Philips 32PF7411/10 Manuale utente

Country Number Tariff

Austria 0820 901114 €0.20/min

Belgium 070 222 303 €0.17/min

Chech Rep 800142840 free

Denmark 3525 8759 local

Finland 09 2311 3415 local

France 08 9165 0005 €0.23/min

Germany 0180 5 356 767 €0.12/min

Greece 0 0800 3122 1280 free

Hungary 0680018189 free

Ireland 01 601 1777 local

Italy 199 404 041 €0.25/min

Luxemburg 40 6661 5644 local

Netherlands 0900 8407 €0.20/min

Norway 2270 8111 local

Poland 0223491504 local

Portugal 2 1359 1442 local

Slovakia 0800004537 free

Spain 902 888 784 €0.15/min

Sweden 08 5792 9100 local

Switzerland 0844 800 544 local

UK 0906 1010 016 £0.15/min

www.philips.com/support

Model

Serial

1

Thank you for purchasing this television set.

This handbook has been designed to help you install and operate your TV set.

We strongly recommend that you read it thoroughly.

Introduction

Table of Contents

Recycling

The packaging of this product is intended to be recycled. Apply to the local authorities

for correct disposal.

Disposal of your old product

Your product is designed and manufactured with highly quality material and components,

which can be recycled and reused. When this crossed-out wheeled bin symbol is attached

to a product, it means the product is covered by the European Directive 2002/976/EC.

Please inform yourself about the local seperate collection system for electrical and

electronic products.

Please act according to your local rules and do not dispose of your old products with your

normal household waste. The correct disposal of your product will help prevent potential

negative consequences for the environment and human health.

GB

2

X

10 cm

X

Safety Information

Avoid placing your TV set under direct sunlight

or heat.

To prevent fire or shock hazard, do not expose

your TV to rain or moisture.

Take care not to connect too many equipment

to the same mains socket as it may cause

overloading resulting in fire or electric shock.

Pull the power lead by the plug. Do not pull on

the power lead. Do not use a poor fitting mains

socket. Insert the plug fully into the mains. If it is

loose, it may cause arching and result in fire.

No naked flame sources (lighted candles) should

be placed on the top of the set or near it.

When cleaning the surface or the screen of the

set, wipe gently with absorbent cotton or cloth

or other soft material like chamois. Do not use

too wet a cloth which is dripping with water.

Do not use acetone, toulene or alcohol to

clean the TV. As a safety precaution, unplug the

power cord from the mains.

As a safety precaution, do not touch any part of

the TV, power lead or aerial lead during lightning

storms.

Installation of the TV set on the wall should be

carried out by qualified serviceman. Improper

and incorrect installation may render the set

unsafe.

Avoid placing vase filled with water on the TV.

Water spilled into the set could result in electric

shock. Do not operate set if water is spilled into

it. Have it checked immediately by a qualified

serviceman.

Leave at least 10 cm around each side of the

TV set to allow for proper ventilation. Place

the set on a stable, level surface. Never cover

the ventilation slots of the TV with a cloth or

other material. It may cause overheating. Do not

insert anything in the ventilation holes. If metal

or something flammable is inserted in these

holes, it may result in fire or electric shock.

3

2

3

Switching on the TV set

• To switch on the TV set, press the POWER

button. A green indicator comes on and the

screen lights up.

• If the TV set remains in standby mode (red

indicator), press the PROGRAM – /

+ key on

the keyboard or the P – / + key on the

remote control.

1

Preparation / Getting started

Connections

• Insert the aerial plug into the 75Ω :

socket at the bottom of the set.

• Insert the mains plug into a wall socket

(220-240V / 50/60Hz).

• Ensure the power cord is fully inserted in

the TV mains socket and the wall socket.

Warning!

If the TV is mounted on a swivel base or

swivel arm, ensure no strain is placed on

the power cord when the TV is swivelled.

Strain on the power cord can loosen

connections. This may cause arching and

result in fire.

Using the Remote Control

Pull out the plastic insulation sheet from the

battery to enable the remote control to operate.

NOTE

For more details on other connections,

see “CONNECTION GUIDE”.

