Electrolux EWC1350 Manuale utente

Marca: Electrolux

Modello: EWC1350

Categoria: Lavatrici

Tipo: Manuale utente

user manual

istruzioni per l’uso

Washing Machine

Lavabiancheria

EWC 1350

Electrolux. Thinking of you.

Share more of our thinking at www.electrolux.com

CONTENTS

Safety information 2

Product description 3

Control panel 5

Before first use 6

Daily use 6

Helpful hints and tips 9

Washing programmes 11

Care and cleaning 12

What to do if… 14

Technical data 16

Installation 16

Environment concerns 19

Subject to change without notice

SAFETY INFORMATION

Important! Read carefully & keep for future

reference.

• The safety of Your appliance complies

with the industry standards and with legal

requirements on the safety of appliances.

However, as manufacturers, we feel it is

our duty to provide the following safety

notes.

• It is most important that this instruction

book should be retained with the appli-

ance for future reference. Should the ap-

pliance be sold or transferred to another

owner, or should you move house and

leave the appliance, always ensure that

the book is supplied with the appliance in

order that the new owner can get to

know the functioning of the appliance

and the relevant warnings.

• You MUST read them carefully before in-

stalling or using the appliance.

• Before first starting up, check the appli-

ance for any damage incurred during

transport. Never connect up a damaged

appliance . If parts are damaged, contact

your supplier.

• If the appliance is delivered in the winter

months when there are minus tempera-

tures. Store it at room temperature for 24

hours before using for the first time.

General safety

• It is dangerous to alter the specifications

or attempt to modify this product in any

way.

• During high temperature wash pro-

grammes the door glass may get hot. Do

not touch it!

• Make sure that small pets and children

do not climb into the drum. To avoid this,

please check into the drum before using.

• Any objects such as coins, safety pins,

nails, screws, stones or any other hard,

sharp material can cause extensive dam-

age and must not be placed into the ma-

chine.

• Only use the advised quantities of fabric

softener and detergent. Damage to the

fabric can ensue if you over-fill. Refer to

the manufacturer’s recommendations of

quantities.

• Wash small items such as socks, laces,

washable belts etc in a washing bag or

pillow case as it is possible for such

items to slip down between the tub and

the inner drum.

• Do not use your washing machine to

wash articles with whalebones, material

without hems or torn material.

• Always unplug the appliance and turn off

the water supply after use, cleaning and

maintenance.

• Under no circumstances should you at-

tempt to repair the machine yourself. Re-

pairs carried out by inexperienced people

may cause injury or serious malfunction-

ing. Contact your local Service Centre.

Always insist on genuine spare parts.

Installation

• This appliance is heavy. Care should be

taken when moving it.

• When unpacking the appliance, check

that it is not damaged. If in doubt, do not

use it and contact the Service Centre.

• All packing and transit bolts must be re-

moved before use. Serious damage can

2 electrolux

occur to the product and to property if

this is not adhered to. See relevant sec-

tion in the user manual.

• After having installed the appliance,

check that it is not standing on the inlet

and drain hose and the worktop is not

pressing the electrical supply cable

against the wall.

• If the machine is situated on a carpeted

floor, please adjust the feet in order to al-

low air to circulate freely under the appli-

ance.

• Always be sure, that there is no water

leakage from hoses and their connec-

tions after the installation.

• If the appliance is installed in a location

subject to frost, please read the “dangers

of freezing” chapter.

• Any plumbing work required to install this

appliance should be carried out by a

qualified plumber or competent person.

• Any electrical work required to install this

appliance should be carried out by a

qualified electrician or competent person.

Use

• This appliance is designed for domestic

use. It must not be used for purposes

other than those for which it was de-

signed.

• Only wash fabrics which are designed to

be machine washed. Follow the instruc-

tions on each garment label.

• Do not overload the appliance. See the

Washing Programme Table.

• Before washing, ensure that all pockets

are empty and buttons and zips are fas-

tened. Avoid washing frayed or torn arti-

cles and treat stains such as paint, ink,

rust, and grass before washing. Under-

wired bras must NOT be machine wash-

ed.

• Garments which have been in contact

with volatile petroleum products should

not be machine washed. If volatile clean-

ing fluids are used, care should be taken

to ensure that the fluid is removed from

the garment before placing in the ma-

chine.

• Never pull the power supply cable to re-

move the plug from the socket; always

take hold of the plug itself.

