Panasonic Cordless Telephone KX-TCD650E Manuale utente

Marca: Panasonic

Modello: Cordless Telephone KX-TCD650E

Categoria: Telefoni

Tipo: Manuale utente

Questo manuale è adatto anche per

Safety Information . . . . . . . . . . . .2

Accessories . . . . . . . . . . . . . . . . .2

Setting Up . . . . . . . . . . . . . . . . . .3

Using the Telephone . . . . . . . . . .4

Additional Features . . . . . . . . . . .9

Handset Settings . . . . . . . . . . . .10

Base Unit Settings . . . . . . . . . . .13

Initial Settings . . . . . . . . . . . . . .16

For Optional Multi Unit Users . .17

Before Requesting Help . . . . . . .20

Index . . . . . . . . . . . . . . . . . . . . .22

Caller ID compatible

Please read before use and save

Charge the batteries for approx. 15 hours before initial use

Model No:

KX-TCD650E

Digital

Cordless Phone

Operating Instructions

& Quick Guide

Centre Page Pullout

650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 1

Safety Information

(Included)

AC Adaptor 1

PQLV19E

Telephone Line 1

Cord

PQJA87S

Batteries (AA Size) 2 batteries

N4DH33B00001

HHR-6P/2SA1

Battery Cover 1

PQKK10109Y6

Operating 1

Instructions

QUQX00018Z

Additional accessories are available

for purchase. Contact your

Panasonic Customer Care Helpline

for further details.



U.K. 08700 100 076

R.O.I. 01289 8333

Accessories

Only use the power supply included

with the product.

Do not connect the AC Adaptor to any

AC outlet other than the

standard AC220-240V.

The apparatus is approved for use

with PQLV19E power supply.

This apparatus is unable to make

emergency telephone calls under the

following conditions:

The portable handset batteries

need recharging, or have failed.

During a mains power failure.

When the Key Lock is set to

ON.

When the unit is in Direct Call

mode.

Do not open the base unit or handset

(other than to change the batteries).

This apparatus should not be used

near emergency/intensive care

medical equipment and should not be

used by people with pacemakers.

Care should be taken that objects do

not fall onto, and liquids are not

spilled into the unit. Do not subject

this unit to excessive smoke, dust,

mechanical vibration or shock.

Environment

Do not use this unit near water.

This unit should be kept away from

heat sources such as radiators,

cookers, etc. It should also not be

placed in rooms where the

temperature is less than 5

C or

greater than 40

The AC Adaptor is used as the main

disconnect device, ensure that the AC

outlet is located / installed near the

unit and is accessible.

WARNING:

TO PREVENT THE RISK OF

ELECTRICAL SHOCK, DO NOT

EXPOSE THIS PRODUCT TO

RAIN OR ANY OTHER TYPE OF

MOISTURE.

Battery Caution

Use only specified batteries.

Only use rechargeable batteries.

Do not mix old and new batteries.

Do not dispose of batteries in a fire,

they may explode. Check local waste

management codes for special

disposal instructions.

Do not open or mutilate the

batteries. Released electrolyte is

corrosive and may cause burns or

injury to the eyes or skin. The

electrolyte may be toxic if swallowed.

Exercise care in handling the

batteries in order not to short the

batteries with conductive materials

such as rings, bracelets and keys.

The batteries and/or conductor may

overheat and cause burns.

Charge the batteries provided in

accordance with the information

given in this operating guide.

2 Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333

General Safety

650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 2

Insert the Batteries

This unit can be mounted on a wall.

Insert screws into wall. The centres

of the screw holes should be 6cm

vertically apart.

Connect the AC adaptor and the

telephone line cord.

Arrange the wires as shown, then

mount the unit.

Wall Mounting

For maximum distance noise-free

operation, place your base unit:

-Away from electrical appliances

such as TV, radio, personal

computer or another phone.

-In a convenient high and central

location.

The AC Adaptor must remain

connected at all times. (It is normal

for the adaptor to feel warm during

use).

