Philips 9000 Series Manuale utente

20

19

21

23 24

22

4

1

2

3

5

6

7

17

18

25

26

27

29

9

10

12

11

13

14

15

16

28

8

empty page before TOC

English 6

Deutsch 41

Français 80

Italiano 119

English

Contents

Introduction_______________________________________________________ 7

Important safety information_____________________________________ 7

Danger____________________________________________________________ 7

Warning___________________________________________________________ 8

Caution____________________________________________________________ 9

Electromagnetic fields (EMF)_____________________________________ 11

General____________________________________________________________ 11

General description (Fig. 1)_______________________________________ 11

The display________________________________________________________ 12

Personal comfort settings________________________________________ 12

Charging___________________________________________________________ 13

Battery fully charged______________________________________________ 13

Battery low________________________________________________________ 13

Remaining battery charge________________________________________ 13

Cleaning reminder________________________________________________ 14

Travel lock_________________________________________________________ 14

Replacement reminder___________________________________________ 14

Notification symbol_______________________________________________ 15

Charging___________________________________________________________ 15

Charging with the supply unit____________________________________ 16

Charging in the SmartClean system (specific types only)_______ 16

Using the appliance______________________________________________ 17

Switching the appliance on and off______________________________ 17

Shaving____________________________________________________________ 17

Using the click-on attachments__________________________________ 19

Cleaning and maintenance_______________________________________ 23

Cleaning the shaver in the SmartClean system__________________ 23

Cleaning the shaver under the tap_______________________________ 27

Thorough cleaning________________________________________________ 29

Cleaning the click-on attachment________________________________ 31

Storage____________________________________________________________ 33

6

English

Replacement______________________________________________________ 34

Replacing the shaving heads_____________________________________ 34

Replacing the cleansing brush attachment______________________ 35

Ordering accessories_____________________________________________ 35

Recycling__________________________________________________________ 35

Removing the rechargeable shaver battery_____________________ 36

Warranty and support____________________________________________ 37

Warranty restrictions______________________________________________ 37

Troubleshooting__________________________________________________ 37

Shaver_____________________________________________________________ 37

SmartClean _______________________________________________________ 39

Introduction

Congratulations on your purchase and welcome to

Philips! To fully benefit from the support that

Philips offers, register your product at

www.philips.com/welcome.

Please read this user manual, as it contains

information about the features of this shaver as

well as some tips to make shaving easier and more

enjoyable.

Important safety information

Read this important information carefully before

you use the appliance and its accessories and save

it for future reference. The accessories supplied

may vary for different products.

Danger

- Keep the supply unit dry.

7

English

Warning

- To charge the battery, only use the

detachable supply unit (type HQ8505)

provided with the appliance.

- The supply unit contains a transformer. Do

not cut off the supply unit to replace it with

another plug, as this causes a hazardous

situation.

- This appliance can be used by children aged

from 8 years and above and persons with

reduced physical, sensory or mental

capabilities or lack of experience and

knowledge if they have been given

supervision or instruction concerning use of

the appliance in a safe way and understand

the hazards involved. Children shall not play

with the appliance. Cleaning and user

maintenance shall not be made by children

without supervision.

- Always unplug the shaver before you clean

it under the tap.

- Always check the appliance before you use

it. Do not use the appliance if it is damaged,

as this may cause injury. Always replace a

damaged part with one of the original type.

8

English

- Do not open the appliance to replace the

rechargeable battery.

Caution

- Never immerse the cleaning

system or the charging stand in

water and do not rinse it under

the tap.

- Never use water hotter than

60°C to rinse the shaver.

- Only use this appliance for its

intended purpose as shown in

the user manual.

- For hygienic reasons, the

appliance should only be used

by one person.

- Never use compressed air,

scouring pads, abrasive

cleaning agents or aggressive

liquids such as petrol or

acetone to clean the appliance.

- If your shaver comes with a

cleaning system, always use the

original Philips cleaning fluid

(cartridge or bottle, depending

on the type of cleaning system).

9

English

- Always place the cleaning

system on a stable, level and

horizontal surface to prevent

leakage.

- If your cleaning system uses a

cleaning cartridge, always make

sure the cartridge compartment

is closed before you use the

cleaning system to clean or

charge the shaver.

- When the cleaning system is

ready for use, do not move it to

prevent leakage of cleaning

fluid.

- Water may drip from the socket

at the bottom of the shaver

when you rinse it. This is normal

and not dangerous because all

electronics are enclosed in a

sealed power unit inside the

shaver.