• Never use the appliance if the power

supply cable, the control panel, the work-

ing surface or the base are damaged so

that the inside of the washing machine is

accessible.

Child safety

• This appliance is not intended for use by

person (including children) with reduced

physical sensory or mental capabilities or

lack of experience and knowledge unless

they have been given supervision or in-

struction concerning use of the appliance

by a person responsible for their safety.

• Young children should be supervised to

ensure that they do not play with the ap-

pliance

• The packaging components (e.g. plastic

film, polystyrene) can be dangerous to

children - danger of suffocation! Keep

them out of children’s reach.

• Keep all detergents in a safe place out of

children’s reach.

• Make sure that children or pets do not

climb into the drum.

PRODUCT DESCRIPTION

Your new appliance meets all modern requirements for effective treatment of laundry

with low water, energy and detergent consumption. Its new washing system allows to-

tal use of detergent and reduces water consumption so saving energy.

electrolux 3

Machine front

1 2

1 Detergent dispenser drawer

2 Control panel

3 Door opening handle

4 Adjustable feet (front)

Machine rear

1 Transit locking devices

2 Drain hose

3 Electrical lead

4 Inlet hose

4 electrolux

Detergent dispenser drawer

Compartment for powder or liquid de-

tergent used for main wash. If using liquid

detergent pour it just before starting the

programme.

Compartment for liquid additives (fabric

softener, starch).

Any fabric softener or starching additives

must be poured into the compartment be-

fore starting the wash programme.

Prewash detergent is to be added straight into the drum.

CONTROL PANEL

Henceforth, the programme selector dial, the spin selector dial, programme progress

lights and different buttons will be indicated in all the book with the relevant numbers

given below.

5 6 7

1 Detergent drawer

QUICK/EXTRA QUICK button

(Court/Kurz-Extra Court/Extra Kurz)

3 PREWASH button (Prélavage/Vor-

wäsche)

ECONOMY button (Eco/Spar)

SUPER RINSE button (Rinçage Plus/

Spülen Plus)

START/PAUSE button (Marche/

Pause - Start/Pause)

Programme progress display

8 SPIN reduction selector

Programme selector dial

Extra Quick

Very short programme for lightly soiled

laundry, except for wool. The washing time

will be reduced approx. 30 minutes for cot-

ton and by 20 minutes for synthetic. The

machine will perform 1 rinse less.

Quick

By selecting this option the washing time

will be reduced approx. 10 minutes. This

electrolux 5

option is recommended for lightly soiled

white-/coloured and synthetic laundry.

Prewash

By selecting this option the machine per-

forms a prewash cycle before the main

wash phase. The washing time will be pro-

longed. This option is recommended for

heavily soiled laundry.

Economy

Only for cottons and synthetic items lightly

or normally soiled at a temperature of 40°C

or higher. The washing time will be pro-

longed and the washing temperature will be

reduced. You can use this option if you

want to wash normally soiled laundry and at

the same time save energy.

Super Rinse

This appliance is designed for saving ener-

gy. If it necessary to rinse the laundry using

an extra quantity of water (super rinse), se-

lect this option. Some additional rinses will

be performed. This option is recommended

for people who are allergic to detergents,

and in areas where the water is very soft.

Start Pause

This button allows you to start or to inter-

rupt the selected programme.

Display

The light Waschen/Lavage illuminates

when the machine is performing the wash-

ing phase.

The light Spülen/Rinçage illuminates when

the machine is rinsing.

The light Schleudern/Essorage illumi-

nates when the machine is spinning.

The light Ende/Fin illuminates at the end

of the washing cycle.

The light Tür/Porte indicates if the door

can be opened:

• The light is lit: the door cannot be

opened.

• The light is out: the door can be opened.

• The light is flashing: the door can soon

be opened.

Spin Reduction Dial

By turning the spin speed selector you can

change the spin speed of the selected pro-

gramme or to select «Rinse hold» or «No

spin»option.

Programme Selector Dial

It allows you to switch the appliance on/off

and/or to select a programme.

BEFORE FIRST USE

Warning!

Ensure that the electrical and water con-

nections comply with the installation in-

structions.

Important! Remove any material from the

drum.

Important! We recommend you to run a

wash programme without any load, to clear

any residues which may have been left by

the manufacturing process. Pour approx.

100 ml of detergent straight into the drum

and run a cotton cycle at 60°C. When the

programme is finished the machine will be

ready to use.