Location

LINE

Hook

6cm

Notice

Some features described in these

operating instructions/quick guide

are dependent upon subscription to

your Network provider (e.g

Caller ID).

All features of this type

will be marked through-

out the manual with this

icon .

Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333 3

Setting Up

Please note throughout this

operating instructions/quick guide

that the word “PRESS” is depicted

by this symbol Z.

Please ensure the batteries are

inserted as shown.

Connection

Plug in the AC adaptor and the

telephone line cord in order #, $, %.

WARNING:

DO NOT CONNECT THE

TELEPHONE LINE CORD TO

THE PHONE SOCKET & UNTIL

THE HANDSET IS FULLY

CHARGED.

Fasten the AC adaptor cord to

prevent it from being disconnected.

Setting Up

650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 3

If the

ÛÛ

icon flashes after a few

telephone calls even when the

handset batteries have been fully

charged, the batteries must be

replaced.

! Charge new batteries for

approximately 15 hours before

initial use.

(The telephone line cord must

not be connected to the

telephone socket at this time).

If the batteries are removed, the

battery icon is reset to

ÛÛ

(less

than 30% capacity). In this case,

even if fully charged batteries are fit-

ted, the icon remains as

ÛÛ

until a

full charge cycle is complete.

On replacing the batteries, ensure

that the correct battery type is

selected (see ‘Handset Settings’).

! The batteries must be charged

for approximately 15 hours

before initial use.

After the batteries have been

inserted into the handset, place the

handset in the powered up base unit.

(The telephone line cord must

not be connected to the

telephone socket at this time.

Please leave your standard

telephone connected until

battery charging is complete).

The batteries are fully charged only

when

ÒÒ

is flashing.

(Before Initial Use)

(After Initial Use)

Turning the Power ON/OFF

Turn Power OFF

From the standby mode, Z and

hold ± until a long tone sounds.

The display goes blank. If you put

the handset in the base unit, the

battery icon will display.

Answering Calls

When the phone rings,

ZZ‰‰

KK--II

When an external call is incoming,

you can temporarily turn off the

handset ringer.

During an incoming call, Z and

hold U.È is displayed and the

handset ringing stops. (This function

will not work when the handset is on

the base unit or if an internal call is

incoming.)

When the battery icon flashes (and,

if programmed, battery low alarm

sounds), the handset should be

charged immediately because there

is little energy left in the batteries.

Replacing the batteries

Using the Telephone

Battery Charging

Turn Power ON

Z and hold ±.

When button is released, display

changes to the standby mode and a

confirmation tone sounds.

Battery Life

Battery life is dependent on use and

conditions but in general when using

fully charged Ni-MH batteries:

Talk time: 20hrs approx.

Standby time: 200hrs approx.

When using Ni-Cd batteries (based

on 800mA per hour)

Talk time: 12hrs approx.

Standby time: 100hrs approx.

(Times indicated are for peak performance)

The batteries reach peak performance

after several full charge / discharge

cycles.

The batteries cannot be overcharged

unless they are repeatedly removed

and replaced.

If battery life is shortened then

please check that battery and charge

terminals are clean.

For maximum battery life it is

recommended that the handset is not

recharged until battery icon flashes

(

ÛÛ

4 Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333

650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 4

Making Calls

ZZ‰‰

Dial the number.

After a few seconds, the call duration

is displayed. The dialled number is

stored in the redial memory.

When you are finished with the

call,

±.

Alternatively, dial the number,

then Z‰. This procedure

allows you to edit / confirm the

number before dialling.

If you misdial, ZW.

If Î flashes and an alarm tone

sounds when you press ‰, move

closer to the base unit and try

your call again.

During a phone call,

ZZ SS

to change the volume setting to

LOW (o), MEDIUM (oo) or HIGH

(ooo).

Making a Call from the

Redial List

The last 10 numbers dialled are

stored.

From the standby mode

ZZXX

ZZSS

to select number.

(To exit the redial list,

ZZ±±

ZZ‰‰

Caller ID is a service of your

Network provider and will only

operate if you have subscribed to

this feature.

After subscribing to Caller

ID, this phone will display

the callers information.

