CipherLab Q3N-RS50 Manuale utente

Marca: CipherLab

Modello: Q3N-RS50

Categoria: Computer portatili palmari

Tipo: Manuale utente

Questo manuale è adatto anche per

RS50

RS50

Mobile Computer

(Android™ 6.0, Marshmallow)

Version 1.00

- 2 -

Preface

PREFACE

The information contained in this document, including all pictures, illustrations and software,

is the proprietary information of CIPHERLAB CO., LTD. and its respective legal owners; it is

protected by copyright laws and international copyright treaties, as well as other intellectual

In no event and by no part shall this document be reproduced, stored in a retrieval system,

or transmitted in any form or by any means including but not limited to electronic,

mechanical, photocopying, and recording without the prior written consent of CIPHERLAB

CO., LTD. Any reverse engineering of software is also prohibited.

DISCLAIMER

The information herein is subject to change without notice. The information and the

intellectual property herein are confidential between you and CIPHERLAB CO., LTD. and

remain the exclusive property of CIPHERLAB CO., LTD. and its respective legal owners.

Should you find any problems in this document, please report them to CIPHERLAB in writing.

CIPHERLAB does not warrant this document is error-free.

TRADEMARK RECOGNITION

CipherLab logo is a registered trademark of CIPHERLAB CO., LTD. All other brands, products

and services, and trademark names are the property of their registered owners. The

editorial use of these names is for identification as well as to the benefit of the owners, with

no intention of infringement.

Google, Google Play, Android and other marks are trademarks of Google Inc.

CONTACT

For product consultancy and technical support, please contact CIPHERLAB’s sales

representative in your local area. You may also visit CIPHERLAB web site for more

information.

CIPHERLAB CO., LTD.

Website: http://www.CipherLab.com

- 3 -

Important Notices

IMPORTANT NOTICES

FOR USA

FCC ID : Q3N-RS50

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communication. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and receiver.

 Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

 Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

FCC Caution:

Any changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate this equipment.

This transmitter must not be co-located or operating in conjunction with any other

antenna or transmitter.

Find the certificate information from :

Setup



About Phone



Certificate

Tested to Comply

with FCC Standards

FOR HOME OR OFFICE USE

- 4 -

Important Notices

FOR PRODUCT WITH LASER

 This laser component emits FDA / IEC Class 2 laser light at

the exit port. Do NOT STARE INTO BEAM DIRECTLY.

 Do not aim the beam at the eyes.

 Any adjustments or performance excluding those specified may

result in hazardous laser light exposure.

ENVIRONMENT

 Operate the handy terminal at ambient temperatures from -20 °C to 50 °C

and with humidity range from 10% to 90%.

 Store the device at ambient temperatures from -30 °C to 70 °C and with

humidity range from 5% to 95%.

 Charge the device at ambient temperatures from 0°C to 35°C.

 This device is built with a dust-proof and splash-proof structure that

conforms to protection class IP67.

SPECIFIC ABSORPTION RATE (SAR) INFORMATION

The product complies with the FCC portable RF exposure limit set forth for an uncontrolled

environment and are safe for intended operation as described in this manual. The further RF

exposure reduction can be achieved if the products can be kept as far as possible from the

user body or set the device to lower output power if such function is available.

The SAR test distance is Head (0 mm), Body (10 mm) and Hotspot (10 mm).

For body-worn operating conditions please use belt-clips, holsters, and/or accessories

that have no metallic component in the assembly and must provide at least 10mm

separation between the device and the user's body.

FCC SAR Value (Standard limit is 1.6 W/Kg)

USA (1g): Max. 1.54 W/Kg

A minimum separation distance of 0.5 cm must be maintained between the user’s body and the

device, including the antenna during body-worn operation to comply with the RF exposure

requirements in Europe.

To compliance with RF Exposure requirements in Europe, third-party belt-clips, holsters or similar

accessories used by this device should not contain any metallic components. The use of accessories

that do not satisfy these requirements may not comply with RF exposure requirements, and should be

avoided.

CE SAR Value (Standard limit is 2 W/Kg)

EU (10g): Max. 1.6 W/Kg

SAFETY PRECAUTIONS

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.

DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

 For people’s safety

 Do not listen at high volume levels for long periods to prevent possible

hearing damage.

 Do not operate this device while walking, cycling or car driving.

 For the equipment

- 5 -

Important Notices

 Do not use any batteries or charging devices which are not originally sold

 Do not replace the battery with an incorrect type, to avoid the risk of heat

generation, fire, or explosion.

 Do not disassemble, incinerate or short circuit the battery.

 Do not touch the contact pins of the battery pack.

 Do not expose the handy terminal or battery to any flammable sources.

 Do not expose the handy terminal to extreme temperatures or soak it in

water.

 Do not use any pointed or sharp objects against the screen surface.