DAILY USE

Load the laundry

Open the door by carefully pulling the door

handle outwards. Place the laundry in the

drum, one item at a time, shaking them out

as much as possible. Close the door.

6 electrolux

Measure out the detergent and the

fabric softener

Pull out the dispenser drawer until it stops.

Measure out the amount of detergent re-

quired, pour it into the larger compartment

on the left

If required, pour fabric softener into the

smaller compartment marked

(the

amount used must not exceed the «MAX»

mark in the drawer). Close the drawer gen-

tly.

Select the required programme by

means of the programme selector dial

(9)

Turn the programme selector dial to the re-

quired programme. The selector can be

turned either clockwise or anticlockwise.

The green light of button 6 starts to flash

On programme progress display the pilot

lights corresponding to all phases compos-

ing the selected programme are lit.

On position "Aus/Arrêt" the programme is

reset and the machine is switched OFF.

At the end of the programme the selec-

tor dial must be turned to position

"Aus/Arrêt" to switch the machine off.

Important! If you turn the programme

selector dial to another programme when

the machine is working, the lights in the

programme progress display will start to

flash to indicate a wrong selection. The

machine will not perform the new selected

programme.

Select the spin speed, Rinse Hold or No

spin option (8)

Select the spin speed, Rinse Hold option or

No Spin option by turning the spin speed

selector.

• The position 1300 is equivalent to 900

rpm for the synthetic and wool pro-

grammes and 700 rpm for the delicate

wash programme.

• The position 500 is equivalent to 500 rpm

for the synthetic and wool programmes

and 450 rpm for the delicate wash pro-

gramme.

Rinse hold

electrolux 7

By selecting this option the water of the last

rinse is not emptied out to prevent the fab-

rics from creasing. When the programme

has finished, the lights "End" and "Door

locked" are lit to indicate that the water

must be emptied out (See: " At the end of

the programme").

No spin

By selecting this option all the spinning

phases are excluded. To be used for ex-

tremely delicate material. The machine will

add some additional rinses to the cotton

and synthetic programmes.

For the maximum spin speed allowed by

each programme, refer to the chapter

Washing programmes.

Select the desired option by means of

buttons 2, 3, 4 and 5

Depending on the programme, different

functions can be combined. These must be

selected after choosing the desired pro-

gramme and before pressing the button

6.The relevant light will illuminate.

If an incorrect option is selected, the corre-

sponding indicator lamp flashes for about 2

seconds. For the compatibility of the op-

tions with the washing programmes, refer

to the chapter «Washing programmes».

Start the programme by pressing

button 6

To start the selected programme, press this

button; the corresponding pilot light stops

flashing and remains lit.

On programme progress display the pilot

lights "Washing" and "Door" illuminate to in-

dicate that the appliance starts operating

and the door is locked.

Altering an option or a running

programme

It is possible to change any option before

the programme carries it out.

Before you make any change, you must

pause the washing machine by pressing the

button 6.

The programme can be changed as long as

the button 6 has not been pressed. Chang-

ing a running programme is possible only

by resetting it. Turn the programme selector

dial to "Aus/Arrêt" and then to the new

programme position. Start the new pro-

gramme by pressing the button 6 again.

Interrupting a programme

Press the button 6 to interrupt a pro-

gramme which is running, the correspond-

ing light starts to flash. Press the button

again to restart the programme.

Cancelling a programme

Turn the selector dial to "Aus/Arrêt" posi-

tion to cancel a programme which is run-

ning. Now you can select a new pro-

gramme.

Opening the door after the programme

has started

First set the machine to pause by pressing

the button 6.

After some minutes, the door can be

opened, when the following conditions are

observed:

• The water temperature is below 55°C.

• The water level is below the bottom edge

of the door.

• The machine doesn’t spin.

If you cannot open the door but it is abso-

lutely necessary to open it you have to

switch the machine off by turning the selec-

tor dial to "Aus/Arrêt". After few minutes

the door can be opened

(Pay attention to the water level and

temperature!).

After this procedure, it will be necessary to

set the programme and the options again

and then press the button 6.

At the end of the programme

The machine stops automatically.

The pilot light " End" illuminates to indicate

that the programme has finished. The pilot

light "Door" goes out, the door can be

opened and the laundry can be removed.

