SGM Idea Par LED Zoom RGB Manuale utente
- Categoria
- Stroboscopi
- Tipo
- Manuale utente
GB
Idea Par Led Zoom RGB XM368-V1.2 -B
1
Sommario
INTRODUCTION:...............................................................................................................................................2
DESCRIPTION OF THE DEVICE.................................................................................................................2
Features.................................................................................................................................................................. 2
OVERVIEW ...........................................................................................................................................................3
SAFETY INSTRUCTIONS ...............................................................................................................................3
GENERAL GUIDELINES..................................................................................................................................4
INSTALLATION INSTRUCTIONS..............................................................................................................5
Mounting the device........................................................................................................................................... 5
Overhead rigging................................................................................................................................................. 6
DMX-512 control connection................................................................. Errore. Il segnalibro non è definito.
Control Board ....................................................................................................................................................... 8
Main functions: .................................................................................................................................................... 9
INSTRUCTIONS ON USE: ...........................................................................................................................15
INSTRUCTIONS FOR INSTALLING THE BARN-DOOR AND FROST FILTER....................17
CLEANING AND MAINTENANCE.............................................................................................................17
TECHNICAL SPECIFICATIONS ................................................................................................................18
GB
XM368-V1.2 -B Idea Par Led Zoom RGB
2
KEEP THIS MANUAL FOR FUTURE NEEDS
Thank you for your patronage. We are confident that our excellent products and service can satisfy you.
For your own safety, please read this user manual carefully before installing the device.
CAUTION
Keep this device away from rain and moisture!
Unplug mains lead before opening the housing
Every person involved with the installation, operation and maintenance of this device has to
- be qualified
- follow the instructions of this manual
- consider this manual to be part of the total product
- keep this manual for the entire service life of the product
- pass this manual on to every further owner or user of the product
- download the latest version of the user manual from the Internet
INTRODUCTION:
Thank you for having chosen this professional LED lighting.
You will see you have acquired a powerful and versatile device.
Unpack the device. Inside the box you should find:
1. The fixture device
2. One power cables
3. One XLR connection cable
4. One safety rope and this manual
Belows are the optional accessories, please purchase from your local dealer if needed
1. Barn-door
2. Frost filter
Please check carefully that there is no damage caused by transportation. Should there be any, consult your
dealer and don’t install this device.
DESCRIPTION OF THE DEVICE
Features
Equipped with 36 x3 W LEDS: 10 x red, 10 x blue, 16 x green
50,0 000 hours LED life
DMX channel: 8 channels
Strobe-effect with 1-18 flashes per second
Zoom: 13°~55° linear zoom
Stepless RGB colour changing
Programmable color-change speed and strobe effect
4digit LED display
Software-upload by optional accessory via DMX line
GB
Idea Par Led Zoom RGB XM368-V1.2 -B
3
OVERVIEW
SAFETY INSTRUCTIONS
CAUTION!
Be careful with your operations. With a dangerous voltage you can suffer a
dangerous electric shock when touching wires!
This device has left the factory in perfect condition. In order to maintain this condition and to ensure a safe
operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written
in this user manual.
Important:
Damages caused by the disregard of this user manual are not subject to warranty. The
dealer will not accept liability for any resulting defects or problems.
If the device has been exposed to temperature changes due to environmental changes, do not switch it on
immediately. The arising condensation could damage the device. Leave the device switched off until it has
reached room temperature.
This device falls under protection-class I. Therefore it is essential that the device be earthed.
The electric connection must carry out by qualified person.
The device shall only be used with rate voltage and frequency.
Make sure that the available voltage is not higher than stated at the end of this manual.
1. Housing
2. LEDS
3. Floor-stand
4. Menu-button
5. Up-button
6. Down-button
7. Enter-button
8. Power input
9. DMX output
10. DMX-input
GB
XM368-V1.2 -B Idea Par Led Zoom RGB
4
Make sure the power cord is never crimped or damaged by sharp edges. If this would be the case,
replacement of the cable must be done by an authorized dealer.
Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle the power
cord by the plug. Never pull out the plug by tugging the power cord.
During initial start-up some smoke or smell may arise. This is a normal process and does not necessarily
mean that the device is defective, it should decrease gradually.
Please don't project the beam onto combustible substances.
Fixtures cannot be installed on combustible substances, keep more than 30cm distance with wall for smooth
air flow, so there should be no shelter for fans and ventilation for heat radiation.
If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the
manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
CAUTION!
Never touch device during operation! The housing may heat up
Never look directly into the light source, as sensitive persons may suffer an
epileptic shock.
Please be aware that damages caused by manual modifications to the device are not subject to warranty.
Keep away from children and non-professionals.
GENERAL GUIDELINES
This device is a lighting effect for professional use on stages, in discotheques, theatres, etc.
This fixture is only allowed to be operated with the max alternating current which stated in the technical
specifications in the last page of this manual, the device was designed for indoor use only.
Lighting effects are not designed for permanent operation. Consistent operation breaks may ensure that the
device will serve you for a long time without defects. Do not shake the device.
Avoid brute force when installing or operating the device.
The device shall only be used complete with its protective shield.
While choosing the installation-spot, please make sure that the device is not exposed to extreme heat,
moisture or dust. The minimum distance between light-output from the projector and the illuminated
surface must be more than 0.1 meter.
Operate the device only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the device. Most damages are the result of unprofessional operation.
Please use the original packaging if the device is to be transported.
For safety reasons, please be aware that all modifications on the device are forbidden.
If this device will be operated in any way different to the one described in this manual, the product may
suffer damages and the guarantee becomes void. Furthermore, any other operation may lead to
short-circuit, burns, electric shock, lamp explosion, crash, etc.
GB
Idea Par Led Zoom RGB XM368-V1.2 -B
5
INSTALLATION INSTRUCTIONS
CAUTION!
Do not operate this device with open cover.
Only install the lamp with the device unplugged from the mains
.
Mounting the device
CAUTION
Please consider the EN 60598-2-17 and the other respective national
norms during the installation. The installation must only be carried out by
a qualified person.
The applicable temperature for the lignting is between -25°C to 45°C. Do not use the lighting under or above
the temperature.
The installation of the effect has to be built and constructed in a way that it can hold 10 times the weight for
1 hour without any harming deformation.
The installation must always be secured with a secondary safety attachment, e.g. an appropriate
safety rope.
Never stand directly below the device when mounting, removing or servicing the fixture.
The operator has to make sure the safety relating and machine technical installations are approved by an
expert before taking the device into operation for the first time.
These installations have to be approved by a skilled person once a year.
CAUTION
Before taking into operation for the first time, the installation has to be
approved by an expert.
Cautions:
The effect should be installed outside areas where persons may reach it, walk by or be seated.
CAUTION
When installing the device, make sure there in no highly inflamm able
material within a distance of min. 0,5m
Overhead mounting requires extensive experience, including amongst others calculating working load limits,
installation material being used, and periodic safety inspection of all installation material and the device. If
you lack these qualifications, do not attempt the installation yourself. Improper installation can result in
bodily injury.
CAUTION
The electric connection must only be carried out by a qualified electrician.
Before mounting make sure that the installation area can hold a minimum point load of 10 times the device’s
weight.
Connect the fixture to the mains with the power plug.
GB
XM368-V1.2 -B Idea Par Led Zoom RGB
6
Overhead rigging
Screw the bolt of the clamp into the hold of the bracket, and tighten the screw underneath.
Pull the safety-rope through the holes on the bracket of the base and over the trussing system or a safe
fixation spot. Insert the end in the carabine and tighten the safety screw.
DMX-512 control connection
The product has a DMX 512 input fitted with standard 5-pin XLR connectors. Screened cables in compliance
with EIA RS-485 specifications and the following characteristics must be used for connections:
- 2 conductors plus screen
- 120Ohm impedance
- low capacitance
- max. transmission rate 250kBaud.
