Electrolux EWC1050 Manuale utente

Marca: Electrolux

Modello: EWC1050

Categoria: Lavatrici

Tipo: Manuale utente

EWC 1050

................................................ .............................................

EN WASHING MACHINE USER MANUAL 2

IT LAVABIANCHERIA ISTRUZIONI PER L’USO 23

Electrolux. Thinking of you.

Share more of our thinking at www.electrolux.com

CONTENTS

Safety information 2

Safety instructions 3

Product description 4

Control panel 6

Before first use 8

Daily use 8

Helpful hints and tips 11

Washing programmes 12

Care and cleaning 14

What to do if… 15

Technical data 17

Consumption values 18

Installation 18

Environment concerns 22

Subject to change without notice.

SAFETY INFORMATION

Before the installation and use of the appliance, carefully read

the supplied instructions. The manufacturer is not responsible

if an incorrect installation and use causes injuries and dam-

ages. Always keep the instructions with the appliance for fu-

ture reference.

CHILDREN AND VULNERABLE PEOPLE SAFETY

Warning! Risk of suffocation, injury or permanent disability.

• Do not let persons, children included, with reduced physical

sensory, reduced mental functions or lack of experience and

knowledge use the appliance. They must have supervision

or instruction for the operation of the appliance by a person

who is responsible for their safety.

• Do not let children play with the appliance.

• Keep all packaging away from children.

• Keep all detergents away from children.

• Keep children and pets away from the appliance door when

it is open.

• If the appliance has a child safety device, we recommend

you activate it.

GENERAL SAFETY

• Before maintenance, deactivate the appliance and discon-

nect the mains plug from the mains socket.

• Do not change the specification of this appliance.

2 electrolux

• Obey the maximum load volume of 3 kg (refer to the “Pro-

gramme chart” chapter).

• If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualified persons

in order to avoid a hazard.

• The operating water pressure (minimum and maximum)

must be between 0,5 bar (0,05 MPa) and 8 bar (0,8 MPa)

• The ventilation openings in the base (if applicable) must not

be obstructed by a carpet.

• The appliance is to be connected to the water mains using

the new supplied hose-sets. Old hose sets must not be

reused.

SAFETY INSTRUCTIONS

INSTALLATION

• Remove all the packaging and the transit

bolts.

• Keep the transit bolts. When you move

the appliance again you must block the

drum.

• Do not install or use a damaged appli-

ance.

•Do not install or use the appliance where

the temperature is less than 0 °C or

where it is exposed to the weather.

• Obey the installation instruction supplied

with the appliance.

• Make sure that the floor where you install

the appliance is flat, stable, heat resistant

and clean.

• Do not install the appliance where the ap-

pliance door can not be fully opened.

• Always be careful when you move the

appliance because it is heavy. Always

wear safety gloves.

• Make sure that there is air circulation be-

tween the appliance and the floor.

• Adjust the feet to have the necessary

space between the appliance and the

carpet.

Electrical connection

Warning! Risk of fire and electrical

shock.

• The appliance must be earthed.

• Make sure that the electrical information

on the rating plate agrees with the power

supply. If not, contact an electrician.

• Always use a correctly installed shock-

proof socket.

• Do not use multi-plug adapters and ex-

tension cables.

• Make sure not to cause damage to the

mains plug and to the mains cable. Con-

tact the Service or an electrician to

change a damaged mains cable.

• Connect the mains plug to the mains

socket only at the end of the installation.

Make sure that there is access to the

mains plug after the installation.

• Do not pull the mains cable to disconnect

the appliance. Always pull the mains

plug.

• Do not touch the mains cable or the

mains plug with wet hands.

• This appliance complies with the E.E.C.

Directives.

Water connection

• Make sure not to cause damage to the

water hoses.

• The appliance is to be connected to the

water mains using the new supplied

hose-sets. Old hose sets must not be

reused.

electrolux 3

• Before you connect the appliance to new

pipes or pipes not used for a long time,

let the water flow until it is clean.

• The first time you use the appliance,

make sure that there is no leakage.

USE

Warning! Risk of injury, electrical

shock, fire, burns or damage to the

appliance.

• Use this appliance in a household envi-

ronment.

• Obey the safety instructions on the deter-

gent packaging.

• Do not put flammable products or items

that are wet with flammable products in,

near or on the appliance.

• Do not touch the glass of the door while

a programme operates. The glass can be

hot.

• Make sure that you remove all metal ob-

jects from the laundry.