If at the end of a programme there is water

in the tub (when the Rinse Hold option has

been selected), to empty out the water

follow the following instructions:

8 electrolux

• turn the programme selector dial to

"Aus/Arrêt"

• select the «Drain» or «Spin» programme

• press the "Start" button

When the pilot light "Door" goes out, the

door can be opened and the laundry can

be removed.

At the end of the cycle, turn the programme

selector dial to "Aus/Arrêt" to switch the

machine off.

Remove the laundry from the drum and

carefully check that the drum is empty. If

you do not intend to carry out another

wash, close the water tap.

Leave the door open to prevent the forma-

tion of mildew and unpleasant smells.

HELPFUL HINTS AND TIPS

Sorting out the laundry

Follow the wash code symbols on each

garment label and the manufacturer’s

washing instructions. Sort the laundry as

follows: whites, coloureds, synthetics, deli-

cates, woollens.

Temperatures

95° or 90°

for normally soiled white cot-

tons and linen (e.g. tea cloths,

towels, tablecloths, sheets...)

60°/50°

for normally soiled, colour fast

garments (e.g. shirts, night

dresses, pyjamas....) in linen,

cotton or synthetic fibres and

for lightly soiled white cotton

(e.g. underwear)

40°-30°-

Cold

for delicate items (e.g. net cur-

tains), mixed laundry including

synthetic fibres and woollens

bearing the label «pure new

wool, machine washable, non-

shrink»

Before loading the laundry

Never wash whites and coloureds together.

Whites may lose their «whiteness» in the

wash.

New coloured items may run in the first

wash; they should therefore be washed

separately the first time.

Make sure that no metal objects are

left in the laundry (e.g. hair clips, safety

pins, pins).

Button up pillowcases, close zip fasteners,

hooks and poppers. Tie any belts or long

tapes.

Remove persistent stains before washing.

Rub particularly soiled areas with a special

detergent or detergent paste.

Treat curtains with special care. Remove

hooks or tie them up in a bag or net.

Maximum loads

Recommended loads are indicated in the

washing programme charts.

General rules:

• Cotton, linen: drum full but not too

tightly packed;

• Synthetics: drum no more than half full;

• Delicate fabrics and woollens: drum

no more than one third full.

Washing a maximum load makes the most

efficient use of water and energy.

For heavily soiled laundry, reduce the load

size.

Laundry weights

The following weights are indicative:

bathrobe 1200 g

quilt cover 700 g

man’s work shirt 600 g

sheet, man’s pyjamas 500 g

tablecloth 250 g

pillow case, towelling towel,

night dress, man’s shirt

200 g

tea cloth, ladies’ briefs, nap-

kin, blouse, men’s under-

pants

100 g

Removing stains

Stubborn stains may not be removed by

just water and detergent. It is therefore ad-

visable to treat them prior to washing.

Blood: treat fresh stains with cold water.

For dried stains, soak overnight in water

with a special detergent then rub in the

soap and water.

electrolux 9

Oil based paint: moisten with benzine

stain remover, lay the garment on a soft

cloth and dab the stain; treat several times.

Dried grease stains: moisten with turpen-

tine, lay the garment on a soft surface and

dab the stain with the fingertips and a cot-

ton cloth.

Rust: oxalic acid dissolved in hot water or a

rust removing product used cold. Be careful

with rust stains which are not recent since

the cellulose structure will already have

been damaged and the fabric tends to hole.

Mould stains: treat with bleach, rinse well

(whites and fast coloureds only).

Grass: soap lightly and treat with bleach

(whites and fast coloureds only).

Ball point pen and glue: moisten with

acetone

, lay the garment on a soft cloth

and dab the stain.

Lipstick: moisten with acetone as above,

then treat stains with methylated spirits.

Treat any residual marks with bleach.

Red wine: soak in water and detergent,

rinse and treat with acetic or citric acid,

then rinse. Treat any residual marks with

bleach.

Ink: depending on the type of ink, moisten

the fabric first with acetone

, then with

acetic acid; treat any residual marks on

white fabrics with bleach and then rinse

thoroughly.

Tar stains: first treat with stain remover,

methylated spirits or benzine, then rub with

detergent paste.

Detergents and additives

Good washing results also depend on the

choice of detergent and use of the correct

quantities to avoid waste and protect the

environment.

Although biodegradable, detergents contain

substances which, in large quantities, can

upset the delicate balance of nature.