26

”

32

”

3

7

”/42”/50”

26

”

–

PROGRAM +

MENU

–

VOLUME +

POWER

32”

37”/42”/50”

4

Television keys and connectors

6

7

8

9

10

EXT 4

EXT 2 /SVHS2

EXT 1

DVI

(AUDIO IN)

HDMI 2

HDMI 1

AUDIO

R L

IN

Pr

Pb Y

L

R

5

AC in ~

Headphone

Audio In

Video In

S-Video

AUDIO

IN

R

L

VIDEO

IN

S-VIDEO

11

EXT3/SVHS3

3

–

PROGRAM +

MENU

– VOLUME +

POWER

4

2

1

32”

1

2

3

4

11

LCD

TV

5

6

7

8

9

10

EXT 4

EXT 2 /SVHS2

EXT 1

DVI

(AUDIO IN)

HDMI 2

HDMI 1

AUDIO

R L

IN

Pr

Pb Y

L

R

MAINS ~

AC in ~

Plasma TV

CAUTION : This

a Class 1

apparatus.

It must be connected

to a MAINS socket

out with a protective

earthing connection.

EXT3/SVHS3

37”/42”/50”

5

Television keys and connectors

1

POWER

.

: to switch the TV on and off.

2

VOLUME –/+: to adjust sound level.

3

MENU : to access or close menus.

The PROGRAM /CHANNEL –/+ keys can

be used to select a menu item and the

VOLUME –/+ keys to enter into the selected

menu item and make adjustments.

4

PROGRAM / CHANNEL –/+ : to select

programmes.

5

POWER socket :

Insert the mains plug into

a wall socket.

6

DVI Audio Input : for connecting a HD

(high definition) equipment or computer with

DVI output.

7

Component Video inputs / Audio Inputs

(

EXT4)

: to connect to equipment like DVD,

Set-Top box which have the same sockets.

Connect the audio inputs of the TV to the

outputs of the device together with the

Component Video Inputs.

8

HDMI socket : to connect to set-top box,

DVD player/recorder, High Definition

equipment or Personal Computer.

9

EXT1 and EXT2/SVHS2 sockets : connect to

equipment

like DVD player/recorder, VCR,

Decorder which have scart connections.

Important : In order to connect your

decoder, please use EXT1 scart only.

10

TV Aerial socket :

Insert the aerial plug

into the 75 : socket.

11

Side connections

EXT3/SVHS3

: for

connecting to devices like camera or

camcorder. Also allows you to connect your

headphone for your personal listening

pleasure.

Note :

EXT3/SVHS3

is only available for

certain models.

NOTE

For more details on connections,

see CONNECTION GUIDE.

1

3

4

2

6

7

8

9

10

EXT 4

EXT 2 /SVHS2

EXT 1

DVI

(AUDIO IN)

HDMI 2

HDMI 1

AUDIO

R L

IN

Pr

Pb Y

L

R

5

AC in ~

Headphone

Audio In

Video In

S-Video

AUDIO

IN

R

L

VIDEO

IN

S-VIDEO

11

EXT3/SVHS3

26”

6

Remote Control keys

1

Standby

To set the TV to standby mode. To switch the

TV set on again, press

,

to

,

P – / + or AV key.

2

Pixel Plus

Offers a unique combination of ultimate

sharpness, increased depth impression, true

natural detail, brilliant and vivid colours. Press

the key for a Pixel + demonstration.

3

DVD / AUX (see page 7).

4

Surround Sound

To activate / deactivate the surround sound

effect. In stereo, this gives the impression that

the speakers are further apart. For models

equipped with Virtual Dolby Surround, you can

experience Dolby Surround Pro Logic sound

effects

.

5

Telextext keys (see page 15).

6

AV

To display Source List to select TV or peripheral

equipment connected to EXT 1, EXT 2/SVHS2,

EXT 3/SVHS3, EXT 4, HDMI 1 or HDMI 2.

Note :

EXT3/SVHS3

is only available for

certain models.

7

Active Control

(

S

ee page 14).

8

MENU

To call up or exit the TV menus.

9

Cursors

These 4 keys are used for selection and adjustment

of menu items.

10

OK

Conﬁrms selection.

11

Volume ( – VOL + )

To adjust the sound level.

12

Smart Picture /Sound

Used to access a series of predeﬁned picture

and sound settings (see page 14).

13

/

Numerical keys

For direct access to programmes. For a 2

digit programme number, the 2

nd

digit must

be entered before the dash disappears.