• Do not put a container to collect possible

water leakage under the appliance. Con-

tact the Service to ensure which acces-

sories can be used.

CARE AND CLEANING

Warning! Risk of injury or damage to

the appliance.

• Do not use water spray and steam to

clean the appliance.

• Clean the appliance with a moist soft

cloth. Only use neutral detergents. Do

not use abrasive products, abrasive

cleaning pads, solvents or metal objects.

DISPOSAL

Warning! Risk of injury or suffocation.

• Disconnect the appliance from the mains

supply.

• Cut off the mains cable and discard it.

• Remove the door catch to prevent chil-

dren and pets to get closed in the appli-

ance.

PRODUCT DESCRIPTION

Your new appliance meets all modern requirements for effective treatment of laundry

with low water, energy and detergent consumption. Its new washing system allows

total use of detergent and reduces water consumption so saving energy.

4 electrolux

MACHINE FRONT

1 2

Detergent dispenser drawer

Control panel

Door opening handle

Adjustable feet (front)

electrolux 5

MACHINE REAR

Transit locking devices

Drain hose

Electrical lead

Inlet hose

DETERGENT DISPENSER DRAWER

Compartment for powder or liquid de-

tergent used for main wash. If using liquid

detergent pour it just before starting the

programme.

Compartment for liquid additives (fabric

softener, starch).

Any fabric softener or starching additives

must be poured into the compartment be-

fore starting the wash programme.

Prewash detergent is to be added

straight into the drum.

CONTROL PANEL

Henceforth, the programme selector dial, the spin selector dial, programme pro-

gress lights and different buttons will be indicated in all the book with the relevant

numbers given below.

6 electrolux

Tür

Porte

Ende

Fin

Wasch en

Schleudern

Essorage

Handwäsche

Lavage à la main

Koch-/Buntwäsche

Blanc/Couleurs

Aus

Arrêt

Schleudern/Essorage

Pumpen

Vidange

Spülen

Rinçage

Feinwäsche / Délicats

Wolle

Laine

Wolle Kalt

Laine Froid

Mini

800

1000

400

600

Lavage

Start

Pause

Zeit-

vorwahl

Marche

Pause

Extra

Spülen

Rinçage

Plus

Vor-

wäsche

Extra Court

Court

Pré-

lavage

Départ

Diéré

Kurz

Pegeleicht

Synthétique

Extra Kurz

1 2 3 4 5 6 8 97

Detergent drawer

QUICK/EXTRA QUICK button

(Court/Kurz-Extra Court/Extra

Kurz)

PREWASH button (Prélavage/Vor-

wäsche)

EXTRA RINSE button (Rinçage

Plus/Extra Spülen)

START/PAUSE button (Marche/

Pause - Start/Pause)

DELAY START button (Départ Dif-

féré - Zeitvorwahl)

Programme progress lights

SPIN reduction selector

Programme selector dial

DETERGENT DRAWER

Detergent drawer has 2 separate compart-

ments for detergent and fabric conditioner.

Prewash detergent is to be added

straight into the drum.

SUPER QUICK

Very short programme for lightly soiled

laundry, except for wool. The washing time

will be reduced approx. 30 minutes for cot-

ton and by 20 minutes for synthetic. The

machine will perform 1 rinse less.

QUICK

By selecting this option the washing time

will be reduced approx. 10 minutes. This

option is recommended for lightly soiled

white-/coloured and synthetic laundry.

PREWASH

By selecting this option the machine per-

forms a prewash cycle before the main

wash phase. The washing time will be pro-

longed. This option is recommended for

heavily soiled laundry.

EXTRA RINSE

This appliance is designed for saving ener-

gy. If it necessary to rinse the laundry using

an extra quantity of water (super rinse), se-

lect this option. Some additional rinses will

be performed. This option is recommended

for people who are allergic to detergents,

and in areas where the water is very soft.

START PAUSE

This button allows you to start or to inter-

rupt the selected programme.

DELAY START

By selecting this option it is possible to de-

lay the starting of the washing programme

by eight, four or two hours. The selected

delay is indicated by the illumination of the

corresponding light.

PROGRAMME PROGRESS LIGHTS

When choosing delay start, the light rele-

vant to the selected delay lights up. After

the appliance has started, the remaining

time is shown by the corresponding indica-

tor light.

The light Waschen/Lavage illuminates

when the machine is performing the wash-

ing phase. If the prewash option was chos-

en, the light will be on during the prewash

phase too.

The light Ende/Fin illuminates at the end of

the washing cycle.

