Cobra MR HH150 FLT Manuale del proprietario

Cobra
Marca
Cobra
Modello
MR HH150 FLT
Categoria
Radio a due vie
Tipo
Manuale del proprietario
A1
English
Our Thanks to You and
Customer Assistance
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Introduction
Nothing Comes Close to a Cobra
®
English
Our Thanks to You
•
Thank you for purchasing a CobraMarine
®
VHF radio.
Properly used, this Cobra
®
product will give you
many years of reliable service.
How Your CobraMarine VHF Radio Works
This radio is a battery-powered portable transceiver for use afloat. It gives you
two-way vessel-to-vessel and vessel-to-shore station communications, primarily
for safety and secondarily for navigation and operational purposes. With it, you
can call for help, get information from other boaters, talk to lock or bridge tenders,
and make radiotelephone calls to anywhere in the world through a marine operator.
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Customer Assistance
©2019 Cobra Electronics Europe Limited
www.cobra.com
FLOATING VHF MARINE RADIO
MRHH150FLTE
Printed in China Part No. 480-1198-P Version A
Owner’s Manual
Customer Assistance
•
Should you encounter any problems with this product, or not understand
its many features, please refer to this owner’s manual. If you require further
assistance after reading this manual, please contact your local dealer.
There is no restriction on the EU region for
Transmit Frequency: 156.025 - 157.425 MHz
Receive Frequency: 156.050 - 163.275 MHz
For Warranty, Product Service and Accessory Information
Please contact your local dealer or distributor.
See www.cobra.com for a list of CobraMarine international distributors.
Adapter: ASSA55W-120040
Aquil Star Precision Industrial (Shenzhen) Co., Ltd.
Car Charger: 12V, 1000mA
Shenzhen Nuo Heng Yuan Technology Co., Ltd.
Battery: CEL 523450
Jiangsu CEL Battery Co., Ltd
Memory Channel Icon
FLOATING MARINE HH150
ESC SETUP
PWR
MEM
H-M-L
ENTER
CHANNEL
SC/DW
16+
VOL
VOL
+
SUBMERSIBLE
FLOATING MARINE HH150
ESC SETUP
PWR
MEM
H-M-L
ENTER
CHANNEL
SC/DW
16+
VOL
VOL
+
SUBMERSIBLE
A3
English
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Introduction
A2
English
Radio Controls
and Indicators
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Introduction
Backlit LCD (Liquid Crystal Display) Screen
•
Instant Channel
16/9
External Speaker/
Microphone Jack
Antenna
Backlit
LCD
Screen
Battery
Compartment
Backlight/
Key Lock
Memory/
Escape
Push to Talk
UIC Active Channel Map Icons
Dual Watch Icon
Battery Power Icon
Button Lock Icon
Key Tone Icon
Scan Icon
Active Channel Numbers
Speaker
Power Settings
Select 0.5, 1 or 3 watts of output power
for near or distant calling.
International/Canada Channels/USA
Operate on any of the three different channel
maps set up for these areas.
Submersible
Meets JIS7/IPX7 waterproof standards.
Key Lock
Prevents accidental setting changes
when key lock is set.
Channel Scan/Memory Scan
Scan through all or memorized channels to
find conversations in progress.
Instant Channel 16/9
Provides instant access to priority Channel
16 and calling Channel 9.
Dual-Watch
Use to monitor two (channels at once – Channel
16 and one user selected channel.
Roger Beep Tone (Selectable)
Confirmation tone indicates the completion of
the user’s transmission and signals to others
it is clear to talk. On or Off selectable.
Rechargeable NiMH (Nickel-Metal Hydride)
Batteries
Five rechargeable NiMH batteries supplied
with the unit provide extended operating
time and have no memory effect. Five AAA
alkaline batteries may also be used for
emergency backup power.
12V Power Cord Included
Charge the NiMH batteries in a car or boat.
Speaker/Mic Jack
Allows connecting optional Cobra Lapel
Speaker/Mic.
Memory Channels
Allows programming of up to ten VHF
memory channels.
Signal Strength Meter
Shows the strength of incoming
or outgoing signals.
Illuminated Buttons
Allows high visibility of all function buttons.
Product Features
•
Belt Clip
Engagement
Microphone
Low/Med/High Power Icons
Battery Door
Simplex Operation Icon
Backlit LCD Screen
and Product Features
Roger Beep Icon
Power Level
Enter/Setup
Dual Watch/
Scan
Channel Up/Down
Signal Strength Icon
Broadcast Receive Icon
Squelch
Defeat
Charge Jack
Wrist Strap
Connector
Volume Up/ Down
Receive & Transmit Icons
Introduction
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
1
Nothing Comes Close to a Cobra
®
Table of Contents
Introduction
Our Thanks to You ......................................................................................... A1
Customer Assistance ..................................................................................... A1
Radio Controls and Indicators ....................................................................... A2
Backlit LCD (Liquid Crystal Display) Screen .................................................. A3
Product Features ........................................................................................... A3
Important Safety Information ............................................................................ 2
Marine Communication and Radio Procedures ................................................. 4
Licensing Information & Electrical Equipment Disposal.................................... 5
Installation
Included in this Package ................................................................................... 6
Wrist Strap, Belt Clip and External Speaker/Mic ............................................... 7
Installing, Charging and Maintaining Batteries ................................................. 8
Operating Your Radio
Getting Started ................................................................................................ 10
Setup Mode Programming............................................................................... 14
Standby, Receive and Transmit ....................................................................... 18
Advanced Operation ........................................................................................ 21
Maintenance .................................................................................................... 27
Troubleshooting ............................................................................................... 27
VHF Marine Radio Protocols
VHF Marine Radio Procedures ......................................................................... 28
Voice Calling .................................................................................................... 30
Radiotelephone Calls ....................................................................................... 31
Emergency Messages and Distress Procedure ............................................... 32
Warranty and Trademark
Limited 1-Year Warranty ................................................................................. 35
Trademark Acknowledgement ........................................................................ 35
Customer Service
Product Service ............................................................................................... 36
Specifications .................................................................................................. 37
Appendix – English/Español
VHF Marine Channel Assignments .................................................................. 38
Accessories ..................................................................................................... 56
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
3
Nothing Comes Close to a Cobra
®
2
English
Important Safety Information
Introduction
Important Safety Information
Industry Canada Antenna Notice
Under Industry Canada regulations, this radio transmitter may only operate using an
antenna of a type and maximum (or lesser) gain approved for the transmitter by
Industry Canada. To reduce potential radio interference to other users, the antenna type
and its gain should be so chosen that the equivalent isotropically radiated power
(e.i.r.p.) is not more than that necessary for successful communication.
Avis d’antenne du Canada d’industrie
En vertu de la réglementation de l’industrie du Canada, cet émetteur de radio ne peut
fonctionner à l’aide d’une antenne d’un type et un maximum (ou moins) Gain approuvé
pour l’émetteur par Industrie Canada. Pour réduire le risque d’interférence aux autres
utilisateurs, le type d’antenne et son gain doivent être choisis afin que la puissance
isotrope rayonnée équivalente (PIRE) ne dépasse pas ce qui est nécessaire pour une
communication réussie.
Important Safety Information
•
Before using your CobraMarine
®
VHF radio, please read these general precautions
and warnings.
Warning and Notice Statements
To make the most of this radio, it must be used properly. Please read the operating
instructions carefully before using the radio. Special attention must be paid to the
WARNING and NOTICE statements in this manual.
WARNING
Statements identify conditions that could result in personal injury or loss of life.
NOTICE
Statements identify conditions that could cause damage to the radio
or other equipment.
