Datalogic Jet Manuale utente

Categoria
Computer portatili palmari
Tipo
Manuale utente
JET™
User’s Manual
Jet™
USER'S MANUAL
DATALOGIC S.p.A.
Via Candini 2
40012 - Lippo di Calderara di Reno
Bologna - Italy
Jet™ - User's Manual
Ed.: 02/2005
ALL RIGHTS RESERVED
Datalogic reserves the right to make modifications and improvements without prior notification.
Datalogic shall not be liable for technical or editorial errors or omissions contained herein, nor for incidental or
consequential damages resulting from the use of this material.
Product names mentioned herein are for identification purposes only and may be trademarks and or
registered trademarks of their respective companies.
© Datalogic S.p.A. 2004-2005
822000511 (Rev. A)
iii
CONTENTS
DATALOGIC END USER LICENSE AGREEMENT..................................... v
REFERENCES ........................................................................................... vii
Conventions.................................................................................................vii
Reference Documentation ...........................................................................vii
Service and Support ....................................................................................vii
SAFETY REGULATIONS.......................................................................... viii
General Safety Rules..................................................................................viii
Laser Safety..................................................................................................ix
Radio Compliance........................................................................................xii
Information for the User ..............................................................................xiii
GENERAL VIEW ....................................................................................... xiv
1 INTRODUCTION .......................................................................................... 1
1.1 Jet™ PDA Description .................................................................................. 1
1.2 Available Models........................................................................................... 1
1.3 Package Contents......................................................................................... 2
1.4 Accessories................................................................................................... 3
2 CONNECTIONS ........................................................................................... 4
2.1 PDA Connection to the Host Computer......................................................... 4
2.1.1 RS232/USB Direct Connection ..................................................................... 4
2.1.2 WLAN Connection ........................................................................................ 5
2.1.3 WPAN Connections ...................................................................................... 6
2.1.4 WWAN Connections ..................................................................................... 7
2.2 Connection Cables...................................................................................... 10
3 USE AND FUNCTIONING.......................................................................... 11
3.1 PDA Startup................................................................................................ 11
3.2 Using the Stylus.......................................................................................... 12
3.3 Data Capture............................................................................................... 13
3.3.1 Laser Data Capture..................................................................................... 13
3.3.2 Imager Data Capture................................................................................... 14
3.3.3 RFID Data Capture ..................................................................................... 15
3.4 Description of the Keys ............................................................................... 16
3.4.1 System Control and Navigation Keys.......................................................... 16
3.4.2 Key Selection.............................................................................................. 17
3.5 STATUS Indicators ..................................................................................... 20
3.5.1 LED Status.................................................................................................. 20
3.5.2 Status Bar ................................................................................................... 21
iv
3.6
Data Capture Configuration ........................................................................ 22
3.6.1 Configure .................................................................................................... 22
3.6.2 Capture ....................................................................................................... 26
3.7 Control Panel .............................................................................................. 27
3.7.1 Buttons........................................................................................................ 28
3.7.2 Registry....................................................................................................... 28
3.7.3 Files Admin ................................................................................................. 29
3.7.4 Wireless Communications........................................................................... 31
3.7.5 Bluetooth® Manager Device Setup............................................................. 32
3.8 Windows Connections................................................................................. 34
3.8.1 Microsoft® ActiveSync® ............................................................................. 34
3.9 Backup Directory File Management............................................................ 36
4 MAINTENANCE ......................................................................................... 37
4.1 Charging the Battery pack........................................................................... 37
4.2 Replacing the Battery pack ......................................................................... 38
4.3 Cleaning the PDA ....................................................................................... 39
5 TECHNICAL FEATURES ........................................................................... 40
5.1 Technical Data............................................................................................ 40
5.2 Reading Diagrams ...................................................................................... 43
6 TEST CODES............................................................................................. 44
GLOSSARY................................................................................................ 47
INDEX......................................................................................................... 50
v
DATALOGIC END USER LICENSE AGREEMENT
BY DOWNLOADING OR INSTALLING THE SOFTWARE, OR BY USING DATALOGIC EQUIPMENT THAT
INCLUDES THIS SOFTWARE, YOU ARE CONSENTING TO BE BOUND BY THIS AGREEMENT. IF YOU
DO NOT AGREE TO ALL OF THE TERMS OF THIS AGREEMENT, THEN DO NOT DOWNLOAD, INSTALL,
USE THE SOFTWARE NOR DATALOGIC EQUIPMENT.
