ESAB AristoTig 400 Manuale utente

Categoria
Sistema di saldatura
Tipo
Manuale utente

Questo manuale è adatto anche per

Valid for serial no. 050--xxx--xxxx, 105--xxx--xxxx,
347--xxx--xxxx, 445--xxx--xxxx, 524--xxx--xxxx
0458 640 027 060228
AristoTig 400
Instruction manual Èíñòðóêöèÿ ïî ýêñïëóàòàöèè
-- 2 --
Rights reserved to alter specifications without notice.
Îñòàâëÿåì çà ñîáîé ïðàâî èçìåíÿòü ñïåöèôèêàöèþ áåç ïðåäóïðåæäåíèÿ.
Ðóññêèé 3...............................................
ENGLISH 17..............................................
Ðóññêèé
TOCr
-- 3 --
1 ÒÅÕÍÈÊÀ ÁÅÇÎÏÀÑÍÎÑÒÈ 4........................................
2 ÂÂÅÄÅÍÈÅ 6.......................................................
2.1 Îáîðóäîâàíèå 6...........................................................
2.2 Ïàíåëü óïðàâëåíèÿ 6.......................................................
3 ÒÅÕÍÈ×ÅÑÊÈÅ ÕÀÐÀÊÒÅÐÈÑÒÈÊÈ 7................................
ÑÒÀÍÎÂÊÀ 8.......................................................
4.1 Èíñòðóêöèè ïî ïîäúåìó 9..................................................
4.2 Ðàçìåùåíèå 9.............................................................
4.3 Ýëåêòðîìîíòàæ àâòîòðàíñôîðìàòîðîì) 10................................
4.4 Ñåòü ýëåêòðîïèòàíèÿ 11.....................................................
5 ÏÎÐßÄÎÊ ÐÀÁÎÒÛ 12...............................................
5.1 Ñîåäèíåíèÿ è óñòðîéñòâà óïðàâëåíèÿ 12.....................................
5.2 Âêëþ÷åíèå èñòî÷íèêà ïèòàíèÿ 13............................................
5.3 Óïðàâëåíèå âåíòèëÿòîðàìè 13...............................................
5.4 Çàùèòà îò ïåðåãðåâà 13.....................................................
5.5 Áëîê îõëàæäåíèÿ 13........................................................
5.6 Ïóëüò äèñòàíöèîííîãî óïðàâëåíèÿ 14........................................
6 ÒÅÕÍÈ×ÅÑÊÎÅ ÎÁÑËÓÆÈÂÀÍÈÅ 14.................................
6.1 Î÷èñòêà âîçäóøíîãî ôèëüòðà 15.............................................
6.2 Ïîïîëíåíèå îõëàæäàþùåé æèäêîñòè 15.....................................
7 ÂÛßÂËÅÍÈÅ ÍÅÈÑÏÐÀÂÍÎÑÒÅÉ 15.................................
8 ÈÍÔÎÐÌÀÖÈß ÄËß ÇÀÊÀÇÀ ÇÀÏÀÑÍÛÕ ×ÀÑÒÅÉ 16.................
ÑÕÅÌÀ 30..............................................................
ÍÎÌÅÐ ÇÀÊÀÇÀ 33.....................................................
ÑÏÈÑÎÊ ÇÀÏÀÑÍÛÕ ×ÀÑÒÅÉ 34........................................
ÄÎÏÎËÍÈÒÅËÜÍÛÅ ÏÐÈÍÀÄËÅÆÍÎÑÒÈ 35...........................
bt23d0ra -- 4 --
1 ÒÅÕÍÈÊÀ ÁÅÇÎÏÀÑÍÎÑÒÈ
Ïîëüçîâàòåëè ñâàðî÷íîãî îáîðóäîâàíèÿ ESAB îòâå÷àþò çà âûïîëíåíèå ïðàâèë òåõíèê è
áåçîïàñíîñòè ëèöàìè, ðàáîòàþùèìè íà îáîðóäîâàíèè è ðÿäîì ñ íèì. Ïðàâèëà òåõíèêè
áåçîïàñíîñòè äîëæíû îòâå÷àòü òðåáîâàíèÿì ê áåçîïàñíîé ýêñïëóàòàöèè ñâàðî÷íîãî
îáîðóäîâàíèÿ ýòîãî òèïà. Ïîìèìî ñòàíäàðòíûõ ïðàâèë òåõíèêè áåçîïàñíîñòè è îõðàíû
òðóäà íà ðàá î÷åì ìåñòå ðåêîìåíäóåòñÿ ñëåäóþùåå.
Âñå ðàáîòû äîëæíû âûïîëíÿòüñÿ ïîäãîòîâëåííûìè ëèöàìè, çíàêîìûìè ñ ýêñïëóàòàöèåé
ñâàðî÷íîãî îáîðóäîâàíèÿ. Íåïðàâèëüíàÿ ýêñïëóàòàöèÿ îáîðóäîâàíèÿ ìîæåò âûçâàòü
îïàñíûì ñèòóàöèè, ïðèâîäÿùèå ê òðàâìèðîâàíèþ ïåðñîíàëà è ïîâðåæäåíèþ
îáîðóäîâàíèÿ.
1. Bñå ëèöà, èñïîëüçóþùèå ñâàðî÷íîå îáîðóäîâàíèå, äîëæíû çíàòü:
S èíñòðóêöèè ïî ýêñïëóàòàöèè
S ðàñïîëîæåíèå îðãàíîâ àâàðèéíîãî îñòàíîâà
S íàçíà÷åíèå îáîðóäîâàíèÿ
S ïðàâèëà òåõíèêè áåçîïàñíîñòè
S òåõíîëîãèþ ñâàðêè
2. Îïåðàòîð îáåñïå÷èâàåò:
S óäà ëåíèå ïîñòîðîííèõ ëèö èç ðàá î÷åé çîíû îáîðóäîâàíèÿ ïðè åãî çàïóñêå
S çàùèòó âñåõ ëèö îò â îçäåéñòâèÿ ñâàðî÷íîé äóãè
3. Ðàáî÷åå ìåñòî äîëæíî:
S îòâå÷àòü óñëîâèÿì ýêñïëóàòàöèè
S íå èìåòü ñêâîçíÿêîâ
4. Ñðåäñòâà çàùèòû ïåðñîíàëà
S Âî âñåõ ñëó÷àÿõ ðåêîìåíäóåòñÿ èñïîëüçîâàòü èíäèâèäóàëüíûå ñðåäñòâà çàùèòû,
íàïðèìåð, çàùèòíûå î÷êè, îãíåñòîéêóþ ñïåöîäåæäó è çàùèòíûå ðóêàâèöû.