14

Screen information

To display/remove the programme number,

the sound mode, the remaining time of the

sleeptimer and the *signal strength indicator.

15

Mode

Select between TV, DVD and AUX mode (see

“Remote Control - Other functions” on page 7).

16

Programme List

To display / clear the list of programmes.

Use the

keys to select a programme and

the

key to display it.

17

Picture-in-Picture

To display a PIP window on the TV screen (see

page 12 on how to use the PIP feature).

18

Sound mode

Used to force programmes in Stereo

and Nicam Stereo to Mono or, for

bilingual programmes, to choose between

Dualå or Dual». The Mono indication is red

when in forced position.

19

Screen Format

(see page 13).

20

DVD / AUX (see page 7).

21

Mute

Press to mute or restore sound.

22

Selecting TV programmes (P – / +)

To select the next or previous programme.

The number and the sound mode

are displayed for a few seconds. For some

TV programmes, the title of the programme appears

at the bottom of the screen.

23

Previous/Present programme

To alternate between the last viewed and

present programme.

* The signal strength indicator shows

the signal strength of the transmission

of the programme you are watching.

11

AUX

1

2

3

5

6

7

8

9

4

10

12

13

14

15

16

17

18

19

20

21

22

23

7

Quick Installation

When you switch on the TV set for the

first time, a menu is displayed on screen.

This menu prompts you to select the

country and language for the menus.

Note

If the above menu is not displayed, proceed to do the

installation of channels by the Auto Store method

(see page 8). If above menu is displayed, proceed to

do the following steps.

& Use the keys on the remote control

to select your country. If your country does

not appear in the list, select “. . . “ . Refer to

the “Reference table of countries for selection”

on page 20.

é Use the key to move to the Language

mode and select your language by the

keys.

“ Use the key to start search.

Plug’n’Play

Country

GB

Language

English

The search starts automatically. All the available

TV programmes will be stored. This operation

takes a few minutes. The display shows the

progress of the search and the number of

programmes found.

Important : To exit or interrupt the search

before it is completed, press the key.

If you interrupt search during auto store, not

all channels will be stored. For all channels to

be stored, you need to do a complete auto

store search again.

Note

ATS (Automatic Tuning System) feature

If the transmitter or cable network sends the

automatic sort signal, the programmes will be

numbered correctly. In this case, the installation

is complete. If this is not the case, you need to

use the Sort menu to number the programmes

correctly.

ACI (Automatic Channel Installation)

feature

If a cable system or a TV channel which

broadcasts ACI is detected, a programme

list appears. Without ACI broadcast, the channels

are numbered according to your language and

country selection. You can

use the Sort menu to renumber them.

Some transmitters or cable networks broadcast their

own sort parameters (region, language, etc.). In this

case, indicate your choice using the keys and

confirm with key.

The remote control also allows you to control the main functions of some Philips DVD models

Press the

key to select the required mode: DVD or AUX.

The remote control indicator lights up to display the selected mode. It switches off automatically

after 20 seconds if left idle. The mode automatically returns to TV mode.

The following buttons are operational, depending on the equipment:

to

standby

fast rewind

stop

play

fast forward

record

pause

display and exit menu

programme selection

navigation and adjustments,

confirms selection

digit keys

Note : Functions not available to Philips DVD-R device.

Remote Control keys (Other functions)

8

Programme Sort

Press the

key. The TV Menu is

displayed on the screen.

Use the key, select the Install menu

and the /

key to enter the

Install menu.

Use the key to select Sort and the

/

key to enter sort mode.

Select the programme number you want to

move using the keys and the /

key to enter sorting mode (The arrow cursor

now points to the left).

Use the keys to select the new

programme number and confirm with the

/

key. (The arrow points to the

right and sorting is completed).

Repeat steps and for each

programme number you wish to re-number.

To return to previous menu, press the

key.

To exit the menu, press the

key.

1

4

5

4

3

5

6

2

7

TV Menu

Picture

Sound

Features

Install

Language

Country

Auto Store

Manual Store

Sort

Name

Auto Store

Press the

key.

Using the

key, select Install and the

/

key to enter the Install menu

(Language is highlighted).

Select your desired menu *Language with

the Í Æ keys.

Select Country with the

key and

use the

keys to select the country of

your choice.