The following terms and conditions govern your use of the Software except to the extent that a particular program (a) is the
subject of a separate written agreement with Datalogic or (b) includes a separate “click-on” license agreement as part of the
installation and/or download process. Should a conflict arise between the provisions of the foregoing documents, the order of
precedence shall be (1) the written agreement, (2) the click-on agreement, and (3) this agreement (“Agreement”).
1. License. Subject to the terms and conditions of and except as otherwise provided in this Agreement, Datalogic S.p.A.
(“Datalogic”) and its suppliers grant to Customer (“Customer”) a nonexclusive and nontransferable license to use the specific
program modules, feature set(s) or feature(s) in object code form only as well as associated media, printed materials and
“online” or electronic documentation (the “Software”) for which Customer has paid, if required, the license fees. The Software is
licensed not sold. The license shall be subject to each of the following limitations:
Unless otherwise expressly provided in the documentation, Customer shall use the Software solely as embedded in, for
execution on, or (where the applicable documentation permits installation on non-Datalogic equipment) for
communication with Datalogic equipment owned or leased by Customer;
Customer’s use of the Software shall be limited to use on a single hardware chassis, on a single central processing unit,
as applicable, or use on such greater number of chassis or central processing units as Customer may have paid
Datalogic the required license fee; and
Customer’s use of the Software shall also be limited, as applicable and set forth in Customer’s purchase order or in
Datalogic’s product catalog, user documentation, or web site, to a maximum number of (a) seats (i.e. users with access
to the installed Software), (b) concurrent users, sessions, ports, and/or issued and outstanding IP addresses, and/or (c)
central processing unit cycles or instructions per second. Customer’s use of the Software shall also be limited by any
other restrictions set forth in Customer’s purchase order or in Datalogic’s product catalog, user documentation or web site
for the Software.
2. General Limitations. Except as otherwise expressly provided under this Agreement, Customer shall have no right, and
Customer specifically agrees not to (i) transfer, assign or sublicense its license rights to any other person, or use the Software
on unauthorized or secondhand Datalogic equipment, and any such attempted transfer, assignment or sublicense shall be void;
(ii) correct errors to or otherwise modify or adapt the Software or create derivative works based upon the Software, or to permit
third parties to do the same; or (iii) decompile, decrypt, reverse engineer, disassemble or otherwise reduce the Software to
human-readable form to gain access to trade secrets or confidential information in the Software. To the extent required by law,
at Customer's request, Datalogic shall provide Customer with the interface information needed to achieve interoperability
between the Software and another independently created program, upon payment of Datalogic's applicable fee. Customer shall
observe strict obligations of confidentiality with respect to such information.
3. Upgrades and Additional Copies. For purposes of this Agreement, “Software” shall include (and the terms and conditions of
this Agreement shall apply to) any upgrades, updates, bug fixes or modified versions (collectively, “Upgrades”) or backup copies
of the Software licensed or provided to Customer by Datalogic or an authorized distributor for which Customer has paid the
applicable license fees. Notwithstanding any other provision of this Agreement: (1) customer has no license or right to use any
such additional copies or upgrades unless customer, at the time of acquiring such copy or upgrade, already holds a valid license
to the original Software and has paid the applicable fee for the upgrade, if required; (2) use of upgrades is limited to Datalogic
equipment for which customer is the original end user, purchaser or lessee or who otherwise holds a valid license to use the
Software which is being upgraded; and (3) use of additional copies is limited to backup purposes only.
4. Proprietary Notices. Customer agrees to maintain and reproduce all copyright and other proprietary notices on all copies, in
any form, of the Software in the same form and manner that such copyright and other proprietary notices are included on the
Software. Except as expressly authorized in this Agreement, Customer shall not make any copies or duplicates or any Software
without the prior written permission of Datalogic. Customer may make such backup copies of the Software as may be necessary
for Customer’s lawful use, provided Customer affixes to such copies all copyright, confidentiality, and proprietary notices that
appear on the original.