If your unit is connected to a PBX or

a telephone line that does not

support this service you will not be

able to use it.

Caller ID does not display caller

information while using the handset

for an intercom call. However, the

caller’s information will be stored to

the Caller ID List.

Caller ID Service

Making a Call from the

Caller ID List

The last 50 caller’s phone numbers

are stored in the order the calls were

received.

From the standby mode

ZZSS

The newest number is displayed.

If there are no numbers stored in

the Caller ID list no item is

displayed.

ZZSS

to select number.

ZU to scroll to previous calls

and S to the most recent calls.

Only the most recent call from

the same phone number is stored.

Only 12 digits of a phone number

are displayed. To display the

remaining digits of longer phone

numbers,

ZZCC..

On selection

ZZ‰‰

Redialling

Setting the Receiver

Volume

Redialling the Last

Number Dialled

Using this feature you can locate

a misplaced handset by paging.

ZZÏÏ

on the base unit.

All handsets ring for 1 minute.

ZZÏÏ

again or

ZZ‰‰

on (one of)

the handset(s) to stop ringing.

Using the Telephone

ZZ‰‰

ZZXX

The last number dialled displays and

is dialled.

Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333 5

Handset Locator / Paging

650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 5

To add digits

ZZKK

To clear digits

ZZWW..

Either

ZZ‰‰

to dial or to save

the number,

ZZYY

ssaavvee ssppeeeedd

is displayed.

ZZYY

to save.

(Clear a Number in the

List):

ZZVV..

ZZSS

to select

yyeess

(YES).

ZZVV..

cclleeaarreedd

is displayed, a confirmation

tone sounds and the next number is

displayed. If you clear the last

number,

nnoo iitteemm

is displayed.

(Clear all Numbers in the

List):

ZZVV

ZZSS

to select

yyeess

(YES).

ZZVV..

A confirmation tone sounds and

cclleeaarreedd

, then no item is displayed.

To exit the menu at any time,

ZZ±±

Using the telephone

Making a Call from the

Caller ID List (cont.)

After you have viewed a phone

number, answered the call or called

back the caller, “⁄” is added to the

caller’s number.

After viewing all new Caller ID

numbers, the call counter is reset to

zero.

To exit the Caller ID list

ZZ±±..

Caller ID List Menu /

Redial List Menu

You can save numbers from the

redial list/Caller ID list into speed

dial, edit or clear from memory.

From the standby mode

ZZXX

(to access Redial list) or

ZZSS

(to access Caller ID

list).

ZZSS

to select number

from list.

ZZVV

ssaavvee ssppeeeedd

is displayed.

ZZSS

to select a menu item

then follow the instructions

below.

(Save a Number in the List

as a Speed Dial):

ZZVV

Á is displayed.

ZZYY

(Edit a Number in the List):

ZZVV

ZZTT

to move the edit

point.

Digits are added or deleted to the left

of the flashing digit.

save speed

edit call no

clear

all clear

6 Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333

650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 6

Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333 7

Using the telephone

Speed Dialling

You can store up to 20 telephone

numbers in the handset.

Storing New Numbers

From the standby mode

ZZYY

new speed is displayed.

ZZVV

Á and an index number 00 - 19 is

displayed.

*Enter a phone number (max 24

digits).

ZZYY

saved is displayed. To enter another

number repeat from *.

If speed dial memory is full memory

full is displayed.

You can keep a record of your

Speed Dial numbers in the

reference table included in the

‘Quick Guide’.

Dialling Stored Numbers

ZZÁÁ

ZZSS

to select number.

00 - 19 to select index number

directly.

ZZ‰‰

If you press W, or no digits are

entered for over 1 minute, speed

dial is cancelled.

Saving Numbers to Speed

Dial from Other Lists

Please reference “Caller ID List

Menu/Redial List Menu”.

Speed Dial List Menu

You can edit or clear a speed dial

number from memory or assign a hot

key to any speed dial number.

From the standby mode

ZZÁÁ

ZZSS

to select number

from list.