 Do not use the styluses which are not supplied, to prevent possible scratches

to the touch screen.

 Water residue on the touch screen may cause abnormal behaviors or the fall

of its sensitivity levels.

 On the surface of the terminal and the barcode reading window, the fog or

water drops caused by low temperatures may influence barcode reading.

 Do not use bleaches or cleaners to clean the device. Use a clean, wet cloth

instead.

BATTERY

 The main battery may not be charged to full for shipment. Charge the main

battery to full before using the handy terminal for the first time.

 Main battery: The main battery powers the handy terminal to work. It takes

approximately 4 hours to charge an empty main battery to full. The charging LED

above the screen will light up in red while charging and will turn green when charging

is complete.

 When the main battery is removed, RTC retention will be maintained for at

least 30 minutes.

 Backup battery: The backup battery is mounted on the main board. Its role is

to temporarily keep the handy terminal in suspension when the main battery is drained

out so data in DRAM will be retained. The backup battery takes approximately 3.5

hours to charge to full by the main battery or power adapter.

 It is recommended to charge the battery at room temperature (18°C to 25°C)

for optimal performance.

 Battery charging stops when ambient temperature drops below 0°C or

exceeds 40°C.

 In order to prevent system from shutting down after the battery is drained

out, keep a fresh battery for replacement at all times, or connect the handy terminal to

an external power.

 If there are drippings or dust on the device or battery pack, wipe them away

with a soft clean cloth before battery replacement.

 Turn off the power before battery replacement.

 If you want to put away the handy terminal for a period of time, remove the

battery pack from the handy terminal’s battery compartment. Store the handy

terminal and battery pack separately.

 Recycle batteries in a proper way for the green-environment issue.

SCANNER

 Scan a 1D barcode

- 6 -

Important Notices

 1) Open ReaderConfig and tap Scan Test on the menu bar.

 2) Aim the scanning window at the barcode to read. Move the device,

having the barcode located in the center of the scanning area.

 3) Press any of the two side triggers. The scanning light beams to read the

printed barcodes. The buzzer beeps after scanning. The scanning light goes off once

the data is decoded, or when the decode timeout period has passed.

 Scan a 2D barcode

 1) Open ReaderConfig and tap Scan Test on the menu bar.

 2) Aim the scanning window at the barcode to read. Move the device,

having the barcode located in the center of the scanning area.

 3) Press any of the two side triggers. The scanning light beams to read the

printed barcodes. The buzzer beeps after scanning. The scanning light goes off once

the data is decoded, or when the decode timeout period has passed.

- 7 -

Important Notices

CONNECTION

 Via Bluetooth or WLAN

 Connection may fail when the handy terminal is around other wireless

machines or power cables as the radio frequencies of those may cause interferences.

 If communication fails, move the devices much closer to each other, and try

to communicate again

 After turning on, Bluetooth power is sustained even when the handy terminal

is suspended. However, if the power mode is switched to Airplane Mode, Bluetooth

power will be turned off regardless of the settings.

 Not Charging could be the result of battery damage, battery’s failure to touch

the connector or AC plug coming off.

 Charging error could be due to high battery temperature.

CARE & MAINTENANCE

 When the body of the handy terminal gets dirty, use a clean, wet cloth to

wipe off dust and debris. DO NOT use bleaches or cleaners.

 Use a clean, non-abrasive, lint-free cloth to wipe dust off the LCD touch

screen. DO NOT use any pointed or sharp objects against the surface. Always keep the

LCD dry.

 If you want to put away the handy terminal for a period of time, download the

collected data to a host computer, and then remove the battery pack from the handy

terminal’s battery compartment. Store the handy terminal and battery pack

separately.

 If you encounter malfunction on the handy terminal, write down the specific

scenario and consult your local sales representative.

- 8 -

Important Notices

USA E-LABEL

- 9 -

Important Notices

EUROPE - EU DECLARATION OF CONFORMITY

- 10 -

Important Notices

- 11 -

Important Notices

esky

[Czech]

CIPHERLAB CO. LTD tímto prohlašuje, že tento RS50

je ve shodě se základními požadavky a dalšími

příslušnými ustanoveními směrnice 1999/5/ES.

Dansk

[Danish]

Undertegnede CIPHERLAB CO. LTD

erklærer herved, at følgende udstyr RS50 overholder de væsentlige krav

og øvrige relevante krav i direktiv 1999/5/EF.

Deutsch

[German]

Hiermit erklärt CIPHERLAB CO. LTD, dass sich das Gerät RS50

in Übereinstimmung mit den grundlegenden

Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.

Eesti

[Estonian]

Käesolevaga kinnitab CIPHERLAB CO. LTD

seadme RS50 vastavust direktiivi 1999/5/EÜ põhinõuetele ja

nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.