The light Tür/Porte indicates if the door

can be opened:

• The light is lit: the door cannot be

opened.

electrolux 7

• The light is out: the door can be opened.

• The light is flashing: the door can soon

be opened.

SPIN REDUCTION DIAL

By turning the spin speed selector you can

change the spin speed of the selected pro-

gramme or to select «Rinse hold» or «No

spin»option.

PROGRAMME SELECTOR DIAL

It allows you to switch the appliance on/off

and/or to select a programme.

BEFORE FIRST USE

Warning!

Ensure that the electrical and water con-

nections comply with the installation in-

structions.

Important! Remove any material from the

drum.

Important! We recommend you to run a

wash programme without any load, to clear

any residues which may have been left by

the manufacturing process. Pour approx.

100 ml of detergent straight into the drum

and run a cotton cycle at 60°C. When the

programme is finished the machine will be

ready to use.

DAILY USE

Load the laundry

Open the door by carefully pulling the door

handle outwards. Place the laundry in the

drum, one item at a time, shaking them out

as much as possible. Close the door.

Make sure that no laundry stays between

the seal and the door. There is a risk of wa-

ter leakage or damage to the laundry.

MEASURE OUT THE DETERGENT AND

THE FABRIC SOFTENER

Pull out the dispenser drawer until it stops.

Measure out the amount of detergent re-

quired, pour it into the larger compartment

on the left

If required, pour fabric softener into the

smaller compartment marked

(the

amount used must not exceed the «MAX»

mark in the drawer). Close the drawer gen-

tly.

8 electrolux

SELECT THE REQUIRED PROGRAMME

BY MEANS OF THE PROGRAMME

SELECTOR DIAL (9)

Turn the programme selector dial to the re-

quired programme. The selector can be

turned either clockwise or anticlockwise.

The green light of button 6 starts to flash

On programme progress display the pilot

lights corresponding to all phases compos-

ing the selected programme are lit.

On position "Aus/Arrêt" the programme is

reset and the machine is switched OFF.

At the end of the programme the selec-

tor dial must be turned to position

"Aus/Arrêt" to switch the machine off.

Important! If you turn the programme

selector dial to another programme when

the machine is working, the lights in the

programme progress display will start to

flash to indicate a wrong selection. The

machine will not perform the new selected

programme.

SELECT THE SPIN SPEED, RINSE

HOLD OR NO SPIN OPTION (8)

Select the spin speed, Rinse Hold option or

No Spin option by turning the spin speed

selector.

• The position 1000 is equivalent to 900

rpm for the synthetic and wool/handwash

programmes and 700 rpm for the deli-

cate wash and mini programme.

Rinse hold

By selecting this option the water of the last

rinse is not emptied out to prevent the fab-

rics from creasing. When the programme

has finished, the lights "End" and "Door"

are lit to indicate that the water must be

emptied out (See: " At the end of the pro-

gramme").

No spin

By selecting this option all the spinning

phases are excluded. To be used for ex-

tremely delicate material. The machine will

add some additional rinses to the cotton

and synthetic programmes.

For the maximum spin speed allowed by

each programme, refer to the chapter

Washing programmes.

SELECT THE DESIRED OPTION BY

MEANS OF BUTTONS 2, 3 AND 4

Depending on the programme, different

functions can be combined. These must be

selected after choosing the desired pro-

gramme and before pressing the button

Start Pause.The relevant light will illumi-

nate.

Start

Pause

Zeit-

vorwahl

Marche

Pause

Extra

Spülen

Rinçage

Plus

Vor-

wäsche

Extra Court

Court

Pré-

lavage

Départ

Diéré

Kurz

Extra Kurz

If an incorrect option is selected, the corre-

sponding indicator lamp flashes for about 2

seconds. For the compatibility of the op-

tions with the washing programmes, refer

to the chapter «Washing programmes».

SELECT THE DELAY START BY

PRESSING BUTTON 6

Before you start the programme, if you wish

to delay the start, press the button 6 re-

peatedly, to select the desired delay. The

corresponding pilot light will light up.

Tür

Porte

Ende

Fin

Waschen

Lavage

Zeit-

vorwahl

Départ

Diéré

electrolux 9

You must select this option after you have

set the programme and before you press

button Start Pause.

You can cancel or modify the delay time at

any moment, before you press button Start

Pause.

Cancelling the delayed start after having

pressed button Start Pause :

1. Set the washing machine to PAUSE by

pressing button Start Pause.

2. Press the button 6 repeatedly until the

light relevant to the selected delay goes

off.