S Ïðè ñâàðêå çàïðåùàåòñÿ íîñèòü ñâîáîäíóþ îäåæäó, óêðàøåíèÿ è ò.ä., íàïðèìåð,
øàðôû, áðàñëåòû, êîëüöà, êîòîðûå ìîãóò ïîïàñòü â ñâàðî÷íîå îáîðóäîâàíèå èëè
âûçâàò ü îæîãè.
5. Îáùèå ìåðû ïðåäîñòîðîæíîñòè
S Ïðîâåðüòå íàäåæíîñòü ïîäêëþ÷åíèÿ îáðàòíîãî êàáåëÿ.
S Ðàáîòû íà îáîðóäîâàíèè ñ âûñîêèì íàïðÿæåíèåì äîëæíû ïðîèçâîäèòüñÿ
òîëüêî êâàëèôèöèðîâàííûì ýëåêòðèêîì.
S Â ïðåäåëàõ äîñòóïà äîëæíû íàõîäèòüñÿ ñîîòâåòñòâóþùèå ñðåäñòâà
ïîæàðîòóøåíèÿ, èìåþùèå ÿñíóþ ìàðêèðîâêó.
S Çàïðåù àåòñÿ ïðîâîäèòü ñìàçêó è òåõíè÷åñêîå îáñëóæèâàíèå îáîðóäîâàíèå âî
âðåìÿ ýêñïëóàòàöèè.
RU
bt23d1ra -- 5 --
Ïåðåä íà÷àëîì ìîíòàæà è ýêñïëóàòàöèè âíèìàòåëüíî èçó÷èòå ñîîòâåòñòâóþùèå èíñòðóêöèè.
ÇÀÙÈÒÈÒÅ ÑÅÁß È ÄÐÓÃÈÕ!
ÎÑ ÒÎÐÎÆÍÎ!
ÄÓÃÎÂÀß ÑÂÀÐÊÀ È ÐÅÇÊÀ ÎÏÀÑÍÛ ÊÀÊ ÄËß ÈÑÏÎËÍÈÒÅËß ÐÀÁÎÒ, ÒÀÊ È ÄËß
ÏÎÑÒ ÎÐÎÍÍÈÕ ËÈÖ. ÒÐÅÁÓÉÒÅ ÑÎÁËÞÄÅÍÈÅ
ÂÑÅÕ ÏÐÀÂÈË ÁÅÇÎÏÀÑÍÎÑÒÈ,
ÄÅÉÑÒ
ÂÓÞÙÈÕ ÍÀ ÎÁÚÅÊÒÅ, ÊÎÒÎÐÛÅ ÄÎËÆÍÛ Ó×ÈÒÛÂÀÒÜ ÑÂÅÄÅÍÈß ÎÁ ÎÏÀÑÍÎÑÒßÕ,
ÏÐÅÄÑÒÀ
ÂËÅÍÍÛÅ ÈÇÃÎÒÎÂÈÒÅËÅÌ ÑÂÀÐÎ×ÍÎÃÎ ÎÁÎÐÓÄ ÎÂÀÍÈß.
ÎÏÀÑÍÎÑÒÜ ÑÌÅÐÒÅËÜÍÎÃÎ ÏÎÐÀÆÅÍÈß ÝËÅÊÒÐÈ×ÅÑÊÈÌ ÒÎÊÎÌ.
S Ñâàðî÷íûé àãðåãàò óñòàíàâëèâàåòñÿ è çàçåìëÿåòñÿ â ñîîòâåòñòâèè ñ äåéñòâóþùèìè íîðìàìè è
ïðàâèëàìè.
S Íå äîïóñêàéòå ê îíò àêòà íàõîäÿùèõñ ÿ ïîä íàïðÿæåíèåì äåòàëåé è ýëåêòðîäîâ ñ íåçàùèùåííûìè
÷àñòÿìèòåëàîêðûìèðóêàâèöàìèèìîêðîéîäåæäîé.
S Îáåñïå÷üòå ýëåêòðè÷åñêóþ èçîëÿöèþ îò çåìëè è ñâàðèâàåìûõ äåòàëåé.
S Îáåñïå÷üòå ñîáëþäåíèå áåçîïàñíûõ ðàáî÷èõ ðàññò îÿíèé.
ÄÛÌÛ È ÃÀÇÛ ìîãóò áûòü îïàñíû äëÿ ÷åëîâåêà
S Èñêëþ÷èòå âîçìî æíîñòü âîçäåéñòâèÿ äûìîâ.
S Äëÿ èñêëþ÷åíèÿ âäûõàíèÿ äûìîâ âî âðåìÿ ñâàðêè îðãàíèçóåòñÿ îáùàÿ âåíòèëÿöèÿ ïîìåùåíèÿ, à
òàêæåâûòÿæíàÿâåíòèëÿöèÿèççîíûñâàðêè.
ÈÇËÓ×ÅÍÈÅ ÄÓÃÈ âûçûâàåò ïîðàæ åíèå ãëàç è îæîãè êîæè.
S Çàùèòèòå ãëàçà è êîæó. Äëÿ ýòîãî èñïîëüçóéòå çàùèòíûå ùèòêè, öâåòíûå ëèíçû è çàùèòíóþ
ñïåöîäåæäó.
S Äëÿ çàùèòû ïîñò îðîííèõ ëèö ïðèìåíÿþòñÿ çàùèòíûå ýêðàíû èëè çàíàâåñè.
ÏÎÆÀÐÎÎÏÀÑÍÎÑÒÜ
S Èñêðû (áðûçãè ìåòàëëà) ìîãóò âûçâàòü ïîæàð. Óáåäèòåñü â îòñóòñòâèè ãîðþ÷èõ ìàòåðèàëîâ
ïîáëèçîñòè îò ìåñòà ñâàðêè.
ØÓÌ - ×ðåçìåðíûé øóì ìîæåò ïðèâåñòè ê ïîâðåæäåíèþ îðãàíîâ ñëóõà
S Ïðèìèòå ìåðû äëÿ çàùèòû ñëóõà. Èñïîëüçóéòå çàòû÷êè äëÿ óøåé èëè äðóãèå ñðåäñòâà çàùèòû
ñëóõà.
S Ïðåäóïðåäèòå ïîñòîðîííèõ ëèö îá îïàñíîñòè.
ÍÅÈÑÏÐÀÂÍÎÑÒÈ -- Ïðè íåèñïðàâíîñòè îáðàòèòåñü ê ñïåöèàëèñòàì ïî ñâàðî÷íîìó
îáîðóäîâàíèþ
Êîìïàíèÿ ESAB ãîòîâà ïðåäîñòàâèòü âàì âñå çàùèòíîå ñíàðÿæåíèå è
ïðèíàäëåæíîñòè, íå îáõîäèìûå äëÿ âûïîëíåíèÿ ñâàðî÷íûõ ð àáîò.
Çàïðåùàåòñÿ èñïîëüçîâàòü èñòî÷íèê ïèòàíèÿ äëÿ îòòàèâàíèÿ ò ðóá.