English

Hereby, CIPHERLAB CO. LTD, declares that this

RS50

is in compliance with the essential requirements and

other relevant provisions of Directive 1999/5/EC.

Español

[Spanish]

Por medio de la presente CIPHERLAB CO. LTD

declara que el RS50

cumple con los requisitos esenciales y

cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.

Ελληνική

[Greek]

ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ CIPHERLAB CO. LTD

ΔΗΛΩΝΕΙ ΟΤΙ

RS50

ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ

ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.

Français

[French]

Par la présente

CIPHERLAB CO. LTD

déclare que l'appareil RS50

est conforme aux exigences essentielles et

aux autres dispositions pertinentes de la directive 1999/5/CE.

Italiano

[Italian]

Con la presente CIPHERLAB CO. LTD

dichiara che questo RS50

è conforme ai requisiti essenziali ed alle altre

disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.

Latviski

[Latvian]

Ar šo CIPHERLAB CO. LTD

deklarē, ka RS50

atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to

saistītajiem noteikumiem.

Lietuvių

[Lithuanian]

iuo CIPHERLAB CO. LTD deklaruoja, kad šis RS50

atitinka esminius reikalavimus ir kitas 1999/5/EB

Direktyvos nuostatas.

Nederlands

[Dutch]

Hierbij verklaart CIPHERLAB CO. LTD

dat het toestel RS50

in overeenstemming is met de essentiële eisen en

de andere relevante bepalingen van richtlijn 1999/5/EG.

Malti

[Maltese]

Hawnhekk, CIPHERLAB CO. LTD, jiddikjara li dan RS50

jikkonforma mal-ħtiġijiet essenzjali u ma

provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC.

Magyar

[Hungarian]

Alulírott,

CIPHERLAB CO. LT

nyilatkozom, hogy a

RS50

megfelel a vonatkozó alapvetõ követelményeknek és

az 1999/5/EC irányelv egyéb elõírásainak.

Polski

[Polish]

Niniejszym CIPHERLAB CO. LTD oświadcza, że RS50

jest zgodny z zasadniczymi wymogami oraz pozostałymi

stosownymi postanowieniami Dyrektywy 1999/5/EC.

Português

[Portuguese]

CIPHERLAB CO. LTD

declara que este

RS50

está conforme com os requisitos essenciais e outras disposições da

Directiva 1999/5/CE.

Slovensko

[Slovenian]

CIPHERLAB CO. LTD

izjavlja, da je ta RS50

v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili

direktive 1999/5/ES.

Slovensky

[Slovak]

CIPHERLAB CO. LTD týmto vyhlasuje, že RS50

ňa základné požiadavky a všetky príslušné ustanovenia

Smernice 1999/5/ES.

Suomi

[Finnish]

CIPHERLAB CO. LTD vakuuttaa täten että RS50

tyyppinen laite on direktiivin 1999/5/EY oleellisten

vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.

Svenska

[Swedish]

Härmed intygar CIPHERLAB CO. LTD

att denna RS50

står I överensstämmelse med de väsentliga

egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.

- 12 -

Release Notes

RELEASE NOTES

Version Date Notes

1.00a

Mar 23, 2016 2

release

1.00 Nov 10, 2016 Initial release

CONTENTS

PREFACE .......................................................................................................................................... - 2 -

Copyright ........................................................................................................................................ - 2 -

Disclaimer ...................................................................................................................................... - 2 -

Trademark Recognition ................................................................................................................. - 2 -

Contact ........................................................................................................................................... - 2 -

RELEASE NOTES ............................................................................................................................ - 12 -

CONTENTS ......................................................................................................................................... 13

INTRODUCTION .................................................................................................................................. 14

Inside the Package .......................................................................................................................... 14

Accessories ...................................................................................................................................... 14

QUICK START ..................................................................................................................................... 15

Overview ........................................................................................................................................... 15

Installing Battery ........................................................................................................................ 17

Installing SIM Card, SAM Card and Memory Card .................................................................... 19

1.1.1. Power On/Off Mobile Computer ........................................................................... 20

1.1.2. Homescreen Selection .......................................................................................... 21

1.1.3. Using Hardware Buttons ....................................................................................... 22

1.1.4. Connecting Headset .............................................................................................. 22

1.2. Charging & Communication .................................................................................. 23

1.2.1. Charge Mobile Computer ...................................................................................... 23

1.2.2. Wired Data Transmission ...................................................................................... 27

SPECIFICATIONS ................................................................................................................................ 28

Platform, Processor & Memory....................................................................................................... 28

Communication & Data Capture .................................................................................................... 28

Electrical Characteristics ................................................................................................................ 29

Physical Characteristics .................................................................................................................. 29

Environmental Characteristics ....................................................................................................... 30

Programming Support ..................................................................................................................... 31

Introduction

INTRODUCTION

The RS50 Mobile Computer, powered by Android™ 6.0, Marshmallow, is light-weight, easy

to use, and provides more powerful and handy tools.