3. Press button Start Pause again to

start the programme.

Important! The selected delay can be

changed only after selecting the washing

programme again.

The door will be locked throughout the de-

lay time (door locked light lit).

The Delay Start can not be selected with

DRAIN or SPIN programme.

START THE PROGRAMME BY

PRESSING BUTTON 5

To start the selected programme, press this

button; the corresponding pilot light stops

flashing and remains lit.

On programme progress display the pilot

lights "Washing" and "Door" illuminate to in-

dicate that the appliance starts operating

and the door is locked.

ALTERING AN OPTION OR A RUNNING

PROGRAMME

It is possible to change any option before

the programme carries it out.

Before you make any change, you must

pause the washing machine by pressing the

button Start/Pause.

The programme can be changed as long as

the button Start/Pause has not been

pressed. Changing a running programme is

possible only by resetting it. Turn the pro-

gramme selector dial to "Aus/Arrêt" and

then to the new programme position. Start

the new programme by pressing the button

Start/Pause again.

INTERRUPTING A PROGRAMME

Press the button Start\Pause to interrupt a

programme which is running, the corre-

sponding light starts to flash. Press the but-

ton again to restart the programme.

CANCELLING A PROGRAMME

Turn the selector dial to "Aus/Arrêt" posi-

tion to cancel a programme which is run-

ning. Now you can select a new pro-

gramme.

OPENING THE DOOR AFTER THE

PROGRAMME HAS STARTED

First set the machine to pause by pressing

the button Start\Pause.

After some minutes, the door can be

opened, when the following conditions are

observed:

• The water temperature is below 55°C.

• The water level is below the bottom edge

of the door.

• The machine doesn’t spin.

If you cannot open the door but it is abso-

lutely necessary to open it you have to

switch the machine off by turning the selec-

tor dial to "Aus/Arrêt". After few minutes

the door can be opened

(Pay attention to the water level and

temperature!).

After this procedure, it will be necessary to

set the programme and the options again

and then press the button Start\Pause.

AT THE END OF THE PROGRAMME

The machine stops automatically.

The pilot light " End" illuminates to indicate

that the programme has finished. The pilot

light "Door" goes out, the door can be

opened and the laundry can be removed.

If at the end of a programme there is water

in the tub (when the Rinse Hold option has

been selected), to empty out the water

follow the following instructions:

• turn the programme selector dial to

"Aus/Arrêt"

• select the «Drain» or «Spin» programme

•press the "Start" button

When the pilot light "Door" goes out, the

door can be opened and the laundry can

be removed.

At the end of the cycle, turn the programme

selector dial to "Aus/Arrêt" to switch the

machine off.

Remove the laundry from the drum and

carefully check that the drum is empty. If

10 electrolux

you do not intend to carry out another

wash, close the water tap.

Leave the door open to prevent the forma-

tion of mildew and unpleasant smells.

HELPFUL HINTS AND TIPS

SORTING OUT THE LAUNDRY

Follow the wash code symbols on each

garment label and the manufacturer’s

washing instructions. Sort the laundry as

follows: whites, coloureds, synthetics, deli-

cates, woollens.

TEMPERATURES

95° or 90°

for normally soiled white cot-

tons and linen (e.g. tea cloths,

towels, tablecloths, sheets...)

60°/50°

for normally soiled, colour fast

garments (e.g. shirts, night

dresses, pyjamas....) in linen,

cotton or synthetic fibres and

for lightly soiled white cotton

(e.g. underwear)

40°-30°-

Cold

for delicate items (e.g. net cur-

tains), mixed laundry including

synthetic fibres and woollens

bearing the label «pure new

wool, machine washable, non-

shrink»

BEFORE LOADING THE LAUNDRY

Never wash whites and coloureds together.

Whites may lose their «whiteness» in the

wash.

New coloured items may run in the first

wash; they should therefore be washed

separately the first time.

Make sure that no metal objects are

left in the laundry (e.g. hair clips, safety

pins, pins).

Button up pillowcases, close zip fasteners,

hooks and poppers. Tie any belts or long

tapes.

Remove persistent stains before washing.

Rub particularly soiled areas with a special

detergent or detergent paste.

Treat curtains with special care. Remove

hooks or tie them up in a bag or net.

LAUNDRY WEIGHTS

The following weights are indicative:

bathrobe 1200 g

The following weights are indicative:

quilt cover 700 g

man’s work shirt 600 g

sheet, man’s pyjamas 500 g

tablecloth 250 g

pillow case, towelling towel,

night dress, man’s shirt

200 g

tea cloth, ladies’ briefs, nap-

kin, blouse, men’s under-

pants

100 g

DETERGENTS AND ADDITIVES

Good washing results also depend on the

choice of detergent and use of the correct

quantities to avoid waste and protect the

environment.