Cable connections:
see illustration, taking care with the screen, which must be connected
to Pin 1
Address 13 Address 7 Address 1
Please note: to ensure maximal stability, when the voltage is 120V, only six devices may be connected
GB
Idea Par Led Zoom RGB XM368-V1.2 -B
7
Please note: to ensure maximal stability, when the voltage is 120V, only five devices may be connected
together in this manner! From the sixth device, please connect to power supply to get power for the second
link; when the voltage is over 220V, only ten devices may be connected together in this manner! From the
eleventh device, please connect to power supply to get power for the second link.
DMX-512 connection with DMX terminator
For installations where the DMX cable has to run a long distance or is in an electrically noisy environment,
such as in a discotheque, it is recommended to use a DMX terminator. This helps in preventing corruption of
the digital control signal by electrical noise. The DMX terminator is simply an XLR plug with a 120 Ω resistor
connected between pins 2 and 3,which is then plugged into the output XLR socket of the last fixture in the
chain. Please see illustrations below.
4
5
Projector DMX starting address selection
All fixtures should be given a DMX starting address when using a DMX signal, so that the correct fixture
responds to the correct control signals. This digital starting address is the channel number from which the
fixture starts to “listen” to the digital control information sent out from the DMX controller. The allocation of
this starting address is achieved by setting the correct number on the display located on the base of the
device.
You can set the same starting address for all fixtures or a group of fixtures, or make different address for
each fixture individually.
If you set the same address, all the units will start to “listen” to the same control signal from the same
channel number. In other words, changing the settings of one channel will affect all the fixtures
simultaneously.
If you set a different address, each unit will start to “listen” to the channel number you have set, based on
the quantity of control channels of the unit. That means changing the settings of one channel will affect only
the selected fixture.
In the case of the led lighting, which is 8 channels fixture when you select the standard channel mode, you
should set the starting address of the first unit to 1, the second unit to 9(8 + 1), the third unit to 17 (8+ 9),
and so on.
GB
XM368-V1.2 -B Idea Par Led Zoom RGB
8
Control Board
Default settings shaded.
VALU
A001~XXX
(AXXX)
DMX address setting
SLAV
ON/OFF
(SLAV)
Slave setting
ADDR
RDMX ON/OFF
Change DMX address via
external controller
ALON (AU-A)
Automatic Run in Stand
Alone
AUTO
MAST (AU-M) Automatic Run as Master
ALON (SO-A)
Sound-controlled Run in
Stand Alone
RUN
SOUN
MAST (SO-M)
Sound-controlled Run as
Master
VALU
D–XX D-00
(DXXX)
Display the DMX 512 value
of each channel
FLIP ON/OFF Reverse display
D ON ON/OFF Shut off LED display
0 MODE
DISP
LOCK ON/OFF
Key lock
(Press the MENU button
for 3 seconds to activate)
MIC M-XX Mic sensitivity
FAIL
OFF/HOLD/
AUTO/SOUN
No DMX Status
REST Reset
DFSE ON/OFF Restore factory settings
POHO ON/OFF
Power on to preserve the
MANL settings
1 SET
VER V-1.0~V-9.9 Software version
2 MANL
<RED
GREN
BLUE
MACO
PROG
STRB
DIMM
ZOOM>
R
XXX(000~255)
G
XXX(000~255)
B
XXX(000~255)
M
XXX(000~255)
P
XXX(000~255)
S
XXX(000~255)
D
XXX(000~255)
Z
XXX(000~255)
Test function of each
channel
LIFE 0000~9999(hours)
Fixture running time
3 TIME
CLFE ON/OFF
Clear fixture time *code is
“838”
STEP S–01 ~S–48 Steps of Program Run
REC. RE.XX Auto Save Scene
<RED
GREN
BLUE
MACO
PROG
STRB
DIMM
ZOOM>
R
XXX(000~255)
G
XXX(000~255)
B
XXX(000~255)
M
XXX(000~255)
P
XXX(000~255)
S
XXX(000~255)
D
XXX(000~255)
Z
XXX(000~255)
Edit the channels of each
scene
FADE XXX Adjust fade speed
4 EDIT
SC01
~ SC48
CEDT
ON/OFF Edit program via controller
GB
Idea Par Led Zoom RGB XM368-V1.2 -B
9
Main functions:
- Main menu 0
1. Press [MENU] to enter the main menu "MODE" (display flashing)
2. Press [ENTER] and select "ADDR", “RUN” or "DISP" by pressing [UP] or [DOWN] button.
3. Press [ENTER] for selecting the desired sub menu.
- DMX address setting, Slave setting
-
DMX address setting
With this function, you can adjust the desired DMX-address via the Control Board.