(Edit the Speed Dial

Number):

ZZVV

ZZTT

to move the edit

point.

Digits are added or deleted to the left

of the flashing digit.

To add digits

ZZKK

To clear digits

ZZWW

ZZYY

to save.

edit

(Clear a Speed Dial

Number):

ZZVV..

ZZSS

to select

yyeess

(YES).

ZZVV..

cclleeaarreedd

is displayed, a confirmation

tone sounds and the next number is

displayed. If you clear the last

number,

nnoo iitteemm

is displayed.

(Register a Speed Dial

Number as a Hot Key

ZZVV

ZZSS

to select a key from

1-9.

If a key has already been assigned as

a hot key, it will flash in the display.

ZZVV

ZZSS

to select

yyeess

(YES).

ZZVV

The speed dial number is displayed

and a confirmation tone sounds.

To exit the menu at any time,

ZZ±±..

clear

hot key reg

ZZVV

eeddiitt

is displayed.

ZZSS

to select a menu item

then follow the instructions that

follow:

650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 7

8 Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333

Using the Telephone

Hot Key

Dialling a Hot Key Number

You can assign the dialling buttons

as hot keys. You can

choose 9 phone numbers from the

speed dial list (See “Register a Speed

Dial Number as a Hot Key”).

and hold a key

The number stored with that key is

displayed.

ZS or U to view other numbers

stored.

‰ to dial.

Clearing Caller

Information from a Hot

Key

and hold a key

The number stored with that key is

displayed.

ZZVV

cclleeaarr

is displayed.

ZZVV

ZZSS

to select

yyeess

(YES).

ZZVV

650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 8

! This function is for PBX

line/long distance service users.

A dialling pause is used when a

pause in the dialling of the phone

number is necessary using a PBX or

accessing a long distance service.

(see “Select Pause Timing”).

For example, when 9 (line access

number) is dialled followed by a

pause to access an outside line

through a PBX:

ZZII

ZZXX

. (‘p’ is displayed on the

LCD).

Enter telephone number.

ZZ‰‰

Entering a pause prevents

misdialling when you redial or dial a

stored number.

Pressing X once creates one

pause. To extend the pause

requirement time, ZX

accordingly.

You can lock the handset dialling

buttons. Only incoming calls are

accepted while the key lock is ON.

Turn Key Lock ON

and hold

until a beep sounds.

‘Ó’ is displayed and all dialling

buttons are locked.

! When the key lock is ON,

emergency calls cannot be made

until key lock is cancelled.

Turn Key Lock OFF

and hold

until a beep sounds.

‘Ó’ disappears and key lock is

cancelled.

The key lock is also cancelled if the

handset is turned off.

Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333 9

Additional Features

Call Waiting is a service of your

Network provider and will only

operate if you have subscribed to this

service.

After subscription, your handset

displays a second caller’s phone

number while talking and a Call

Waiting tone is heard.

You can answer the second call,

keeping the first call on hold.

Please consult your

Network provider for

details of this service.

Dialling Pause

Recall Feature

M is used to access special

telephone services. Contact your

Network provider for details.

If your unit is connected to a PBX,

pressing

M allows you to access

some features of your host PBX such

as transferring an extension call

(Refer to ‘TBR’ in ‘Base Unit Settings’).

Call Waiting

Key Lock

650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 9

Handset Settings

You can change the handset settings using a handset near the base unit.

Before proceeding with any of the main menu items listed in this chap-

ter, the following procedure must initially be carried out:

From the Standby mode,

ZZVV

ZZSS

to select

sseettttiinngg hhss

(Setting Handset).

ZZVV

ZZSS

to select main menu items from below (see menus in shaded

text boxes):

To exit the menu at any time,

ZZ±±

ZZTT

to return to previous step during programming.

(Alarm Settings):*

ZZVV

ZZSS

(Set Time of Alarm):*

ZZVV

ZZKK

to enter time (4

digits) - 24 hour clock. Digits are

entered over the flashing digit.

To clear ZW.

ZZYY

to save.