Using the

key, select Auto Store and

the

/

key to start automatic

searching of the channels. All the available TV

programmes will be stored. This operation

takes a few minutes. The display shows the

progress of the search and the number of

programmes found.

After the search is completed, press the

key to exit menu.

Important : To exit or interrupt the search

before it is completed, press the

key.

If you interrupt search during auto store, not

all channels will be stored. For all channels to

be stored, you need to do a complete auto

store search again.

1

2

3

5

4

6

TV Menu

Picture

Sound

Features

Install

Language

Country

Auto Store

Manual Store

Sort

Name

Search

* Selecting the language

If you have selected the wrong language for one

reason or another and do not understand the

language to operate the set, do the following to

bring you back to your preferred language :

– press the

key to exit the existing

menu.

– press the

key to enter the TV menu.

– press the

key repeatedly until the

FOURTH item in the TV menu is

highlighted.

– press the

/ key to go into the Install

menu.

– press the

keys to select your preferred

language (the menu will now appear in the

chosen language). You can proceed to install

the TV channels.

8

9

Manual Store

Search :

Press the /

key. The search starts.

Once a programme is found, the scanning

stops and its name is displayed (if available).

Go to the next step. If you know the

frequency of the required programme, this

can be entered directly using the

to

keys.

Program No. :

Enter the required number with the

to

or keys.

Fine Tune :

If the reception is not satisfactory, adjust

using the keys.

Store :

To store the changes, press /

key .

The programme is now stored.

Repeat steps

6

to

9

for each programme

to be stored.

To return to previous menu, press the

key.

To exit the menu, press the

key.

System : Use the

keys to select

Europe (automatic detection*),

France (LL’ standard),

UK (I standard),

West Europe (BG standard) or

East Europe (DK standard).

* Except for France (LL’ standard), you must

select France.

1

3

4

2

5

6

7

8

9

10

11

This menu is used to store the programmes

one at a time.

Press the

key.

With the

key, select Install and the

/

key to enter the Install menu.

Use the

key to select Manual Store and

the

/

key to enter Manual Store

menu.

Use the

keys to select the items in the

Manual Store menu to adjust or activate.

TV Menu

Picture

Sound

Features

Install

Manual Store

System

Search

Program No.

Fine Tune

Store

Europe

Naming of Channel

You can give a name to the TV channel.

Press the

key.

With the

key, select Install and the

/

key to enter the Install menu.

1

3

4

2

Use the

key to select Name and

the

/

key to enter name mode.

Use the

keys to select the programme

you want to name and the

/

key to

enter naming mode.

Use the

keys to select the characters

and use the

keys to move around the

name display area (maximum of 5

characters).

Press

/

key until the name

appears at the top left hand corner of the

TV screen. The name is now stored.

7

To exit the menu, press the

key.

5

6

TV Menu

Picture

Sound

Features

Install

Language

Country

Auto Store

Manual Store

Sort

Name

8

12

10

Picture and Sound Settings

Press the

key.

Use the Î ï keys to select Picture or

Sound.

Use the Í Æ /

keys to enter

Picture or Sound menu.

Use the keys to select a Picture or

Sound setting and the keys to adjust.

Use the keys to select Store.

To store the changes, press key.

To return to previous menu, press the

key.

To exit the menu, press the

key.

1

2

3

4

5

TV Menu

Picture

Sound

Features

Install

Picture

Brightness

Colour

Contrast

Sharpness

Colour Temp.

Store

39

TV Menu

Picture

Sound

Features

Install

Sound

• 120 Hz

• 500 Hz

• 1500 Hz

• 5 KHz

• 10 KHz

Description of the Picture settings

Brightness : this changes picture brilliance.

Colour : this changes the intensity of the colour.

Contrast : this changes the difference between

the light and dark tones.

Sharpness : this increases or decreases the

sharpness level to improve details in the picture.

Colour Temp. : this changes the colour

rendering: Cool (bluer), Normal (balanced) or

Warm (redder).

Store : to store the picture adjustments and

settings.

Description of the Sound settings

Equalizer : to adjust the sound tone (from bass:

120 Hz to treble : 10 KHz).

Balance : this balances the sound level on the left

and right speakers.

Delta Volume : this is used to compensate

any volume differences between the different

programmes or EXT sockets. Note : Programmes

0 to 40 have individual volume setting and

programmes 41 and above share common setting.