5. Protection of Information. Customer agrees that aspects of the Software and associated documentation, including the
specific design and structure of individual programs, constitute trade secrets and/or copyrighted material of Datalogic. Customer
shall not disclose, provide, or otherwise make available such trade secrets or copyrighted material in any form to any third party
without the prior written consent of Datalogic. Customer shall implement reasonable security measures to protect such trade
secrets and copyrighted material. Software and documentation shall remain solely property of Datalogic.
vi
6. Limited Warranty. If Customer obtained the Software directly from Datalogic, then Datalogic warrants that during the
Warranty Period (as defined below): (i) the media on which the Software is furnished will be free of defects in materials and
workmanship under normal use; and (ii) the Software will substantially conform to its published specifications. The “Warranty
Period” means a period beginning on the date of Customer’s receipt of the Software and ending on the later of (a) ninety (90)
days from the date of initial shipment of the Software by Datalogic, or (b) the end of the minimum period required by the law of
the applicable jurisdiction. The limited warranties extend only to Customer as the original licensee. Customer's sole and
exclusive remedy and the entire liability of Datalogic and its suppliers under these limited warranties will be, at Datalogic’s sole
option, repair or replacement of the Software if reported (or, upon request, returned) to Datalogic. Except as expressly granted
in this Agreement, the Software is provided AS IS and with all faults. Datalogic does not warrant that the Software is error free
or that Customer will be able to operate the Software without problems or interruptions. In addition, due to the continual
development of new techniques for intruding upon and attacking networks, Datalogic does not warrant that the Software or any
equipment, system or network on which the Software is used will be free of vulnerability to intrusion or attack. This warranty
does not apply if the Software (a) is licensed for beta, evaluation, testing or demonstration purposes for which Datalogic does
not receive a license fee, (b) has been altered, except by Datalogic, (c) has not been installed, operated, repaired, or maintained
in accordance with instructions supplied by Datalogic, (d) has been subjected to abnormal physical or electrical stress, misuse,
negligence, or accident, or (e) is used in ultra hazardous activities. If Customer obtained the Software from a Datalogic reseller,
the terms of any warranty shall be as provided by such distributor, and Datalogic provides Customer no warranty with respect to
such Software. The Software may contain support for programs written in Java. Java technology is not fault tolerant and is not
designed, manufactured, or intended for use or resale as online control equipment in hazardous environments requiring fail-safe
performance, such as in the operation of nuclear facilities, aircraft navigation or communication systems, air traffic control, direct
life support machines, or weapons systems, in which the failure of Java technology could lead directly to death, personal injury,
or severe physical or environmental damage. Microsoft Inc. has contractually obligated Datalogic to make this disclaimer.
7. Disclaimer of Warranties. Except as specified in this warranty, all expressed or implied conditions, representations, and
warranties including, without limitation, any implied warranty or condition of merchantability, fitness for a particular purpose, non-
infringement, satisfactory quality or arising from a course of dealing, usage, or trade practice, are hereby excluded to the extent
allowed by applicable law. To the extent that an implied warranty cannot be excluded, such warranty is limited in duration to the
warranty period.
8. Disclaimer of Liabilities. In no event will Datalogic or its suppliers be liable for any lost revenue, profit, or data, or for
special, indirect, consequential, incidental, or punitive damages however caused and arising out of the use of or inability to use
the Software even if Datalogic has been advised of the possibility of such damages. In no event shall Datalogic or its suppliers'
liability to customer, whether in contract, tort (including negligence), or otherwise, exceed the price paid by customer. The
foregoing limitations shall apply even if the above-stated warranty fails of its essential purpose.
9. Term and Termination. This Agreement is effective until terminated. Customer may terminate this Agreement at any time by
destroying all copies of Software including any documentation. Customer’s license rights under this Agreement will terminate
immediately without notice from Datalogic if Customer fails to comply with any provision of this Agreement. Upon termination,
Customer must destroy all copies of Software in its possession or control.
10. Customer Records. Customer grants to Datalogic and its independent accountants the right to examine Customer’s books,
records and accounts during Customer’s normal business hours to verify compliance with this Agreement. In the event such
audit discloses non-compliance with this Agreement, Customer shall promptly pay to Datalogic the appropriate license fees.
11. General Provisions. This Agreement shall be governed by and construed in accordance with the laws of Italy. All
disputes arising out of or in connection with this Agreement will be subject to the exclusive jurisdiction of the
competent Court of the place where Datalogic has its registered office. If any portion hereof is found to be void or
unenforceable, the remaining provisions of this Agreement shall remain in full force and effect. Except as expressly
provided herein, this Agreement constitutes the entire agreement between the parties with respect to the license of the
Software and supercedes any conflicting or additional terms contained in the purchase order.
vii
REFERENCES
CONVENTIONS
This manual uses the following conventions:
“User” refers to anyone using a Jet™ PDA.