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Introduction
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Introduction
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
General Precautions
•
The following WARNINGS and NOTICE information on the following page will make you
aware of RF exposure hazards and how to assure you operate the radio within the CE
RF exposure limits established for the radio.
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
WARNINGS
Your radio generates electromagnetic RF (radio frequency) energy when it is
transmitting. To ensure that you and those around you are not exposed to excessive
amounts of that energy, DO NOT touch the antenna when transmitting. KEEP the radio
at least two inches (5 cm) away from yourself and others when transmitting. DO NOT
transmit more than 50% of the time the radio is in use — 40% duty cycle. The radio is
transmitting when the Talk button is pressed and the transmit information shows on the
LCD screen.
ALWAYS use only Cobra authorized accessories.
NEVER connect the transceiver to AC power. It can be a fire hazard, may cause an
electric shock, and may damage the transceiver.
NEVER mount the transceiver or microphone where they might interfere with operation
of your vessel or cause injury.
DO NOT allow children or anyone unfamiliar with proper procedures to operate the radio
without supervision.
Failure to observe any of these warnings may cause you to exceed
FCC, Industry Canada or EU RF exposure limits or create other dangerous conditions.
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
WARNING
The device complies with RF specifications when the device is used at 25mm from
your front face and 0mm from your body.
Maximum SAR Value:
0.452 W/Kg (50% duty to face 10g)
0.795 Ww/Kg (50% duty to body 10g)
0.413 W/Kg (50% duty to face 1g)
0.975 W/Kg (50% duty to body 1g)
Introduction
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
5
Nothing Comes Close to a Cobra
®
4
English
Marine Communication,
Procedures & LicensingMarine Communication
Introduction
Introduction
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Recommendations for Marine Communication
•
The frequencies your radio uses are set aside to enhance safety afloat and for
vessel navigation and operational messages over a range suitable for nearshore
voyages. If the 3 watt maximum output of your radio isn’t sufficient for the
distances you travel from the coast, consider installing more powerful radio
equipment such as HF single side band or satellite radio for your vessel.
The coastguard does not endorse mobile phones as substitutes for
marine radios. They generally cannot communicate with rescue vessels and,
if you make a distress call on a mobile phone, only the party you call will
be able to hear you. Additionally, mobile phones may have limited coverage
over water and can be hard to locate. If you don’t know where you are, the
coastguard will have difficulty finding you if you’re using a mobile phone.
However, mobile phones can have a place on board where mobile coverage
is available — to allow social conversations and keep the marine frequencies
uncluttered and available for their intended uses.
Licensing Information
This CobraMarine radio incorporates a VHF FM transceiver designed for use in the
frequency range of 156.025 to 163.275 MHz. It requires 6 volts DC and has a
switchable RF output power of 0.5, 1 or 3 watts.
The radio operates on all currently allocated marine channels and is switchable for
use according to International, Canadian, or U.S.A. regulations. It features instant
access to emergency Channel 16 by pressing one key.
CobraMarine
®
VHF radios comply with the U.S. FCC (Federal Communications
Commission) requirements that regulate the Maritime Radio Service.
Station License
The UK requires a ships radio license and a marine radio operators certificate before
transmitting equipment can be used aboard a vessel. Other European countries have
specific requirements of their own.
For detailed information and applications, contact the Royal Mail Licensing Centre
in the UK. In other countries contact the local equivalent of the UK Royal Mail or
the national telecommunications authority.
Canadian or U.S.A. Station License
If your vessel will be entering the sovereign waters of Canada or the U.S.A., you
should contact Industry of Canada, Radio Regulatory Branch or the U.S. Federal
Communications Commission for licensing and operating information.
Radio Call Sign
A radio call sign is included as part of the ships radio license in the UK.
Other countries may have different practices; contact your local regulatory
authority for information.
User Responsibility And Operating Locations
All users are responsible for observing domestic and foreign government regulations
and are subject to severe penalties for violations. The VHF frequencies on your radio
are reserved for marine use and require a special license to operate from land,
including when your boat is on its trailer.
NOTICE
Your radio is waterproof only when the batteries are properly installed.
AVOID using or storing the radio at temperatures below -4° F (-20° C) or above
140° F (60° C).
KEEP your radio at least 3 ft (0.9 m) away from the vessel’s magnetic navigation
compass.
DO NOT attempt to service any internal parts yourself. Have any necessary service
performed by a qualified technician.
This radio is supplied with NiMH (Nickel-Metal Hydride) rechargeable batteries.
• Use only the Cobra power cord to recharge NiMH batteries in the radio.
• Do not short circuit the batteries.
• When replacing the batteries, dispose of the old batteries properly. The NiMH
batteries may explode if disposed of in a fire.
• Do not attempt to operate your radio while recharging the batteries.
•
Do not use batteries other than Cobra NiMH or Alkaline batteries of the correct type.
There is a risk of explosion if the batteries are replaced by an incorrect type.
Compatible replacement NiMH batteries are available from Cobra.
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Changes or modifications to your radio MAY VOID its compliance with FCC (Federal
Communications Commission) rules and make it illegal to use.
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Disposal of Old Electrical or Electronics Equipment
This product may contain hazardous substances that could impact health and the
environment if not disposed of properly.
The crossed out wheeled bin symbol indicates that the product should not
be disposed of along with household waste. It should be handed over to
an applicable collection point for the recycling of electrical equipment. By
ensuring that this product is disposed of correctly you will help/prevent
potential negative impact on the environment.
If you need more information on the collection, reuse and recycling systems, please
contact your local civic office or the shop where it was originally purchased.
7
Nothing Comes Close to a Cobra
®
6
English
Licensing (continued) &
Included in this Package
Wrist Strap, Belt Clip
and External Speaker/Mic
Included in this Package
•
You should find all of the following items in the package with your CobraMarine VHF radio.
Wrist Strap and Belt Clip
•
Wrist Strap
The radio comes with the wrist strap already attached.
It can be easily removed if you choose not to use it.
Belt Clip
Use the spring-loaded belt clip to carry the radio on your
person.
1. Slide the belt clip into the guide channel on the back of the
radio until it is locked in place.
2. To attach the wrist strap, insert it through the hole at the
top of the belt clip, feed it through the looped end and pull
tight to secure to the belt clip.
3. Press open the belt clip, slide it over the belt and release
the clip.
4. To remove the belt clip from the radio press the tab on the
belt clip, which unlocks the clip, and slide it out.
External Speaker/Microphone Jack
•
Your radio can be fitted with an optional External Speaker/
Microphone (not included), freeing your hands
for other tasks. Contact your local CobraMarine
®
dealer
or Cobra
®
directly for optional accessories.
To attach the external speaker/microphone:
1. Open the speaker/microphone tab on top
of the radio.
2. Insert the plug into the speaker/microphone jack.
VHF Marine Radio Protocols
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Installation
Wrist Strap
Insert Belt Clip onto Radio
FLOATING MARINE HH150
ESC WEATHER SETUP
PWR
MEM
H-M-L
ENTER
Removing the Radio
Secure Radio
VHF Marine Radio Protocols
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Installation
Speaker/Microphone Jack
Canadian Ship Station License
You need a Radio Operator’s Certificate if your vessel is operated in Canadian waters.
Radio Operator training and certification is available from the Canadian Power
Squadron. Visit their website at http://www.cps-ecp.ca/.
User Responsibility and Operating Locations
All users are responsible for observing domestic and foreign government regulations
and are subject to severe penalties for violations. The VHF frequencies on your radio
are reserved for marine use and require a special license to operate from land,
including when your boat is on its trailer.
NOTE
This device complies with part 15 of the FCC Rules, and Industry Canada
license-exempt RSS standards. Operation is subject
to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference
that may cause undesired operation.