The choice of detergent will depend on the

type of fabric (delicates, woollens, cottons,

etc.), the colour, washing temperature and

degree of soiling.

All commonly available washing machine

detergents may be used in this appliance:

• powder detergents for all types of fabric

• powder detergents for delicate fabrics

(60°C max) and woollens

• liquid detergents, preferably for low tem-

perature wash programmes (60°C max)

for all types of fabric, or special for wool-

lens only.

The detergent and any additives must be

placed in the appropriate compartments of

the dispenser drawer before starting the

wash programme.

Prewash detergent is to be added

straight into the drum

If using liquid detergents, a programme

without prewash must be selected. Pour

the liquid detergent into the detergent com-

partment immediately before you start the

programme.

Your appliance incorporates a recirculation

system which allows an optimal use of the

concentrated detergent.

Follow the product manufacturer’s recom-

mendations on quantities to use and do

not exceed the «MAX» mark in the de-

tergent dispenser drawer.

Degrees of water hardness

Water hardness is classified in so-called

“degrees” of hardness. Information on hard-

ness of the water in your area can be ob-

tained from the relevant water supply com-

pany, or from your local authority. If the wa-

ter hardness degree is medium or high we

suggest you to add a water softener follow-

ing always the manufacturer’s instructions.

When the degree of hardness is soft, read-

just the quantity of the detergent.

1) do not use acetone on artificial silk

10 electrolux

WASHING PROGRAMMES

Programme/ Tem-

perature

Type of laundry Options

Description of the

programme

COTTON

Koch-/Buntwäsche -

Coleurs

95°

White cotton (heavily

soiled cotton items)

Spin reduction/Rinse

Hold/No Spin - Extra

Quick/Quick

-Pre-

wash - Eco - Rinse

Plus

Main wash

Rinses

Long spin max. 1300

rpm

Max load 3 kg

COTTON

Koch-/Buntwäsche -

Coleurs

60° - COLD

Coloured cotton (nor-

mally soiled cotton

items)

Spin reduction/Rinse

Hold/No Spin - Extra

Quick/Quick

- Pre-

wash - Eco

- Rinse

Plus

Main wash

Rinses

Long spin max. 1300

rpm

Max load 3 kg

SYNTHETIC

Pflegeleicht - Synthé-

tiques

60°-30°

Synthetic or mixed

fabrics: underwear,

coloured garments,

non-shrink shirts, blou-

ses.

Spin reduction/Rinse

Hold/No Spin - Extra

Quick/Quick

- Pre-

wash - Eco

- Rinse

Plus

Main wash

Rinses

Short spin max. 900

rpm

Max Load 1,5 kg

DELICATES

Feinwäsche - Délicats

40°-30°

Delicate fabrics:

acrylics, viscose, poly-

ester.

Spin reduction/Rinse

Hold/No Spin - Extra

Quick

- Prewash -

Rinse Plus

Main wash

Rinses

Short spin max. 700

rpm

Max Load 1,5 kg

WOOL

Wolle - Laine

30°-COLD

Washing programme

for machine washable

wool as well as for

hand washable wool-

lens and delicate fab-

rics.

Spin reduction/Rinse

Hold/No Spin

Main wash

Rinses

Short spin max. 900

rpm

Max Load 1 kg

RINSES

Spülen - Rinçages

With this programme it

is possible to rinse and

spin cotton garments

which have been

washed by hand. The

machine performs 3

rinses, followed by a fi-

nal long spin. The spin

speed can be reduced.

Spin reduction/Rinse

Hold/No Spin - Rinse

Plus

Rinses

Spin max. 1300 rpm

Max Load 3 kg

DRAIN

Pumpen - Vidange

For emptying out the

water of the last rinse

in programmes with

the Rinse Hold option

selected.

Draining of water

Max Load 3 kg

SPIN

Schleudern - Essorage

Separate spin for hand

washed garments and

after programmes with

the Rinse Hold option

selected. You can

choose the spin speed

by turning the spin

speed selector to

adapt it to the fabrics

to be spun.

Spin reduction

Drain and long spin

Max. spin speed 1300

rpm

Max Load 3 kg

electrolux 11

Programme/ Tem-

perature

Type of laundry Options

Description of the

programme

Reset/

"Aus/Arrêt"

For resetting the programme or switching the machine off

1) If you select this option, we recommend that you reduce the maximum load. Recommended load for cotton is 2

kg. This option cannot be selected together with Economy option.