ÂÍÈÌÀÍÈÅ!
ÂÍÈÌÀÍÈÅ!
Ïåðåä íà÷àëîì ìîíòàæà è ýêñïëóàòàöèè âíèìàòåëüíî
èçó÷èòå ñîîòâåòñòâóþùèå èíñòðóêöèè.
Âíèìàíèå!
Ýòî óñòðîéñòâî ïðåäíàçíà÷åíî èñêëþ÷èòåëüíî äëÿ ýëåêòðîäóãîâîé ñâàðêè!
RU
bt23d1ra -- 6 --
2 ÂÂÅÄÅÍÈÅ
Áëîê AristoTig 400 ïðåäñòàâëÿåò ñîáîé èñòî÷íèê ïèòàíèÿ ä ëÿ äóãîâîé ñâàðêè
âîëüôðàìîâûì ýëåêòðîäîì â çàùèòíîì çàãå (TIG), êîòîðûé ìîæíî òàêæå
èñïîëüçîâàòü äëÿ ñâàðêè MMA .
Ïîñòàâëÿþòñÿ âîñåìü âàðèàíòîâ ýòîãî èñòî÷íèêà ïèòàíèÿ:
S AristoTig 400 ñ ïàíåëüþ óïðàâëåíèÿ T4
S AristoTig 400 ñ ïàíåëüþ óïðàâëåíèÿ T6
S AristoTig 400 ñ áëîêîì îõëàæäåíèÿ è ïàíåëüþ óïðàâëåíèÿ T4
S AristoTig 400 ñ áëîêîì îõëàæäåíèÿ è ïàíåëüþ óïðàâëåíèÿ T6
S AristoTig 400 ñ àâòîòðàíñôîðìàòîðîì è ï àíåëüþ óïðàâëåíèÿ T4
S AristoTig 400 ñ àâòîòðàíñôîðìàòîðîì è ï àíåëüþ óïðàâëåíèÿ T6
S AristoTig 400 ñ áëîêîì îõëàæäåíèÿ, àâòîòðàíñôîðìàòîðîì è ï àíåëüþ
óïðàâëåíèÿ T4
S AristoTig 400 ñ áëîêîì îõëàæäåíèÿ, àâòîòðàíñôîðìàòîðîì è ï àíåëüþ
óïðàâëåíèÿ T6
Ïðèìå÷àíèå:  íàñòîÿùåé èíñòðóêöèè îïèñàí èñòî÷íèê ïèòàíèÿ AristoTig 400
ñ áëîêîì îõëàæäåíèÿ è àâòîòðàíñôîðìàòîðîì.
Àêñåññóàð² îò ä ëÿ èçäåëÿ ìîæíî íàéòè íà ñòðíèöå 35.
2.1 Îáîðóäîâàíèå
 êîìïëåêòå ñ áëîêîì AristoTig 400 ïîñòàâëÿþòñÿ èíñòðóêöèè 5 m îáðàòíîãî
êàáåëÿ, íà èñòî÷íèê ïèòàíèÿ è îäíà èíñòðóêöèÿ íà ïàíåëü óïðàâëåíèÿ.
2.2 Ïàíåëü óïðàâëåíèÿ
Èñòî÷íèê ïèòàíèÿ ïîñòàâëÿåòñÿ â êîìïëåêòå ñ îäíîé èç ñëåäóþùèõ ïàíåëåé
óïðàâëåíèÿ:
S Ïàíåëü T4
Ñ ðó÷êîé äëÿ ðåãóëèðîâêè òîêà. Äðóãèå ïàðàìåòðû ðåãóëèðóþòñÿ ñ
ïîìîùüþ êíîïîê ñ ñèìâîëàìè íà ïàíåëè äèñïëåÿ.
S Ïàíåëü T6
Ñ ðó÷êîé äëÿ ðåãóëèðîâêè òîêà. Äðóãèå ïàðàìåòðû ðåãóëèðóþòñÿ ñ
ïîìîùüþ êíîïîê ñ òåêñòîì íà ïàíåëè äèñïëåÿ. Ïîäðîáíûå ñâåäåíèÿ î
ïàíåëÿõ óïðàâëåíèÿ ïðèâåäåíû â îòäåëüíûõ èíñòðóêöèÿõ.
RU
bt23d1ra -- 7 --
3 ÒÅÕÍÈ×ÅÑÊÈÅ ÕÀÐÀÊÒÅÐÈÑÒÈÊÈ
AristoTig 400
áåç ïåðåêëþ÷åíèÿ
AristoTig 400
ñ ïåðåêëþ÷åíèåì
Íàïðÿæåíèå ñåòè ïèòàíèÿ 400 Â, 0%, 3 50 Ãö 208/230/400/460/475/500/575 Â,
10%, 3 50/60 Ãö
Ïåðâè÷íûé òîêI
ìàêñ. T
IG
Ïåðâè÷íûé òîê I
ìàêñ.