AVL (Automatic Volume Leveller) : this is used

to limit sudden increases in sound, especially on

programme change or advertising slots.

Dolby Virtual : To activate / deactivate the

surround sound effect.

You can also access these settings with the

key.

Store : this is used to store the sound settings.

6

7

8

11

Using the Contrast+ and NR (Noise Reduction) features

Press the

key.

With the key, select Features and the

/

key to enter the Features menu.

Use the keys to select Contrast+ or

NR (Noise Reduction) and the keys

to select an On or Off option.

To return to previous menu, press the

key.

To exit the menu, press the

key.

Definition of the feature settings

Contrast+ :

– optimise the total contrast of the picture for

improved picture visibility.

– select On option to activate feature.

NR (Noise Reduction) :

– improves “noisy” picture (little dots on picture)

due to weak signal transmission.

– select On option to activate feature.

1

3

4

2

5

This menu lets you use the TV set as an alarm.

& Press the

key.

é With the

key, select Features and the

/

key to enter the Timer menu.

“ Use the

key to access the settings

and the

or

key to

select or adjust setting.

Sleep: to select an automatic standby period.

Time: enter the current time. Note: the time

is updated automatically each time the TV set

is switched on via the teletext information on

programme 1. If this programme does not have

teletext, the update will not take place.

Start Time: enter the start time.

Stop Time: enter the standby time.

Program No.: enter the number of the

programme for the wake-up alarm.

Activate: the settings include:

• Once for a single alarm,

• Daily for each day,

• Off to cancel.

‘ Press

to put the TV set in standby.

It will automatically come on at the

time programmed.

If you leave the TV set on, it will just

change programmes at the time entered

(and will go to standby mode at the Stop

Time).

Timer function

TV Menu

Picture

Sound

Features

Install

Timer

Sleep

Time

Start Time

Stop Time

Program No.

Activate

10:56

12

Using the PIP (Picture-in-Picture) feature

“ Use the keys to select PIP

‘ Use the /

key to enter PIP menu.

( Use the keys to select PIP menu items.

§ Use the keys to access the PIP

menu items, make the following adjustments

or options.

è To exit the PIP screen, select PIP Size.

followed by the Off option.

Definitions of PIP items

PIP Size : Select your PIP size (Off, Small,

Medium, Large and Side-by-

Side).

Horizontal :

Move the PIP screen horizontally

from left to right and vice-versa.

Vertical :

Move the PIP screen vertically

from top to bottom and vice-versa.

HDMI : If HDMI 1 or HDMI 2 are both

connected, you can only select

one source, HDMI 1 or HDMI 2.

Accessing the PIP screen via the PIP key

& Press the

key on the remote control

to display PIP screen. A small PIP screen

will appear on the TV screen.

é Press the

key a second time to change

the small PIP screen to a medium PIP screen

size.

“ Press the

key a third time to change the

medium PIP screen to large PIP screen size.

‘ Press the

key a fourth time to change

the large PIP screen to a Side-by-Side (a TV

screen on one side and the PIP screen on the

other side).

(

Press the

key a fifth time exit PIP screen.

The PIP (Picture-in-Picture) feature allows you

to call up a PIP screen of the PC (Personal

Computer) or HD (High Defintion) device

while watching a TV programme.

IMPORTANT

To call up a PIP screen of the PC equipment,

the following step must be taken :

HDMI 1 or HDMI 2 input MUST be

connected

to the DVI output of the PC equipment. Use a

HDMI/DVI cable to do the connection.

To call up a PIP screen of the HD equipment,

the following steps must be taken :

HDMI 1 or HDMI 2 input MUST be

connected

to the HDMI output of the HD equipment.

NOTE

• While you are watching TV programmes, you

can only call up a PIP screen from only one

source.

• Go to the PIP menu and select HDMI. See

below on how to access the PIP menu.

• Select HDMI 1 or HDMI 2 depending on

connection.

Accessing the PIP screen via the PIP menu

& Press the key to display main menu.

é With the key, select Features and

the /

key to enter the Features

menu.

TV Menu

Picture

Sound

Features

Install

Features

Timer

Contrast+

NR

PIP

• PIP Size

• Horizontal

• Vertical

• HDMI

PIP

PIP Size

Horizontal

Vertical

HDMI

Off

NOTE

For more details on connections

to the PC and HD equipment,

see

CONNECTION GUIDE.