“PDA” and "Jet™" refer to Datalogic Jet™ PDA.
“You” refers to the System Administrator or Technical Support person using this
manual to install, configure, operate, maintain or troubleshoot a Jet™ PDA.
REFERENCE DOCUMENTATION
For further information regarding Jet™ refer to the SDK Help on-Line.
SERVICE AND SUPPORT
Datalogic provides several services as well as technical support through its website.
Log on to www.datalogic.com and click on the links
indicated for further information
including:
- PRODUCTS
Search through the links to arrive at your product page where you can download
specific Manuals and Software & Utilities including:
- DLSm@rtSet™ a Windows-based utility program which allows device
configuration using a PC. It provides RS232 interface configuration as well
as configuration barcode printing.
- SERVICES & SUPPORT
- Datalogic Services Warranty Extensions and Maintenance Agreements
- Authorised Repair Centres
- CONTACT US
E-mail form and listing of Datalogic Subsidiaries
viii
SAFETY REGULATIONS
NOTE
Read this manual carefully before performing any type of connection
to the Jet™ PDA.
The user is responsible for any damages caused by incorrect use of
the equipment or by inobservance of the indication supplied in this
manual.
GENERAL SAFETY RULES
Use only the components supplied by the manufacturer for the specific Jet™
PDA being used.
Do not attempt to disassemble the Jet™ PDA, as it does not contain parts that
can be repaired by the user. Any tampering will invalidate the warranty.
When replacing the battery pack or at the end of the operative life of the Jet™
PDA, disposal must be performed in compliance with the laws in force.
Do not submerge the Jet™ PDA in liquid products.
ix
LASER SAFETY
The laser light is visible to the human eye and is emitted from the window indicated in
the figure.
This information applies to both Laser models and the JET™ Imager Aiming System.
I D F E
La luce laser è visibile
all'occhio umano e
viene emessa dalla
finestra indicata nella
figura.
Die Laserstrahlung ist für
das menschliche Auge
sichtbar und wird am
Strahlaustrittsfenster
ausgesendet (siehe Bild).
Le rayon laser est visible
à l'oeil nu et il est émis
par la fenêtre désignée
sur l'illustration dans la
figure.
La luz láser es visible al
ojo humano y es emitida
por la ventana indicada
en la figura.
LUCE LASER
NON FISSARE IL FASCIO
APPARECCHIO LASER DI
CLASSE 2
MINIMA POTENZA DI
USCITA:
LUNGHEZZA D'ONDA
EMESSA:
CONFORME A EN 60825-1
(2001)
LASERSTRAHLUNG
NICHT IN DER STRAHL
BLINKEN
PRODUKT DER
LASERKLASSE 2
MAXIMALE
AUSGANGLEISTUNG:
WELLENLÄNGE:
ENTSPR. EN 60825-1
(2001)
RAYON LASER
EVITER DE REGARDER
LE RAYON
APPAREIL LASER DE
CLASSE 2
PUISSANCE DE SORTIE:
LONGUER D'ONDE EMISE:
CONFORME A EN 60825-1
(2001)
RAYO LÁSER
NO MIRAR FIJO EL RAYO
APARATO LÁSER DE
CLASE 2
MÁXIMA POTENCIA DE
SALIDA:
LONGITUD DE ONDA
EMITIDA:
CONFORME A EN 60825-1
(2001)
LASER LIGHT - DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
MAX. OUTPUT RADIATION 1.4 mW
EMITTED WAVELENGTH 630~680 nm
EN60825-1:2001
This product complies with
21 CFR Subchapter J
AVOID EXPOSURE
LASER LIGHT
IS EMITTED FROM
THIS APERTURE
CAUTION-CLASS 2 LASER LIGHT WHEN OPEN - DO NOT STARE INTO BEAM
Laser out
p
ut window
x
ENGLISH
The following information is provided to comply with the rules imposed by
international authorities and refers to the correct use of your PDA.
STANDARD LASER SAFETY REGULATIONS
This product conforms to the applicable requirements of both CDRH 21 CFR 1040
and EN 60825-1 at the date of manufacture.