MMA
29 À
38 À
50/44/29/23/23/20/15 À
65/57/38/30/30/20/20 À
Ïîòðåáëÿåìàÿ ìîùíîñòü
õîëîñòîãî õîäà â ðåæèìå
ýíåðãîñáåðåæåíèÿ, 6,5 ìèí
ïîñëå ñâàðêè
60 Âò 235 Âò
Äèàïàçîí íàïðÿæåíèÿ/òîêà
TIG
Äèàïàçîí íàïðÿæåíèÿ/òîêà
MMA
8-60 Â / 4-400 A
16 - 400 A
8-60 Â / 4-400 A
16 - 400 A
Äîïóñòèìàÿ íàãðóçêà ïðè
äóãîâîé ñâàðêå
âîëüôðàìîâûì ýëåêòðîäîì
êîýôôèöèåíò íàãðóçêè 35%
êîýôôèöèåíò íàãðóçêè 60%
êîýôôèöèåíò íàãðóçêè 100%
400 A / 26 Â
320 A / 23 Â
250 A / 20 Â
400 A / 26 Â
320 A / 23 Â
250 A / 20 Â
Äîïóñòèìàÿ íàãðóçêà ïðè
MMA
êîýôôèöèåíò íàãðóçêè 35%
êîýôôèöèåíò íàãðóçêè 60%
êîýôôèöèåíò íàãðóçêè 100%
400 A / 36 Â
320 A / 33 Â
250 A / 30 Â
400 A / 36 Â
320 A / 33 Â
250 A / 30 Â
Êîýôôèöèåíò ìîùíîñòè ïðè
ìàêñèìàëüíîì òîêå
0,65 0,65
Êïä ïðè ìàêñèìàëüíîì òîêå 85 % 85 %
Íàïðÿæåíèå õîëîñòîãî õîäà 78 - 90 Â 78 - 90 Â
Ðàáî÷èé òåìïåðàòóðíûé
äèàïàçîí
îò -10 äî + 40˚C îò -10 äî + 40˚C
Ãàáàðèòíûå ðàçìåðû, ÄxØ
ñ á ëîêîì îõëàæäåíèÿ
625 x 394 x 496
625 x 394 x 776
625 x 394 x 776
625 x 394 x 1056
Íåïðåðûâíî äåéñòâóþùåå
ñðåäíåå âçâåøåííî å
çâóêîâîå äàâëåíèå
<70 äÁ <70 äÁ
Ìàññà
ñ á ëîêîì îõëàæäåíèÿ
59 êã
79 êã
116 ê ã
136 êã
Êëàññ èçîëÿöèè H H
Ê ëàññ çàùèòû êîðïóñà IP 23 IP 23
Êëàññ ïðèìåíåíèÿ
Áëîê îõëàæäåíèÿ
Ìîùíîñòü îõëàæäåíèÿ 2500 Âò ïðè ðàçíèöå òåìïåðàòóð 40˚
ðàñõîäå 1,5 ë/ìèí
Îõëàæäàþùàÿ æèäêîñòü 50% âîäà / 50% ãëèêîëü
Êîëè÷åñòâî æèäêîñòè 5,5 ë
RU
bt23d1ra -- 8 --
Áëîê îõëàæäåíèÿ
Ìàêñèìàëüíûé ðàñõîä âîäû 2,0 ë/ìèí
Ìàêñèìàëüíîå êîëè÷åñòâî ñâàðî÷íûõ
ïèñòîëåòîâ / ãîðåëîê ñ âîäÿíûì
îõëàæäåíèåì, êîòîðîå ìîæåò áûòü
ïîäñîåäèíåíî
äâà ñâàðî÷íûõ ïèñòîëåòà MIG óãîâàÿ
ñâàðêà ïëàâÿùèìñÿ ìåòà ëëè÷åñêèì
ýëåêòðîäîì â ñðåäå èíåðòíîãî ãàçà) èëè
îäíà ñâàðî÷íàÿ ãîðåëêà TIG (äóãîâàÿ ñâàðêà
âîëüôðàìîâûì ýëåêòðîäîì â ñðåäå
èíåðòíîãî ãàçà) è îäèí ñâàðî÷íûé ïèñòîëåò
MIG
Ðàáî÷èé öèêë
Ðàáî÷èé öèêë ïðåäñòàâëÿåò ñîáîé äîëþ %%) äåñÿòèìèíóòíîãî èíòåðâàëà, â òå÷åíèå
êîòîðîé ìîæíî ïðîèçâîäèòü ñâàðêó ïðè îïðåäåëåííîé íàãðóçêå áåç ïåðåãðóçêè.
Ðàáî÷èéöèêëóêàçàíäëÿòåìïåðàòóðû40˚C.
Êëàññ êîæóõà
Íîðìû IP óêàçûâàþò êëàññ êîæóõà, ò.å., ñòåïåíü çàùèòû îò ïðîíèêíîâåíèÿ òâåðäûõ
îáúåêòîâ è âîäû. Îáîðóäîâàíèå ñ ìàðêèðîâêîé IP 23 ïðåäíàçíà÷åíî äëÿ íàðóæíîé è
âíóòðåííåé óñòàíîâêè.
Ê ëàññ çîíû óñòàíîâêè
Ýòîò ñèìâîë îçíà÷àåò, ÷òî èñòî÷íèê ïèòàíèÿ ïðåäíàçíà÷åí äëÿ èñïîëüçîâàíèÿ â çîíàõ
ñ ïîâûøåííîé îïàñíîñòüþ ïîðàæåíèÿ ýëåêòðî òîê îì.
ÑÒÀÍÎÂÊÀ
Ââîä â ýêñïëóàòàöèþ äîëæåí ïðîèçâîäèòüñÿ êâàëèôèöèðîâàííûì
ñïåöèàëèñòîì.
ÂÍÈÌÀÍÈÅ!
Íàñòîÿùåå èçäåëèå ïðåäíàçíà÷åíî äëÿ ïðîìûøëåííîãî èñïîëüçîâàíèÿ. Ïðè
èñïîëüçîâàíèè â áûòîâûõ óñëîâèÿõ îíî ìîæåò ñîçäàâàòü ðàäèî÷àñòîòíûå ïîìåõè.
Ïîëüçîâàòåëü îòâå÷àåò çà ïðèíÿòèå ñîîòâåòñòâóþùèõ ìåð ïðåäîñòîðîæíîñòè.
Âíèìàíèå!
Ïðèñîåäèíèòü èñòî÷íèê ïèòàíèÿ ê ýëåêòðè÷åñêîé ñåòè ñ ïîëíûì ñîïðîòèâëåíèåì 0.200 Îì
èëè íèæå. Åñëè ïîëíîå ñîïðîòèâëåíèå ñåòè âûøå, âîçíèêàåò ðèñê ìèãàíèÿ îñâåòèòåëüíûõ
ïðèáîðîâ.
RU
bt23d1ra -- 9 --
4.1 Èíñòðóêöèè ïî ïîäúåìó
Ñ èñòî÷íèêîì ïèòàíèÿ Ñ òåëåæêîé è èñòî÷íèêîì
ïèòàíèÿ
Ñòåëåæêîé2èèñòî÷íèêîì
ïèòàíèÿ
4.2 Ðàçìåùåíèå
Ðàçìåñòèòå ñâàðî÷íûé èñòî÷íèê ïèòàíèÿ òàêèì îáðàçîì, ÷òîáû åãî
âîçäóõîçàáîðíûå è âûïóñêíûå îòâåðñòèÿ íå áûëè çàãðàæäåíû.
RU
bt23d1ra -- 1 0 --
4.3 Ýëåêòðîìîíòàæ àâòîòðàíñôîðìàòîðîì)
RU
bt23d1ra -- 1 1 --
4.4 Ñåòü ýëåêòðîïèòàíèÿ
Óáåäèò åñü â òîì, ÷ò î áëîê ïîäêëþ÷åí ê ñåòè
ýëåêòðîïèòàíèÿ ñ òðåáóåìûì íàïðÿæåíèåì è çàùèùåí
ïðåäîõðàíèòåëÿìè òðåáóåìîãî íîìèíàëà. Íåîáõîäèìî
îáåñïå÷èòü çàùèòíîå çàçåìëåíèå â ñîîòâåò ñòâèè ñ
äåéñòâóþùèìè íîðìàìè.
Ïàñïîðòíàÿ òàáëè÷êà ñ ïàðàìåòðàìè ñåòè ýëåêòðîïèòàíèÿ.