ZZSS

to select

oonnccee

(Once),

rreeppeeaatt ddaaiillyy

(Repeat Daily) or

ooffff

(Off).

ZZVV

(Set Alarm):

ZZVV

ZZSS

to select

oonnccee

(Once),

rreeppeeaatt ddaaiillyy

(Repeat Daily) or

ooffff

(Off).

ZZVV

To Stop Alarm

When the alarm sounds,

ZZ‰‰

Alarm stops and display returns to

the standby mode. If once is

selected, the setting is turned off.

When in talk or intercom mode the

alarm will not sound until the call is

ended.

* For this feature to work you must

first set the Clock (see “Base Unit

Settings”).

Handset Settings

time alarm

set time

ringer opt

(Ringer Settings):

ZZVV

ZZSS

(Select the Handset Ringer

Volume):

ZZVV

ZZSS

to select Ringer Volume.

The choices are 6 levels or OFF.

ZZVV

(Select Ringer Pattern for

External Incoming call)*

To program see * below.

(Select Ringer Pattern for

Internal call)*

To program see * below.

(Select Ringer Pattern for

Paging/Handset Locator tone)*

To program see * below.

(Select Ringer Pattern for

Alarm tone):*

* There are 20 patterns available for

each ringer option.

ZZVV

ZZSS

to select ringer

pattern.

ZV.

ringer vol

ext ringer

int ringer

paging

alarm

set alarm

10 Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333

650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 10

Handset Settings

(Tone Settings):

ZV.

ZS or U.

(Set Key Confirmation

Tone ON/OFF)*

To program see * below.

(Set Call Waiting Tone

ON/OFF)*

To program see * below.

Call waiting tone sounds when an

incoming external call is received

during an intercom call.

(Set Range Alarm ON/OFF)

To program see * below.

Alarm will sound when you move out

of range of a base unit.

(Set Battery Low Tone

ON/OFF)*

* Program as follows

ZZVV

ZZSS

to select ON/OFF.

ZZVV

(Display Options):

ZZVV

ZZSS

(Select Standby Mode

Display):

ZZVV

ZZSS

to select from

bbss nnoo

(Base Unit number),

hhss nnoo

(Handset Number),

cclloocckk

(Clock)

ooffff

(Off).

ZZVV

! Time will only be displayed if

the clock has been set (see

“Base Unit Settings”).

(Select Talk Mode

Display):

ZZVV

ZZSS

to select from

ttaallkk

ttiimmee

(Length of Call) or

pphhoonnee

nnoo

(Phone Number).

ZZVV

(Call Options):

ZZVV

ZZSS

(Set Call Prohibition

ON/OFF):

This allows you to make emergency

and intercom calls only.

ZZVV

Enter handset PIN (4 digits).

If the PIN is incorrect an error tone

sounds.

ZZSS

to select

oonn

(On) or

ooffff

(Off).

ZV.

If on is selected, Ô is displayed.

(Enter a Direct Call

Number):

After a Direct Call phone number

has been entered and Direct Call set

to ON, you can call the Direct Call

number only, by pressing ‰.

Incoming calls are accepted.

ZZVV

Enter phone number.

ZZYY

ZZVV

to save the entered number.

ZZSS

to select

oonn

(On) or

ooffff

(Off).

ZV.

If on is selected,

ËË

is displayed.

Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333 11

tone opt

key tone

call waiting

range alarm

battery low

display opt

standby mode

talk mode

call opt

call bar

direct no

Before programming, please follow steps 1 to 4 of ‘Handset Settings’.

650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 11

(Registration):*

ZZVV

ZZSS

(Registering a Handset to

a Base Unit)*

(Cancelling a Base Unit)*

(Select Base Unit)*

For information on registering

handset(s), cancelling and selecting

base unit(s), please refer to ‘For

Optional Multi-Unit Users’.

(Reset the Handset

Settings):

You can reset all of the handset

settings to their initial factory set-

tings (see ‘Handset Initial Settings’).

ZZVV

Enter handset PIN (4 digits).

If PIN is correct, no is displayed.

ZZSS

to select

yyeess

(Yes).