1. Select “VALU” by pressing [UP] or [DOWN] button.
2. Press [ENTER], adjust the DMX address by pressing [UP] or [DOWN] button.
3. Press [ENTER] to confirm or pressing [MENU] to return to main menu.
- Slave setting
With this function, you can define the device as slave.
1. Select “SLAV” by pressing [UP] or [DOWN] button.
2. Press [ENTER], the display shows “ON” or “OFF”.
3. Press [UP] to select “ON” if you wish to enable this function or press [DOWN] to select “OFF” if you
don’t.
4. Press [ENTER] to confirm or press [MENU] to return to main menu.
-
DMX address setting via controller
With this function, you can adjust the desired DMX-address via an external controller.
This function can only be activated when the DMX-value of all other channels is set to "0" on the
controller.
1. Select “RDMX” by pressing [UP] or [DOWN].
2. Press [ENTER], the display shows “ON” or “OFF”.
3. Press [UP] to select “ON” if you wish to enable this function or [DOWN] to select “OFF” if you don’t.
4. Press [MENU] to confirm.
5. Press [ENTER] in order to return to the main menu.
GB
XM368-V1.2 -B Idea Par Led Zoom RGB
10
- Program Run, Master setting
With the function "RUN", you can run the internal program. You can set the number of steps under Step.
You can edit the individual scenes under Edit. You can run the individual scenes either automatically (AUTO),
i.e. with the adjusted Step-Time or sound-controlled (SOUN). The selection "ALON" means Stand
Alone-mode and "MAST" that the device is defined as master.
1. Select "AUTO" or "SOUN" by pressing [UP] or [DOWN] button.
2. Press [ENTER] for selecting the desired extension menu.
3. Select "ALON" or "MAST" by pressing [UP] or [DOWN] button.
4. Press [ENTER] to confirm or Press [MENU] to return to the main menu.
-
Display the DMX-value, Reverse display, Shut off LED display
- Display the DMX 512 value of each channel
With this function you can display the DMX 512 value of each channel.
1. Select "VALU" by pressing [UP] or [DOWN] button.
2. Press [ENTER] to confirm; the display shows“D-00”. In this setting, the DMX-adjustment of every
channel will be displayed.
3. Press [UP] or [DOWN] button in order to select the desired channel. If you select “D-12” the display
will only show the DMX-value of the 12
th
channel.
4. Press [ENTER] to confirm or Press [MENU] to return to the main menu.
5. The display shows "D- XX”, “X” stands for the DMX-value of the selected channel.
- Reverse display
With this function you can rotate the display by 180°.
1. Select "FLIP" by pressing [UP] or [DOWN] button.
2. Press [ENTER], the display shows “ON” or “OFF”.
3. Press [UP] to select “ON” if you wish to enable this function or press [DOWN] button to “OFF” if you
don’t; the display will rotate by 180°.
4. Press [ENTER] to confirm or Press [MENU] to return to the main menu.
- Shut off LED display
With this function you can shut off the LED display after 2 minutes.
1. Select "D ON" by pressing [UP] or [DOWN] button.
2. Press [ENTER], the display shows “ON” or “OFF”.
3. Press [UP] to select “ON” if you wish to enable this function or press [DOWN] button to “OFF” if you
don’t.
4. Press [ENTER] to confirm or Press [MENU] to return to the main menu.
GB
Idea Par Led Zoom RGB XM368-V1.2 -B
11
—
Locked keys the display
With this function you can activate the automatic keylock status. If this function is activated, the keys will be
locked automatically after exiting the edit mode for 15 seconds. keeping press the [MENU] key for 3seconds
if you do not need this function.