10

English

- Do not use the supply unit in or

near wall sockets that contain

an electric air freshener to

prevent irreparable damage to

the supply unit.

Electromagnetic fields (EMF)

This Philips appliance complies with all applicable

standards and regulations regarding exposure to

electromagnetic fields.

General

- This shaver is waterproof. It is suitable for use in

the bath or shower and for cleaning under the

tap. For safety reasons, the shaver can

therefore only be used without cord.

- The supply unit is suitable for mains voltages

ranging from 100 to 240 volts.

- The supply unit transforms 100-240 volts to a

safe low voltage of less than 24 volts.

General description (Fig. 1)

1 Protection cap for cleansing brush attachment

2 Click-on cleansing brush attachment

3 Attachment base

4 Comb for beard styler attachment

5 Click-on beard styler attachment

6 Click-on shaving unit

7 On/off button

8 Socket for small plug

9 Notification symbol

10 Replacement reminder

11 Travel lock symbol

12 Cleaning reminder

13 Charge symbol

14 Battery charge percentage

11

English

15 Personal comfort settings bar

16 + and - buttons for personal comfort settings

17 SmartClean system

18 Cap of SmartClean system

19 On/off button

20 Replacement symbol

21 Rinsing symbol

22 Drying symbol

23 Ready symbol

24 Charge symbol

25 Cleaning cartridge for SmartClean system

26 Supply unit

27 Small plug

28 Cleaning brush

29 Pouch

The display

Note: Before you use the shaver for the first time,

remove the protective foil from the display.

Personal comfort settings

The appliance has a feature that allows you to

personalise your settings. You can choose

between three settings depending on your

personal shaving needs (from low to high):

comfort, dynamic or efficiency. When you press the

- or + button, the segment of the personal comfort

settings bar that lights up shows the currently

selected setting. You can press the + or - button to

select a different setting.

12

English

Charging

When the shaver is charging, the battery charge

percentage and the battery symbol flash white.

The battery charge is indicated by the battery

charge percentage shown on the display.

Quick charge: When the battery symbol starts to

flash quickly, the shaver contains enough charge

for one shave.

Battery fully charged

When the battery is fully charged, the battery

charge percentage lights up white continuously.

Note: This appliance can only be used without

cord. When you press the on/off button during or

after charging, you hear a sound to indicate that

the shaver is still connected to the wall socket.

Note: When the battery is full, the display switches

off automatically after 30 minutes.

Battery low

When the battery is almost empty, the battery

charge indicator flashes orange and the shaver

beeps.

Remaining battery charge

The remaining battery charge is indicated by the

battery charge percentage shown on the display.

13

English

Cleaning reminder

Clean the shaver after every use for optimal

performance. When you switch off the appliance,

the cleaning reminder flashes to remind you to

clean the appliance.

Travel lock

When you are going to travel, you can lock the

shaver to prevent it from accidentally switching on.

Activating the travel lock

1 Press the on/off button for 3 seconds to use

the travel lock mode.

While you activate the travel lock, the travel lock

symbol lights up briefly and the shaver

produces a short sound. When the travel lock is

activated, the appliance produces a sound and

the travel lock symbol flashes.

Deactivating the travel lock

1 Press the on/off button for 3 seconds.

While you deactivate the travel lock, the travel

lock symbol lights up briefly and the shaver

produces a short sound.The appliance switches

on and is now ready for use again.

Note: You can also deactivate the travel lock by

connecting the appliance to the wall socket.

Replacement reminder

For maximum shaving performance, we advise you

to replace the shaving heads every two years.

14

English

The appliance is equipped with a replacement

reminder which reminds you to replace the

shaving heads. The shaver beeps, the replacement

reminder lights up and the arrows flash to indicate

that you have to replace the shaving heads.

Note: After replacing the shaving heads, you can

reset the replacement reminder by pressing the

on/off button for 7 seconds. If you do not reset the

replacement reminder, the shaver resets

automatically after 9 shaves.

Notification symbol

Overheating

If the appliance overheats during charging, the

notification symbol flashes orange. When this

happens, the shaver switches off automatically.

Charging continues once the temperature of the

appliance has decreased to the normal level.

Blocked shaving heads

If the shaving heads are blocked, the notification

symbol lights up orange continuously. The

replacement reminder and the cleaning reminder

flash white alternately and the shaver beeps. In

this case, the motor cannot run because the

shaving heads are soiled or damaged.

If the shaving heads are soiled, you have to clean

them. If the shaving heads are damaged, you have

to replace them.