FCC Warning: Replacement or substitution of transistors, regular diodes or other
parts of a unique nature, with parts other than those recommended by Cobra
may cause a violation of the technical regulations of part 80 of the FCC Rules, or
violation of type acceptance requirements of part 2 of the rules.
FLOATING MARINE HH150
ESC SETUP
PWR
MEM
H-M-L
ENTER
CHANNEL
SC/DW
16+
VOL
VOL
+
SUBMERSIBLE
Radio
FLOATING MARINE HH150
ESC WEATHER SETUP
PWR
MEM
H-M-L
ENTER
CHANNEL
SC/DW
+16
VOL
VOL
SUBMERSIBLE
Wrist Strap
12V Power Cord
5 Rechargeable NiMH Batteries
Operating Instruction Manual
Spring-Loaded Belt Clip
For connection to 12-volt
power sources.
VHF Marine Radio Protocols
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
VHF Marine Radio Protocols
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
9
Comes Close to a Cobra
®
8
English
Batteries and Charging Batteries and Charging
Batteries and Charging
•
The radio is is shipped with five NiMH rechargeable batteries.
WARNING
The 12V power cord supplied with this radio is only
to be used with its rechargeable batteries. Do not
attempt to charge any other type of batteries in the
radio as fire, explosion or battery damage will occur.
Rechargeable battery life will be prolonged if extreme
ambient temperatures are avoided.
When your rechargeable batteries begin to discharge too
quickly, it is time to install new batteries. Your radio will also
operate with five (high-quality AAA alkaline batteries.
Installing the Batteries
Install the AAA batteries in the slots in the battery
compartment with the batteries oriented according
to the polarity (+ & -) marks in the slots.
Initial Charge
The Cobra-provided NiMH batteries may be charged in a car
or boat using the appropriate 12V power cord.
1. Insert the power cord into the side of the radio.
2. Insert the other end of the power cord into a 12V power
source.
3. Observe that the red light on the power cord glows to
indicate that power is present.
4. Allow the batteries to charge for 12 to 14 hours before use.
WARNING
Only the rechargeable NiMH batteries can be
recharged. You MUST use the charging device provided
with this radio. Do not substitute any other type of
charging adapter. Battery damage, fire or explosion
may result. It is equally important to prevent the NiMH
batteries from freezing to obtain best performance
from them.
Install Batteries
Power Source
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
To Remove Batteries from Radio
1. Loosen the 2 screws on the back of the battery door.
2. Pull the individual batteries out of the radio housing.
NOTICE
NiMH batteries are toxic. Please dispose of properly.
Some marine suppliers accept old batteries for
recycling and some municipal waste disposal agencies
have special provisions for battery disposal.
Locking Tab
Maintaining the Battery Charge
As you use your radio, the battery power icon will show the
battery power remaining. When the icon begins to flash, it is
time to recharge or change the batteries.
NOTICE
Use only the 12V power cord provided by Cobra. Do
not use the power cord with alkaline batteries; only
the NiMH batteries are rechargeable. Spent alkaline
batteries must be discarded and replaced.
It is a good idea to keep a set of fresh, high-quality AAA
alkaline batteries with your radio. Should the rechargeable
batteries become discharged and no electrical power source
be available, you can insert fresh alkaline batteries and
continue to use your radio.
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Install Batteries
Fully Charged
Partially Charged
Fully Discharged
FLOATING MARINE HH150
ESC SETUP
PWR
MEM
H-M-L
ENTER
CHANNEL
SC/DW
16+
VOL
VOL
+
SUBMERSIBLE
VHF Marine Radio Protocols
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Operating Your Radio VHF Marine Radio Protocols
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Operating Your Radio
11
Nothing Comes Close to a Cobra
®
10
English
Getting Started Getting Started
Getting Started
•
Refer to the foldout at the front of this manual to identify the
various controls and indicators on your radio. Throughout this
manual you will be instructed to “Press” or to “Press and
Hold” various buttons (except “Push to Talk”) on the radio.
“Press” means a momentary press of approximately one
second. “Press and Hold” means to hold the button down for
approximately three seconds.
Whenever you press any button except the Talk button on
your radio, a brief tone (beep) will sound to confirm the
button press. With all button presses, the appropriate icon
will appear on the LCD and the backlight will turn On. The
backlight will stay On for 10 seconds after the button is
released.
At times, you will hear two other sounds. Two beeps will
sound to confirm your setting changes and three beeps will
sound to notify you of an error.
Common Radio Functions
The following procedure defines common operating functions of the radio when in
Standby mode.
Power Button
Power On/Off Button
The On/Off Button control is located at the front left side of
the radio. Pressing and holding the power On/Off button for 3
seconds will turn the radio On or Off.
Power Saver
Your radio has a unique circuit designed to extend battery life.
If there are no transmissions, signals, or button presses for
ten seconds, the radio will automatically switch to Power Save
mode. Signal reception or any button press will take the radio
out of Power Save mode.
Volume Control
Volume is controlled by the Up/Down volume buttons.
n To increase the volume, press the Volume + button.
n To decrease the volume, press the Volume - button.
Radio Speaker and Microphone
The internal Radio Speaker and Microphone are located on the
bottom front face of the radio below the lower control buttons.
An optional Speaker/Microphone jack is located at the top of
the radio. Flip the protective cap open and insert the plug into
the jack.
Talk Button
Press and hold the Talk button to transmit messages.
Release the Talk button to stop transmitting. If the Talk
button is pressed while on a receive only channel, a three
beep error signal will sound.
Squelch Control
This radio is equipped with an automatic squelch control.
Squelch filters weak signals and radio frequency (RF) noise so
you can hear the main signal clearly.
To receive weak signals, the automatic squelch can be turned
Off (opened) by pressing the Squelch Defeat button. You will
likely hear a lot of static and RF noise along with the weak
signal.
Press the Squelch Defeat button for up to five seconds to briefly
open squelch. To hold squelch open for longer periods, press
and hold the Squelch Defeat button for more than five seconds.
Squelch will remain open until you press the Squelch Defeat
button again or you change channels.
Squelch Control
Talk Button
Power On/Off Button
FLOATING MARINE HH150
ESC SETUP
PWR
MEM
H-M-L
ENTER
CHANNEL
SC/DW
16+
VOL
VOL
+
SUBMERSIBLE
MR HH150FLT Radio
Speaker/Microphone Jack
VHF Marine Radio Protocols VHF Marine Radio Protocols
13
Nothing Comes Close to a Cobra
®
12
English
Getting Started Getting Started
Backlight/Key Lock Button
The LCD will be illuminated by the backlight as long as any
button is pressed and will remain On for 10 seconds after the
button is released.
To Display the Backlight Momentarily:
Press the Backlight/Key Lock button. The backlight will
remain On for 10 seconds. If the backlight is already On,
a press of the Backlight/Key Lock button will turn it Off.
Key Lock
To prevent accidental changes to your settings, you can lock
all of the buttons on the front of the the radio along with the
Squelch Defeat button.
To Lock or Unlock the Buttons:
Press and hold the Backlight/Key Lock button for two
seconds. The Key Lock icon will appear or disappear in
the LCD. When Key Lock is On, pressing any of the buttons
on the front of the radio will result in a three beep error
message.
Both the Backlight/Key Lock button and the Talk button are
active — you can Receive (Rx) or Transmit (Tx) a message
with Key Lock On, but you cannot change the channel.
Channel Up/Down Buttons
Your radio will Receive (Rx) and Transmit (Tx) VHF signals on
the channel indicated on the LCD display. You can change the
channel at any time using the Channel Up/Down buttons.
To Change Channels:
Press the Channel Up/Down buttons.
