
You should try cleaning the automatic
document feeder first. See Cleaning
the feeding rollers and pick pad on
page 15. If this does not solve the feed
problems, you may have to replace the
pick pad, see Replacing the pick pad
assembly on page 16.
If you are still having problems after
replacing the pick pad assembly, go to
the Lexmark support Web site at
http://support.lexmark.com for more
information.
15
Maintaining your MFP
Cleaning the feeding
rollers and pick pad
1
Turn off the scanner and
disconnect the power.
2
Dampen a clean, lint-free cotton
cloth with water.
3
Open the automatic document
feeder, and then wipe the feeding
rollers by moving the cloth from
side to side.
4
Rotate each roller forward with
your finger and wipe with the cloth
until the entire roller is cleaned.
5
Gently wipe the pick pad face with
the damp cloth
6
Close the automatic document
feeder.
7
Plug in the scanner and turn it
back on.
Feeding rollers
Pick pad
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168

Lexmark X4500 Setup Manual

Categoria
Multifunzionali
Tipo
Setup Manual
Questo manuale è adatto anche per

in altre lingue