Although biodegradable, detergents contain

substances which, in large quantities, can

upset the delicate balance of nature.

The choice of detergent will depend on the

type of fabric (delicates, woollens, cottons,

etc.), the colour, washing temperature and

degree of soiling.

All commonly available washing machine

detergents may be used in this appliance:

• powder detergents for all types of fabric

• powder detergents for delicate fabrics

(60°C max) and woollens

• liquid detergents, preferably for low tem-

perature wash programmes (60°C max)

for all types of fabric, or special for wool-

lens only.

The detergent and any additives must be

placed in the appropriate compartments of

the dispenser drawer before starting the

wash programme.

Prewash detergent is to be added

straight into the drum

If using liquid detergents, a programme

without prewash must be selected. Pour

the liquid detergent into the detergent com-

partment immediately before you start the

programme.

electrolux 11

Your appliance incorporates a recirculation

system which allows an optimal use of the

concentrated detergent.

Follow the product manufacturer’s recom-

mendations on quantities to use and do

not exceed the «MAX» mark in the de-

tergent dispenser drawer.

DEGREES OF WATER HARDNESS

Water hardness is classified in so-called

“degrees” of hardness. Information on hard-

ness of the water in your area can be ob-

tained from the relevant water supply com-

pany, or from your local authority. If the wa-

ter hardness degree is medium or high we

suggest you to add a water softener follow-

ing always the manufacturer’s instructions.

When the degree of hardness is soft, read-

just the quantity of the detergent.

WASHING PROGRAMMES

Programme/ Tem-

perature

Type of laundry Options

Description of the

programme

COTTON

(KOCH-/BUNTWÄ-

SCHE

BLANC/COULEURS)

90°

White cotton (heavily

and normally soiled

cotton items)

SPIN REDUCTION/

RINSE HOLD/NO

SPIN

SUPER QUICK

QUICK

PREWASH

EXTRA RINSE

DELAY START

Main wash

Rinses

Long spin max. 1000

rpm

Max load 3 kg

Red. load 2 kg

COTTON ECO

(KOCH-/BUNTWÄ-

SCHE ECO

BLANC/COULEURS

ECO)

and

White cotton econo-

(This programme can

be selected for slightly

or normally soiled cot-

ton items. The temper-

ature will decrease and

the washing time will

be extended. This al-

lows to obtain a good

washing efficiency so

saving energy.)

SPIN REDUCTION/

RINSE HOLD/NO

SPIN

PREWASH

EXTRA RINSE

DELAY START

Main wash

Rinses

Long spin max. 1000

rpm

Max load 3 kg

COTTON

(KOCH-/BUNTWÄ-

SCHE

BLANC/COULEURS)

60° - 30°

Coloured cotton

(heavily and normally

soiled cotton items)

SPIN REDUCTION/

RINSE HOLD/NO

SPIN

SUPER QUICK

QUICK

PREWASH

EXTRA RINSE

DELAY START

Main wash

Rinses

Long spin max. 1000

rpm

Max load 3 kg

Red. load 2 kg

SYNTHETIC

(PFLEGELEICHT -

SYNTHÉTIQUE)

40°-30°

Synthetic or mixed

fabrics: underwear,

coloured garments,

non-shrink shirts, blou-

ses.

SPIN REDUCTION/

RINSE HOLD/NO

SPIN

SUPER QUICK

QUICK

PREWASH

EXTRA RINSE

DELAY START

Main wash

Rinses

Short spin max. 800

rpm

Max Load 1,5 kg

12 electrolux

Programme/ Tem-

perature

Type of laundry Options

Description of the

programme

DELICATE

(FEINWÄSCHE - DÉLI-

CATS)

40°

Delicate fabrics:

acrylics, viscose, poly-

ester.

SPIN REDUCTION/

RINSE HOLD/NO

SPIN

SUPER QUICK

PREWASH

EXTRA RINSE

DELAY START

Main wash

Rinses

Short spin max. 600

rpm

Max Load 1,5 kg

HANDWASH

(HANDWÄSCHE -

LAVAGE À LA MAIN)

30°

Special programme for

delicate fabrics with

«hand washing» care

symbol.