If you are on Channel 88, pressing the Channel Up button
will advance to Channel 01. If you are on Channel 01,
pressing the Channel Down button will advance to 4 digit
channel.
You can press and hold the Channel Up/Down button for
fast advance. The beep sound will occur only at the first
press of the buttons and not during fast advance.
If the new channel selected is restricted to low power, the
radio will automatically switch to Low Power mode and the
Low Power icon will appear on the LCD.
If the radio is in the Key Lock mode, the channel will not
change and the three beep error signal will sound.
SCAN Button
Press and hold the SCN button to scan all channels.
The SCAN icon will display on the LCD display. Scanning begins
at lower channels, and scans to higher channels. Press Channel
Up/Down button to change the scan direction.
When a signal is received in SCAN mode, the radio will pause
10 seconds before resuming SCAN operation.
The scan will stop when the Talk button is pressed.
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
NOTE
Memory channels need to be saved to effectively enter the Memory Channel mode
and scan all memory channels. See page 25.
High/Medium/Low (HI/MED/LO) Power Button
Your radio can transmit selectively at .5, 1 or 3 watts of power.
Cobra suggests you maintain the low power setting for short-
range communication. You will conserve battery life and avoid
overpowering nearby stations by using a low power signal. Use
the High Power 3 watt setting for long-range communications or
when you do not receive a response to a signal sent at .5 or 1 watt.
To Toggle Between Hi/Med/Lo Power Modes:
Press the H-M-L button. The LCD will show which mode is in
effect. Some channels are restricted for a maximum use of 1 watt.
Your radio will automatically set the power to Medium Power mode
when you select those channels.
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
NOTE
Some channels, frequency bands and countries of use might not be able to operate in
High Power mode.
FLOATING MARINE HH150
ESC SETUP
PWR
MEM
H-M-L
ENTER
CHANNEL
SC/DW
16+
VOL
VOL
+
SUBMERSIBLE
Key Locked Buttons
Key Lock Icon
FLOATING MARINE HH150
ESC SETUP
PWR
MEM
H-M-L
ENTER
CHANNEL
SC/DW
16+
VOL
VOL
+
SUBMERSIBLE
Scan Button
FLOATING MARINE HH150
ESC SETUP
PWR
MEM
H-M-L
ENTER
CHANNEL
SC/DW
16+
VOL
VOL
+
SUBMERSIBLE
Channel Up/Down Buttons
FLOATING MARINE HH150
ESC SETUP
PWR
MEM
H-M-L
ENTER
CHANNEL
SC/DW
+16
VOL
VOL
SUBMERSIBLE
Currently On Channel 88
FLOATING MARINE HH150
ESC SETUP
PWR
MEM
H-M-L
ENTER
CHANNEL
SC/DW
16+
VOL
VOL
+
SUBMERSIBLE
HI/MED/LO Power Button
VHF Marine Radio Protocols
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Operating Your Radio VHF Marine Radio Protocols
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Operating Your Radio
Backlight/Key Lock Button
VHF Marine Radio Protocols VHF Marine Radio Protocols
15
Nothing Comes Close to a Cobra
®
14
English
Setup Mode Programming Setup Mode Programming
International/Canada/U.S.A. Channel Maps
Three sets of VHF Channel Maps have been established for marine use in the U.S.A.,
Canada, and the rest of the world (International). Most of the channels are the same
for all three maps, but there are definite differences (see table in the Appendix).
Your radio has all three maps built into it and will operate correctly in whichever
area you choose.
To Set Channel Map Operating Area:
1. The Channel Map mode is the first mode that begins the
Marine (VHF) Setup programming.
2. U, I and C will display, with the current setting
(the U icon is the default) flashing.
3. Press Channel Up/Down buttons to select the
U, I or C icon.
4. Press Enter/Setup button to save this entry and move to the
next setup programming mode.
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
NOTE
One or two of the channel maps might have been
disabled for sales of this radio in some countries.
Active Channel Map Icon
FLOATING MARINE HH150
ESC WEATHER SETUP
PWR
MEM
H-M-L
ENTER
CHANNEL
SC/DW
+16
VOL
VOL
SUBMERSIBLE
Set Channel Map
FLOATING MARINE HH150
ESC SETUP
PWR
MEM
H-M-L
ENTER
CHANNEL
SC/DW
16+
VOL
VOL
+
SUBMERSIBLE
Enter/Setup Button
FLOATING MARINE HH150
ESC SETUP
PWR
MEM
H-M-L
ENTER
CHANNEL
SC/DW
16+
VOL
VOL
+
SUBMERSIBLE
Channel Up/Down Buttons
VHF Marine Radio Protocols
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Operating Your Radio VHF Marine Radio Protocols
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Operating Your Radio
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Programming these features will allow you to customize certain features of this radio
to enhance your “On-Water” audio needs.
Start from Marine Standby mode to begin Marine (VHF) Setup
programming. Press and hold the Enter/Setup button for three
seconds to enter the programming mode.
Marine (VHF) Mode Programming
Roger Beep Mode
In Roger Beep mode, your listener will hear an audible tone
when you release the Talk button. This alerts your listener
that you are finished talking and it is OK for them to speak.
To Set Roger Beep On or Off:
1. Press and hold the Setup button for 3 seconds.
2. Press Channel Up/Down buttons to select ON or OFF. ROG
will be displayed when On.
3. Press Enter/Setup button to save this entry and move to the
next setup programming mode – Key Tone.
Roger Beep Mode
Setup Mode Programming
•
The following series of procedures is designed to allow you to set the programmable
features of your radio. Correctly following these steps results in a minimal amount of
radio setup programming time.
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
NOTE
When in the Setup mode, if you stop programming for longer than 10
seconds, your entry will be saved and the radio will go back to the Marine
Standby mode. Pressing any of the non-programming buttons (Talk, Dual-
Watch/Scan, H-M-L, Instant Channel 16+) will also exit Setup mode and
invoke the button function or return the radio to Marine Standby mode.
When you return to Setup mode and continue programming you will see the last
“value” displayed. While in the Setup mode, you will not receive any signal reception.
VHF Marine Radio Protocols
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Operating Your Radio VHF Marine Radio Protocols
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Operating Your Radio
17
Nothing Comes Close to a Cobra
®
16
English
Setup Mode Programming
Key Tone Mode
In Key Tone mode, an audible tone will sound each time a
button is pressed or you change a setting.
To Set Key Tone On or Off:
1. Press and hold the Setup button for 3 seconds.
2. Press Channel Up/Down buttons to select
ON or OFF.
3. Press Enter/Setup button to save all entries.
ATIS
ATIS is required in some countries when navigating inland
wayer ways. The nine digit ATIS number, similar to a telephone
number, is a unique identifier for a vesel. To obtain an ATIS
number, please contact your country’s telecommunication
authority or ship registry issuing agency. Consult your local
dealer for questions about local ATIS requirements.
NOTE
An ATIS number can only be programmed into your VHF
radio by an authorized Cobra dealer using special software.
ATIS Mode
ATIS mode allows control over ATIS packet transmissions.
This mode is only visible after initial ATIS set-up by a Cobra
dealer
.
To select the ATIS On/ Off screen:
1. Enter the Set Up menu and scroll to ATIS.
2. Press the ENTER soft key and observe the current ATIS
setting - ON or OFF.
3. Use the Up/Down buttons to switch to the setting
you want.
4. Press the ENTER soft key to save the setting.
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
NOTE
Scan and Dual Watch features are not available when
ATIS is on.
You have now ended Marine (VHF) Setup programming mode
and will enter Marine Standby mode.
Key Tone Mode
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Standby, Receive
and Transmit
Standby, Receive and Transmit
•
Marine Standby and Receive (Rx) Mode
Marine Standby mode is the default mode for the radio whenever it is turned On.