Ðåêîìåíäóåìûå íîìèíàëû ïðåäîõðàíèòåëåé è ìèíèìàëüíàÿ ïëîùàäü
ïîïåðå÷íîãî ñå÷åíèÿ êàáåëåé
AristoTig 400 60 Ãö 50/60 Ãö 50 Ãö 60 Ãö 60 Ãö 50 Ãö 60 Ãö
Íàïðÿæåíèå ñåòè ïèòàíèÿ 208 Â 230 Â 400 Â 460 Â 475 Â 500 Â 575 Â
Ïëîùàäü ïîïåðå÷íîãî ñå÷åíèÿ
ñèëîâîãî êàáåëÿ ïèòàíèÿ, ìì
2
4G6 4G6 4G4 4G4 4G4 4G4 4G4
Ôàçíûé òîê, I ýôô. 38 A 33 A 22 A 18 A 18 A 16 A 11 A
Ïðåäîõðàíèòåëü
Óñòîé÷èâûé ê ïåðåíàïðÿæåíèÿì
Òèï C, ìèíèàòþðíûé
âûêëþ÷àòåëü
50 A
50 A
50 A
50 A
25 A
32 A
20 A
-
20 A
-
16 A
-
16 A
-
Ïðèìå÷àíèå:
Ïðèâåäåííûå âûøå çíà÷åíèÿ ïëîùàäè ïîïåðå÷íîãî ñå÷åíèÿ êàáåëåé è íîìèíàëû
ïðåäîõðàíèòåëåé ñîîòâåòñòâóþò øâåäñêèì íîðìàì. Îíè ìîãóò îêàçàòüñÿ íåïðèìåíèìû â
äðóãèõ ñòðàíàõ: óáåäèòåñü â òîì, ÷òî ïëîùàäü ïîïåðå÷íîãî ñå÷åíèÿ êàáåëåé è íîìèíàëû
ïðåäîõðàíèòåëåé îòâå÷àþò ñîîòâåòñ òâóþùèì íàöèîíàëüíûì íîðìàì.
RU
bt23d1ra -- 1 2 --
5 ÏÎÐßÄÎÊ ÐÀÁÎÒÛ
Îáùèå ïðàâèëà òåõíèêè áåçîïàñíîñòè ïðè ðàáîòå ñ îáîðóäîâàíèåì
ïðèâîäÿòñÿ íà ñòð. 4. Ïðî÷òèòå èõ äî èñïîëüçîâàíèÿ îáîðóäîâàíèÿ!
5.1 Ñîåäèíåíèÿ è óñòðîéñòâà óïðàâëåíèÿ
1 Ñîåäèíèòåëü äëÿ ïîäà÷è
îõëàæäàþùåé âîäû îò ñâàðî÷íîé
ãîðåëêè TIG - ÊÐÀÑÍÛÉ
9 Ñåòåâîé âûêëþ÷àòåëü, 0 / 1 / ÂÊË.
2 Ñîåäèíèòåëü ñ âîäÿíûì çàòâîðîì äëÿ
îõëàæäàþùåé âîäû ê ñâàðî÷íîé
ãîðåëêå TIG - Ã Î ËÓÁÎÉ
10 Áåëàÿ èíäèêàòîðíàÿ ëàìïà - Èñòî÷íèê
ïèòàíèÿ ÂÊË. (ON)
3 Çàëèâíîå î òâåðñòèå äëÿ îõëàæäàþùåé
âîäû
11 Îðàíæåâàÿ èíäèêàòîðíàÿ ëàìïà -
Ïåðåãðåâ
4 Ñîåäèíèòåëü îáðàòíîãî êàáåëÿ (+) 12 Ïàíåëü óïðàâëåíèÿ
(ñì. ñîîòâåòñòâóþùèå èíñòðóêöèè)
5 Ñîåäèíèòåëü ïóëüòà äèñòàíöèîííîãî
óïðàâëåíèÿ
13 Ìèíèàòþðíûé âûêëþ÷àòåëü 4 AT.
6 Ñîåäèíèòåëü ñâàðî÷íîãî êàáåëÿ (-) 14 Ñîåäèíèòåëü ãàçîâîãî øëàíãà
7 Ñîåäèíèòåëü äëÿ ïîäà÷è ñèãíàëà ïóñêà
îò ñâàðî÷íîé ãîðåëêè
15 Ñîåäèíèòåëü äëÿ ïîäà÷è
îõëàæäàþùåé âîäû. Â äàííîé
ìîäåëè íå èñïîëüçóåòñÿ.
8 Ñîåäèíèòåëü äëÿ ïîäà÷è ãàçà ê
ñâàðî÷íîé ãîðåëêå TIG
16 Ñîåäèíèòåëü äëÿ ïîäà÷è
îõëàæäàþùåé âîäû. Â äàííîé
ìîäåëè íå èñïîëüçóåòñÿ.
RU
bt23d1ra -- 1 3 --
5.2 Âêëþ÷åíèå èñòî÷íèêà ïèòàíèÿ
Âêëþ÷èòå ïèòàíèå, ïîâåðíóâ âûêëþ÷àòåëü (9) â ïîëîæåíèå START (ÏÓÑÊ).
Îòïóñòèòå âûêëþ÷àòåëü, è îí âåðíåòñÿ â ïîëîæåíèå ”1”.
Åñëè òðåáóåòñÿ âðåìåííî îòêëþ÷èòü ïèòàíèå â ïðîöåññå ñâàðêè, à çàòåì
âíîâü âêëþ÷èòü åãî, òî èñòî÷íèê ïèòàíèÿ áóäåò îñòàâàòüñÿ îáåñòî÷åííûì äî
òåõ ïîð, ïîêà âûêëþ÷àòåëü ñíîâà íå áóäåò âðó÷íóþ ïîâåðíóò â ïîëîæåíèå
ST ART (ÏÓ ÑÊ).
×òîáû âûêëþ÷èòü èñòî÷íèê ïèòàíèÿ, ïîâåðíèòå åãî â ïîëîæåíèå ”0”.
Åñëè èñòî÷íèê ïèòàíèÿ îòêëþ÷èòñÿ â ðåçóëüòàòå ñáîÿ ïî ïèòàíèþ èëè
îáû÷íîãî âûêëþ÷åíèÿ âðó÷íóþ, òî ïàðàìåòðû ñâàðêè áóäóò ñîõðàíåíû, òàê
÷òî èõ ìîæíî áóäåò èñïîëüçîâàòü ïðè ñëåäóþùåì âêëþ÷åíèè áëîêà.
5.3 Óïðàâëåíèå âåíòèëÿòîðàìè
Âåíòèëÿòîðû èñòî÷íèêà ïèòàíèÿ ïðîäîëæàþò ðàáîòàòü â òå÷åíèå 6,5 ìèí
ïîñëå ïðåêðàùåíèÿ ñâàðêè, è áëîê ïåðåêëþ÷àåòñÿ â ðåæèì
ýíåðãîñáåðåæåíèÿ. Ïðè âîçîáíîâëåíèè ñâàðêè âåíòèëÿòîðû âíîâü íà÷íó ò
ðàáîòàòü.