Specifically designed to work as an industrial PDA, it provides rich options of data collection,

voice and data communication, long-lasting working hours, and so on. Its large color

transmissive display guarantees ease in reading in all lighting conditions. Integrated with

Bluetooth v4.1, v2.1+EDR and 802.11 a/b/g/n/ac technologies, the mobile computer also

includes a GSM/UMTS/LTE module to gain greater speeds and optimal mobility. In

particular, an integrated GNSS (Global Navigation Satellite System) receiver is made

available for use with third-party location-based applications.

This manual serves to guide you through how to install, configure, and operate the mobile

computer. The Care & Maintenance section is specifically crucial for those who are in charge

of taking care of the mobile computer.

We recommend you to keep one copy of the manual at hand for quick reference or

maintenance purposes. To avoid any improper disposal or operation, please read the

manual thoroughly before use.

INSIDE THE PACKAGE

The following items are included in the kit package. Save the box and packaging material

for future use in case you need to store or ship the mobile computer.

 RS50 Mobile Computer

 Rechargeable Li-ion battery pack

 Snap-on USB Charging & Communication Cable

 AC Power Adaptor

 Quick Guide

Quick Start

Chapter 1

QUICK START

OVERVIEW

Quick Start

No. Description No.

Description

1 Status LED 2 Proximity+ALS Sensor

3 Phone Receiver 4 Power Button

5 Side Key 6 Microphone

7 Charging & Communication Pins 8 Touchscreen

9 Scan Window

10 Headset Jack

12 Loudspeaker

13 Battery Latch

16 Battery (with Cover)

18 Camera Lens

11 Volume Buttons

15 NFC Detection Area

17 Camera Flash

19 Rear Microphone

Quick Start

INSTALLING BATTERY

For shipping and storage purposes, the mobile computer and the main battery are saved in

separate packages.

Note: Any improper handling may reduce the battery life.

To install the main battery:

1) Insert the main battery with the contact pins facing the lower end. Fix the lower edge of

the battery first.

2) Push the upper end in, the battery latch will click into place with a “click” sound

PORTANT CHARGING INFORMATION

Power Supply

Input: AC 100-240V, 50-60Hz; output: 5V/2A

CipherLab approved

Battery Pack

(Optional)

3.8V 4000mAH/3.8V 5300mAH (Standard/Extended)

rechargeable Li-ion CipherLab proprietary

Charging time

Approx. 5 hours/6 hours (Standard/Extended battery) via

adapter

Quick Start

REMOVE BATTERY

1) Press down the power key and tap “Power off” to shut down this device.

2) Slide the key latch Right, the battery will be unlocked with a “click” sound.

3) Lift the battery up from its upper end.

Quick Start

INSTALLING SIM CARD, SAM CARD AND MEMORY CARD

The RS50 Mobile Computer is equipped with two SIM card slots, one SAM card slot and one

memory card slot.

To insert the cards:

1) Remove the battery.

2) Inser your fingernail into the notch above the inner lid that protects the card sockets

chamber and lift it up.

3) After the chamber is revealed, insert SIM cards, the SAM card and the microSD card into

their respective sockets. Close and push back the hinged cover till a “click” sounds.

4) Replace the inner lid.

5) Replace the battery.

REMOVE CARDS

1) Remove the battery.

2) Remove the inner lid.

3) Unlock the card hinge cover and remove the card.

4) Replace the inner lid and the battery.

Quick Start

1.1.1. POWER ON/OFF MOBILE COMPUTER

POWE

R ON

To power on the mobile computer, press and hold the power button located on the

upper right side of the device.

Note:

For the mobile computer to power on, the battery cover must be secured in place.

Warning:

en powering on this mobile computer, if you

accidentally enter a hidden advanced boot menu,

please use Volume Up key to select and Volume

Down key to confirm [Normal Boot] to return to

the normal booting process.

Any system failure, data loss or unexpected con

equences arising from your entering the

other two options - [Recovery Mode] and [Factory Mode] is out of CIPHERLAB ’s

warranty coverage.

POWER OFF

To power off the mobile computer, press and hold the power button for more than three

seconds. A menu will appear on-screen which allows you to power off the device. Make sure

all user data and tasks have been stored before tapping on Power off.

La pagina si sta caricando...

CipherLab Q3N-RS50 Manuale utente

Marca: CipherLab

Modello: Q3N-RS50

Categoria: Computer portatili palmari

Tipo: Manuale utente

Questo manuale è adatto anche per

RS50

Scarica PDF

rapporto

in altre lingue

English: CipherLab Q3N-RS50 User manual

CipherLab Q3N-RS50 Manuale utente

Questo manuale è adatto anche per

CipherLab Q3N-RS50 Manuale utente

in altre lingue

Altri documenti