Charging

Charge the shaver before you use it for the first

time and when the display indicates that the

battery is almost empty. The battery charge is

15

English

indicated by the battery charge percentage shown

on the display.

When you connect the shaver to the wall socket,

you hear a sound.

Charging takes approx. 1 hour. A fully charged

shaver has a shaving time of up to 60 minutes.

Note: You cannot use the appliance while it is

charging.

Charging with the supply unit

1 Make sure the appliance is switched off.

1

2

2 Put the small plug in the appliance and put the

supply unit in the wall socket.

When you connect the shaver to the wall

socket, you hear a sound.

3 After charging, remove the supply unit from the

wall socket and pull the small plug out of the

appliance.

Charging in the SmartClean system (specific types

only)

1 Put the small plug in the back of the

SmartClean system.

2 Put the supply unit in the wall socket.

3 Press to open the SmartClean system cap, to be

able to place the shaver in the holder ('click').

16

English

4 Hold the shaver upside down above the holder.

Make sure the front of the shaver points

towards the SmartClean system holder.

1

2

3

5 Place the shaver in the holder, tilt the shaver

backwards and press down the SmartClean

system cap to connect the shaver (‘click’).

Note: The battery symbol starts to flash to indicate

that theappliance is charging. When the battery is

fully charged, the battery symbol lights up

continuously.

Using the appliance

Note: This appliance can only be used without

cord.

Switching the appliance on and off

- To switch on the appliance, press the on/off

button once.

The display lights up for a few seconds.

- To switch off the appliance, press the on/off

button once.

The display lights up for a few seconds and

shows the remaining battery charge.

Shaving

Skin adaptation period

Your first shaves may not bring you the result you

expect and your skin may even become slightly

irritated. This is normal. Your skin and beard need

time to adapt to any new shaving system. To allow

your skin to adapt to this new appliance, we advise

you to shave regularly (at least 3 times a week) and

17

English

exclusively with this appliance for a period of 3

weeks.

Shaving tips

- Selectyour personal comfort settings (see ‘The

display’).

- For the best results on skin comfort, pre-trim

your beard if you have not shaved for 3 days or

longer.

Dry shaving

1 Switch on the appliance.

The display lights up for a few seconds.

2 Move the shaving heads over your skin in

circular movements to catch all hairs growing in

different directions. Make sure each shaving

head is fully in contact with the skin. Exert

gentle pressure for a close, comfortable shave.

Note: Do not press too hard, as this can cause

skin irritation.

3 Clean the appliance after use.

Wet shaving

For a more comfortable shave, you can also use

this appliance on a wet face with shaving foam or

shaving gel.

To shave with shaving foam or shaving gel, follow

the steps below:

1 Apply some water to your skin.

18

English

2 Apply shaving foam or shaving gel to your skin.

3 Rinse the shaving unit under the tap to ensure

that the shaving unit glides smoothly over your

skin.

4 Switch on the appliance.

5 Move the shaving heads over your skin in

circular movements to catch all hairs growing in

different directions. Make sure each shaving

head is fully in contact with the skin. Exert

gentle pressure for a close, comfortable shave.

Note: Rinse the shaving unit regularly to ensure

that it continues to glide smoothly over your

skin.

6 Dry your face.

7 Clean the appliance after use.

Note: Make sure you rinse all foam or shaving

gel off the appliance.

Using the click-on attachments

Note: Attach the click-on cleansing brush

attachment on the attachment base first, before

placing it on the appliance.

Removing or attaching click-on attachments

1 Make sure the appliance is switched off.

19

English

2 Pull the attachment straight off the appliance.

Note: Do not twist the attachment while you

pull it off the appliance.

3 Insert the lug of the attachment into the slot in

the top of the appliance. Then press down the

attachment to attach it to the appliance (‘click’).

Using the beard styler attachment with

comb

You can use the beard styler with the comb

attached to style your beard at one fixed setting,

but also at different length settings. You can also

use it to pre-trim any long hairs before shaving for

a more comfortable shave.

Note: The beard styler is only intended for

trimming facial hair. Do not use on areas below the

neck.

The length settings on the beard styler attachment

correspond to the remaining hair length after

cutting and range from 1 to 5mm (3/64 - 3/16in).

1 Attach the attachment to the appliance ('click').

2 Slide the comb straight into the guiding grooves

on both sides of the beard styler attachment

(‘click’).

20

English

La pagina sta caricando ...

Philips 9000 Series Manuale utente

Questo manuale è adatto anche per

Philips 9000 Series Manuale utente

in altre lingue

Documenti correlati

Altri documenti