2) Available at the temperature 60° and 40°.

3) Available at the temperature 60°.

CARE AND CLEANING

Important! You must DISCONNECT the

appliance from the electricity supply, before

you can carry out any cleaning or

maintenance work.

Descaling

The water we use normally contains lime. It

is a good idea to periodically use a water

softening powder in the machine. Do this

separately from any laundry washing, and

according to the softening powder manu-

facturer's instructions. This will help to pre-

vent the formation of lime deposits.

Maintenance Wash

With the use of low temperature washes it

is possible to get a build up of residues in-

side the drum.

We recommend that a maintenance wash

be performed on a regular basis.

To run a maintenance wash:

• The drum should be empty of laundry.

• Select the hottest cotton wash pro-

gramme.

• Use a normal measure of detergent,

must be a powder with biological proper-

ties.

External cleaning

Clean the exterior cabinet of the appliance

with soap and water only, and then dry

thoroughly.

Cleaning the dispenser drawer

The washing powder and additive dispens-

er drawer should be cleaned regularly.

1. If necessary, the whole detergent draw-

er can be taken out of the machine for

cleaning. You need to pull it firmly out-

wards, so that it comes free of retaining

stop.

2. To remove the siphon at the inside edge

of the drawer for cleaning, you need to

press it inwards and pull it upwards at

the same time. Flush it out under a tap,

to remove any traces of accumulated

powder. When you put it back, press it

downwards until you hear a distinct

click.

12 electrolux

Cleaning the drawer recess

Having removed the drawer, use a small

brush to clean the recess, ensuring that all

washing powder residue is removed from

the upper and lower part of the recess.

Replace the drawer and run the rinse pro-

gramme without any clothes in the drum.

Cleaning the water inlet filter

If your water is very hard or contains traces

of lime deposit, the water inlet filter may be-

come clogged. It is therefore a good idea to

clean it from time to time.

Turn off the water tap. Unscrew the water

inlet hose. Clean the filter using a hard bris-

tle brush. Tighten up the inlet hose.

The dangers of freezing

If the machine is exposed to temperatures

below 0°C, certain precautions should be

taken.

• Turn off the water supply.

• Unscrew the inlet hose from the supply

tap.

• Select a wash programme, start the ma-

chine and let the programme run for a

short time.

• Interrupt the programme by turning the

programme selector to

position.

• Place the end of inlet and drain hoses

down low, into the waste gully (floor

drain) set into the floor. Make sure that

the end of the hose does not go below

the water level in the gully's (drain's) wa-

ter tap.

• Select the programme "Drain" and let it

run until it is finished.

•

Turn the programme selector to

position. When you intend to start the

machine up again, make sure that the

room temperature is above 0 °C.

The appliance is only to be used and stored

indoors at normal room temperature. The

manufacturer is not responsible for any

frost damage.

electrolux 13

WHAT TO DO IF…

Certain problems are due to lack of simple

maintenance or oversights, which can be

solved easily without calling out an engi-

neer. Before contacting your local Service

Centre, please carry out the checks listed

below.

During machine operation it is possible that

the End pilot light blinks to indicate that the

machine is not working:

• 1 flash: problem with the water supply.

• 2 flashes: problem with the water drain-

ing.

• 4 flashes: door open.

Once the problem has been eliminated,

press the button START to restart the pro-

gramme. If after all checks, the problem

persists, contact your local Service Centre.

Problem Possible cause/Solution

The machine does not start:

The door has not been closed.

• Close the door firmly.

The plug is not properly inserted in the power socket.

• Insert the plug into the power socket.

There is no power at the socket.

• Please check your domestic electrical installation.

The main fuse has blown.

• Replace the fuse.

The selector dial is not correctly positioned and the button Start

has not been pressed.

• Please turn the selector dial and press the button Start again.

The machine does not fill:

The water tap is closed.

• Open the water tap.

The inlet hose is squashed or kinked.

• Check the inlet hose connection.

The filter in the inlet hose is blocked.

• Clean the water inlet hose filter.

The door is not properly closed.

• Close the door firmly.

The machine fills then emp-

ties immediately:

The end of the drain hose is too low.

• Refer to relevant paragraph in «Installation» chapter.

The machine does not

empty and/or does not

spin:

The drain hose is squashed or kinked.

• Check the drain hose connection.