SPIN REDUCTION/

RINSE HOLD/NO

SPIN

DELAY START

Main wash

Rinses

Short spin max. 800

rpm

Max Load 1 kg

WOOL

(WOLLE – LAINE)

40°-COLD

Washing programme

for machine washable

wool as well as for

hand washable wool-

lens and delicate fab-

rics.

SPIN REDUCTION/

RINSE HOLD/NO

SPIN

DELAY START

Main wash

Rinses

Short spin max. 800

rpm

Max Load 1 kg

MINI 30

30°

For lightly soiled laun-

dry or for laundry

which needs freshen-

ing up.

SPIN REDUCTION/

RINSE HOLD/NO

SPIN

DELAY START

Main wash

Rinses

Short spin max. 600

rpm

Max Load 1,5 kg

RINSES

(SPÜLEN - RINÇAGE)

With this programme it

is possible to rinse and

spin cotton garments

which have been

washed by hand. The

machine performs 3

rinses, followed by a fi-

nal long spin. The spin

speed can be re-

duced.

SPIN REDUCTION/

RINSE HOLD/NO

SPIN

EXTRA RINSE

DELAY START

Rinses

Spin max. 1000 rpm

Max Load 3 kg

DRAIN

(PUMPEN - VIDANGE)

For emptying out the

water of the last rinse

in programmes with

the Rinse Hold or No

Spin option selected.

Draining of water

Max Load 3 kg

SPIN

(SCHLEUDERN - ES-

SORAGE)

Separate spin for hand

washed garments and

after programmes with

the Rinse Hold option

selected. You can

choose the spin speed

by turning the spin

speed selector to

adapt it to the fabrics

to be spun.

SPIN REDUCTION

Drain and long spin

Max. spin speed 1000

rpm

Max Load 3 kg

OFF

AUS/ARRÊT

For resetting the pro-

gramme or switching

the machine off

1) If you select this option, we recommend that you reduce the maximum load as indicated. (Red. load= reduced

load). Full loading is possible however with somewhat reduced cleaning results.

electrolux 13

2) Standard programmes for the Energy Label consumption values.

According to regulation 1061/2010, these programmes are respectively the «Standard 60 °C cotton programme»

and the «Standard 40 °C cotton programme». They are the most efficient programmes in terms of combined

energy and water consumptions for washing normally soiled cotton laundry.

The water temperature of the washing phase may differ from the temperature declared for the selected pro-

gramme.

CARE AND CLEANING

Important! You must DISCONNECT the

appliance from the electricity supply, before

you can carry out any cleaning or

maintenance work.

DESCALING

The water we use normally contains lime. It

is a good idea to periodically use a water

softening powder in the machine. Do this

separately from any laundry washing, and

according to the softening powder manu-

facturer's instructions. This will help to pre-

vent the formation of lime deposits.

MAINTENANCE WASH

With the use of low temperature washes it

is possible to get a build up of residues in-

side the drum.

We recommend that a maintenance wash

be performed on a regular basis.

To run a maintenance wash:

• The drum should be empty of laundry.

• Select the hottest cotton wash pro-

gramme.

• Use a normal measure of detergent,

must be a powder with biological proper-

ties.

EXTERNAL CLEANING

Clean the exterior cabinet of the appliance

with soap and water only, and then dry

thoroughly.

CLEANING THE DISPENSER DRAWER

The washing powder and additive dispens-

er drawer should be cleaned regularly.

1. If necessary, the whole detergent draw-

er can be taken out of the machine for

cleaning. You need to pull it firmly out-

wards, so that it comes free of retaining

stop.

2. To remove the siphon at the inside

edge of the drawer for cleaning, you

need to press it inwards and pull it up-

wards at the same time. Flush it out un-

der a tap, to remove any traces of ac-

cumulated powder. When you put it

back, press it downwards until you

hear a distinct click.

14 electrolux

CLEANING THE DRAWER RECESS

Having removed the drawer, use a small

brush to clean the recess, ensuring that all

washing powder residue is removed from

the upper and lower part of the recess.

Replace the drawer and run the rinse pro-

gramme without any clothes in the drum.

CLEANING THE WATER INLET FILTER

If your water is very hard or contains traces

of lime deposit, the water inlet filter may be-

come clogged. It is therefore a good idea to

clean it from time to time.

Turn off the water tap. Unscrew the water

inlet hose. Clean the filter using a hard bris-

tle brush. Tighten up the inlet hose.

THE DANGERS OF FREEZING

If the machine is exposed to temperatures

below 0°C, certain precautions should be

taken.

• Turn off the water supply.