For installation, use and maintenance, it is not necessary to open the device.
CAUTION
Use of controls or adjustments or performance of procedures other
than those specified herein may result in exposure to hazardous
visible laser light.
The product utilizes a low-power laser diode. Although staring directly at the laser
beam momentarily causes no known biological damage, avoid staring at the beam as
one would with any very strong light source, such as the sun. Avoid that the laser
beam hits the eye of an observer, even through reflective surfaces such as mirrors,
etc.
ITALIANO
Le seguenti informazioni vengono fornite dietro direttive delle autorità internazionali e
si riferiscono all’uso corretto del PDA.
NORMATIVE STANDARD PER LA SICUREZZA LASER
Questo prodotto risulta conforme alle normative vigenti sulla sicurezza laser alla data
di produzione: CDRH 21 CFR 1040 e EN 60825-1.
Non si rende mai necessario aprire l’apparecchio per motivi di installazione, utilizzo o
manutenzione.
ATTENZIONE
L'utilizzo di procedure o regolazioni differenti da quelle descritte
nella documentazione può provocare un'esposizione pericolosa
a luce laser visibile.
Il prodotto utilizza un diodo laser a bassa potenza. Sebbene non siano noti danni
riportati dall’occhio umano in seguito ad una esposizione di breve durata, evitare di
fissare il raggio laser così come si eviterebbe qualsiasi altra sorgente di luminosità
intensa, ad esempio il sole. Evitare inoltre di dirigere il raggio laser negli occhi di un
osservatore, anche attraverso superfici riflettenti come gli specchi.
xi
DEUTSCH
Die folgenden Informationen stimmen mit den Sicherheitshinweisen überein, die von
internationalen Behörden auferlegt wurden, und sie beziehen sich auf den korrekten
Gebrauch vom PDA.
NORM FÜR DIE LASERSICHERHEIT
Dies Produkt entspricht am Tag der Herstellung den gültigen EN 60825-1 und CDRH
21 CFR 1040 Normen für die Lasersicherheit.
Es ist nicht notwendig, das Gerät wegen Betrieb oder Installations-, und Wartungs-
arbeiten zu öffnen.
ACHTUNG
Jegliche Änderungen am Gerät sowie Vorgehensweisen, die nicht
in dieser Betriebsanleitung beschrieben werden, können ein
gefährliches Laserlicht verursachen.
Der Produkt benutzt eine Laserdiode. Obwohl zur Zeit keine Augenschäden von
kurzen Einstrahlungen bekannt sind, sollten Sie es vermeiden für längere Zeit in den
Laserstrahl zu schauen, genauso wenig wie in starke Lichtquellen (z.B. die Sonne).
Vermeiden Sie es, den Laserstrahl weder gegen die Augen eines Beobachters, noch
gegen reflektierende Oberflächen zu richten.
FRANÇAIS
Les informations suivantes sont fournies selon les règles fixées par les autorités
internationales et se refèrent à une correcte utilisation du PDA.
NORMES DE SECURITE LASER
Ce produit est conforme aux normes de sécurité laser en vigueur à sa date de
fabrication: CDRH 21 CFR 1040 et EN 60825-1.
Il n’est pas nécessaire d’ouvrir l’appareil pour l’installation, l’utilisation ou l’entretien.
ATTENTION
L'utilisation de procédures ou réglages différents de ceux donnés
ici peut entrainer une dangereuse exposition à lumière laser
visible.
Le produit utilise une diode laser. Aucun dommage aux yeux humains n’a été
constaté à la suite d’une exposition au rayon laser. Eviter de regarder fixement le
rayon, comme toute autre source lumineuse intense telle que le soleil. Eviter aussi
de diriger le rayon vers les yeux d’un observateur, même à travers des surfaces
réfléchissantes (miroirs, par exemple).
xii
ESPAÑOL
Las informaciones siguientes son presentadas en conformidad con las disposiciones
de las autoridades internacionales y se refieren al uso correcto del PDA.
NORMATIVAS ESTÁNDAR PARA LA SEGURIDAD LÁSER
Este aparato resulta conforme a las normativas vigentes de seguridad láser a la
fecha de producción: CDRH 21 CFR 1040 y EN 60825-1.
No es necesario abrir el aparato para la instalación, la utilización o la manutención.