Âåíòèëÿòîðû ðàáîòàþò íà ïîíèæåííûõ îáîðîòàõ ïðè ñâàðî÷íûõ òîêàõ äî 144 A
èíàïîëíûõîáîðîòàõïðèáîëüøèõòîêàõ.
5.4 Çàùèòà îò ïåð åãðåâà
Èñòî÷íèê ïèòàíèÿ èìååò äâà ðåëå çàùèòû îò òåïëîâîé ïåðåãðóçêè, êîòîðûå
ñðàáàòûâàþò ïðè íåäîïóñòèìîì âîçðàñòàíèè âíóòðåííåé òåìïåðàòóðû. Ïðè
ýòîì ïðåêðàùàåòñÿ ïîäà÷à ñâàðî÷íîãî òîêà è çàãîðàåòñÿ îðàíæ åâàÿ
èíäèêàòîðíàÿ ëàìïà íà ëèöåâîé ïàíåëè áëîêà. Êîãäà òåìïåðàòóðà ñíèçèòñÿ,
ðåëå âíîâü àâòîìàòè÷åñêè âêëþ÷àòñÿ.
5.5 Áëîê îõëàæäåíèÿ
Âîäÿíîé çà òâîð
Áëîê îõëàæäåíèÿ èìååò âîäÿíîé çàòâîð, êîòîðûé îïðåäåëÿåò, ïîäñîåäèíåíû
ëè øëàíãè ïîäà ÷è îõëàæäàþùåé âîäû.
Âûê ëþ÷àòåëü ”Âêë./Âûêë.” (On/Off) èñòî÷íèêà ïèòàíèÿ äîëæåí íàõîäèòüñÿ â
ïîëîæåíèè “0” (Off) ïðè ïîäñîåäèíåíèè ñâàðî÷íîé ãîðåëêè TIG ñ âîäÿíûì
îõëàæäåíèåì.
Åñëè ïîäñîåäèíåíà ñâàðî÷íàÿ ãîðåëêà TIG, òî âîäÿíîé íàñîñ àâòîìàòè÷åñêè
íà÷èíàåò ðàáîòàòü, êîãäà ãëàâíûé âûêëþ÷àòåëü ”Âêë./Âûêë.” ïîâåðíó ò â
ïîëîæåíè å START (ÏÓÑÊ) è(èëè) êîãäà íà÷àò ï ðîöåññ ñâàðêè. Ïîñëå
ïðåêðàùåíèÿ ñâàðêè íàñîñ ïðîäîëæàåò ðàáîòàòü â òå÷åíèå 6,5 ìèí, à çàòåì
ïåðåêëþ÷àåòñÿ â ðåæèì ýíåðãîñáåðåæåíèÿ.
RU
bt23d1ra -- 1 4 --
Ïîðÿäîê ðàáîòû ïðè ñâàðêå
×òîáû íà÷àòü ñâàðêó, ñâàðùèê íàæèìàåò ïóñêîâîé âûêëþ÷àòåëü ãîðåëêè.
Èñòî÷íèê ïèòàíèÿ âêëþ÷àåò ãîðåëêó, áëîê ïîäà÷è ïðîâîëîêè è íàñîñ ïîäà÷è
îõëàæäàþùåé âîäû.
×òîáû îñòàíîâèòü ïðîöåññ ñâàðêè, ñâàðùèê îòïóñêàåò ïóñêîâîé âûêëþ÷àòåëü
ãîðåëêè. Ïîäà÷à ñâàðî÷íîãî òîêà ïðåêðàùàåòñÿ, îäíàêî íàñîñ ïîäà÷è
îõëàæäàþùåé âîäû ïðîäîëæàåò ðàáîòàòü â ò å ÷åíèå 6,5 ìèí, ïîñëå ÷åãî áëîê
ïåðåêëþ÷àåòñÿ â ðåæèì ýíåðãîñáåðåæåíèÿ.
Çàùèòíîå óñòðîéñòâî ñ äàò÷èêîì ðàñõîäà âîäû
Çàùèòíîå óñòðîéñòâî ñ äàò÷èêîì ðàñõîäà âîäû îòêëþ÷àåò ñâàðî÷íûé òîê ïðè
îò ñóòñòâèè îõëàæäàþùåé æèäêîñòè è âûâîäèò ñîîáùåíèå îá îøèáêå íà
ïàíåëü óïðàâëåíèÿ. Ýòî çàùèòíîå óñòðîéñòâî ïîñòàâëÿåòñÿ êàê
äîïîëíèòåëüíàÿ ïðèíàäëåæíîñòü.
5.6 Ïóëüò äèñòàíöèîííîãî óïðàâëåíèÿ
Äëÿ íàäëåæàùåãî ôóíêöèîíèðîâàíèÿ äèñòàíöèîííîãî óïðàâëåíèÿ íà
ìàøèíàõ Aristo ñî âñòðîåííûìè ïàíåëÿìè óïðàâëåíèÿ äîëæíà áûòü
óñòàíîâëåíà âåðñèÿ ïðîãðàììíîãî îáåñïå÷åíèÿ 1.21 èëè âûøå.
Åñëè ïóëüò äèñòàíöèîííîãî óïðàâëåíèÿ ïîäêëþ÷åí, èñòî÷íèê ïèòàíèÿ è áëîê
ïîäà÷è ïðîâîëîêè íàõîäÿòñÿ â ðåæèìå äèñòàíöèîííîãî óïðàâëåíèÿ; êíîïêè è
ðó÷êè áëîêèðóþòñÿ. Ðåãóëèðîâêó âñåõ ôóíêöèé ìîæíî âûïîëíèòü òîëüêî ïðè
ïîìîùè ïóëüòà äèñòàíöèîííîãî óïðàâëåíèÿ.
Åñëè ïóëüò äèñòàíöèîííîãî óïðàâëåíèÿ íå èñïîëüçóåòñÿ, åãî âìåñòå ñ
à äàïòåðîì ñëåäóåò îòñîåäèíèòü îò èñòî÷íèêà ïèòàíèÿ è áëîêà ïîäà÷è
ïðîâîëîêè, êîòîðûå â ïðîòèâíîì ñëó÷àå áóäó ò ïðîäîëæàòü ðàáîòàòü â ðåæèìå
äèñòàíöèîííîãî óïðàâëåíèÿ.
Ïðè âûïîëíåíèè ñâàðêè TIG âåëè÷èíó èìïóëüñíîãî òîêà ìîæíî èçìåíèòü ïðè
ïîìîùè ïóëüòà äèñòàíöèîííîãî óïðàâëåíèÿ.
Ïîäðîáíûå ñâåäåíèÿ î ðàáîòå ïóëüòà äèñòàíöèîííîãî óïðàâëåíèÿ ïðèâåäåíû
â èíñòðóêöèÿõ ïî ýêñïëóàòàöèè ïàíåëè óïðàâëåíèÿ.