• Unscrew the inlet hose from the supply

tap.

• Select a wash programme, start the ma-

chine and let the programme run for a

short time.

• Interrupt the programme by turning the

programme selector to

position.

• Place the end of inlet and drain hoses

down low, into the waste gully (floor

drain) set into the floor. Make sure that

the end of the hose does not go below

the water level in the gully's (drain's) wa-

ter tap.

• Select the programme "Drain" and let it

run until it is finished.

•

Turn the programme selector to

posi-

tion. When you intend to start the ma-

chine up again, make sure that the room

temperature is above 0 °C.

The appliance is only to be used and stored

indoors at normal room temperature. The

manufacturer is not responsible for any

frost damage.

WHAT TO DO IF…

Certain problems are due to lack of simple

maintenance or oversights, which can be

solved easily without calling out an engi-

neer. Before contacting your local Service

Centre, please carry out the checks listed

below.

During machine operation it is possible that

the End pilot light blinks to indicate that the

machine is not working:

• 1 flash: problem with the water supply.

• 2 flashes: problem with the water drain-

ing.

• 4 flashes: door open.

Once the problem has been eliminated,

press the button START to restart the pro-

gramme. If after all checks, the problem

persists, contact your local Service Centre.

electrolux 15

Problem Possible cause/Solution

The machine does not start:

The door has not been closed.

• Close the door firmly.

The plug is not properly inserted in the power socket.

• Insert the plug into the power socket.

There is no power at the socket.

• Please check your domestic electrical installation.

The main fuse has blown.

• Replace the fuse.

The selector dial is not correctly positioned and the button Start

has not been pressed.

• Please turn the selector dial and press the button Start again.

The delay start has been selected.

• If the laundry are to be washed immediately, cancel the delay

start.

The machine does not fill:

The water tap is closed.

• Open the water tap.

The inlet hose is squashed or kinked.

• Check the inlet hose connection.

The filter in the inlet hose is blocked.

• Clean the water inlet hose filter.

The door is not properly closed.

• Close the door firmly.

The machine fills then emp-

ties immediately:

The end of the drain hose is too low.

• Refer to relevant paragraph in «Installation» chapter.

The machine does not

empty and/or does not

spin:

The drain hose is squashed or kinked.

• Check the drain hose connection.

An option or a programme that ends with the water still in the tub

or that eliminates all the spinning phases has been selected.

• Select the draining or spinning programme.

The laundry is not evenly distributed in the drum.

• Redistribute the laundry.

There is water on the floor:

Too much detergent or unsuitable detergent (creates too much

foam) has been used.

• Reduce the detergent quantity or use another one.

Check whether there are any leaks from one of the inlet hose fit-

tings. It is not always easy to see this as the water runs down the

hose; check to see if it is damp.

• Check the water inlet hose connection.

The drain or inlet hose is damaged.

• Change it with a new one.

Unsatisfactory washing re-

sults:

Too little detergent or unsuitable detergent has been used.

• Increase the detergent quantity or use another one.

Stubborn stains have not been treated prior to washing.

• Use commercial products to treat the stubborn stains.

The correct temperature was not selected.

• Check if you have selected the correct temperature.

Excessive laundry load.

• Reduce the laundry load.

The door will not open:

The programme is still running.

• Wait the end of washing cycle.

The door lock has not been released.

• Wait until the indicator light for door locked has gone out.

There is water in the drum.

• Select drain or spin programme to empty out the water.

16 electrolux

Problem Possible cause/Solution

The machine vibrates is

noisy:

The transit bolts and packing have not been removed.

• Check the correct installation of the appliance.

The support feet have not been adjusted

• Check the correct levelling of the appliance.

The laundry is not evenly distributed in the drum.

• Redistribute the laundry.

Maybe there is very little laundry in the drum.

• Load more laundry.

Spinning starts late or the

machine does not spin:

The electronic unbalance detection device has cut in because the

laundry is not evenly distributed in the drum. The laundry is redis-

tributed by reverse rotation of the drum. This may happen several

times before the unbalance disappears and normal spinning can

resume. If, after 10 minutes, the laundry is still not evenly distrib-

uted in the drum, the machine will not spin. In this case ,redistrib-

ute the load manually and select the spin programme.

• Redistribute the laundry.

The load is too small.

• Add more items, redistribute the load manually and then select

the spinning programme.

No water is visible in the

drum:

Machines based on modern technology operate very economically

using very little water without affecting performance.