From this mode, you can change current settings by becoming familiar with the
different key functions that are active in Marine Standby mode. While in Marine
Standby mode, the user will be able to transmit by pressing the Push to Talk (Talk)
button. Users will hear signals on the selected channel(s) in Receive (RX) mode and
can hear alerts broadcast by the Coast Guard.
NOTE
Coast Guard alerts are broadcast on Channel 16. While in Marine Standby mode,
you will receive any messages sent on the channel to which you are tuned.
Transmit (Tx) Mode
Transmit (Tx) mode gives you the ability to interact with safety services, other vessels
and shore stations. When you use this capability, be sure to follow the procedures and to
observe the courtesies that govern its use so everyone benefits. See Appendix to help
you select the proper channels.
To Transmit a Message:
1. Check to see that your radio is set to a proper channel for
the type of message you plan to send.
2. Toggle to the Low Power setting for a nearby station.
3. With the microphone about 2 in. [51 mm] from your mouth,
press and hold the Talk button and speak into the microphone.
The Transmit icon will appear on the LCD.
4. Release the Talk button when you are finished
speaking. Your radio can only operate in either
Transmit (Tx) or Receive (Rx) mode at any
given time. You will not hear the response to
your message unless the Talk button is released.
If the Battery Power icon begins blinking on the
LCD when the Talk button is pressed, the radio
will NOT transmit.
Low Power Mode
Check Channel Number
Transmit
NOTE
If the Talk button is held down for five minutes, the
radio will automatically sound a series of beeps
and cease transmitting to prevent unwanted signal
generation and battery drain. As soon as the Talk
button is released, it can be pressed again to
resume transmission.
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Talk Button
Receive
ATIS Mode
FLOATING MARINE HH150
ESC SETUP
PWR
MEM
H-M-L
ENTER
CHANNEL
SC/DW
16+
VOL
VOL
+
SUBMERSIBLE
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
VHF Marine Radio Protocols
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Operating Your Radio VHF Marine Radio Protocols
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Operating Your Radio
19
Nothing Comes Close to a Cobra
®
18
English
Advanced Operation
Advanced Operation
•
Several capabilities of your radio can add to its versatility and ease of use even though
they are not needed for its basic operation.
Channel 16/9 Mode
Channel 16+ mode gives you quick access to calling on Channel 16 and Channel 9
from any operational mode.
To Switch to Channel 16 or Channel 9:
1. Press the Channel 16+ button to change
to Channel 16.
2. Press the Channel 16+ button again to change
to Channel 9.
3. Press the Channel 16+ button a third time and return to
the last used Marine Standby channel.
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
NOTE
This key is labeled as “16+” for maximum visibility.
FLOATING MARINE HH150
ESC SETUP
PWR
MEM
H-M-L
ENTER
CHANNEL
SC/DW
16+
VOL
VOL
+
SUBMERSIBLE
Channel 16+ Button
Channel 16
Channel 9
Advanced Operation
Dual-Watch Scan Mode
Dual-Watch Mode
Dual-Watch mode gives you one button access to scan a total of two channels of most
importance to you. Channel 16 is preprogrammed and will always be one of the scanned
locations. The other channel can be any marine VHF channel of your choice.
Using Dual-Watch
1. In Marine Standby mode, select the desired channel for
Dual-Watch scanning.
2. Press the Dual-Watch button. The DW icon will appear
on the LCD display and the radio will scan channel 16
and the selected channel.
3. A signal on any one of the two channels will
stop the scan for 10 seconds to allow you to listen
to the traffic on that location.
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
NOTE
After the Dual-Watch scan stops to monitor a channel,
as long as you do not press any buttons within 10
seconds, your radio will automatically resume scanning
the Dual-Watch channels.
4. Press the Channel Up or Channel Down buttons
to resume scanning the Dual-Watch channels or
to change the scan direction.
5. To EXIT the Dual-Watch scan, press the Dual-Watch button
again. The DW icon will disappear from the
LCD and the radio will return to Marine Standby mode.
NOTE
Dual-Watch also functions with a Memory channel.
FLOATING MARINE HH150
ESC SETUP
PWR
MEM
H-M-L
ENTER
CHANNEL
SC/DW
16+
VOL
VOL
+
SUBMERSIBLE
DUAL-WATCH Button
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
VHF Marine Radio Protocols
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Operating Your Radio VHF Marine Radio Protocols
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Operating Your Radio
21
Nothing Comes Close to a Cobra
®
Advanced Operation
20
English
Advanced Operation
To enter Memory mode, press Memory/Escape button. The
display will show the MEM icon and the Memory Channel
bank will be activated and displayed.
To Program Memory Locations:
1. Press and hold the Memory/Escape button for
two seconds. The memory location number
will start flashing.
2. Use the Channel Up and Channel Down buttons to advance
to the memory location (0-9) you want to program.
3. Press the Memory/Escape button to select the
memory location. The memory channel number
will stop flashing and the channel number will
start flashing.
4. Use the Channel Up and Channel Down buttons
to change to the channel you want to store into the
selected memory location.
5. Press the Memory/Escape button to program that
channel. The memory location number will flash again.
Repeat steps 2 through 5 to program as many additional
memory locations as you want [up to ten VHF memory
channels].
6. Press and hold the Memory/Escape button for two
seconds. This will return the radio to Memory mode.
7. Press and release the Memory/Escape button again to
return to Marine
Standby mode.
FLOATING MARINE HH150
ESC SETUP
PWR
MEM
H-M-L
ENTER
CHANNEL
SC/DW
16+
VOL
VOL
+
SUBMERSIBLE
MEM/ESC Button
Memory Location Number
FLOATING MARINE HH150
ESC SETUP
PWR
MEM
H-M-L
ENTER
CHANNEL
SC/DW
16+
VOL
VOL
+
SUBMERSIBLE
Channel Up/Down Buttons
Channel Number
Memory Location Mode
Your radio has ten memory locations (numbered 0 to 9) for your most frequently used
channels. These memory locations can be selected individually or can be scanned.
To Recall a Stored Memory Location:
1. Press the Memory/Escape button. The MEM icon will be
turned On.
2. Press the Channel Up or Channel Down button to select
the memory location. If a memory location has been
programmed, its associated channel will display on the
LCD. Your radio is now in Marine Standby mode on the
selected memory location.
To Exit Memory Location Mode:
Press the Memory/Escape button to return the radio
to Marine Standby mode. The last channel used in Marine
Standby mode will now be displayed on the
LCD and the MEM icon will disappear.
To Erase Stored Memory Locations:
1. Press and hold the Memory/Escape button for two
seconds. The memory location number will start flashing
and the MEM icon will be turned On.
2. Use the Channel Up and Channel Down buttons to advance
to the memory location you want to erase.
3. Press the Memory/Escape button to select the memory
location. The memory channel number will stop flashing
and the channel number will start flashing.
4. Use the Channel Up and Channel Down buttons to change
the channel to read “
--” at the selected memory location.
5. Press the Memory/Escape button to erase that memory
location.
Repeat steps 2 through 5 to erase as many additional memory
locations as you want.
6. Press and hold the Memory/Escape button for two seconds.
This will return the radio to Memory mode.
7. Press and release the Memory/Escape button again
to return to Marine Standby mode.
MEM Icon
Memory Location Scan Mode
During Memory Location Scan mode, the radio will rapidly
scan through all programmed memory channels. Whenever
any activity is detected on a channel, the radio will stop the
scan for 10 seconds to allow you to listen briefly on that
channel. It will then continue to scan unless you switch out of
Memory Location Scan mode.
