Advantech Switch ADAM-4571 Manuale utente

ADAM-4570/ADAM-4571/EDG-4504

1/2/4 Port Ethernet to

RS-232/422/485 Data Gateway

User’s Manual

Copyright Notice

This document is copyrighted, 2001, by Advantech Co., Ltd. All rights

are reserved. Advantech Co., Ltd., reserves the right to make improve-

ments to the products described in this manual at any time without

notice.

No part of this manual may be reproduced, copied, translated or

transmitted in any form or by any means without the prior written

permission of Advantech Co., Ltd. Information provided in this manual

is intended to be accurate and reliable. However, Advantech Co., Ltd.

assumes no responsibility for its use, nor for any infringements upon

the rights of third parties which may result from its use.

CE Notification

The ADAM-4570/ADAM-4571/EDG-4504 has passed the CE test for

environmental specifications. Test conditions for passing included the

equipment being operated within an industrial enclosure. In order to

protect the ADAM-4570/ADAM-4571/EDG-4504 system from being

damaged by ESD (Electrostatic Discharge) and EMI leakage, we

strongly recommend the use of CE-compliant industrial enclosure

products.

3nd Edition

Printed Taiwan January 2002

Advantech Customer Services

Each and every Advantech product is built to the most exacting

specifications to ensure reliable performance in the unusual and

demanding conditions typical of industrial environments. Whether

your new Advantech equipment is destined for the laboratory or the

factory floor, you can be assured that your product will provide the

reliability and ease of operation for which the name Advantech has

come to be known.

Your satisfaction is our number one concern. Here is a guide to

Advantech’s customer services. To ensure you get the full benefit of

our services, please follow the instructions below carefully.

Technical Support

We want you to get the maximum performance from your products. So

if you run into technical difficulties, we are here to help. For most

frequently asked questions you can easily find answers in your

product documentation. These answers are normally a lot more

detailed than the ones we can give over the phone.

Please consult this manual first. If you still cannot find the answer,

gather all the information or questions that apply to your problem and,

with the product close at hand, call your dealer. Our dealers are well

trained and ready to give you the support you need to get the most

from your Advantech products. In fact, most problems reported are

minor and are able to be easily solved over the phone.

In addition, free technical support is available from Advantech

engineers every business day. We are always ready to give advice on

application requirements or specific information on the installation and

operation of any of our products.

Product Warranty

Advantech warrants to you, the original purchaser, that each of its

products will be free from defects in materials and workmanship for

two years from the date of purchase.

This warranty does not apply to any products which have been

repaired or altered by other than repair personnel authorized by

Advantech, or which have been subject to misuse, abuse, accident or

improper installation. Advantech assumes no liability as a conse-

quence of such events under the terms of this Warranty.

Because of Advantech’s high quality-control standards and rigorous

testing, most of our customers never need to use our repair service. If

an Advantech product ever does prove defective, it will be repaired or

replaced at no charge during the warranty period. For out-of-warranty

repairs, you will be billed according to the cost of replacement materi-

als, service time and freight. Please consult your dealer for more

details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered (e.g. type

of PC, CPU speed, Advantech products used, other hardware and

software used etc.). Note anything abnormal and list any on-screen

messages you get when the problem occurs.

2. Call your dealer and describe the problem. Please have your manual,

product, and any helpful information readily available.

3. If your product is diagnosed as defective, you have to request an

RMA number. When requesting an RMA (Return Material Authori-

zation) number, please access ADVANTECH’s RMA website: http://

www.advantech.com.tw/rma. If the web sever is shut down, please

contact our office directly. You should fill in the “Problem Repair

Form”,describing in detail the application environment, configura-

tion, and problems encountered. Note that error descriptions such as

“does not work” and “failure” are so general that we are then

required to apply our internal standard repair process.

4. Carefully pack the defective product, a completely filled-out Repair

and Replacement Order Card and a photocopy of dated proof of

purchase (such as your sales receipt) in a shippable container. A

product returned without dated proof of purchase is not eligible for

warranty service.

5. Write the RMA number visibly on the outside of the package and

ship it prepaid to your dealer.