ATENCIÓN
La utilización de procedimientos o regulaciones diferentes de
aquellas describidas en la documentción puede causar una
exposición peligrosa a la luz láser visible.
El aparato utiliza un diodo láser a baja potencia. No son notorios daños a los ojos
humanos a consecuencia de una exposición de corta duración. Eviten de mirar fijo el
rayo láser así como evitarían cualquiera otra fuente de luminosidad intensa, por
ejemplo el sol. Además, eviten de dirigir el rayo láser hacia los ojos de un
observador, también a través de superficies reflectantes como los espejos.
LED Illuminator
The use of an illuminator in the JET™ Imager is a Class 1 LED product:
Datalogic S.p.A. - Calderara di Reno (Bo) - Italy
IlIuminator Class 1 LED product
ILLUMINATORE LED CLASSE 1
AUSLEUCHTER LED KLASSE 1
ILLUMINATEUR A LED DE CLASSE 1
ILUMINADOR LED DE CLASE 1
RADIO COMPLIANCE
In radio systems configured with PDAs and access points, the frequencies to be used
must be allowed by the spectrum authorities of the specific country in which the
installation takes place. Be absolutely sure that the system frequencies are correctly
set to be compliant with the spectrum requirements of the country.
The Radio modules used in this product automatically adapt to the frequencies set by
the system and does not require any parameter settings.
xiii
The following shows the correspondence between the Jet™ models and the Radio
modules:
Jet™ 5XX-XXX 802.11b (Wi-Fi) radio card
Jet™ X1X-XXX GSM/GPRS Tri-band (900, 1800, 1900 MHz) module
Jet™ 51X-XXX 802.11b (Wi-Fi) radio card + GSM/GPRS Tri-band (900,
1800, 1900 MHz) module
INFORMATION FOR THE USER
ENGLISH
Contact the competent authority responsible for the management of radio frequency
devices of your country to verify the eventual necessity of a user license. Refer to the
web site http://europa.eu.int/comm/enterprise/rtte/spectr.htm
for further information.
ITALIANO
Prendi contatto con l'autorità competente per la gestione degli apparati a radio
frequenza del tuo paese, per verificarne l'eventuale necessità della licenza d'uso.
Inoltre puoi trovare ulteriori informazioni al sito:
http://europa.eu.int/comm/enterprise/rtte/spectr.htm
.
FRANÇAIS
Contactez l'autorité compétente en la gestion des appareils à radio fréquence de
votre pays pour vérifier la nécessité du permis d'usage. Pour tout renseignement
vous pouvez vous adresser au site web:
http://europa.eu.int/comm/enterprise/rtte/spectr.htm
.
DEUTSCH
Um die Notwendigkeit der Verwendungslizenz zu prüfen, wenden Sie sich an die
Behörde, die auf der Radiofrequenzgerätsführung Ihres Lands bewandert ist. Weitere
Informationen sind verfügbar auf dem Web Site:
http://europa.eu.int/comm/enterprise/rtte/spectr.htm
.
ESPAÑOL
Contacta con la autoridad competente para la gestión de los dispositivos de radio
frecuencia de tu país, para verificar si es necesario la licencia de uso. Además se
puede encontrar mas información en el sitio web:
http://europa.eu.int/comm/enterprise/rtte/spectr.htm
.
xiv
GENERAL VIEW
A) Data capture/Laser Output window
B) Scan Key(s) (3)
C) Bluetooth® LED
D) Charging status LED
E) Backlit keyboard
F) External Power Supply Connector
G) Communication/Charger Connector
H) Headset jack
I) User Programmable LED
J) Backlit display
K) Adjustable elastic strap with stylus
holder
L) Microphone
M) Latch release button
N) Battery latch
O) Battery pack
P) Speaker
Q) IrDA port
A
J
C
E
N
I
D
O
Q
K
P
L
F
G
H
M
B
INTRODUCTION
1
1
1 INTRODUCTION
1.1 JET™ PDA DESCRIPTION
Datalogic JET™ is a professional PDA that extends the power of enterprise
computing to all areas of supply chain management: from planning and production, to
warehousing and transportation. Datalogic’s PDA captures, computes and
communicates information anywhere and anytime, and offers the most versatile
business solution for any warehouse management system.