NOTE
If there are fewer than two memory locations programmed
in the radio, the Memory Location Scan option will not
be available. At least two memory locations need to be
programmed to use the Scan button.
To Enter Memory Location Scan:
1. From Marine Standby mode, press the Memory/Escape
button.
2. Press and hold the DUAL WATCH/SCAN button.
The radio will immediately begin to scan all pre-assigned
memory channels. The SCAN and MEM icons will show on
the LCD.
3. A signal on any channel will stop the scan for
10 seconds to allow you to listen to the traffic
on that location.
4. Press the Channel Up or Channel Down button
to resume scanning the Memory Location Scan
channels or to change the scan direction.
5. To EXIT Memory Location Scan mode, press and hold the
DUAL WATCH/SCAN button again. The SCAN and MEM
icons will disappear from the LCD and the radio will return
to Memory mode.
VHF Marine Radio Protocols
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Operating Your Radio VHF Marine Radio Protocols
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Operating Your Radio
23
Nothing Comes Close to a Cobra
®
22
English
Memory Location Scan
FLOATING MARINE HH150
ESC SETUP
PWR
MEM
H-M-L
ENTER
CHANNEL
SC/DW
16+
VOL
VOL
+
SUBMERSIBLE
MEM/ESC Button
FLOATING MARINE HH150
ESC SETUP
PWR
MEM
H-M-L
ENTER
CHANNEL
SC/DW
16+
VOL
VOL
+
SUBMERSIBLE
Scan Button
Advanced OperationAdvanced Operation
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Channel Scan Mode
During Channel Scan mode, the radio will rapidly switch
from channel to channel through ALL the channels. Whenever
any activity is detected, the radio will stop the scan for 10
seconds to allow you to listen briefly on that channel. The
radio will then continue to scan unless you switch out of the
Channel Scan mode.
To Enter Channel Scan:
1. From Marine Standby mode, press and hold the
DUAL WATCH/SCAN button. The radio will immediately
begin to scan the entire channel map selected in
the active channel map. The SCAN icon will show
on the LCD.
2. A signal on any channel will stop the scan for
10 seconds to allow you to listen to the traffic
on that location.
3. Press the Channel Up or Channel Down button
to resume scanning the Channel Scan channels
or to change the scan direction.
4. To EXIT Channel Scan mode, press and hold the
DUAL WATCH/SCAN button again. The SCAN icon
will disappear from the LCD and the radio will
return to Marine Standby mode.
FLOATING MARINE HH150
ESC SETUP
PWR
MEM
H-M-L
ENTER
CHANNEL
SC/DW
16+
VOL
VOL
+
SUBMERSIBLE
SCAN Button
SCAN Icon
Scanning
FLOATING MARINE HH150
ESC SETUP
PWR
MEM
H-M-L
ENTER
CHANNEL
SC/DW
16+
VOL
VOL
+
SUBMERSIBLE
Channel Up/Down Buttons
VHF Marine Radio Protocols
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
24
English
Maintenance and
Troubleshooting
Operating Your Radio VHF Marine Radio Protocols
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
VHF Marine Radio Protocols
No display on LCD when
radio is turned On
Batteries are exhausted
Batteries not installed
properly
Recharge or
replace batteries
Remove batteries and
reinstall according to
polarity markings
NiMH batteries run
down quickly
Batteries are at the
end of their life
Replace with new batteries
Will transmit at .5 or 1
Watt, but not at 3 Watts
Batteries are low
Selected channel is limited
to one (1) watt
Recharge or
replace batteries
Switch to
another channel
Will not transmit Selected channel is limited
to receive only
Switch to
another channel
No sound from speaker Volume level is too low Re-adjust volume
No response to
button press
Button lock is On Press Backlight/
Key Lock button
No answer to calls Out of range of
other station
Signal is blocked
by terrain
Switch to three watts or
move closer
Move until you have a “line-
of-sight” to the other station
Problem Possible Cause(s) Solution(s)
Maintenance
•
Very little maintenance is required to keep your CobraMarine VHF radio
in good operating condition:
n
Keep the radio clean by wiping with a soft cloth and mild detergent. Do not use
solvents or harsh or abrasive cleaners, which could damage the case or scratch
the LCD screen.
n
If the radio is exposed to salt water, wipe with a soft, moist cloth at least once a day to
prevent buildup of salt deposits, which could interfere with button operation.
n
If the radio will be stored for a long period, such as over the winter,
remove the batteries from the battery tray and store them in a separate
package. This is especially important if you are using alkaline batteries.
Troubleshooting
•
25
Nothing Comes Close to a Cobra
®
VHF Marine Radio
Procedures
VHF Marine Radio Procedures
•
Maintain Your Watch
Whenever your boat is underway, the radio must be turned On and be tuned to
Channel 16 except when being used for messages.
Power
Try 0.5 watts first, if the station being called is within a few miles. If there is no
answer, switch to 1 watt and call again. You have the ability to go up to 3 watts of
output power to increase your calling distance. Remember, the lower wattage outputs
will conserve your battery and minimize interference to other users.
Calling Coast Stations
Call a coast station on its assigned channel. You may use Channel 16 when you
do not know the assigned channel.
Calling Other Vessels
Call other vessels on Channel 16 or on Channel 9. (Channel 9 is preferred for
recreational vessel use.) You may also call on ship-to-ship channels when you know
that the vessel is listening on a ship-to-ship channel.
Initial Calling on Channel 16 or 9
The use of Channel 16 is permitted for making initial contact (hailing) another vessel.
The limits on calling must be followed. Be reminded, Channel 16’s most important
function is for Emergency Messages. If for some reason, Channel 16 is congested, the
use of Channel 9, especially in U.S. waters, may be used as the initial contact (hailing)
channel for non-emergency communication.
Limits on Calling
You must not call the same station for more than 30 seconds at a time. If you do not
get a reply, wait at least two minutes before calling again. After three calling periods,
wait at least 15 minutes before calling again.
Change Channels
After contacting another station on a calling channel, change immediately to a channel
which is available for the type of message you want to send.
Station Identification
Identify, in English, your station by your CE call sign (if available), vessel name and the
state registration number, at both the beginning and at the end of the message.
Prohibited Communications
You MUST NOT transmit:
n
False distress or emergency messages.
n
Messages containing obscene, indecent or profane language.
n
General calls, signals or messages (messages not addressed to a particular station)
on Channel 16, except in an emergency or if you are testing your radio.
n
When you are on land.
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
VHF Marine Radio Protocols
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
VHF Marine Radio Protocols
27
Nothing Comes Close to a Cobra
®
Voice Calling &
Radiotelephone Calls
n
If the other party does not respond, wait two minutes and repeat. You are
permitted to attempt contact three times, two minutes apart. If you still have not
made contact, wait 15 minutes before trying again.
n
After communications are completed, each vessel must sign off with its call sign
or vessel name and the word “out” and return to Channel 16.
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
NOTE
For best sound quality at the station you are calling, hold the microphone on the
front of the radio at least 2 in. (51 mm) from your mouth and slightly off to one
side. Speak in a normal tone of voice.
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
NOTE
“Over and Out”
The most commonly misused procedure words are “over and out” within the
same transmission. “Over” means you expect a reply. “Out” means you are
finished and do not expect a reply.
For Example
26
English
Voice Calling
Voice Calling
•
You are required to listen to Channel 16 while standing by. Channel 16 is the distress
and safety channel used for establishing initial contact with another station and for
emergency communication. The Coast Guard also monitors Channel 16 for safety
purposes for everyone on the water.
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
NOTE
Channel 9 may be used by recreational vessels for general-purpose calling.