1. Tap the [UP] button until “LOCK” is displayed and tap the [ENTER] button.
2. Press the [UP] button to select “ON” to activate this function, or “OFF” to deactivate this function.
Press [ENTER] to confirm.
3. Press [MENU] to return to the main menu.
-
Main menu 1
1. Press [MENU] to enter the main menu (display flashing).
2. Press [UP] or [DOWN] button. to select “SET”.
-
Mic sensitivity
With this function you can adjust the sensitivity of the microphone.
1. Select “MIC” by pressing [UP] or [DOWN] button.
2. Press [ENTER], the display shows “M-XX”, “XX” stands for the number from 0 to 99.
3. Press [ENTER] to confirm or Press [MENU] to return to the main menu.
-Automatic Run by no DMX
With this function you can automatic run the device by no DMX.
1. Select “FAIL” by pressing [UP] or [DOWN] button.
2. Press [ENTER], the display shows “OFF”, “HOLD”, “AUTO” or “SOUN”.
3. Press [UP] or [DOWN] button to select“OFF”, “HOLD”, “AUTO” or “SOUN”., the default is “HOLD”.
4. Press [ENTER] to confirm or Press [MENU] to return to the main menu.
-
Reset
With this function you can reset the device via the Control Board.
1. Select “REST” by pressing [UP] or [DOWN] button.
2. Press [ENTER] to reset or Press [MENU] to return to the main menu.
- Restore factory settings
With this function you can restore the factory settings of the device. All settings will be set back to the default
values (shaded). Any edited scenes will be lost.
1. Select “DFSE” by pressing [UP] or [DOWN] button.
2. Press [ENTER], the display shows “ON” or “OFF”.
3. Press [UP] to select “ON” if you wish to enable this function or press [DOWN] button to “OFF” if you
don’t.
4. Press [ENTER] to confirm or Press [MENU] to return to the main menu.
GB
XM368-V1.2 -B Idea Par Led Zoom RGB
12
——Power on to preserve the MANL settings
With this function you can activate. The fixture will return to the scene manual set before automatically
after re-power on.
1. Tap the [UP] button until “POHO” is displayed and tap the [ENTER] button.
2. Press the [UP] button to select “ON” to activate this function, or “OFF” to deactivate this function.
Press [ENTER] to confirm.
3. Press [MENU] to return to the main menu.
- Software version
With this function you can display the software version of the device.
1. Select “VER” by pressing [UP] or [DOWN] button.
2. Press [ENTER], The display will show “V-XX”, "XX" stands for the version number, such as the display
may also show,"V-1.0","V-9.9"etc.
3. Press [ENTER] to confirm or Press [MENU] to return to the main menu.
—
Main menu 2
With this function you can Manual adjust intensity
1. Select “MANL” by pressing [UP] or [DOWN] button.
2. Press [ENTER], the display shows“RED”, “GREN” , “BLUE” , “MACO” , “PROG” , “STRB” , “DIMM” ,
“ZOOM”.
3. Press [UP] or [DOWN] button to select“RED”, “GREN” , “BLUE” , “MACO” , “PROG” , “STRB” , “DIMM”
, “ZOOM”.
4. Press [ENTER] to confirm or Press [MENU] to return to the main menu.
- Main menu 3
1. Press [MENU] to enter the main menu (display flashing).
2. Press [UP] or [DOWN] button to select “TIME”.
-
Fixture running time
With this function you can display the running time of the device.
1. Select “LIFE” by pressing [UP] or [DOWN] button.
2. Press [ENTER], the display shows “XXXX”, “X” stands for the number of hours.
3. Press [ENTER] to confirm or Press [MENU] to return to the main menu.
- Clear fixture time
With this function you can clear the running time of the device.
1. Select “CLFE” by pressing [UP] or [DOWN] button.
2. Press [ENTER], the display shows “ON” or “OFF”.
3. Press [UP] to select “ON” if you wish to enable this function or press [DOWN] button to “OFF” if you
don’t.
