StarTech com C2-H46-UC2-PD-KVM Guida utente

Marca: StarTech com

Modello: C2-H46-UC2-PD-KVM

Categoria: Switch KVM

Tipo: Guida utente

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: February 16, 2023 8:38 AM

Product ID

C2-H46-UC2-PD-KVM

Front

Rear

Top

2-Port Compact USB-C KVM Switch - HDMI - 4K 60Hz - 100W Power Delivery

Component Function

1Console USB HID Ports

• Connect a Human Interface Device (HID) (e.g.

Keyboard, Mouse, Trackpad, Number Keypad, or

Drawing Tablet)

• USB 2.0 (480Mbps)

2USB-C Host Ports

• Connect to a Computer with a USB-C Port

• For full functionality, the Host Computer’s

USB-C Port must support DP-Alt Mode and

Power Delivery

3USB-C Power Delivery

Pass-through Ports

• Connect a USB-C Power Adapter

• Supports up to 100W

4Console HDMI Output

Port • Connect to an HDMI Input on a Display

5Power Input LED

Indicators

• Solid Blue: USB-C Power Adapter connected

• O: USB-C Power Adapter not connected

6Port Selection Button • Press the Port Selection Button to switch

between PC 1 or PC 2

7Host Connection LED

Indicators

• Solid Blue: Port selected

• O: Port not selected

Product Information

For the latest manuals, product information, technical specications, and declarations of

conformance, please visit: www.StarTech.com/C2-H46-UC2-PD-KVM

Package Contents

• KVM Switch x 1

• USB-C Host Cable x 2

• Quick-Start Guide x 1

Requirements

Source PCs

• USB-C DisplayPort Alt-mode enabled Computer x 2

Console

• HDMI Display x 1

• HDMI Cable x 1

• USB Mouse x 1

• USB Keyboard x 1

1 2

Regulatory Compliance

FCC - Part 15

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could

void the user’s authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two

conditions:

(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may

cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation

est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique

subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

Warranty Information

This product is backed by a two-year warranty.

For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)

for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss

of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the

product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the

limitations or exclusions contained in this statement may not apply to you.

Safety Measures

If product has an exposed circuit board, do not touch the product under power.

Mesures de sécurité

Si l’un des circuits imprimés du produit est visible, ne pas touchez le produit lorsqu’il est sous tension.

安全対策

製品に露出した状態の回路基盤が含まれる場合、電源が入っている状態で製品に触らないでください。

Misure di sicurezza

Se il prodotto ha un circuito stampato visibile, non toccare il prodotto quando è acceso.

Säkerhetsåtgärder

Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es

NL: startech.com/nl

IT: startech.com/it

JP: startech.com/jp

StarTech.com

Ltd.

45 Artisans Cres

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Rd,

Brackmills

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

4490 South Hamilton

Road

Groveport, Ohio

43125

U.S.A.

StarTech.com Ltd.

Siriusdreef 17-27

2132 WT Hoofddorp

The Netherlands

Installation

Connect the Console

Note: Power o all Computers, Displays, and Peripherals before completing the following steps.

1. Connect an HDMI Cable (sold separately) from the Console HDMI Output Port,

located on the rear of the KVM Switch, to an HDMI Display.

2. Connect a USB Mouse and a USB Keyboard to the Console USB HID Ports, located

on the front of the KVM Switch.

3. (Optional) Connect a USB-C Power Adapter to the USB-C Power Delivery Pass-

through Port for PC 1, located on the rear of the KVM Switch.

Note: If a USB-C Power Adapter is not connected to the USB-C Power Delivery Pass-through

Port, the host will not charge through the KVM Switch connection.

4. (Optional) Repeat Step 3 for PC 2

Connect the PCs

1. Connect the included USB-C Host Cable from the PC 1 USB-C Host Port, located on the front

of the KVM Switch, to an available USB-C Port on PC 1.

Note: For full functionality the Host Computer USB-C Port must support DP-Alt Mode and Power

Delivery

2. Connect the included USB-C Host Cable from the PC 2 USB-C Host Port, located on the front

of the KVM Switch, to an available USB-C Port on PC 2.

Operation

Push Button Operation

Press the Push Button Selector to switch between PC 1 and PC 2

StarTech com C2-H46-UC2-PD-KVM Guida utente

Marca: StarTech com

Modello: C2-H46-UC2-PD-KVM

Categoria: Switch KVM

Tipo: Guida utente

Scarica il pdf

rapporto

in altre lingue

English: StarTech com C2-H46-UC2-PD-KVM User guide

StarTech com C2-H46-UC2-PD-KVM Guida utente

StarTech com C2-H46-UC2-PD-KVM Guida utente

in altre lingue

Documenti correlati

Altri documenti