ZV.

cleared is displayed and display

returns to settings menu.

(Set Direct Call ON/OFF):

ZZVV

ZZSS

to select

oonn

(On) or

ooffff

(Off).

ZZVV

If ON is selected, Ë is displayed.

(Other Options):

ZZVV

ZZSS

(Change Handset PIN):

You can change the 4 digit password

for the handset. The factory preset is

0000.

ZZVV

Enter current handset PIN (4

digits).

Enter new PIN (4 digits). (The

new PIN does not display).

Re-enter the new PIN. (If the PIN

is entered incorrectly, an error tone

sounds and display returns to

new pin ____.

! Once you have programmed the

password, you cannot confirm it.

We recommend you write down the

password. If you forget it, please

consult our Panasonic Customer

Care Helpline.



U.K. 08700 100 076

R.O.I. 01289 8333

(Set Auto Talk ON/OFF):

If you set Auto Talk to ON, you can

answer the phone by lifting the

handset off the base unit.

ZV.

ZZSS

to select

oonn

(On) or

ooffff

(Off).

ZV.

12 Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333

Handset Settings

set direct

other opt

hspin change

registration

cancel base

select bs

auto talk

(Set Battery Type Ni-MH /

Ni-Cd):

Select the type of battery installed. If

the battery type selected is not the

same as the type of battery installed,

the battery level icons will not be cor-

rect.

ZZVV

ZZSS

to select

nnii--mmhh

(Ni-MH)

nnii--ccdd

(Ni-Cd).

ZZVV

battery type

Before programming, please follow steps 1 to 4 of ‘Handset Settings’.

reset hs

650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 12

Base Unit Settings

The factory setting is time break

recall (TBR). If your PBX requires

earth recall mode, this can be added

at an extra cost. Please contact our

Customer Care Helpline for details.

ZZCC

Enter PIN.

ZZBB

then

for earth mode

ZZBB

then

for time break

recall mode (TBR).

ZZVV

Base Unit Settings

You can change the base unit settings using a handset near the base unit.

Before proceeding with any of the base settings listed in this chapter, the

following procedure must initially be carried out:

From the standby mode,

ZZVV

ZZSS

to select

sseettttiinngg bbss

(Setting Base).

ZZVV

iinnppuutt ccooddee

is displayed. From this display, follow the instructions after

each heading.

Please note: Where ‘Enter PIN’ is stated in this chapter, it refers to the 4 digit

Base Unit PIN. (The factory setting is 0000).

To exit the menu at any time,

ZZ±±

Ringer Mode

To select all handsets to

ring

ZZAA

Enter PIN.

ZZAA

ZZVV

To select specific

handset(s) to ring

ZZAA

Enter PIN.

ZZBB

ZZAA

to select

handset(s).

The selected handsets will be

flashing.

ZZVV

To select specific handset(s)

then all handsets to ring

The specific handset(s) will ring for a

selected number of rings. If not answered,

all handsets will ring.

ZZAA

Enter PIN.

ZZCC

ZZAA

to select handset(s)

to ring.

ZZVV

ZZAA

to select number of

rings.

ZZVV

Select Base Unit

Ringer Volume

ZZBB

twice.

ZZKK

(Off) or

select volume.

ZZVV

Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333 13

Selecting Time Break

Recall (TBR) / Earth

Recall Mode (option)

650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 13

If entered incorrectly, an error tone

sounds.

If entered correctly, a confirmation

tone sounds.

! Once you have programmed

the password, you cannot con-

firm it. We recommend you

write down the password. If

you forget it, please consult our

Panasonic Customer Care

Helpline.



U.K. 08700 100 076

R.O.I. 01289 8333

14 Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333

Base Unit Settings

Set the 4 - Digit Base

Unit PIN

Select Pause Timing

You can restrict selected handset(s)

from dialling selected phone

numbers. You can assign up to 6 call

restriction numbers (up to 8 digits).

ZZFF

Enter PIN.

All registered handset numbers are

displayed.

ZZAA -- FF

to select

handset(s) to restrict.