6 ÒÅÕÍÈ×ÅÑÊÎÅ ÎÁÑËÓÆÈÂÀÍÈÅ
Ðåãóëÿðíîå òåõíè÷åñêîå îáñëóæèâàíèå èìååò âàæíîå çíà÷åíèå äëÿ
îáåñïå÷åíèÿ áåçîïàñíîñòè è íàäåæíîñòè.
Ïîäêëþ÷åíèå, îáñëóæèâàíèå è ðåìîíò ñâàðî÷íîãî îáîðóäîâàíèå, ñâÿçàííûå
ñî ñíÿòèåì çàùèòíûõ ùèòêîâ, âûïîëíÿþòñÿ ëèöàìè, ïðîøåäøèìè
ñîîòâåòñòâóþùóþ ýëåêòðîòåõíè÷åñêóþ ïîäãîòîâêó è àòòåñòîâàííûìè íà ïðàâî
âûïîëíåíèÿ òà êèõ ðàáîò.
Ïðèìå÷àíèå:
à àðàíòìèéíûå îáÿçàòåëüñòâà ïîñòàâùèêà òåðÿþò ñèëó, åñëè ïîêóïàòåëú
ñàìîñòîÿòåëúíî ïûòàåòñÿ ïð îèçâåñòè êàêèå-ëèáî ðàáîòû ïî óñòðàíåíèþ
íåèñïðàâíîñòåé èçäåëèÿ â òå÷åíèå ãàðàíòèéíîãî ñðîêà.
RU
bt23d1ra -- 1 5 --
6.1 Î÷èñòêà âîçäóøíîãî ôèëüòðà
S Ðàçáëîêèðóéòå âåðõíþþ êðûøêó ñ
ïûëåóëàâëèâàþùè ì ôèëüòðîì (1).
S Îòêèíüòå âåðõíþþ êðûøêó (2).
S Èçâëåêèòå ôèëüòð (3).
S Ïðîäóéòå åãî íà÷èñò î ñæàòûì
âîçäóõîì íèçêîãî äàâëåíèÿ.
S Óñòàíîâèòå ôèëüòð íà ìåñòî,
ïîâåðíóâ åãî ñåòêîé ñ áîëåå
ìåëêèìè ÿ÷åéêàìè ê âåðõíåé
êðûøêå (2).
S Çàêðîéòåâåðõíþþêðûøêóâìåñòåñ
ôèëüòðîì.
6.2 Ïîïîëíåíèå îõëàæäàþùåé æèäêîñòè
Ðåêîìåíäóåòñÿ èñïîëüçîâàòü ñìåñü èç 50%
âîäû è 50% ýòèëåíãëèêîëÿ.
Äîëèâàéòå êàæäûé èç êîìïîíåíòîâ, ïîêà
óðîâåíü îõëàæäàþùåé æèäêîñòè íå
äîñòèãíåò çàëèâíîãî îòâåðñòèÿ.
7 ÂÛßÂËÅÍÈÅ ÍÅÈÑÏÐÀÂÍÎÑÒÅÉ
Ïðåæäå ÷åì âûçûâàòü àòòåñòîâàííîãî ñïåöèàëèñòà ïî îáñëóæèâàíèþ,
ïîïðîáóéòå ñàìîñòîÿòåëüíî âûïîëíèòü ðåêîìåíäóåìûå íèæå ïðîâåðêè.
Òèï íåèñïðàâíîñòè Äåéñòâèÿ:
Îòñóòñòâèå äóãè S Ïðîâåðüòå, âêëþ÷åí ëè âûêëþ÷àòåëü ïèòàíèÿ.
S Ïðîâåðüòå ïðàâèëüíîñòü ïîäñîåäèíåíèÿ êàáåëåé
ïîäà÷è ñâàðî÷íîãî òîêà è îáðàòíûõ êàáåëåé.
S Ïðîâåðüòå, ïðàâèëüíî ëè çàäàíà â åëè÷èíà òîêà.
S Ïðîâåðüòå, íå îòêëþ÷åí ëè ìèíèàòþðíûé âûêëþ÷àòåëü.
Ïðåðûâàíèå ñâàðî÷íîãî òîêà
âî âðåìÿ ñâàðêè
S Ïðîâåðüòå, íå ñðàá îòàëè ëè ðåëå çàùèòû îò òåïëîâîé
ïåðåãðóçêè (ñðàáàòûâàíèå ðåëå îïðåäåëÿåòñÿ ïî
çàãîðàíèþ îðàíæåâîé ëàìïû íà ëèöåâîé ïàíåëè).
S Ïðîâåðüòå ñåòåâûå ïðåäîõðàíèòåëè.
×àñòî ñðàá àòûâàþò ðåëå
çàùèòû îò òåïëîâîé
ïåðåãðóçêè.
S Ïðîâåðüòå, íå çàñîðåíû ëè âîçäóøíûå ôèëüòðû.
S Óáåäèòåñü â òîì, ÷òî íå ïðåâûøåíû íîìèíàëüíûå
çíà÷åíèÿ ïàðàìåòðîâ èñòî÷íèêà ïèòàíèÿ (ò. å. ÷òî
óñòðîéñòâî ðàáîòàåò áåç ïåðåãðóçêè).
Íèçêàÿ ýôôåêòèâíîñòü
ñâàðêè.
S Ïðîâåðüòå ïðàâèëüíîñòü ïîäñîåäèíåíèÿ êàáåëåé
ïîäà÷è ñâàðî÷íîãî òîêà è îáðàòíûõ êàáåëåé.
S Ïðîâåðüòå, ïðàâèëüíî ëè çàäàíà â åëè÷èíà òîêà.
S Óá åäèòåñü â òîì, ÷òî èñïîëüçóþòñÿ ýëåêòðîäû
òðåáóåìîãî òèïà.
S Ïðîâåðüòå ñåòåâûå ïðåäîõðàíèòåëè.
RU
bt23d1ra -- 1 6 --
8 ÈÍÔÎÐÌÀÖÈß ÄËß ÇÀÊÀÇÀ ÇÀÏÀÑÍÛÕ ×ÀÑÒÅÉ
Ðàáîòû ïî ðåìîíòó è ýëåêòðè÷åñêîìó ìîíòàæó äîëæíû âûïîëíÿòüñÿ
êâàëèôèöèðîâàííûì ñïåöèàëèñòîì ESAB .
Íåîáõîäèìî èñïîëüçîâàòü òîëüêî çàïàñíûå ÷àñòè, âûïóùåííûå ôèðìîé
ESAB.
Çàïàñíûå ÷àñòè ìîæíî çàêàçòú ó áëèæàéøåãî ê Âàì ESAB, (ñì. ïåðå÷åíú íà
ïîñëåäíåé ñòðàíèöå äàííîé áðîøþðû).
RU
ENGLISH
-- 1 7 --
TOCe
1 DIRECTIVE 18........................................................
2SAFETY 18...........................................................