This frequency should be used whenever possible to help relieve congestion
on Channel 16. The Coast Guard generally does not make urgent marine
information broadcasts or weather warnings on Channel 9. Boaters are still asked
to “keep watch” on Channel 16 whenever the radio is turned on and
not in use with another station.
To call another vessel or shore station (e.g, lock or bridge tender):
n
Make sure the radio is On.
n
Make sure you are in standby listening mode on Channel 16. Make sure Channel
16 is not in use.
n
When the channel is open (quiet), press the Talk button and call a vessel. Hold
the radio or microphone several inches from your face and speak clearly and
distinctly in a normal voice tone. Say “name or station being called,” “THIS IS
[your vessel name or call sign].”
n
Once contact is made, you must leave Channel 16 and go to another working
channel. See channel listing in the appendix.
The vessel Corsair is calling the vessel Vagabond:
Corsair: “Vagabond, this is Corsair. Over.”
Vagabond: “Please switch and answer on Channel 68 (or any proper working channel).
Over.”
Corsair: “Switching to Channel 68. Over.”
Radiotelephone Calls
•
Boaters may make and receive radiotelephone calls to and from any number on
the telephone network by using the services of public coast stations. For a fee,
calls can be made between your radio and telephones on land, sea and in the air.
See the appendix for the public correspondence (marine operator) channels.
If you plan to use these services, consider registering with the operator of the
public coast station that you plan to work through. These services can provide
you with detailed information and procedures to follow.
NOTICE
You may disclose privileged information during a radiotelephone call.
Keep in mind that your transmission is NOT private, as it is on a regular
telephone. Both sides of the conversation are being broadcast and can be
heard by anyone who has a radio and tunes to the channel you are using.
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Marine Emergency Signals
The three spoken international emergency signals are:
The distress signal MAYDAY is used to indicate that a station is threatened by grave
and imminent danger and requests immediate assistance.
The urgency signal PAN PAN is used when the safety of the vessel or person is in
jeopardy. (This signal is properly pronounced pahn pahn.)
The safety signal SECURITE is used for messages about the safety of navigation or
important weather warnings. (This signal is properly pronounced see-cure-ee-tay.)
When using an international emergency signal, the appropriate signal is to be spoken
three times prior to the message.
MAYDAY
PAN PAN
SECURITE
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
VHF Marine Radio Protocols
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
VHF Marine Radio Protocols
29
Nothing Comes Close to a Cobra
®
28
English
Emergency Messages and
Distress Procedure
Emergency Messages and
Distress Procedure
Emergency Messages and Distress Procedure
•
The ability to summon assistance in an emergency is the primary reason to have a VHF
marine radio. The marine environment can be unforgiving, and what may initially be a
minor problem can rapidly develop into a situation beyond your control.
The Coast Guard monitors Channel 16, responds to all distress calls, and coordinates
all search and rescue efforts. Depending on the availability of other capable vessels or
commercial assistance operators in your vicinity, Coast Guard or Coast Guard Auxiliary
craft may be dispatched.
In any event, communicate with the Coast Guard as soon as you experience difficulties
and before your situation becomes an emergency. Use the emergency message
procedures only after your situation has become grave or you are faced with a sudden
danger threatening life or property and requiring immediate help. Use Channel 16 to
communicate your emergency message. Make sure you transmit on high power.
If you are merely out of gas, do not send an emergency message. Drop your anchor
and call a friend or marina to bring the fuel you need or to give you a tow.
If You Hear a Distress Call
You must give any message beginning with one of these signals priority over any
other messages. ALL stations MUST remain silent on Channel 16 for the duration of
the emergency unless the message relates directly to the emergency.
If you hear a distress message from a vessel, stand by your radio. If it is not
answered, YOU should answer. If the distressed vessel is not nearby, wait a short
time for others who may be closer to acknowledge. Even if you cannot render direct
assistance, you may be in a position to relay the message.
Marine Distress Procedure
Speak slowly — clearly — calmly.
1. Make sure your radio is On.
2. Select Channel 16.
3. Press Talk button and say:
“MAYDAY — MAYDAY — MAYDAY.”
(Or “PAN PAN— PAN PAN— PAN PAN,”
or “SECURITE — SECURITE — SECURITE.”)
4. Say:
“THIS IS [your vessel name or call sign],” repeated three (3) times.
5. Say:
“MAYDAY (or “PAN PAN” or “SECURITE”)
[your vessel name or call sign].
6. Tell where you are:
(what navigational aids or landmarks are nearby).
7. State the nature of your distress.
8. State the kind of assistance needed.
9. Give number of persons aboard and conditions of any injured.
10. Estimate present seaworthiness of your vessel.
11. Briefly describe your vessel (length, type, color, hull).
12. Say:
“I WILL BE LISTENING ON CHANNEL 16.”
13. End message by saying:
“THIS IS [your vessel name or call sign]. OVER.”
14. Release Talk button and listen. Someone should answer.
If not, repeat the call, beginning at step 3 above.
Keep the radio nearby. Even after your message has been received, the Coast Guard can
find you more quickly if you can transmit a signal for a rescue boat to hone in on.
Specifications
For Example
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
VHF Marine Radio Protocols
31
Nothing Comes Close to a Cobra
®
30
English
Emergency Messages
and Distress Procedure
“Mayday — Mayday — Mayday”
“This is Corsair — Corsair — Corsair” [or “IL 1234 AB,” repeated three (3) times]
“Mayday Corsair (or IL 1234 AB)”
“Navy Pier bears 220 degrees magnetic — distance 5 miles”
“Struck submerged object and flooding — need pump and tow”
“Four (4) adults, three (3) children aboard — no one injured”
“Estimate we will remain afloat one-half hour”
“Corsair (or IL 1234 AB) is 26 ft sloop with blue hull and tan deck house”
“I will be listening on Channel 16”
“This is Corsair (or IL 1234 AB)”
“Over”
It is a good idea to write out a script of the message form and post it where you
and others on your vessel can see it when an emergency message needs to be sent.
Specifications
Specifications (Typical)
•
General
Number of Channels All International, Canadian and U.S.
Channels
Channel Spacing 25 kHz
Modulation 5 kHz Max.
Input Voltage 6.0 VDC
Battery Life: NiMH: 9.4 hours @ 3 watts
20 hours @ 0.5 watts
5% TX, 5% RX, 90% Standby 12 hours @ 1 watt
Alkaline: 26 hours @ 3 watts
33 hours @ 1 watt
Current Drain:
Standby 45 mA
Receive (Rx) 140 mA
Transmit (Tx) 1.1 A @ High Power, 450 mA @ Low Power
Temperature Range -20˚C to 50˚C
Radio Dimensions 4.5” H x 2.7” W x 1.5” D
(114 mm x 69 mm x 38 mm) not including
antenna
Radio Weight 0 lbs., 8 oz. (247g.)
Receiver
Frequency Range 156.050 to 163.275 MHz
Receiver Type Double Conversion Super-Heterodyne
Sensitivity:
12 dB Sinad 0.25 uV
Adjacent Channel Selectivity 70 dB
Intermodulation and Rejection 70 dB
Spurious and Image Rejection 70 dB
AF Output 250 mW @ 8 Ohms
Transmitter
Frequency Range (Tx): 156.025 to 157.425 MHz
RF Output Power .5, 1 or 3 watts
Spurious Emissions -60 dB @ High Power, -55 dB @ Low
Power
Microphone Type Condenser
Frequency Stability +/-10 ppm
FM Hum and Noise 40 dB
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Apéndice
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Appendix
33
Nothing Comes Close to a Cobra
®
/Nada se compara a Cobra
®
32
English/Español
Asignación de canales de VHF
para radiocomunicación marítima
VHF Marine
Channel Assignments
Asignación de canales de VHF para radiocomunicación marítima
•
Se han establecido tres conjuntos de canales de VHF para uso marítimo internacionalmente,
Canadá y los EE. UU. La mayoría de los canales coinciden en los tres mapas, pero sin duda
existen diferencias (consulte las tablas en las páginas siguientes). El radio incorpora los tres
mapas y funcionará correctamente en cualquiera de las tres áreas. Cuando se envíe desde
la fábrica, su radio se configurará en el Mapa de canal internacional. (Consulte la página 15
para obtener instrucciones sobre cómo cambiar el mapa de canales).