Contents

Chapter 1: Overview ........................................ 1

1.1 Introduction ..................................................................... 2

1.2 Features .......................................................................... 5

1.3 Specifications ................................................................. 6

1.4 Package Checklist .......................................................... 7

Chapter 2: Getting Started .............................. 9

2.1 Understanding the ADAM-4570/ADAM-4571/EDG-4504 . 11

2.1.1 Network Architecture ..................................................... 11

2.1.2 Top / Front / Rear View .................................................. 13

2.1.2.1 ADAM-4570 .............................................................. 13

2.1.2.2 ADAM-4571 .............................................................. 15

2.1.2.3 EDG-4504 ................................................................ 17

2.1.3 Stickers ......................................................................... 19

2.2 Connecting the Hardware ........................................... 20

2.2.1 Choosing a Location ...................................................... 20

2.2.1.1 ADAM-4570/4571 ..................................................... 20

2.2.1.2 EDG-4504 ................................................................ 24

2.2.2 Network Connection ....................................................... 25

2.2.3 Power Connection .......................................................... 26

2.2.4 Serial Connection ........................................................... 27

2.2.4.1 ADAM-4570/4571 ..................................................... 27

2.2.4.2 EDG-4504 ................................................................ 29

Chapter 3: Installation and Configuration .. 31

3.1 Driver and Utility Installation ....................................... 32

3.2 Configuring the ADAM-4570/ADAM-4571/EDG-4504 

The Configuration Utility ............................................. 33

3.2.1 Search for Specific ADAM-4570/ADAM-4571/EDG-4504 34

3.2.2 System Configuration ..................................................... 36

3.2.3 Network Configuration .................................................... 38

3.2.4 Port Configuration .......................................................... 39

3.2.4.1 Host/Device Idle Protection (ADAM-4570 only) ........ 41

3.2.5 Security Configuration .................................................... 47

3.3 Status Messages .......................................................... 48

3.3.1 Connection Diagnostic ................................................... 48

3.4 Port Mapping Utility ...................................................... 50

3.4.1 Self Test Function .......................................................... 52

3.4.2 Upgrading ADAM-4570/ADAM-4571/EDG-4504s

Firmware Download ........................................................ 54

3.4.3 Save The Configuration ................................................... 57

3.4.4 Auto-reconnect function ................................................. 58

Chapter 4: Troubleshooting ......................... 57

Figures

Figure 2-1 Installation Flow Chart ............................................................. 10

Figure 2-2 Network Architecture(1) ......................................................... 12

Figure 2-3 Network Architecture(2) ......................................................... 12

Figure 2-4 ADAM-4570Top Panel .......................................................... 14

Figure 2-5 ADAM-4570Front Panel........................................................ 14

Figure 2-6 ADAM-4570Back Panel........................................................ 14

Figure 2-7 ADAM-4571Top Panel .......................................................... 16

Figure 2-8 ADAM-4571Front Panel........................................................ 16

Figure 2-9 ADAM-4571Back Panel........................................................ 16

Figure 2-12 EDG-4504Front Panel ........................................................... 18

Figure 2-10 EDG-4504Top Panel .............................................................. 18

Figure 2-11 EDG-4504Front Panel ........................................................... 18

Figure 2-13 Panel Mounting ........................................................................ 21

Figure 2-14 Din Rail Mounting ..................................................................... 22

Figure2-15 Piggyback Stack ...................................................................... 23

Figure 2-17 Panel Mounting ........................................................................ 24

Figure 2-16 Din Rail Mounting ..................................................................... 24

Figure 2-18 Connecting ADAM-4570/ADAM-4571/EDG-4504 series to the

hub ............................................................................................ 25

Figure 2-20 Power Connection for EDG-4504 ............................................ 26

Figure 2-19 Power Connection for ADAM-4570/4571 ............................... 26

Figure 2-21 Serial Connection for ADAM-4570/4571 ................................ 27

Figure 2-22 Serial Connection for EDG-4504 ............................................. 29

Figure 3-1 Configuration Utility ................................................................. 33

Figure 3-2 Locate all ADAM-4570/ADAM-4571/EDG-4504 ....................... 34

Figure 3-4 Locate specific ADAM-4570s ................................................. 35

Figure 3-3 Locate the desired group of ADAM-4570s ............................. 35

Figure 3-5 System Setting Window .......................................................... 36

Figure 3-6 Network Configuration Window ............................................. 38

Figure 3-7 Port Configuration Window..................................................... 39

Figure 3-8 ArchitectureHost idle switch mode .................................... 42

Figure 3-9 Security configuration ............................................................. 47

Figure 3-10 Status messages .................................................................... 48

Figure 3-11 Unused ports ........................................................................... 50

Figure 3-12 Assign COM port to ADAM-4570/ADAM-4571/EDG-4504 ....... 51

Figure 3-13 Warning window ...................................................................... 51

Figure 3-14 Test window ............................................................................. 53