The selected handset(s) will flash.

ZZVV

Enter a restriction number (max.

8 digits).

(If you misdial ZW).

ZZYY

to confirm restriction

number.

To continue entering call restriction

numbers (max. 8 digits), enter the

number, then

ZZYY

On completion,

ZZYY

! If you dial a restricted

number, the call does not

connect and restricted number

flashes.

Cancel Call Restricted

Handset(s)

ZZFF

Enter PIN.

ZZAA

to select

handset(s) to cancel.

The selected handset(s) will stop

flashing.

ZZVV

Set Call Restriction

You can set the pause timing to 3 or

5 seconds, depending on your PBX

requirements (see “Dialling Pause”).

ZZCC

Enter PIN.

ZZCC

ZZAA

to select 3 seconds

ZZBB

to select 5 seconds.

ZZVV

You can change the 4-digit password

for the base unit. The factory preset

is 0000.

ZZEE

Enter PIN.

Enter New PIN (4 digits) twice.

Before programming, please follow steps 1 to 3 of ‘Base Unit Settings’.

650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 14

A basic guide to operations & features.

Pull out centre pages for quick reference

Quick G

uide &

Useful Information

Batteries

Network Dependent Features

Insert the Batteries

Charge the batteries for

approx. 15 hours before

initial use.

Batteries reach peak

performance after several full

charge/discharge cycles.

For further information on

batteries, please refer to main

Operating Instructions.

Important!

Some features described in these Operating Instructions/Quick Guide are

dependent upon subscription to your Network provider (eg. Caller ID,

Call Waiting).

All features of this type will be marked throughout the

Operating Instructions/Quick Guide with this icon.

If you experience any problems with your product, please contact our

Customer Care Helpline (

Monday - Friday 9:00am -

5:30pm)

on:

U.K.

08700 100076/R.O.I. 01289 8333

Order accessory items for all Communications Products with

ease and confidence either by telephoning our Customer Care

Helpline or by going online through our Internet Accessory

ordering service :

www.panasonic.co.uk

Most major credit and debit cards are accepted.

All enquiries, transactions and distribution facilities are provided

directly by Panasonic UK Ltd.

It couldn’t be simpler!

Contact Information

Please ensure the batteries are

inserted as shown.

Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333 a

650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page a

b Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333

Location of Controls

Icon Displays Flashes



Within range of a base unit

Intercom mode

Making or answering calls

Less than 30% battery capacity

30% to 50% battery capacity

50% to 100% battery capacity

In Direct Call mode

In Call Prohibition mode

In setting mode

Ringer tone temporarily OFF

Key Lock ON

Speed Dial list/mode

Out of range

Paging or another unit pages the

handset

Outside call is received

Û - Recharge battery

Ò - Fully charged

Handset controls

# - Receiver

$ - Function/OK Button

% - Talk Off/Power Button

& - Cancel Button

' - Intercom Button

( - Charge Contact

) - Display

* - Speed Dial Button

+ - Talk Button

, - Navigator Key

- - Redial/Pause Button

. - Recall Button

/ - Charge Contact

0 - Microphone

Base unit controls

- Page button

(

)

Handset Display

650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page b

Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333 c

Switch handset on / off Z± until a confirmation tone sounds.

Answer a call Z‰.

Make a call Dial the number and Z‰.

Turn Key Lock on/off ZY and hold for more than 2 seconds.

Hang up Z±.

Redial last number Z‰, ZX.

Store a number ZY. ZV enter number, ZY.

Dial a stored number ZÁ. ZS/U to select a number, Z‰.

Dial from the Redial List ZX. ZS/U to select a number, Z‰.

Adjust Receiver volume ZS/U during a call.

Call another handset ZN then the handset number.

Transfer a call ZN enter the handset number, Z±.

Three way call ZN enter the handset number, ZC.

Dial from the Caller ID List ZS/U to select a number, Z‰.