4. Press [ENTER] to confirm or Press [MENU] to return to the main menu.
GB
Idea Par Led Zoom RGB XM368-V1.2 -B
13
-
Main menu 4
1. Press [MENU] to enter the main menu (display flashing).
2. Press [UP] or [DOWN] button to select “EDIT”.
- Define the number of steps in Run
With this function you can define the number of steps in the Program
Run.
1. Select “STEP” by pressing [UP] or [DOWN] button.
2. Press [ENTER], the display shows “S-XX”, “X” stands for the
total amount of steps you want to save, so you can call up to 48
scenes in “RUN”. For example if the “XX” is 05, it means that
“RUN” will run the first 5 scenes you saved in “EDIT”.
3. Press [ENTER] to confirm or Press [MENU] to return to the main
menu.
-Auto Save
With this function you can automatic save the number of steps in the
Program Run.
1. Select “REC” by pressing [UP] or [DOWN] button.
2. Press [ENTER], the display shows “RE.XX”, “XX” stands for the
number from 1 to 400.
3. Press [ENTER] to confirm or Press [MENU] to return to the main
menu.
- Editing the channels of the individual scenes
With this function you can edit the program to be called up in Run.
a) Editing via the Control Board
1. Select “SC01” by pressing [UP] or [DOWN] button.
2. Press [ENTER], the display shows “SCXX”, “X” stands for the scene no. to be edited.
3. Select the channel no. you would like to edit by pressing [UP] or [DOWN] button.
4. Adjust the desired DMX value by pressing [UP] or [DOWN] button.
5. Press [ENTER] in order to edit other channels of this scene.
6. Repeat steps 3-5 until you finish setting all the DMX values for all channels of this scene.
7. Once all the channels completed, the display will flash “TIME”
8. Press [ENTER] to edit the time needed, the display shows “TXXX” , “XXX” stands for the time needed
to run the current scene, value “001-999”. E.g., “002” means you need 0.4ms (002*0.2ms) to run the
current scene. Adjust the desired time by pressing [UP] or [DOWN] button.
9. Press [ENTER] to save the settings for the scene you are editing, the display will change to the next
scene automatically.
10. Repeat step 3-8 to edit and other scenes, you can edit and save a maximum of 48 scenes.
11. Press [MENU] to exit. The number of steps can be defined under “STEP” and the scenes can be called
up under “RUN”.
GB
XM368-V1.2 -B Idea Par Led Zoom RGB
14
b) Editing via the external controller
Call up the first scene in your controller now.