Key features include fully integrated automatic data capture (1D bar code, 1D bar
code & RFID HF-ISO tags, 1D & 2D bar codes & Image) and superior wireless
communication capabilities (Bluetooth®, Wi-Fi 802.11b, GSM/GPRS) as well as a
winning combination of unique Italian design, compact size, light weight, and great
ergonomics all in a sturdy outer casing.
Datalogic JET™ enables companies and organizations worldwide to make more
effective use of people and tools for receiving, storage, and shipping activities. For
example, extended mobility allows simultaneous real-time inventory management
and control of all stock movements to increase precision while minimizing operating
costs. Data on store shelves, inventory levels and storage bins is immediately
available to permit greater coordination and cut flow times.
Datalogic JET™ provides mobile professionals with the most relevant features
needed to operate in demanding environments: reliability, ruggedness, drop
resistance, long lasting batteries, flexible communication and efficient data capture.
1.2 AVAILABLE MODELS
The brand new Datalogic JET™ PDA can be equipped with several data capture
and data communication options: as a result it will be available in 12 different models.
JET™
2
1
1.3 PACKAGE CONTENTS
The Jet™ PDA package contains:
1 Jet™ PDA;
1 CD-ROM Datalogic-NET SDK (Windows CE.NET SDK for Datalogic terminals)
2 styluses
1 user’s manual
1 rechargeable battery pack;
1 adjustable elastic strap with stylus holder
1 belt clip
1 belt clip pivot
Any other packages will contain the accessories necessary for the Jet™ PDA
connection to the host computer and to the network: the cradle, power supply, and
one or more connection cables.
Remove all the components from their packaging, check their integrity and congruity
with the packing documents.
CAUTION
Keep the original packaging for use when sending products to the
technical assistance center. Damage caused by improper
packaging is not covered under the warranty.
NOTE
Rechargeable battery packs are not initially charged. Therefore the
first operation to perform is to charge them. See paragraph 4.1.
INTRODUCTION
3
1
1.4 ACCESSORIES
Cradles
94A151096 Jet™ Single Cradle Desk (includes slot for spare battery pack
recharge; RS232 and USB communications).
94A151097 Jet™ Single Cradle Vehicle.
Charger
94A151098 Jet™ Multi-Battery pack Charger (4 slots).
Batteries
94ACC1293 Jet™ Standard Battery pack (Li-Ion battery pack 1070 [email protected]
V).
94ACC1294 Jet™ Large Capacity Battery pack (Li-Ion battery pack 1800
Power Supply
94ACC1286 PG12-10P35 AC/DC Power Supply without cord for Datalogic Jet™.
94ACC1296 PG12-10P35 AC/DC Power supply EU KIT
94ACC1297 PG12-10P35 AC/DC Power supply UK KIT
94ACC1298 PG12-10P35 AC/DC Power supply US KIT
94ACC1299 PG12-10P35 AC/DC Power supply AUS KIT
94ACC4595 FPS18 Power Supply without cord for Jet™ Single Cradle Desk and
for Jet™ Multi-Battery Charger
94ACC1150 Power cord EU 3-pin
94ACC1160 Power cord AUS 3-pin
94ACC1170 Power cord USA 3-pin
94ACC1180 Power cord UK 3-pin
Cables
94A051008 WIN-NET SERIAL CABLE (HRS 3500-16P-CV) cable for RS232
direct connection between the PDA and the PC.
94A051009 WIN-NET USB CABLE (HRS 3500-16P-CV) cable for USB direct
connection between the PDA and the PC.
Various
94ACC1287 Jet™ Belt Holster.
94ACC1288 Jet™ Functional Case.
94ACC1300 Jet™ Backstrap Kit (2 pcs)
94ACC1301 Stylus Pen (20 pcs)
JET™
4
2
2 CONNECTIONS
2.1 PDA CONNECTION TO THE HOST COMPUTER
2.1.1 RS232/USB Direct Connection
You can use a cable to connect the Jet™ PDA to a host computer to transfer data.
A
D*
B
C
Key:
A Host computer C RS232 cable or USB cable
B Jet™ PDA D *Power Supply (only necessary for battery charging)
* Recommended Power Supply: PG12-10P35 AC/DC Power Supply
CAUTION
USB communication may not be completely guaranteed while
batteries are simultaneously in charge. Avoid the power supply
connection when the USB link is active.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69

Datalogic Jet Manuale utente

Categoria
Computer portatili palmari
Tipo
Manuale utente

in altre lingue