Figure 3-15 Loopback test .......................................................................... 54

Figure 3-16 Update firmware window ........................................................ 55

Figure 3-17 Select the file ........................................................................... 55

Figure 3-18 Download firmware ................................................................. 56

Tables

Table 2-1 ADAM-4570 LED Definition ...................................................... 13

Table 2-2 ADAM-4571 LED Definition ...................................................... 15

Table 2-3 EDG-4504 LED Definition ......................................................... 17

1

Chapter

Overview

1.1 Introduction

The ADAM-4570/ADAM-4571/EDG-4504 is a light-

ning fast and cost effective data gateway between RS-

232/422/485 and Ethernet interfaces. This unit imme-

diately upgrades your existing device(s) to the Ethernet

world. Functionally transparent and efficient, the

ADAM-4570/ADAM-4571/EDG-4504 is specially

designed for remotely controlling and monitoring de-

vices via the Internet.

The ADAM-4570/ADAM-4571/EDG-4504 provides

one, two or four RS-232/485/422 serial ports that can

each be easily configured for your needs. For increas-

ing the reliability of systems, the ADAM-4570 also pro-

vides three significant functions: Host idle, Device idle

and Auto-reconnect. The ADAM-4570/ADAM-4571/

EDG-4504 also supports transmission speeds up to 230

Kbps, meeting the demand for today’s high-speed ex-

change. Users can use a Windows utility to configure

the ADAM-4570/ADAM-4571/EDG-4504 without

need for further programming. The ADAM-4570/

ADAM-4571/EDG-4504 not only protects your cur-

rent hardware investment but also ensures future net-

work expandability. Since the protocol conversion is

transparent, all existing devices can be seamlessly inte-

grated into the Ethernet network. Therefore, the

ADAM-4570/ADAM-4571/EDG-4504 can be used

in security systems, factory automation, SCADA, trans-

portation and more.

The ADAM-4570/ADAM-4571/EDG-4504 inte-

grates both your existing human-machine interface soft-

ware (HMI) and RS-232/422/485 system architecture

with an Ethernet network. The result helps save cabling

space and software development cost. The ADAM-

4570/ADAM-4571/EDG-4504 also provides a high-

performance RISC CPU and real time operating sys-

tem to reduce CPU load. These components make the

ADAM-4570/ADAM-4571/EDG-4504 more stable

and reliable. Another benefit is the ADAM-4570/

ADAM-4571/EDG-4504 allows users to remotely

download programs to a designated device via Ethernet.

This reduces the need for on-site maintenance and di-

agnosis. In addition, the ADAM-4570/ADAM-4571/

EDG-4504 comes with a Windows configuration and

port-mapping utility. This configuration tool can auto-

detect all Ethernet Data Gateway products on a local

network. It also lets users easily adjust all settings. The

port mapping utility helps to set up COM ports for one

Windows 95/98/NT/2000/XP platform. This helps us-

ers manage all ports to meet their needs.

Host/Device Idle Protection empowers the reliabil-

ity of system (ADAM-4570)

For improving the stability of systems, users usually have

to spend lots of effort to build up “Redundant” func-

tionality. Now, the ADAM-4570 provides new pow-

erful functions that help users build up redundant sys-

tems fast and easily: The new functions are Host idle &

Device idle.

The purpose of the “Host idle switch” function is to

prevent system hang-up from occurring due to applica-

tion program failure. If the application program fails,

the ADAM-4570 will cut off the connection between

the host PC and the ADAM-4570. Another PC can

then start to access the same ADAM-4570. Also, if

4 ADAM-4570/ADAM-4571/EDG-4504 User’s Manual

the serial device or communication between the device and the

ADAM-4570 fails, the “Device Idle” function will switch the

communication port from one port to another port to keep com-

municating with another device automatically. Thus, another de-

vice can send data to the ADAM-4570.

Auto-reconnect after networking breaks

Sometimes, the system crashes because the ADAM-4570/

ADAM-4571/EDG-4504 is interrupted or powered-off by ac-

cident. The ADAM-4570/ADAM-4571/EDG-4504 provides

an “Auto-reconnect” function to solve this problem. When the

ADAM-4570/ADAM-4571/EDG-4504 is powered-off acci-

dentally, the driver will keep trying to reconnect the ADAM-

4570/ADAM-4571/EDG-4504 automatically. When the

ADAM-4570/ADAM-4571/EDG-4504 recovers or is pow-

ered-on, due to this auto-reconnect function, the host PC can

send commands to the ADAM-4570/ADAM-4571/EDG-4504

again. This function enhances the reliability of the system.