PIP

PIP Size

Horizontal

Vertical

HDMI

HDMI 1

PIP

PIP Size

Horizontal

Vertical

HDMI

HDMI 2

13

Screen Formats

The pictures you receive may be transmitted in 16:9 format (wide screen) or 4:3 format (conventional

screen). 4:3 pictures sometimes have a black band at the left and right of the screen. This function

allows you to optimise the picture display on screen.

Press the

key (or ) to select the different modes. This TV set is also equipped with

automatic turning which will select the correct-screen format, provided the specific signals are

transmitted with the programmes.

4:3

The picture is reproduced in 4:3 format and a black band is displayed

on either side of the picture.

Movie expand 14:9

The picture is enlarged to 14:9 format, a thin black band remains on

both sides of the picture.

Movie expand 16:9

The picture is enlarged to 16:9 format. This mode is recommended

when displaying pictures which have black bands at the top and bottom

(letterbox format).

Subtitle Zoom

This mode is used to display 4:3 pictures using the full surface of the

screen leaving the sub-titles visible.

Superzoom

This mode is used to display 4:3 pictures using the full surface of the

screen by enlarging the sides of the picture.

Widescreen

The picture is displayed in the correct proportions of images

transmitted in 16:9.

Note: If you display a 4:3 picture in this mode, it will be enlarged

horizontally.

14

Using the Smart Picture and Sound features

Using the Active Control feature

Active Control feature automatically adjusts

the picture setting for optimal picture quality

continuously under any signal conditions.

& Press the key repeatedly to toggle

between Active Control Off and Active

Control

On

options.

Active Control On

Active Control Off

é Select the Active Control On option to

activate the Active Control feature.

“ Select the Active Control Off option to

deactivate the Active Control feature.

Smart Picture feature offers you a choice of 5

picture settings namely : Rich, Natural, Soft,

Multimedia and Personal.

Press the

button repeatedly to cycle

through the settings to select your desired mode.

Smart Sound feature offers you a choice of 4

sound settings namely : Theatre, Music, Voice,

and Personal.

Press the

button repeatedly to cycle

through the settings to select your desired mode.

Rich

or

Personal

Multimedia

Natural

Soft

Theatre

or

Music

Voice

Personal

Definition of Picture Settings

Rich : Brilliant and sharp picture settings

suitable for bright environment and

for use in demonstrations to show

off the quality of the TV on good

sources.

Natural : Reference mode for living room

conditions and average signals.

Soft : Intended for bad-quality signals.

Suitable for living room viewing.

Multimedia : Best for graphical applications.

Personal : Pictures settings are set to your

preference.

Definition of Sound Settings

Theatre : Emphasize sensation to action (Bass

and Treble boosted).

Music : Emphasize low tone (Bass boosted).

Voice :

Emphasize high tone (Treble boosted).

Personal : Sound settings are set to your

preference.

NOTE : The Personal setting is the setting that

you set up using the Picture/Sound menu in the

main menu. This is the only setting in the Smart

Picture/Sound settings that can be changed. All

other settings are pre-set at the factory.

15

Teletext

Teletext is an information system broadcast by certain channels which can be consulted like a newspaper.

It also offers access to subtitles for viewers with hearing problems or who are not familiar with the

transmission language (cable networks, satellite channels, etc.).

Teletext call

1

Selecting a page

2

Direct access to

the items

3

Contents

4

5

Sub-page display

Double page

teletext

6

7

Hidden

information

Enlarge a page

8

9

Favourite pages

3

6

2

4

5

1

AUX

9

7

8

2

AUX

9

This is used to switch on or off teletext display. The

summary appears with a list of items that can be accessed.

Each item has a corresponding 3 digit page number. If

channel selected does not broadcast teletext, the

indication 100 will be displayed and the screen will remain

blank. Proceed to exit teletext and select another channel.

Enter the number of the page required using the 0 to 9

keys or P –/+ keys. Example: page 120, enter 120. The

number is displayed at the top left corner of the screen.

When the page is located, the counter stops searching.

Repeat this operation to view another page. If the counter

continues to search, this means that the page is not

transmitted. Select another number.