Function Action

Quick Guide

Á Speed Dial Reference Table

650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page c

d Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333

YYoouurr GGuuiiddee ttoo tthhee DDiissppllaayy

Note: The LCD display of the handset can display up to 7 segments and each

character will be displayed as shown in the following table. Some characters will

be displayed in a different way; for example, the character M is displayed n.This

is not a defect of the handset display, it is simply the representation of the

characters used in this kind of display. The LCD descriptions listed below are

displays that do not show the correct letter form or are abbreviated descriptions.

The meanings of these displays have been added for your reference.

ni-cd

ni-nh

no item

other opt

phone no

range alarm

ringer opt

ringer vol

reset hs

select bs

set alarm

set time

setting bs

setting hs

standby mode

talk mode

talk time

time alarm

tone opt

vol

Ni-Cd

Ni-MH

No Item

Other Option

Phone Number

Range Alarm

Handset

Ringer Option

Ringer Volume

Reset Handset

Select Base

Set Alarm

Set Time

Setting Base

Setting Handset

Standby Mode

Talk Mode

Talk Time

Time Alarm

Tone Option

Volume

Display

Message

Display

Meaning

alarm

auto

auto talk

battery low

battery type

bs no

bs pin

call opt

call waiting

clock

direct no

display opt

edit call no

ext ringer

hs no

hs pin

hs pin change

hot key reg

int ringer

key tone

memory full

new speed

new pin

Alarm

Automatic

Automatic Talk

Battery Low

Battery Type

Base Number

Base Unit Pin

Call Option

Call Waiting

Clock

Direct Number

Display Option

Edit a Call no.

External Ringer

Handset Number

Handset PIN

Change Handset

Internal Ringer

Key Tone

Memory Full

New Speed

New PIN

Display

Message

Display

Meaning

650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page d

Base Unit Settings

Cancel Call Restricted

Numbers

ZZFF

Enter PIN.

ZZVV

ZZWW

to cancel number.

ZZYY

Set the Clock

ZZJJ

Enter a new time (4 digits) (24

hour time) (

ZZKK

ZZYY

! After a mains power failure the

clock needs to be reset.

Reset the Base Unit

You can reset all of the base unit

settings to their initial factory

settings. (see “Base Unit Initial

Settings”).

ZZKK

Enter PIN.

ZZYY

Before programming, please follow steps 1 to 3 of ‘Base Unit Settings’.

! If the base unit is reset, the

Caller ID list will clear.

Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333 15

650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 15

16 Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333

Initial Settings

Base Unit Initial Settings

Handset Initial Settings

Function Initial Setting

Time Alarm Mode

Alarm Time

Handset Ringer Volume

Handset External Ringer Pattern

Handset Internal Ringer Pattern

Handset Paging Tone Pattern

Handset Alarm Tone Pattern

Key Tone

Call Waiting Tone

Range Warning Alarm

Battery Low Alarm

Standby Mode Display

Talk Mode Display

Call Prohibition Mode

Direct Call Mode

Direct Call Number

4 Digit Handset PIN

Auto Talk

Base Unit Access

Handset Receiver Volume

Redial Memory

OFF

Clear

OFF

Base Unit Number

Length of the Call

OFF

Clear

0000

OFF

Automatic Base Unit Access

All Clear

Function Initial Setting

Ringer Mode

Number of Rings

Earth/Time Break Recall

Pause Timing

Call Restricted Handset(s)

Call Restriction Number(s)

Base Unit PIN

Base Unit Ringer Volume

All Handsets

Time Break Recall

3 seconds

All Clear

0000

Medium

To reset handset to initial settings refer to “Handset Settings”.

To reset base unit to initial settings refer to “Base Unit Settings”.

650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 16

La pagina sta caricando ...

Panasonic Cordless Telephone KX-TCD650E Manuale utente

Marca: Panasonic

Modello: Cordless Telephone KX-TCD650E

Categoria: Telefoni

Tipo: Manuale utente

Questo manuale è adatto anche per

Scarica il pdf

rapporto

in altre lingue

English: Panasonic Cordless Telephone KX-TCD650E User manual

Documenti correlati

Altri documenti

BT BT4000 Big Button Manuale del proprietario