3 INTRODUCTION 20...................................................
3.1 Equipment 20................................................................
3.2 The control panel 20..........................................................
4 TECHNICAL DATA 21.................................................
5 INSTALLATION 22....................................................
5.1 Lifting instructions 22.........................................................
5.2 Placing 22...................................................................
5.3 Electrical installation (with autotransformer) 23...................................
5.4 Mains power supply 24........................................................
6 OPERATION 25.......................................................
6.1 Connections and control devices 25............................................
6.2 Turning on the power source 25................................................
6.3 Fan control 26...............................................................
6.4 Overheating protection 26.....................................................
6.5 Cooling unit 26...............................................................
6.6 Remote control unit 26........................................................
7 MAINTENANCE 27....................................................
7.1 Cleaning the air filter 27.......................................................
7.2 Topping up the coolant 27.....................................................
8 FAULT TRACING 28...................................................
9 ORDERING OF SPARE PARTS 28......................................
DIAGRAM 30............................................................
ORDERING NUMBER 33.................................................
SPARE PARTS LIST 34...................................................
ACCESSORIES 35.......................................................
-- 1 8 --
bt23d0ea
1DIRECTIVE
DECLARATION OF CONFORMITY
ESAB Welding Equipment AB, S--695 81 Laxå, Sweden, gives its unreserved guarantee that welding
power source LTC 400 from serial number 050 complies with standard IEC/EN 60974--1, in accord-
ance with the requirements of directive (73/23/EEC) and addendum (93/68/EEC) and with standard
EN 50199 in accordance with the requirements of directive (89/336/EEC) and addendum
(93/68/EEC).
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------
Joakim Cahlin
Vice President
ESAB Welding Equipment AB
695 81 LAXÅ
SWEDEN Tel: + 46 584 81000 Fax: + 46 584 411924
Laxå 2001
2SAFETY
Users of ESAB welding equipment have the ultimate responsibility for ensuring that anyone who
works on or near the equipment observes all the relevant safety precautions. Safety precautions
must meet the requirements that apply to this type of welding equipment. The following recommen-
dations should be observed in addition to the standard regulations that apply to the workplace.
All work must be carried out by trained personnel well--acquainted with the operation of the welding
equipment. Incorrect operation of the equipment may lead to hazardous situations which can result
in injury to the operator and damage to the equipment.
1. Anyone who uses the welding equipment must be familiar with:
S its operation
S location of emergency stops
S its function
S relevant safety precautions
S welding
2. The operator must ensure that:
S no unauthorized person is stationed within the working area of the equipment when it is
started up.
S no--one is unprotected when the arc is struck
3. The workplace must:
S be suitable for the purpose
S be free from drafts
4. Personal safety equipment
S Always wear recommended personal safety equipment, such as safety glasses, flame--proof
clothing, safety gloves.
S Do not wear loose--fitting items, such as scarves, bracelets, rings, etc., which could become
trapped or cause burns.
5. General precautions
S Make sure the return cable is connected securely.
S Work on high voltage equipment may only be carried out by a qualified electrician.
S Appropriate fire extinquishing equipment must be clearly marked and close at hand.
S Lubrication and maintenance must not be carried out on the equipment during operation.
GB
-- 1 9 --
bt23d1ea
WARNING
READ AND UNDERSTAND THE INSTRUCTION MANUAL BEFORE INSTALLING OR OPERATING.
ARC WELDING AND CUTTING CAN BE INJURIOUS TO YOURSELF AND OTHERS. TAKE PRECAU-
TIONS WHEN WELDING. ASK FOR YOUR EMPLOYER’S SAFETY PRACTICES WHICH SHOULD BE
BASED ON MANUFACTURERS’ HAZARD DATA.
ELECTRIC SHOCK -- Can kill
S Install and earth the welding unit in accordance with applicable standards.
S Do not touch live electrical parts or electrodes with bare skin, wet gloves or wet clothing.
S Insulate yourself from earth and the workpiece.
S Ensure your working stance is safe.
FUMES AND GASES -- Can be dangerous to health
S Keep your head out of the fumes.
S Use ventilation, extraction at the arc, or both, to take fumes and gases away from your breathing zone
and the general area.
ARC RAYS -- Can injure eyes and burn skin.
S Protect your eyes and body. Use the correct welding screen and filter lens and wear protective
clothing.
S Protect bystanders with suitable screens or curtains.
FIRE HAZARD
S Sparks (spatter) can cause fire. Make sure therefore that there are no inflammable materials nearby.
NOISE -- Excessive noise can damage hearing
S Protect your ears. Use earmuffs or other hearing protection.
S Warn bystanders of the risk.
MALFUNCTION -- Call for expert assistance in the event of malfunction.
PROTECT YOURSELF AND OTHERS!
ESAB can provide you with all necessary welding p rotectio n and accessories.
WARNING!
Read and understand the instruction manual before installing
or operating.
Do not use the power source for thawing frozen pipes.
WARNING!
This product is solely intended for arc welding.
Do not dispose of electrical equipment together with normal waste!
In observance of European Directive 2002/96/EC on Waste Electrical and Electronic
Equipment and its implementation in accordance with national law, electrical equipment
that has reached the end of its life must be collected separately and returned to an
environmentally compatible recycling facility. As the owner of the equipment, you should
get information on approved collection systems from our local representative.
By applying this European Directive you will improve the environment and human health!
GB
-- 2 0 --
bt23d1ea
3 INTRODUCTION
The AristoTig 400 is a TIG welding power source, which can also be used for MMA
welding.
There are eight variants of the power source:
S AristoTig 400 with T4 control panel
S AristoTig 400 with T6 control panel
S AristoTig 400 with cooling unit and T4 control panel
S AristoTig 400 with cooling unit and T6 control panel
S AristoTig 400 with autotransformer and T4 control panel
S AristoTig 400 with autotransformer and T6 control panel
S AristoTig 400 with cooling unit, autotransformer and T4 control panel
S AristoTig 400 with cooling unit, autotransformer and T6 control panel
NB: These instructions describe an AristoTig 400 with cooling unit and
autotransformer.
ESAB’s accessories for the product can be found on page 35.
3.1 Equipment
The AristoTig 400 is delivered with 5m return cable, instructions for power source
and one instruction for the control panel.
3.2 The control panel
The power source is supplied with one of the following control panels:
S T4 panel
With a knob for adjusting the current. Other parameters are controlled by
pushbuttons, with symbols in the display panel.
S T6 panel
With a knob for adjusting the current. Other parameters are controlled by
pushbuttons, with text in the display panel.
See the separate instructions for detailed descriptions of the control panels.
GB
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40

ESAB AristoTig 400 Manuale utente

Categoria
Sistema di saldatura
Tipo
Manuale utente
Questo manuale è adatto anche per

in altre lingue