If you are unable to identify or solve the

problem, contact our service centre. Before

telephoning, make a note of the model, se-

rial number and purchase date of your ma-

chine: the Service Centre will require this in-

formation.

Mod. ... ... ...

Prod. No. ... ... ...

Ser. No. ... ... ...

TECHNICAL DATA

Dimensions Width

Height

Depth

50 cm

67 cm

55 cm

Electrical connection

Voltage - Overall power - Fuse

Information on the electrical connection is given on the rating

plate, on the inner edge of the appliance door.

Water supply pressure Minimum

Maximum

0,05 MPa

0,8 MPa

Maximum Load Cotton 3 kg

Spin Speed Maximum 1000 rpm

electrolux 17

CONSUMPTION VALUES

The data of this table are approximate. Different causes can change the data: the

quantity and type of laundry, the water and ambient temperature.

Programmes Load

(kg)

Energy con-

sumption

(kWh)

Water con-

sumption (li-

tre)

Approximate

programme

duration (mi-

nutes)

Remaining

moisture

(%)

Cottons 60 °C 3 0.9 45 120 60

Cottons 40 °C 3 0.45 45 110 60

Synthetics 40 °C 1,5 0.5 50 80 37

Delicates 40 °C 1,5 0.5 52 70 37

Wool/Hand wash

30 °C

1 0.3 60 75 32

Standard cotton programmes

Standard 60 °C

cotton

3 0.59 42 127 60

Standard 60 °C

cotton

1,5 0.54 38 127 60

Standard 40 °C

cotton

1,5 0.49 38 137 60

1) At the end of spin phase.

Off Mode (W) Left On Mode (W)

0.10 0.98

The information given in the charts above are in compliance with the EU Commission regulation

2015/2010 implementing directive 2009/125/EC.

INSTALLATION

LIFTING THE MACHINE

Be careful when lifting the machine. Incor-

rect methods of lifting can cause physical

injuries and also increase the risk of dam-

age to the machine. Open the door and

take hold of the top inside of the door

opening. You can also lift the machine by

gripping the rear overhang of the top.

Warning! Never lift the machine by

gripping it’s control panel, door, or

detergent dispenser.

18 electrolux

UNPACKING

When supplied the washing machine is

packed using a number of locking devices/

packing pieces to prevent drum and motor

from damage in transit All transit bolts and

packing must be removed before using the

appliance.

You are advised to keep all transit devices

so that they can be refitted if the machine

ever has to be transported again.

1. Spread some of the polystyrene pack-

aging materials on the floor behind the

machine and then lay the machine

carefully rear side down on them. Make

sure that no hoses are crushed in the

process. Remove the polystyrene base

from the bottom of the appliance.

2. Return machine to it's upright position

and remove the power supply cable

and the draining and inlet hose from the

hose holders on the rear of the appli-

ance.

3. With a suitable spanner unscrew and

remove the three screws and their

spacers on machine's rear.

4. The three holes must then be plugged

with the plastic plug caps supplied in

the bag containing the instruction

booklet, which can be found inside the

drum.

electrolux 19

POSITIONING

Install the machine on a flat hard floor.

Make sure that air circulation around the

machine is not impeded by carpets, rugs

etc. Check that the machine does not

touch the wall or furniture. Level the wash-

ing machine by raising or lowering the two

front feet. If necessary, check the setting

with a spirit level. Any necessary adjustment

can be made with a spanner. Accurate lev-

elling prevents vibration, noise and dis-

placement of the machine during operation.

Caution! Never place cardboard,

wood or similar materials under the

machine to compensate for any

unevenness in the floor.

WATER INLET

Warning! This appliance must be

connected to a cold water supply.

1. Connect the water inlet hose supplied

with the machine to a tap with a 3/4"

thread. Always use the hose supplied

with the appliance.

If necessary, use the suitable or sup-

plied restrictor (1/2”).

Important! Do not use the hose from

your previous machine to connect to

the water supply.

2. The machine end of the inlet hose can

be turned in any direction. Set the hose

correctly by loosening the ring nut. Af-

ter positioning the inlet hose, be sure to

tighten the ring nut again to prevent

leaks.

20 electrolux

La pagina sta caricando ...

Electrolux EWC1050 Manuale utente

Marca: Electrolux

Modello: EWC1050

Categoria: Lavatrici

Tipo: Manuale utente

Scarica il pdf

rapporto

in altre lingue

English: Electrolux EWC1050 User manual

Electrolux EWC1050 Manuale utente

Electrolux EWC1050 Manuale utente

in altre lingue

Documenti correlati

Altri documenti