Coloured areas are displayed at the bottom of the

screen. The 4 colour keys are used to access the items or

corresponding pages. The coloured areas flash when the

item or the page is not yet available.

This returns you to the contents page (usually page 100).

Certain pages contain sub-pages which are automatically

displayed successively. This key is used to stop or resume

sub-page display. The indication

appears top left. Use

the

keys to select previous or next sub-page.

No Function. Not applicable.

To display or hide the concealed information (games

solutions).

This allows you to display the top or bottom part of the

page. Pressing it again will return the page to normal size.

Instead of the standard coloured areas displayed at the

bottom of the screen, you can store 4 favourite pages on

the first 40 channels which can then be accessed using the

coloured keys (red, green, yellow, blue). Once set, these

favourite pages will become the default every time teletext

is selected.

1. Press the

key to change to favourite

pages mode..

2. Use the

/

keys to enter the teletext

page that you want to store as a favourite page.

3. Press and hold the colour key of your choice for about 5

seconds. The page is now stored.

4. Repeat steps 2 to 3 with the other coloured keys.

5. To exit favourite page mode, press the

key.

6. To exit teletext mode, press

the key.

NOTE : To clear favourite pages, press and hold

key for about 5 seconds.

16

Using the TV as a PC Monitor

Your TV can be used as a computer monitor.

IMPORTANT

For the TV to function as PC monitor, the

following steps must be taken :

& HDMI 1 or HDMI 2 input MUST be

connected to the DVI output of the PC.

Use a DVI to HDMI adaptor to do the

connection.

é Press the

key to display Source

List and

use the key to select HDMI 1 or

HDMI 2

.

“

Use the

/

key to switch to the selected

source

.

Using the PC menus

&

Press the

key to display the PC menu.

é Use the key to access the settings

and the key to select or adjust setting

(the settings are automatically saved):

Description Picture settings

Brightness / Contrast :

– Adjusts the brightness and contrast.

Colour Temp :

– Changes the colour rendering : Cool (bluer),

Normal (balance) or Warm (redder).

Audio Selection :

– Chooses the sound reproduced on the TV (PC

or TV).

Description of Features

Format :

– Chooses between full screen or native format

of the PC screen.

PIP (Picture-in Picture) :

– Displays a PIP screen to watch TV programmes

at the same time.

* Mode Selection :

– When you connect PC or HD equipment

supporting resolutions of 480p, 576p or

720p, the Mode Selection in the Features

menu will be highlighted. This will allow you to

select between the PC and HD mode. If

it does not support the 480p, 576p or 720p

resolutions, you cannot access this function.

Using the PIP feature

The PIP (Picture-in-Picture) feature allows you to

call up a PIP screen of a TV programme while you

are in PC mode.

IMPORTANT

To call up a PIP screen of the TV programme,

the

following step must be taken :

HDMI 1 or HDMI 2 input MUST be connected

to the DVI output of the PC equipment. Use a

HDMI to DVI adaptor cable to do the connection.

The PIP menu items : PIP Size, Horizontal

and Vertical works in exactly the same way as

when calling a PIP screen in TV mode. Except for

HDMI, there is no selection for other source.

For description of PIP menu items and how it

works, refer to the section on “Using the PIP

(Picture-in Picture) Feature” page 12.

Source

TV

EXT 1

EXT 2 / SVHS2

EXT 3 / SVHS3

EXT 4

HDMI 1

HDMI 2

Source

TV

EXT 1

EXT 2 / SVHS2

EXT 3 / SVHS3

EXT 4

HDMI 1

HDMI 2

NOTE

For more details on connection to the

PC equipment,

see CONNECTION

GUIDE.

Supported PC Resolutions

640 x 480, 60 Hz 800 x 600, 72 Hz

640 x 480, 67 Hz 800 x 600, 75 Hz

640 x 480, 72 Hz 1024 x 768, 60 Hz

640 x 480, 75 Hz 1024 x 768, 70 Hz

800 x 600, 56 Hz 1024 x 768, 75 Hz

800 x 600, 60 Hz

PIP

PIP Size

Horizontal

Vertical

HDMI

Í

No Selection

La pagina si sta caricando...

Philips 32PF7411/10 Manuale utente

Questo manuale è adatto anche per

Philips 32PF7411/10 Manuale utente

in altre lingue

Documenti correlati

Altri documenti