1. Press [ENTER], the display to be edited.
2. Select “SC01” by pressing [UP] or [DOWN] button.
3. Select the channel no. you would like to edit by pressing [UP] or [DOWN] button.
4. Press [ENTER], the display shows “C-01”.
5. Press [UP] or [DOWN] button .the display shows " FADE ".（Adjust fade speed）
6. Press [ENTER], the display to be adjust fade speed.
7. Select "CEDT" by pressing [UP] or [DOWN] button.
8. Press [ENTER], the display shows "OFF".
9. Press [UP] or [DOWN] button .the display shows "ON".
10. Press [ENTER], the display shows "SC02". You successfully downloaded the first scene.
11. Adjust the Step-time as described above under point 12.
12. Call up the second scene in your controller now.
13. Repeat steps 5-11 until all desired scenes are downloaded.
14. Press [MENU] to exit. The number of steps can be defined under “STEP” and the scenes can be called
up under “RUN”
GB
Idea Par Led Zoom RGB XM368-V1.2 -B
15
INSTRUCTIONS ON USE:
DMX channel´s functions and their values (8 DMX channels):
Channel
Value Function
Red :
1
0-255 Red ( 0-Black , 255-100% Red )
Green:
2
0-255 Green ( 0-Black , 255-100% Green )
Blue:
3
0-255 Blue ( 0-Black , 255- 100% Blue )
Color macros:
0 No function
1-7 Color macro 1
8-15 Color macro 2
16-23 Color macro 3
24-31 Color macro 4
32-39 Color macro 5
40-47 Color macro 6
48-55 Color macro 7
56-63 Color macro 8
64-71 Color macro 9
72-79 Color macro 10
80-87 Color macro 11
88-95 Color macro 12
96-103 Color macro 13
104-111 Color macro 14
112-119 Color macro 15
120-127 Color macro 16
128-135 Color macro 17
136-143 Color macro 18
144-151 Color macro 19
152-159 Color macro 20
160-167 Color macro 21
168-175 Color macro 22
176-183 Color macro 23
184-191 Color macro 24
192-199 Color macro 25
200-207 Color macro 26
208-215 Color macro 27
216-223 Color macro 28
224-231 Color macro 29
232-239 Color macro 30
240-247 Color macro 31
4
248-255 Color macro 32
GB
XM368-V1.2 -B Idea Par Led Zoom RGB
16
Internal programs:
0-10 Without internal program
11-40 Internal program 1
41-70 Internal program 2
71-100 Internal program 3
101-130 Internal program 4
131-160 Internal program 5
161-190 Internal program 6
191-220 Internal program 7
5
221-255 Gradient effect
Shutter, strobe:
0-31 Led trun off
32-63 Led turn on
64-95 Strobe effect slow to fast
96-127 Led turn on
128-159 Pulse-effect in sequences
160-191 Led turn on
192-223 Random strobe effect slow to fast
6
224-255 Led turn on
General dimming/speed:
0-255 Dimming( 0-Black , 255- 100% )
Speed from slow to fast /when running internal programs
7
Speed from slow to fast /when running gradient effect
Zoom:
8
0-255 Continuous adjustment from far to near
GB
Idea Par Led Zoom RGB XM368-V1.2 -B
17
INSTRUCTIONS FOR INSTALLING THE BARN-DOOR AND FROST FILTER
For this device, the barn door and the frost filter can be installed separately or together.
1. When only install the frost filter, use the rotating clips on the lens cover to fix it.
2. When only install the bar door, loose the 2 M4 screws on the lens cover, put on the bar door and tighten
the screws.
3. When install the bar door and frost filter together, loose the 2 M4 screws, put on the frost filter and the
bar door one by one, then tighten the screws.
Loose the 2 screws
CLEANING AND MAINTENANCE
The following points have to be considered during the inspection:
1) All screws for installing the devices or parts of the device have to be tightly connected and must not be
corroded.
2) There must not be any deformations on the housing, fixations and installation spots (ceiling,
suspension, trussing).
3) Mechanically moved parts must not show any traces of wearing and must not rotate with unbalances.
4) The electric power supply cables must not show any damage, material fatigue or sediments.
Further instructions depending on the installation spot and usage have to be adhered by a skilled installer
and any safety problems have to be removed.
CAUTION!
Disconnect from mains before starting maintenance operation.
In order to make the lights in good condition and extend the life time, we suggest a regular cleaning to the
lights.
1) Clean the inside and outside lens each week to avoid the weakneness of the lights due to accumulation
of dust.
2) Clean the fan each week.
3) A detailed electric check by approved electrical engineer each three month, make sure that the circuit
contacts are in good condition, prevent the poor contact of circuit from overheating.
Should you need any spare parts, please order genuine parts from your local dealer.
GB
XM368-V1.2 -B Idea Par Led Zoom RGB
18
TECHNICAL SPECIFICATIONS
Power supply: AC 100V-240V~，50 Hz / 60Hz
Power consumption: max. 120 W
Packing dimensions: 40 x 30 x 48 CM
Flight case dimensions: 79x76.5x60 cm
Net weight: 7 KGS
Gross weight: 10KGS（carton packing） 75.5 KGS(flight case packing/6pcs)
Remark: errors and omissions for every information given in this manual except. All information is subject
to change without prior notice.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
SGM Idea Par LED Zoom RGB Manuale utente
- Categoria
- Stroboscopi
- Tipo
- Manuale utente