Auto-detect Ethernet Data Gateway products

The configuration utility can search all the Ethernet Data Gate-

way devices on the network automatically and configure them

according to the current network status, saving your effort to

acquire the status information yourself.

Easy to diagnose the communication situation

If this test item is selected, an internal test will be done on the

RS-232 serial port, and the result (successful or failed) will be

displayed when the test is completed. If this test item is selected,

an external test will also be done to check that the connection

signals for each port are working properly. For the external test,

you will need to connect each port to a loopback tester. The test

Chapter 1 Introduction 5

is divided into two parts: Signal test and Communication Param-

eters test. If the results are OK, users can be sure the communi-

cation quality between host PC and ADAM-4570/ 4571 is OK.

Easy to maintain by downloading firmware remotely

Advantech continually upgrades ADAM-4570/ADAM-4571/

EDG-4504’s firmware to keep pace with the ever-expanding

world of computing. You can use the Download function located

on the Port Mapping utility to carry out the upgrade procedure.

Please access Advantech’s Web site to download the required

computer file and then follow the instructions.

1.2 Features

• Supports 10/100 Mbps Base-T standard

• Provides a communication redundant function to enhance the

reliability of system.

• Supports high transmission speeds up to 230 Kbps

• Supports an advanced security mechanism to avoid unautho-

rized access

• Auto-reconnect or return error when Network breaks

• Remote download firmware: Easy to maintain

• Auto-detecting Configuration Utility

• Easy managing Port Mapping Utility

• Supports Windows 95/98/NT/2000/XP driver

• Surge protection for RS-485 line and power supply

• Automatic RS-485 data flow control

6 ADAM-4570/ADAM-4571/EDG-4504 User’s Manual

1.3 Specifications

• Protocol: TCP/IP

• Network Port: IEEE 802.3, IEEE 802.3u

• Interface:

Network: 10/100 BASE-T standard

Serial: RS-232, RS-422, RS-485

• Port: 1/2/4 independent RS-232/422/485 ports

• Connector:

Network: RJ-45

Serial: RJ-48 (RJ-48 to DB-9 cable provided)

• Transmission speed: 300 bps to 230 Kbps

• Parity bit: odd, even, none, space, mark

• Data bit: 5, 6, 7, 8

• Stop bit: 1, 1.5, 2

• Signals: Full Modem control signals (Doesn’t support RAS

service)

• Diagnostic LEDs:

Network: TX/RX, Link, Speed (10/100 Mbps ), Power

Serial: TX/RX, Status

• Utility Software:

Auto-detecting configuration utility

Easy-to-manage port mapping utility

• Driver Supported:

Windows 95/98/ME/NT/2000/XP

• Power Requirements: unregulated 10 to 30 Vdc with surge

protection

Chapter 1 Introduction 7

• Power Consumption:

3.5 Watt (ADAM-4571)

4 Watt (ADAM-4570)

4.5 Watt (EDG-4504)

• Placement:

DIN-rail, panel mounting, piggyback stack

(ADAM-4570/4571)

DIN-rail, panel mounting (EDG-4504)

• Operating Temperature: 0 ~ 60° C

• Storage Temperature: -20 ~ 80° C

• Operating Humidity: 20 ~ 95% (non-condensing)

• Storage Humidity: 0 ~ 95% (non-condensing)

1.4 Package Checklist

• ADAM-4570 or ADAM-4571 or EDG-4504

• CD-ROM for utility & manual

• 1/2/4 RJ-48 to DB-9 serial cables

• One loopback DB-9 tester

• Five stickers

• NYLON DIN-rail Mounting Adapter

• SECC Panel Mounting Bracket

8 ADAM-4570/ADAM-4571/EDG-4504 User’s Manual

2

Getting Started

Chapter

10 ADAM-4570/ADAM-4571/EDG-4504 User’s Manual

In this chapter, you will be given an overview of the

ADAM-4570/ADAM-4571/EDG-4504 hardware installation

procedures. As mentioned in the previous chapter, the

ADAM-4570/ADAM-4571/EDG-4504 comes ready for all

network connections, including Ethernet, and RS-232/422/485

port connections.

We begin this chapter with a brief showing the installation

procedure. You can take flow chart for reference.

Figure2-1 Installation Flow Chart

La pagina sta caricando ...

Advantech Switch ADAM-4571 Manuale utente

Questo manuale è adatto anche per

Advantech Switch ADAM-4571 Manuale utente

in altre lingue

Documenti correlati

Altri documenti