An option or a programme that ends with the water still in the tub

or that eliminates all the spinning phases has been selected.

• Select the draining or spinning programme.

The laundry is not evenly distributed in the drum.

• Redistribute the laundry.

There is water on the floor:

Too much detergent or unsuitable detergent (creates too much

foam) has been used.

• Reduce the detergent quantity or use another one.

Check whether there are any leaks from one of the inlet hose fit-

tings. It is not always easy to see this as the water runs down the

hose; check to see if it is damp.

• Check the water inlet hose connection.

The drain or inlet hose is damaged.

• Change it with a new one.

14 electrolux

Problem Possible cause/Solution

Unsatisfactory washing re-

sults:

Too little detergent or unsuitable detergent has been used.

• Increase the detergent quantity or use another one.

Stubborn stains have not been treated prior to washing.

• Use commercial products to treat the stubborn stains.

The correct temperature was not selected.

• Check if you have selected the correct temperature.

Excessive laundry load.

• Reduce the laundry load.

The door will not open:

The programme is still running.

• Wait the end of washing cycle.

The door lock has not been released.

• Wait until the indicator light for door locked has gone out.

There is water in the drum.

• Select drain or spin programme to empty out the water.

The machine vibrates is

noisy:

The transit bolts and packing have not been removed.

• Check the correct installation of the appliance.

The support feet have not been adjusted

• Check the correct levelling of the appliance.

The laundry is not evenly distributed in the drum.

• Redistribute the laundry.

Maybe there is very little laundry in the drum.

• Load more laundry.

Spinning starts late or the

machine does not spin:

The electronic unbalance detection device has cut in because the

laundry is not evenly distributed in the drum. The laundry is redis-

tributed by reverse rotation of the drum. This may happen several

times before the unbalance disappears and normal spinning can

resume. If, after 10 minutes, the laundry is still not evenly distrib-

uted in the drum, the machine will not spin. In this case ,redistrib-

ute the load manually and select the spin programme.

• Redistribute the laundry.

The load is too small.

• Add more items, redistribute the load manually and then select

the spinning programme.

No water is visible in the

drum:

Machines based on modern technology operate very economically

using very little water without affecting performance.

If you are unable to identify or solve the

problem, contact our service centre. Before

telephoning, make a note of the model, se-

rial number and purchase date of your ma-

chine: the Service Centre will require this in-

formation.

Mod. ... ... ...

Prod. No. ... ... ...

Ser. No. ... ... ...

electrolux 15

TECHNICAL DATA

Dimensions Width

Height

Depth

67 cm

49,5 cm

51,5 cm

Electrical connection

Voltage - Overall power - Fuse

Information on the electrical connection is given on the rating

plate, on the inner edge of the appliance door.

Water supply pressure Minimum

Maximum

0,05 MPa

0,8 MPa

Maximum Load Cotton 3 kg

Spin Speed Maximum 1300 rpm

INSTALLATION

Lifting the machine

Be careful when lifting the machine. Incor-

rect methods of lifting can cause physical

injuries and also increase the risk of dam-

age to the machine. Open the door and

take hold of the top inside of the door

opening. You can also lift the machine by

gripping the rear overhang of the top.

Warning! Never lift the machine by

gripping it’s control panel, door, or

detergent dispenser.

Unpacking

When supplied the washing machine is

packed using a number of locking devices/

packing pieces to prevent drum and motor

from damage in transit All transit bolts and

packing must be removed before using the

appliance.

You are advised to keep all transit devices

so that they can be refitted if the machine

ever has to be transported again.

1. Spread some of the polystyrene pack-

aging materials on the floor behind the

machine and then lay the machine care-

fully rear side down on them. Make sure

that no hoses are crushed in the proc-

ess. Remove the polystyrene base from

the bottom of the appliance.

16 electrolux

2. Return machine to it's upright position

and remove the power supply cable and

the draining and inlet hose from the

hose holders on the rear of the appli-

ance.

3. With a suitable spanner unscrew and re-

move the three screws and their

spacers on machine's rear.

4. The three holes must then be plugged

with the plastic plug caps supplied in

the bag containing the instruction book-

let, which can be found inside the drum.

Positioning

Install the machine on a flat hard floor.

Make sure that air circulation around the

machine is not impeded by carpets, rugs

etc. Check that the machine does not

touch the wall or furniture. Level the wash-

ing machine by raising or lowering the two

front feet. If necessary, check the setting

with a spirit level. Any necessary adjustment

can be made with a spanner. Accurate lev-

elling prevents vibration, noise and dis-

placement of the machine during operation.