A continuación presentamos en forma resumida las asignaciones de canales del
Mapa de canales para EE.UU.
Auxilio, seguridad y llamadas
Canal 16
Para ser oídos por otra estación (llamadas) o en casos de emergencia (auxilio y seguridad).
Llamadas
Canal 9
Llamadas de carácter general (excepto casos de emergencia) para embarcaciones no comerciales.
Se le pide encarecidamente a la tripulación de las embarcaciones recreativas usar este canal
para reducir la congestión del canal 16.
Seguridad entre embarcaciones
Canal 6
Para mensajes de seguridad entre embarcaciones y para mensajes de búsqueda y rescate
enviados a barcos y aviones de la guardia costera.
Enlace con la guardia costera
Para hablar con las guardias costeras estadounidenses y canadienses (excepto casos de
emergencia) tras haber establecido contacto por el canal 16.
No comerciales
Canales activos para pequeñas embarcaciones. Los mensajes deberán estar relacionados con
necesidades de las embarcaciones, como por ejemplo, informes de pesca, atraques y agrupamientos.
Use el canal 72 solamente para mensajes entre embarcaciones.
Comerciales
Canales activos para embarcaciones activas solamente. Los mensajes deberán estar
relacionados con la actividad comercial o las necesidades de la embarcación. Use los
canales 8, 67, 72 y 88A solamente para mensajes entre embarcaciones.
Asignaciones de canales (Español)
VHF Marine Channel Assignments
•
Three sets of VHF channels have been established for marine use in the U.S.A.,
Canada and the rest of the world (International). Most of the channels are the same
for all three maps, but there are definite differences (see table on the following
pages). Your radio has all three maps built into it and will operate correctly in
whichever area you choose. When shipped from the factory, your radio will be set to
the International Channel Map. (See page 15 for instructions on how to change the
Channel Map.)
The following is a brief outline of the channel assignments in the U.S.A. Channel Map.
Distress, Safety, and Calling
Channel 16
Getting the attention of another station (calling) or in emergencies (distress and safety).
Calling
Channel 9
General-purpose (non-emergency) calling by non-commercial vessels. Recreational boaters are
urged to use this channel to reduce congestion on Channel 16
Intership Safety
Channel 6
Ship-to-ship safety messages and for search and rescue messages to Coast Guard ships
and aircraft.
Coast Guard Liaison
Channel 22A
To talk to the Coast Guard, Canadian Coast Guard (non-emergency) after making contact on
Channel 16.
Non-Commercial
Channels 67*, 68*, 69, 71, 72, 78A, 79A*, 80A*
Working channels for small vessels. Messages must be about needs of the vessel, such as
fishing reports, berthing and rendezvous. Use Channel 72 only for ship-to-ship messages.
Commercial
Channels 1A, 7A, 8, 9, 10, 11, 18A, 19A, 63A, 67, 72, 79A, 80A, 88A*
Working channels for working ships only. Messages must be about business or needs
of the ship. Use Channels 8, 67, 72 and 88A only for ship-to-ship messages.
Channel Assignments (English)
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Apéndice
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Appendix
Asignación de canales de VHF
para radiocomunicación marítima
VHF Marine
Channel Assignments
35
34
Nothing Comes Close to a Cobra
®
/Nada se compara a Cobra
®
English/Español
Sea Tow ARC (Automated Radio Check)
Channels 24, 25, 26, 27, 28
Tune your radio to the proper channel for your community. Conduct a radio check as you normally would.
Upon releasing the mic, the system will replay your transmission, letting you hear how you sound.
Public Correspondence (Marine Operator)
Channels 84, 85, 86, 87, 87A, 88*
For calls to marine operators at public coast stations. You can make and receive telephone calls
through these stations.
Port Operations
Channels 1A*, 5A*, 12*, 14*, 20A, 63A*, 65A, 66A, 73, 74, 75, 76, 77*
Used for directing the movement of ships in or near ports, locks or waterways. Messages
must be about operational handling, movement and safety of ships.
Navigational
Channels 13, 67
Channels are available to all vessels. Messages must be about navigation, including passing
or meeting other vessels. These are also the main working channels for most locks and drawbridges.
You must keep your messages short and power output at no more than 1 watt.
Maritime Control
Channel 17
For talking to vessels and coast stations operated by state or local governments. Messages must be
about regulation and control, boating activities, or assistance.
Digital Selective Calling
Channel 70
This channel is set aside for distress, safety and general calling using only digital selective calling
techniques. Voice communication is prohibited; your radio cannot transmit voice messages on this channel.
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
NOTE
* These channels are restricted to the listed uses in certain parts of the country
or for certain types of users only. Consult FCC, CE rules or a knowledgeable radio
operator before using them.
Remolque Marino CAR (Chequeo Automatizado de la Radio)
Canales 24, 25, 26, 27, 28
Sintonice su radio en el canal apropiado para su comunidad. Realice un chequeo de la radio como lo
hace normalmente. Al soltar el micrófono, el sistema repetirá su transmisión, dejá oír como suena.
Correspondencia pública (operador marítimo)
Canales 84, 85, 86, 87, 87A, 88*
Para llamadas a operadores marítimos en estaciones costeras públicas. Usted puede realizar y
recibir llamadas telefónicas a través de estas estaciones.
Operaciones portuarias
Canales 1A*, 5A*, 12*, 14*, 20A, 63A*, 65A, 66A, 73, 74, 75, 76, 77*
Usados para dirigir el movimiento de las embarcaciones dentro de áreas portuarias, esclusas o
canales. Los mensajes deberán estar relacionados con maniobras operacionales, movimientos
y seguridad de las embarcaciones.
Navegación
Canales 13, 67
Estos canales están disponibles para todas las embarcaciones. Los mensajes deberán
estar relacionados con la navegación, incluidas las maniobras para pasar o alcanzar otras
embarcaciones. Éstos también son los principales canales activos para la mayoría de las esclusas
y puentes levadizos. Usted deberá transmitir mensajes cortos y mantener la potencia de salida en
un vatio como máximo.
Control marítimo
Canal 17
Para comunicarse con embarcaciones y estaciones costeras operadas por entidades
gubernamentales locales o estatales. Los mensajes deberán estar relacionados con regulación y
control, asistencia o actividades de navegación.
Llamadas selectivas digitales
Canal 70
Este canal está reservado para solicitudes de auxilio, seguridad y llamadas de carácter general
que usen solamente técnicas de llamadas selectivas digitales. Las comunicaciones verbales están
prohibidas; el radio no puede transmitir mensajes de voz por este canal.
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
NOTA
* El uso de estos canales está dedicado a las aplicaciones que aparecen en la lista, en
ciertas partes del país o para ciertos tipos de usuario solamente. Consulte las normas de la
FCC, CE o una radio con conocimientos operador antes de usarlos.
Channel Assignments (English) Asignaciones de canales (Español)
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29

Cobra MR HH150 FLT Manuale del proprietario

Cobra
Marca
Cobra
Modello
MR HH150 FLT
Categoria
Radio a due vie
Tipo
Manuale del proprietario
Scarica PDF
rapporto

in altre lingue

Documenti correlati

Altri documenti