Caution! Never place cardboard,

wood or similar materials under the

machine to compensate for any

unevenness in the floor.

Water inlet

Warning! This appliance must be

connected to a cold water supply.

electrolux 17

1. Connect the water inlet hose supplied

with the machine to a tap with a 3/4"

thread. Always use the hose supplied

with the appliance.

Important! Do not use the hose from

your previous machine to connect to

the water supply.

2. The machine end of the inlet hose can

be turned in any direction. Set the hose

correctly by loosening the ring nut. After

positioning the inlet hose, be sure to

tighten the ring nut again to prevent

leaks.

The inlet hose must not be lengthened. If it

is too short and you do not wish to move

the tap, you will have to purchase a new,

longer hose specially designed for this type

of use.

Important! Before connecting up the

machine to new pipework or to pipework

that has not been used for some time, run

off a reasonable amount of water to flush

out any debris that may have collected in

the pipes.

Water drainage

The end of the drain hose can be posi-

tioned in three ways:

Hooked over the edge of a sink using

the plastic hose guide supplied with

the machine.

In this case, make sure the end cannot

come unhooked when the machine is emp-

tying. This could be done by tying it to the

tap with a piece of string or attaching it to

the wall.

In a sink drain pipe with a trap.

650-800 mm

The drain hose can be connected directly

into the pipe (e.g. beneath a washtub or

sink), above the water trap. The drain hose

must be arranged so that some part of it’s

length is routed up to a level corresponding

to the top edge of the tub and fixed in place

there.

18 electrolux

Directly into a drain pipe at a height of

not less than 65 cm and not more than 80

cm.

Their must be an air gap around and below

the end of drain hose. This means that the

internal diameter of the standpipe must be

larger than the outer diameter of the hose.

650-800 mm

40 mm

The hose must not be sticked into the

standpipe more than 50 mm and it has to

be fixed in this position. The drain hose

must not be kinked.

The drain hose can be extended up to total

3,5 m. For the extension piece use a hose

with an internal diameter at least as large as

that of the machine's own hose. Use a suit-

able hose connector.

Information on the electrical connection is

given on the rating plate on the inner edge

of the appliance door.

Check that your domestic electrical installa-

tion can take the maximum load required,

also taking into account any other applian-

ces in use.

Connect the machine to an earthed

socket.

The manufacturer does not accept

any responsibility for damage or

injury through failure to comply

with the above safety precaution.

The power supply cable must be

easily accessible after installing the

machine.

Should the appliance power supply

cable need to be replaced, this

must be carried out by a Service

Centre.

ENVIRONMENT CONCERNS

The symbol on the product or on its

packaging indicates that this product may

not be treated as household waste. Instead

it should be taken to the appropriate

collection point for the recycling of electrical

and electronic equipment. By ensuring this

product is disposed of correctly, you will

electrolux 19

help prevent potential negative

consequences for the environment and

human health, which could otherwise be

caused by inappropriate waste handling of

this product. For more detailed information

about recycling of this product, please

contact your local council, your household

waste disposal service or the shop where

you purchased the product.

Packaging materials

The materials marked with the symbol

are recyclable.

>PE<=polyethylene

>PS<=polystyrene

>PP<=polypropylene

This means that they can be recycled by

disposing of them properly in appropriate

collection containers.

Ecological hints

To save water, energy and to help protect

the environment, we recommend that you

follow these tips:

• Normally soiled laundry may be washed

without prewashing in order to save de-

tergent, water and time (the environment

is protected too!).

• The machine works more economically if

it is fully loaded.

• With adequate pre-treatment, stains and

limited soiling can be removed; the laun-

dry can then be washed at a lower tem-

perature.

• Measure out detergent according to the

water hardness, the degree of soiling and

the quantity of laundry being washed.

20 electrolux

La pagina si sta caricando...

Electrolux EWC1350 Manuale utente

Marca: Electrolux

Modello: EWC1350

Categoria: Lavatrici

Tipo: Manuale utente

Scarica PDF

rapporto

in altre lingue

English: Electrolux EWC1350 User manual

Electrolux EWC1350 Manuale utente

Electrolux EWC1350 Manuale utente

in altre lingue

Documenti correlati

Altri documenti